Turn-on fluorescence sensor for the detection of heparin based on rhodamine B-modified polyethyleneimine–graphene oxide complex

A novel graphene oxide-based fluorescence method for detection of urine glycosaminoglycans

Glycosaminoglycans (GAGs) serve as a biomarker for mucopolysaccharidoses disease. In this study, a novel fluorometric method was developed to measure total GAGs in urine. Graphene oxide (GO) and rhodamine B (RhB), a cationic fluorescent dye, were employed in the development of the method. RhB attaches to the GO surface via electrostatic attraction, leading to the quenching of its fluorescence upon the establishment of the RhB-GO complex. However, the presence of GAGs prompts a resurgence of intense fluorescence. The linear range of the method is between 5.00 and 70.00 mg/L. The total GAG levels of urine samples analyzed using the method agree with the results of the biochemistry analysis laboratory (65.85 and 79.18 mg/L; 73.30 ± 1.76 and 72.21 ± 2.21). The method is simple, accurate, and sensitive and may be used for both first-step diagnosis of the mucopolysaccharidoses and detection of individual GAGs for studies of GAG-related research and other biological applications.

PEI-based functional materials: Fabrication techniques, properties, and biomedical applications

Cationic polymers have recently attracted considerable interest as research breakthroughs for various industrial and biomedical applications. They are particularly interesting due to their highly positive charges, acceptable physicochemical properties, and ability to undergo further modifications, making them attractive candidates for biomedical applications. Polyethyleneimines (PEIs), as the most extensively utilized polymers, are one of the valuable and prominent classes of polycations. Owing to their flexible polymeric chains, broad molecular weight (MW) distribution, and repetitive structural units, their customization for functional composites is more feasible. The specific beneficial attributes of PEIs could be introduced by purposeful functionalization or modification, long service life, biocompatibility, and distinct geometry. Therefore, PEIs have significant potential in biotechnology, medicine, and bioscience. In this review, we present the advances in PEI-based nanomaterials, their transfection efficiency, and their toxicity over the past few years. Furthermore, the potential and suitability of PEIs for various applications are highlighted and discussed in detail. This review aims to inspire readers to investigate innovative approaches for the design and development of next-generation PEI-based nanomaterials possessing cutting-edge functionalities and appealing characteristics.

Size-Tunable Nanoregulator-Based Radiofrequency Ablation Suppresses MDSCs and Their Compensatory Immune Evasion in Hepatocellular Carcinoma

Radiofrequency ablation (RFA) is a widely used therapy for hepatocellular carcinoma (HCC). However, in cases of insufficient RFA (iRFA), nonlethal temperatures in the transition zone increase the risk of postoperative relapse. The pathological analysis of HCC tissues shows that iRFA-induced upregulation of myeloid-derived suppressor cells (MDSCs) in residual tumors is critical for postoperative recurrence. Furthermore, this study demonstrates, for the first time, that combining MDSCs suppression strategy during iRFA can unexpectedly lead to a compensatory increase in PD-L1 expression on the residual MDSCs, attributed to relapse due to immune evasion. To address this issue, a novel size-tunable hybrid nano-microliposome is designed to co-deliver MDSCs inhibitors (IPI549) and αPDL1 antibodies (LPIP) for multipathway activation of immune responses. The LPIP is triggered to release immune regulators by the mild heat in the transition zone of iRFA, selectively inhibiting MDSCs and blocking the compensatory upregulation of PD-L1 on surviving MDSCs. The combined strategy of LPIP + iRFA effectively ablates the primary tumor by activating immune responses in the transition zone while suppressing the compensatory immune evasion of surviving MDSCs. This approach avoids the relapse of the residual tumor in a post-iRFA incomplete ablation model and appears to be a promising strategy in RFA for the eradication of HCC.

Autonomic self-regulating systems based on polyelectrolyte microcapsules and microgel particles

Biological systems possess unique non-equilibrium functions, maintaining tight manipulation of their surroundings through inter-communication of multiple components and self-regulatory capability organized over different length scales. However, most artificial materials are incapable of communicating and self-regulating behavior due to their limited number of component and direct responsive modes. Herein, a new integrated self-regulation system is developed utilizing stimuli-responsive polyelectrolyte capsules as building blocks. The combination of stimuli-responsive capsules and enzyme immobilized microgels is designed to mimic life systems and its programmable interactive communications and self-regulation behavior is demonstrated through communication-feedback mechanism. Polyelectrolyte capsules can sense changes of their surrounding, then start the internal communication by releasing energy-rich cargo mimicking the behavior of the cells. The microgel particles subsequently complete closed-loop communication through providing negative feedback on capsules by enzymatic reaction and actuating pH-regulation of the whole system. Different communication modes and pH-regulation behaviors could be achieved by adjusting spatial and kinetic conditions. Proposed intelligent system is highly customizable due to the wide selection of encapsulated cargos, stimuli-responsive blocks and reaction networks, and would have broad influences in areas ranging from medical implants that assist in stabilizing body functions to microreactor system that regulate catalytic reactions.

A graphene oxide-based covalent resorufin-conjugated fluorescence "off-on" probe for detection of hydrazine

The unique properties of graphene oxide (GO), such as good water solubility, non-toxicity, biocompatibility and cell permeability, make GO well suited for a number of biological applications. In this study, we explore the application of GO as an efficient fluorescent quencher for a highly fluorescent organic dye, resorufin (RF). The quenching effect of GO on resorufin is studied by noncovalent and covalent bonding of resorufin, respectively. The fluorescence is completely quenched when resorufin is covalently linked to GO; while resorufin's fluorescence could be still observed through noncovalent bonding to GO sheet. Interestingly, addition of hydrazine into RF-GO complex causes the fluorescence recovered, providing a potential ''OFF-ON'' fluorescence responsive probe for detecting hydrazine in vitro and in living cells.

Nanozyme catalysis-assisted ratiometric multicolor sensing of heparin based on target-specific electrostatic-induced aggregation

Monitoring the level of heparin in clinical matrices is significant because of its pivotal role in preventing thrombosis. Compared to traditional single-signal sensors, multi-signal ratiometric detection can provide anti-interference results especially in complicated environments. However, fabricating an easy-to-operation, low-cost and robust sensor for the ratiometric detection of heparin still remains challenging. Here we propose a novel nanosensor for the ratiometric multicolor sensing of heparin with high performance. The sensor is based on the specific electrostatic interaction between the target and a positively charged species generated from nanozyme catalysis. FeMoO₄ nanorods are explored as an oxidase mimic for the first time, showing a high activity at neutral pH to catalyze the colorless 3,3',5,5'-tetramethylbenzidine (TMB) oxidation to blue TMBox with an absorbance at 652 nm. Heparin can induce the rapid aggregation of the produced TMBox intermediate with rich positive charges due to their strong electrostatic interaction, leading to the formation of a purple Heparin-TMBox complex providing a signal at 565 nm. With the increase of heparin, the color changes from blue to indigo and further purple, enabling the multicolor sensing of the target. As a result, ultrasensitive determination of heparin was obtained with a very low detection limit. The fabricated nanosensor could differentiate heparin from complex species with no interferences, and it provided reliable analytical results for heparin in both serum and plasma. With robust performance, low cost and facile fabrication, the sensor holds great potential in monitoring heparin for clinical applications.

Ultrafine fluorene-pyridine oligoelectrolyte nanoparticles for supersensitive fluorescence sensing of heparin and protamine

A new fluorene-pyridine oligoelectrolyte (OFP) is rationally proposed and readily synthesized via a simple one-pot Sonogashira approach. Hence, an unexpectedly small cationic oligomer nanosensor (i.e. OFPNPs, ∼ 1.2 nm in diameter) was conveniently fabricated owing to the enhanced flexibility endowed by the meta-substituted pyridyl unit. Inspiringly, this facile nanoplatform with low cytotoxicity favors the ultrasensitive fluorescence assay for heparin and protamine with a detection limit (LOD, S/N = 3) as low as 1.2 ng mL^-1 and 0.5 ng mL^-1, respectively, involving heparin-induced aggregation of OFPNPs through electrostatic interaction or competitive rebinding of protamine to heparin.

pH-responsive black phosphorus quantum dots for tumor-targeted photodynamic therapy

Black phosphorus quantum dots(BPQDs) have shown a good application prospect in the field of tumor therapy due to their photoelectric effect and good biodegradability. Due to the active endocytosis and fast metabolic efficiency of tumor cells, BPQDs are easy to be absorbed by tumor cells. However, this does not guarantee that BPQDs will be completely targeted to tumor cells, and normal cells will also absorb BPQDs. Because the cell membrane is negatively charged, BPQDs are also negatively charged and are not easily absorbed by cells under the action of electrostatic repulsion. Surface pegylation is the most common modification method of black phosphorus at present. However, surface pegylation can reduce the uptake of BPQDs by tumor cells. Positive PEG is also easy to be recognized and swallowed by the reticuloendothelial system. The inherent instability and poor tumor targeting of BPQDs under physiological conditions limit further research and clinical application. For this purpose, we selected cationic polymer polyethylenimine (PEI) to modify BPQDs and then added RGD peptides targeting tumor cells. An outer layer of negatively charged PEG+DMMA makes the nanosystem more stable . In the acidic environment of the tumor, the PEG layer has a charge reversal, and the positively charged PEI and the RGD polypeptide BPQDs targeted by the tumor cells are released into the tumor cells. It provides a new method for efficiently and accurately transporting BPQDs, a novel photosensitive nanomaterial, into tumor cells for photodynamic therapy.

An ultrasensitive, homogeneous fluorescence quenching immunoassay integrating separation and detection of aflatoxin M1 based on magnetic graphene composites

A homogeneous fluorescence quenching immunoassay is described for simultaneous separation and detection of aflatoxin M₁ (AFM₁) in milk. The novel assay relies on monoclonal antibody (mAb) functionalized Fe₃O₄ decorated reduced-graphene oxide (rGO-Fe₃O₄-mAb) as both capture probe and energy acceptor, combined with tetramethylrhodamine cadaverine-labeled aflatoxin B₁ (AFB₁-TRCA) as the energy donor. In the assay, AFB₁-TRCA binds to rGO-Fe₃O₄-mAb in the absence of AFM₁, quenching the fluorescence of TRCA by resonance energy transfer. Significantly, the immunoassay integrates sample preparation and detection into a single step, by using magnetic graphene composites to avoid washing and centrifugation steps, and the assay can be completed within 10 min. Under optimized conditions, the visual and quantitative detection limits of the assay for AFM₁ were 50 and 3.8 ng L^-1, respectively, which were significantly lower than those obtained by fluorescence polarization immunoassay using the same immunoreagents. Owing to its operation and highly sensitivity, the proposed assay provides a powerful tool for the detection of AFM₁.

Rhodamine Conjugated Gelatin Methacryloyl Nanoparticles for Stable Cell Imaging

Fluorescent nanomaterials have been widely used in biological imaging due to their selectivity, sensitivity, and noninvasive nature. These characteristics make the materials suitable for real-time and in situ imaging. However, further development of highly biocompatible nanosystems with long-lasting fluorescent intensity and photostability is needed for advanced bioimaging. We have used electrospraying to generate gelatin methacryloyl (GelMA)-based fluorescent nanoparticles (NPs) with chemically conjugated rhodamine B (RB). The extent of conjugation can be controlled by varying the mass ratio of RB and GelMA precursors to obtain RB-conjugated GelMA (RB-GelMA) NPs with optimal fluorescent properties and particle size. These NPs exhibited superior biocompatibility when compared with pure RB in in vitro cell viability and proliferation assays using multiple cell types. Moreover, RB-GelMA NPs showed enhanced cell internalization and improved brightness compared with unconjugated RB. Our experiments demonstrate that engineered RB-GelMA NPs can be used as a biocompatible fluorescent label for bioimaging.

A Novel Turn on Fluorescence Sensor for Determination Enoxaparin, a Low Molecular Weight Heparin

A sensor system was designed for the detection of Enoxaparin (Enox), a low molecular weight heparin (LMWH) that was run over the fluorescence quenching mechanism of fluorescein (FL) dye. At nanomolar concentrations, FL probe was subjected to fluorescence quenching by Fe(III). Fluorescence quenching mechanism of FL by Fe(III) was examined using various analytical techniques such as UV-vis absorption, fluorescence, and Fourier transform Infrared spectroscopy techniques, as well as with scanning electron microscope. The results indicated that photoinduced electron transfer process occurred between FL and Fe and that FL was quenched both statically and dynamically. Thermodynamic parameters showed that the interactions between them were predominantly hydrophobic interactions. Enox caused FL to recover its lost fluorescence properties and an increase was observed in the intensity of the fluorescence. Enox was detected successfully with the turn on fluorescence sensor. The developed Enox biosensor exhibited linearity in the range of 0-1.1 μg/ml. For Enox detection, the limit of detection was measured as 255 ng/mL. Enox biosensor was presented as a practical, simple, and applicable sensor system with high sensitivity and good selectivity. Enox is a medication usually monitored indirectly over anticoagulation. This study was presented as an alternative method for monitoring Enox directly. HIGHLIGHTS: Fluorescence quenching of Fluorescein dye by Fe(III) was studied in detail. The presence of enoxaparin enhanced the fluorescence properties of the fluorescein dye. A sensitive, simple and effective sensor system for determination of Enoxaparin, a low molecular weight heparin was shaped in the aqueous media. It was presented as a new method for Enoxaparin to be followed directly.

"Turn-on" fluorometric probe for α-glucosidase activity using red fluorescent carbon dots and 3,3',5,5'-tetramethylbenzidine

A turn-on method for determining α-glucosidase activity is described using a chemical redox strategy in which the fluorescence of red fluorescent carbon dots (CDs) is modulated. The red fluorescent CDs were prepared using a solvothermal method with p-phenylenediamine and sodium citrate. The excitation and emission maxima of the CDs were 490 and 618 nm, respectively. Ce⁴⁺ ions catalyze the oxidation of the colorless substrate 3,3',5,5'-tetramethylbenzidine (TMB) to give a blue oxidized TMB product (oxTMB). Absorption by oxTMB overlaps with the red light emitted by the CDs because of the fluorescence inner filter effect; therefore the presence of oxTMB decreases the intensity of fluorescence emission by the CDs. However, hydrolysis of L-ascorbic acid-2-O-α-D-glucopyranosyl by the enzyme α-glucosidase causes formation of ascorbic acid . Ascorbic acid reduces oxTMB to TMB, so that the inner filter effect disappeared and the fluorescence recovered. The strategy allows α-glucosidase activity to be successfully determined down to 0.02 U mL^-1 and gives a dynamic linear range of 0-5.5 U mL^-1. The strategy is very selective for α-glucosidase activity in the presence of potentially interfering substances. The method has been successfully applied to the determination of α-glucosidase activity in spiked human serum samples and gave satisfactory results. Graphical Abstract Schematic of the method used to prepare the carbon dots and the mechanisms involved in determining α-glucosidase activity.

Chemical sensors for selective and quantitative heparin sensing

In this review article, chemical sensors for selective and quantitative heparin sensing are discussed with detailed examples.

Lost in (Clinical) Translation: Recent Advances in Heparin Neutralization and Monitoring

The heparin family, which includes unfractionated heparin, low-molecular heparin, and fondaparinux, is a class of drugs clinically used as intravenous blood thinners. To date, issues related to both the reversal of anticoagulation and the blood level determination of the anticoagulant at the point-of-care remain: while the only U.S. Food and Drug Administration (FDA) approved antidote for heparin displays serious efficacy and safety drawbacks, the current assays for heparin monitoring are indirect measurements subject to their own limitations and variations. Herein, we provide an update on the numerous recent chemical approaches to tackle these issues, from which it is clear that some new antidotes and sensors for heparin certainly have the potential to exceed current clinical standards. This review aims to review a field that requires close collaborations between physicians, biologists, and chemists in order to foster advances toward clinical translation.

Preparation of graphene oxide-graphene quantum dots hybrid and its application in cancer theranostics

Currently, an enormous amount of cancer research based on two-dimensional nano-graphene oxide (GO), as well as zero-dimensional graphene quantum dots (GQDs), is being carried out in the fields of therapeutics and diagnostics. However, the exploration of their hybrid "functional" nanomaterials in the theranostic system is still rare. In the current study, a stable complex of GO and GQDs was formed by an electrostatic layer-by-layer assembly via a polyethylene imine bridge (GO-PEI-GQDs). Furthermore, we compared separate mono-equivalents of the GO-PEI-GQDs complex - GO and GQDs, in terms of cell imaging (diagnostics), photothermal, and oxidative stress response in breast cancer cells (MDA-MB-231). GO-PEI-GQDs showed an excellent photothermal response (44-49 °C) upon 808 nm laser (0.5 W cm^-2) exposure for 5 min at a concentration up to 50 μg/mL. We report new synergistic properties of GO-PEI-GQDs such as stable fluorescence imaging and enhanced photothermal and cytotoxic activities on cancer cells. Composite materials made up of GO and GQDs combining diverse properties help to study 2D-0D heterosystems and improve specific therapeutic systems in theranostics.

A facile chemiluminescence sensing for ultrasensitive detection of heparin using charge effect of positively-charged AuNPs

Heparin is a glycosaminoglycan with the highest negative charge density of any known biological molecule. Herein, this highly negative charge structure of heparin and the charge effect from positively-charged AuNPs for luminol chemiluminescence (CL) reaction were combined to build a facile and sensitive CL strategy for detection of heparin. The highly negative charge structure of heparin molecules (four negatively-charged side groups per repeat unit) and the effective signal amplification of charge effect from positively-charged AuNPs make this analysis to display high sensitivity for heparin detection, and the detection limit is as low as 0.06 ng/mL. It is about two orders of magnitude lower than the previously reported colorimetric assay and far lower than the current analysis methods. The established CL strategy is to use the electrostatic interaction between heparin and signal probe (positively-charged AuNPs). Since polyanionic heparin has the highest negative charge in biological system, this CL sensing shows high selectivity for the detection of heparin, and hyaluronic acid (HA), an analogue of heparin, cannot cause interference. This CL sensing succeeded in detecting heparin in human serum samples. Besides, polycationic protamine, heparin antidote, can respond to the system's CL signals through its strong interactions with heparin, thus indirectly detecting protamine. For protamine in serum samples, the detection result was basically consistent with Coomassie brilliant blue assay.

A colorimetric sensor for protamine detection based on the self-assembly of gold nanorods on graphene oxide

Here, we report a simple colorimetric detection method for the determination of protamine based on the self-assembly of gold nanorods (AuNRs) on graphene oxide (GO).

A ratiometric fluorometric heparin assay based on the use of CdTe and polyethyleneimine-coated carbon quantum dots

CdTe quantum dots (QDs) were integrated with polyethyleneimine-coated carbon dots (PEI-CDs) to form a dually emitting probe for heparin. The red fluorescence of the CdTe QDs is quenched by the PEI-CDs due to electrostatic interactions. In the presence of heparin, the blue fluorescence of PEI-CDs remains unaffected, while its quenching effect on the fluorescence of CdTe QDs is strongly reduced. A ratiometric fluorometric assay was worked out. The ratio of the fluorescences at 595 and 436 nm serves as the analytical signal. Response is linear in the concentration range of 50-600 ng·mL^-1 (0.1-1.2 U·mL^-1) of heparin. The limit of detection is 20 ng·mL^-1 (0.04 U·mL^-1). This makes the method a valuable tool for heparin monitoring during postoperative and long-term care. This assay is relatively free from the interference by other analogues which commonly co-exist with heparin in samples, and it is more robust than single-wavelength based assays. Graphical abstract In the presence of heparin, the fluorescence of polyethyleneimine-coated carbon dots (PEI-CDs) at 436 nm remains unaffected, while its quenching effect on the fluorescence of CdTe at 595 nm is strongly reduced.

Specific enrichment combined with highly efficient solid-phase tagging for the sensitive detection of heparin based on boronic acid-functionalized mesoporous silica nanospheres

A combined specific enrichment and highly efficient solid-phase tagging approach is presented for heparin detection using boronic acid-functionalized mesoporous silica nanospheres as extraction sorbents and nanoscale reactors. It exhibits a faster reaction time (only 6 min), higher tagging-product purity and lower applicable sample concentration compared with liquid-phase tagging.

Differential calixarene receptors create patterns that discriminate glycosaminoglycans

A well-designed fluorescence displacement sensing array based on calixarene receptors realizes the discrimination of glycosaminoglycans.

Turn-on Luminescent Probe for Hydrogen Peroxide Sensing and Imaging in Living Cells based on an Iridium(III) Complex-Silver Nanoparticle Platform

A sensitive turn-on luminescent sensor for H2O2 based on the silver nanoparticle (AgNP)-mediated quenching of an luminescent Ir(III) complex (Ir-1) has been designed. In the absence of H2O2, the luminescence intensity of Ir-1 can be quenched by AgNPs via non-radiative energy transfer. However, H2O2 can oxidize AgNPs to soluble Ag+ cations, which restores the luminescence of Ir-1. The sensing platform displayed a sensitive response to H2O2 in the range of 0-17 μM, with a detection limit of 0.3 μM. Importantly, the probe was successfully applied to monitor intracellular H2O2 in living cells, and it also showed high selectivity for H2O2 over other interfering substances.

Luminescent turn-on detection of Hg(II) via the quenching of an iridium(III) complex by Hg(II)-mediated silver nanoparticles

A novel luminescent turn-on detection method for Hg(II) was developed. The method was based on the silver nanoparticle (AgNP)-mediated quenching of Ir(III) complex 1. The addition of Hg(II) ions causes the luminescence of complex 1 to be recovered due to the oxidation of AgNPs by Hg(II) ions to form Ag(I) and Ag/Hg amalgam. The luminescence intensity of 1 increased in accord with an increased Hg(II) concentration ranging from 0 nM to 180 nM, with the detection limit of 5 nM. This approach offers an innovative method for the quantification of Hg(II).

Sensing Active Heparin by Counting Aggregated Quantum Dots at Single-Particle Level

Developing highly sensitive and highly selective assays for monitoring heparin levels in blood is required during and after surgery. In previous studies, electrostatic interactions are exploited to recognize heparin and changes in light signal intensity are used to sense heparin. In the present study, we developed a quantum dot (QD) aggregation-based detection strategy to quantify heparin. When cationic micelles and fluorescence QDs modified with anti-thrombin III (AT III) are added into heparin sample solution, the AT III-QDs, which specifically bind with heparin, aggregate around the micelles. The aggregated QDs are recorded by spectral imaging fluorescence microscopy and differentiated from single QDs based on the asynchronous process of blue shift and photobleaching. The ratio of aggregated QD spots to all counted QD spots is linearly related to the amount of heparin in the range of 4.65 × 10 ^-4 U/mL to 0.023 U/mL. The limit of detection is 9.3 × 10 ^-5 U/mL (∼0.1 nM), and the recovery of the spiked heparin at 0.00465 U/mL (∼5 nM) in 0.1% human plasma is acceptable.

Light up detection of heparin based on aggregation-induced emission and synergistic counter ion displacement

An easily accessible fluorescent light up probe HPQ-TBP-I is developed for sensitive and selective detection of heparin based on a synergistic strategy of aggregation-induced emission (AIE) and displacement of the fluorescence quencher iodide ion.

Studies on the interaction of heparin with lysozyme by multi-spectroscopic techniques and atomic force microscopy

The interaction between heparin (Hep) and lysozyme (Lyso) in vitro was studied by fluorescence, UV-vis, circular dichroism (CD), resonance Rayleigh scattering (RRS) spectroscopy and atomic force microscopy (AFM) under normal physiological conditions. UV-vis spectra of Lyso showed the absorbance was significantly increased with the addition of Hep. Fluorescence studies revealed that the emission quenching of Lyso with Hep was initiated by static quenching mechanism. CD spectral studies showed that Hep induced conformational changes in the secondary structure of Lyso. RRS spectra of Lyso showed the intensity of scattering was significantly increased with the addition of Hep and the enhanced RRS intensities were proportional to the concentration of Hep in a certain range. Thus, a new RRS method using Lyso as a probe could be used for the determination of Hep. The detection limit for Hep was 3.9 ng mL(-1). In addition, the shape of the complex was characterized by AFM. The possible reaction mechanism and the reasons for the enhancement of RRS intensity had been discussed through experimental results.

Merocyanine 540 adsorbed on polyethylenimine-functionalized graphene oxide nanocomposites as a turn-on fluorescent sensor for bovine serum albumin

We suggest a simple, fast, sensitive and selective BSA sensor designed by assembling MC540 molecules on PEI–GO nanocomposites.

Double-mode detection of HClO by naked eye and concurrent fluorescence increasing in absolute PBS

A fluorescent probe WCN for double-mode detection of HClO by naked eye and concurrent significant fluorescence increasing in absolute PBS.

Ultrasensitive detection of sulfide ions through interactions between sulfide ions and Au(iii) quenching the fluorescence of chitosan microspheres functionalized with rhodamine B and modified with Au(iii)

A rapid and facile fluorescence probe for detecting sulfide ions was developed. The probe can be completely regenerated and was easily separated. The approach described here is a new and convenient way of developing reusable fluorescence probes.

A "turn on" fluorescent probe for heparin and its oversulfated chondroitin sulfate contaminant

Designing "turn on" fluorescent probes for heparin (Hep), a widely used anticoagulant in clinics, is of great importance but remains challenging. By introducing a Hep specific binding peptide AG73 to a typical aggregation induced emission (AIE) fluorogen, tetraphenylethene (TPE), a sensitive and selective "turn on" fluorescent probe named TPE-1 for Hep was developed. TPE-1 was able to detect Hep in a wide pH range of 3-10 without obvious interference from tested anions and biomolecules, especially Hep analogues known as chondroitin sulfate (Chs) and hyaluronic acid (HA). The detection limit of Hep sensing was 3.8 ng mL-1, which was far below the clinically demanded concentration of Hep. The probe was applicable to both unfractionated Hep and low molecular weight Hep, the two main heparin products clinically used. Besides, the fluorescence of Hep bound TPE-1 can be turned off via sequential treatment with heparinases. Importantly, this phenomenon allows us to develop an enzyme assisted strategy for "turn on" sensing of oversulfated chondroitin sulfate (OSCS) with a detection limit of 0.001% (w%), which is the main contaminant in Hep and may cause severe adverse reactions including death.