Nanoflake-like SnS2 matrix for glucose biosensing based on direct electrochemistry of glucose oxidase

Selective and stable visible-light-prompted scavenger-free photoelectrochemical strategy based on a ternary ErVO4/P@g-C3N4/SnS2 nanocomposite for the detection of lead ions in different water samples

Lead ions (Pb2+) are heavy metal environmental pollutants that can significantly impact biological health. In this study, the synthesis of a ternary nanocomposite, ErVO4/P@g-C3N4/SnS2, was achieved using a combination of hydrothermal synthesis and mechanical grinding. The as-fabricated photoelectrochemical (PEC) sensor was found to be an ideal substrate for Pb2+ detection with high sensitivity and reliability. The ErVO4/P@g-C3N4/SnS2/FTO was selected as the substrate because of its remarkable and reliable photocurrent response. The Pb2+ sensor exhibited a low detection limit of 0.1 pM and a broad linear range of 0.002-0.2 nM. Moreover, the sensor exhibited outstanding stability, selectivity, and reproducibility. In real-time applications, it exhibited stable recovery and a low relative standard deviation, ensuring reliable and accurate measurements. The as-prepared PEC sensor was highly stable for the detection of Pb2+ in different water samples. This promising characteristic highlights its significant potential for use in the detection of environmental pollutants.

A MOF nanozyme-mediated acetylcholinesterase-free colorimetric strategy for direct detection of organophosphorus pesticides

Although some simple and rapid colorimetric methods have been developed to detect organophosphorus pesticides (OPs), the difficult extraction and easy denaturation of acetylcholinesterase (AChE) are still drawbacks needing to be overcome. Here, we propose a MOF nanozyme-mediated AChE-free colorimetric strategy for the direct detection of OPs. In the presence of OPs (pirimiphos-methyl as a model), the intense blue of oxidized 3,3',5,5'-tetramethylbenzidine (TMB) becomes light due to the quenching effect of OPs towards hydroxyl radicals (˙OH) that are generated by the decomposition of H2O2 catalyzed by the Cu4Co6 ZIF nanozyme with excellent peroxidase (POD)-like activity. The developed colorimetric sensor exhibits assay performance and offers a universal and promising analysis strategy for detecting OPs in practical samples.

Breathable MOFs Layer on Atomically Grown 2D SnS2 for Stable and Selective Surface Activation

2D transition metal dichalcogenides (TMDs) have significant research interests in various novel applications due to their intriguing physicochemical properties. Notably, one of the 2D TMDs, SnS2 , has superior chemiresistive sensing properties, including a planar crystal structure, a large surface-to-volume ratio, and a low electronic noise. However, the long-term stability of SnS2 in humid conditions remains a critical shortcoming towards a significant degradation of sensitivity. Herein, it is demonstrated that the subsequent self-assembly of zeolite imidazolate framework (ZIF-8) can be achieved in situ growing on SnS2 nanoflakes as the homogeneous porous materials. ZIF-8 layer on SnS2 allows the selective diffusion of target gas species, while effectively preventing the SnS2 from severe oxidative degradation. Molecular modeling such as molecular dynamic simulation and DFT calculation, further supports the mechanism of sensing stability and selectivity. From the results, the in situ grown ZIF-8 porous membrane on 2D materials corroborates the generalizable strategy for durable and reliable high-performance electronic applications of 2D materials.

Fabrication of glucose bioelectrochemical sensor based on Au@Pd core-shell supported by carboxylated graphene oxide

The study presents a novel electrochemical glucose biosensor based on glucose oxidase (GOx) immobilized on Au@Pd core-shell nanoparticles supported on carboxylated graphene oxide (cGO). The immobilization of GOx was achieved by cross-linking the chitosan biopolymer (CS) including Au@Pd/cGO and glutaraldehyde (GA) on a glassy carbon electrode. The analytical performance of GCE/Au@Pd/cGO-CS/GA/GOx was investigated using amperometry. The biosensor had fast response time (5.2 ± 0.9 s), a satisfactory linear determination range between 2.0 × 10^-5 and 4.2 × 10^-3 M, and limit of detection of 10.4 μM. The apparent Michaelis-Menten constant (K_app) was calculated as 3.04 mM. The fabricated biosensor also exhibited good repeatability, reproducibility, and storage stability. No interfering signals from dopamine, uric acid, ascorbic acid, paracetamol, folic acid, mannose, sucrose, and fructose were observed. The large electroactive surface area of carboxylated graphene oxide is a promising candidate for sensor preparation.

A novel electrochemical immunosensor based on SnS2/NiCo metal-organic frameworks loaded with gold nanoparticles for cortisol detection

In this work, a label-free electrochemical immunosensor using tin sulfide/nickel cobalt metal-organic frameworks (SnS₂/NiCo MOFs) was established for the sensitive etection of cortisol. First, SnS₂/NiCo MOFs were synthesized by doping SnS₂ with NiCo MOF nanocubes by a hydrothermal method. Then, gold nanoparticles (AuNPs) were grown in situ on SnS₂/NiCo MOFs for electrochemical detection. The use of SnS₂/NiCo MOFs promoted the electron transfer rate of AuNPs and enhanced the electrochemical sensing performance of AuNPs@SnS₂/NiCo MOFs-modified electrodes. The large specific surface area of AuNPs@SnS₂/NiCo MOFs provides more active sites for antibody loading. After the prepared immunosensor was incubated with the target analyte, cortisol, the electron transfer impedance increased and the amperometric response decreased, thus establishing a highly sensitive immunosensing method. The sensor had a linear range of 100 fg/mL to 100 ng/mL and a low detection limit of 29 fg/mL. The sensor showed good accuracy and practicability and could be used for the determination of cortisol in saliva.

Engineering exposed vertical nano-TiO2 (001) facets/BiOI nanosheet heterojunction film for constructing a satisfactory PEC glucose oxidase biosensor

In the field of photoelectrochemical (PEC) enzyme biosensors, constructing efficient photoelectrodes, in which the recombination of photogenerated carriers is an important factor affecting the performance, is of great significance. Herein, to enhance the separation efficiency of photogenerated carriers, titanium dioxide (TiO₂) nanosheet (NS)/bismuth oxyiodide (BiOI) NS/glucose oxidase (GOx) composites were prepared via hydrothermal and solvothermal methods. Single-crystal anatase TiO₂ NSs with a high percentage of (001) facets lead to better photocarrier separation due to heterojunctions between facets. After coupling with BiOI NSs, the photoelectrochemical performance of the electrode was greatly improved. The photogenerated electrons from TiO₂ and BiOI gathered at TiO₂ (101) and were exported through the fluorine-doped tin oxide (FTO) substrate to generate electrical signals. Photogenerated holes were transferred to TiO₂ (001) and BiOI to participate in the enzymatic reaction, showing the outstanding separation of electrons and holes. The prepared TiO₂ NS/BiOI NS/GOx glucose biosensor achieved satisfactory results, with sensitivity of 14.25 μA mM⁻¹ cm⁻², a linear measurement range of 0–1 mM, and a limit of detection (3S/N) of 0.01 mM in phosphate buffered saline (PBS) at a pH of 7.4. The mechanism for the efficient separation of photogenerated carriers based on the facet heterojunctions introduced in this paper also provides new insights into other optoelectronic biosensors.

Demonstration of the mechanism based on the synergistic effect of TiO₂ facet heterojunctions and TiO₂/BiOI heterojunctions to promote efficient separation of photogenerated carriers.

Urchin-like PtNPs@Bi2S3: synthesis and application in electrochemical biosensor

Novel urchin-like Pt nanoparticles@Bi2S3 composite materials were prepared by a simple route. The composite nanomaterial was used to modify an electrode for the immobilization of enzyme molecules to construct a sensitive electrochemical biosensor.

Low dimensional materials for glucose sensing

Biosensors are essential components for effective healthcare management. Since biological processes occur on molecular scales, nanomaterials and nanosensors intrinsically provide the most appropriate landscapes for developing biosensors. Low-dimensional materials have the advantage of offering high surface areas, increased reactivity and unique physicochemical properties for efficient and selective biosensing. So far, nanomaterials and nanodevices have offered significant prospects for glucose sensing. Targeted glucose biosensing using such low-dimensional materials enables much more effective monitoring of blood glucose levels, thus providing significantly better predictive diabetes diagnostics and management. In this review, recent advances in using low dimensional materials for sensing glucose are summarized. Sensing fundamentals are discussed, as well as invasive, minimally-invasive and non-invasive sensing methods. The effects of morphological characteristics and size-dependent properties of low dimensional materials are explored for glucose sensing, and the key performance parameters such as selectivity, stability and sensitivity are also discussed. Finally, the challenges and future opportunities that low dimensional materials can offer for glucose sensing are outlined.

Facile synthesis of a nanorod-like MoS2 nanostructure for sensitive electrochemical biosensing application

A novel nanorod-like MoS2 semiconductor nanostructure was synthesized through a simple two-step method. The nanorod-like MoS2 nanostructure was exploited as an electrode material to immobilize enzymes and for electrochemical sensing application. Characterization of the nanorod-like MoS2 nanostructure and the resultant biosensor was performed by scanning electron microscopy, Fourier transform infrared spectroscopy, electrochemical impedance spectroscopy, and cyclic voltammetry. Enzyme molecules loaded at the MoS2 nanostructure retained their native structure and bioactivity. The direct electron transfer of glucose oxidase at the MoS2 nanostructure coated glassy carbon electrode was enhanced greatly. At an optimal potential of -0.45 V, the electrochemical glucose sensor had wide linear ranges of 1.5 × 10-5-3.25 × 10-4 M and 3.25 × 10-4-1.43 × 10-3 M, and a low detection limit of 0.005 mM (S/N = 3) with a high sensitivity of 25.06 ± 0.5 mA M-1 cm-2. At the same time, the present biosensor showed excellent selectivity, reproducibility and stability for glucose. What's more, the biosensor was successfully applied to the determination of practical samples.

Synthesis of a novel hedgehog-shaped Bi2S3 nanostructure for a sensitive electrochemical glucose biosensor

A novel hedgehog-shaped Bi2S3 nanostructure was synthesized using a simple hydrothermal route with a composite soft template and further used to construct a sensitive glucose biosensor.

Photoelectrochemical enzymatic sensor for glucose based on Au@C/TiO2 nanorod arrays

In this work, a photoelectrochemical (PEC) glucose biosensor was synthesized on the basis of a type of Au@C/TiO₂ composite by using an unsophisticated secondary hydrothermal strategy. The compounded Au@C/TiO₂ material was characterized by XRD, SEM, TEM, UV-vis, and XPS to identify the composition and the purity of the phase. Glucose oxidase (GODx) was immobilized on the Au@C/TiO₂. The PEC biosensor presented satisfactory stability and outstanding reproducibility. The range and the sensitivity of the linear measurement were 0.1–1.6 mM and 29.76 μA mM⁻¹ cm⁻², respectively, and the detection limit was low (0.049 mM). The GODx/Au@C/TiO₂/FTO biosensor presented excellent efficiency in detecting glucose, suggesting the great potential application of this synthesized material in PEC biosensors.

In this work, a photoelectrochemical (PEC) glucose biosensor was synthesized on the basis of a type of Au@C/TiO₂ composite by using an unsophisticated secondary hydrothermal strategy.

Boric-acid-modified Fe3O4@PDA@UiO-66 for enrichment and detection of glucose by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry

Herein, boric-acid-modified multifunctional Zr-based metal-organic frameworks (denoted as Fe₃O₄@PDA@B-UiO-66) were synthesized by hydrothermal reaction and surface modification. Compared to traditional matrix, Fe₃O₄@PDA@B-UiO-66 has the advantages of high ionization efficiency, high surface area, low matrix background, porous structure, and numerous boric-acid-active sites. By combining matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF MS), Fe₃O₄@PDA@B-UiO-66 was used as an adsorbent and matrix for enrichment and detection of glucose, based on a specific reaction between boric acid and glucose. The limit of detection was 58.5 nM. The proposed method provides a simple and efficient approach for the sensitive and quantitative detection of glucose in complex samples based on MALDI-TOF MS. Design and synthesis of boric-acid-modified multifunctional magnetic metal-organic frameworks (designated as Fe₃O₄@PDA@B-UiO-66) applied as adsorbent and matrix for the matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF MS) analysis of glucose in complex biosamples.

Tin disulfide-graphene oxide-β-cyclodextrin mediated electro-oxidation of melatonin hormone: an efficient platform for electrochemical sensing

Here, we have developed an electrochemical sensor based on integrated 2D materials including tin disulfide (SnS2) nanoflakes, graphene oxide (GO), and β-cyclodextrin (β-CD) forming a ternary nanocomposite decorated on a screen-printed electrode (SPE) for the electrochemical detection of melatonin. Hydrothermally synthesized SnS2 was mixed with GO/β-CD to prepare the ternary composite via an ultra-sonication process. The nanocomposite was characterized using X-ray diffraction (XRD), field emission scanning electron microscopy (FE-SEM), and field emission transmission electron microscopy (FEG-TEM). The electrochemical performance of the modified electrode was investigated using cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS), and differential pulse voltammetry (DPV). The electrochemical sensor exhibited a linearity range from 1 nM to 100 μM with the lowest detection limit of 0.17 nM. The sensor was successfully applied for the detection of melatonin in commercial drugs and human saliva, which showed a consistent result with the Enzyme-Linked Immuno-Sorbent Assay (ELISA).

Constructing a TiO2/PDA core/shell nanorod array electrode as a highly sensitive and stable photoelectrochemical glucose biosensor

Developing stable PEC glucose biosensors with high sensitivity and low detection limit is highly desirable in the biosensor field. Herein, a highly stable and sensitive enzymatic glucose photoelectrochemical biosensor is rationally designed and fabricated by constructing TiO₂/PDA core/shell nanorod arrays. The TiO₂ nanorod as the core has the advantages of increasing charge transportation towards interfaces and enhancing the absorption of incident sunlight due to its single-crystal nature and one dimensional array structure. The PDA shell not only induces a rapid charge transfer across the interfaces but also stabilizes the biosensor performance by avoiding the decomposition of enzymes induced by the strong oxidizing holes from the TiO₂ core. A remarkable performance with an ultrahigh sensitivity of 57.72 μA mM⁻¹ cm⁻², a linear range of 0.2–1.0 mM, a glucose detection limit of 0.0285 mM (S/N = 3) and a high sensitivity of 8.75 μA mM⁻¹ cm⁻² in a dynamic range of 1.0–6.0 mM were obtained for the glucose detection. This study might provide a strategy for constructing inorganic/organic core/shell structures with a satisfactory PEC performance.

Developing stable PEC glucose biosensors with high sensitivity and low detection limit is highly desirable in the biosensor field.

3D Hydrogen Titanate Nanotubes on Ti Foil: A Carrier for Enzymatic Glucose Biosensor

Glucose oxidase (GOx) based biosensors are commercialized and marketed for the high selectivity of GOx. Incorporation nanomaterials with GOx can increase the sensitivity performance. In this work, an enzyme glucose biosensor based on nanotubes was fabricated. By using Ti foil as a carrier, hydrogen titanate nanotubes (HTNTs), which present fine 3D structure with vast pores, were fabricated in-situ by the hydrothermal treatment. The multilayer nanotubes are open-ended with a diameter of 10 nm. Then glucose oxidase (GOx) was loaded on the nanotubes by cross-linking to form an electrode of the amperometric glucose biosensor (GOx/HTNTs/Ti electrode). The fabricated GOx/HTNTs/Ti electrode had a linear response to 1-10 mM glucose, and the response time was 1.5 s. The sensitivity of the biosensor was 1.541 μA·mM-1·cm-2, and the detection limit (S/N = 3) was 59 μM. Obtained results indicate that the in-situ fabrication and unique 3D structure of GOx/HTNTs/Ti electrode are beneficial for its sensitivity.

Multiwalled carbon nanotubes coated with cobalt(II) sulfide nanoparticles for electrochemical sensing of glucose via direct electron transfer to glucose oxidase

Multiwalled carbon nanotubes coated with cobalt(II) sulfide nanoparticles were prepared and used for immobilization of glucose oxidase (GOx) to obtain an electrochemical glucose biosensor. The nanocomposite was synthesized through an in-situ hydrothermal method and characterized by X-ray diffraction, scanning electron microscopy, transmission electron microscopy, and electrochemical impedance spectroscopy. The results show that the nanocomposite possesses a large specific surface area and apparently enhances the direct electron transfer between GOx and the surface of the electrode, best at a potential near -0.43 V (vs. SCE). The immobilized GOx retains its good bioactivity even at a high surface coverage of 30 pmol cm^-2. Under the optimum conditions. The biosensor exhibits a wide linear range (from 8 μM to 1.5 mM), a high sensitivity (15 mA M ^-1 cm^-2), and a 5 μM detection limit (at S/N = 3). The sensor is selective, acceptably repeatable, specific and stable. Graphical abstractMultiwalled carbon nanotubes coated with cobalt(II) sulfide nanoparticles (CoS-MWCNTs) were synthesized through in situ hydrothermal method for the construction of a sensitive electrochemical glucose biosensor.

A streptavidin-functionalized tin disulfide nanoflake-based ultrasensitive electrochemical immunosensor for the detection of tumor markers

Universal and novel streptavidin-functionalized tin disulfide nanoflakes (SnS₂ NFs) have been explored for the first time to develop an ultrasensitive electrochemical immunosensor for the detection of tumor markers.

Salivary Electrochemical Cortisol Biosensor Based on Tin Disulfide Nanoflakes

Cortisol, a steroid hormone, is secreted by the hypothalamic-pituitary-adrenal system. It is a well-known biomarker of psychological stress and is hence known as the "stress hormone." If cortisol overexpression is prolonged and repeated, dysfunction in the regulation of cortisol eventually occurs. Therefore, a rapid point-of-care assay to detect cortisol is needed. Salivary cortisol electrochemical analysis is a non-invasive method that is potentially useful in enabling rapid measurement of cortisol levels. In this study, multilayer films containing two-dimensional tin disulfide nanoflakes, cortisol antibody (C-M_ab), and bovine serum albumin (BSA) were prepared on glassy carbon electrodes (GCE) as BSA/C-M_ab/SnS₂/GCE, and characterized using electrochemical impedance spectroscopy and cyclic voltammetry. Electrochemical responses of the biosensor as a function of cortisol concentrations were determined using cyclic voltammetry and differential pulse voltammetry. This cortisol biosensor exhibited a detection range from 100 pM to 100 μM, a detection limit of 100 pM, and a sensitivity of 0.0103 mA/Mcm² (R² = 0.9979). Finally, cortisol concentrations in authentic saliva samples obtained using the developed electrochemical system correlated well with results obtained using enzyme-linked immunosorbent assays. This biosensor was successfully prepared and used for the electrochemical detection of salivary cortisol over physiological ranges, based on the specificity of antibody-antigen interactions.

A TiO2–SnS2 nanocomposite as a novel matrix for the development of an enzymatic electrochemical glucose biosensor

A TiO₂–SnS₂ nanocomposite was prepared and for the first time used to construct a novel electrochemical enzymatic glucose biosensor based on the direct electrochemistry of glucose oxidase (GOx).

Recent advances in designing nanomaterial based biointerfaces for electrochemical biosensing cardiovascular biomarkers

Early diagnosis of cardiovascular disease (CVD) is critically important for successful treatment and recovery of patients. At present, detection of CVD at early stages of its progression becomes a major issue for world health. The nanoscale electrochemical biosensors exhibit diverse outstanding properties, rendering them extremely suitable for the determination of CVD biomarkers at very low concentrations in biological fluids. The unique advantages offered by electrochemical biosensors in terms of sensitivity and stability imparted by nanostructuring the electrode surface together with high affinity and selectivity of bioreceptors have led to the development of new electrochemical biosensing strategies that have introduced as interesting alternatives to conventional methodologies for clinical diagnostics of CVD. This review provides an updated overview of selected examples during the period 2005-2018 involving electrochemical biosensing approaches and signal amplification strategies based on nanomaterials, which have been applied for determination of CVD biomarkers. The studied CVD biomarkers include AXL receptor tyrosine kinase, apolipoproteins, cholesterol, C-reactive protein (CRP), D-dimer, fibrinogen (Fib), glucose, insulin, interleukins, lipoproteins, myoglobin, N-terminal pro-B-type natriuretic peptide (BNP), tumor necrosis factor alpha (TNF-α) and troponins (Tns) on electrochemical transduction format. Identification of new specific CVD biomarkers, multiplex bioassay for the simultaneous determination of biomarkers, emergence of microfluidic biosensors, real-time analysis of biomarkers and point of care validation with high sensitivity and selectivity are the major challenges for future research.

A Novel Glucose Biosensor Based on Hierarchically Porous Block Copolymer Film

Enzymatic biosensors are widely used in clinical diagnostics, and electrode materials are essential for both the efficient immobilization of enzyme and the fast electron transfer between the active sites of enzyme and electrode surface. Electrode materials with a hierarchically porous structure can not only increase the specific surface area but also promote the electron transfer, facilitating the catalysis reaction. Block copolymer is a good candidate for preparation of film with a hierarchically porous structure due to its unique characteristics of self-assembly and phase separation. In the current work, hierarchically porous block copolymer film containing both micropores and nanopores was prepared by spinodal decomposition induced phase separation. The resultant copolymer film was adopted as the electrode material to immobilize glucose oxidase (GOx) for construction of an enzyme biosensor. Scanning electron microscopy (SEM), contact angle (CA) measurements, and Fourier-transform infrared (FTIR) and electrochemical impendence spectroscopy (EIS) were adopted to investigate the microstructure of the as-developed biosensor. Results demonstrated that the hierarchically porous block copolymer film offered a favorable and biocompatible microenvironment for proteins. These as-prepared glucose biosensors possessed a wide linear range (10⁻4500 μM), a low detection limit (0.05 μM), quick response (2 s), excellent stability, and selectivity. This work demonstrates that hierarchically porous block copolymer film is a good matrix candidate for the immobilization of the enzyme and provides a potential electrode material to construct novel biosensors with excellent performance.

Eco-friendly synthesis of SnSe nanoparticles: effect of reducing agents on the reactivity of a Se-precursor and phase formation of SnSe NPs

Tin monoselenide (SnSe) nanoparticles (NPs) have great potential to replace the conventional absorbers used in the fabrication of thin film solar cells.

Magnetic Nanoparticle-Reduced Graphene Oxide Nanocomposite as a Novel Bioelectrode for Mediatorless-Membraneless Glucose Enzymatic Biofuel Cells

In this work, an enzymatic biofuel cell (EBC) based on a membraneless and mediatorless glucose enzymatic fuel cell system was constructed for operation in physiological conditions (pH 7.0 and temperature 37 °C). The new platform EBC made of nanocomposite, including magnetic nanoparticles (Fe₃O₄ NPs) and reduced graphene oxide (RGO), was used for the immobilization of glucose oxidase (GOD) as bioanode and bilirubin oxidase (BOD) as biocathode. The EBC bioelectrodes were fabricated without binder or adhesive agents for immobilized enzyme and the first EBC using superparamagnetic properties with Fe₃O₄ NPs has been reported. The performance of the EBC was evaluated with promising results. In EBC tests, the maximum power density of the EBC was 73.7 μW cm⁻² and an open circuit voltage (OCV) as +0.63 V with 5 mM of glucose concentration for the physiological condition of humans. The Fe₃O₄-RGO nanocomposite offers remarkable enhancement in large surface areas, is a favorable environment for enzyme immobilization, and facilitates electron transfer between enzymes and electrode surfaces. Fe₃O₄ and RGO have been implied as new promising composite nanomaterials for immobilizing enzymes and efficient platforms due to their superparamagnetism properties. Thus, glucose EBCs could potentially be used as self-powered biosensors or electric power sources for biomedical device applications.

An Enzymatic Glucose Sensor Composed of Carbon-Coated Nano Tin Sulfide

In this study, a biosensor, based on a glucose oxidase (GO_x) immobilized, carbon-coated tin sulfide (SnS) assembled on a glass carbon electrode (GCE) was developed, and its direct electrochemistry was investigated. The carbon coated SnS (C-SnS) nanoparticle was prepared through a simple two-step process, using hydrothermal and chemical vapor deposition methods. The large reactive surface area and unique electrical potential of C-SnS could offer a favorable microenvironment for facilitating electron transfer between enzymes and the electrode surface. The structure and sensor ability of the proposed GO_x/C-SnS electrode were characterized using scanning electron microscopy (SEM), X-ray diffraction (XRD), Raman spectroscopy, UV-vis spectroscopy, Fourier transform infrared spectroscopy (FTIR), and cyclic voltammetry study (CV).

Decoration of reduced graphene oxide with rhodium nanoparticles for the design of a sensitive electrochemical enzyme biosensor for 17β-estradiol

A novel nanocomposite material consisting of reduced graphene oxide/Rh nanoparticles was prepared by a one-pot reaction process. The strategy involved the simultaneous reduction of RhCl₃ and graphene oxide with NaBH₄ and the in situ deposition of the metal nanoparticles on the 2D carbon nanomaterial planar sheets. Glassy carbon electrode coated with this nanocomposite was employed as nanostructured support for the cross-linking of the enzyme laccase with glutaraldehyde to construct a voltammperometric biosensor for 17β-estradiol in the 0.9-11 pM range. The biosensor showed excellent analytical performance with high sensitivity of 25.7AµM^-1cm^-1, a very low detection limit of 0.54pM and high selectivity. The biosensor was applied to the rapid and successful determination of the hormone in spiked synthetic and real human urine samples.

Construction of titanium dioxide nanorod/graphite microfiber hybrid electrodes for a high performance electrochemical glucose biosensor

The demand for a highly sensitive and selective glucose biosensor which can be used for implantable or on-time monitoring is constantly increasing. In this work, TiO2 nanorods were synthesized in situ on the surface of graphite microfibers to yield TiO2 nanorod/graphite microfiber hybrid electrodes. The TiO2 nanorods not only retain the high activity of the immobilized glucose molecule, but also promote the direct electron transfer process on the electrode surface. As a working electrode in an electrochemical glucose biosensor in a flowing system, the microfiber hybrid electrodes exhibit high sensitivity, selectivity and stability. Due to its simplicity, low cost, high stability, and unique morphology, the TiO2 nanorod/graphite microfiber hybrid electrode is expected to be an excellent candidate for an implantable biosensor or for in situ flow monitoring.

SnS2nanoflakes for efficient humidity and alcohol sensing at room temperature

We report a one step facile hydrothermal synthesis of layered SnS₂nanoflakes and its application as humidity and alcohol sensor.

Three-dimensional graphene-carbon nanotube hybrid for high-performance enzymatic biofuel cells

Enzymatic biofuel cells (EBFCs) are promising renewable and implantable power sources. However, their power output is often limited by inefficient electron transfer between the enzyme molecules and the electrodes, hindered mass transport, low conductivity, and small active surface area of the electrodes. To tackle these issues, we herein demonstrated a novel EBFC equipped with enzyme-functionalized 3D graphene-single walled carbon nanotubes (SWCNTs) hybrid electrodes using the naturally abundant glucose as the fuel and oxygen as the oxidizer. Such EBFCs, with high stability, can nearly attain the theoretical limit of open circuit voltage (∼1.2 V) and a high power density ever reported (2.27 ± 0.11 mW cm(-2)).