A fluorescent aptasensor based on DNA-scaffolded silver-nanocluster for ochratoxin A detection

Recent advances in nucleic acid signal amplification-based aptasensors for sensing mycotoxins

Mycotoxin contamination in food products may cause serious health hazards and economic losses. The effective control and accurate detection of mycotoxins have become a global concern. Even though a variety of methods have been developed for mycotoxin detection, most conventional methods suffer from complicated operation procedures, low sensitivity, high cost, and long assay time. Therefore, the development of simple and sensitive methods for mycotoxin assay is highly needed. The introduction of nucleic acid signal amplification technology (NASAT) into aptasensors significantly improves the sensitivity and facilitates the detection of mycotoxins. Herein, we give a comprehensive review of the recent advances in NASAT-based aptasensors for assaying mycotoxins and summarize the principles, features, and applications of NASAT-based aptasensors. Moreover, we highlight the challenges and prospects in the field, including the simultaneous detection of multiple mycotoxins and the development of portable devices for field detection.

Polycarboxyl ionic liquid functionalized Yb-MOFs nanoballs based dual-wavelength responsive photoelectrochemical aptasensor for the simultaneous determination of AFB1 and OTA

Developing an accurate and precise approach for the simultaneous detection of ochratoxin A (OTA) and aflatoxin B1 (AFB1) is significant for food safety surveillance. Herein, a photoelectrochemical sensing platform was constructed based on polycarboxylic ionic liquid functionalized metal-organic framework integrated with gold nanoparticles (Yb-MOFs@AuNPs). Sulfhydryl functionalized hairpin DNA (hDNA) was immobilized on a Yb-MOFs@AuNPs modified glassy carbon electrode (GCE) surface through Au-S bond. After blocking residual active binding sites with BSA, gold nanoparticles-labeled AFB1 aptamer (AuNPs-Apt 1) and gold nanorods-labeled OTA aptamer (AuNRs-Apt 2) were introduced to construct a photoelectrochemical aptasensor for the simultaneous determination of AFB1 and OTA. Due to the surface plasmon resonance effect and the nanometer size effect of gold nanomaterials, the photoelectrochemical aptasensor can output photocurrent responses as being excited with different wavelengths at 520 nm and 808 nm, respectively. When the AFB1 and OTA concentration in the range of 0.001-50.0 ng mL-1, a good linear relationship between the photocurrent difference (ΔI) before and after recognizing targets and the logarithm of AFB1 or OTA concentration was obtained. The detection limits for AFB1 and OTA were 0.40 pg mL-1 and 0.19 pg mL-1, respectively. AFB1 and OTA in corn samples were detected simultaneously by the photoelectrochemical aptasensor.

Simultaneous measurement of ochratoxin A and aflatoxin B1 using a duplexed-electrochemical aptasensor based on carbon nanodots decorated with gold nanoparticles and two redox probes hemin@HKUST-1 and ferrocene@HKUST-1

An electrochemical aptasensor was developed for the simultaneous determination of ochratoxin A (OTA) and aflatoxin B1 (AFB1). Two compounds hemin@HKUST-1 and ferrocene@HKUST-1 were synthesized by encapsulating hemin and ferrocene inside the MOF made by copper nodes and trimesic acid, known as HKUST-1 MOF, and then bind to complementary DNA sequences of OTA aptamer (cDNA1) and AFB1 aptamer (cDNA2), respectively. Then, the hemin@HKUST-1/cDNA1 and ferrocene@HKUST-1/cDNA2 bioconjugates were deposited on the glassy carbon electrode (GCE) modified with carbon nanodots decorated with gold nanoparticles (AuNPs-CNDs). In the absence of the two mycotoxins, the current response related to the electroactive labels of hemin and ferrocene in the discussed bioconjugates have been measured at two separate potentials simultaneously by the differential pulse voltammetry technique (DPV). Using the described aptasensor, it is possible to measure both OTA and AFB1 mycotoxins in the linear concentration range of 1.0 × 10-2 to 100.0 ng mL-1. Also, the detection limits of OTA and AFB1 were 4.3 × 10-3 ng mL-1 and 5.2 × 10-3 ng mL-1, respectively. Finally, the ability of the proposed duplex aptasensor for the simultaneous measurement of OTA and AFB1 in a corn flour sample was investigated and completely satisfactory results were achieved.

Recent advances on the electrochemical and optical biosensing strategies for monitoring microRNA-21: a review

The small non-coding RNA, microRNA-21 (miR-21), is dysregulated in various cancers and can be considered an appropriate target for therapeutic approaches. Therefore, the detection of miR-21 concentration is important in the diagnosis of diseases. Low specificity and the cost of materials are two necessary limitations in the traditional diagnosis method such as RT-PCR, northern blotting and microarray analysis. Biosensor technology can play an effective role in improving the quality of human life due to its capacity of rapid diagnosis, monitoring different markers, suitable sensitivity, and specificity. Moreover, bioanalytical systems have an essential role in the detection of biomolecules or miRNAs due to their critical features, including easy usage, portability, low cost and real-time analysis. Electrochemical biosensors based on novel nanomaterials and oligonucleotides can hybridize with miR-21 in different ranges. Moreover, optical biosensors and piezoelectric devices have been developed for miR-21 detection. In this study, we have evaluated different materials used in bioanalytical systems for miR-21 detection as well as various nanomaterials that offer improved electrodes for its detection.

DNA Templated Silver Nanoclusters for Bioanalytical Applications: A Review

Due to their unique programmability, biocompatibility, photostability and high fluorescent quantum yield, DNA templated silver nanoclusters (DNA Ag NCs) have attracted increasing attention for bioanalytical application. This review summarizes the recent developments in fluorescence properties of DNA templated Ag NCs, as well as their applications in bioanalysis. Finally, we herein discuss some current challenges in bioanalytical applications, to promote developments of DNA Ag NCs in biochemical analysis.

Ochratoxin A as alarming health in livestock and human: A review on molecular interactions, mechanism of toxicity, detection, detoxification, and dietary prophylaxis

Ochratoxin A (OTA) is a toxic metabolite produced by Aspergillus and Penicillium fungi commonly found in raw plant sources and other feeds. This review comprises an extensive evaluation of the origin and proprieties of OTA, toxicokinetics, biotransformation, and toxicodynamics of ochratoxins. In in vitro and in vivo studies, the compatibility of OTA with oxidative stress is observed through the production of free radicals, resulting in genotoxicity and carcinogenicity. The OTA leads to nephrotoxicity as the chief target organ is the kidney. Other OTA excretion and absorption rates are observed, and the routes of elimination include faeces, urine, and breast milk. The alternations in the Phe moiety of OTA are the precursor for the amino acid alternation, bringing about Phe-hydroxylase and Phe-tRNA synthase, resulting in the complete dysfunction of cellular metabolism. Biodetoxification using specific microorganisms decreased the DNA damage, lipid peroxidation, and cytotoxicity. This review addressed the ability of antioxidants and the dietary components as prophylactic measures to encounter toxicity and demonstrated their capability to counteract the chronic exposure through supplementation as feed additives.

Ligand-protected nanoclusters and their role in agriculture, sensing and allied applications

Nano biotechnology, when coupled with green chemistry, can revolutionize human life because of the vast opportunities and benefits it can offer to the quality of human life. Luminescent metal nanoclusters (NCs) have recently developed as a potential research area with applications in different areas like medical, imaging, sensing etc. Recently these new candidates have proved to be beneficial in the food supply chain enabling controlled release of nutrients, pesticides and as nanosensors for the detection of contaminants and play roles in healthy food storage and maintaining food quality. An assortment of nanomaterials has been employed for these applications and reviews have been published on the use of nanotechnology in agriculture. Ligand-protected metal nanoclusters are a distinctive class of small organic-inorganic nanostructures that garnered immense research interest in recent years owing to their stability at specific "magic size" compositions along with tunable properties that make them promising candidates for a wide range of nanotechnology-based applications. This review tries to consolidate the recent developments in the area of ligand-protected nanoclusters in connection with the detection of pesticides, food contaminants, heavy metal ions and plant growth monitoring for healthy agricultural practices. Its antimicrobial activity to manage the microbial contamination is highlighted. The review also throws light on the various perspectives by which food production and allied areas will be transformed in future.

Split Aptamers Immobilized on Polymer Brushes Integrated in a Lab-on-Chip System Based on an Array of Amorphous Silicon Photosensors: A Novel Sensor Assay

Innovative materials for the integration of aptamers in Lab-on-Chip systems are important for the development of miniaturized portable devices in the field of health-care and diagnostics. Herein we highlight a general method to tailor an aptamer sequence in two subunits that are randomly immobilized into a layer of polymer brushes grown on the internal surface of microfluidic channels, optically aligned with an array of amorphous silicon photosensors for the detection of fluorescence. Our approach relies on the use of split aptamer sequences maintaining their binding affinity to the target molecule. After binding the target molecule, the fragments, separately immobilized to the brush layer, form an assembled structure that in presence of a "light switching" complex [Ru(phen)2(dppz)]2+, emit a fluorescent signal detected by the photosensors positioned underneath. The fluorescent intensity is proportional to the concentration of the target molecule. As proof of principle, we selected fragments derived from an aptamer sequence with binding affinity towards ATP. Using this assay, a limit of detection down to 0.9 µM ATP has been achieved. The sensitivity is compared with an assay where the original aptamer sequence is used. The possibility to re-use both the aptamer assays for several times is demonstrated.

Microbial detoxification of mycotoxins in food and feed

Mycotoxins are metabolites produced by fungi growing in food or feed, which can produce toxic effects and seriously threaten the health of humans and animals. Mycotoxins are commonly found in food and feed, and are of significant concern due to their hepatotoxicity, nephrotoxicity, carcinogenicity, mutagenicity, and ability to damage the immune and reproductive systems. Traditional physical and chemical detoxification methods to treat mycotoxins in food and feed products have limitations, such as loss of nutrients, reagent residues, and secondary pollution to the environment. Thus, there is an urgent need for new detoxification methods to effectively control mycotoxins and treat mycotoxin pollution. In recent years, microbial detoxification technology has been widely used for the degradation of mycotoxins in food and feed because this approach offers the potential for treatment with high efficiency, low toxicity, and strong specificity, without damage to nutrients. This article reviews the application of microbial detoxification technology for removal of common mycotoxins such as Aflatoxin, Ochratoxin, Zearalenone, Deoxynivalenol, and Fumonisins, and discusses the development trend of this important technology.

Detection Strategies of Zearalenone for Food Safety: A Review

Zearalenone (ZEN) is a toxic compound produced by the metabolism of fungi (genus Fusarium) that threaten the food and agricultural industry belonging to the in foods and feeds. ZEN has toxic effects on human and animal health due to its mutagenicity, teratogenicity, carcinogenicity, nephrotoxicity, immunotoxicity, and genotoxicity. To ensure food safety, rapid, precise, and reliable analytical methods can be developed for the detection of toxins such as ZEN. Different selective molecular diagnostic elements are used in conjunction with different detection strategies to achieve this goal. In this review, the use of electrochemical, colorimetric, fluorometric, refractometric as well as other strategies were discussed for ZEN detection. The success of the sensors in analytical performance depends on the development of receptors with increased affinity to the target. This requirement has been met with different immunoassays, aptamer-assays, and molecular imprinting techniques. The immobilization techniques and analysis strategies developed with the combination of nanomaterials provided high precision, reliability, and convenience in ZEN detection, in which electrochemical strategies perform the best.

Dark field microscope-based single nanoparticle identification coupled with statistical analysis for ultrasensitive biotoxin detection in complex sample matrix

A novel approach for ultrasensitive ochratoxin A (OTA) detection is reported based on dark field microscope-based single nanoparticle identification coupled with a statistical analysis method. OTA aptamers were firstly hybridized with a single-stranded DNA (DNA1) to form an identification probe (DNA1-Apt). The aptamers separate from DNA1 in the presence of OTA and are released from the identification probe. Then, another single-stranded DNA (DNA2) hybridizes with DNA1 and result in the aggregation of gold nanoparticles (AuNPs). Therefore, the presence of AuNP aggregates is the evidence of the presence of OTA, while AuNP aggregates can be easily identified together with the monomers under dark field microscopic inspection. On the other hand, by counting the aggregation rate (the number of AuNP aggregates versus the number of AuNP monomers) with a statistical analysis method, OTA could be quantitatively detected. The detection range for OTA was 0.1 pg/mL ~ 30 ng/mL and the limit of detection was 0.1 pg/mL. The proposed sensor has comparative detection performance to sensors utilizing a number of signal amplification procedures, with the additional advantages of simplicity and high efficiency. The sensor can also be adopted for other target detection simply by replacing the identification probes. Graphical abstract The schematic of the AuNP aggregation for OTA detection. The OTA aptamers were competitively banded by OTA and induced form AuNP aggregation after adding DNA2 and AuNPs2. Subsequently, AuNPs were detected under dark field microscope and statistical analysis.

Aptamer-Based Biosensor for Detection of Mycotoxins

Mycotoxins are a large type of secondary metabolites produced by fungi that pose a great hazard to and cause toxic reactions in humans and animals. A majority of countries and regulators, such as the European Union, have established a series of requirements for their use, and they have also set maximum tolerance levels. The development of high sensitivity and a specific analytical platform for mycotoxins is much in demand to address new challenges for food safety worldwide. Due to the superiority of simple, rapid, and low-cost characteristics, aptamer-based biosensors have successfully been developed for the detection of various mycotoxins with high sensitivity and selectivity compared with traditional instrumental methods and immunological approaches. In this article, we discuss and analyze the development of aptasensors for mycotoxins determination in food and agricultural products over the last 11 years and cover the literatures from the first report in 2008 until the present time. In addition, challenges and future trends for the selection of aptamers toward various mycotoxins and aptasensors for multi-mycotoxins analyses are summarized. Given the promising development and potential application of aptasensors, future research studies made will witness the great practicality of using aptamer-based biosensors within the field of food safety.

Intrinsic "Turn-On" Aptasensor Detection of Ochratoxin A Using Energy-Transfer Fluorescence

Ochratoxin A (OTA) is an intrinsically fluorescent phenolic mycotoxin that contaminates a wide range of food products and is a serious health threat to animals and humans. An OTA binding aptamer (OTABA) that folds into an antiparallel G-quadruplex (GQ) in the absence and presence of target OTA has been incorporated into a vast variety of aptasensor platforms for OTA detection. The development of a simple, aptamer-based approach would allow for detection of the toxin without the use of complex analytical instrumentation, which has been the gold standard for OTA detection thus far. However, to date, none of the aptasensor platforms have utilized the natural fluorescence of the phenolic toxin for detection. Herein, we report that OTA binding to OTABA involves π-stacking interactions that lead to GQ-to-toxin energy transfer (ET), which affords a "turn-on" fluorescence self-signaling platform in which the emission of the aptamer-target complex is enhanced in comparison to the free toxin alone. Selective excitation of the GQ-OTA complex at 256 nm leads to a 4-fold enhancement in OTA fluorescence. The GQ-OTA ET detection platform boasts a limit of detection ∼2 ng/mL, which is comparable to a previously demonstrated fluorescence resonance energy transfer immunoassay platform for OTA detection, and displays excellent OTA selectivity and recovery from red wine samples.

A review on recent developments in optical and electrochemical aptamer-based assays for mycotoxins using advanced nanomaterials

This review (with 163 refs) covers the recent developments of nanomaterial-based optical and electrochemical sensors for mycotoxins. The review starts with a brief discussion on occurrence, distribution, toxicity of mycotoxins and the legislations in monitoring their levels. It further outlines the research methods, various recognition matrices and the strategies involved in the development of highly sensitive and selective sensor systems. It also points out the salient features and importance of aptasensors in the detection of mycotoxins along with the different immobilization methods of aptamers. The review meticulously discusses the performance of different optical and electrochemical sensors fabricated using aptamers coupled with nanomaterials (CNT, graphene, metal nanoparticles and metal oxide nanoparticles). The review addresses the limitations in the current developments as well as the future challenges involved in the successful construction of aptasensors with the functionalized nanomaterials. Graphical abstract Recent developments in nanomaterial based aptasensors for mycotoxins are summarized. Specifically, the efficiency of the nanomaterial coupled aptasensors (such as CNT, graphene, metal nanoparticles and metal oxide nanoparticles) in optical and electrochemical methods are discussed.

An aptamer-based fluorometric zearalenone assay using a lighting-up silver nanocluster probe and catalyzed by a hairpin assembly

An enzyme-free fluorometric assay is described for the determination of zearalenone (ZEN). The method combines (a) catalyzed hairpin assembly (CHA), (b) ultrahigh fluorescent light-up G-rich DNA sequences in proximity to silver nanoclusters (Ag NCs), and (c) the use of aptamers (Apt). In the presence of ZEN, the inhibit sequence (Inh) is released from the aptamer-trigger sequence (Apt-T) via the binding of ZEN and the aptamer of Apt-T. The free Apt-T acts as a switch that opens the hairpins H1 and H2 to generate H1-H2 complex. The released Apt-T is available to trigger the next round of CHA between H1 and H2. Finally, the hybridization between H1 and the Ag NCs probe (P) causes the G-rich sequence to be in close proximity to the dark Ag NCs encapsulated by P. This leads to highly efficient lighting up of the Ag NCs and the production of amplified fluorescence with excitation/emission peaks at 575/628 nm. Under the optimized conditions, a linear correlation was observed with concentrations ranging from 1.3 pg mL^-1 to 100 ng mL^-1, and the limit of detection was 0.32 pg mL^-1 (at S/N = 3). The method was successfully validated by analyzing maize and beer for levels of ZEN after a simple sample preparation procedure. Graphical abstractSchematic of the assay. The inhibit sequence (Inh) is released from aptamer-trigger sequence (Apt-T) via binding of ZEN and aptamer. The free Apt-T triggers catalyzed hairpin assembly (CHA).G-rich DNA is in proximity to silver nanoclusters (Ag NCs) and fluorescence intensity increases to detect ZEN.

A DNA electrochemical biosensor based on triplex DNA-templated Ag/Pt nanoclusters for the detection of single-nucleotide variant

A label-free electrochemical biosensor based on the triplex DNA-templated Ag/Pt bimetallic nanoclusters (triplex-Ag/PtNCs) and locked nucleic acid (LNA) modified X-shaped DNA probe was developed for the detection of single-nucleotide variant (SNV) related to β-thalassemia. Firstly, using triplex DNA as template, a site-specific and homogeneous Ag/PtNCs was prepared, which can effectively catalyze the 3,3,5,5-tetramethylbenzidine-H₂O₂ system and thus be employed as a signal reporter in the field of electrochemical biosensor. Secondly, the LNA modified X-shaped probes were assembled on gold electrode surface, which can only be dissociated in the presence of target, leading to the hybridization with triplex-Ag/PtNCs and significant increase of current signal. In this way, the detection limit for SNV of β-thalassemia was 0.8 fM with variant allele frequency (VAF) as low as 0.0001%.

Using Magnetic Multiwalled Carbon Nanotubes as Modified QuEChERS Adsorbent for Simultaneous Determination of Multiple Mycotoxins in Grains by UPLC-MS/MS

The simultaneous detection of multiple mycotoxins is important due to the increased toxic effects of combined mycotoxins in grains. In this research, a combination of modified QuEChERS with ultrahigh-performance liquid chromatography-tandem mass spectrometry (UPLC-MS/MS) was used for simultaneous detection of 20 mycotoxins in grains. A series of different types of magnetic (Fe₃O₄) nanoparticles modified with multiwalled carbon nanotubes (Fe₃O₄-MWCNTs) were designed as modified QuEChERS adsorbents for facile and efficient purification and for target interferences removal in the matrices. When there is an external magnetic field, the proposed modified QuEChERS method uses a shorter pretreatment time compared with the traditional QuEChERS method, which makes it possible to conduct high-throughput analyses. To optimize the QuEChERS process, the extraction solvent and the type and amount of the Fe₃O₄-MWCNTs were investigated. Under optimal conditions, the method was validated and showed satisfactory linearity (r² ≥ 0.9965), good recovery (73.5-112.9%), good precision (1.3-12.7%), and excellent sensitivity (ranging from 0.0021 to 5.4457 ng g^-1), which indicates that this method can be used for detecting multiple mycotoxins in real samples.

A cytosine-rich hairpin DNA loaded with silver nanoclusters as a fluorescent probe for uranium(IV) and mercury(II) ions

A dually responsive fluorescent probe for determination of U(IV) and mercury(II) ions was synthesized. The probe consists of a cytosine-rich hairpin DNA loaded with silver nanoclusters (DNA-AgNCs). The fluorescence of the AgNCs is found to be quenched by UO₂(II) at pH 5.0 and Hg(II) at pH 7.0 due to combined static and dynamic quenching. Under the optimal conditions, the green fluorescence of the DNA-AgNCs, best measured at excitation/emission wavelengths of 420/525 nm, decreases in the 4.0 to 75 pM UO₂(II) concentration range, and in the 0.3 to 8.0 nM Hg(II) concentration range. The respective detection limits are as low as 1.8 pM and 0.1 nM. The method was successfully applied to the determination of UO₂(II) and Hg(II) in (spiked) pond and taps waters and in soil extracts. Graphical abstract A label-free DNA was designed to synthesize green-fluorescent silver nanoclusters (AgNCs) and used for rapid dual detection of uranyl ions (UO₂(II)) at pH 5.0 and of mercury ions (Hg(II)) at pH 7.0 in environmental samples.

Advances in biosensors for the detection of ochratoxin A: Bio-receptors, nanomaterials, and their applications

Ochratoxin A (OTA) is a class of mycotoxin mainly produced by the genera Aspergillus and Penicillium. OTA can cause various forms of kidney, liver and brain diseases in both humans and animals although trace amount of OTA is normally present in food. Therefore, development of fast and sensitive detection technique is essential for accurate diagnosis of OTA. Currently, the most commonly used detection methods are enzyme-linked immune sorbent assays (ELISA) and chromatographic techniques. These techniques are sensitive but time consuming, and require expensive equipment, highly trained operators, as well as extensive preparation steps. These drawbacks limit their wide application in OTA detection. On the contrary, biosensors hold a great potential for OTA detection at for both research and industry because they are less expensive, rapid, sensitive, specific, simple and portable. This paper aims to provide an extensive overview on biosensors for OTA detection by highlighting the main biosensing recognition elements for OTA, the most commonly used nanomaterials for fabricating the sensing interface, and their applications in different read-out types of biosensors. Current challenges and future perspectives are discussed as well.

DNA template-mediated click chemistry-based portable signal-on sensor for ochratoxin A detection

A novel signal-on portable sensing system has been developed for OTA detection using personal glucose meter (PGM) as signal transducer. In the study, we explore the potential of using a short dsDNA as template to trigger the "click" ligation of two DNA strands, further improve the stability of DNA strand on the magnetic beads (MBs) surface, and thereby reduce the background signal. Compared with no "click" ligation, the background signal decreases 7.5 times. Both the sensitivity and selectivity are greatly promoted. A high sensitivity with OTA detection down to 72 pg/mL is achieved, which is comparable with several existing detectors, such as fluorescence-based detectors and electrochemical detectors. The feasibility of the strategy in real samples is well verified and evaluated by detecting OTA in feed samples, indicating the potential application in the food safety field.

Aptasensors as the future of antibiotics test kits-a case study of the aptamer application in the chloramphenicol detection

Antibiotics are a type of antimicrobial drug with the ubiquitous presence in foodstuff that effectively applied to treat the diseases and promote the animal growth worldwide. Chloramphenicol as one of the antibiotics with the broad action spectrum against Gram-positive and Gram-negative bacteria is widely applied for the effective treatment of infectious diseases in humans and animals. Unfortunately, the serious side effects of chloramphenicol, such as aplastic anemia, kidney damage, nausea, and diarrhea restrict its application in foodstuff and biomedical fields. Development of the sufficiently sensitive methods to detect chloramphenicol residues in food and clinical diagnosis seems to be an essential demand. Biosensors have been introduced as the promising tools to overcome the requirement. As one of the newest types of the biosensors, aptamer-based biosensors (aptasensors) are the efficient sensing platforms for the chloramphenicol monitoring. In the present review, we summarize the recent achievements of the accessible aptasensors for qualitative detection and quantitative determination of chloramphenicol as a candidate of the antibiotics. The present chloramphenicol aptasensors can be classified in two main optical and electrochemical categories. Also, the other formats of the aptasensing assays like the high performance liquid chromatography (HPLC) and microchip electrophoresis (MCE) have been reviewed. The enormous interest in utilizing the diverse nanomaterials is also highlighted in the fabrication of the chloramphenicol aptasensors. Finally, some results are presented based on the advantages and disadvantages of the studied aptasensors to achieve a promising perspective for designing the novel antibiotics test kits.

Cetylpyridinium chloride functionalized silica-coated magnetite microspheres for the solid-phase extraction and pre-concentration of ochratoxin A from environmental water samples with high-performance liquid chromatographic analysis

A new method based on cetylpyridinium chloride coated ferroferric oxide/silica magnetic microspheres as an efficient solid-phase adsorbent was developed for the extraction and enrichment of ochratoxin A. The determination of ochratoxin A was obtained by high-performance liquid chromatography with fluorescence detection. In the presence of cetylpyridinium chloride, the adsorption capacity of ferroferric oxide/silica microspheres was 5.95 mg/g for ochratoxin A. The experimental parameters were optimized, including the amounts of ferroferric oxide/silica microspheres (20 mg) and cetylpyridinium chloride (0.18 mL, 0.5 mg/mL), pH value of media (9), ultrasonic time (5 min), elution solvent and volume [2(1 + 1) mL (washed twice, 1 mL each time) 1% acetic acid acetonitrile]. Under optimal experiment conditions, ochratoxin A had good linearity in the range of 2.5-250.0 ng/L in water samples with correlation coefficient of the calibration curve 0.9995. The limit of detection for ochratoxin A was 0.83 ng/L, and the recoveries were 89.8-96.8% with the relative standard deviation of 1.5-3.5% in environmental water samples. Furthermore, ferroferric oxide/silica microspheres show excellent reusability during extraction procedures for no less than six times.

Insight into the Molecular Mechanisms of AuNP-Based Aptasensor for Colorimetric Detection: A Molecular Dynamics Approach

Colorimetric aptasensor based on assembly of salt-induced gold nanoparticles (AuNPs) is a promising biosensor. However, the molecular mechanism of the aptasensor is far from being fully understood. Herein, molecular dynamics (MD) simulation was used to investigate molecular interactions in the detection of ochratoxin A (OTA) including the following: (i) the molecular recognition of the anti-OTA aptamer, (ii) OTA-aptamer interactions in monovalent (Na⁺) and divalent (Mg²⁺) electrolytes, (iii) the binding mode of citrate on the AuNP surface, (iv) interactions of the aptamer with citrate-capped AuNPs, and (v) a detailed mechanism of the aptasensor. Our MD simulations revealed a specific binding of the OTA-aptamer complex, compared with OTB and warfarin. Compared with Na⁺, Mg²⁺ ions exerted a more effective attractive force between OTA and anti-OTA aptamer. Three different binding modes of citrate on AuNP surfaces were found. The kinetics of the adsorption of unfolded aptamers onto the citrate-capped AuNP was also elucidated. Most importantly, our MD simulation revealed an insightful analysis of the molecular mechanisms in the AuNP-based aptasensor and paved the way for the design of a novel colorimetric aptasensor for other target molecules, which is not limited to OTA detection.

Aptamer-based polyhedral oligomeric silsesquioxane (POSS)-containing hybrid affinity monolith prepared via a "one-pot" process for selective extraction of ochratoxin A

A novel aptamer-based polyhedral oligomeric silsesquioxane (POSS)-containing hybrid affinity monolith has been prepared with a facile "one-pot" process simultaneously via "free radical polymerization" and "thiol-ene" click reaction, and used for on-line selective extraction and practical analysis to trace ochratoxin A (OTA). By using the ternary porogenic mixture composed of water/DMF/PEG, a homogeneous polymerization mixture with POSS chemicals, acrylate-based monomers and aptamer aqueous solution was obtained, and the copolymerization of POSS chemicals, polymer monomers and aptamer aqueous solution was systematically studied. Characterizations such as the morphology, FT-IR and fluorescence spectra, mechanical stability, dynamic binding capacity, cross-reactivity and selectivity of the resultant affinity monolith were also evaluated. Attributed to the porous monolithic structure and aptamer-based affinity interaction, acceptable selective recognition and recovery yields towards trace OTA were obtained. With a 5-fold volume enrichment, the limit of detection (LOD) and limit of quantitation (LOQ) of OTA in fortified beer samples were gained at 0.025 ng/mL (S/N = 3) and 0.045 ng/mL (S/N = 10), respectively. It could be competent for the sensitive measure of actual OTA residues in real beer samples. In comparison with the previously reported strategies containing common "sol-gel" chemistry, the proposed protocol to fabricating aptamer-modified POSS-containing hybrid affinity monolith showed a simpler preparation with acceptable selectivity and higher recovery to trace OTA.

Designed Strategies for Fluorescence-Based Biosensors for the Detection of Mycotoxins

Small molecule toxins such as mycotoxins with low molecular weight are the most widely studied biological toxins. These biological toxins are responsible for food poisoning and have the potential to be used as biological warfare agents at the toxic dose. Due to the poisonous nature of mycotoxins, effective analysis techniques for quantifying their toxicity are indispensable. In this context, biosensors have been emerged as a powerful tool to monitors toxins at extremely low level. Recently, biosensors based on fluorescence detection have attained special interest with the incorporation of nanomaterials. This review paper will focus on the development of fluorescence-based biosensors for mycotoxin detection, with particular emphasis on their design as well as properties such as sensitivity and specificity. A number of these fluorescent biosensors have shown promising results in food samples for the detection of mycotoxins, suggesting their future potential for food applications.

Affinity Biosensors for Detection of Mycotoxins in Food

This chapter reviews recent achievements in methods of detection of mycotoxins in food. Special focus is on the biosensor technology that utilizes antibodies and nucleic acid aptamers as receptors. Development of biosensors is based on the immobilization of antibodies or aptamers onto various conventional supports like gold layer, but also on nanomaterials such as graphene oxide, carbon nanotubes, and quantum dots that provide an effective platform for achieving high sensitivity of detection using various physical methods, including electrochemical, mass sensitive, and optical. The biosensors developed so far demonstrate high sensitivity typically in subnanomolar limit of detection. Several biosensors have been validated in real samples. The sensitivity of biosensors is similar and, in some cases, even better than traditional analytical methods such as ELISA or chromatography. We believe that future trends will be focused on improving biosensor properties toward practical application in food industry.

Magnetically controlled fluorescence aptasensor for simultaneous determination of ochratoxin A and aflatoxin B1

Development of an efficient method for the simultaneous detection of two highly concerning mycotoxins, ochratoxin A (OTA) and aflatoxin B1 (AFB1), is of great significance on food safety monitoring. Herein, a magnetically controlled fluorescence aptasensor for simultaneous determination of OTA and AFB1 has been successfully developed. The working principle of the aptasensor is based on the specific aptamer-mycotoxin recognition and further leads to the partial release of two distinguishable fluorescence labels from the magnetic carriers. Through the magnetic separation, the reporter probes in the supernatant solution can be collected and converted into a sensitive fluorescence signal with dual emission peaks. This aptasensor provided a wide detection range of 2 pg mL^-1 - 5 ng mL^-1 for OTA and 5 pg mL^-1 - 10 ng mL^-1 for AFB1. The new easy-to-wash and simple-to-use approach offers a simultaneous and high selective detection with high sensitivity (limits of detection of 0.67 and 1.70 pg mL^-1 for OTA and AFB1, respectively). Remarkable accuracy (relative standard deviation < 5.6%) during the mycotoxins determination as well as excellent quantitative recoveries (95-108%) during the analysis of the spiked corn samples were also achieved. This simple aptasensing scheme provides a new avenue for high throughput screen of dual mycotoxins due to its simple manipulation, short assay times, high selectivity and sensitivity.

Chiral Shell Core-Satellite Nanostructures for Ultrasensitive Detection of Mycotoxin

Herein, the design of a DNA-based chiral biosensor is described utilizing the self-assembly of shell core-gold (Au) satellite nanostructures for the detection of mycotoxin, ochratoxin A (OTA). The assembly of core-satellite nanostructures based on OTA-aptamer binding exhibits a strong chiral signal with an intense circular dichroism (CD) peak. The integrity of the assembly of core-satellite nanostructures is limited to some extent in the presence of different levels of OTA. Correspondingly, the chiral intensity of assembly is weakened with increasing OTA concentrations, allowing quantitative determination of the target. The developed chiral sensor shows an excellent linear relationship between the CD signal and concentrations of OTA in the range of 0.1-5 pg mL^-1 with a limit of detection as low as 0.037 pg mL^-1 . The effectiveness of the biosensor in a sample of red wine is verified and a good recovery rate is obtained. These results suggest that the strategy has great potential for practical application.

DNA metallization: principles, methods, structures, and applications

This review summarizes the research activities on DNA metallization since the concept was first proposed in 1998, covering the principles, methods, structures, and applications.

One-step, visual and sensitive detection of phorate in blood based on a DNA–AgNC aptasensor

A one-step, visual and sensitive aptasensor based on DNA–AgNCs can be used to detect phorate in blood.

Advances, challenges and opportunities for point-of-need screening of mycotoxins in foods and feeds

Recent advances in analytical methods for mycotoxin screening in foods and feeds are reviewed, focusing on point-of-need detection using integrated devices.

Fluorometric aptamer assay for ochratoxin A based on the use of single walled carbon nanohorns and exonuclease III-aided amplification

The authors describe an aptamer based assay for the food mycotoxin ochratoxin A (OTA). It is based on the use of exonuclease III (Exo III) which assists in signal amplification, and of single-walled carbon nanohorns (SWCNHs) which act as quenchers of fluorescence. The detection scheme employs a hairpin probe (HP) and a signal probe (SP) labeled with carboxyfluorescein (FAM) at its 5'-end. The fluorescence of intact SPs (best measured at excitation/emission wavelengths of 495/518 nm) is quenched by SWCNHs. The HP contains the OTA-specific aptamer sequence and is partially complementary to the SP. After addition of OTA, the aptamer binds OTA and thus exposes a single-stranded sequence that can hybridize with the SP. Exo III digests the SP to liberate the free fluorophore labels. The damaged SPs no longer are adsorbed by the SWCNHs so that fluorescence is no longer quenched. The method has a detection range that is linear from 10 nM to 1000 nM (with a correlation coefficient of 0.997). The limit of detection (LOD), calculated on the basis of a signal to noise ratio of 3, is 4.2 nM. The procedure was validated by the quantitation of OTA in spiked real samples and were found to be free of interference by the sample matrix. Recoveries ranged from 93.8 to 113.0% in beer and from 92.0 to115.9% in red wine. Graphical abstract After adding ochratoxin A (OTA), the aptamer region in hairpin probe (HP) combined with OTA and thus exposed a single-stranded sequence to hybridize with signal probe (SP). Exonuclease III (Exo III) digested SP to liberate the free fluorophore (FAM).

Ultrasensitive detection of ochratoxin A using aptasensors

Regarding teratogenic, carcinogenic, and immunotoxic nature of ochratoxin A (OTA), selective and sensitive monitoring of this molecule in food samples is of great importance. In recent years, various methods have been introduced for detection of OTA. However, they are usually time-consuming, labor-intensive and expensive. Therefore, these parameters limited their usage. The emerging method of detection, aptasensor, has attracted more attention for OTA detection, due to distinctive advantages including high sensitivity, selectivity and simplicity. In this review, the new developed aptasensors for detection of OTA have been investigated. We also highlighted advantages and disadvantages of different types of OTA aptasensors. This review also takes into consideration the goal to find out which designs are the most rational ones for highly sensitive detection of OTA.

Estimation of postmortem interval by vitreous potassium evaluation with a novel fluorescence aptasensor

Estimation of postmortem interval (PMI) is a central role in medico-legal identification. Analysis of vitreous potassium ions (K⁺) concentration is frequently used by forensic workers to estimate PMI. This paper describes interdisciplinary research to introduce fluorescence sensing techniques into forensic medicine. On the basis of silver nanoclusters (AgNCs) probe stabilized by DNA, a simple and highly sensitive fluorescence aptasensor has been proposed to selectively detect K⁺ ions. The linear range for K⁺ ions was found to be 0.1 nM-1 mM, with limit of detection of 0.06 nM. Moreover, 63 vitreous humour cases within 36 h after death were further studied to verify the utility of K⁺ ions in estimating the PMI. By the fluorescence aptasensor method, a new formula was built to determine the postmortem interval based on K⁺ ions concentration: PMI(h) = −0.55 + 1.66 × C_K⁺(r = 0.791). And the real significance of this research was demonstrated by additional 6 cases with known PMIs. In comparison with the conventional method, the presented aptasensor strategy is cost-effective and easy in measuring vitreous K⁺, which may be potentially a better way for estimation of PMI in medico-legal practice.

Highly-sensitive aptasensor based on fluorescence resonance energy transfer between l-cysteine capped ZnS quantum dots and graphene oxide sheets for the determination of edifenphos fungicide

With the advantages of excellent optical properties and biocompatibility, single-strand DNA-functionalized quantum dots have been widely applied in biosensing and bioimaging. A new aptasensor with easy operation, high sensitivity, and high selectivity was developed by immobilizing the aptamer on water soluble l-cysteine capped ZnS quantum dots (QDs). Graphene oxide (GO) sheets are mixed with the aptamer-QDs. Consequently, the aptamer-conjugated QDs bind to the GO sheets to form a GO/aptamer-QDs ensemble. This aptasensor enables the energy transfer based on a fluorescence resonance energy transfer (FRET) from the QDs to the GO sheets, quenching the fluorescence of QDs. The GO/aptamer-QDs ensemble assay acts as a "turn-on'' fluorescent sensor for edifenphos (EDI) detection. When GO was replaced by EDI, the fluorescence of QDs was restored and its intensity was proportional to the EDI concentration. This GO-based aptasensor under the optimum conditions exhibited excellent analytical performance for EDI determination, ranging from 5×10^-4 to 6×10^-3mg L^-1 with the detection limit of 1.3×10^-4mgL^-1. Furthermore, the designed aptasensor exhibited excellent selectivity toward EDI compared to other pesticides and herbicides with similar structures such as diazinon, heptachlor, endrin, dieldrin, butachlor and chlordane. Good reproducibility and precision (RSD =3.9%, n =10) of the assay indicates the high potential of the aptasensor for quantitative trace analysis of EDI. Moreover, the results demonstrate the applicability of the aptasensor for monitoring EDI fungicide in spiked real samples.

Aptamer-based environmental biosensors for small molecule contaminants

Aptasensors are promising biosensors, which take advantage of using aptamers as a recognition element. The combination of the excellent characteristics of aptamers and the leading detection platform techniques, such as optical, electrochemical with nanomaterial-integrated, or mass-sensitive techniques with high sensitivity and specificity draws a promising view for the application of the aptasensors for the detection of harmful small toxic chemicals and real-time monitoring in the environments. In spite of attraction of aptasensors, application of them is limited to the complex environment due to the facts that how the immobilization of aptamers onto the surface affects the functions of aptamers and their structures for the detection of environmental contaminants are not clearly known. This review examines the most recent update on the selection of aptamers for small molecules, the development and application of aptasensors in the detection of small molecule contaminants in environment. Additionally, their applications to the real samples as environmental monitoring reported in the publications also are reviewed.