Biphasic photoelectrochemical sensing strategy based on in situ formation of CdS quantum dots for highly sensitive detection of acetylcholinesterase activity and inhibition

Fluorescent metal nanoclusters: From luminescence mechanism to applications in enzyme activity assays

Metal nanoclusters (MNCs) have outstanding fluorescence property and biocompatibility, which show widespread applications in biological analysis. Particularly, evaluation of enzyme activity with the fluorescent MNCs has been developed rapidly within the past several years. In this review, we first introduced the fluorescent mechanism of mono- and bi-metallic nanoclusters, respectively, whose interesting luminescence properties are mainly resulted from electron transfer between the lowest unoccupied molecular orbital (LUMO) and highest occupied molecular orbital (HOMO) energy levels. Meanwhile, the charge migration within the structure occurs through ligand-metal charge transfer (LMCT) or ligand-metal-metal charge transfer (LMMCT). On such foundation, diverse enzyme activities were rigorously evaluated, including three transferases and nine hydrolases, in turn harvesting rapid research progresses within past 5 years. Finally, we summarized the design strategies for evaluating enzyme activity with the MNCs, presented the major issues and challenges remained in the relevant research, coupled by showing some improvement measures. This review will attract researchers dedicated to the studies of the MNCs and provide some constructive insights for their further applications in enzyme analysis.

Ag2S QDs integration with MnO2 nanosheets for the sensitive detection of Cr (VI) via the redox reaction induced photoelectrochemical variation

The heavy metal Cr (VI) will remain, accumulate, and migrate after entering the environment or ecosystem, causing serious harm to the environment. Here, a photoelectrochemical sensor was developed for Cr (VI), utilizing the Ag₂S quantum dots (QDs) and MnO₂ nanosheets as photoactive components. By introducing Ag₂S QDs with a narrow gap, a staggered energy level match is created which effectively prevents the carrier recombination in MnO₂ nanosheets, resulting in an enhanced photocurrent response. In the presence of the electron donor, l-ascorbic acid (AA), the photocurrent of the Ag₂S QDs and MnO₂ nanosheets modified photoelectrode is further enhanced. As AA has the ability to convert Cr (VI) to Cr (Ⅲ), the photocurrent may decline due to the decrease in the electron donors when Cr (VI) is added. This phenomenon can be utilized for the sensitive detection of Cr (VI) over a wider linear range (100 pM-30 μM) with a lower detection limit of 6.46 pM (S/N = 3). This work using the strategy that the targets induced the variations of the electron donor shows the advantages of good sensitivity and nice selectivity. The sensor holds many advantages such as simple fabrication process, economical material expense, and consistent photocurrent signals. It also holds significant potential for environmental monitoring and serves as a practical photoelectric sensing approach for detecting Cr (VI).

A Branched Rutile/Anatase Phase Structure Electrode with Enhanced Electron-Hole Separation for High-Performance Photoelectrochemical DNA Biosensor

A photoelectrochemical (PEC) detection platform was built based on the branched rutile/anatase titanium dioxide (RA-TiO₂) electrode. Theoretical calculations proved that the type-II band alignment of rutile and anatase could facilitate charge separation in the electrode. The self-generated electric field at the interface of two phases can enhance the electron transfer efficiency of the electrode. Carboxylated CdTe quantum dots (QDs) were applied as signal amplification factors. Without the target DNA presence, the CdTe QDs were riveted to the surface of the electrode by the hairpin probe DNA. The sensitization of CdTe QDs increased the photocurrent of the electrode significantly. When the target DNA was present, the structural changes of the hairpin probe DNA resulted in the failure of the sensitized structure. Benefiting from excellent electrode structure design and CdTe QDs sensitization strategy, the PEC assays could achieve highly sensitive and specific detection of target DNA in the range of 1 fM to 1 nM, with a detection limit of 0.23 fM. The electrode construction method proposed in this article can open a new avenue for the preparation of more efficient PEC sensing devices.

Ultrasensitivity Detecting AChE through "Covalent Assembly" and Signal Amplification Strategic Approaches and Applied to Screen Its Inhibitor

An ultrasensitivity detecting assay for acetylcholinesterase (AChE) activity was developed based on "covalent assembly" and signal amplification strategic approaches. After hydrolyzing thioacetylcholine by AChE and participation of thiol in a self-inducing cascade accelerated by the Meldrum acid derivatives of 2-[bis(methylthio) methylene] malonitrile (CA-2), mercaptans triggered an intramolecular cyclization assembly by the probe of 2-(2,2-dicyanovinyl)-5-(diethylamino) phenyl 2,4-dinitrobenzenesulfonate (Sd-I) to produce strong fluorescence. The limit of detection for AChE activity was as low as 0.0048 mU/mL. The detection system also had a good detecting effect on AChE activity in human serum and could also be used to screen its inhibitors. By constructing a Sd-I@agarose hydrogel with a smartphone, a point-of-care detection of AChE activity was achieved again.

Semiconductor quantum dots in photoelectrochemical sensors from fabrication to biosensing applications

Semiconductor quantum dots (QDs) are a promising class of nanomaterials for developing new photoelectrodes and photoelectrochemistry systems for energy storage, transfer, and biosensing applications. These materials have unique electronic and photophysical properties and can be used as optical nanoprobes in displays, biosensors, imaging, optoelectronics, energy storage and energy harvesting. Researchers have recently been exploring the use of QDs in photoelectrochemical (PEC) sensors, which involve exciting a QD-interfaced photoactive material with a flashlight source and generating a photoelectrical current as an output signal. The simple surface properties of QDs also make them suitable for addressing issues related to sensitivity, miniaturization, and cost-effectiveness. This technology has the potential to replace current laboratory practices and equipment, such as spectrophotometers, used for testing sample absorption and emission. Semiconductor QD-based PEC sensors offer simple, fast, and easily miniaturized sensors for analyzing a variety of analytes. This review summarizes the various strategies for interfacing QD nanoarchitectures for PEC sensing, as well as their signal amplification. PEC sensing devices, particularly those used for the detection of disease biomarkers, biomolecules (glucose, dopamine), drugs, and various pathogens, have the potential to revolutionize the biomedical field. This review discusses the advantages of semiconductor QD-based PEC biosensors and their fabrication methods, with a focus on disease diagnostics and the detection of various biomolecules. Finally, the review provides prospects and considerations for QD-based photoelectrochemical sensor systems in terms of their sensitivity, speed, and portability for biomedical applications.

In Situ Formation of o-Phenylenediamine Cascade Polymers Mediated by Metal-Organic Framework Nanozymes for Fluorescent and Photothermal Dual-Mode Assay of Acetylcholinesterase Activity

A fluorescent and photothermal dual-mode assay method was established for the detection of acetylcholinesterase (AChE) activity based on in situ formation of o-phenylenediamine (oPD) cascade polymers. First, copper metal-organic frameworks of benzenetricarboxylic acid (Cu-BTC) were screened out as nanozymes with excellent oxidase-like activity and confinement catalysis effect. Then, an ingenious oPD cascade polymerization strategy was proposed. That is, oPD was oxidized by Cu-BTC to oPD oligomers with strong yellow fluorescence, and oPD oligomers were further catalyzed to generate J-aggregation, which promotes the formation of oPD polymer nanoparticles with a high photothermal effect. By utilizing thiocholine (enzymolysis product of acetylthiocholine) to inhibit the Cu-BTC catalytic effect, AChE activity was detected through the fluorescence-photothermal dual-signal change of oPD oligomers and polymer nanoparticles. Both assay modes have low detection limitation (0.03 U L^-1 for fluorescence and 0.05 U L^-1 for photothermal) and can accurately detect the AChE activity of human serum (recovery 85.0-111.3%). The detection results of real serum samples by fluorescent and photothermal dual modes are consistent with each other (relative error ≤ 5.2%). It is worth emphasizing that this is the first time to report the high photothermal effect of oPD polymers and the fluorescence-photothermal dual-mode assay of enzyme activity.

Imidazo[1,2-a]pyridine based small organic fluorescent molecules for selective detection of nerve agents simulants

A fused heterocyclic ESIPT imidazo[1,2-a]pyridine-based probes for colorimetric and fluorometric detection of nerve agents simulant sarin (DCP) and tabun (DCNP) are reported. The probes (5b, 6a & 6b) were found to be highly sensitive and selective for the detection of DCNP and DCP at a micromolar concentration within seconds with no observed interference from other various types of analytes. The LOD for 6b towards DCP was found to be 0.6 µM with a linear range from 0 to 8 µM. The low-cost portable cellulose paper strip fabricated with probe 6b for real-time detection of DCP in the gas phase and spiked water has been developed. The paper strip product was found effective in detecting the presence of DCP in water and vapor state with substantial color changes which could be easily observed by the naked eye and under a handheld UV lamp at a wavelength of 365 nm.

Substrate-free fluorescence ratiometric detection of serum acetylcholinesterase activity with a self-assembled CsPbBr3 perovskite nanocrystals/tetraphenylporphyrin tetrasulfonic acid nanocomposite

A dual-emission fluorescent nanoprobe was successfully constructed through self-assembling CsPbBr₃ perovskite nanocrystals (CsPbBr₃ PNCs) and tetraphenylporphyrin tetrasulfonic acid (TPPS). Acetylcholinesterase (AChE) is observed to directly quench the green fluorescence of CsPbBr₃ PNCs at 520 nm in the absence of an enzyme substrate, but has no significant influence on the red emission of TPPS at 650 nm. The decreased value of the fluorescence intensities ratio at 520 to 650 nm (ΔF₅₂₀/F₆₅₀) is proportional to the logarithmic value of AChE activity ranging from 0.05 to 1.0 U/L. The limit of detection is as low as 0.0042 U/L. The relative standard deviation is 3.6% in eleven consecutive measurements of 0.2 U/L AChE. The method exhibits a good anti-interference capacity since it does not respond to most concomitant species. Satisfactory results are acquired for the determination of AChE activity in human serum samples.

Engineering exposed vertical nano-TiO2 (001) facets/BiOI nanosheet heterojunction film for constructing a satisfactory PEC glucose oxidase biosensor

In the field of photoelectrochemical (PEC) enzyme biosensors, constructing efficient photoelectrodes, in which the recombination of photogenerated carriers is an important factor affecting the performance, is of great significance. Herein, to enhance the separation efficiency of photogenerated carriers, titanium dioxide (TiO₂) nanosheet (NS)/bismuth oxyiodide (BiOI) NS/glucose oxidase (GOx) composites were prepared via hydrothermal and solvothermal methods. Single-crystal anatase TiO₂ NSs with a high percentage of (001) facets lead to better photocarrier separation due to heterojunctions between facets. After coupling with BiOI NSs, the photoelectrochemical performance of the electrode was greatly improved. The photogenerated electrons from TiO₂ and BiOI gathered at TiO₂ (101) and were exported through the fluorine-doped tin oxide (FTO) substrate to generate electrical signals. Photogenerated holes were transferred to TiO₂ (001) and BiOI to participate in the enzymatic reaction, showing the outstanding separation of electrons and holes. The prepared TiO₂ NS/BiOI NS/GOx glucose biosensor achieved satisfactory results, with sensitivity of 14.25 μA mM⁻¹ cm⁻², a linear measurement range of 0–1 mM, and a limit of detection (3S/N) of 0.01 mM in phosphate buffered saline (PBS) at a pH of 7.4. The mechanism for the efficient separation of photogenerated carriers based on the facet heterojunctions introduced in this paper also provides new insights into other optoelectronic biosensors.

Demonstration of the mechanism based on the synergistic effect of TiO₂ facet heterojunctions and TiO₂/BiOI heterojunctions to promote efficient separation of photogenerated carriers.

Polyoxometalate-based materials in extraction, and electrochemical and optical detection methods: A review

Polyoxometalates (POMs) as metal-oxide anions have exceptional properties like high negative charges, remarkable redox abilities, unique ligand properties and availability of organic grafting. Moreover, the amenability of POMs to modification with different materials makes them suitable as precursors to further obtain new composites. Due to their unique attributes, POMs and their composites have been utilized as adsorbents, electrodes and catalysts in extraction, and electrochemical and optical detection methods, respectively. A survey of the recent progress and developments of POM-based materials in these methods is therefore desirable, and should be of great interest. In this review article, POM-based materials, their properties as well as their identification methods, and analytical applications as adsorbents, electrodes and catalysts, and corresponding mechanisms of action, where relevant, are reviewed. Some current issues of the utilization of these materials and their future prospects in analytical chemistry are discussed.

In Situ Formation of Bi2MoO6-Bi2S3 Heterostructure: A Proof-Of-Concept Study for Photoelectrochemical Bioassay of l-Cysteine

A novel signal-increased photoelectrochemical (PEC) biosensor for l-cysteine (L-Cys) was proposed based on the Bi₂MoO₆–Bi₂S₃ heterostructure formed in situ on the indium–tin oxide (ITO) electrode. To fabricate the PEC biosensor, Bi₂MoO₆ nanoparticles were prepared by a hydrothermal method and coated on a bare ITO electrode. When L-Cys existed, Bi₂S₃ was formed in situ on the interface of the Bi₂MoO₆/ITO electrode by a chemical displacement reaction. Under the visible light irradiation, the Bi₂MoO₆–Bi₂S₃/ITO electrode exhibited evident enhancement in photocurrent response compared with the Bi₂MoO₆/ITO electrode, owing to the signal-increased sensing system and the excellent property of the formed Bi₂MoO₆–Bi₂S₃ heterostructure such as the widened light absorption range and efficient separation of photo-induced electron–hole pairs. Under the optimal conditions, the sensor for L-Cys detection has a linear range from 5.0 × 10⁻¹¹ to 1.0 × 10⁻⁴ mol L⁻¹ and a detection limit of 5.0 × 10⁻¹² mol L⁻¹. The recoveries ranging from 90.0% to 110.0% for determining L-Cys in human serum samples validated the applicability of the biosensor. This strategy not only provides a method for L-Cys detection but also broadens the application of the PEC bioanalysis based on in situ formation of photoactive materials.

Photoelectrochemical Performance of Nanotubular Fe2O3–TiO2 Electrodes under Solar Radiation

Fe₂O₃–TiO₂ materials were obtained by the cathodic electrochemical deposition of Fe on anodic TiO₂ at different deposition times (5–180 s), followed by annealing at 450 °C. The effect of the hematite content on the photoelectrochemical (PEC) activity of the received materials was studied. The synthesized electrodes were characterized by field emission scanning electron microscopy (FE-SEM), energy dispersive spectroscopy (EDS), X-ray diffraction (XRD), Raman spectroscopy, diffuse reflectance spectroscopy (DRS), Mott–Schottky analysis, and PEC measurements. It was shown that the amount of deposited iron (ca. 0.5 at.%–30 at.%) and, consequently, hematite after a final annealing increased with the extension of deposition time and directly affected the semiconducting properties of the hybrid material. It was observed that the flat band potential shifted towards more positive values, facilitating photoelectrochemical water oxidation. In addition, the optical band gap decreased from 3.18 eV to 2.77 eV, which resulted in enhanced PEC visible-light response. Moreover, the Fe₂O₃–TiO₂ electrodes were sensitive to the addition of glucose, which indicates that such materials may be considered as potential PEC sensors for the detection of glucose.

Near-Infrared Fluorescence Probe for Specific Detection of Acetylcholinesterase and Imaging in Live Cells and Zebrafish

Acetylcholinesterase (AChE) is a pivotal enzyme that is closely related with multiple neurological diseases, such as brain disorders or alterations in the neurotransmission and cancer. The development of convenient methods for imaging AChE activity in biological samples is very important to understand its mechanisms and functions in a living system. Herein, a fluorescent probe exhibiting emission in the near-infrared (NIR) region is developed to detect AChE and visualize biological AChE activities. This probe exhibits a quick response time, reasonable detection limit, and a large Stokes shift accompanied by the NIR emission. The probe has much better reactivity toward AChE than butyrylcholinesterase, which is one of the significant interfering substances. The outstanding specificity of the probe is proved by cellular imaging AChE activity and successful mapping in different regions of zebrafish. Such an effective probe can greatly contribute to ongoing efforts to design emission probes that have distinct properties to assay AChE in biological systems.

Gold and Platinum Nanoparticle-Functionalized TiO2 Nanotubes for Photoelectrochemical Glucose Sensing

Developing stable photoelectrochemistry (PEC) glucose biosensors with high sensitivity and a low detection limit is highly desirable in the biosensor field. Herein, a highly sensitive and stable enzymatic glucose PEC biosensor is rationally designed and fabricated using a TiO₂NTs/Au/Pt/GOx electrode. First, we prepared one-dimensional TiO₂ nanotube arrays which could realize the orthogonalization of the light-incident direction and the carrier diffusion direction via anodization. Subsequently, we used the method of photoassisted deposition for anchoring Pt nanoparticles on TiO₂NTs after electrodepositing Au nanoparticles. Among them, Au nanoparticles promote light absorption via the surface plasmon resonance effect and the separation of photogenerated carriers through forming a Schottky junction. Moreover, the Pt nanoparticles on the electrode surface can react with hydrogen peroxide (H₂O₂) generated from glucose (Glu) oxidation by glucose oxidase (GOx), accelerating the electron-transfer process during glucose oxidation and greatly improving the sensitivity of the glucose biosensor. As a result, TiO₂NTs/Au/Pt/GOx exhibited excellent PEC performance, achieving a high sensitivity of 81.93 μA mM^-1 cm^-2 and a low detection limit (1.39 μM), far exceeding the performance of TiO₂NTs/M/GOx (M = Au, Pt). Therefore, the introduction of Pt nanoparticles as active substances to promote enzymatic reactions is important for designing high-performance enzyme biosensors.

Photoelectrochemical Enzyme Biosensor Based on TiO2 Nanorod/TiO2 Quantum Dot/Polydopamine/Glucose Oxidase Composites with Strong Visible-Light Response

Although photoelectrochemical (PEC) enzyme biosensors based on visible-light detection would have a high practical value, their development has been limited by the weak visible-light response of available photoactive substrates. Here, to enhance the visible-light response of a photoelectric substrate, a TiO₂ nanorods (NRs)/TiO₂ quantum dots (QDs)/polydopamine (PDA)/glucose oxidase nanocomposite was prepared via hydrothermal synthesis, followed by photopolymerization. TiO₂ QDs with strong light absorption and excellent photocatalytic activity were introduced between the TiO₂ NRs and the PDA. An efficient electron transport interface that formed as a result of the combination of the TiO₂ NRs, TiO₂ QDs, and the PDA could not only transfer electrons quickly and orderly, but also substantially improve the response of the TiO₂ NRs under visible light. Through a series glucose detection, a sensor based on the nanocomposite was found to exhibit superior sensing performance under visible light with a sensitivity of 4.63 μA mM^-1 cm^-2, a linear response over the concentration 0.1-4 mM, and a detection limit of 8.16 μM. This work proposes a biosensor that can detect under visible light, thereby expanding the application range of PEC enzyme biosensors.

Rationally constructed ZnCdS-HDCs@In2S3-HNRs double-hollow heterojunction with promoted light capture capability for photoelectrochemical biosensing

The construction of novel heterojunction is regarded as an operative scheme to promote the transport of photogenerated carriers and reduce electron-hole pair recombination to enhance the photoelectrochemical (PEC) performances. Herein, ZnCdS hollow dodecahedral nanocages (ZnCdS-HDCs) and In₂S₃ hollow nanorods (In₂S₃-HNRs), which were derived from two different of metal-organic frameworks (MOFs) by solvothermal sulfidation method and were constructed an original double-hollow heterostructure ZnCdS-HDCs@In₂S₃-HNRs. The intrinsic mechanism of In₂S₃-HNRs benefiting from unique morphology to boost the photochemical properties under visible light irradiation was illustrated. Meanwhile, the mechanism of the novel type II heterojunction with staggered matching levels was revealed, which could effectively restrict electron-hole pair reassociation separation, and accelerated charge separation and transfer. Therefore, based on the excellent PEC performance of ZnCdS- HDCs@In₂S₃-HNRs double-hollow heterostructure, a signal-off PEC biosensor platform without labeled was constructed for the detection of CA15-3, which manifested acceptable specificity, reproducibility and stability. Additionally, the expected PEC biosensors showed a linear response range from 1.0 × 10^-5 to 10 U·mL^-1 in addition to an ultralow detection limit of 3.78 × 10^-6 U·mL^-1. This study innovatively constructed and prepared a new double-hollow heterojunction material with superior PEC nature for the application of PEC biosensing, which exhibits a broad application prospect.

In-situ preparation of CuO nanoparticles decorated In2O3 pn heterojunction composite for the photoelectrochemical detection of ornidazole

The eco-friendly synthesis of metal oxides pn junction composite with high visible light absorption and its photoelectrochemical monitoring on antibiotics is reported. The In2O3-CuO pn heterojunction composite was successfully prepared by in-situ hydrothermal decoration of CuO on the prepared In2O3 using a simple reflux method. The obtained nanorods like In2O3-CuO pn heterojunction exhibited high conductivity with excellent stability for the facilitated photoelectrochemical detection of ornidazole (ONZ) that plays a role in aquatic toxicology. The photo-stability and optical characteristics of the In2O3-CuO heterojunction composite were analyzed through photocurrent and UV-visible studies. Mechanism of ONZ signaling has been proposed with appropriate band levels derived by Mott-Schottky analysis. An optimized In2O3-CuO heterojunction detects ONZ in the range 0.05-65.3 nM with 0.0092 nM as the limit of detection at - 0.45 V (vs. Ag/AgCl) working potential. The practical applicability of the sensor device was tested in chicken meat, human urine, and lake water samples containing ONZ. The recoveries of real samples were above 95% and results obtained were compared with electrochemical methods.

An enhanced photoelectrochemical biosensor for colitoxin DNA based on HKUST-1/TiO2 and derived HKUST-CuO/TiO2 heterogeneous composites

HKUST-1 MOFs and its derivative HKUST-CuO were coupled with TiO₂ nanoparticles to form the heterogeneous composites of HKUST-1/TiO₂ and HKUST-CuO/TiO₂ based on their well-suitable bandgap energies (Eg). Compared with mono-component HKUST-1 or HKUST-CuO, the prepared composites displayed photoelectrochemical (PEC) response due to the synergistic effect from their heterogeneous structure. Higher photocurrent response was obtained on HKUST-CuO/TiO₂-modified ITO electrode (HKUST-CuO/TiO₂/ITO), which could be attributed to the hollow structure with a thin shell of HKUST-CuO greatly enhancing visible spectra harvesting. The CuO component in HKUST-CuO not only could accelerate electron transfer on the heterojunction interface but also effectively separate the photo-generated charge carriers (e^-1/h⁺). Based on the excellent PEC performance of prepared photoactive composite material, under visible-light excitation (λ ≥ 420 nm) and with a working potential of 0 V (vs. Ag/AgCl), the S1 (probe DNA)/HKUST-CuO/TiO₂/ITO PEC platform was successfully fabricated for colitoxin DNA detection without using ascorbic acid (AA) as an electron donor. Compared with the analysis results on S1/HKUST-1/TiO₂/ITO electrode, S1/HKUST-CuO/TiO₂/ITO displayed a wider linear response range from 1.0 × 10^-6 to 4.0 × 10^-1 nM with a lower detection limit of 3.73 × 10^-7 nM (S/N = 3), the linear regression equation was ΔI (10^-6 A) =0.5549-0.1858 log (C_S2/M), which confirmed the HKUST-CuO could improve sensitivity because of its prominent PEC property. The relative standard deviation (RSD) of the PEC sensor for target DNA detection of 2.0 × 10^-4 nM was 7.4%. The proposed DNA biosensor also possessed good specificity and stability. Hence, this reported work was a promising strategy for molecular diagnosis in the bio-analysis field. (A) Schematic illustration of the preparation process of the proposed PEC biosensors for colitoxin DNA detection. (B) The preparation process of HKUST-1 and HKUST-CuO.

Crystal Violet-Sensitized Direct Z-Scheme Heterojunction Coupled with a G-Wire Superstructure for Photoelectrochemical Sensing of Uracil-DNA Glycosylase

Dye sensitization achieving photoelectrochemical (PEC) signal amplification for ultrasensitive bioanalysis has undergone a major breakthrough. In this proposal, an innovative PEC sensing platform is developed by combining Z-scheme WO₃@SnS₂ photoactive materials and a G-wire superstructure as well as a dye sensitization enhancement strategy. The newly synthesized WO₃@SnS₂ heterojunction with outstanding PEC performance is employed as a photoelectrode matrix. Due to the formation of the Z-scheme heterojunction between WO₃ and SnS₂, the migration dynamics of the photogenerated carrier is evidently augmented. To improve sensitivity, the target excision-driven dual-cycle signal amplification strategy is introduced to output exponential c-myc fragments. Crystal violet is then conjugated into the G-quadruplex to amplify the PEC signal, where crystal violet generates excited electrons by capturing visible light and rapidly injects electrons into the conduction band of SnS₂, suppressing the recombination of the photo-induced carrier. Moreover, the G-wire superstructure acts as a universal amplification pathway, ensuring adequate crystal violet loads. Specifically, the biosensor for uracil-DNA glycosylase quantification displays a wide detection range (0.0005-1.0 U/mL) and a lower detection limit (0.00025 U/mL). Furthermore, the Z-scheme electron migration mechanism and the crystal violet sensitization effect are discussed in detail. The construction of the PEC sensor provides a new consideration for signal amplification and material design.

Enhancing the performance of photoelectrochemical glucose sensor via the electron cloud bridge of Au in SrTiO3/PDA electrodes

Developing photoelectrochemical biosensors via efficient photogenerated-charge separation remains a challenging task in biomolecular detection. In this study, we utilised a simple approach for constructing an efficient photoactive organic-inorganic heterojunction interface composed of SrTiO3 with high photocatalytic activity and polydopamine (PDA) with high biocompatibility and electrical conductivity. Gold nanoparticles with dense electron cloud properties were introduced as a bridge between SrTiO3 and PDA (SrTiO3/Au/PDA). The Au bridge allowed the PDA to uniformly and tightly attach on the surface of SrTiO3 electrodes and also provided a separate transmission channel for electrons from PDA to SrTiO3. The rapidly transmitted electrons were captured by a signal-acquisition system, thereby improving the photocurrent signal output. The 3D hollowed out SrTiO3/Au/PDA biosensor manufactured herein was used for glucose detection. The biosensor achieved ultrahigh sensitivities reaching 23.7 μA mM-1 cm-2, an extended linear range (1-20 mM), and a low detection limit (0.012 mM). The excellent results of glucose analysis in serum samples further confirmed the feasibility of the biosensor in clinical applications. In summary, the proposed strategy allowed for the use of an electronic cloud bridge in the construction of glucose biosensors with satisfactory performances, which is promising for the future fabrication of high-performance biosensors.

Two-dimensional WS2/MoS2 heterostructures: properties and applications

The successful fabrication of WS₂/MoS₂ heterostructures provides more possibilities for optoelectronic and thermoelectric applications than graphene because of their direct bandgap characteristics; therefore, scientific investigations on WS₂/MoS₂ heterostructures are more significant and thriving. In this paper, we review the latest research progress in WS₂/MoS₂ heterostructures, and look forward to their properties and applications. Firstly, we analyze the crystal structure and electronic structure of WS₂, MoS₂, and their heterostructures. Secondly, we comprehensively present the widely used methods for preparing heterostructures. Finally, based on the unique physical characteristics of WS₂/MoS₂ heterostructures, we focus on their properties and applications in mechanics, electronics, optoelectronics, and thermoelectronics.

Chemical-chemical redox cycling amplification strategy in a self-powered photoelectrochemical system: a proof of concept for signal amplified photocathodic immunoassay

A chemical-chemical redox cycling amplification strategy was introduced into a photocathodic immunosensing system. To prove the applicability of the method, a novel self-powered photochemical system by integrating the photoanode and photocathode was designed for protein analysis.

Light-accelerating oxidase-mimicking activity of black phosphorus quantum dots for colorimetric detection of acetylcholinesterase activity and inhibitor screening

A feasible and sensitive colorimetric platform was established for the assay of acetylcholinesterase (AChE) activity and evaluation of its inhibitor screening, based upon the light-accelerating oxidase-mimicking activity of black phosphorus quantum dots (BP QDs). The BP QDs were synthesized through a thermal exfoliation method and characterized using various techniques. The BP QDs exhibit oxidase-mimicking catalytic activity on dissolved oxygen-mediating oxidation of 3,3',5,5'-tetramethylbenzidine, a typical substrate of oxidase. This results in a transformation of 3,3',5,5'-tetramethylbenzidine into its blue oxidized product, which has a visible absorption peak at 652 nm. The exposure of 365 nm light irradiation significantly accelerates the oxidase-mimicking activity of the BP QDs and speeds up the reaction efficiency. AChE can specifically catalyze the decomposition of its substrate acetylthiocholine chloride to thiocholine. Thiocholine has reducing capacity and can thus reduce the oxidase-mimicking activity of the BP QDs. As a result, the oxidation of 3,3',5,5'-tetramethylbenzidine is hindered and the blue solution becomes paler. This gives a linear response for AChE ranging from 0.5 to 10.0 mU mL-1 and a detection limit of 0.17 mU mL-1. The assay was successfully applied to evaluate inhibitor screening with neostigmine as the model.

A one-step hydrothermal route to fabricate a ZnO nanorod/3D graphene aerogel-sensitized structure with enhanced photoelectrochemistry performance and self-powered photoelectrochemical biosensing of parathion-methyl

A facile one-pot hydrothermal method for fabricating ZnO/GAs was developed. And a novel self-powered PEC biosensor was constructed based on the ZnO/GAs with the amplification of thiocholine for the detection of parathion-methyl.

Polymeric Membrane Electrodes Using Calix[4]pyrrole Bis/Tetra-Phosphonate Cavitands as Ionophores for Potentiometric Acetylcholine Sensing with High Selectivity

A handful of bis/tetra-phosphonate calix[4]pyrroles with recognition sites embedding in hydrophobic cavitands were evaluated for the first time as ionophores for polymeric membrane Ach⁺-selective electrodes. Highly selective potentiometric Ach⁺ could be achieved over its analogues, especially for Ch⁺, which differs only by an acetate tail from Ach⁺. The superior performance of the proposed ISEs might be ascribed to a dual-site binding mode, in which the trimethylammonium head and acetate tail were accommodated by the phosphonate group-bridged aryl walls and the bowl-shaped aromatic cavity, through cation-π/charge-dipole interaction and the convergent four N-H···O hydrogen bonds, respectively. To gain more insight into the performance of the proposed ISEs, the cation-ionophore complex constants in the membrane phase were determined, and the binding affinity trend correlates well with the selectivity pattern. These results suggest that conformational preorganization of the ionophores and complementary weak interactions do change the selectivity of the ionophores. Studies on the influence of the sample solution pH demonstrated that the developed ISEs can be employed in a wide pH range of 4.0-9.6 with a fast response (<60 s), good reversibility, and long lifetime. Optimizing the membrane components, such as ionophores, lipophilic additives, and plasticizers, yielded ISEs, showing Nernstian responses to Ach⁺ with improved linear ranges and detection limits (a slope of -59.5 mV/dec in the linear range of 1 × 10^-6-1 × 10^-2 M with a detection limit of 3 × 10^-7 M), which led to the success of the determination of Ach⁺ in spiked urine and milk samples.

A universal assay strategy for sensitive and simultaneous quantitation of multiplex tumor markers based on the stirring rod-immobilized DNA-LaMnO3 perovskite-metal ions encoded probes

It was extremely urgent to develop some simultaneous and sensitive biosensors for detecting multiplex serum tumor markers (TMs) for early screening of cancers. Herein, a multiplex assay was developed based on the DNA-LaMnO₃ (DNA-LMO) perovskite encoded probes and targets mediated competitive replacement strategy. Alpha fetoprotein (AFP), carcinoembryonic antigen (CEA) and prostate specific antigen (PSA) markers were employed as representative target TMs. Aptasensor is prepared by a series of DNA-LMO-M encode probes which were prepared by three hyperbranched DNA firstly immobilized on LMO encapsulating Pb, Cd or Cu ions. Then, three TMs aptamers were labeled on the stirring-rod and hybridized with the probes. After the developed encoded probes was incubated the TMs, the encoded probes corresponding to different TMs can be released into the supernatant through the competitive replacement. The inner metal ion can be simultaneously detected by square wave voltammetry corresponding to various TMs. Since the stirring rod can enrich many encoded probes containing a lot of metal ions, multiplex signal amplification can be realized. Due to the enrichment and easy separation of the stirring rod, the signal-to-noise ratio was also obviously improved and thus to results in good sensitivity and accuracy. Moreover, it took only 20 min to detect three targets which much faster than many same types of aptasensor. Under the optimal conditions, the low detection limit for CEA (3.6 × 10^-4 ng/mL), AFP (3.4 × 10^-4 ng/mL) and PSA (2.8 × 10^-4 ng/mL) were obtained. Therefore, this method is likely to be used for early and sensitive screening of tumors.

Fluorescent detection of Cu (II) ions based on DNAzymatic cascaded cyclic amplification

A fluorescent biosensor based on the cascaded cyclic amplification-lighted copper nanoparticles has been developed, optimized, and validated. In the double-modular cascaded cyclic amplification, a DNAzymatic cyclic amplification unit transforms metal ion signal to specific DNA sequences, and a linear/exponential integrated amplification unit converts as-prepared DNA codes to identical thymine (T)-rich DNA templates. T-rich scaffolds can induce the generation of red fluorescent copper nanoparticles, with fluorescence emission at 625 nm upon the excitation at 340 nm, as signal vehicles for quantitative detection of metal ions. Copper ions, selected as the model target, could be detected in a wide linear range from 10 to 10⁴ nM depending on the increased fluorescent intensity, and the detection limit is 5.6 ± 0.52 nM (n = 3) within 40 min, which is 4 orders of magnitude lower than the limits set in drinking water. In the detection of Cu²⁺ in real tap and lake water, the results between inductively coupled plasma mass spectrometry (ICP-MS) and our proposed biosensor were consistent, illustrating the practicability of the fabricated method. In summary, the established fluorescent biosensor compensates the deficiency of immunoassays failing to analyze metal ions, broadens ranges of biomarkers responding to cleaved DNAzymes, provides an open platform sensing different metal ions, and meets the increasing need for the ultrasensitive detection in the field of food safety, environmental monitoring, and medical diagnosis.

Photoelectrochemical Biosensor for DNA Formylation Detection in Genomic DNA of Maize Seedlings Based on Black Tio2-Enhanced Photoactivity of MoS2/WS2 Heterojunction

5-Formylcytosine (5fC) is a rare base found in mammalian DNA, which is thought to be involved in the demethylation of DNA. As a stable epigenetic modification, 5fC participates in gene regulation and cell differentiation, and plays an important role in the growth and development of plants. However, the abundance of 5fC is only as low as 0.002-0.02% of cytosine. Therefore, to further understand the functions of 5fC, a rapid, highly sensitive, and efficient method is needed for detecting 5fC. Herein, a novel photoelectrochemical (PEC) biosensor was constructed for 5fC detection, where a MoS₂/WS₂ nanosheet heterojunction was employed as a photoactive material, amino-functionalized Fe₃O₄ and SMCC were used as a linker, 4-amino-3-hydrazino-5-mercapto-1,2,4-triazole was adopted as 5fC recognition reagent, and black TiO₂ (B-TiO₂) was used as a signal amplification unit. Under the optimal experimental conditions, this PEC biosensor showed a wide linear range of 0.01-200 nM and a low detection limit of 2.7 pM (S/N = 3). Due to the specific covalent reaction between -NH₂ and -CHO, the biosensor presented high detection sensitivity, even discriminating 5fC with 5-methylcytosine and 5-hydroxymethylcytosine. The biosensor was then applied to investigate the effect of heavy metal Cd²⁺ on 5fC content in the root, stem, and leaves of maize seedlings.

Photoelectrochemical assay for DNA hydroxymethylation determination based on the inhibited photoactivity of black TiO2 nanosphere by ZnO

A photoelectrochemical method was proposed for DNA hydroxymethylation determination using black TiO₂ (B-TiO₂) nanosphere as photoactive material and ZnO as photoactivity inhibitor. After hydroxymethylated DNA (5hmC-DNA) was captured on the probe modified B-TiO₂/ITO electrode surface through hybridization, a glycosyl can be then transferred from uridine diphosphoglucose to 5hmC-DNA and formed a covalent structure with -CH₂OH in the presence of T4 β-glucosyltransferase (β-GT). Afterwards, based on a series of covalent reaction, amino functionalized ZnO nanoparticles are further immobilized to the surface of the electrode. Due to the capacity to expend the irradiation light and the photogenerated electron of electron donor, the modified ZnO nanoparticles can result in a decreased photocurrent. The developed method shows wide linear ranges from 0.05-200 nM for hydroxymethylated DNA and 1-220 unit·mL^-1 for T4-β-glucosyltransferase. The corresponding determination limits were 0.013 nM and 0.24 unit·mL^-1, respectively. The enzyme activity inhibited by 4-phenylimidazole was evaluated. This photoelectrochemical method shows high specificity for 5hmC-DNA (compared to 5fC, 5mC, m6A, control) and β-GT (compared to β-AGT, UGT2B7), and shows excellent stability for testing 5hmC (RSD = 2.75%). Graphical abstractSchematic representation of photoelectrochemical method for DNA hydroxymethylation and β-glucosyltransferase detection based on the glycosylation reaction of -CH₂OH in 5-hydroxymethylcytosine and the inhibition activity of ZnO to the photoactivity of black TiO₂ nanospheres.

Pore Confinement-Enhanced Electrochemiluminescence on SnO2 Nanocrystal Xerogel with NO3- As Co-Reactant and Its Application in Facile and Sensitive Bioanalysis

Herein, 10-fold electrochemiluminescence (ECL) enhancement from a porous SnO₂ nanocrystal (SnO₂ NC) xerogel (vs discrete SnO₂ NCs) was first observed with NO₃^- as a novel coreactant. This new booster phenomenon caused by pore characteristic was defined as "pore confinement-induced ECL enhancement", which originated from two possible reasons: First, the SnO₂ NC xerogel with hierarchically porous structure could not only localize massive luminophore near the electrode surface, more importantly, but could accelerate the electrochemical and chemiluminescence reaction efficiency because the pore channels of xerogel could promote the mass transport and electron transfer in the confined spaces. Second, the NO₃^- could be in situ reduced easily to the active nitrogen species by means of the pore confinement effect, which could be served as a new coreactant for nanocrystal-based ECL amplification with the excellent stability and good biocompatibility. As a proof of concept, a facile and sensitive sensing platform for SO₃^2- detection has been successfully constructed upon effectively quenching of SO₃^2- toward the SnO₂ NC xerogel/NO₃^- ECL system. The key feature about this work presented a grand avenue to achieve the strong ECL signal, especially from weak emitters, which gave a fresh impetus to the construction of new-generation of surface-confined ECL platform with potential applications in ECL imaging and sensing.

Homogeneous photoelectrochemical biosensing via synergy of G-quadruplex/hemin catalysed reactions and the inner filter effect

We develop a label-free homogeneous photoelectrochemical biosensing strategy for microRNA quantification based on the synergy of G-quadruplex/hemin catalyzed electron donor consumption and the inner filter effect.

Acetylcholinesterase-catalyzed silver deposition for ultrasensitive electrochemical biosensing of organophosphorus pesticides

This work reports, for the first time, acetylcholinesterase-catalyzed silver deposition for sensitive electrochemical detection of organophosphorus pesticides.

Copper(II) complex as a turn on fluorescent sensing platform for acetylcholinesterase activity with high sensitivity

Acetylcholinesterase (AChE) is an important enzyme associated with many nervous diseases, demonstrating the great need for smarter sensing platform with improved sensitivity, selectivity and simplified operation. A "turn on" fluorometric assay is described herein for AChE activity detection, according to the specific enzyme catalyzed reaction of acetylcholine (ATCh) by AChE, which generates thiocholine (TCh) as the product. The well-designed fluorescent probe HBTP possesses ESIPT (Excited State Intramolecular Proton Transfer) nature, leading to a larger Stokes shift, which could be quenched upon coordination with Cu²⁺. The fluorescence-silent HBTP-Cu²⁺ complex could be broken by TCh generated from reaction of ATCh with AChE, giving rise to HBTP release which originates from competitive coordination of TCh with Cu²⁺. This complex probe HBTP-Cu²⁺ offers a limit detection as low as 0.02 mU mL^-1, which is lower than most reported literatures. Furthermore, both HBTP-Cu²⁺ and HBTP show little toxicity to live cells and is available in visualizing cellular AChE activity.

Single-particle enumeration-based ultrasensitive enzyme activity quantification with fluorescent polymer nanoparticles

Acetylcholinesterase (AChE) plays a vital role in nerve conduction through rapidly hydrolyzing the neurotransmitter acetylcholine (ACh) and is correlated with Alzheimer's disease. In this work, a label-free single-particle enumeration (SPE) method for the quantitative detection of acetylcholinesterase (AChE) activity is developed. The design is based on the fluorescence resonance energy transfer (FRET) between fluorescent conjugated polymer nanoparticles (FCPNPs) and MnO2 nanosheets. The fluorescence of FCPNPs can be effectively quenched by MnO2 nanosheets via hydrogen bonding interaction. In the presence of acetylcholinesterase (AChE), acetylthiocholine (ATCh) could be hydrolyzed to thiocholine (TCh), which can reduce MnO2 to Mn2+ and trigger the decomposition of MnO2 nanosheets. As a result, the fluorescence of FCPNPs is restored. Taking advantage of the superior brightness and stable fluorescence emission from individual FCPNPs, the accurate quantification of AChE is achieved by statistically counting the fluorescent particles on the glass slide surface. A linear range from 5 to 1600 μU mL-1 is obtained for AChE assay and the limit-of-detection (LOD) is 1.02 μU mL-1, which is far below the spectroscopic measurements in bulk solution. In the human serum sample, satisfactory recovery efficiencies are determined in a range of 91.0%-103.0%. Furthermore, pesticide carbaryl as an inhibitor of AChE activity was detected. The LOD is 1.12 pg mL-1 with linear responses ranging from 5 to 300 pg mL-1, which demonstrates the feasibility of this approach for AChE inhibitor screening. As a consequence, the label-free SPE-based method affords a promising platform for the sensitive detection of target molecules in the future.

A label-free photoelectrochemical aptasensor for facile and ultrasensitive mercury ion assay based on a solution-phase photoactive probe and exonuclease III-assisted amplification

In typical photoelectrochemical (PEC) biosensing assays, electrodes are generally modified with photoactive probes and/or target recognition probes, which makes the processes complicated, time-consuming, and difficult to achieve excellent reproducibility. Hence, to overcome such shortcomings, we propose here an immobilization-free and label-free PEC aptasensor using solution-phase methylene blue (MB) as the PEC signal probe. Based on the unique T-Hg²⁺-T base pairs, and the diffusivity difference between free MB molecules and the MB/G-quadruplex composite towards the ITO electrode surface with negative charge, the "signal-off" approach for Hg²⁺ detection is developed. In the presence of target Hg²⁺, via the T-Hg²⁺-T bond formation, the two sticky ends of the hairpin DNA probe form a rigid duplex stem, which triggers the exonuclease III-facilitated target cycling amplification, and the formation of multiple G-quadruplexes. Upon the intercalation of MB in G-quadruplexes, significantly decreased photocurrent is obtained owing to the increased electrostatic repulsion between the MB/G-quadruplex composite and the ITO electrode. Therefore, highly sensitive and ultrasensitive Hg²⁺ determination is achieved, with a low detection limit of 1.2 pM, well below the maximum allowable Hg²⁺ level in drinking water defined by the WHO, China's Ministry of Health, and the US EPA. Due to the avoidance of sophisticated electrode modification and recognition probe immobilization processes, as well as an expensive labeling procedure, the PEC aptasensor proposed here demonstrates the advantages of simplicity, good reproducibility, rapidness and low cost.