Bifunctional magnetic nanobeads for sensitive detection of avian influenza A (H7N9) virus based on immunomagnetic separation and enzyme-induced metallization

Simultaneous detection of multiple influenza virus subtypes based on microbead-encoded microfluidic chip

Influenza virus, existing many subtypes, causes a huge risk of people health and life. Different subtypes bring a huge challenge for detection and treatment, thus simultaneous detection of multiple influenza virus subtypes plays a key role in fight against this disease. In this work, three kinds of influenza virus subtypes are one-step detection based on microbead-encoded microfluidic chip. HIN1, H3N2 and H7N3 were simultaneously captured only by microbeads of different magnetism and sizes, and they were further treated by magnetic separation and enriched through the magnetism and size-dependent microfluidic structure. Different subtypes of influenza virus could be linearly encoded in different detection zones of microfluidic chip according to microbeads of magnetism and size differences. With the high-brightness quantum dots (QDs) as label, the enriched fluorescence detection signals were further read online from linearly encoded strips, obtaining high sensitivity with detection limit of HIN1, H3N2, H7N3 about 2.2 ng/mL, 3.4 ng/mL and 2.9 ng/mL. Moreover, a visual operation interface, microcontroller unit and two-way syringe pump were consisted of a miniaturized detection device, improving the detection process automation. And this assay showed strong specificity. This method improves a new way of multiple pathogens detection using microbead-encoded technologies in the microfluidic chip.

Progress in Electrochemical Immunosensors with Alkaline Phosphatase as the Signal Label

Electrochemical immunosensors have shown great potential in clinical diagnosis, food safety, environmental protection, and other fields. The feasible and innovative combination of enzyme catalysis and other signal-amplified elements has yielded exciting progress in the development of electrochemical immunosensors. Alkaline phosphatase (ALP) is one of the most popularly used enzyme reporters in bioassays. It has been widely utilized to design electrochemical immunosensors owing to its significant advantages (e.g., high catalytic activity, high turnover number, and excellent substrate specificity). In this work, we summarized the achievements of electrochemical immunosensors with ALP as the signal reporter. We mainly focused on detection principles and signal amplification strategies and briefly discussed the challenges regarding how to further improve the performance of ALP-based immunoassays.

Functional Nanomaterials Enhancing Electrochemical Biosensors as Smart Tools for Detecting Infectious Viral Diseases

Electrochemical biosensors are known as analytical tools, guaranteeing rapid and on-site results in medical diagnostics, food safety, environmental protection, and life sciences research. Current research focuses on developing sensors for specific targets and addresses challenges to be solved before their commercialization. These challenges typically include the lowering of the limit of detection, the widening of the linear concentration range, the analysis of real samples in a real environment and the comparison with a standard validation method. Nowadays, functional nanomaterials are designed and applied in electrochemical biosensing to support all these challenges. This review will address the integration of functional nanomaterials in the development of electrochemical biosensors for the rapid diagnosis of viral infections, such as COVID-19, middle east respiratory syndrome (MERS), influenza, hepatitis, human immunodeficiency virus (HIV), and dengue, among others. The role and relevance of the nanomaterial, the type of biosensor, and the electrochemical technique adopted will be discussed. Finally, the critical issues in applying laboratory research to the analysis of real samples, future perspectives, and commercialization aspects of electrochemical biosensors for virus detection will be analyzed.

CRISPR-empowered hybridization chain reaction amplification for an attomolar electrochemical sensor

Rapid pathogen screening holds the key against certain viral infections, especially in an overwhelming pandemic. Herein, a CRISPR-empowered electrochemical biosensor was designed for the ultrasensitive detection of the avian influenza A (H7N9) virus gene sequence. Combining the CRISPR/Cas system, a signal-amplification strategy and a high-conductivity sensing substrate, the developed biosensor showed an ultrawide dynamic range, an ultralow detection limit, and excellent selectivity for H7N9 detection, providing a potential sensing platform for the simple, fast, sensitive, and on-site detection of infectious diseases.

Paper-based electrochemical immunosensor for label-free detection of multiple avian influenza virus antigens using flexible screen-printed carbon nanotube-polydimethylsiloxane electrodes

Many studies have been conducted on measuring avian influenza viruses and their hemagglutinin (HA) antigens via electrochemical principles; most of these studies have used gold electrodes on ceramic, glass, or silicon substrates, and/or labeling for signal enhancement. Herein, we present a paper-based immunosensor for label-free measurement of multiple avian influenza virus (H5N1, H7N9, and H9N2) antigens using flexible screen-printed carbon nanotube-polydimethylsiloxane electrodes. These flexible electrodes on a paper substrate can complement the physical weakness of the paper-based sensors when wetted, without affecting flexibility. The relative standard deviation of the peak currents was 1.88% when the electrodes were repeatedly bent and unfolded twenty times with deionized water provided each cycle, showing the stability of the electrodes. For the detection of HA antigens, approximately 10-μl samples (concentration: 100 pg/ml–100 ng/ml) were needed to form the antigen–antibody complexes during 20–30 min incubation, and the immune responses were measured via differential pulse voltammetry. The limits of detections were 55.7 pg/ml (0.95 pM) for H5N1 HA, 99.6 pg/ml (1.69 pM) for H7N9 HA, and 54.0 pg/ml (0.72 pM) for H9N2 HA antigens in phosphate buffered saline, and the sensors showed good selectivity and reproducibility. Such paper-based sensors are economical, flexible, robust, and easy-to-manufacture, with the ability to detect several avian influenza viruses.

Electrochemical investigations for COVID-19 detection-A comparison with other viral detection methods

Virus-induced infection such as SARS-CoV-2 is a serious threat to human health and the economic setback of the world. Continued advances in the development of technologies are required before the viruses undergo mutation. The low concentration of viruses in environmental samples makes the detection extremely challenging; simple, accurate and rapid detection methods are in urgent need. Of all the analytical techniques, electrochemical methods have the established capabilities to address the issues. Particularly, the integration of nanotechnology would allow miniature devices to be made available at the point-of-care. This review outlines the capabilities of electrochemical methods in conjunction with nanotechnology for the detection of SARS-CoV-2. Future directions and challenges of the electrochemical biosensors for pathogen detection are covered including wearable and conformal biosensors, detection of plant pathogens, multiplexed detection, and reusable biosensors for on-site monitoring, thereby providing low-cost and disposable biosensors.

Nanomaterial application in bio/sensors for the detection of infectious diseases

Infectious diseases are a potential risk for public health and the global economy. Fast and accurate detection of the pathogens that cause these infections is important to avoid the transmission of the diseases. Conventional methods for the detection of these microorganisms are time-consuming, costly, and not applicable for on-site monitoring. Biosensors can provide a fast, reliable, and point of care diagnostic. Nanomaterials, due to their outstanding electrical, chemical, and optical features, have become key players in the area of biosensors. This review will cover different nanomaterials that employed in electrochemical, optical, and instrumental biosensors for infectious disease diagnosis and how these contributed to enhancing the sensitivity and rapidity of the various sensing platforms. Examples of nanomaterial synthesis methods as well as a comprehensive description of their properties are explained. Moreover, when available, comparative data, in the presence and absence of the nanomaterials, have been reported to further highlight how the usage of nanomaterials enhances the performances of the sensor.

Advancements in electrochemical biosensing for respiratory virus detection: A review

Respiratory viruses are real menace for human health which result in devastating epidemic disease. Consequently, it is in urgent need of identifying and quantifying virus with a rapid, sensitive and precise approach. The study of electrochemical biosensors for respiratory virus detection has become one of the most rapidly developing scientific fields. Recent developments in electrochemical biosensors concerning respiratory virus detection are comprehensively reviewed in this paper. This review is structured along common detecting objects of respiratory viruses, electrochemical biosensors, electrochemical biosensors for respiratory virus detection and future challenges. The electrochemical biosensors for respiratory virus detection are introduced, including nucleic acids-based, immunosensors and other affinity biosensors. Lastly, for Coronavirus disease 2019 (COVID-19) diagnosis, the future challenges regarding developing electrochemical biosensor-based Point-of-Care Tests (POCTs) are summarized. This review is expected to provide a helpful guide for the researchers entering this interdisciplinary field and developing more novel electrochemical biosensors for respiratory virus detection.

Sensitive antibody fluorescence immunosorbent assay (SAFIA) for rapid on-site detection on avian influenza virus H9N2 antibody

Avian influenza virus (AIV) is a serious zoonotic disease causing severe damages to both poultry industry and human health. To rapidly detect AIV on-site with high sensitivity and accuracy, we design sensitive antibody fluorescence immunosorbent assay (SAFIA) on AIV H9N2 antibody. In SAFIA, hemagglutinin (HA1) protein coated sample chamber specifically binds targets but remarkably reduces non-specific absorption; Protein L coated polystyrene microsphere captures target through secondary antibody to significantly amplify the fluorescence signal; and a portable fluorescence counter automatically measures the fluorescence spot density for AIV H9N2 antibody detection. Proved by practical applications, SAFIA could probe AIV H9N2 antibody in high sensitivity and selectivity, and distinguish positive and negative serum samples in high accuracy. Additionally, SAFIA can rapidly detect AIV H9N2 antibody at room temperature only requiring simple operations as well as cost-effective and compact devices. Therefore, SAFIA is a potential new-generation tool in rapid on-site testing for agricultures.

Advances in airborne microorganisms detection using biosensors: A critical review

Humanity has been facing the threat of a variety of infectious diseases. Airborne microorganisms can cause airborne infectious diseases, which spread rapidly and extensively, causing huge losses to human society on a global scale. In recent years, the detection technology for airborne microorganisms has developed rapidly; it can be roughly divided into biochemical, immune, and molecular technologies. However, these technologies still have some shortcomings; they are time-consuming and have low sensitivity and poor stability. Most of them need to be used in the ideal environment of a laboratory, which limits their applications. A biosensor is a device that converts biological signals into detectable signals. As an interdisciplinary field, biosensors have successfully introduced a variety of technologies for bio-detection. Given their fast analysis speed, high sensitivity, good portability, strong specificity, and low cost, biosensors have been widely used in environmental monitoring, medical research, food and agricultural safety, military medicine and other fields. In recent years, the performance of biosensors has greatly improved, becoming a promising technology for airborne microorganism detection. This review introduces the detection principle of biosensors from the three aspects of component identification, energy conversion principle, and signal amplification. It also summarizes its research and application in airborne microorganism detection. The new progress and future development trend of the biosensor detection of airborne microorganisms are analyzed.

A Review on SERS-Based Detection of Human Virus Infections: Influenza and Coronavirus

The diagnosis of respiratory viruses of zoonotic origin (RVsZO) such as influenza and coronaviruses in humans is crucial, because their spread and pandemic threat are the highest. Surface-enhanced Raman spectroscopy (SERS) is an analytical technique with promising impact for the point-of-care diagnosis of viruses. It has been applied to a variety of influenza A virus subtypes, such as the H1N1 and the novel coronavirus SARS-CoV-2. In this work, a review of the strategies used for the detection of RVsZO by SERS is presented. In addition, relevant information about the SERS technique, anthropozoonosis, and RVsZO is provided for a better understanding of the theme. The direct identification is based on trapping the viruses within the interstices of plasmonic nanoparticles and recording the SERS signal from gene fragments or membrane proteins. Quantitative mono- and multiplexed assays have been achieved following an indirect format through a SERS-based sandwich immunoassay. Based on this review, the development of multiplex assays that incorporate the detection of RVsZO together with their specific biomarkers and/or secondary disease biomarkers resulting from the infection progress would be desirable. These configurations could be used as a double confirmation or to evaluate the health condition of the patient.

Magnetic nanoparticles in developing electrochemical sensors for pharmaceutical and biomedical applications

A revolutionary impact on the pharmaceutical and biomedical applications has been arisen in the few years to come as a result of the advances made in magnetic nanoparticles (MNPs) research. The use of MNPs opens wide opportunities in diagnostics, drug and gene delivery, in vivo imaging, magnetic separation, and hyperthermia therapy, etc. Besides, their possible integration in sensors makes them an ideal essential element of innovative pharmaceutical and biomedical applications. Nowadays, MNPs-based electrochemical sensors have attracted great attention to pharmaceutical and biomedical applications owing to their high sensitivity, stability. Selectivity towards the target as well as their simplicity of manufacture. Therefore, this review focus on recent advances with cutting-edge approaches dealing with the synthesis, design, and advantageous analytical performance of MNPs in the electrochemical sensors utilized for pharmaceutical and biomedical applications between 2015 and 2020. The challenges existing in this research area and some potential strategies/future perspectives for the rational design of electrochemical sensors are also outlined.

Rapid, Ultrasensitive, and Quantitative Detection of SARS-CoV-2 Using Antisense Oligonucleotides Directed Electrochemical Biosensor Chip

A large-scale diagnosis of the severe acute respiratory syndrome-coronavirus-2 (SARS-CoV-2) is essential to downregulate its spread within as well as across communities and mitigate the current outbreak of the pandemic novel coronavirus disease 2019 (COVID-19). Herein, we report the development of a rapid (less than 5 min), low-cost, easy-to-implement, and quantitative paper-based electrochemical sensor chip to enable the digital detection of SARS-CoV-2 genetic material. The biosensor uses gold nanoparticles (AuNPs), capped with highly specific antisense oligonucleotides (ssDNA) targeting viral nucleocapsid phosphoprotein (N-gene). The sensing probes are immobilized on a paper-based electrochemical platform to yield a nucleic-acid-testing device with a readout that can be recorded with a simple hand-held reader. The biosensor chip has been tested using samples collected from Vero cells infected with SARS-CoV-2 virus and clinical samples. The sensor provides a significant improvement in output signal only in the presence of its target-SARS-CoV-2 RNA-within less than 5 min of incubation time, with a sensitivity of 231 (copies μL-1)-1 and limit of detection of 6.9 copies/μL without the need for any further amplification. The sensor chip performance has been tested using clinical samples from 22 COVID-19 positive patients and 26 healthy asymptomatic subjects confirmed using the FDA-approved RT-PCR COVID-19 diagnostic kit. The sensor successfully distinguishes the positive COVID-19 samples from the negative ones with almost 100% accuracy, sensitivity, and specificity and exhibits an insignificant change in output signal for the samples lacking a SARS-CoV-2 viral target segment (e.g., SARS-CoV, MERS-CoV, or negative COVID-19 samples collected from healthy subjects). The feasibility of the sensor even during the genomic mutation of the virus is also ensured from the design of the ssDNA-conjugated AuNPs that simultaneously target two separate regions of the same SARS-CoV-2 N-gene.

Point-of-Care Biosensor-Based Diagnosis of COVID-19 Holds Promise to Combat Current and Future Pandemics

Efficient and rapid detection of viruses plays an extremely important role in disease prevention, diagnosis, and environmental monitoring. Early screening of viral infection among the population has the potential to combat the spread of infection. However, the traditional methods of virus detection being used currently, such as plate culturing and quantitative RT-PCR, give promising results, but they are time-consuming and require expert analysis and costly equipment and reagents; therefore, they are not affordable by people in low socio-economic groups in developing countries. Further, mass or bulk testing chosen by many governments to tackle the pandemic situation has led to severe shortages of testing kits and reagents and hence are affecting the demand and supply chain drastically. We tried to include all the reported current scenario-based biosensors such as electrochemical, optical, and microfluidics, which have the potential to replace mainstream diagnostic methods and therefore could pave the way to combat COVID-19. Apart from this, we have also provided information on commercially available biosensors for detection of SARS-CoV-2 along with the challenges in development of better diagnostic approaches. It is therefore expected that the content of this review will help researchers to design and develop more sensitive advanced commercial biosensor devices for early diagnosis of viral infection, which can open up avenues for better and more specific therapeutic outcomes.

Comprehensive Review on Current Interventions, Diagnostics, and Nanotechnology Perspectives against SARS-CoV-2

The coronavirus disease 2019 (COVID-19) has dramatically challenged the healthcare system of almost all countries. The authorities are struggling to minimize the mortality along with ameliorating the economic downturn. Unfortunately, until now, there has been no promising medicine or vaccine available. Herein, we deliver perspectives of nanotechnology for increasing the specificity and sensitivity of current interventional platforms toward the urgent need of quickly deployable solutions. This review summarizes the recent involvement of nanotechnology from the development of a biosensor to fabrication of a multifunctional nanohybrid system for respiratory and deadly viruses, along with the recent interventions and current understanding about severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2).

Graphene functionalized field-effect transistors for ultrasensitive detection of Japanese encephalitis and Avian influenza virus

Graphene, a two-dimensional nanomaterial, has gained immense interest in biosensing applications due to its large surface-to-volume ratio, and excellent electrical properties. Herein, a compact and user-friendly graphene field effect transistor (GraFET) based ultrasensitive biosensor has been developed for detecting Japanese Encephalitis Virus (JEV) and Avian Influenza Virus (AIV). The novel sensing platform comprised of carboxy functionalized graphene on Si/SiO2 substrate for covalent immobilization of monoclonal antibodies of JEV and AIV. The bioconjugation and fabrication process of GraFET was characterized by various biophysical techniques such as Ultraviolet-Visible (UV-Vis), Raman, Fourier-Transform Infrared (FT-IR) spectroscopy, optical microscopy, Scanning Electron Microscopy (SEM) and Atomic Force Microscopy (AFM). The change in the resistance due to antigen-antibody interaction was monitored in real time to evaluate the electrical response of the sensors. The sensors were tested in the range of 1 fM to 1 μM for both JEV and AIV antigens, and showed a limit of detection (LOD) upto 1 fM and 10 fM for JEV and AIV respectively under optimised conditions. Along with ease of fabrication, the GraFET devices were highly sensitive, specific, reproducible, and capable of detecting ultralow levels of JEV and AIV antigen. Moreover, these devices can be easily integrated into miniaturized FET-based real-time sensors for the rapid, cost-effective, and early Point of Care (PoC) diagnosis of JEV and AIV.

Simultaneous detection of TNOS and P35S in transgenic soybean based on magnetic bicolor fluorescent probes

A magnetic-separation-dual-targets fluorescent biosensor was fabricated to detect terminator nopaline synthase (TNOS) and promoter of cauliflower mosaic virus 35s (P35S) in transgenic soybean based on incorporation of bicolor CdTe quantum dots carried by silica nanospheres. In this protocol, the fixed probes for TNOS or P35S were magnetized firstly with Fe3O4@Au magnetic nanosphere by Au-S covalent bonding to achieve magnetized probes. Meanwhile, the capture probes for TNOS or P35S were functionalized with green or red fluorescent microspheres respectively to obtain fluorescently-labeled probes, which could emit relative strong green or red fluorescent signal. Two terminals of TNOS or P35S were recognized by magnetized probes and fluorescently-labeled probes respectively to form the sandwiched structures in the process of biosensor development subsequently, and it was separated by a magnet instantly. The fluorescence intensities of remnant supernatant were measured and analyzed accordingly to achieve simultaneous detection of TNOS and P35S. This biosensor exhibited a good dynamic range, low limit of detection and excellent selectivity in detecting transgenic soybean.

Simultaneous and automated detection of influenza A virus hemagglutinin H7 and H9 based on magnetism and size mediated microfluidic chip

Influenza viruses with multiple subtypes have highly virulent in humans, of which influenza hemagglutinin (HA) is the major viral surface antigen. Simultaneous and automated detection of multiple influenza HA are of great importance for early-stage diagnosis and operator protection. Herein, a magnetism and size mediated microfluidic platform was developed for point-of-care detection of multiple influenza HA. With multiplex microvalves and computer program control, the detection process showed high automation which had a great potential for avoiding the high-risk virus exposure to the operator. Taking advantage of magnetism and size mediated multiple physical fields, multiple influenza HA could be simultaneous separation and detection depended on different-size magnetic beads. Using high-luminance quantum dots as reporter, this assay achieved high sensitivity with a detection limit of 3.4 ng/mL for H7N9 HA and 4.5 ng/mL for H9N2 HA, and showed excellent specificity, anti-interference ability and good reproducibility. These results indicate that this method may propose new avenues for early detection of multiple influenza subtypes.

Electrochemical virus detections with nanobiosensors

Infectious diseases are caused from pathogens, which need a reliable and fast diagnosis. Today, expert personnel and centralized laboratories are needed to afford much time in diagnosing diseases caused from pathogens.

Recent progress in electrochemical studies shows that biosensors are very simple, accurate, precise, and cheap at virus detection, for which researchers find great interest in this field. The clinical levels of these pathogens can be easily analyzed with proposed biosensors. Their working principle is based on affinity between antibody and antigen in body fluids. The progress still continues on these biosensors for accurate, rapid, reliable sensors in future.

Enrichment-Stowage-Cycle Strategy for Ultrasensitive Electrochemiluminescent Detection of HIV-DNA with Wide Dynamic Range

Sensitive detection of human immunodeficiency virus DNA (HIV-DNA) is essential for timely diagnosis and cure of the illness. Herein, a novel "enrichment-stowage-cycle" strategy was proposed to fabricate a multiple amplified electrochemiluminecence (ECL) biosensor for HIV-DNA detection. On the basis of the enrichment role of magnetic nanobeads, assembly role of copolymer nanospheres and strand displacement amplification (SDA), the processes were named as "enrichment", "stowage", and "cycle", respectively. The method employed electrochemiluminescent nanospheres (ENs) as signal labels by assembling three layers of CdSe/ZnS quantum dots (QDs) onto the surface of copolymer nanospheres. Compared to QDs, the same concentration of ENs can the enhance the ECL intensity by about 11.3-fold. SDA could further amplify the signals by about 3.77-fold, possessing high sensitivity for low-abundant biomarkers detection. The integration of magnetic separation improved detection specificity and stability, making the method possible for practical application. On the basis of magnetic separation, ENs and SDA, the ECL biosensor realized ultrasensitive detection of 39.81 fM HIV-DNA, which was more sensitive than other HIV-DNA analytical methods, with a wide dynamic range of 0.05 pM to 50 nM. The successful detection of HIV-DNA in complex samples with good sensitivity and accuracy indicated its potential utilization in early judgment of diseases and fabrication of signal amplification platforms.

Integration of a 3D-printed read-out platform with a quantum dot-based immunoassay for detection of the avian influenza A (H7N9) virus

Outbreaks and potential epidemics of the highly pathogenic avian influenza virus pose serious threats to human health and the global economy. As such, its timely and accurate detection is critically important. In the present study, positive hybridoma cells (6B3) were obtained, which were used to secrete high-titer avian influenza virus (AIV) H7N9 monoclonal antibodies (H7N9 mAb). Based on these mAbs, quantum dot-based lateral flow immunochromatographic strips (QD-LFICS) were developed for AIV H7N9 detection. Under optimized conditions, results from a commercial fluorescent strip reader indicated that the limit of detection of QD-LFICS was 0.0268 HAU. To achieve rapid on-site testing, a mini 3D-printed read-out platform was fabricated to allow observation of QD-LFICS by the naked eye. More importantly, QD-LFICS were found to be practical and specific for the detection of actual samples compared with a real-time polymerase chain reaction.

Magnetic nanoparticles for smart electrochemical immunoassays: a review on recent developments

This review (with 129 refs) summarizes the progress in electrochemical immunoassays combined with magnetic particles that was made in the past 5 years. The specifity of antibodies linked to electrochemical transduction (by amperometry, voltammetry, impedimetry or electrochemiluminescence) gains further attractive features by introducing magnetic nanoparticles (MNPs). This enables fairly easy preconcentration of analytes, minimizes matrix effects, and introduces an appropriate label. Following an introduction into the fundamentals of electrochemical immunoassays and on nanomaterials for respective uses, a large chapter addresses method for magnetic capture and preconcentration of analytes. A next chapter discusses commonly used labels such as dots, enzymes, metal and metal oxide nanoparticles and combined clusters. The large field of hybrid nanomaterials for use in such immunoassays is discussed next, with a focus on MNPs composites with various kinds of graphene variants, polydopamine, noble metal nanoparticles or nanotubes. Typical applications address clinical markers (mainly blood and urine parameters), diagnosis of cancer (markers and cells), detection of pathogens (with subsections on viruses and bacteria), and environmental and food contaminants as toxic agents and pesticides. A concluding section summarizes the present status, current challenges, and highlights future trends. Graphical abstract Magnetic nanoparticles (MNP) with antibodies (Ab) capture and preconcentrate analyte from sample (a) and afterwards become magnetically (b) or immunospecifically (c) bound at an electrode. Signal either increases due to the presence of alabel (b) or decreases as the redox probe is blocked (c).

An electrochemical immunosensor for the corona virus associated with the Middle East respiratory syndrome using an array of gold nanoparticle-modified carbon electrodes

The Middle East respiratory syndrome corona virus (MERS-CoV) is highly pathogenic. An immunosensor for the determination of MERS-CoV is described here. It is based on a competitive assay carried out on an array of carbon electrodes (DEP) modified with gold nanoparticles. Recombinant spike protein S1 was used as a biomarker for MERS CoV. The electrode array enables multiplexed detection of different CoVs. The biosensor is based on indirect competition between free virus in the sample and immobilized MERS-CoV protein for a fixed concentration of antibody added to the sample. Voltammetric response is detected by monitoring the change in the peak current (typically acquired at a working potential of −0.05 V vs. Ag/AgCl) after addition of different concentrations of antigen against MERS-CoV. Electrochemical measurements using ferrocyanide/ferricyanide as a probe were recorded using square wave voltammetry (SWV). Good linear response between the sensor response and the concentrations from 0.001 to 100 ng.mL⁻¹ and 0.01 to 10,000 ng.mL⁻¹ were observed for MERS-CoV and HCoV, respectively. The assay was performed in 20 min with detection limit as low as 0.4 and 1.0 pg.mL⁻¹ for HCoV and MERS-CoV, respectively. The method is highly selective over non-specific proteins such as Influenza A and B. The method is single-step, sensitive and accurate. It was successfully applied to spiked nasal samples.

Graphical abstract

An electrochemical immunosensor for the corona virus associated with the Middle East respiratory syndrome using an array of gold nanoparticle-modified carbon electrodes

The Middle East respiratory syndrome corona virus (MERS-CoV) is highly pathogenic. An immunosensor for the determination of MERS-CoV is described here. It is based on a competitive assay carried out on an array of carbon electrodes (DEP) modified with gold nanoparticles. Recombinant spike protein S1 was used as a biomarker for MERS CoV. The electrode array enables multiplexed detection of different CoVs. The biosensor is based on indirect competition between free virus in the sample and immobilized MERS-CoV protein for a fixed concentration of antibody added to the sample. Voltammetric response is detected by monitoring the change in the peak current (typically acquired at a working potential of -0.05 V vs. Ag/AgCl) after addition of different concentrations of antigen against MERS-CoV. Electrochemical measurements using ferrocyanide/ferricyanide as a probe were recorded using square wave voltammetry (SWV). Good linear response between the sensor response and the concentrations from 0.001 to 100 ng.mL^-1 and 0.01 to 10,000 ng.mL^-1 were observed for MERS-CoV and HCoV, respectively. The assay was performed in 20 min with detection limit as low as 0.4 and 1.0 pg.mL^-1 for HCoV and MERS-CoV, respectively. The method is highly selective over non-specific proteins such as Influenza A and B. The method is single-step, sensitive and accurate. It was successfully applied to spiked nasal samples. Graphical abstract An electrochemical immunoassay is described for the Middle East Respiratory Syndrome Corona Virus (MERS-CoV). The method is based on a competitive assay carried out on a carbon array electrodes (DEP) nanostructured with gold nanoparticles. The array electrodes enable the multiplexed detection of different types of Corona Virus.

Digital Single Virus Immunoassay for Ultrasensitive Multiplex Avian Influenza Virus Detection Based on Fluorescent Magnetic Multifunctional Nanospheres

The fluorescence method has made great progress in the construction of sensitive sensors but the background fluorescence of the matrix and photobleaching limit its broad application in clinical diagnosis. Here, we propose a digital single virus immunoassay for multiplex virus detection by using fluorescent magnetic multifunctional nanospheres as both capture carriers and signal labels. The superparamagnetism and strong magnetic response ability of nanospheres can realize efficient capture and separation of targets without sample pretreatment. Due to their distinguishable fluorescence imaging and photostability, the nanospheres enable single-particle counting for ultrasensitive multiplexed detection. Furthermore, the integration of digital analysis provided a reliable quantitative strategy for the detection of rare targets. Based on multifunctional nanospheres and digital analysis, a digital single virus immunoassay was proposed for simultaneous detection of H9N2, H1N1, and H7N9 avian influenza virus without complex signal amplification, whose detection limits were 0.02 pg/mL. Owing to its good specificity and anti-interference ability, the method showed great potential in single biomolecules, multiplexed detection, and early diagnosis of diseases.

Urease-induced metallization of gold nanorods for the sensitive detection of Salmonella enterica Choleraesuis through colorimetric ELISA

We applied urease-induced silver metallization on the surface of gold nanorods (AuNR) to improve colorimetric ELISA for the rapid and sensitive detection of Salmonella enterica Choleraesuis. To this end, we introduced a biotin-streptavidin system as a bridge to determine the correlation between urease and S. enterica Choleraesuis concentrations. The captured urease can catalyze the hydrolysis of urea into carbon dioxide and ammonia, and the generated ammonia can then induce the deposition of silver shell on the surface of AuNR in the presence of silver nitrate and glucose. With the decreased aspect ratio (length divided by width) of AuNR, a multicolor change of AuNR solution and a significant blue shift in the longitudinal localized surface plasmon resonance absorption peak (Δλ_max) of AuNR were obtained at the target concentrations of 1.21 × 10¹ to 1.21 × 10⁸ cfu/mL. Consequently, the detection limits of our proposed colorimetric ELISA were as low as 1.21 × 10² cfu/mL for qualitative detection with naked eyes, and 1.21 × 10¹ cfu/mL for quantitative detection, in which changes in Δλ_max of AuNR were recorded with a microplate reader. These values were at least 2 to 3 orders of magnitude lower than those obtained with conventional horseradish peroxidase-based ELISA. The analytical performance of our developed colorimetric ELISA in terms of selectivity, accuracy, reliability, and practicability were investigated by analyzing S. enterica Choleraesuis-spiked pasteurized whole milk samples.

Recent Advances in AIV Biosensors Composed of Nanobio Hybrid Material

Since the beginning of the 2000s, globalization has accelerated because of the development of transportation systems that allow for human and material exchanges throughout the world. However, this globalization has brought with it the rise of various pathogenic viral agents, such as Middle East respiratory syndrome coronavirus (MERS-CoV), severe acute respiratory syndrome coronavirus (SARS-CoV), Zika virus, and Dengue virus. In particular, avian influenza virus (AIV) is highly infectious and causes economic, health, ethnical, and social problems to human beings, which has necessitated the development of an ultrasensitive and selective rapid-detection system of AIV. To prevent the damage associated with the spread of AIV, early detection and adequate treatment of AIV is key. There are traditional techniques that have been used to detect AIV in chickens, ducks, humans, and other living organisms. However, the development of a technique that allows for the more rapid diagnosis of AIV is still necessary. To achieve this goal, the present article reviews the use of an AIV biosensor employing nanobio hybrid materials to enhance the sensitivity and selectivity of the technique while also reducing the detection time and high-throughput process time. This review mainly focused on four techniques: the electrochemical detection system, electrical detection method, optical detection methods based on localized surface plasmon resonance, and fluorescence.

Single-step detection of norovirus tuning localized surface plasmon resonance-induced optical signal between gold nanoparticles and quantum dots

A new method of label free sensing approach with superior selectivity and sensitivity towards virlabel-freeon is presented here, employing the localized surface plasmon resonance (LSPR) behavior of gold nanoparticles (AuNPs) and fluorescent CdSeTeS quantum dots (QDs). Inorganic quaternary alloyed CdSeTeS QDs were capped with _L-cysteine via a ligand exchange reaction. Alternatively, citrate stabilized AuNPs were functionalized with 11-mercaptoundecanoic acid to generate carboxylic group on the gold surface. The carboxylic group on the AuNPs was subjected to bind covalently with the amine group of _L-cysteine capped CdSeTeS QDs to form CdSeTeS QDs/AuNPs nanocomposites. The fluorescence of CdSeTeS QDs/AuNPs nanocomposite shows quenched spectrum of CdSeTeS QDs at 640 nm due to the close interaction with AuNPs. However, after successive addition of norovirus-like particles (NoV-LPs), steric hindrance-induced LSPR signal from the adjacent AuNPs triggered the fluorescence enhancement of QDs in proportion to the concentration of the target NoV-LPs. A linear range of 10^-14 to 10^-9 g mL^-1 NoV-LPs with a detection limit of 12.1 × 10^-15 g mL^-1 was obtained. This method was further applied on clinically isolated norovirus detection, in the range of 10²-10⁵ copies mL^-1 with a detection limit of 95.0 copies mL^-1, which is 100-fold higher than commercial ELISA kit. The superiority of the proposed sensor over other conventional sensors is found in its ultrasensitive detectability at low virus concentration even in clinically isolated samples. This proposed detection method can pave an avenue for the development of high performance and robust sensing probes for detection of virus in biomedical applications.

Digital Single Virus Electrochemical Enzyme-Linked Immunoassay for Ultrasensitive H7N9 Avian Influenza Virus Counting

Electrochemistry has been widely used to explore fundamental properties of single molecules due to its fast response and high specificity. However, the lack of efficient signal amplification strategies and quantitative method limit its clinical application. Here, we proposed a digital single virus electrochemical enzyme-linked immunoassay (digital ELISA) for H7N9 avian influenza virus (H7N9 AIV) counting by integration of digital analysis, bifunctional fluorescence magnetic nanospheres (bi-FMNs) with monolayer gold nanoparticles (Au NPs) modified microelectrode array (MA). Bi-FMNs are fabricated by coimmobilizing polyclonal antibody (pAb) and alkaline phosphatase (ALP). At most, one target will be captured per bi-FMNs by controlling the proportion of bi-FMNs to target concentrations (≥5:1). The introduction of digital analysis can solve signal fluctuation and the reliability of single virus detection, enabling the digital ELISA to be sensitively and accurately applied for H7N9 AIV detection with a low detection limit of 7.8 fg/mL, which is greatly promising in single biomolecular detection, early diagnosis of disease, and practical application.

Towards the electrochemical diagnostic of influenza virus: development of a graphene–Au hybrid nanocomposite modified influenza virus biosensor based on neuraminidase activity

An effective electrochemical influenza A biosensor based on a graphene–gold (Au) hybrid nanocomposite modified Au-screen printed electrode has been developed.

Advanced nanotechnologies in avian influenza: Current status and future trends - A review

In the last decade, the control of avian influenza virus has experienced many difficulties, which have caused major global agricultural problems that have also led to public health consequences. Conventional biochemical methods are not sufficient to detect and control agricultural pathogens in the field due to the growing demand for food and subsidiary products; thus, studies aiming to develop potent alternatives to conventional biochemical methods are urgently needed. In this review, emerging detection systems, their applicability to diagnostics, and their therapeutic possibilities in view of nanotechnology are discussed. Nanotechnology-based sensors are used for rapid, sensitive and cost-effective diagnostics of agricultural pathogens. The application of different nanomaterials promotes interactions between these materials and the virus, which enables researchers to construct portable electroanalytical biosensing analyser that should effectively detect the influenza virus. The present review will provide insights into the guidelines for future experiments to develop better techniques to detect and control influenza viruses.

Magnetic bead-based mimic enzyme-chromogenic substrate and silica nanoparticles signal amplification system for avian influenza A (H7N9) optical immunoassay

Schematic illustration of the principle of the (a) colorimetric MB–MEMSCI and (b) optical MB–MEMSCI for rapid detection of H7N9 AIV.

Ultrasensitive detection of influenza viruses with a glycan-based impedimetric biosensor

An ultrasensitive impedimetric glycan-based biosensor for reliable and selective detection of inactivated, but intact influenza viruses H3N2 was developed. Such glycan-based approach has a distinct advantage over antibody-based detection of influenza viruses since glycans are natural viral receptors with a possibility to selectively distinguish between potentially pathogenic influenza subtypes by the glycan-based biosensors. Build-up of the biosensor was carefully optimized with atomic force microscopy applied for visualization of the biosensor surface after binding of viruses with the topology of an individual viral particle H3N2 analyzed. The glycan biosensor could detect a glycan binding lectin with a limit of detection (LOD) of 5 aM. The biosensor was finally applied for analysis of influenza viruses H3N2 with LOD of 13 viral particles in 1 μl, what is the lowest LOD for analysis of influenza viral particles by the glycan-based device achieved so far. The biosensor could detect H3N2 viruses selectively with a sensitivity ratio of 30 over influenza viruses H7N7. The impedimetric biosensor presented here is the most sensitive glycan-based device for detection of influenza viruses and among the most sensitive antibody or aptamer based biosensor devices.

ELISA-like Analysis of Cisplatinated DNA Using Magnetic Separation

Cisplatin belongs to the most widely used cytostatic drugs. The determination of the presence of the DNA-cisplatin adducts may not only signal the guanine-rich regions but also monitor the interaction reaction between DNA and the drug in terms of speed of interaction.

In this work, the combined advantages of magnetic particles-based isolation/purification with fluorescent properties of quantum dots (QDs) and antibodies targeted on specific recognition of DNA-cisplatin adducts are demonstrated. The formation of a complex between magnetic particles with surface modified by anti-dsDNA antibody, cisplatin-modified DNA and QDs labelled anti-cisplatin-modified DNA antibody was suggested and optimized.