A simple and label-free aptasensor based on nickel hexacyanoferrate nanoparticles as signal probe for highly sensitive detection of 17β-estradiol

Defective porphyrin-based metal-organic framework nanosheets derived from V2CTx MXene as a robust bioplatform for impedimetric aptasensing 17β-estradiol

An electrochemical aptasensor was prepared for the efficient, sensitive, and selective detection of 17β-estradiol. The sensor was based on a defective two-dimensional porphyrin-based metal-organic framework derived from V₂CT_x MXene. The resulting metal-organic framework nanosheets benefited from the advantages of V₂CT_x MXene nanosheets and porphyrin-based metal-organic framework, two-dimensional porphyrin-based metal-organic framework nanosheets demonstrated amplified electrochemical response and enhanced aptamer-immobilization ability compared with V₂CT_x MXene nanosheets. The sensor's detection limit was ultralow at 0.81 fg mL^-1 (2.97 fM), and the 17β-estradiol concentration range was wide, thereby outperforming most reported aptasensors. The high selectivity, superior stability and reproducibility, and excellent regeneration performance of the constructed aptasensor indicated its remarkable potential application for 17β-estradiol determination in diverse real samples. This aptasensing strategy can be used to analyze other targets by replacing the corresponding aptamer.

Role of Estradiol Hormone in Human Life and Electrochemical Aptasensing of 17β-Estradiol: A Review

Estradiol is known as one of the most potent estrogenic endocrine-disrupting chemicals (EDCs) that may cause various health implications on human growth, metabolism regulation, the reproduction system, and possibly cancers. The detection of these EDCs in our surroundings, such as in foods and beverages, is important to prevent such harmful effects on humans. Aptamers are a promising class of bio-receptors for estradiol detection due to their chemical stability and high affinity. With the development of aptamer technology, electrochemical aptasensing became an important tool for estradiol detection. This review provides detailed information on various technological interventions in electrochemical estradiol detection in solutions and categorized the aptasensing mechanisms, aptamer immobilization strategies, and electrode materials. Moreover, we also discussed the role of estradiol in human physiology and signaling mechanisms. The level of estradiol in circulation is associated with normal and diseased conditions. The aptamer-based electrochemical sensing techniques are powerful and sensitive for estradiol detection.

Enhancing Electrochemical Biosensor Performance for 17β-Estradiol Determination with Short Split-Aptamers

Chronic exposure of 17β-estradiol (E2) even at low concentration can disorganize the endocrine system and lead to undesirable health problems in the long run. An electrochemical biosensor for rapid detection of E2 in water samples was successfully developed. The biosensor was based on split DNA aptamers attached onto poly (methacrylic acid-co-n butyl acrylate-succinimide) microspheres deposited on polypyrrole nanowires coated electrode (PPY/PMAA-NBA). The sandwich paired of split DNA aptamers used were truncated from 75 mer parent aptamers. These two strands of 12-mer and 14-mer split DNA aptamers were then immobilized on the PMAA-NBA microspheres. In the presence of E2, the split DNA aptamers formed an apt12-E2-apt14 complex, where the binding reaction on the electrode surface led to the detection of E2 by differential pulse voltammetry using ferrocyanide as a redox indicator. Under optimum conditions, the aptasensor detected E2 concentrations in the range of 1 × 10^-4 M to 1 × 10^-12 M (R² = 0.9772) with a detection limit of 4.8 × 10^-13 M. E2, which were successfully measured in a real sample with 97-104% recovery and showed a good correlation (R² = 0.9999) with the established method, such as high-performance liquid chromatography. Interactions between short and sandwich-type aptamers (split aptamers) demonstrated improvement in aptasensor performance, especially the selectivity towards several potential interferents.

Electrochemical aptasensor based on electrodeposited poly(3,4-ethylenedioxythiophene)-graphene oxide coupled with Au@Pt nanocrystals for the detection of 17β-estradiol

An electrochemical aptasensor is reported for the sensitive and specific monitoring of 17β-estradiol (E2) based on the modification of electrodeposited poly(3,4-ethylenedioxythiophene) (PEDOT)-graphene oxide (GO) coupled with Au@Pt nanocrystals (Au@Pt). With excellent conductivity, chemical stability and active sites, the PEDOT-GO nanocomposite film was firstly in situ polymerized on the glassy carbon electrode by cyclic voltammetry. Subsequently, one-step synthesized Au@Pt were decorated on the conductive polymer, providing a platform for immobilizing the aptamer and enhancing the detecting sensitivity. With the addition of E2, since the interfacial electron transfer process was retarded by the E2-aptamer complex, the differential pulse voltammetry signal decreased gradually. Under optimum conditions, the calibration curve of E2 exhibited a linear range between 0.1 pM and 1 nM, with a low detection limit (S/N = 3) of 0.08 pM. The developed aptasensor showed admiring selectivity, stability, and reproducibility. It was tested in human serum, lake water and tap water samples after low-cost and simple pretreatment. Consequently, the developed platform could provide a new design thought for ultrasensitive detection of E2 in clinical and environmental samples.

Identification of the EdcR Estrogen-Dependent Repressor in Caenibius tardaugens NBRC 16725: Construction of a Cellular Estradiol Biosensor

In this work, Caenibius tardaugens NBRC 16725 (strain ARI-1) (formerly Novosphingobium tardaugens) was isolated due to its capacity to mineralize estrogenic endocrine disruptors. Its genome encodes the edc genes cluster responsible for the degradation of 17β-estradiol, consisting of two putative operons (OpA and OpB) encoding the enzymes of the upper degradation pathway. Inside the edc cluster, we identified the edcR gene encoding a TetR-like protein. Genetic studies carried out with C. tardaugens mutants demonstrated that EdcR represses the promoters that control the expression of the two operons. These genetic analyses have also shown that 17β-estradiol and estrone, the second intermediate of the degradation pathway, are the true effectors of EdcR. This regulatory system has been heterologously expressed in Escherichia coli, foreseeing its use to detect estrogens in environmental samples. Genome comparisons have identified a similar regulatory system in the edc cluster of Altererythrobacter estronivorus MHB5, suggesting that this regulatory arrangement has been horizontally transferred to other bacteria.

A magnetic relaxation switch sensor for determination of 17β-estradiol in milk and eggs based on aptamer-functionalized Fe3 O4 @Au nanoparticles

BACKGROUND

A simple and rapid detection method for 17β-estradiol (E₂ ) in complex food matrix is greatly desirable. A magnetic relaxation switch (MRS) sensor for detecting E₂ based on the aptamer-functionalized gold-coated iron oxide (Fe₃ O₄ @Au) nanocomposite was designed in this study. Fe₃ O₄ @Au nanoparticles (NPs) played as a 'switch' between dispersed and aggregated states, while aptamer served as the recognition unit.

RESULTS

According to the sensing effect of monocomponent relaxation time (T_2W ) for E₂ , the volume ratio of aptamers to Fe₃ O₄ @Au, the sodium chloride (NaCl) concentration, the concentration of Fe₃ O₄ @Au@Apt, and reaction time were optimized to be 4:1, 0.03 mol L^-1 , 4 μmol L^-1 and 15 min, respectively. For the analysis of food sample, the E₂ was quantified over a concentration range of 1 to 100 nmol L^-1 with a detection limit of 7.6 nmol L^-1 for milk samples, while a linearity range of 20 to 100 nmol L^-1 and a detection limit of 8.57 nmol L^-1 for egg samples.

CONCLUSION

These results exhibited that the MRS sensor could be a promising platform for the rapid detecting of E₂ in food sample. © 2021 Society of Chemical Industry.

Facile covalent preparation of carbon nanotubes / amine-functionalized Fe3O4 nanocomposites for selective extraction of estradiol in pharmaceutical industry wastewater

As a typical steroid hormone drug, estradiol (E2) is also one of the most frequently detected endocrine disrupting chemicals (EDCs) in the aquatic environment. Herein, in response to the potential risk of E2 in steroid hormone pharmaceutical industry wastewater to human and wildlife, a novel carbon nanotubes / amine-functionalized Fe₃O₄ (CNTs/MNPs@NH₂) nanocomposites with magnetic responsive have been developed for the enrichment and extraction of E2 in pharmaceutical industry wastewater, where amino-functionalized Fe₃O₄ magnetic nanoparticles (MNPs@NH₂) were used as a magnetic source. The resultant CNTs/MNPs@NH₂ possessed both the features of CNTs and desired magnetic property, enabling to rapidly recognize and separate E2 from pharmaceutical industry wastewater. Meanwhile, the CNTs/MNPs@NH₂ had good binding behavior toward E2 with fast binding kinetics and high adsorption capacity, as well as exhibited satisfactory selectivity to steroidal estrogen compounds. Furthermore, the change of pH value of aqueous phase in adsorption solvent hardly affected the adsorption of E2 by CNTs/MNPs@NH₂, and the adsorption capacity of E2 ranged from 19.9 to 17.2 mg g^-1 in the pH range of 3.0 to 11.0, which is a latent advantage of the follow-up development method to detect E2 in pharmaceutical industry wastewater. As a result, the CNTs/MNPs@NH₂ serving as a solid phase extraction medium were successfully applied to efficiently extract E2 from pharmaceutical industry wastewater. Therefore, the CNTs/MNPs@NH₂ nanocomposites could be used as a potential adsorbent for removing steroidal estrogens from water. More importantly, the developed method would provide a promising solution for the monitoring and analysis of EDCs in pharmaceutical industry wastewater.

A Sensitive Impedimetric Aptasensor Based on Carbon Nanodots Modified Electrode for Detection of 17ß-Estradiol

A simple and sensitive aptasensor based on conductive carbon nanodots (CDs) was fabricated for the detection of 17ß-Estradiol (E2). In the present study, the hydrothermal synthesis of carbon nanodots was successfully electrodeposited on a screen-printed electrode (SPE) as a platform for immobilization of 76-mer aptamer probe. The morphology and structure of the nanomaterial were characterized by UV-visible absorption spectra, Fluorescence spectra, Transmission electron microscopy (TEM) and Fourier transform infrared spectroscopy (FTIR). Moreover, cyclic voltammetry and electrochemical impedance spectroscopy were used to investigate the electrochemical performance of the prepared electrodes. Subsequently, impedimetric (EIS) measurements were employed to investigate the relative impedances changes before and after E2 binding, which results in a linear relationship of E2 concentration in the range of 1.0 × 10-7 to 1.0 × 10 -12 M, with a detection limit of 0.5 × 10-12 M. Moreover, the developed biosensor showed high selectivity toward E2 and exhibited excellent discrimination against progesterone (PRG), estriol (E3) and bisphenol A (BPA), respectively. Moreover, the average recovery rate of spiked river water samples with E2 ranged from 98.2% to 103.8%, with relative standard deviations between 1.1% and 3.8%, revealing the potential application of the present biosensor for E2 detection in water samples.

Monitoring 2,3',5,5'-tetrachlorobiphenyl with a rapid and sensitive environmental aptamer sensor

Polychlorinated biphenyl (PCB) detection in the environment is significant for both environmental protection and human health. Herein, a highly sensitive aptamer sensor has been established by employing a 2,3',5,5'-tetrachlorobiphenyl (PCB72) targeting aptamer as a highly specific recognition element and a gold/silver (Au@Ag) nanocomposite as the surface-enhanced Raman spectroscopy (SERS) substrate for detecting environmental PCB72. The Au@Ag nanoparticles (NPs) exhibit a strong SERS enhancement and provide an efficient substrate for immobilizing the PCB72 aptamer and Raman signal labelled molecule, 4-mercaptobenzoic acid (4-MBA). The targeted PCB72 could competitively bind with the PCB72 aptamer, resulting in a few aptamers sticking to the Au@Ag NPs and the "hot spot" strengthening effect of the substrate. Under optimal conditions, this aptamer sensor exhibits great performance with high sensitivity, excellent selectivity and stability for the monitoring of PCB72, which shows an excellent linear correlation ranging from 1 to 1000 pg mL-1 with a limit of detection of 0.3 pg mL-1. Furthermore, this aptamer assay exhibits high specificity and selectivity for PCB72 with the detection error of less than 0.27 for other PCBs and 0.21 for other interfering species, even if the coexisting interferents are 100-fold concentration in the system. Additionally, the recognition mechanism of the binding of aptamers to PCB72 is analyzed via UV-vis spectroscopy and molecular docking simulations, which suggest that PCB72 could insert into the aptamers. Furthermore, this method is successfully utilized for PCB72 detection in real water samples with a simple pre-treatment. In general, this work provides a new and effective method using an environmental aptamer sensor for rapid and sensitive PCB72 detection.

Electrochemical aptamer-based sensors for food and water analysis: A review

Global food and water safety issues have prompted the development of highly sensitive, specific, and fast analytical techniques for food and water analysis. The electrochemical aptamer-based detection platform (E-aptasensor) is one of the more promising detection techniques because of its unique combination of advantages that renders these sensors ideal for detection of a wide range of target analytes. Recent research results have further demonstrated that this technique has potential for real world analysis of food and water contaminants. This review summaries the recently developed E-aptasensors for detection of analytes related to food and water safety, including bacteria, mycotoxins, algal toxins, viruses, drugs, pesticides, and metal ions. Ten different electroanalytical techniques and one opto-electroanalytical technique commonly employed with these sensors are also described. In addition to highlighting several novel sensor designs, this review also describes the strengths, limitations, and current challenges this technology faces, and future development trend.

A simple and highly selective electrochemical label-free aptasensor of 17β-estradiol based on signal amplification of bi-functional graphene

In the present work, a convenient signal-on electrochemical label-free aptasensor for 17β-estradiol (E2), a typical steroidal hormones endocrine disrupting chemicals, was proposed. 6-mercapto-1-hexanol (MCH) self-assembled monolayer (SAM) modified Au (MCH/Au) electrode was used as the substrate electrode. Graphene is used with bi-functions, not only to adsorb E2 binding aptamer, serving as the recognition element to E2, but also to be assembled onto MCH/Au electrode when sensing E2, to controllably turn on the electron transfer (eT), and further indicate the signal to E2 concentration. With the synergistic effect of DNase I enzyme, highly sensitive detection of E2 was achieved at this aptasensing system, with a linear range from 0.07 to 10 pM and a detection limit of 50 fM. An outstanding selectivity towards E2 was proven for the sensing system by simultaneously detecting 100-fold potential co-existing interferences. The stability and reproducibility were also evaluated to be satisfactory. Spiked real water analysis further indicated its reliability and potential in practical environmental monitoring.

Critical Review: DNA Aptasensors, Are They Ready for Monitoring Organic Pollutants in Natural and Treated Water Sources?

There is a growing need to monitor anthropogenic organic contaminants detected in water sources. DNA aptamers are synthetic single-stranded oligonucleotides, selected to bind to target contaminants with favorable selectivity and sensitivity. These aptamers can be functionalized and are used with a variety of sensing platforms to develop sensors, or aptasensors. In this critical review, we (1) identify the state-of-the-art in DNA aptamer selection, (2) evaluate target and aptamer properties that make for sensitive and selective binding and sensing, (3) determine strengths and weaknesses of alternative sensing platforms, and (4) assess the potential for aptasensors to quantify environmentally relevant concentrations of organic contaminants in water. Among a suite of target and aptamer properties, binding affinity is either directly (e.g., organic carbon partition coefficient) or inversely (e.g., polar surface area) correlated to properties that indicate greater target hydrophobicity results in the strongest binding aptamers, and binding affinity is correlated to aptasensor limits of detection. Electrochemical-based aptasensors show the greatest sensitivity, which is similar to ELISA-based methods. Only a handful of aptasensors can detect organic pollutants at environmentally relevant concentrations, and interference from structurally similar analogs commonly present in natural waters is a yet-to-be overcome challenge. These findings lead to recommendations to improve aptasensor performance.

Poly(N-isopropylacrylamide) microgel-based etalons for the label-free quantitation of estradiol-17β in aqueous solutions and milk samples

A novel estradiol-17β (E2) biosensor was constructed from poly(N-isopropylacrylamide) (pNIPAm) microgel-based etalons by modification of their outermost Au layer with an E2 binding 75-mer DNA aptamer. When E2 is not present in the solution, the aptamer forms a loose/linear structure that allows ions to pass through and into the microgel layer. The ions can change the solvation state of the microgels, which changes the optical properties of the etalon. When E2 is present in the solution, the aptamer binds the E2 and undergoes a conformational change to a form that can block the diffusion of salt ions into the microgel layer. This blocking decreases the response of the device to salt exposure, which can be related to the concentration of E2 in solution. Using this approach, E2 sensor showed a dynamic range of 0.9-200 pg/mL with a calculated detection limit of 0.9 pg/mL (3.2 pM) E2, and the lowest measured concentration of E2 is 5.0 pg/mL. This sensor also showed low cross reactivity with progesterone, a similar steroid hormone. Moreover, this sensor could be regenerated five times without losing its sensitivity. Finally, we demonstrated that the sensor could also be used to quantify E2 in commercial skim and 2% milk, as well as farm milk directly without any pre-treatment. The successful quantitation of E2 in unprocessed milk demonstrates its potential use as a "cow-side" testing device for the dairy industry. Graphical abstract ᅟ.

Oxygen Vacancy Engineering in Europia Clusters/Graphite-Like Carbon Nitride Nanostructures Induced Signal Amplification for Highly Efficient Electrochemiluminesce Aptasensing

Oxygen vacancy is an intrinsic defect in metal oxide semiconductors and has a crucial influence on their physicochemical and electronic properties. To boost the electrochemiluminescence (ECL) efficiency of the graphite-like carbon nitride (g-C₃N₄), the wet-chemical-calcination method was developed to introduce an oxygen vacancy in Eu-doped g-C₃N₄ nanostructures for the first time. The morphology and structure characterization suggest that the Eu element was present in the matrix of the europia (Eu₂O₃) clusters. Because of the effect of oxygen vacancy promoting catalytic activity, the doping of Eu caused a great positive shift of onset potential and large signal amplification in cathodic ECL signals compared with pure g-C₃N₄. Furthermore, a novel and ultrasensitive ECL aptasensor was realized with 17β-estradiol (E2) as a prototype target by adsorption of E2 aptamer onto the Eu₂O₃-doped g-C₃N₄ (Eu₂O₃- g-C₃N₄) surface via van der Waals force. Given the specific recognition between aptamer and E2, the ECL signal decreased with the increasing concentration of E2, because the formation of E2-aptamer complex impeded the diffusion of luminophor molecules and the electrons approaching the surface of the electrode. Under the optimal cases, the as-prepared ECL aptasensor showed superior performances and also manifested outstanding selectivity toward E2. The present conceptual strategy offers a novel methodology to boost the sensitivity of the ECL sensor and promote the activity of ECL reagents.

Practical Application of Aptamer-Based Biosensors in Detection of Low Molecular Weight Pollutants in Water Sources

Water pollution has become one of the leading causes of human health problems. Low molecular weight pollutants, even at trace concentrations in water sources, have aroused global attention due to their toxicity after long-time exposure. There is an increased demand for appropriate methods to detect these pollutants in aquatic systems. Aptamers, single-stranded DNA or RNA, have high affinity and specificity to each of their target molecule, similar to antigen-antibody interaction. Aptamers can be selected using a method called Systematic Evolution of Ligands by EXponential enrichment (SELEX). Recent years we have witnessed great progress in developing aptamer selection and aptamer-based sensors for low molecular weight pollutants in water sources, such as tap water, seawater, lake water, river water, as well as wastewater and its effluents. This review provides an overview of aptamer-based methods as a novel approach for detecting low molecular weight pollutants in water sources.

Graphite nanoparticle as nanoquencher for 17β-estradiol detection using shortened aptamer sequence

Here a shortened aptamer was used as the recognition element and a graphite nanoparticle as the nanoquencher for constructing a FRET based aptasensor to detect 17β-estradiol.

Ensuring food safety using aptamer based assays: Electroanalytical approach

Aptamers, are being increasingly employed as favorable receptors for constructing highly sensitive biosensors, for their remarkable affinities towards certain targets including a wide scope of biological or chemical substances, and their superiority over other biologic receptors. The selectivity and affinity of the aptamers have been integrated with the wise design of the assay, applying suitable modifications, such as nanomaterials on the electrode surface, employing oligonucleotide-specific amplification strategies or, their combinations. After successful performance of the electrochemical aptasensors for biomedical applications, the food sector with its direct implication for human health, which demands rapid and sensitive and economic analytical solutions for determination of health threatening contaminants in all stages of production process, is the next field of research for developing efficient electrochemical aptasensors. The aim of this review is to categorize and introduce food hazards and summarize the recent electrochemical aptasensors that have been developed to address these contaminants.

Flow injection amperometric sandwich-type aptasensor for the determination of human leukemic lymphoblast cancer cells using MWCNTs-Pdnano/PTCA/aptamer as labeled aptamer for the signal amplification

In this research, we demonstrated a flow injection amperometric sandwich-type aptasensor for the determination of human leukemic lymphoblasts (CCRF-CEM) based on poly(3,4-ethylenedioxythiophene) decorated with gold nanoparticles (PEDOT-Au_nano) as a nano platform to immobilize thiolated sgc8c aptamer and multiwall carbon nanotubes decorated with palladium nanoparticles/3,4,9,10-perylene tetracarboxylic acid (MWCNTs-Pd_nano/PTCA) to fabricate catalytic labeled aptamer. In the proposed sensing strategy, the CCRF-CEM cancer cells were sandwiched between immobilized sgc8c aptamer on PEDOT-Au_nano modified surface electrode and catalytic labeled sgc8c aptamer (MWCNTs-Pd_nano/PTCA/aptamer). After that, the concentration of CCRF-CEM cancer cells was determined in presence of 0.1 mM hydrogen peroxide (H₂O₂) as an electroactive component. The attached MWCNTs-Pd_nano nanocomposites to CCRF-CEM cancer cells amplified the electrocatalytic reduction of H₂O₂ and improved the sensitivity of the sensor to CCRF-CEM cancer cells. The MWCNT-Pd_nano nanocomposite was characterized with transmission electron microscopy (TEM) and energy dispersive X-ray (EDX). The electrochemical impedance spectroscopy (EIS) and cyclic voltammetry (CV) were used to confirm the stepwise changes in the electrochemical surface properties of the electrode. The proposed sandwich-type electrochemical aptasensor exhibited an excellent analytical performance for the detection of CCRF-CEM cancer cells ranging from 1.0 × 10¹ to 5.0 × 10⁵ cells mL^-1. The limit of detection was 8 cells mL^-1. The proposed aptasensor showed high selectivity toward CCRF-CEM cancer cells. The proposed aptasensor was also applied to the determination of CCRF-CEM cancer cells in human serum samples.

Simultaneous Visualization and Quantitation of Multiple Steroid Hormones Based on Signal-Amplified Biosensing with Duplex Molecular Recognition

The simultaneous quantitation of multiple steroid hormones in real time is of great importance in medical diagnosis. In this study, a portable hormone biosensor based on duplex molecular recognition coupled with a signal-amplified substrate was successfully developed for the simultaneous visualization and quantitation of multiple steroid hormones. Aptamer-functionalized upconversion nanoparticles (UCNPs) with different emission peaks are immobilized on the photonic crystal (PC) substrate as the nanoprobes, leading to the specific and simultaneous assay of multiple steroid hormones. Coupled with the luminescence-enhanced effect of the PC substrate, nanomolar quantification limits of multiple hormones are achieved. This well-designed biosensor is also promising in the quantification of multiple hormones in serum samples. The amplified luminescence signals can be visualized with the naked eye and captured by an unmodified phone camera. This hormone quantitation biosensor exhibits the advantages of multi-detection, visualization, high sensitivity, and selectivity for potential applications in clinical disease diagnosis.

The characterization and validation of 17β-estradiol binding aptamers

The rapid and sensitive detection of small molecules is garnering increasing importance, and aptamers show great promise in replacing expensive, elaborate detection platforms exploiting chromatographic separation or antibody-based assays. The characterization of aptamer interaction with small molecule targets is not facile, and there is a mature need for a rapid, high-throughput technique for the analysis of aptamer-small molecule kinetics and affinity. In this work we present methodologies for the evaluation of aptamer-small molecule interactions, using the aptamers reported against the steroid 17β-estradiol as a model system. Microscale thermophoresis, apta-PCR affinity assay and surface plasmon resonance were explored to evaluate the reported aptamers' binding properties in terms of affinity and specificity, and were demonstrated to be successfully applied to the analysis of aptamer-small molecule interactions.

Selection and Biosensor Application of Aptamers for Small Molecules

Small molecules play a major role in the human body and as drugs, toxins, and chemicals. Tools to detect and quantify them are therefore in high demand. This review will give an overview about aptamers interacting with small molecules and their selection. We discuss the current state of the field, including advantages as well as problems associated with their use and possible solutions to tackle these. We then discuss different kinds of small molecule aptamer-based sensors described in literature and their applications, ranging from detecting drinking water contaminations to RNA imaging.

Label-free electrochemical immunosensor based on enhanced signal amplification between Au@Pd and CoFe2O4/graphene nanohybrid

The improvement of sensitivity of electrochemical immunosensor can be achieved via two approaches: increasing loading capacities of antibody and enlarging responding electrochemical signals. Based on these, CoFe2O4/graphene nanohybrid (CoFe2O4/rGO) as support was firstly used for preparing electrochemical biosensor, and with the addition of Au@Pd nanorods (NRs) as mimic enzyme, a label-free electrochemical immunosensor was prepared. Due to the high electrical conductivity, open porous structure and large loading capacities of CoFe2O4/rGO, the enhanced signal amplification between Au@Pd NRs and CoFe2O4/rGO was studied. Fabricated as a novel substrate, the prepared immunosensor had a good analytical performance and exhibited a wide linear range from 0.01 to 18.0 ng · mL(-1) with a low detection limit of 3.3 pg · mL(-1) for estradiol, which was succeeded in applying to detect estradiol in the natural water.

Comparison of Electrochemical Immunosensors and Aptasensors for Detection of Small Organic Molecules in Environment, Food Safety, Clinical and Public Security

We review here the most frequently reported targets among the electrochemical immunosensors and aptasensors: antibiotics, bisphenol A, cocaine, ochratoxin A and estradiol. In each case, the immobilization procedures are described as well as the transduction schemes and the limits of detection. It is shown that limits of detections are generally two to three orders of magnitude lower for immunosensors than for aptasensors, due to the highest affinities of antibodies. No significant progresses have been made to improve these affinities, but transduction schemes were improved instead, which lead to a regular improvement of the limit of detections corresponding to ca. five orders of magnitude over these last 10 years. These progresses depend on the target, however.

Hierarchical Nafion enhanced carbon aerogels for sensing applications

This work describes the fabrication of hierarchical 3D Nafion enhanced carbon aerogels (NECAGs) for sensing applications via a fast freeze drying method. Graphene oxide, multiwalled carbon nanotubes and Nafion were mixed and extruded into liquid nitrogen followed by the removal of ice crystals by freeze drying. The addition of Nafion enhanced the mechanical strength of NECAGs and effective control of the cellular morphology and pore size was achieved. The resultant NECAGs demonstrated high strength, low density, and high specific surface area and can achieve a modulus of 20 kPa, an electrical conductivity of 140 S m(-1), and a specific capacity of 136.8 F g(-1) after reduction. Therefore, NECAG monoliths performed well as a gas sensor and as a biosensor with high sensitivity and selectivity. The remarkable sensitivity of 8.52 × 10(3)μA mM(-1) cm(-2) was obtained in dopamine (DA) detection, which is two orders of magnitude better than the literature reported values using graphene aerogel electrodes made from a porous Ni template. These outstanding properties make the NECAG a promising electrode candidate for a wide range of applications. Further in-depth investigations are being undertaken to probe the structure-property relationship of NECAG monoliths prepared under various conditions.

Size-controllable ultrathin carboxylated polypyrrole nanotube transducer for extremely sensitive 17β-estradiol FET-type biosensors

Size-controllable aptamer conjugated ultrathin carboxylated polypyrrole nanotubes (A-UCPPyNTs) were successfully fabricated as transducers in 17β-estradiol field-effect transistor (FET)-type biosensors which has extremely high sensitivity (∼1 fM) and unique selectivity.

Non-enzymatic detection of urea using unmodified gold nanoparticles based aptasensor

Biosensing nitrogenous compounds like urea is required to control the incidents of Economically Motivated Adulteration (EMA). In this study, we report the FluMag Systematic Evolution of Ligands by Exponential Enrichment (FluMag-SELEX) method to isolate a urea specific DNA aptamer with a dissociation constant (Kd) of 232 nM. The interaction of DNA aptamer with urea has been confirmed by affinity assay, CD analysis, melting curve analysis and truncation studies. Unlike other urea sensing methods reported so far, using this urea aptamer, we demonstrate a simple, 'non-enzymatic' easy-to-use, dual readout aptasensor that exploits unmodified gold nanoparticles (AuNPs) to transduce the signals of aptamer binding to urea in terms of intrinsic fluorescence differences and color changes simultaneously. This method is free from complicated sample processing and labeling steps. The urea aptasensor displays high selectivity for urea and is free from interference from common milk adulterants. The developed aptasensor reliably detects urea adulteration in milk. The response signals linearly correlate with the increasing concentrations of urea in milk ranging from 20mM to 150 mM with detection limit of 20mM. We also show that this aptasensor can also be used as a simple fluorescence based "turn-on" sensor. The results obtained in this study are comparable to the commercial urease based detection methods.