Highly selective and sensitive adenosine aptasensor based on platinum nanoparticles as catalytical label for amplified detection of biorecognition events through H2O2 reduction

A novel electrochemical aptasensor based on AgPdNPs/PEI-GO and hollow nanobox-like Pt@Ni-CoHNBs for procymidone detection

Herein, an aptasensor based on a signal amplification strategy was developed for the sensitive detection of procymidone (PCM). AgPd nanoparticles/Polenimine Graphite oxide (AgPdNPs/PEI-GO) was weaned as electrode modification material to facilitate electron transport and increase the active sites on the electrode surface. Besides, Pt@Ni-Co nanoboxes (Pt@Ni-CoHNBs) were utilized to be carriers for signaling tags, after hollowing ZIF-67 and growing Pt, the resulting Pt@Ni-CoHNBs has a tremendous amounts of folds occurred on the surface, enables it to carry a larger quantity of thionine, thus amplify the detectable electrochemical signal. In the presence of PCM, the binding of PCM to the signal probe would trigger a change in electrical signal. The aptasensor was demonstrated with excellent sensitivity and a low detection limit of 0.98 pg·mL-1, along with a wide linear range of 1 μg·mL-1 to 1 pg·mL-1. Meanwhile, the specificity, stability and reproducibility of the constructed aptasensor were proved to be satisfactory.

An electrochemical aptasensor based on multi-walled carbon nanotubes loaded with PtCu nanoparticles as signal label for ultrasensitive detection of adenosine

Adenosine, as an endogenous nucleoside modulator, plays an important role in heart rate regulation, neurotransmission, and control of the respiratory system and thus it is significantly important to realize its sensitive detection. Herein, a highly sensitive electrochemical aptasensor for adenosine detection was proposed by using multi-walled carbon nanotubes (MWCNTs) as support matrix loading PtCu nanoparticles (PtCu-MWCNTs) to amplify signal. On one hand, disposable screen-printing gold electrodes (SPGEs) were used as superb sensing base to ensure the stable connection of aptamers 1 (ssDNA1). On the other hand, the PtCu-MWCNTs complex was synthesized through a one-pot method, which not only can precisely control the proportion of metal mass in the product but also exhibited superior electrocatalytic activity towards H₂O₂. The recognition reactions were achieved by stepwise incubation of ssDNA1, ssDNA2-PtCu-MWCNTs (denoted as ssDNA2-label), and adenosine on the SPGEs. As a result, the constructed electrochemical aptasensor exhibited a wide linear range from 10 nM to 1.0 μM with a low detection limit of 1.0 nM (S/N = 3) for adenosine detection. The aptasensor also successfully realized the adenosine detection in human serum samples, which means that the proposed aptasensor holds a potential application in point-of-care detection.

Electrochemical monitoring of hydrogen peroxide by a signal-amplified microfluidic chip coupled with colloidal VO2 nanostructures as a peroxidase enzyme mimic

We present a novel electrochemical microfluidic device for the sensitive and selective detection of hydrogen peroxide (H₂O₂) through a VO₂ nanostructure enzyme mimic. The low-cost ($0.50) microfluidic chip was fabricated using a simple and rapid prototyping technique via three syringe needles. Each needle played the role of an electrode (working, reference, and counter), and was connected by micro-hoses to a construction of the electrochemical microfluidic chip. The colloidal VO₂ nanoflakes with peroxidase-like activity could be easily transferred on to the electrodes by a syringe, for development of a novel electrochemical platform to enable the detection of H₂O₂. The unique microfluidic electrochemical sensor delivered a wide linear dynamic range from 0.5 to 300 μM, with a limit of detection of 0.14 μM. The facile, rapid, sensitive, and selective as-fabricated H₂O₂ sensors were proven to be appropriate for the real-time monitoring of H₂O₂ released from PC12 cells. The integration of a microfluidic sensor with an enzyme mimic nanostructure is essentially a promising strategy for the low-cost and accurate monitoring of physiological processes.

Platinum nanoparticles (PtNPs)-based CRISPR/Cas12a platform for detection of nucleic acid and protein in clinical samples

Early rapid screening diagnostic assay is essential for the identification, prevention, and evaluation of many contagious or refractory diseases. The optical density transducer created by platinum nanoparticles (PtNPs) (OD-CRISPR) is reported in the present research as a cheap and easy-to-execute CRISPR/Cas12a-based diagnostic platform. The OD-CRISPR uses PtNPs, with ultra-high peroxidase-mimicking activity, to increase the detection sensitivity, thereby enabling the reduction of detection time and cost. The OD-CRISPR can be utilized to identify nucleic acid or protein biomarkers within an incubation time of 30-40min in clinical specimens. In the case of taking severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) N gene as an instance, when compared to a quantitative reverse transcription-polymerase chain reaction (RT-qPCR), the OD-CRISPR test attains a sensitivity of 79.17% and a specificity of 100%. In terms of detecting prostate-specific antigen (PSA), aptamer-based OD-CRISPR assay achieves the least discoverable concentration of 0.01 ng mL^-1. In general, the OD-CRISPR can detect nucleic acid and protein biomarkers, and is a potential strategy for early rapid screening diagnostic tools.

Platinum Nanoparticle Size and Density Impacts Purine Electrochemistry with Fast-Scan Cyclic Voltammetry

We demonstrate the density and shape of platinum nanoparticles (PtNP) on carbon-fiber microelectrodes with fast-scan cyclic voltammetry (FSCV) directly impacts detection of adenosine. Previously, we showed that metal nanoparticle-modified carbon significantly improves adenine-based purine detection; however, how the size and shape of the particles impact electrochemical detection was not investigated. Electrochemical investigations of how the surface topology and morphology impacts detection is necessary for designing ultrasensitive electrodes and for expanding fundamental knowledge of electrode-analyte interactions. To change the density and shape of the PtNP's on the surface, we varied the concentration of K₂PtCl₆ and electrodeposition time. We show that increasing the concentration of K₂PtCl₆ increases the density of PtNP's while increasing the electrodeposition time impacts both the density and size. These changes manipulate the adsorption behavior which impacts sensitivity. Based on these results, an optimal electrodeposition procedure was determined to be 1.0 mg/mL of K₂PtCl₆ deposited for 45 s and this results in an average increase in adenosine detection by 3.5 ±0.3-fold. Interestingly, increasing the size and density of PtNPs negatively impacts dopamine detection. Overall, this work provides fundamental insights into the differences between adenosine and dopamine interaction at electrode surfaces.

Advanced nanoengineered-customized point-of-care tools for prostate-specific antigen

Change in the level of human prostate-specific antigen (PSA) is a major element in the development and progression of prostate cancer (PCa). Most of the methodologies are currently restricted to their application in routine clinical screening due to the scarcity of adequate screening tools, false reading, long assay time, and cost. Innovative techniques and the integration of knowledge from a variety of domains, such as materials science and engineering, are needed to provide sustainable solutions. The convergence of precision point-of-care (POC) diagnostic techniques, which allow patients to respond in real time to changes in PSA levels, provides promising possibilities for quantitative and quantitative detection of PSA. This solution could be interesting and relevant for use in PCa diagnosis at the POC. The approaches enable low-cost real-time detection and are simple to integrate into user-friendly sensor devices. This review focuses on the investigations, prospects, and challenges associated with integrating engineering sciences with cancer biology to develop nanotechnology-based tools for PCa diagnosis. This article intends to encourage the development of new nanomaterials to construct high-performance POC devices for PCa detection. Finally, the review concludes with closing remarks and a perspective forecast.

Multienzymes activity of metals and metal oxide nanomaterials: applications from biotechnology to medicine and environmental engineering

With the rapid advancement and progress of nanotechnology, nanomaterials with enzyme-like catalytic activity have fascinated the remarkable attention of researchers, due to their low cost, high operational stability, adjustable catalytic activity, and ease of recycling and reuse. Nanozymes can catalyze the same reactions as performed by enzymes in nature. In contrast the intrinsic shortcomings of natural enzymes such as high manufacturing cost, low operational stability, production complexity, harsh catalytic conditions and difficulties of recycling, did not limit their wide applications. The broad interest in enzymatic nanomaterial relies on their outstanding properties such as stability, high activity, and rigidity to harsh environments, long-term storage and easy preparation, which make them a convenient substitute instead of the native enzyme. These abilities make the nanozymes suitable for multiple applications in sensing and imaging, tissue engineering, environmental protection, satisfactory tumor diagnostic and therapeutic, because of distinguished properties compared with other artificial enzymes such as high biocompatibility, low toxicity, size dependent catalytic activities, large surface area for further bioconjugation or modification and also smart response to external stimuli. This review summarizes and highlights latest progress in applications of metal and metal oxide nanomaterials with enzyme/multienzyme mimicking activities. We cover the applications of sensing, cancer therapy, water treatment and anti-bacterial efficacy. We also put forward the current challenges and prospects in this research area, hoping to extension of this emerging field. In addition to therapeutic potential of nanozymes for disease prevention, their practical effects in diagnostics, to monitor the presence of SARS-CoV-2 and related biomarkers for future pandemics will be predicted.

Ultrasensitive Materials for Electrochemical Biosensor Labels

Since the fabrication of the first electrochemical biosensor by Leland C. Clark in 1956, various labeled and label-free sensors have been reported for the detection of biomolecules. Labels such as nanoparticles, enzymes, Quantum dots, redox-active molecules, low dimensional carbon materials, etc. have been employed for the detection of biomolecules. Because of the absence of cross-reaction and highly selective detection, labeled biosensors are advantageous and preferred over label-free biosensors. The biosensors with labels depend mainly on optical, magnetic, electrical, and mechanical principles. Labels combined with electrochemical techniques resulted in the selective and sensitive determination of biomolecules. The present review focuses on categorizing the advancement and advantages of different labeling methods applied simultaneously with the electrochemical techniques in the past few decades.

Direct chemical vapor deposition of graphene on plasma-etched quartz glass combined with Pt nanoparticles as an independent transparent electrode for non-enzymatic sensing of hydrogen peroxide

In this work, chemical vapor deposition (CVD) method-grown graphene on plasma-etched quartz glass supported platinum nanoparticles (PtNPs/eQG) was constructed as an independent transparent electrode for non-enzymatic hydrogen peroxide (H2O2) detection. Graphene grown on quartz glass by the CVD method can effectively reduce the wrinkles and pollution caused by traditional transfer methods. The addition of the CF4 plasma-etched process accelerates the growth rate of graphene on quartz glass. The platinum nanoparticles (PtNPs) prepared by in situ sputtering have favorable dispersibility and maximize exposed active catalytic sites on graphene, providing performance advantages in the application of H2O2 detection. The resulting sensor's detection limit (3.3 nM, S/N = 3), detection linear range (10 nM to 80 μM) and response time (less than 2 s) were significantly superior to other graphene supported PtNPs materials in sensing of H2O2. In addition, the material preparation method was related to the non-transfer CVD method and in situ sputtering technology, allowing for the creation of independent electrodes without additional electrode modification processes. This primitive material preparation and electrode assembly process were promoted for the application and development of practical H2O2 sensors.

Architecting of a biodevice based on a screen-printed carbon electrode modified with the NiONP nanolayer and aptamer in BCM-7 detection

In this study, an ultrasensitive and robust biodevice implemented on a screen-printed carbon electrode (SPCE) surface is introduced. The β-casomorphin-7 (BCM-7) peptide as an early warning sign of autism disorder is distinguished in this system. The SPCE surface was directly electrodeposited with a nanolayer of the nickel oxide nanoparticles (NiONP). In next step, an Apt sequence as a capture of the BCM-7 was strongly attached on this surface. The embedded sensing interface offered some admirable characterizes to detect the BCM-7. The obtained DPV signals were reversely proportional to the concentrations of the BCM-7 through a stable binding reaction in two working linear ranges from 0.5 × 10^-9-1.5 μmol l-. Also, an unrivaled limit of detection (LOD) value of 166.6 aM was achieved that is so superior by other reported methods in the BCM-7 sensing. This hand-held biodevice was satisfactorily tested for the BCM-7 detection in human urine and blood sample with an average recovery rate of ∼101.87 %. More importantly, this strategy is free from labeling steps, complex sample processing and interference from common biomolecules in blood or urine. Due to the inherent advantages of the SPCE and the NiONP, utilizing this facile sensing interface may be an ideal choice in constructing of the ultrasensitive biodevice with low cost for distinguishing of the autism disorder.

Detection of pathogenic bacteria via nanomaterials-modified aptasensors

Detection and identification of special cells via aptamer-based nano-conjugates sensors have been revolutionized over the past few years. These sensing platforms rely on selecting aptamers using systematic evolution of ligands by exponential enrichment (SELEX) in vitro, which allows for sensitive detection of cells. Integration of the aptamer-based sensors (aptasensors) with nanomaterials offers enhanced specificity and sensitivity, which in turn, offers great promise for numerous applications, spanning from bioanalysis to biomedical applications. Accordingly, the demand for using aptamer-conjugated nanomaterials for various applications has progressively increased over the past years. In light of this, this Review seeks to highlight the recent advances in the development of aptamer-conjugated nanomaterials and their utilization for the detection of various pathogens involved in infectious diseases and food contamination.

Electrochemical sandwich-type thrombin aptasensor based on dual signal amplification strategy of silver nanowires and hollow Au-CeO2

Signal amplification is crucial in electrochemical biosensor to obtain low detection limits. In this work, a highly sensitive sandwich-type thrombin aptasensor is constructed, based on dual signal amplification of uniform silver nanowires (AgNWs) and hollow Au-CeO₂ nanocomposites. AgNWs are decorated on the ITO surface to immobilize amino functionalized thrombin capture apemeter 1 (Apt1). And Au nanoparticles (AuNPs) grown directly on the surface of hollow CeO₂ microstructure are used to immobilize sulfydryl functionalized thrombin reporter apemeter 2 (Apt2). Thus, sandwich-type apatasensor has been successfully designed, due to the specific recognition between thrombin and the two kinds of aptamers. One of the signal amplifications is from the good conductivity of uniform AgNWs. Moreover, uniform AgNWs together with hollow Au-CeO₂ exhibit the good catalytic performance for the reduction of H₂O₂, further resulting in significant electrochemical signal amplification. Because the electrochemical signal amplification is closely related to the thrombin concentration, differential pulse voltammetry is used to specifically detect thrombin. Under the optimized conditions, the proposed method has a good linear response ranged from 0.5 pM to 30 nM with a low detection limit of 0.25 pM (S/N = 3) for thrombin. The proposed thrombin aptasensor displays good selectivity, reproducibility and stability, providing a good platform for the ultrasensitive detection of thrombin.

Highly sensitive bioaffinity electrochemiluminescence sensors: Recent advances and future directions

Electrogenerated chemiluminescence (also called electrochemiluminescence and abbreviated ECL) has attracted much attention in various fields of analysis due to the potential remarkably high sensitivity, extremely wide dynamic range and excellent controllability. Electrochemiluminescence biosensor, by taking the advantage of the selectivity of the biological recognition elements and the high sensitivity of ECL technique was applied as a powerful analytical device for ultrasensitive detection of biomolecule. In this review, we summarize the latest sensing applications of ECL bioanalysis in the field of bio affinity ECL sensors including aptasensors, immunoassays and DNA analysis, cytosensor, molecularly imprinted sensors, ECL resonance energy transfer and ratiometric biosensors and give future perspectives for new developments in ECL analytical technology. Furthermore, the results herein discussed would demonstrate that the use of nanomaterials with unique chemical and physical properties in the ECL biosensing systems is one of the most interesting research lines for the development of ultrasensitive electrochemiluminescence biosensors. In addition, ECL based sensing assays for clinical samples analysis and medical diagnostics and developing of immunosensors, aptasensors and cytosensor for this purpose is also highlighted.

A visible light photoelectrochemical sandwich aptasensor for adenosine triphosphate based on MgIn2S4-TiO2 nanoarray heterojunction

This work designed a MgIn₂S₄-TiONA heterojunction by growing MgIn₂S₄ nanoplates on TiO₂ nanowire array (TiONA) for preparation of visible light photoelectrochemical (PEC) sensing platform. The heterojunction exhibited strong absorption of visible light, large surface area and high loading of biomolecules, leading to high sensing sensitivity. Using adenosine triphosphate (ATP), a marker of cell vitality, as the target model, a PEC sandwich aptasensor was constructed by immobilizing capture DNA₁ on MgIn₂S₄ surface. In the presence of ATP and signal DNA₂ with terminal ferrocene as the electron donor, a sandwiched DNA₁-ATP-DNA₂ complex could be formed on the PEC aptasensor. The aptasensor showed excellent performance with a wide linear range from 50 fM to 100 nM and a detection limit of 20 fM. The sensing performance including specificity, reproducibility, stability and practical use were also evaluated, showing promising application of the MgIn₂S₄-TiONA heterojunction in PEC biosensing.

Colorimetric bio-barcode immunoassay for parathion based on amplification by using platinum nanoparticles acting as a nanozyme

A competitive bio-barcode immunoassay is described for the trace detection of parathion in water, pear, cabbage, and rice samples. It is based on amplification by platinum nanoparticle acting as a nanozyme. Gold nanoparticles (AuNPs) were modified with (a) monoclonal antibodies (mAbs) against parathion, and (b) thiolated single-stranded DNA (ssDNA) oligonucleotides. Magnetic nanoparticles (MNPs) were functionalized with ovalbumin coupled with parathion hapten. Parathion and its hapten compete with mAbs on the surface of the AuNPs. Subsequently, the platinum nanoparticles (PtNPs) probe, which was functionalized with the complementary thiolated ssDNA (C-ssDNA), was added to the reaction mixture for the detection of parathion. The signal was catalytically amplified by coupling with platinum nanozyme using teramethylbenzidine and H₂O₂ as the chromogenic system. The immunoassay has a linear range that extends from 0.01-50 μg·L^-1, and the limit of detection is 2.0 × 10^-3 μg·L^-1. The recoveries and relative standard deviations (RSDs) ranged from 91.1-114.4% and 3.6-15.8%, respectively. The method correlates well with data obtained by gas chromatography-tandem mass spectrometry (GC-MS/MS). Graphical abstract The parathion and the magnetic nanoparticles (MNPs) labelled with hapten-OVA competitively reacted to AuNPs modified with mAbs and thiolated DNA for the detection of parathion. The signal was catalyzed by platinum nanozyme. The limit of detection for parathion is 2.0 ng·L^-1.

Synthesis, characterisation and anti-tumour activity of biopolymer based platinum nanoparticles and 5-fluorouracil loaded platinum nanoparticles

A facile and green synthesis of platinum nanoparticles [gum kondagogu platinum nanoparticles (GKPtNP)] using biopolymer- gum kondagogu was developed. The formation of GKPtNP was confirmed by ultraviolet (UV)-visible spectroscopy, scanning electron microscopy-energy dispersive X-ray spectroscopy, transmission electron microscopy, X-ray diffraction, Zeta potential, Fourier transform infrared, inductively coupled plasma mass spectroscopy. The formed GKPtNP are well dispersed, homogeneous with a size of 2-4 ± 0.50 nm, having a negative zeta potential (-46.1 mV) indicating good stability. 5-Fluorouracil (5FU) was loaded onto the synthesised GKPtNP, which leads to the development of a new combination of nanomedicine (5FU-GKPtNP). The in vitro drug release studies of 5FU-GKPtNP in pH 7.4 showed a sustained release profile over a period of 120 min. Agrobacterium tumefaciens induced in vitro potato tumour bioassay was employed for screening the anti-tumour potentials of GKPtNP, 5FU, and 5FU-GKPtNP. The experimental results suggested a complete tumour inhibition by 5FU-GKPtNP at a lower concentration than the GKPtNP and 5FU. Furthermore, the mechanism of anti-tumour activity was assessed by their interactions with DNA using agarose gel electrophoresis and UV-spectroscopic analysis. The electrophoresis results revealed that the 5FU-GKPtNP totally diminishes DNA and the UV-spectroscopic analysis showed a hyperchromic effect with red shift indicating intercalation type of binding with DNA. Over all, the present study revealed that the combined exposure of the nanoformulation resulted in the enhanced anti-tumour effect.

A glassy carbon electrode with electrodeposited silver nanoparticles for aptamer based voltammetric determination of trinitrotoluene using riboflavin as a redox probe

An electrochemical nanoaptasensor is described that is based on the use of a glassy carbon electrode (GCE) modified with electrodeposited silver nanoparticles (AgNPs). An aptamer (Apt) against trinitrotoluene (TNT) was then immobilized on the AgNPs. The addition of TNT to the modified GCE leads to decrease in peak current (typically measured at a potential of -0.45 V vs. Ag/AgCl) of riboflavin which acts as an electrochemical probe. Even small changes in the surface (as induced by binding of Apt to TNT) alter the interfacial properties. As a result, the LOD is lowered to 33 aM, and the dynamic range extends from 0.1 fM to 10 μM without sacrificing specificity. Graphical abstract Schematic presentation of a nanoaptasensor which is based on a glassy carbon electrode (GCE) modified with electrodeposited silver nanoparticles (AgNPs) and aptamer (Apt). It was applied to the detection of 2,4,6-trinitrotoluene (TNT) with the help of riboflavin (RF) as a redox probe.

An aptamer-based fluorescence bio-sensor for chiral recognition of arginine enantiomers

In this study, a novel aptamer - based fluorescence bio-sensor (aptamer-AuNps) was developed for chiral recognition of arginine (Arg) enantiomers based on aptamer and gold nanoparticles (AuNps). Carboxyfluorescein (FAM) labeled aptamers (Apt) were absorbed on AuNps and their fluorescence intensity could be significantly quenched by AuNps based on fluorescence resonance energy transfer (FRET). Once d-Arg or l-Arg were added into the above solution, the aptamer specifically bind to Arg enantiomers and released from AuNps, so the fluorescence intensity of d-Arg system and l-Arg system were all enhanced. The affinity of Apt to l-Arg is tighter to d-Arg, so the enhanced fluorescence signals of l-Arg system was stronger than d-Arg system. What's more, the enhanced fluorescence were directly proportional to the concentration of d-Arg and l-Arg ranging from 0-300 nM and 0-400 nM with related coefficients of 0.9939 and 0.9952, respectively. Furthermore, the method was successfully applied to detection l-Arg in human urine samples with satisfactory results. Eventually, a simple "OR" logic gate with d-Arg &l-Arg as inputs and AuNps aggregation state as outputs was fabricated, which can help us understand the chiral recognition process deeply.

Advances in the design of nanomaterial-based electrochemical affinity and enzymatic biosensors for metabolic biomarkers: A review

This review (with 340 refs) focuses on methods for specific and sensitive detection of metabolites for diagnostic purposes, with particular emphasis on electrochemical nanomaterial-based sensors. It also covers novel candidate metabolites as potential biomarkers for diseases such as neurodegenerative diseases, autism spectrum disorder and hepatitis. Following an introduction into the field of metabolic biomarkers, a first major section classifies electrochemical biosensors according to the bioreceptor type (enzymatic, immuno, apta and peptide based sensors). A next section covers applications of nanomaterials in electrochemical biosensing (with subsections on the classification of nanomaterials, electrochemical approaches for signal generation and amplification using nanomaterials, and on nanomaterials as tags). A next large sections treats candidate metabolic biomarkers for diagnosis of diseases (in the context with metabolomics), with subsections on biomarkers for neurodegenerative diseases, autism spectrum disorder and hepatitis. The Conclusion addresses current challenges and future perspectives. Graphical abstract This review focuses on the recent developments in electrochemical biosensors based on the use of nanomaterials for the detection of metabolic biomarkers. It covers the critical metabolites for some diseases such as neurodegenerative diseases, autism spectrum disorder and hepatitis.

A novel electrochemical aptasensor for highly sensitive and quantitative detection of the streptomycin antibiotic

In the present study, we report a facile approach to employ gold nanoparticle (AuNPs) and thiol graphene quantum dots (GQD-SH) as the nanomaterial for ultrasensitive detection of streptomycin (STR). Based on this strategy, a GQD-SH was immobilized onto the surface of a glassy carbon electrode (GCE). AuNPs have been immobilized on SH groups of GQDs through bonding formation of AuS and Apt have been loaded on the electrode surface through the interaction between thiol group of aptamer. By incubating STR as a target onto the surface of the prepared Apt/AuNPs/GQD-SH/GCE as a proposed nanoaptasensor, the Apt/STR complex was formed and the changes of the electrochemical signal were evaluated with the EIS technique. The proposed nanoaptasensor showed wide linear range from 0.1 to 700pgml^-1. Finally, the proposed nanoaptasensor was successfully applied for the determination of STR in real samples and satisfactory results were obtained.

Nano-Aptasensing in Mycotoxin Analysis: Recent Updates and Progress

Recent years have witnessed an overwhelming integration of nanomaterials in the fabrication of biosensors. Nanomaterials have been incorporated with the objective to achieve better analytical figures of merit in terms of limit of detection, linear range, assays stability, low production cost, etc. Nanomaterials can act as immobilization support, signal amplifier, mediator and artificial enzyme label in the construction of aptasensors. We aim in this work to review the recent progress in mycotoxin analysis. This review emphasizes on the function of the different nanomaterials in aptasensors architecture. We subsequently relate their features to the analytical performance of the given aptasensor towards mycotoxins monitoring. In the same context, a critically analysis and level of success for each nano-aptasensing design will be discussed. Finally, current challenges in nano-aptasensing design for mycotoxin analysis will be highlighted.

Ultra-sensitive aptasensor based on a GQD nanocomposite for detection of hepatitis C virus core antigen

In the present study, by using the aptamer proximity binding assay strategy, a novel electrochemical aptasensor is described for ultrasensitive detection of hepatitis C virus (HCV) core antigen. The immobilization surface is prepared by the modification of a glassy carbon electrode (GCE) with a graphene quantum dots (GQD). GQD were introduced as a novel and suitable substrate for aptamers through π-π stacking interactions, the richness of hydrophilic edges as well as hydrophobic plane in GQD which enhances the aptamer absorption on the electrode surface. Electrochemical impedance spectroscopy (EIS) and cyclic voltammetry (CV) and differential pulse voltammetry (DPV) were performed at each stage of the chemical modification process to confirm the resulting surface changes. EIS technique was used as an efficient alternative detection system for HCV core antigen measurement with detection limit 3.3 pg mL^-1 and two linear concentration range 10-70 pg mL^-1 and 70-400 pg mL^-1. Moreover, the fabricated aptasensor could accurately detect HCV core antigen concentration in human serum samples. Such an aptasensor opens a rapid, selective and sensitive route for HCV core antigen detection and provides a promising strategy for potential applications in clinical diagnostics.

A turn-on fluorescence aptasensor based on carbon dots for sensitive detection of adenosine

A novel turn-on fluorescence aptasensor was designed for adenosine detection based on FRET from ssDNA-CDs to aptamer-AuNPs.

Designing an ultra-sensitive aptasensor based on an AgNPs/thiol-GQD nanocomposite for TNT detection at femtomolar levels using the electrochemical oxidation of Rutin as a redox probe

In this paper, for the first time a highly sensitive and low-cost electrochemical aptasensor was fabricated based on a silver nanoparticles/thiol functionalized graphene quantum dot (AgNPs/thiol-GQD) nanocomposite for the measurement of 2,4,6-Trinitrotoluen (TNT) as a nitroaromatic explosive. For the first time Rutin (RU) as a biological molecule with inherent properties was used as the redox probe in the development of the TNT aptasensor was used. The system was based on a TNT-binding aptamer which is covalently attached onto the surface of a glassy carbon electrode (GCE) modified with the nanocomposite for the formation of a sensing layer and improving the performance of the aptasensor. Using the proposed nanocomposite provides a specific platform with increased surface area which is capable of loading more Aptamer (Ap) molecules as a receptor element of TNT on the electrode surface. So, TNT molecules is in an upward position to be measured and the obtained results indicate that the aptasensor exhibits two wide linear ranges and an unprecedented LOD compared with previously reported analytical methods for TNT detection. Applicability of the developed aptasensor to easily detect TNT in real samples was evaluated. It seems that the proposed strategy can be expanded to other nanoparticles and is expected to have promising implications in the design of electrochemical sensors or biosensors for the detection of various targets.

Covalent attachment of aptamer onto nanocomposite as a high performance electrochemical sensing platform: Fabrication of an ultra-sensitive ibuprofen electrochemical aptasensor

In the present study, we report a selective electrochemical aptasensor for the ultrasensitive detection of an anti-inflammatory drug, ibuprofen (IBP). The proposed system was achieved by the modification of a glassy carbon electrode (GCE) with multiwalled carbon nanotubes/ionic liquid/chitosan (MWCNTs/IL/Chit) nanocomposite and the covalent immobilization of the IBP specific aptamer (Apt) onto the modified electrode surface followed by methylene blue (MB) intercalated onto the Apt as the electrochemical redox marker. Upon the incubation of the IBP as a target in the proposed aptasensor, the peak current of MB decreases due to the formation of the Apt-IBP complex and the displacement of MB from the immobilized Apt onto the modified electrode surface. The nanocomposite not only increases the electrode surface area and accelerate the electron transfer kinetics but also it provides a highly stable matrix to enhance the loading amount of the Apt DNA sequence. Through differential pulse voltammetry (DPV) experiments, it was found that the proposed aptasensor could detect the IBP with a linear range (70pM up to 6μM) and the detection limit (LOD) as low as 20pM. The results showed that the aptasensor had good sensitivity, stability, reproducibility, and specificity to detect the IBP. The proposed aptasensor was successfully applied for measuring the IBP concentration in real samples. Based on our experiments we can say that the present method proposes new horizons for the development of other aptasensors for diagnostic application in biosensing.

Adenosine-Activated Nanochannels Inspired by G-Protein-Coupled Receptors

A bioinspired adenosine activated nanodevice is demonstrated in which the conformations of the designed aptamer change and cause signal transmission according to the emergence of adenosine. This bioinspired system exhibits very high response ratios (activated/nonactivated ratio up to 614) and excellent stability and reversibility, and shows promising applications in the fields of biosensors, pharmaceutica, and healthcare systems.

Dual-Target Electrochemical Biosensing Based on DNA Structural Switching on Gold Nanoparticle-Decorated MoS2 Nanosheets

A MoS2-based electrochemical aptasensor has been developed for the simultaneous detection of thrombin and adenosine triphosphate (ATP) based on gold nanoparticles-decorated MoS2 (AuNPs-MoS2) nanocomposites. Two different aptamer probes labeled with redox tags were simultaneously immobilized on an AuNPs-MoS2 film modified electrode via Au-S bonds. The aptamers presented structural switches with the addition of target molecules (thrombin and ATP), resulting in methylene blue (MB) far from or ferrocene (Fc) close to the electrode surface. Therefore, a dual signaling detection strategy was developed, which featured both "signal-on" and "signal-off" elements in the detection system because of the target-induced structure switching. This proposed aptasensor could simultaneously determine ATP and thrombin as low as 0.74 nM ATP and 0.0012 nM thrombin with high selectivity, respectively. In addition, thrombin and ATP could act as inputs to activate an AND logic gate.

A universal label-free fluorescent aptasensor based on Ru complex and quantum dots for adenosine, dopamine and 17β-estradiol detection

Based on specific aptamer binding properties, a strategy for adenosine, dopamine and 17β-estradiol detection was realised by employing Ru complex and quantum dots (QDs) as fluorescence probes. Ru complex, which could quench the fluorescence of QDs, preferred to bind with aptamer DNA and resulted in the fluorescence rise of QDs. When the aptamer DNA was incubated with the target first, it could not bind with Ru complex and the fluorescence of QDs was quenched. Under the optimal condition, the fluorescence intensity was linearly proportional to the concentration of adenosine, dopamine and 17β-estradiol with a limit of detection (LOD) of 101 nM, 19 nM and 37 nM, respectively. The experiments in fetal bovine serum were also carried out with good results. This universal method was rapid, label-free, low-cost, easy-operating and highly repeatable for the detection of adenosine, dopamine and 17β-estradiol. Qualitative detection by naked eyes was also available without complex instruments. It could also be extended to detect various analytes, such as metal ions, proteins and small molecules by using appropriate aptamers.

Ultrasensitive electrochemical immunosensor for PSA biomarker detection in prostate cancer cells using gold nanoparticles/PAMAM dendrimer loaded with enzyme linked aptamer as integrated triple signal amplification strategy

In the present study, a triple signal amplification strategy was developed for ultrasensitive immunosensing of prostate-specific antigen (PSA) tumor marker. The proposed system was achieved by modification of glassy carbon electrode with graphene oxide/chitosan film and covalently attached of monoclonal PSA antibody and thionine as redox probe onto the modified electrode surface. Then, immunosensing was completed using sandwich-type immunoreaction of the PSA-antigen between anti-PSA immobilized on the graphene/chitosan interface and PSA-aptamer. For improve the sensitivity, polyamidoamine dendrimer-encapsulated gold nanoparticles (AuNPs-PAMAM) was used for covalent attachment of PSA-aptamer and HRP linked aptamer (Au-PAMA/aptamer-HRP) as electrochemical label in the sandwich format and electrocatalytic reduction of H2O2 in the presence of enzymatically oxidized thionine was measured. Under optimized condition, the obtained detection limit and linear concentration range were 10 fg ml(-1)(S/N=3) and 0.1 pg ml(-1) to 90 ngml(-1) respectively, using differential pulse voltammetry as measuring technique. In addition, electrochemical impedance spectroscopy (EIS) was used as simple, rapid, low cost label free analytical technique for PSA measurement with detection limit of 5 pg ml(-1) at concentration range up to 35 ng ml(-1). Finally, the immunosensor is used to PSA detection in human serum and prostate tissue samples and the obtained result is well agreed with the values obtained by the standard ELISA method. The obtained results indicate the proposed immunosensor can be used for monitor the differences in PSA concentration in cancer tissue samples which holds great promise in clinical screening of cancer biomarkers.

Carbon Nanotube Nanocomposites with Highly Enhanced Strength and Conductivity for Flexible Electric Circuits

Carbon nanotubes (CNTs) have an important role in nanotechnology due to their unique properties, retaining the inherent material flexibility, superior strength, and electrical conductivity, unless the bottleneck of CNTs persists and the aggregated structure is overcome. Here, we report on the highly enhanced mechanical and electrical properties of the CNT-chitosan nanocomposites through homogeneous dispersion of CNTs into chitosan solution using a high-pressure homogenizer. The optimal condition is a 50% (w/w) chitosan-CNT film, providing about 7 nm thickness of homogeneous chitosan layer on CNTs, a good tensile strength of 51 MPa, high electrical conductivity under 16 Ω/sq, and a stable bending and folding performance. This CNT-chitosan nanocomposite with highly enhanced properties is an amenable material to fabricate structures of various shapes such as films, sensors, and circuits and also enables a simple and cost-effective approach to improve the performance of a device that presents the first flexible and soft electric circuits yet reported using only CNT-chitosan as the conductor.

Fabrication of an ultrasensitive ibuprofen nanoaptasensor based on covalent attachment of aptamer to electrochemically deposited gold-nanoparticles on glassy carbon electrode

The paper reports the development of an ultrasensitive nanoaptasensor based on the covalent attachment of an aptamer (Apt) to gold-nanoparticles (AuNPs) deposited on the surface of a glassy carbon electrode (GCE) as the unique platform. The developed nanoaptasensor was utilized to assay the anti-inflammatory drug, ibuprofen (IBP). The sensing platform was fabricated using a single-stage electrodeposite approach. It is worth noting that the proposed nanoaptasensor combines the advantages of the deposition of neatly arranged AuNPs (enlarged active surface area and strengthened electrochemical signal) and the elimination of enzymes or antibodies for the amplified detection of IBP, with the covalent attachment of the Apt to the surface of the modified electrode. Moreover, the newly developed nanoaptasensor embraces a number of attractive features such as ease of fabrication, low detection limit, excellent selectivity, good stability and a wide linear range with respect to IBP. Meanwhile, interference of common interfering analgesic drugs was effectively avoided. In optimized empirical conditions, the response current of the nanoaptasensor is linear to IBP concentrations from 0.005 nmol(-1) to 7 nmol(-1) with the detection limit (LOD) as accurate as 0.5 pmol(-1). This LOD value proves more sensitive in comparison with previously reported methods. Thus, the fabricated nanoaptasensor can serve as a powerful sensor for rapid diagnosis of IBP in human blood samples and shows great potential for practical bioapplication.

A turn-on fluorescent aptasensor for adenosine detection based on split aptamers and graphene oxide

A simple, sensitive and selective turn-on fluorescent aptasensor for adenosine detection was developed based on target-induced split aptamer fragment conjunction and different interactions of graphene oxide and the two states of the designed aptamer sequences.

Synthesis and electrocatalytic effect of Ag@Pt core-shell nanoparticles supported on reduced graphene oxide for sensitive and simple label-free electrochemical aptasensor

Bimetallic Ag@Pt core-shell nanoparticles supported on reduced graphene oxide nanosheets (Ag@Pt-GRs) was synthesized and used as novel desirable sensor platform and electrocatalyst for catechol as probe in aptasensor. Gold screen-printed electrodes modified with Ag@Pt-GRs and applied to advance enzyme-free and label-free electrochemical aptasensor for detection of protein biomarker tumor necrosis factor-alpha (TNF-α). The morphology of the Ag@Pt-GRs could be characterized by transmission electron microscopy, X-ray diffraction and UV-vis spectra. The results showed that these nanocomposite exhibited attractive electrocatalytic activity and also yielded large surface area, which improve the amount of immobilized TNF-α aptamer. Due to the excellent electrocatalytic activity of Ag@Pt-GRs towards the oxidation of catechol, determination of TNF-α antigen was based on its obstruction to the electrocatalytic oxidation of catechol by Ag@Pt-GRs after binding to the surface of electrode through interaction with the aptamer. The calibration curve was obtained by differential pulse voltammetry and square wave voltammetry. Under optimum conditions, the results demonstrated that this electrochemical aptasensor possessed a dynamic range from 0.0 pg/mL to 60 pg/mL with a low detection limit of 2.07 pg/mL for TNF-α. The analytical usefulness of the aptasensor was finally demonstrated analyzing serum samples. The simple fabrication method, high sensitivity, specificity, good reproducibility and stability as well as acceptable accuracy for TNF-α detection in human serum samples are the main advantages of this aptasensor, which might have broad applications in protein diagnostics and bioassay.

A highly selective and sensitive cocaine aptasensor based on covalent attachment of the aptamer-functionalized AuNPs onto nanocomposite as the support platform

Based on the conformational changes of the aptamer-functionalized gold nanoparticles (AuNPs) onto MWCNTs/IL/Chit nanocomposite as the support platform, we have developed a sensitive and selective electrochemical aptasensor for the detection of cocaine. The 5'-amine-3'-AuNP terminated aptamer is covalently attached to a MWCNTs/IL/Chit nanocomposite. The interaction of cocaine with the aptamer functionalized AuNP caused the aptamer to be folded and the AuNPs with negative charge at the end of the aptamer came to the near of electrode surface therefore, the electron transfer between ferricyanide (K3Fe(CN)6) as redox probe and electrode surface was inhibited. A decreased current of (K3Fe(CN)6) was monitored by differential pulse voltammetry technique. In an optimized condition the calibration curve for cocaine concentration was linear up to 11 μM with detection limit (signal-to-noise ratio of 3) of 100 pM. To test the selectivity of the prepared aptasensor sensing platform applicability, some analgesic drugs as the interferes were examined. The potential of the aptasensor was successfully applied for measuring cocaine concentration in human blood serum. Based on our experiments it can be said that the present method is absolutely beneficial in developing other electrochemical aptasensor.

Highly sensitive electrochemical aptasensor for immunoglobulin E detection based on sandwich assay using enzyme-linked aptamer

Here, we describe the fabrication of an electrochemical immunoglobulin E (IgE) aptasensor using enzyme-linked aptamer in the sandwich assay method and thionine as redox probe. In this protocol, 5'-amine-terminated IgE aptamer and thionine were covalently attached on glassy carbon electrode modified with carbon nanotubes/ionic liquid/chitosan nanocomposite. Furthermore, another IgE aptamer was modified with biotin and enzyme horseradish peroxidase (HRP), which attached to the aptamer via biotin-streptavidin interaction. Electrochemical impedance spectroscopy (EIS) and cyclic voltammetry were performed at each stage of the chemical modification process to confirm the resulting surface changes. The presence of IgE induces the formation of a double aptamer sandwich structure on the electrode, and the electrocatalytic reduction current of thionine in the presence of hydrogen peroxide was measured as the sensor response. Under optimized conditions and using differential pulse voltammetry as the measuring technique, the proposed aptasensor showed a low detection limit (6 pM) and high sensitivity (1.88 μA nM(-1)). This aptasensor also exhibited good stability and high selectivity for IgE detection without an interfering effect of some other proteins such as bovine serum albumin (BSA) and lysozyme. The application of the aptasensor for IgE detection in human serum sample was also investigated. The proposed protocol is quite promising as an alternative sandwich approach for various protein assays.