A novel FRET ‘off–on’ fluorescent probe for the selective detection of Fe 3+ , Al 3+ and Cr 3+ ions: Its ultrafast energy transfer kinetics and application in live cell imaging

Developing portable and controllable fluorescence capillary imprinted sensor for visual detection Crohn's disease biomarkers

Simultaneous detection of multiple biomarker levels is essential to improve the accuracy of early diagnosis. Introducing capillary will simplify procedure, less time, and reduce reagent consumption for point-of-care testing of biomarkers. Here, we developed a portable and controllable smartphone-integrated fluorescence capillary imprinted sensing platform for the accuracy visual detection of Crohn's disease biomarkers (lysozyme, Fe3+) using single-excitation/double-signal detection. A novel controllable capillary coating strategy was developed by static gas-driven coating method for synthesis uniform fluorescence capillary imprinted sensor (Si-CD/g-CdTe@MIP capillary sensor). When Fe3+ and lysozyme were added, the fluorescence intensity of Si-CD/g-CdTe@MIP capillary sensor was quenched at 426 nm and enhanced at 546 nm, respectively. This Si-CD/g-CdTe@MIP capillary sensor has high sensitivity and selectivity for quantification lysozyme and Fe3+ simultaneously with the detection limit of 0.098 nM and 0.20 nM, respectively. In addition, the smartphone-integrated Si-CD/g-CdTe@MIP capillary sensor was applied for the intelligent detection of lysozyme and Fe3+, in which the detection limit was calculated as 0.32 nM and 0.65 nM. The smartphone-integrated visual Si-CD/g-CdTe@MIP capillary sensor realized ultrasensitive microanalysis (18 μL/time) of biomarkers in health man and Crohn 's patients, providing a novel strategy for early diagnosis of Crohn 's disease.

A "turn off-on" fluorescent sensor for detection of Cr(Ⅵ) based on upconversion nanoparticles and nanoporphyrin

Hexavalent chromium (Cr(Ⅵ)) is a significant environmental pollutant because of its toxic and carcinogenic properties and wide use in various industries. Hence, there is an urgent need to develop accurate and selective approaches to detect the concentration of Cr(Ⅵ) in agricultural and aquaculture products to help humans avoid potential hazards of indirectly taking in Cr(Ⅵ). In this work, we report a "turn off-on" fluorescent sensor based on citric acid coated, 808 nm-excited core-shell upconversion nanoparticles (CA-UCNPs) and self-assembled copper porphyrin nanoparticles (nano CuTPyP) for sensitive and specific detection of Cr(Ⅵ). Nano copper 5, 10, 15, 20-tetra(4-pyridyl)-21H-23H- porphine obtained by acid-base neutralization micelle-confined self-assembly method function as an effective quencher due to its excellent optical property and water solubility. Through electrostatic interactions, positively charged nano CuTPyP are attracted to the surface of negatively charged CA-UCNPs, which can almost completely quench the fluorescence emission. In the presence of Cr(Ⅵ), nano CuTPyP can discriminatively interact with Cr(Ⅵ) and form nano CuTPyP/Cr(Ⅵ) complex, which separates nano CuTPyP from CA-UCNPs and restores the fluorescence. The sensing system exhibits a good linear response to Cr(Ⅵ) concentration in the range from 0.5 to 400 µM with a detection limit of 0.36 µM. The sensing method also displays high selectivity against other common ions including trivalent chromium and is applied to the analysis of Cr(Ⅵ) in actual rice and fish samples with satisfactory results.

Exploitation of a 1D coordination polymer as a portable kit for an eye-catching fluorometric response towards sensing of trivalent cations

The development and utilization of coordination polymers (CPs) have drawn interest for potential applications in different fields. Detection of metal ions in efficient and selective manners is an important field of research. It paves the way to protect human health by balancing toxic metal ions and biologically active metal ions in the atmosphere. In this regard, a new one-dimensional (1D) 4-(1-naphthylvinyl)pyridine (4-nvp) based CP [Cd(NCS)2(4-nvp)2]n (1) was synthesized and characterized structurally by single-crystal X-ray diffraction. Interestingly, this 1D CP underwent supramolecular aggregation via π⋯π stacking interactions, which specifically generated an environment for a potent "turn on" response in the presence of trivalent cations (Fe3+, Al3+, and Cr3+) in the nanomolar range but remained silent in the presence of other metal ions. Density functional theory (DFT) computations and X-ray photoelectron spectroscopy (XPS) were performed to establish the sensing phenomena. Fascinatingly, utilizing the sensitivity of 1 in an aqueous medium, a hands-on portable cotton swab kit was developed for instant identification of these three important trivalent metal cations.

A simple 'turn-on' fluorescence chemosensor for Al(iii) detection in aqueous solution and solid matrix

A simple fluorescence chemosensor of FHS-OH based on salicylaldehyde Schiff base was developed via a one-step reaction, which achieved a fast and highly selective response for Al(iii). Mechanism studies showed that when FHS-OH was exposed to Al(iii) with 1 : 2 binding stoichiometry in an aqueous solution at neutral pH, C[double bond, length as m-dash]N isomerization and PET processes were limited, resulting in a 'turn-on' fluorescence response with a low detection limit of 63 nmol L-1 and a satisfying linear range of 0.0-20.0 μmol L-1. Compared to traditional detection methods for Al(iii), fluorometry using FHS-OH has several advantages, including simplicity, quick response, and capability of real-time detection. More importantly, the detection of Al(iii) on a solid matrix (test paper) was successfully achieved. After the addition of Al(iii), a significant emission colour change from green to bright blue was observed by the naked eye owing to the intrinsic aggregation-induced emission (AIE) characteristic of FHS-OH.

Recent developments in the creation of a single molecular sensing tool for ternary iron (III), chromium (III), aluminium (III) ionic species: A review

Rational design of a molecular sensing tool is an important topic in molecular recognition, signalling, and optoelectronics that has piqued the interest of chemists, biologists, and environmental scientists. Approximately 150 years have passed since the beginning of the fluorescent chemosensor sector. Due to the paramagnetic properties of Cr3+ and Al3+ , it is tough to prepare a photoluminescence plug-in detector. Most dye-based Al3+ sensors must be utilized in organic or mixed solvents for robust hydration of Al3+ in water. The sophisticated molecular design of sensors, conversely, allows for the detection of these metal ions in aqueous medium. The design of chemosensors using various fluorophores and their mechanisms of action have been thoroughly discussed. A literature survey covering the design of chemosensors and their mechanisms of action have been thoroughly discussed covering the period 2010-2022 and that was carried out including innovative and exemplary activities from numerous groups throughout the world that have significantly contributed to this sector. The most important advantages of these probes are their aqueous solubility and quick response with outstanding selectivity and sensitivity for temporal distribution with high fidelity of metals in living cells.

A mitochondria-targeted fluorescent probe based on biocompatible RBH-U for the enhanced response of Fe3+ in living cells and quenching of Cu2+ in vitro

A rhodamine hydrazide conjugating uridine moiety (RBH-U) is firstly synthesized by screening different synthetic routes, and then developed as a fluorescence probe for selective detection of Fe³⁺ ions in an aqueous solution, accompanied by visual color change with naked eyes. Upon the addition of Fe³⁺ in a 1:1 stoichiometry, a 9-fold enhancement in the fluorescence intensity of the RBH-U was observed with an emission wavelength of 580 nm. In the presence of other metal ions, the "turn-on" fluorescent probe with pH-independent (value 5.0 to 8.0) is remarkably specific for Fe³⁺ with a detection limit as low as 0.34 μM. Further, the enhanced fluorescence intensity of RBH-U- Fe³⁺ can be quenched as a switch-off sensor to assist in the recognition of Cu²⁺ ions. Additionally, the colocalization assay demonstrated that RBH-U containing uridine residue can be used as a novel mitochondria-targeted fluorescent probe with rapid reaction time. Cytotoxicity and cell imaging of RBH-U probe in live NIH-3T3 cells suggest that it can be a potential candidate for clinical diagnosis and Fe³⁺ tracking toll for the biological system due to its biocompatibility and nontoxicity in NIH-3T3 cells even up to 100 μM.

Synthesis and photophysical investigation of Schiff base as a Mg2+ and Zn2+ fluorescent chemosensor and its application

In view of the fluorescent switching properties and anti-fatigue properties of diarylethene, a diarylethene fluorescent chemosensor for the immediate detection of zinc ion (Zn²⁺ ) and magnesium ion (Mg²⁺ ) in acetonitrile was synthesized in this article. The structure of 1o was determined by performing spectroscopy and elemental analysis. The presence of Zn²⁺ or Mg²⁺ made the chemosensor 1o show an obvious "turn-on" fluorescent signal (bright yellow-green for Mg²⁺ and bright cyan for Zn²⁺ ). The fluorescent change caused by the 1:1 binding of 1o and Zn²⁺ or Mg²⁺ might be due to hindering the excited-state intramolecular proton transfer (ESIPT) process, which were bolstered by Benesi-Hildebrand analysis, Job's plot curves, proton nuclear magnetic resonance (¹ H-NMR) titration and mass spectrometry. The limits of detection were acquired from the standard curve plots for Mg²⁺ at 44.6 nM and for Zn²⁺ at 14 nM. Based on the fluorescent behaviors, a logic gate was constructed with the emission intensity at 528/518 nm as output signal, the ultraviolet-visible (UV-vis) lights, Mg²⁺ /Zn²⁺ and EDTA as input signals. Exogenous Zn²⁺ and Mg²⁺ fluorescent bioimaging were performed on Hela cells with 1o, indicating its potential application in biodiagnostic analysis. In particular, 1o was manufactured into test paper, and Zn²⁺ or Mg²⁺ can be conveniently, efficiently and qualitatively identified by the fluorescent color variation of the test strips.

A novel highly selective FRET sensor for Fe(III) and DFT mechanistic evaluation

A novel FRET-based sensor has been designed and developed through the conjugation of naphthyl and rhodamine via propylamine spacer, Naph-Rh. The naphthyl moiety serves as a FRET donor due to its emission spectrum overlapping with the rhodamine B absorption band. Naph-Rh exhibited a selectivity for sensing Fe³⁺ over other metal ions with a visual color change and fluorescent enhancement. The ratio of the Naph-Rh and Fe³⁺ was determined to be 1:1 based on Job's plot analysis with a detection limit of 83 nM. The probe exhibited a linear response to Fe³⁺ in the range of 0-120 μM. Furthermore, the density functional theory (DFT) calculations of Naph-Rh were carried out to rationalize the design and portray the plausible Fe³⁺ sensing mechanism.

A novel double target fluorescence probe for Al3+/Mg2+ detection with distinctively different responses and its applications in cell imaging

The metal cations, Al³⁺ and Mg²⁺, could affect human health and cell biological processes. Their fast and selective detection using one probe remains a challenge. A novel fluorescence probe, N'-((1-hydroxynaphthalen-2-yl)methylene)isoquinoline-3-carbohydrazide (NHMI), was developed for selectively monitoring Al³⁺ and Mg²⁺. The probe NHMI showed a distinctive "turn-on" fluorescence signal towards Al³⁺ and Mg²⁺ (cyan for Al³⁺ with 2556-folds enhancement and yellow for Mg²⁺ with 88-folds enhancement), which is quite distinct from other metal cations and allows for naked-eye detection. This interesting response was attributed to the influence of PET, ESIPT process and CHEF effect, when Al³⁺ or Mg²⁺ chelated with NHMI. Furthermore, the fluorescence titration experiments manifested that the detection limit of probe NHMI for Al³⁺/Mg²⁺ was as low as 1.20 × 10^-8 M and 7.69 × 10^-8 M, respectively. The formed complexes NHMI-Al³⁺ and NHMI-Mg²⁺ were analyzed by Job's plot, ESI-MS, ¹H NMR and FT-IR. The coordination pockets and fluorescence mechanisms of two metal complexes were explored by density functional theory calculation. Moreover, NHMI showed low cytotoxicity and good cell permeability. Fluorescence bioimaging of Al³⁺/Mg²⁺ in MCF-7 cells with NHMI indicated its potential application in biological diagnostic analysis.

Controllable FRET Behaviors of Supramolecular Host-Guest Systems as Ratiometric Aluminum Ion Sensors Manipulated by Tetraphenylethylene-Functionalized Macrocyclic Host Donor and Multistimuli-Responsive Fluorescein-Based Guest Acceptor

The novel multistimuli-responsive monofluorophoric supramolecular polymer Poly(TPE-DBC)/FL-DBA and pseudo[3]rotaxane TPE-DBC/FL-DBA consisted of the closed form of nonemissive fluorescein guest FL-DBA along with TPE-based main-chain macrocyclic polymer Poly(TPE-DBC) and TPE-functionalized macrocycle TPE-DBC hosts, respectively. By the combination of various external stimuli, these fluorescent supramolecular host-guest systems could reveal interesting photoluminescence (PL) properties in DMF/H₂O (1:1, v/v) solutions, including bifluorophoric host-guest systems after the complexation of Al³⁺ ion, i.e., TPE-DBC/FL-DBA-Al³⁺ and Poly(TPE-DBC)/FL-DBA-Al³⁺ with their corresponding open form of fluorescein guest FL-DBA-Al³⁺. Importantly, the Förster resonance energy transfer (FRET) processes occurred in both bifluorophoric host-guest systems between blue-emissive TPE donors (λ_em = 470 nm) and green-emissive fluorescein acceptors (λ_em = 527 nm) after aluminum detection, which were further verified by time-resolved photoluminescence (TRPL) measurements to acquire their FRET efficiencies of 40.4 and 31.1%, respectively. Both supramolecular host-guest systems exhibited stronger green fluorescein emissions as well as appealing ratiometric PL behaviors within the desirable donor-acceptor distances of FRET processes in comparison with their detached analogous mixtures. Regarding the pH effects, the optimum green fluorescein emissions with effective FRET processes of all compounds and host-guest systems were sustained in the range pH = 7-10. Interestingly, both host-guest systems TPE-DBC/FL-DBA and Poly(TPE-DBC)/FL-DBA possessed high sensitivities and selectivities toward aluminum ion to display their strong green emissions via FRET-ON behaviors due to the chelation-induced ring opening of spirolactam moieties to become green-emissive guest acceptor FL-DBA-Al³⁺, which offered excellent limit of detection (LOD) values of 50.61 and 38.59 nM, respectively, to be further applied for the fabrication of facile test strips toward aluminum detection. Accordingly, the inventive ratiometric PL and FRET sensor approaches of supramolecular host-guest systems toward aluminum ion with prominent sensitivities and selectivities were well-established in this study.

Highly selective and sensitive chemosensor for Al(III) based on isoquinoline Schiff base

As a colorimetric and fluorescent turn-on sensor to Al³⁺, N'-(2-hydroxybenzylidene)isoquinoline-3-carbohydrazide (HL) has been easily synthesized. The fluorescence intensity increases by 273 times in the presence of Al³⁺ at 458 nm. Meanwhile, the experiment data indicate that the limit of detection for Al³⁺ is 1.11 × 10^-9 M. Remarkably, the blue fluorescence signal of HL-Al³⁺ could be specially observed by the naked eye under UV light and is significantly different from those of other metal ions. Fluorescence switch based on the control of Al³⁺ and EDTA proved HL could act as a reversible chemosensor. According to ESI-MS result and the Job's plots, the 2:1 coordination complex formed by HL and Al³⁺ could be produced. Density functional theory calculations were performed to illustrate the structures of HL and complex. The cell imaging experiment indicates that HL can be applied for monitoring intracellular Al³⁺ levels in cells.

Thiophene-phenylquinazoline probe for selective ratiometric fluorescence and visual detection of Fe(iii) and turn-off fluorescence for I- and its applications

A 2,5-bis(4-phenylquinazolin-2-yl)thiophene (BQT) probe is designed, synthesized and explored for selective ratiometric fluorescence and visual detection of Fe³⁺ and as a turn-off fluorescence probe for I^- anion. BQT is colorless and has blue emission in CH₃CN solution. BQT selectively complexes with Fe³⁺, turns its solution from colorless to greenish yellow and enables the ratiometric sensing of Fe³⁺ with limit of detection (LOD) and limit of quantitation (LOQ) of 2 × 10^-8 M and 6.1 × 10^-8 M, respectively. Binding constant of BQT with Fe³⁺ is found to be 4.1 × 10^-4 M^-1. BQT is also able to sense I^- anion present in aqueous solution by selectively turning colorless to yellow and fluorescence quenching with a LOD of 1.7 × 10^-7 M and LOQ of 5.2 × 10^-7 M. BQT sensing ability is not influenced by the presence of other metal ions and anions in the vicinity. The BQT-Fe³⁺ complex is thoroughly characterized using MALDI-TOF, NMR and Job's plot. A reversibility experiment with EDTA suggests BQT is a reversible fluorescent chemosensor for Fe³⁺ ions. The spectroscopic data of BQT and its complexes are employed to construct a field test kit for qualitative analysis and INHIBIT logic gate.

A phosphorescence "turn-on" probe for the detection and imaging of Al3+ based on aggregation-induced emission

Aggregation-induced emission luminogens (AIEgens) have been widely used to design fluorescent probes for chemosensing and bioimaging. However, it is still challenging to design long-lived AIE-active probes due to the lack of aggregation-induced phosphorescence (AIP) luminogens. In this work, we design and synthesize a long-lived molecular probe with aggregation-induced phosphorescence property for aluminum ion-specific detection by introducing multiple carboxylic acid groups in a unique twisted molecular skeleton, and develop a first phosphorescent detection method for aluminum ion based on aggregation-induced emission mechanism. The introduction of six carboxylic acid groups into the probe not only significantly enhances the water-solubility but also provides specific recognition unit for aluminum ions via complexation. The probe shows a very sharp emission enhancement in the presence of aluminum ions via aluminum ion-triggered aggregation-induced emission. The cytotoxicity test of the probe shows its biocompatible nature, and further imaging results in live human cells and roots of live Arabidopsis thaliana demonstrates that the designed AIP-active probe is capable of monitoring aluminum ions in complex biological systems. This work proposes a general design strategy for AIP-active probes, and provides valuable use of these AIP-active probes in bioimaging.

Synthesis and characterization for a highly selective bis(salamo)-based chemical sensor and imaging in living cell

A new sensor H₅L for continuous identification of Cu²⁺, Al³⁺ and lysine was synthesized by Schiff base reactions. The sensor could specifically recognized Cu²⁺ in the EtOH/H₂O (1:1 v/v) solution by UV-vis spectra, and the binding constant with Cu²⁺ can reach 10¹¹ M^-1, meanwhile, it was found by the naked-eye that the color of the solution was changed from colorless to yellow. The copper complex L-Cu²⁺ formed by the sensor H₅L and Cu²⁺ could further recognize Al³⁺ and lysine in the fluorescence spectra. The LOD values of the three objects were 2.67 × 10^-8, 1.96 × 10^-8 and 5.59 × 10^-9 M, respectively. In addition, fluorescence intracellular images of Al³⁺ and lysine were performed and obtained satisfactory results.

Novel insights on targeting ferroptosis in cancer therapy

Ferroptosis belongs to a novel form of regulated cell death. It is characterized by iron dependence, destruction of intracellular redox balance and non-apoptosis. And cellular structure and molecules level changes also occur abnormally during ferroptosis. It has been proved that ferroptosis exist widespreadly in many diseases, such as heart disease, brain damage or alzheimer disease. At the same time, the role of ferroptosis in cancer cannot be underestimated. More and more indications have told that ferroptosis is becoming a powerful weapon against cancer. In addition, therapies rely on ferroptosis have been applied to the clinic. Therefore, it is necessary to understand this newly discovered form of cell death and its connection with cancer. This review summarizes the mechanism of ferroptosis, ferroptosis inducers based on different targets and inspection methods. At last, we analyzed the relationship between ferroptosis and malignancies, in order to provide a novel theory basis for cancer treatment.

A novel "off-on" rhodamine-based colorimetric and fluorescent chemosensor based on hydrolysis driven by aqueous medium for the detection of Fe3

A novel "off-on" colorimetric and fluorescent chemosensor N²,N⁶-bis(2-(rhodamine B amido)ethyl)pyridine-2,6-dicarboxamide (RhBEP) has been designed and synthesized, which can selectively detect the presence of Fe³⁺ with about 75-fold enhancement in fluorescence emission intensity at 585 nm over various environmentally relevant metal cations such as Hg²⁺, Cu²⁺, Cr³⁺, Li⁺, Na⁺, K⁺, Ag⁺, Zn²⁺, Mg²⁺, Ca²⁺, Ba²⁺, Fe²⁺, Cd²⁺, Ni²⁺, Mn²⁺, Al³⁺, Bi³⁺ and Au³⁺ in PBS reaction media. The remarkable color change from UV-Vis titration experiments indicates that RhBEP can be used as a colorimetric chemosensor for Fe³⁺. The ultrasensitive detection limit for Fe³⁺ in the fluorescence measurement is down to 2.0 × 10^-8 mol·L^-1. The recognition mechanism of RhBEP to Fe³⁺ was analyzed by Job's plot and mass spectrometry analysis. In addition, the data from fluorescent cell imaging experiments confirmed that the chemosensor RhBEP has a promising application for the detection of Fe³⁺ in biological systems.

Study on synthesis and fluorescence property of rhodamine-naphthalene conjugate

In this study, a novel ligand (HL) consisting of 2-methyl quinoline-4-carboxylic acid, rhodamine and naphthalene moiety, was designed and synthesized, it could be developed a ratiometric fluorescent sensor for selective detection of Al³⁺ via fluorescence resonance energy transfer (FRET) from naphthalimide moiety to rhodamine moiety. The addition of Al³⁺ trigger the significant fluorescence enhancement of HL at 550 nm at the expense of the fluorescent emission of HL centered at 524 nm.

Dual sensing and synchronous fluorescence spectroscopic monitoring of Cr3+and Al3+ using a luminescent Schiff base: Extraction and DFT studies

A well designed, new pyrene based small molecule (L) was synthesized from 1:1 condensation reaction of 1-aminopyrene and 6-(1,3-benzodioxal-5-yl)-2-pyridine carboxaldehyde which was characterized by absorption, emission spectrometry, FTIR, NMR and mass studies. Interestingly the UV-vis and fluorescence spectroscopic studies revealed that the ligand (L) works as a dual turn-on luminescent chemosensor for chromium(III) (Cr³⁺) and aluminium(III) (Al³⁺) in aqueous environment which were further supported by DFT and TDDFT studies. L shows a significant colour change from pale yellow to reddish yellow with a detection limit of ~10^-9 M in the presence of Cr³⁺ and Al³⁺ whereas there were no noteworthy changes in the presence of other monovalent and divalent metal ions. The molecular signaling in the presence of Cr³⁺, Al³⁺, Fe³⁺ and EDTA was compared with advanced level combinational INHIBIT gate based on 4 input logic gates. Herein, first derivative constant wavelength synchronous fluorescence spectroscopy (1^st DCWSFS) was applied for the determination of Cr³⁺, Al³⁺ ion concentrations in a mixture via increment of spectral resolution of the respective overlapping peaks. 1^st DCWSFS is reported to be used in pharmaceuticals but very few works have been done for determination of metal ion concentration in environmental sample without prior separation. The individual Cr³⁺and Al³⁺ ion concentrations in a mixture were determined through liquid-liquid extraction process and the efficiencies were compared with 1^st derivative SFS method. It was observed that 1^st derivative SFS process is more efficient than conventional liquid-liquid extraction process. Therefore, 1^st DCWSFS method using sensor L might be useful as a diagnostic tool for detection of individual metal ion concentrations (Cr³⁺ and Al³⁺) from a mixture which will be cost-effective, time saving and more precise.

Triazatruxene-Rhodamine-Based Ratiometric Fluorescent Chemosensor for the Sensitive, Rapid Detection of Trivalent Metal Ions: Aluminium (III), Iron (III) and Chromium (III)

We investigated the ability of a novel triazatruxene-rhodamine-based (TAT-ROD) chemosensor to detect the trivalent metal ions aluminium (Al³⁺), iron (Fe³⁺) and chromium (Cr³⁺). Operating via the through-bond energy transfer (TBET) pathway, the chemosensor exhibited low detection limits of 23.0, 25.0 and 170.0 nM for Al³⁺, Fe³⁺ and Cr³⁺, respectively, along with high sensitivity and selectivity during a brief period (<15 s). The binding ratio of the chemosensor and trivalent metal ions achieved by Job's method was 3:1, and when we added ethylenediaminetetraacetic acid (EDTA), the sensing process reversed. Altogether, our TAT-ROD chemosensor marks the first triazatruxene-based colorimetric and fluorometric metal ion sensor reported in the literature.

Detection of Al3+ and Fe3+ ions by nitrobenzoxadiazole bearing pyridine-2,6-dicarboxamide based chemosensors: effect of solvents on detection

Hybrid chemosensors, based on a pyridine-2,6-dicarboxamide fragment while containing a 4-nitrobenzoxadiazole group, are used for the sensing of Al³⁺ and Fe³⁺ ions where detection was significantly controlled by the selection of a solvent.

Luminescence sensing, DFT, extraction and monitoring of Cr3+ and Al3+via the application of first derivative fluorescence spectroscopy

Turn-on recognition of an anthracene-based Schiff base followed by the use of a sensitive technique for metal estimation without prior separation.

Current Scenario of Pb Toxicity in Plants: Unraveling Plethora of Physiological Responses

Lead (Pb) is an extremely toxic metal for all living forms including plants. It enters plants through roots from soil or soil solution. It is considered as one of the most eminent examples of anthropogenic environmental pollutant added in environment through mining and smelting of lead ores, coal burning, waste from battery industries, leaded paints, metal plating, and automobile exhaust. Uptake of Pb in plants is a nonselective process and is driven by H⁺/ATPases. Translocation of Pb metal ions occurs by apoplastic movement resulting in deposition of metal ions in the endodermis and is further transported by symplastic movement. Plants exposed to high concentration of Pb show toxic symptoms due to the overproduction of reactive oxygen species (ROS) through Fenton-Haber-Weiss reaction. ROS include superoxide anion, hydroxyl radical, and hydrogen peroxide, which reach to macro- and micro-cellular levels in the plant cells and cause oxidative damage. Plant growth and plethora of biochemical and physiological attributes including plant growth, water status, photosynthetic efficiency, antioxidative defense system, phenolic compounds, metal chelators, osmolytes, and redox status are adversely influenced by Pb toxicity. Plants respond to toxic levels of Pb in varied ways such as restricted uptake of metal, chelation of metal ions to the root endodermis, enhancement in activity of antioxidative defense, alteration in metal transporters expression, and involvement of plant growth regulators.

A lysosome-targetable fluorescent probe for imaging trivalent cations Fe3+, Al3+ and Cr3+ in living cells

An effective morpholine-type naphthalimide chemsensor, N-p-chlorophenyl-4-(2-aminoethyl)morpholine-1,8-naphthalimide (CMN) has been developed as a lysosome-targeted fluorometric sensor for trivalent metal ions (Fe³⁺, Al³⁺ and Cr³⁺). Upon the addition of Fe³⁺, Al³⁺ or Cr³⁺ ions, the probe CMN showed an evident naked-eye color changes which pale yellow solution of CMN turned deepened and it displayed turn-on fluorescence response in methanol. CMN showed a significant selective and sensitive toward Fe³⁺, Al³⁺ or Cr³⁺ ions, while there was no obvious behavior to other monovalent or divalent metal ions from the UV-vis and fluorescence spectrum. Based on the Job's plot analyses the 1:1 coordination mode of CMN with Fe³⁺, Al³⁺ or Cr³⁺ was proposed. The limit of detection (LOD) observed were 0.65, 0.69 and 0.68 μM for Fe³⁺, Al³⁺ and Cr³⁺ ions, respectively. The N-atom of morpholine directly involved in complex formation, CMN emitted fluorescence through inhibition of photoinduced electron transfer (PET). This probe exhibited excellent imaging ability for Fe³⁺, Al³⁺and Cr³⁺ ions in living cells with low cytotoxicity. Significantly, the cellular confocal microscopic research indicated that the lysosome-targeted group of morpholine moiety was introduced which realized the capability of imaging lysosomal trivalent metal ions in living cells for the first time.

Novel Diarylethene-Based Fluorescent Switching for the Detection of Al3+ and Construction of Logic Circuit

A novel photochromic diarylethene was synthesized successfully containing a phthalazine unit. Its multistate fluorescence switching properties were investigated by stimulating with UV/vis lights and Al3+/EDTA. The synthesized diarylethene displayed excellent selectivity to Al3+ with a distinct fluorescence change, revealing that it could be used as a sensor for fluorescence identification of Al3+, and a logic circuit was constructed by utilizing this diarylethene molecular platform. Moreover, it also exhibited a high accuracy for the determination of Al3+ in practical water samples.

Recent Advances on Iron(III) Selective Fluorescent Probes with Possible Applications in Bioimaging

Iron(III) is well-known to play a vital role in a variety of metabolic processes in almost all living systems, including the human body. However, the excess or deficiency of Fe3+ from the normal permissible limit can cause serious health problems. Therefore, novel analytical methods are developed for the simple, direct, and cost-effective monitoring of Fe3+ concentration in various environmental and biological samples. Because of the high selectivity and sensitivity, fast response time, and simplicity, the fluorescent-based molecular probes have been developed extensively in the past few decades to detect Fe3+. This review was narrated to summarize the Fe3+-selective fluorescent probes that show fluorescence enhancement (turn-on) and ratiometric response. The Fe3+ sensing ability, mechanisms along with the analytical novelties of recently reported 77 fluorescent probes are discussed.

A simple turn-on ESIPT and PET-based fluorescent probe for detection of Al3+ in real-water sample

Aluminum is known as the most ubiquitous metal in earth's crust but its excessive exposure will cause damage to environment and health of the organism. Here, a turn-on Schiff base fluorescence probe STH based on excited state intramolecular proton transfer and photoelectron transfer processes for Al³⁺ detection with fast response rate (within minutes), low detection limit (4.26×10^-8M), high selectivity and reasonable pH application range (5.0-8.0) was developed. Fluorescence titration experiments show that probe STH has an excellent linear relationship (R²=0.9694) with Al³⁺ concentration and could be applied to quantitatively recognize Al³⁺ in real-water samples. Based on Job's plot and in situ mass spectra, two STH molecules will complex with Al³⁺ to form 2:1 complexation with oxygen atoms of hydroxyl and carbonyl groups and nitrogen atom of CN bond participating in coordination.

Cell-based biosensors: Recent trends, challenges and future perspectives

Existing at the interface of biology and electronics, living cells have been in use as biorecognition elements (bioreceptors) in biosensors since the early 1970s. They are an interesting choice of bioreceptors as they allow flexibility in determining the sensing strategy, are cheaper than purified enzymes and antibodies and make the fabrication relatively simple and cost-effective. And with advances in the field of synthetic biology, microfluidics and lithography, many exciting developments have been made in the design of cell-based biosensors in the last about five years. 3D cell culture systems integrated with electrodes are now providing new insights into disease pathogenesis and physiology, while cardiomyocyte-integrated microelectrode array (MEA) technology is set to be standardized for the assessment of drug-induced cardiac toxicity. From cell microarrays for high-throughput applications to plasmonic devices for anti-microbial susceptibility testing and advent of microbial fuel cell biosensors, cell-based biosensors have evolved from being mere tools for detection of specific analytes to multi-parametric devices for real time monitoring and assessment. However, despite these advancements, challenges such as regeneration and storage life, heterogeneity in cell populations, high interference and high costs due to accessory instrumentation need to be addressed before the full potential of cell-based biosensors can be realized at a larger scale. This review summarizes results of the studies that have been conducted in the last five years toward the fabrication of cell-based biosensors for different applications with a comprehensive discussion on the challenges, future trends, and potential inputs needed for improving them.

Two novel rhodamine-based fluorescent probes for the rapid and sensitive detection of Fe3+: Experimental and DFT calculations

Fe³⁺ ions play an important role in both biological and environmental field. In this work, two novel rhodamine-based colorimetric and fluorescent probes (RBA2 and RBA3) were designed and synthesized for the efficient detection of Fe³⁺. Upon the addition of Fe³⁺, the fluorescence intensity of RBA2 and RBA3 enhanced 108-fold and 222-fold, respectively. RBA2 and RBA3 exhibited a low detection limit which could achieve 12.8 nM and 11.0 nM. In addition, the binding modes of RBA2 and RBA3 with Fe³⁺ were proved to be 1:1 stoichiometry in the complexes by Job's plot, ESI-MS and ¹H NMR results. The complexing ability of RBA3 with Fe³⁺ excessed to that of RBA2 that was determined by the binding association constants, and highly consistent with DFT calculations results. Furthermore, RBA2 and RBA3 were further utilized to detect Fe³⁺ in living cells and real water samples, indicating their promising prospects in biological and environmental field.

A differentially selective probe for trivalent chemosensor upon single excitation with cell imaging application: potential applications in combinatorial logic circuit and memory devices

A new rhodamine 6G-benzylamine-based sensor (L1) shows selective recognition of trivalent metal ions with advanced level molecular logic gate and bio-imaging applications.

Highly sensitive and selective light-up fluorescent probe for monitoring gallium and chromium ions in vitro and in vivo

Here reported an NBDT sensor could be effectively responsive to gallium and chromium for bio-imaging in vivo.

Multifunctional fluorescent leucomalachite green derivatives for chemodosimetric detection of Fe3+, specific imaging of lipid droplets and intracellular pH monitoring

Fluorescent leucomalachite green derivatives detect micromolar concentrations of Fe³⁺, specifically stain lipid droplets in live cells and monitor intracellular pH variations in microorganisms.

An ultra-sensitive ratiometric fluorescent probe for hypochlorous acid detection by the synergistic effect of AIE and TBET and its application of detecting exogenous/endogenous HOCl in living cells

TR-OClexhibits ultra-high sensitivity towards HOCl with a 7000-fold enhancement in the fluorescence ratio (I₅₈₉/I₄₇₇) and a detection limit of 1.29 nM, which is one of the highest recorded so far.

A dipodal molecular probe for naked eye detection of trivalent cations (Al3+, Fe3+and Cr3+) in aqueous medium and its applications in real sample analysis and molecular logic gates

A simple and low cost multifunctional colorimetric receptor L has been designed, synthesized and characterized by 1H-NMR, IR spectroscopy, ESI-MS spectrometry and elemental analysis. The chemosensor L can selectively detect three biologically and environmentally important trivalent metal ions (Al3+, Fe3+and Cr3+) both visually and spectrophotometrically in CH3CN-H2O (1 : 1, v/v) solution in the presence of other biologically relevant metal ions. The Job's plot analyses indicate the 2 : 2 binding stereochemistry for Al3+, Fe3+ and Cr3+ ions with L, which was further confirmed by 1H-NMR and ESI-MS studies. The binding constant values were found to be 2.9 × 104 M-1 for Al3+, 1.079 × 105 M-1 for Fe3+ and 1.366 × 105 M-1 for Cr3+ respectively. The detections limits of the sensor for Al3+ (2.8 × 10-7 M), Fe3+ (1.9 × 10-7 M) and Cr3+ (2.5 × 10-7 M) are far below than the limit set by the World Health Organization (WHO) for drinking water. Moreover, colorimetric test kits for rapid detection of Al3+, Fe3+, and Cr3+ could be successively applied for all practical purposes, indicating its potential use in environmental samples. It has also been used in building molecular logic gates.