Electrochemical immunoassay for carcinoembryonic antigen based on signal amplification strategy of nanotubular mesoporous PdCu alloy

A dual-targeted electrochemical aptasensor for neuroblastoma-related microRNAs detection

Neuroblastoma (NB) is a significant pediatric cancer associated with high mortality rates, demanding innovative and appropriate approaches for its accurate detection. This paper described the design of a dual-target electrochemical aptasensor capable of simultaneously detecting neuroblastoma-associated microRNAs (miRNA-181 and miRNA-184) with exceptional sensitivity. Screen-printed carbon electrodes (SPCEs) were utilized with gold nanorods (AuNRs), and aptamers functionalized gold nanoparticles (AuNPs) to improve sensitivity, specificity, and portable detection ability. The detection method employed in this study includes differential pulse voltammetry (DPV) and cyclic voltammetry (CV). Our aptasensor exhibited remarkable limits of detections (LODs) of 5.10 aM for miRNA-181 and 9.39 aM for miRNA-184, respectively, along with a broad linear range spanning from 0.1 fM to 100 pM for both miRNAs. The practical significance of neuroblastoma diagnosis was shown through the validation of serum samples and comparison with quantitative polymerase chain reaction (qPCR). Our electrochemical aptasensor is user-friendly, easy to engineer, and offers a promising approach for accurately and selectively detecting important miRNA biomarkers in cancer screening and diagnosis, showing potential application in various clinical scenarios.

A performance improvement of enzyme-based electrochemical lactate sensor fabricated by electroplating novel PdCu mediator on a laser induced graphene electrode

A lactate sensor for lactate sensing using porous laser-induced graphene (LIG) electrodes with an electrodeposited PdCu catalyst was developed in this study. CO₂ laser was used to convert the polyimide film surface to multilayered LIG. The morphology and composition of LIG were analyzed through field-emission scanning electron microscopy and Raman spectroscopy, respectively, to confirm that the fabricated LIG electrode was composed of porous and stacked graphene layers. PdCu was electrodeposited on the LIG electrode and lactate oxidase (LOx) was immobilized on the LIG surface to create a LOx/PdCu/LIG structure. According to the Randles-Ševčík equation, the calculated active surface area of the fabricated PdCu/LIG electrode was ∼12.8 mm², which was larger than the apparent area of PdCu/LIG (1.766 mm²) by a factor of 7.25. The measured sensitivities of the fabricated lactate sensors with the LOx/PdCu/LIG electrode were -51.91 μA/mM·cm² (0.1-5 mM) and -17.18 μA/mM·cm² (5-30 mM). The calculated limit of detection was 0.28 μM. The selectivity of the fabricated lactate sensor is excellent toward various potentially interfering materials such as ascorbic acid, uric acid, lactose, sucrose, K⁺ and Na⁺.

Construction of electrochemical immunosensors based on redox hydrogels for ultrasensitive detection of carcinoembryonic antigens

The introduction of cellulose nanocrystals (CNCs) endows a redox hydrogel with a larger specific surface area and better adhesion to an electrode.

An ultrasensitive label-free electrochemical immunosensor based on 3D porous chitosan-graphene-ionic liquid-ferrocene nanocomposite cryogel decorated with gold nanoparticles for prostate-specific antigen

A highly sensitive and selective label-free electrochemical immunosensor was successfully fabricated for measuring prostate-specific antigen (PSA). A composite of chitosan, graphene, ionic liquid and ferrocene (CS-GR-IL-Fc) was drop casted onto a screen-printed carbon electrode (SPCE) and frozen to create a layer of 3D porous cryogel (CS-GR-IL-Fc cry) which was decorated with gold nanoparticles (AuNPs). The biocompatibility and porosity of the cryogel increased the surface area available for AuNPs loading via amino groups and the population of anti-PSA, immobilized on the AuNPs via chemisorption, could be increased. The CS-GR-IL-Fc cry displayed excellent conductivity, enhancing electron transfer and amplifying the current signal. Differential pulse voltammetry was employed to determine PSA by measuring the reduction in the Fc oxidation peak current in response to the formation of PSA/anti-PSA immunocomplex. Under the optimized incubation time and electrolyte pH, the developed immunosensor displayed excellent analytical performances, including a wide linear range at concentrations from 1.0 × 10^-7 to 1.0 × 10^-1 ng mL^-1, with a very low limit of detection of 4.8 × 10^-8 ng mL^-1 and good reproducibility (relative standard deviation of <4.6%, n = 6), stability (90% sensitivity within 20 days), repeatability (12 cycles of binding-rebinding, the sensitivity > 90%) and selectivity. The results obtained from the device for the determination of PSA in human serum were consistent with results from the enzyme-linked immunosorbent assay (P > 0.05), and indicated the promising potential of the proposed immunosensor in clinical diagnosis.

Recent advances in graphene monolayers growth and their biological applications: A review

Development of two-dimensional high-quality graphene monolayers has recently received great concern owing to their enormous applications in diverging fields including electronics, photonics, composite materials, paints and coatings, energy harvesting and storage, sensors and metrology, and biotechnology. As a result, various groups have successfully developed graphene layers on different substrates by using the chemical vapor deposition method and explored their physical properties. In this direction, we have focused on the state-of-the-art developments in the growth of graphene layers, and their functional applications in biotechnology. The review starts with the introduction, which contains outlines about the graphene and their basic characteristics. A brief history and inherent applications of graphene layers followed by recent developments in growth and properties are described. Then, the application of graphene layers in biodevices is reviewed. Finally, the review is summarized with perspectives and future challenges along with the scope for future technological applications.

Polymeric immunosensors for tumor detection

Cancer is a broad-spectrum disease which is spread globally, having high mortality rates. This results from genetic, epigenetic and molecular abnormalities caused by various mutations. The main reason behind this critical problem lies in its diagnostics, the late detection of the disease is the root cause of all this. This can be managed well by the timely diagnosis of cancer by means of the tumor biomarkers present in the body fluids such as serum, blood, and urine. These tumor biomarkers are present in normal conditions as well, but their concentrations are altered in the presence of a malignant tumor. Prolonged studies have reported that immunosensors can be used to detect the minimal amount of biomarkers present in the sample and also provides point-of-care detection. The recent investigations demonstrated the use of polymers along with immunosensors for enhancing their selectivity and sensitivity towards the biomarkers and making them even more efficient. This review focuses on the variety of tumor biomarkers, different types of immunosensors and polymeric immunosensors using different polymers like polypyrrole, polyaniline, PHEMA, etc.

Label-free electrochemical immunoassay for neuron specific enolase based on 3D macroporous reduced graphene oxide/polyaniline film

The content of neuron specific enolase (NSE) in serum is considered to be an essential indicator of small cell lung cancer (SCLC). Here, a novel label-free electrochemical immunoassay for the detection of NSE based on the three dimensionally macroporous reduced graphene oxide/polyaniline (3DM rGO/PANI) film has been proposed. The 3DM rGO/PANI film was constructed by electrochemical co-deposition of GO and aniline into the interspaces of a sacrificial silica opal template modified Au slice. During the co-deposition, GO was successfully reduced by aniline and PANI could be deposited on the surfaces of rGO sheets. The ratio of rGO and PANI in the composite was also optimized to achieve the maximum electrochemical performance. The 3DM rGO/PANI composite provided larger specific surface area for the antibody immobilization, exhibited enhanced conductivity for electron transfer, and more important was that PANI acted as the electroactive probe for indicating the NSE concentration. Under the optimal conditions, a linear current response of PANI to NSE concentration was obtained over 0.5 pg mL^-1-10.0 ng mL^-1 with a detection limit of 0.1 pg mL^-1. Moreover, the immunosensor showed excellent selectivity, good stability, satisfactory reproducibility and regeneration, and was employed to detect NSE in clinical serum specimens.

Palladium-copper nanowires-based biosensor for the ultrasensitive detection of organophosphate pesticides

A highly sensitive acetylcholinesterase (AChE) electrochemical biosensor for the quantitative determination of organophosphate pesticides (OPs) in vegetables and fruits based on palladium-copper nanowires (Pd-Cu NWs) was reported. AChE immobilized on the modified electrode could catalyze hydrolysis of acetylthiocholine chloride (ATCl), generating an irreversible oxidation peak. When exposed to the OPs, the activity of the AChE was inhibited and the current significantly decreased. The detection mechanism is based on the inhibition of AChE. The Pd-Cu NWs not only provide a large active surface area (0.268 ± 0.01) cm² for the immobilization of AChE, which was approximately 3.8 times higher than the bare glass carbon electrode, but also exhibit excellent electro-catalytic activity and remarkable electron mobility. The biosensor modified with Pd-Cu NWs displayed a good affinity to ATCl and catalyzed hydrolysis of ATCl, with a low Michaelis-Menten constant (K_M) of 50.56 μM. Under optimized conditions, the AChE-Cs/Pd-Cu NWs/GCE biosensor detected malathion with wide linear ranges of 5-1000 ppt and 500-3000 ppb, and the low detection limit was 1.5 ppt (4.5 pM). In addition, the OPs biosensor has been applied to the analysis of malathion in commercial vegetable and fruit samples, with excellent recoveries in the range of 98.5%-113.5%. This work provides a simple, sensitive and effective platform for biosensors and exhibits future potential in practical application for the OPs assay.

Recent Advances in Electrochemical Immunosensors

Immunosensors have experienced a very significant growth in recent years, driven by the need for fast, sensitive, portable and easy-to-use devices to detect biomarkers for clinical diagnosis or to monitor organic pollutants in natural or industrial environments. Advances in the field of signal amplification using enzymatic reactions, nanomaterials such as carbon nanotubes, graphene and graphene derivatives, metallic nanoparticles (gold, silver, various oxides or metal complexes), or magnetic beads show how it is possible to improve collection, binding or transduction performances and reach the requirements for realistic clinical diagnostic or environmental control. This review presents these most recent advances; it focuses first on classical electrode substrates, then moves to carbon-based nanostructured ones including carbon nanotubes, graphene and other carbon materials, metal or metal-oxide nanoparticles, magnetic nanoparticles, dendrimers and, to finish, explore the use of ionic liquids. Analytical performances are systematically covered and compared, depending on the detection principle, but also from a chronological perspective, from 2012 to 2016 and early 2017.

Screen-printed electrode produced by printed-circuit board technology. Application to Cancer Biomarker Detection by means of plastic antibody as sensing material

This research work presents, for the first time, a screen-printed electrode (SPE) made on a PCB board with silver tracks (Ag) and a three electrode configuration (AgxO-working, AgxO-counter and Ag/AgxO-reference electrodes), following the same approach as printed-circuit boards (PCBs). This low cost and disposable device was tested for screening a cancer biomarker in point-of-care. The selected biomarker was carcinogenic embryonic antigen (CEA) protein, routinely used to follow-up the progression of specific cancer diseases. The biosensor was constructed by assembling a plastic antibody on the Ag-working electrode area, acting as the biorecognition element of the device. The protein molecules that were entrapped on the polymer and positioned at the outer surface of the polypyrrole (PPy) film were removed by protease action. The imprinting effect was tested by preparing non-imprinted (NPPy) material, including only PPy as biorecognition element. Infrared and Raman studies confirmed the surface modification of these electrodes. The ability of the sensing material to rebind CEA was measured by several electrochemical techniques: cyclic voltammetry (CV), impedance spectroscopy (EIS) and square wave voltammetry (SWV). The linear response ranged from 0.05 to 1.25 pg/mL against logarithm concentration. Overall, producing screen-printed electrodes by means of conventional PCB technology showed promising features, mostly regarding cost and prompt availability. The plastic antibody-based biosensor also seems to be a promising tool for screening CEA in point-of-care, with low response time, low cost, good sensitivity and high stability.

Hybrid 2D-nanomaterials-based electrochemical immunosensing strategies for clinical biomarkers determination

Owing to the outstanding conductivity and biocompatibility as well as numerous other fascinating properties of two-dimensional (2D)-nanomaterials, 2D-based nanohybrids have shown unparalleled superiorities in the field of electrochemical biosensors. This review highlights latest advances in electrochemical immunosensors for clinical biomarkers based on different hybrid 2D-nanomaterials. Particular attention will be given to hybrid nanostructures involving graphene and other graphene-like 2D-layered nanomaterials (GLNs). Several recent strategies for using such 2D-nanomaterial heterostructures in the development of modern immunosensors, both for tagging or modifying electrode transducers, are summarized and discussed. These hybrid nanocomposites, quite superior than their rival materials, will undoubtedly have an important impact within the near future and not only in clinical areas. Current challenges and future perspectives in this rapidly growing field are also outlined.

Electrochromic sensing platform based on steric hindrance effects for CEA detection

In this work, an electrochromic sensing platform with prussian blue (PB) as the indicator was proposed for signaling carcinoembryonic antigen (CEA) using the bipolar electrode (BPE) system.

Affinity biosensors for tumor-marker analysis

The use of cancer biomarkers is emerging as one of the most promising strategies for early detection and management of cancer. Biosensors can provide advanced platforms for biomarker analysis with the advantages of being easy to use, inexpensive, rapid and offering multi-analyte testing capability. The intention of this article is to discuss recent advances and trends in affinity biosensors for cancer diagnosis, prognosis and even theragnosis. The different types of affinity biosensors will be reviewed in terms of molecular recognition element. Current challenges and trends for this technology will be also discussed, with a particular emphasis on recent developments in miRNA detection.

Ultrasensitive immunoassay for CA125 detection using acid site compound as signal and enhancer

A novel sensitive electrochemical immunosensor was proposed for detection of CA125 based on ferrocenecarboxylic acid (FA), HCl-doped polyaniline (H-PANI) and chitosan hydrochloride (CS-HCl), which were used as substrate materials to generate signal and to enlarge specific surface area. The composite of these three materials (acid center compound, FA@H-PANI@CS-HCl) can be connected by hydrogen (H) in each molecule. Ag@Co3O4 nanosheets were used in the immunosensor to amplify the antibody capacity and to enhance the sensitivity of the immunoassay. This kind of sensor was novel, concise and it is the first time to be used in the detection of CA125. The biosensor exhibited low detection limit (0.25 pg/mL) and wide linear range (0.001-25 ng/mL). The stability, selectivity and reproducibility were acceptable. Serum sample analysis proved that the proposed sensor owned well precision and it might be used in potential clinic testing application in the future.

3D sandwich-type prostate specific antigen (PSA) immunosensor based on rGO–MWCNT–Pd nanocomposite

A signal amplifying sandwich-type immunosensor with a wide linear range and a low detection limit is developed with potential clinical and diagnostic applications.

Enhanced sensing performance of supported graphitic carbon nitride nanosheets and the fabrication of electrochemiluminescent biosensors for IgG

A greatly enhanced ECL signal was obtained after the incorporation of C₃N₄ nanosheets into the NPG matrix and a label-free ECL immunosensor was proposed.

Electrochemical aptasensor for mucin 1 based on dual signal amplification of poly(o-phenylenediamine) carrier and functionalized carbon nanotubes tracing tag

Mucin 1 (MUC 1), as a most studied mucin, has become a useful marker for identifying breast cancer in the early stages. In this work, a novel method for the determination of MUC 1 in serum was developed based on a sandwich-type electrochemical aptasensor, which combined a dual signal amplification strategy of poly(o-phenylenediamine)-Au nanoparticles (PoPD-AuNPs) hybrid film as carrier and AuNPs functionalized silica/multiwalled carbon nanotubes core-shell nanocomposites (AuNPs/SiO2@MWCNTs) as tracing tag. The PoPD-AuNPs film provides a suitable microenvironment for stabilizing the primary aptamer (Apt) assembly, and the AuNPs/SiO2@MWCNTs enhances the surface area for immobilizing abundant secondary Apts as well as load large amounts of electrochemical probe thionine (Thi). In the presence of MUC 1, the sandwich-type recognition reacted on the aptasensor surface, and the Thi-AuNPs/SiO2@MWCNTs nanoprobes were captured onto the electrode surface to form biocomplex. AuNPs and MWCNTs could facilitate the electron transfer from Thi to the electrode, thus amplifying the detection response. Under the optimized experimental conditions, the proposed sensing strategy provided a wider linear dynamic range over three orders of magnitude with the detection limit down to 1 pM. Moreover, the aptasensor demonstrated good precision, acceptable stability and reproducibility.

Ultrasensitive non-mediator electrochemical immunosensors using Au/Ag/Au core/double shell nanoparticles as enzyme-mimetic labels

Determination of squamous cell carcinoma antigen (SCCA) in human serum plays an important role in diagnosis of cervical squamous cell carcinoma. In this work, Au/Ag/Au core/double shell nanoparticles (Au/Ag/Au NPs) were prepared by a simple approach and were used as novel enzyme-mimetic labels for development of a sandwich-type electrochemical immunosensor for SCCA. The nanostructure of Au/Ag/Au NPs could be well confirmed by transmission electron microscope (TEM) and UV-vis spectra. Au NPs decorated mercapto-functionalized graphene sheets (Au@SH-GS) were used as platform for immobilization of primary antibody (Ab1), while Au/Ag/Au NPs were employed as labels of secondary antibody (Ab2). Due to the excellent electrocatalytic activity of Au/Ag/Au NPs towards the reduction of hydrogen peroxide (H2O2), electrochemical amperometric responses to SCCA were achieved after the immuno-reaction. Under optimum conditions, the electrochemical immunosensor exhibited a wide linear range from 0.5 pg/mL to 40 ng/mL with a low detection limit of 0.18 pg/mL for SCCA. The designed immunosensor displayed an excellent analytical performance with good reproducibility, high selectivity and stability.

A novel label-free amperometric immunosensor for carcinoembryonic antigen based on Ag nanoparticle decorated infinite coordination polymer fibres

In this article, for the first time, a novel, high-yield and template-free method for the synthesis of Ag nanoparticle decorated thionine/infinite coordination polymer (AgNP/THI/ICP) fibres is proposed. The thionine can be adsorbed to the AgNP/THI/ICP fibres by π-conjugation and act as the redox probe. The AgNP/THI/ICP fibres not only favor the immobilization of antibody but also facilitate the electron transfer. It is found that the AgNP/THI/ICP fibres can be designed to act as a sensitive label-free electrochemical immunosensor for carcinoembryonic antigen (CEA) determination. Under the optimized conditions, the linear range of the proposed immunosensor is estimated to be from 50 fg/mL to 100 ng/mL and the detection limit is estimated to be 0.5 fg/mL at a signal-to-noise ratio of 3, respectively. The prepared immunosensor for detection of CEA shows high sensitivity, reproducibility and stability. Our study demonstrates that the proposed immunosensor has also been used to determine CEA successfully in diluted blood samples.

A chitosan-Au-hyperbranched polyester nanoparticles-based antifouling immunosensor for sensitive detection of carcinoembryonic antigen

An electrochemical immunosensor was developed for the detection of carcinoembryonic antigen in whole blood, based on the antibiofouling properties of carboxylic acid group functionalized hyperbranched polyester nanoparticles.

Ultrasensitive multiplexed immunosensors for the simultaneous determination of endocrine disrupting compounds using Pt@SBA-15 as a non-enzymatic label

The simultaneous determination of different analytes based on multiplexed immunosensors is attractive and promising in bioassays and environmental analysis. In this paper, a novel ultrasensitive multiplexed immunoassay method was developed for the determination of endocrine disrupting compounds (EDCs) based on disposable screen-printed carbon electrodes. Different capture antibodies were separately immobilized on the carbon electrodes to form an immunosensor array. Platinum nanoparticle-functionalized mesoporous silica nanoparticles (Pt@SBA-15) was used as catalytic labels of secondary antibodies. Due to the catalytic activities of the platinum nanoparticles and the large surface area of SBA-15, a strong electrical response towards the analytical antigens was achieved. The multiplexed immunoassay array enables the simultaneous determination of different analytes. Using diethylstilbestrol and estradiol as model analytes, this multiplexed immunoassay method showed wide linear ranges with detection limits down to 0.28 and 1.2 pg mL^-1 for diethylstilbestrol and estradiol, respectively. The proposed sensing strategy enriches electrochemical immunoassays and has a promising application in bioassays and environmental analysis.

Macromolecular interactions of triterpenoids and targeted toxins: role of saponins charge

Macromolecular interaction of protein toxins with certain plant triterpenoids holds potential for application in tumor therapy. The ability of only certain saponins to enhance the endosomal escape of toxins specifically in tumor cells was evaluated and set into correlation with the electrophoretic mobility. Saponins from Saponaria officinalis Linn, were selected as a lead to understand this evolutionarily conserved principle in detail. Agarose gel electrophoresis was utilized to procure pure saponin fractions with different electrophoretic mobility, which were tested for their ability to enhance the toxicity by live cell monitoring. Five fractions (SOG1-SOG5) were isolated with a relative electrophoretic mobility of (-0.05, 0.41, 0.59, 0.75 and 1.00) and evaluated using thin layer chromatography, HPLC, and mass spectroscopic analysis. Cytotoxicity experiments revealed highest effectiveness with SOG3. Live cell imaging experiments with SOG3 revealed that this saponin with a specific REM of 0.59 could assist in the lyso/endosomal release of the toxic payload without affecting the integrity of plasma membrane and could lead to the induction of apoptosis. This charge dependent enhancement was also found to be highly specific to type I ribosome inactivating proteins compared to bacterial toxins. Charge interaction of plant toxins and saponins with tumor cells, plays a major role in toxin specific modulation of response. The finding opens up newer ways of finding protein saponin interaction conserved evolutionarily and to test their role in endosomal escape of therapeutic molecules.

A graphene-based electrochemical competitive immunosensor for the sensitive detection of okadaic acid in shellfish

A novel graphene-based voltammetric immunosensor for sensitive detection of okadaic acid (OA) was developed. A simple and efficient electrografting method was utilized to functionalize graphene-modified screen-printed carbon electrodes (GSPE) by the electrochemical reduction of in situ generated 4-carboxyphenyl diazonium salt in acidic aqueous solution. Next, the okadaic acid antibody was covalently immobilized on the carboxyphenyl modified graphene electrodes via carbodiimide chemistry. Square wave voltammetry (SWV) was used to investigate the stepwise assembly of the immunosensor. A competitive assay between OA and a fixed concentration of okadaic acid-ovalbumin conjugate (OA-OVA) for the immobilized antibodies was employed for the detection of okadaic acid. The decrease of the [Fe(CN)(6)](3-/4-) reduction peak current in the square wave voltammetry for various concentrations of okadaic acid was used for establishing the calibration curve. A linear relationship between the SWV peak current difference and OA concentration was obtained up to ~5000 ng L(-1). The developed immunosensor allowed a detection limit of 19 ng L(-1) of OA in PBS buffer. The matrix effect studied with spiked shellfish tissue extracts showed a good percentage of recovery and the method was also validated with certified reference mussel samples.

Sandwich-type immunosensors and immunoassays exploiting nanostructure labels: A review

Methods based on sandwich-type immunosensors and immunoassays have been developed for detection of multivalent antigens/analytes with more than one eptiope due to the use of two matched antibodies. High-affinity antibodies and appropriate labels are usually employed for the amplification of detectable signal. Recent research has looked to develop innovative and powerful novel nanoparticle labels, controlling and tailoring their properties in a very predictable manner to meet the requirements of specific applications. This articles reviews recent advances, exploiting nanoparticle labels, in the sandwich-type immunosensors and immunoassays. Routine approaches involve noble metal nanoparticles, carbon nanomaterials, semiconductor nanoparticles, metal oxide nanostructures, and hybrid nanostructures. The enormous signal enhancement associated with the use of nanoparticle labels and with the formation of nanoparticle-antibody-antigen assemblies provides the basis for sensitive detection of disease-related proteins or biomolecules. Techniques commonly rely on the use of biofunctionalized nanoparticles, inorganic-biological hybrid nanoparticles, and signal tag-doped nanoparticles. Rather than being exhaustive, this review focuses on selected examples to illustrate novel concepts and promising applications. Approaches described include the biofunctionalized nanoparticles, inorganic-biological hybrid nanoparticles, and signal tage-doped nanoparticles. Further, promising application in electrochemical, mass-sensitive, optical and multianalyte detection are discussed in detail.