Polypyrrole–poly(3,4-ethylenedioxythiophene)–Ag (PPy–PEDOT–Ag) nanocomposite films for label-free electrochemical DNA sensing

In silico modelling of ciprofloxacin specific aptamer for the development of high-performance biosensor

Ciprofloxacin (CFX), a widely used fluoroquinolone antibiotic, is critical in healthcare settings for treating patients. However, improper treatment of wastewater from these facilities can lead to environmental contamination with CFX. This underscores the need for an efficient, straightforward method for early detection. In this study, a DNA aptamer was selected through a hierarchical docking workflow, and the stability and interactions were assessed by Molecular Dynamics (MD) simulation. The aptamer-CFX complex that showed the most promise had a docking score of -8.596 kcal/mol and was further analyzed using MD simulation and MM/PBSA. Based on the overall results, the identified ssDNA sequence length of 60 nt (CAGCGCTAGGGCTTTTAGCGTAATGGGTAGGGTGGTGCGGTGCAGATATCGGAATTGGTG) was immobilized over a gold transducer surface through the self-assembled monolayer (SAM; Au-S-ssDNA) method. The ssDNA-modified surface has demonstrated a high affinity towards CFX, which is confirmed by cyclic voltammogram (CV) and electrochemical impedance spectroscopy measurements (EIS). The DNA-aptamer modified electrode demonstrated a good linear range (10 × 10-9 - 200 × 10-9 M), detection limit (1.0 × 10-9 M), selectivity, reproducibility, and stability. The optimized DNA-aptamer-based CFX sensor was further utilized for the accurate determination of CFX with good recoveries in real samples.

Advances in the Use of Conducting Polymers for Healthcare Monitoring

Conducting polymers (CPs) are an innovative class of materials recognized for their high flexibility and biocompatibility, making them an ideal choice for health monitoring applications that require flexibility. They are active in their design. Advances in fabrication technology allow the incorporation of CPs at various levels, by combining diverse CPs monomers with metal particles, 2D materials, carbon nanomaterials, and copolymers through the process of polymerization and mixing. This method produces materials with unique physicochemical properties and is highly customizable. In particular, the development of CPs with expanded surface area and high conductivity has significantly improved the performance of the sensors, providing high sensitivity and flexibility and expanding the range of available options. However, due to the morphological diversity of new materials and thus the variety of characteristics that can be synthesized by combining CPs and other types of functionalities, choosing the right combination for a sensor application is difficult but becomes important. This review focuses on classifying the role of CP and highlights recent advances in sensor design, especially in the field of healthcare monitoring. It also synthesizes the sensing mechanisms and evaluates the performance of CPs on electrochemical surfaces and in the sensor design. Furthermore, the applications that can be revolutionized by CPs will be discussed in detail.

Fabrication and Characterization of Acute Myocardial Infarction Myoglobin Biomarker Based on Chromium-Doped Zinc Oxide Nanoparticles

In this article, we describe the fabrication and characterization of a sensor for acute myocardial infarction that detects myoglobin biomarkers using chromium (Cr)-doped zinc oxide (ZnO) nanoparticles (NPs). Pure and Cr-doped ZnO NPs (13 × 10¹⁷, 20 × 10¹⁷, and 32 × 10¹⁷ atoms/cm³ in the solid phase) were synthesized by a facile low-temperature sol-gel method. Synthesized NPs were examined for structure and morphological analysis using various techniques to confirm the successful formation of ZnO NPs. Zeta potential was measured in LB media at a negative value and increased with doping. XPS spectra confirmed the presence of oxygen deficiency in the synthesized material. To fabricate the sensor, synthesized NPs were screen-printed over a pre-fabricated gold-coated working electrode for electrochemical detection of myoglobin (Mb). Cr-doped ZnO NPs doped with 13 × 10¹⁷ Cr atomic/cm³ revealed the highest sensitivity of ~37.97 μA.cm⁻²nM⁻¹ and limit of detection (LOD) of 0.15 nM for Mb with a response time of ≤10 ms. The interference study was carried out with cytochrome c (Cyt-c) due to its resemblance with Mb and human serum albumin (HSA) abundance in the blood and displayed distinct oxidation potential and current values for Mb. Cr-doped ZnO NP-based Mb biosensors showed 3 times higher sensitivity as compared to pure ZnO NP-based sensors.

Electrochemical immunosensor based on hollow porous Pt skin AgPt alloy/NGR as a dual signal amplification strategy for sensitive detection of Neuron-specific enolase

Neuron-specific enolase (NSE) is a specific marker for small cell carcinoma (SCLC). Sandwich-type electrochemical immunosensors are powerful for biomarker analysis, and the electrocatalytic activity of the signal amplification platform and the performance of the substrate are critical to their sensitivity. In this work, N atom-doped graphene functionalized with hollow porous Pt-skin Ag-Pt alloy (HP-Ag/Pt/NGR) was designed as a dual signal amplifier. The hollow porous Pt skin structure improves the atomic utilization and the larger internal cavity spacing significantly increases the number of electroactive centers, thus exhibiting more extraordinary electrocatalytic activity and durability for H₂O₂ reduction. Using NGR with good catalytic activity as the support material of HP-Ag/Pt, the double amplification of the current signal is realized. For the substrate, polypyrrole-poly(3,4-ethylenedioxythiophene) (PPy-PEDOT) nanotubes were synthesized by a novel chemical polymerization route, which effectively increased the interfacial electron transfer rate. By coupling Au nanoparticles (Au NPs) with PPy-PEDOT, the immune activity of biomolecules is maintained and the conductivity is further enhanced. Under optimal conditions, the linear range was 50 fg mL^-1 - 100 ng mL^-1, and the limit of detection (LOD) was 18.5 fg mL^-1. The results confirm that the developed immunosensor has great promise for the early clinical diagnosis of SCLC.

Polypyrrole-palladium nanocomposite as a high-efficiency transducer for thrombin detection with liposomes as a label

Sensitive and selective determination of protein biomarkers with high accuracy often remains a great challenge due to their existence in the human body at an exceptionally low concentration level. Therefore, sensing mechanisms that are easy to use, simple, and capable of accurate quantification of analyte are still in development to detect biomarkers at a low concentration level. To meet this end, we demonstrated a methodology to detect thrombin in serum at low concentration levels using polypyrrole (PPy)-palladium (Pd)nanoparticle-based hybrid transducers using liposomes encapsulated redox marker as a label. The morphology of Ppy-Pd composites was characterized by scanning electron microscopy, and the hybrid structure provided excellent binding and detection platform for thrombin detection in both buffer and serum solutions. For quantitative measurement of thrombin in PBS and serum, the change in current was monitored using differential pulse voltammetry, and the calculated limit of quantification (LOQ) and limit of detection (LOD) for the linear segment (0.1-1000 nM of thrombin) were 1.1 pM and 0.3 pM, in serum, respectively. The sensors also exhibited good stability and excellent selectivity towards the detection of thrombin, and thus make it a strong candidate for adopting its sensing applications in biomarker detection technologies.

Development strategies of conducting polymer-based electrochemical biosensors for virus biomarkers: Potential for rapid COVID-19 detection

Rapid, accurate, portable, and large-scale diagnostic technologies for the detection of severe acute respiratory syndrome-coronavirus-2 (SARS-CoV-2) are crucial for controlling the coronavirus disease (COVID-19). The current standard technologies, i.e., reverse-transcription polymerase chain reaction, serological assays, and computed tomography (CT) exhibit practical limitations and challenges in case of massive and rapid testing. Biosensors, particularly electrochemical conducting polymer (CP)-based biosensors, are considered as potential alternatives owing to their large advantages such as high selectivity and sensitivity, rapid detection, low cost, simplicity, flexibility, long self-life, and ease of use. Therefore, CP-based biosensors can serve as multisensors, mobile biosensors, and wearable biosensors, facilitating the development of point-of-care (POC) systems and home-use biosensors for COVID-19 detection. However, the application of these biosensors for COVID-19 entails several challenges related to their degradation, low crystallinity, charge transport properties, and weak interaction with biomarkers. To overcome these problems, this study provides scientific evidence for the potential applications of CP-based electrochemical biosensors in COVID-19 detection based on their applications for the detection of various biomarkers such as DNA/RNA, proteins, whole viruses, and antigens. We then propose promising strategies for the development of CP-based electrochemical biosensors for COVID-19 detection.

Stimuli-responsive polymer-based systems for diagnostic applications

Stimuli-responsive polymers exhibit properties that make them ideal candidates for biosensing and molecular diagnostics. Through rational design of polymer composition combined with new polymer functionalization and synthetic strategies, polymers with myriad responsivities, e.g., responses to temperature, pH, biomolecules, CO2, light, and electricity can be achieved. When these polymers are specifically designed to respond to biomarkers, stimuli-responsive devices/probes, capable of recognizing and transducing analyte signals, can be used to diagnose and treat disease. In this review, we highlight recent state-of-the-art examples of stimuli-responsive polymer-based systems for biosensing and bioimaging.

Ultrasensitive and selective molecularly imprinted electrochemical oxaliplatin sensor based on a novel nitrogen-doped carbon nanotubes/Ag@cu MOF as a signal enhancer and reporter nanohybrid

A sensitive and selective molecular imprinted polymeric network (MIP) electrochemical sensor is proposed for the determination of anti-cancer drug oxaliplatin (OXAL). The polymeric network [poly(pyrrole)] was electrodeposited on a glassy carbon electrode (GCE) modified with silver nanoparticles (Ag) functionalized Cu-metal organic framework (Cu-BDC) and nitrogen-doped carbon nanotubes (N-CNTs). The MIP-Ag@Cu-BDC /N-CNTs/GCE showed an observable reduction peak at -0.14 V, which corresponds to the Cu-BDC reduction. This peak increased and decreased by eluting and rebinding of OXAL, respectively. The binding constant between OXAL and Cu-BDC was calculated to be 3.5 ± 0.1 × 10⁷ mol^-1 L. The electrochemical signal (∆i) increased with increasing OXAL concentration in the range 0.056-200 ng mL^-1 with a limit of detection (LOD, S/N = 3) of 0.016 ng mL^-1. The combination of N-CNTs and Ag@Cu-BDC improves both the conductivity and the anchoring sites for binding the polymer film on the surface of the electrode. The MIP-based electrochemical sensor offered outstanding sensitivity, selectivity, reproducibility, and stability. The MIP-Ag@Cu-BDC /N-CNTs/GCE was applied to determine OXAL in pharmaceutical injections, human plasma, and urine samples with good recoveries (97.5-105%) and acceptable relative standard deviations (RSDs = 1.8-3.2%). Factors affecting fabrication of MIP and OXAL determination were optimized using standard orthogonal design using L₂₅ (5⁶) matrix. This MIP based electrochemical sensor opens a new venue for the fabrication of other similar  sensors and biosensors.

Silver nanoparticles conjugated MnFe-based Prussian blue analogue for voltammetric and impedimetric bioaptasensing of amifostine (ethyol)

A novel bioaptasensing-based electrochemical method for determination of amifostine (AMF) is proposed. The electrochemical aptasensor is based on modification of a glassy carbon electrode with a nanocomposite consisting of silver nanoparticles @ MnFe Prussian blue analogue nanospheres (AgNPs@MnFePBA NS), followed by immobilization of aptamer via Ag-N bonds (aptamer/AgNPs@MnFePBA NS/GCE). Experimental parameters including pH, incubation time, and aptamer concentrations were optimized. Electrochemical impedance spectroscopy (EIS) and differential pulse voltammetric (DPV) techniques were utilized to quantify AMF. The anodic peak current (∆Ipa) and charge transfer resistance (∆Rct) differences increase in the presence of AMF. Under the optimal conditions, using the redox probe, the electrochemical aptasensor exhibited linear ranges of 0.34-45 nmol L^-1 and 0.69-45 nmol L^-1 with LODs of 0.11 nmol L^-1 and 0.23 nmol L^-1 for EIS and DPV, respectively. The aptasensor was used to determine AMF in human plasma and in the presence of interfering species with recoveries and RSDs in the range 97.8-103.2% and 2.2-4.2%, respectively. Graphical abstract.

Electrochemical Biosensors Based on Conducting Polymers: A Review

Conducting polymers are an important class of functional materials that has been widely applied to fabricate electrochemical biosensors, because of their interesting and tunable chemical, electrical, and structural properties. Conducting polymers can also be designed through chemical grafting of functional groups, nanostructured, or associated with other functional materials such as nanoparticles to provide tremendous improvements in sensitivity, selectivity, stability and reproducibility of the biosensor’s response to a variety of bioanalytes. Such biosensors are expected to play a growing and significant role in delivering the diagnostic information and therapy monitoring since they have advantages including their low cost and low detection limit. Therefore, this article starts with the description of electroanalytical methods (potentiometry, amperometry, conductometry, voltammetry, impedometry) used in electrochemical biosensors, and continues with a review of the recent advances in the application of conducting polymers in the recognition of bioanalytes leading to the development of enzyme based biosensors, immunosensors, DNA biosensors, and whole-cell biosensors.

Glassy carbon electrodes modified with reduced graphene oxide-MoS2-poly (3, 4-ethylene dioxythiophene) nanocomposites for the non-enzymatic detection of nitrite in water and milk

The detrimental effect of (NO₂^-) on environment, a sensitive and selective detection of nitrite (NO₂^-) ions with point-to-care device is need to be fabricated. Herein, we report the non-enzymatic nitrite sensor using a novel reduced graphene oxide/molybdenum disulfide/poly (3, 4-ethylene dioxythiophene) (rGO/MoS₂/PEDOT) nanocomposite electrode. The rGO/MoS₂/PEDOT nanocomposite was synthesized using facile and cost-effective hydrothermal and polymerization approaches. The characteristics of rGO-MoS₂-PEDOT nanocomposite was investigated by X-ray diffraction (XRD), Fourier transform infrared (FT-IR), Raman, transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS) and Brunauer-Emmett-Teller (BET) analyses. The rGO-MoS₂-PEDOT nanocomposite modified glassy carbon electrode (GCE) was directly used for electrocatalytic detection of nitrite ions present in the solution. TEM images show the PEDOT nanoparticles with an average size of 100-120 nm are uniformly covered on the outer face of rGO-MoS₂ nanosheets. The interaction between the PEDOT and rGO-MoS₂ is evidenced in the FTIR, XRD and XPS studies, and they produced synergistic effect, resulting enhanced electrocatalytic performance activity towards oxidation of nitrite. Under optimized conditions, the fabricated electrode exhibited remarkably good sensitivity (874.19 μA μM^-1 cm^-2), low detection limit (LOD) (0.059 μM, S/N = 3), wide linear range (0.001-1 mM) of nitrite with desirable selectivity, long-term stability and reproducibility. Furthermore, the practical feasibility of the fabricated sensor is validated by the successful detection of nitrite ion in some water and milk samples with excellent correlation. Thus, feasible easier synthesis method was adopted first time to fabricate rGO-MoS₂-PEDOT nanocomposite nitrite sensor in the milk and water samples with enhanced selectivity, sensitivity and LOD.

Nanomaterial-doped conducting polymers for electrochemical sensors and biosensors

This review summarizes recent advances in the development of electrochemical sensors and biosensors based on nanomaterial doped conducting polymers.

Boron doped graphene wrapped silver nanowires as an efficient electrocatalyst for molecular oxygen reduction

Metal nanowires exhibit unusually high catalytic activity towards oxygen reduction reaction (ORR) due to their inherent electronic structures. However, controllable synthesis of stable nanowires still remains as a daunting challenge. Herein, we report the in situ synthesis of silver nanowires (AgNWs) over boron doped graphene sheets (BG) and demonstrated its efficient electrocatalytic activity towards ORR for the first time. The electrocatalytic ORR efficacy of BG-AgNW is studied using various voltammetric techniques. The BG wrapped AgNWs shows excellent ORR activity, with very high onset potential and current density and it followed four electron transfer mechanism with high methanol tolerance and stability towards ORR. The results are comparable to the commercially available 20% Pt/C in terms of performance.

Silver nanoparticles anchored on nitrogen-doped graphene as a novel electrochemical biosensing platform with enhanced sensitivity for aptamer-based pesticide assay

Silver nanoparticles (NPs) decorated nitrogen doped graphene (NG) nanocomposites were prepared through a one-step thermal-treatment route using arginine as the nitrogen source. By integrating the excellent electrical properties and large surface area of Ag NPs and NG, the obtained Ag/NG nanocomposites show more effective electron transfer and high loading capacity than Ag-graphene and pure NG. In the presence of a target, the stronger interaction between the aptamer and the target promotes the formation of a target-aptamer complex on the electrode surface which blocks the electron transfer. Based on this sensing mechanism, a novel and highly sensitive biosensing platform by the use of Ag/NG as enhancing materials is demonstrated for detection of the model target, acetamiprid. The presented aptasensor exhibited a wide linear response for acetamiprid in the range of 1 × 10(-13) M to 5 × 10(-9) M with a low detection limit of 3.3 × 10(-14) M (S/N = 3). Moreover, this electrochemical aptasensor avoided complicated labeling procedures and showed magnificent sensitivity, high selectivity and low cost, which made it not only convenient but also time-saving and applicable. Furthermore, the proposed design may offer a promising way to develop a new electrochemical aptasensor for sensitive and specific detection of a wide spectrum of analytes in food, medical and environmental fields.

An electrochemical bifunctional sensor for the detection of nitrite and hydrogen peroxide based on layer-by-layer multilayer films of cationic phthalocyanine cobalt(ii) and carbon nanotubes

Binder-free multilayer films composed of phthalocyanine and carbon nanotubes were constructed by the layer-by-layer electrostatic assembly and applied for the electrochemical detection of NO₂⁻ and H₂O₂.

Petal-like graphene–Ag composites with highly exposed active edge sites were designed and constructed for electrochemical determination of metronidazole

The petal-like graphene–Ag composites with highly exposed active edge sites were constructed, which served as both the electrocatalyst and the current amplifier for electrochemical detection of metronidazole.

Gold nanoparticle decorated graphene sheet-polypyrrole based nanocomposite: its synthesis, characterization and genosensing application

We report herein the synthesis of gold nanoparticle (GNP) decorated-graphene sheets (GO-GNPs) using the template of graphene oxide (GO) by a one-pot solution-based method. A polypyrrole-GO decorated GNP nanocomposite (GO-GNP/PPY) has been electropolymerized using a potentiodynamic method on an indium tin oxide (ITO) coated glass substrate. The as-synthesized nanocomposites are characterized by transmission electron microscopy, energy dispersive X-ray spectroscopy, scanning electron microscopy, thermogravimetric analysis, Fourier transform infrared and Raman spectroscopy. It has been found that GNPs of ca. 13 nm are uniformly dispersed on the surface of GO, and have a high electrochemically active surface area. The surface morphology studies show that PPY structure changes from nanoflowers to nanostars and then to nanosheets with an increase in the scan rate (20-200 mV s(-1)). The prepared GO-GNP/PPY/ITO electrode was further used as a genosensor, where the electrochemical response was measured using methylene blue (MB) as a redox indicator. The genosensor shows a response time of 60 s with high sensitivity (1 × 10(-15) M) and linearity (1 × 10(-15)-1 × 10(-6) M) with the correlation coefficient of 0.9975.

[Cu(phen)2](2+) acts as electrochemical indicator and anchor to immobilize probe DNA in electrochemical DNA biosensor

We demonstrate a novel protocol for sensitive in situ label-free electrochemical detection of DNA hybridization based on copper complex ([Cu(phen)2](2+), where phen = 1,10-phenanthroline) and graphene (GR) modified glassy carbon electrode. Here, [Cu(phen)2](2+) acted advantageously as both the electrochemical indicator and the anchor for probe DNA immobilization via intercalative interactions between the partial double helix structure of probe DNA and the vertical aromatic groups of phen. GR provided large density of docking site for probe DNA immobilization and increased the electrical conductivity ability of the electrode. The modification procedure was monitored by electrochemical impedance spectroscopy (EIS). Square-wave voltammetry (SWV) was used to explore the hybridization events. Under the optimal conditions, the designed electrochemical DNA biosensor could effectively distinguish different mismatch degrees of complementary DNA from one-base mismatch to noncomplementary, indicating that the biosensor had high selectivity. It also exhibited a reasonable linear relationship. The oxidation peak currents of [Cu(phen)2](2+) were linear with the logarithm of the concentrations of complementary target DNA ranging from 1 × 10(-12) to 1 × 10(-6) M with a detection limit of 1.99 × 10(-13) M (signal/noise = 3). Moreover, the stability of the electrochemical DNA biosensor was also studied.

Nitrite Oxidation with Copper-Cobalt Nanoparticles on Carbon Nanotubes Doped Conducting Polymer PEDOT Composite

Copper-cobalt bimetal nanoparticles (Cu-Co) have been electrochemically prepared on glassy carbon electrodes (GCEs), which were electrodeposited with conducting polymer nanocomposites of poly(3,4-ethylenedioxythiophene) (PEDOT) doped with carbon nanotubes (CNTs). Owing to their good conductivity, high mechanical strength, and large surface area, the PEDOT/CNTs composites offered excellent substrates for the electrochemical deposition of Cu-Co nanoparticles. As a result of their nanostructure and the synergic effect between Cu and Co, the Cu-Co/PEDOT/CNTs composites exhibited significantly enhanced catalytic activity towards the electrochemical oxidation of nitrite. Under optimized conditions, the nanocomposite-modified electrodes had a fast response time within 2 s and a linear range from 0.5 to 430 μm for the detection of nitrite, with a detection limit of 60 nm. Moreover, the Cu-Co/PEDOT/CNTs composites were highly stable, and the prepared nitrite sensors could retain more than 96 % of their initial response after 30 days.

Electrochemical DNA hybridization sensors based on conducting polymers

Conducting polymers (CPs) are a group of polymeric materials that have attracted considerable attention because of their unique electronic, chemical, and biochemical properties. This is reflected in their use in a wide range of potential applications, including light-emitting diodes, anti-static coating, electrochromic materials, solar cells, chemical sensors, biosensors, and drug-release systems. Electrochemical DNA sensors based on CPs can be used in numerous areas related to human health. This review summarizes the recent progress made in the development and use of CP-based electrochemical DNA hybridization sensors. We discuss the distinct properties of CPs with respect to their use in the immobilization of probe DNA on electrode surfaces, and we describe the immobilization techniques used for developing DNA hybridization sensors together with the various transduction methods employed. In the concluding part of this review, we present some of the challenges faced in the use of CP-based DNA hybridization sensors, as well as a future perspective.

An electrochemical biosensor for sensitive detection of microRNA-155: combining target recycling with cascade catalysis for signal amplification

In this work, a new electrochemical biosensor based on catalyzed hairpin assembly target recycling and cascade electrocatalysis (cytochrome c (Cyt c) and alcohol oxidase (AOx)) for signal amplification was constructed for highly sensitive detection of microRNA (miRNA). It is worth pointing out that target recycling was achieved only based on strand displacement process without the help of nuclease. Moreover, porous TiO2 nanosphere was synthesized, which could offer more surface area for Pt nanoparticles (PtNPs) enwrapping and enhance the amount of immobilized DNA strand 1 (S1) and Cyt c accordingly. With the mimicking sandwich-type reaction, the cascade catalysis amplification strategy was carried out by AOx catalyzing ethanol to acetaldehyde with the concomitant formation of high concentration of H2O2, which was further electrocatalyzed by PtNPs and Cyt c. This newly designed biosensor provided a sensitive detection of miRNA-155 from 0.8 fM to 1 nM with a relatively low detection limit of 0.35 fM.

One-pot synthesis of a polyaniline–gold nanocomposite and its enhanced electrochemical properties for biosensing applications

One pot synthesis of polyaniline–gold nanocomposite using chemical route in the presence of dodecyl benzene sulfonic acid.

Binary doped polypyrrole and polypyrrole/boron nitride nanocomposites: preparation, characterization and application in detection of liquefied petroleum gas leaks

We report an electrical conductivity based rapid response liquefied petroleum gas (LPG) sensor using binary doped polypyrrole and polypyrrole/boron nitride (PPy/BN) nanocomposites as the conductive material.