Dithiothreitol-capped fluorescent gold nanoclusters: An efficient probe for detection of copper(II) ions in aqueous solution

Dual-emissive solid-state histidine-stabilized gold nanoclusters for applications in white-light generation

The majority of present-day white-light emitting devices (WLEDs) are built upon the use of rare-earth elements, which have a short supply, are expensive and can become extremely toxic. Thus, in this work, we synthesized an eco-friendly, efficient and cheap white-light emitting material (WLEM) based on solid-state histidine-stabilized gold nanoclusters (His-AuNCs), obtained through the lyophilization of microwave-synthesized photoluminescent His-AuNCs. Their morphological and structural characterization was followed by thorough evaluation of their intrinsic solid-state photoluminescence properties via steady-state and time-resolved fluorescence spectroscopy and microscopy, at multiple excitation wavelengths. A white-light emission was observed under UV light excitation due to the two-band broad emission, with maxima at 475 and 520 nm, covering a large area of the visible spectrum. In order to evaluate the purity of the white-light emission we calculated the chromaticity coordinates, at different wavelengths, and displayed them on a CIE (Commision Internationale d'Eclairage) diagram. An excellent value of (0.36, 0.33) was found at 420 nm excitation, which falls within the range of pure white-light emission. Moreover, the His-AuNCs show great photo- and thermo-stability, thus proving their ability to perform as a reliable WLEM with potential use in the development of eco-friendly WLEDs.

A facile aptamer-based sensing strategy for dopamine detection through the fluorescence energy transfer between dye and single-wall carbon nanohorns

Dopamine (DBA) as an important biomarker, plays a crucial role in disease diagnosis. In this study, we have developed a fast and simple aptamer-based fluorescence strategy which used single-wall carbon nanohorns (SWCNHs) as a quencher for dopamine detection. SWCNHs were negatively charged after pretreated, which improved its dispersion in solution. 5-carboxy-fluorescein (FAM) was used to label dopamine aptamer. In the absence of dopamine, FAM-modified aptamer could be absorbed onto the SWCNHs surface due to π-π interaction, resulting in the fluorescence intensity decreased. Dopamine could specifically bind with FAM-DNA to form G-quadruplex, which could not be absorbed onto the surface of SWCNHs. Hence, the fluorescence of FAM-DNA recovered, and the fluorescent intensity as a function of different concentrations of dopamine was measured. We obtained a detection limit of 5 μM for this detection system with a linear detection range of 0.02-2.20 mM. Furthermore, the feasibility of the innovative detection system has been verified by detecting dopamine in spiked serum samples.

Green synthesis of pregabalin-stabilized gold nanoclusters and their applications in sensing and drug release

This is the first report on the simple preparation of gold nanoclusters stabilized with pregabalin (PREG) as a capping and reducing agent. PREG is an active pharmaceutical ingredient of the commercially available drug "Lyrica" used to treat different diseases like epilepsy and anxiety. PREG has never been used before in the synthesis of any nanoparticles or nanoclusters. The prepared gold nanoclusters (PREG-stabilized gold nanoclusters [PREG-AuNCs]) have blue fluorescence with excitation/emission at 365/425 nm, respectively. The reaction conditions were optimized for the synthesis of the as-prepared AuNCs. Different tools were used for the characterization of the synthesized nanoclusters in terms of size and surface properties. The PREG-AuNCs were exploited as a sensitive and selective fluorescent nanosensor for Cu²⁺ detection. The quenching of AuNC fluorescence intensity in the presence of Cu²⁺ is due to the aggregation-induced fluorescence quenching mechanism. The detection limit of Cu²⁺ ions was found to be 1.11 × 10^-7 M. The selectivity of the PREG-AuNCs was studied and proved to be excellent. The drug entrapment efficacy and in vitro drug diffusion studies along with drug release kinetics helped to understand more about the pharmaceutical approaches of PREG-AuNCs. Moreover, we think that PREG-AuNCs open new opportunities as a promising candidate material for drug delivery systems and medical applications.

Fluorescent and colorimetric assay for determination of Cu(II) and Hg(II) using AuNPs reduced and wrapped by carbon dots

To improve the accuracy and specificity of visual sensors for detecting Cu(II) and Hg(II), a fluorescent and colorimetric dual-modal sensor based on Au nanoparticles (AuNPs) prepared by using carbon dots (CDs) was designed. If a sensor is to be applied for the detection of targets in different environmental backgrounds, it needs to have high stability against heat, pH, and salt. To this end, CD-wrapped AuNP probes were fabricated by the in situ reaction of chloroauric acid and reductive CDs. The reductive CDs were prepared with hyperbranched polyethyleneimine (HPEI) as a carbon source. HPEI-CDs not only acted as a reducing agent but also as an excellent stabilizer in the preparation and detection application of the AuNPs. Based on multiple signal responses, including color, UV-Vis absorption, and fluorescence intensity, the HPEI-CD/AuNP nanosensor was used to realize the detection of Cu²⁺ and Hg²⁺ in the linear range 9.0×10^-10-9.0×10^-4 M and 9.0×10^-7-9.0×10^-5 M with low detection limits of 75.6 nM and 281 nM, respectively. In tap water analysis, the recovery of Cu²⁺ and Hg²⁺ by fluorescent range from 109.98-113.31% and 100.65-100.81%, and the RSD values were 0.1159-1.6317% and 3.2-5.4%, respectively. The recovery of Cu²⁺ and Hg²⁺ by colorimetric detection were 99.72-100.14% and 99.88-100.12%, and RSD values were 0.6527-0.6842% and 0.4400-0.8386%, respectively. Importantly, this sensor was applied to the accurate and sensitive detection of Cu²⁺ and Hg²⁺ in tap water and sea water. The multimode readout nanosensor exhibited strong potential for achieving simultaneous detection of two different heavy metal ions in practical applications. The novel multi-mode readout carbon dots/AuNPs sensor for Cu²⁺ and Hg²⁺ detectionshowed high sensitivity and selectivity.

Intrinsic Photoluminescence of Solid-State Gold Nanoclusters: Towards Fluorescence Lifetime Imaging of Tissue-Like Phantoms Under Two-Photon Near-Infrared Excitation

Gold nanoclusters (AuNCs) have attracted extensive attention as light-emissive materials with unique advantages such as high photostability, large Stoke shifts and low toxicity. However, a better understanding of their solid-state photoluminescence properties is still needed. Herein, we investigated for the first time the intrinsic photoluminescence properties of lyophilized bovine serum albumin stabilized AuNCs (BSA-AuNCs) via fluorescence lifetime imaging microscopy (FLIM) studies performed under both one and two photon excitations (OPE and TPE) on individual microflakes, combined with fluorescence spectroscopic investigations. Both in solution and solid-state, the synthesized BSA-AuNCs exhibit photoluminescence in the first biological window with an absolute quantum yield of 6% and high photostability under continuous irradiation. Moreover, under both OPE and TPE conditions, solid BSA-AuNCs samples exhibited a low degree of photobleaching, while FLIM assays prove the homogeneous distribution of the photoluminescence signal inside the microflakes. Finally, we demonstrate the ability of BSA-AuNCs to perform as reliable bright and photostable contrast agents for the visualization of cancer tissue mimicking agarose-phantoms using FLIM approach under non-invasive TPE. Therefore, our results emphasize the great potential of the as synthesized BSA-AuNCs for ex vivo and in vivo non-invasive NIR imaging applications.

Anchoring zinc-doped carbon dots on a paper-based chip for highly sensitive fluorescence detection of copper ions

In this work, zinc-doped carbon dots (Zn-CDs) were anchored on a three-dimensional wheel type paper-based microfluidic chip, and were decorated with 6-mercaptonicotinic acid (MNA) and L-cysteine (L-Cys) for highly sensitive and rapid fluorescence detection of Cu²⁺. Zn-CDs were first anchored on paper through the amide bonds between the carboxyl groups of the Zn-CDs and the amino groups of the paper. Afterwards, Zn-CDs were decorated with MNA and L-Cys, effectively preventing the Zn-CDs from aggregation. The nitrogen atom on the pyridine ring and the carboxylic acid groups in MNA and L-Cys coordinated with Cu²⁺ to form a nonfluorescent ground-state complex, causing the fluorescence quenching of the Zn-CDs. The three-dimensional rotary design could simplify the operation process and achieve simultaneous analysis of multiple samples with different concentrations. Under optimal conditions, the fluorescent sensor exhibits linear response for the determination of Cu²⁺ in the range from 0.1 to 60 μg L^-1 with the detection limit (LOD) of 0.018 μg L^-1. The proposed strategy provides a novel way for the highly sensitive detection of Cu²⁺ in a complex water environment.

Gold nanoclusters: An ultrasmall platform for multifaceted applications

Gold nanoclusters (Au NCs) with a core size below 2 nm form an exciting class of functional nano-materials with characteristic physical and chemical properties. The properties of Au NCs are more prominent and extremely different from their bulk counterparts. The synthesis of Au NCs is generally assisted by template or ligand, which impart excellent cluster stability and high quantum yield. The tunable and sensitive physicochemical properties of Au NCs open horizons for their advanced applications in various interdisciplinary fields. In this review, we briefly summarize the solution phase synthesis and origin of the characteristic properties of Au NCs. A vast review of recent research work introducing biosensors based on Au NCs has been presented along with their specifications and detection limits. This review also highlights recent progress in the use of Au NCs as bio-imaging probe, enzyme mimic, temperature sensing probe and catalysts. A speculation on present challenges and certain future prospects have also been provided to enlighten the path for advancement of multifaceted applications of Au NCs.

The development of an endoplasmic reticulum-targeting fluorescent probe for the imaging of 1,4-dithiothreitol (DTT) in living cells

1,4-Dithiothreitol (DTT) is a robust reducing agent that contributes significantly to the folding process of proteins and maintaining endoplasmic reticulum (ER) homeostasis. Abnormally high levels of DTT can lead to severe endoplasmic reticulum stress (ERS), which induces cell death. In addition, DTT can also hinder cell growth and enhance reactive oxygen species (ROS) production in the ER. Herein, an effective turn-on ER-targeting fluorescent probe, ER-DTT, was designed to image DTT for the first time. The probe ER-DTT was based upon naphthalimide as a fluorophore, p-toluenesulfonamide as an exceptional unit for ER-targeting, and sulfoxide as a response site for imaging DTT based on an intramolecular charge transfer (ICT) mechanism. Optical-response experiments showed that the probe ER-DTT had good selectivity and sensitivity for DTT. Furthermore, confocal microscopy indicated that ER-DTT was suitable for selectively targeting ER in living cells and could be implemented to recognize cellular DTT.

Nanotheranostic Application of Fluorescent Protein-Gold Nanocluster Hybrid Materials: A Mini-review

The gold nanoclusters (Au NCs) are a special kind of gold nanomaterial containing several gold atoms. Because of their small size and large surface area, Au NCs possess macroscopic quantum tunneling and dielectric domain effects. Furthermore, Au NCs fluorescent materials have longer luminous time and better photobleaching resistance compared with other fluorescent materials. The synthetic process of traditional Au NCs is complicated. Traditional Au NCs are prepared mainly by using polyamide amine type dendrites, and sixteen alkyl trimethylamine bromide or sulfhydryl small molecule as stabilizers. They are consequently synthesized by the reduction of strong reducing agents such as sodium borohydride. Notably, these materials are toxic and environmental-unfriendly. Therefore, there is an urgent need to develop more effective methods for synthesizing Au NCs via a green approach. On the other hand, the self-assembly of protein gold cluster-based materials, and their biomedical applications have become research hotspots in this field. We have been working on the synthesis, assembly and application of protein conjugated gold clusters for a long time. In this review, the synthesis and assembly of protein-gold nanoclusters and their usage in cell imaging and other medical research are discussed.

Peptide-Engineered Fluorescent Nanomaterials: Structure Design, Function Tailoring, and Biomedical Applications

Fluorescent nanomaterials have exhibited promising applications in biomedical and tissue engineering fields. To improve the properties and expand bioapplications of fluorescent nanomaterials, various functionalization and biomodification strategies have been utilized to engineer the structure and function of fluorescent nanomaterials. Due to their high biocompatibility, satisfied bioactivity, unique biomimetic function, easy structural tailoring, and controlled self-assembly ability, supramolecular peptides are widely used as versatile modification agents and nanoscale building blocks for engineering fluorescent nanomaterials. In this work, recent advance in the synthesis, structure, function, and biomedical applications of peptide-engineered fluorescent nanomaterials is presented. Firstly, the types of different fluorescent nanomaterials are introduced. Then, potential strategies for the preparation of peptide-engineered fluorescent nanomaterials via templated synthesis, bioinspired conjugation, and peptide assembly-assisted synthesis are discussed. After that, the unique structure and functions through the peptide conjugation with fluorescent nanomaterials are demonstrated. Finally, the biomedical applications of peptide-engineered fluorescent nanomaterials in bioimaging, disease diagnostics and therapy, drug delivery, tissue engineering, antimicrobial test, and biosensing are presented and discussed in detail. It is helpful for readers to understand the peptide-based conjugation and bioinspired synthesis of fluorescent nanomaterials, and to design and synthesize novel hybrid bionanomaterials with special structures and improved functions for advanced applications.

In situ creation of ZnO@CdS nanoflowers on ITO electrodes for sensitive photoelectrochemical detection of copper ions in blood

A highly selective and sensitive photoelectrochemical (PEC) detection method has been developed for the analysis of copper (Cu2+) ions using nanoflower-like ZnO@CdS heterojunctions, of which ZnO was first in situ grown onto the indium tin oxide electrodes by a hydrothermal method and then coated with CdS through the chemical bath deposition route. It was discovered that the ZnO@CdS heterojunction so formed could serve as a photosensitive catalyst with improved charge separation for visible-light-driven PEC responses. Enhanced visible-light harvesting of nanocomposites could also be expected with CdS as the visible-light sensitizer. Furthermore, the introduction of Cu2+ ions could cause a rational decrease in the photocurrents of nanocomposites through the specific interaction between CdS and Cu2+ ions. A ZnO@CdS heterojunction-based PEC sensor was thereby developed for the detection of Cu2+ ions in blood in the linear concentrations ranging from 0.50 to 80 nM, with a limit of detection of 0.18 nM. Such a heterojunction-based PEC detection platform constructed using two photocatalytic materials with matched band structures are promising for a wide range of applications for sensing Cu2+ ions in clinical diagnostics, food monitoring, and environmental analysis.

Sensitive and selective assay of uranyl based on the aggregation induced fluorescent quenching of protamine capped gold nanoclusters

The protamine capped gold nanoclusters (AuNCs@PRT) were synthesized by an one-pot approach, and utilized as a nanoprobe for highly sensitive and selective assay of U(VI) ions. The method is based on the aggregation induced fluorescent quenching of AuNCs@PRT by U(VI) ions. Under optimum conditions, the decrease of fluorescence intensity displayed a good linear correlation with the concentration of U(VI) ions ranging from 20.4 nM to 9.74 μM, with a detection limit of 6.1 nM. The relative standard deviations were 3.86%, 1.41% and 1.71% via 11 detections at concentrations of 40 nM, 0.40 μM and 4.0 μM of U(VI), respectively. The quenching mechanism was demonstrated to be due to the binding of U(VI) towards PRT to cause the aggregation of AuNCs@PRT rather than metal-metal interaction. The results suggest the potential application of this approach for monitoring the level of U(VI) in environmental samples.

Embedding carbon dots and gold nanoclusters in metal-organic frameworks for ratiometric fluorescence detection of Cu2

Herein, a dual-emission metal-organic framework based ratiometric fluorescence nanoprobe was reported for detecting copper(II) ions. In particular, carbon dots (CDs) and gold nanoclusters (AuNCs) were embedded into ZIF-8 (one of the classical metal-organic frameworks) to form CDs/AuNCs@ZIF-8 nanocomposites, which exhibited dual-emission peaks at UV excitation. In the presence of Cu²⁺, the fluorescence attributed to AuNCs can be rapidly quenched, while the fluorescence of CDs serves as reference with undetectable changes. Therefore, the CDs/AuNCs@ZIF-8 nanocomposites were utilized as a ratiometric fluorescence nanoprobe for sensitive and selective detection of Cu²⁺. A good linear relationship between the ratiometric fluorescence signal of CDs/AuNCs@ZIF-8 and Cu²⁺ concentration was obtained in the range of 10^-3-10³ μM, and the detection limit was as low as 0.3324 nM. The current ratiometric fluorescence nanoprobe showed promising prospects in cost-effective and rapid determination of Cu²⁺ ions with good sensitivity and selectivity. Furthermore, this nanoprobe has been successfully applied for the quantitative detection of Cu²⁺ in serum samples, indicating its value of practical application. Graphical abstract Carbon dots (CDs) and gold nanoclusters (AuNCs) were embedded into metal-organic frameworks (ZIF-8) to form CDs/AuNCs@ZIF-8 nanocomposites, which exhibited dual-emission peaks at 365 nm excitation. In the presence of Cu²⁺, the fluorescence emission peak at 574 nm can rapidly respond by quenching, while the fluorescence at 462 nm serves as reference with undetectable changes.

An aptasensor for the label-free detection of thrombin based on turn-on fluorescent DNA-templated Cu/Ag nanoclusters

A highly sensitive thrombin aptasensor was constructed based on the alteration of the aptamer conformation induced by the target recognition and the turn-on fluorescence due to the proximity of two darkish DNA-templated copper/silver nanoclusters (DNA-Cu/Ag NCs). Two DNA templates were designed as the functional structures consisting of the Cu/Ag NC-nucleation segment located at two termini or one terminus and the aptamer segment in the middle of a DNA template. Two darkish DNA-Cu/Ag NCs came close to each other when the aptamer combined with the target due to the conformational alteration of the aptamer structure, resulting in an increased fluorescence signal readout. Thrombin was sensitively determined as low as 1.6 nM in the range of 1.6–8.0 nM with a high selectivity. Finally, this sensor succeeded in detecting thrombin in a real fetal bovine serum.

A highly sensitive thrombin aptasensor was constructed based on the alteration of the aptamer conformation induced by the target recognition and the turn-on fluorescence due to the proximity of two darkish DNA-templated copper/silver nanoclusters (DNA-Cu/Ag NCs).

The synthesis of metal nanoclusters and their applications in bio-sensing and imaging

Noble metal nanomaterials have been studied by many researchers for their ultra-small size, excellent photophysical properties and good biocompatibility. Metal nanoclusters are a kind of nanoscale ultrafine particle, which have completely different properties from macroscopic metals. In the visible region, they do not usually show the characteristic surface plasmon resonance absorption but instead show fluorescence in the visible to near infrared region. In particular, the noble metallic (Au, Ag, Cu, etc) nanoclusters (NMNCs) have broad application prospects in the field of biomedicine as probes for fluorescence sensing. Their strong photoluminescence, living cell compatibility, and easy availability make up for the shortcomings of traditional fluorescent probes such as organic fluorescent dyes, fluorescent proteins, and fluorescent quantum dots. In this review, we summarize the synthetic method and application of metal nanoclusters as fluorescent probes in bio-sensing and imaging, especially in the early diagnosis of cancer cells.

Design and synthesis of a vanadate-based ratiometric fluorescent probe for sequential recognition of Cu2+ ions and biothiols

YVO₄:Eu³⁺@CDs core–shell nanomaterial was synthesized through a simple self-assembly of carbon dots (CDs) with YVO₄:Eu³⁺, since the high affinity of oxygen-containing groups such as –COOH or –OH of CDs to the metal ions on the surface of YVO₄:Eu³⁺.

Fabrication of cefotaxime sodium-functionalized gold nanoclusters for the detection of copper ions in Chinese herbal medicines

Antibiotic-based gold nanoclusters (AuNCs) are a good sensing platform for specific recognition; however, the related studies are few. Herein, a simple and facile strategy was proposed for the fabrication of bright blue fluorescent AuNCs through the degradation product (DCTX) of cefotaxime sodium that induced the reduction of HAuCl₄. Various analytical techniques were applied to characterize the prepared AuNCs@DCTX. AuNCs@DCTX exhibited a strong emission peak centered at 420 nm and a quantum yield of 11.8%. Furthermore, an aggregation-induced fluorescence quenching mode endowed the AuNCs@DCTX probe with good specificity and sensitivity for Cu²⁺ detection. The proposed probe had a linear range of 0.01–40 μM, a precision with a relative standard deviation of 1.2% (n = 8), and a detection limit of 8 nM (signal/noise = 3). Interestingly, the probe could be reused through switching the “off” and “on” states by the addition of Cu²⁺ and EDTA. The practicality of the sensing platform was investigated for the determination of Cu²⁺ in four Chinese herbal medicines (CHMs), and the results were in accordance with those obtained by the FAAS method. This study has provided an alternate way for the fabrication of thiolate-protected AuNCs for sensing applications.

Antibiotic-based gold nanoclusters (AuNCs) are a good sensing platform for specific recognition; however, the related studies are few.

Strong red-emitting gold nanoclusters protected by glutathione S-transferase

Glutathione S-transferase (GST) is distributed widely in tissues and has been proven to be vital in the body. For example, it catalyzes reduced glutathione (GSH) to a variety of electrophilic substances and thus protects cells against many toxic chemicals. Therefore, GST-related investigations have always been significant for medical and/or life sciences. In the present study, a new material of gold nanoclusters (Au-NCs) protected by GST, Au-NCs@GST, was fabricated via an improved one-step heating method. The products were fully characterized by X-ray photoelectron spectroscopy (XPS), transmission electron microscopy (TEM), matrix-assisted laser desorption/ionization time of flight mass spectrometry (MALDI-TOF MS), and Fourier transform infrared (FT-IR) and circular dichroism (CD) spectra. The results confirmed that around 10 gold atoms are encapsulated in one intact GST, forming Au-NCs@GST with strong (QY = 13.5%) red emission at 670 nm. Therefore, a new nanomaterial possessing both strong luminescence and bio-functions of GST was developed, and it has great potential in GST-related investigations. To prove the concept, Au-NCs@GST was successfully applied to detect metronidazole (MNZ) both in solution and in living cells. Therefore, in the present study, we report not only a new nanomaterial of Au-NCs@GST but also a feasible fluorescence probe for antibiotic detection. Both the improved synthetic method and the design concept can be extended to the fabrication of other kinds of metal nanoclusters using different functional proteins for various purposes.

Cytidine-stabilized copper nanoclusters as a fluorescent probe for sensing of copper ions and hemin

We reported a sensitive and selective fluorescence “turn on–off” strategy for detection of Cu²⁺ and hemin, respectively. The fluorescence “turn on” sensor for Cu²⁺ detection had a wide linear range of 0.05–2.0 μM with a limit of detection (LOD) of 0.032 μM, and the fluorescence “turn off” sensor for hemin detection possessed a wide linear range of 0.05–4.0 μM with an LOD of 0.045 μM. The sensor for Cu²⁺ or hemin exhibited high selectivity over other possible substances. In addition, it was demonstrated by using various analytical characterization techniques that the fluorescence “turn on” sensor for Cu²⁺ was constructed on the basis of the formation of water-soluble fluorescent copper nanoclusters (CuNCs), and the fabrication of the fluorescence “turn off” sensor for hemin was predominately based on the inner filter effect of hemin on the fluorescence of the CuNCs. Finally, the proposed fluorescence “turn on–off” sensor system was successfully applied for detection of Cu²⁺ in lake water samples and hemin in duck blood samples.

A sensitive and selective fluorescence “turn on–off” strategy for simultaneous detection of Cu²⁺ and hemin was proposed on the basis of the formation of fluorescent CuNCs and the inner filter effect of hemin on the fluorescence of the CuNCs.

Colorimetric assay of copper ions based on the inhibition of peroxidase-like activity of MoS2 nanosheets

The peroxidase-like catalytic activity of MoS₂ nanomaterials has been utilized for colorimetric bioassays and medical diagnostics. However, the application of peroxidase-like catalytic activity of MoS₂ nanomaterials in environmental analysis was seldom explored. Herein, copper ions were found to inhibit the peroxidase-like catalytic activity of MoS₂ nanosheets, which can catalyze the oxidation of 3, 3', 5, 5'-tetramethylbenzidine by H₂O₂ to produce a colorimetric product. Based on this finding, a simple sensitive colorimetric method for the detection of copper ions was developed. In the presence of copper ions, the absorbance and color of the solution decreased with the increasing concentration of copper ions. The color of the solution can be used to semi-quantitative on-site assay of copper ions by naked eyes. A linear relationship between the absorbance and the concentration of copper ions was observed in the range of 0.4-4.0μmolL^-1 with a detection limit of 92nmolL^-1, which was much lower than the maximum contaminant level of copper in drinking water legislated by the Environmental Protection Agency of USA and the World Health Organization. The method was applied to detect copper ions in environmental water samples with satisfactory results.

Thermally prepared ultrabright adenosine monophosphate capped gold nanoclusters and the intrinsic mechanism

AMP capped gold nanoclusters, AuNC@AMP, have been prepared in a fast and cost-effective manner by using the heating and citrate reduction procedure, and have been found to show a strong and stable luminescence emission at 480 nm with a high quantum yield (QY, 14.52%).

Ultrasensitive electrochemical DNA biosensor based on functionalized gold clusters/graphene nanohybrids coupling with exonuclease III-aided cascade target recycling

In this work, a novel and ultrasensitive electrochemical biosensor was constructed for DNA detection based on functionalized gold clusters/graphene nanohybrids (AuNCs/GR nanobybrids) and exonuclease III (Exo III)-aided cascade target recycling. By utilizing the capacity of GR as universal template, different metal nanoclusters including AuNCs/GR nanobybrids and PtNCs/GR nanohybrids were synthesized through convenient ultrasonic method. Exo III-aided cascade recycling was initiated by target DNA, generating the final cleavage product (S2), which acted as a linkage between capture probe and the functionalized metal nanoclusters/GR conjugates in the construction of the biosensor. The AuNCs/GR-DNA-enzyme conjugates acted as interfaces of enzyme-catalyzed silver deposition reaction, achieving DNA detection ranging from 0.02 fM to 20 pM with a detection limit of 0.057 fM. In addition, PtNCs/GR-DNA conjugates presented peroxidase-like activity and the functionalized PtNCs/GR nanohybrids-based electrochemical biosensor also realized DNA detection by catalyzing the 3,3',5,5'-tetramethylbenzidine-hydrogen peroxide (TMB-H₂O₂) system to produce electrochemical signal. This metal clusters/GR-based multiple-amplified electrochemical biosensor provided an universal method for DNA detection.

A “turn-off” fluorescent sensor for the selective and sensitive detection of copper(ii) ions using lysozyme stabilized gold nanoclusters

In this contribution, we have developed a simple, environmentally friendly fluorescent turn-off sensor for the detection of copper (Cu²⁺) ions in aqueous solution by using lysozyme stabilized gold nanoclusters (Lys-AuNCs) as a fluorescent probe.

Immobilization of gold nanoclusters inside porous electrospun fibers for selective detection of Cu(II): A strategic approach to shielding pristine performance

Here, a distinct demonstration of highly sensitive and selective detection of copper (Cu²⁺) in a vastly porous cellulose acetate fibers (pCAF) has been carried out using dithiothreitol capped gold nanocluster (DTT.AuNC) as fluorescent probe. A careful optimization of all potential factors affecting the performance of the probe for effective detection of Cu²⁺ were studied and the resultant sensor strip exhibiting unique features including high stability, retained parent fluorescence nature and reproducibility. The visual colorimetric detection of Cu²⁺ in water, presenting the selective sensing performance towards Cu²⁺ ions over Zn²⁺, Cd²⁺ and Hg²⁺ under UV light in naked eye, contrast to other metal ions that didn’t significantly produce such a change. The comparative sensing performance of DTT.AuNC@pCAF, keeping the nonporous CA fiber (DTT.AuNC@nCAF) as a support matrix has been demonstrated. The resulting weak response of DTT.AuNC@nCAF denotes the lack of ligand protection leading to the poor coordination ability with Cu²⁺. The determined detection limit (50 ppb) is far lower than the maximum level of Cu²⁺ in drinking water (1.3 ppm) set by U.S. Environmental Protection Agency (EPA). An interesting find from this study has been the specific oxidation nature between Cu²⁺ and DTT.AuNC, offering solid evidence for selective sensors.