Design of nuclease-based target recycling signal amplification in aptasensors

Trends and frontiers in signal amplification for aptamer-based tumor detection: A bibliometric analysis

BACKGROUND

Malignant tumors are one of the leading causes of death worldwide, imposing a substantial economic and social burden. Early detection is the key to improving cure rates and reducing mortality rates, which requires the development of sensitive early detection technologies. Signal amplification techniques play a crucial role in aptamer-based early detection of tumors and are increasingly garnering attention from researchers.

AIM

To investigate the current research status, developmental trajectories, and hotspots in signal amplification for aptamer-based tumor detection through bibliometric analysis.

METHODS

English publications pertaining to signal amplification in aptamer-based tumor detection were retrieved from the Web of Science Core Collection database. VOSviewer and CiteSpace software were employed to analyze various information within this field, including countries, institutions, authors, co-cited authors, journals, co-cited journals, cited references, and keywords.

RESULTS

A total of 757 publications were included in this study. China accounted for 85.47% of all publications, with Nanjing University (China) emerging as the institution with the highest publication output. The most influential authors and journals were Hasanzadeh M. from Iran and "Biosensors and Bioelectronics", respectively. Exosomes and carcinoembryonic antigen (CEA) stood out as the most researched tumor-related molecules. Currently, the predominant signal amplification technique, nanomaterial, and signal transduction method were identified as hybridization chain reactions, gold nanoparticles, and electrochemical methods, respectively. Over the past 3 years, exosomes, CEA, electrochemical biosensors, and nanosheets have emerged as research hotspots, exhibiting a robust burst of intensity.

CONCLUSION

This study is the first bibliometric analysis of literature on signal amplification in aptamer-based tumor detection and elucidates the current status, hotspots, and prospective research directions within this realm. Additionally, it provides an important reference for researchers.

New advances in signal amplification strategies for DNA methylation detection in vitro

5-methylcytosine (5 mC) DNA methylation is a prominent epigenetic modification ubiquitous in the genome. It plays a critical role in the regulation of gene expression, maintenance of genome stability, and disease control. The potential of 5 mC DNA methylation for disease detection, prognostic information, and prediction of response to therapy is enormous. However, the quantification of DNA methylation from clinical samples remains a considerable challenge due to its low abundance (only 1% of total bases). To overcome this challenge, scientists have recently developed various signal amplification strategies to enhance the sensitivity of DNA methylation biosensors. These strategies include isothermal nucleic acid amplification and enzyme-assisted target cycling amplification, among others. This review summarizes the applications, advantages, and limitations of these signal amplification strategies over the past six years (2018-2023). Our goal is to provide new insights into the selection and establishment of DNA methylation analysis. We hope that this review will offer valuable insights to researchers in the field and facilitate further advancements in this area.

Recent advances in nucleic acid signal amplification-based aptasensors for sensing mycotoxins

Mycotoxin contamination in food products may cause serious health hazards and economic losses. The effective control and accurate detection of mycotoxins have become a global concern. Even though a variety of methods have been developed for mycotoxin detection, most conventional methods suffer from complicated operation procedures, low sensitivity, high cost, and long assay time. Therefore, the development of simple and sensitive methods for mycotoxin assay is highly needed. The introduction of nucleic acid signal amplification technology (NASAT) into aptasensors significantly improves the sensitivity and facilitates the detection of mycotoxins. Herein, we give a comprehensive review of the recent advances in NASAT-based aptasensors for assaying mycotoxins and summarize the principles, features, and applications of NASAT-based aptasensors. Moreover, we highlight the challenges and prospects in the field, including the simultaneous detection of multiple mycotoxins and the development of portable devices for field detection.

Recent developments and applications of surface enhanced Raman scattering spectroscopy in safety detection of fruits and vegetables

This article reviewed the latest research progress of Surface-enhanced Raman Spectroscopy (SERS) in the security detection of fruits and vegetables in recent years, especially in three aspects: pesticide residues, microbial toxin contamination and harmful microorganism infection. The binding mechanism and application potential of SERS detection materials (including universal type and special type) and carrier materials (namely rigid and flexible materials) were discussed. Finally, the application prospect of SERS in fruit and vegetable safety detection was explored, and the problems to be solved and development trends were put forward. The poor stability and reproducibility of SERS substrates make it difficult for practical applications. It is necessary to continuously optimize SERS substrates and develop small and portable Raman spectroscopy analyzers. In the future, SERS technology is expected to play an important role in human health, food safety and economy.

Electrochemical aptasensor based on DNA-templated copper nanoparticles and RecJf exonuclease-assisted target recycling for lipopolysaccharide detection

An electrochemical aptasensor for detecting lipopolysaccharides (LPS) was fabricated based on DNA-templated copper nanoparticles (DNA-CuNPs) and RecJf exonuclease-assisted target recycling. The DNA-CuNPs were synthesized on a double-stranded DNA template generated through the hybridization of the LPS aptamer and its complementary chain (cDNA). In the absence of LPS, the CuNPs were synthesized on DNA double-strands, and a strong readout corresponding to the CuNPs was achieved at 0.10 V (vs. SCE). In the presence of LPS, the fabricated aptamer could detach from the DNA double-strand to form a complex with LPS, disrupting the template for the synthesis of CuNPs on the electrode. Meanwhile, RecJf exonuclease could hydrolyze the cDNA together with this single-stranded aptamer, releasing the LPS for the next round of aptamer binding, thereby enabling target recycling amplification. As a result, the electrochemical signal decreased and could be used to indicate the LPS content. The fabricated electrochemical aptasensor exhibited an extensive dynamic working range of 0.01 pg mL-1 to 100 ng mL-1, and its detection limit was 6.8 fg mL-1. The aptasensor also exhibited high selectivity and excellent reproducibility. Moreover, the proposed aptasensor could be used in practical applications for the detection of LPS in human serum samples.

Facile and sensitive detection of mercury ions based on fluorescent structure-switching aptamer probe and exonuclease Ⅲ-assisted signal amplification

Hg2+ is highly toxic to human health and ecosystem. In this work, based on the unique fluorescent property of 2-Aminopurine (2-AP), the formation of T-Hg2+-T mismatch structure and the signal amplification of exonuclease III (Exo III) assisted target cycle, a fluorescent probe for facile and sensitive detection of Hg2+ is constructed. The hairpin-looped DNA probe is rationally designed with 2-AP embedded in the stem and thymine-rich recognition overhangs extended at the termini. The cleavage of the double stranded DNA stem with stable T-Hg2+-T pairs catalyzed by Exo III is prompted to happen upon recognition of trace Hg2+. Under the optimal reaction conditions, there is an excellent linear relationship between Hg2+ concentration and fluorescence intensity in the range of 7.5-200 nM with a detection limit of 0.38 nM. In addition, the detection results of Hg2+ in Songhua River water and fish samples are satisfactory. The fluorescent probe avoids labeling additional quenchers or quenching materials and has strong anti-interference ability. Thus, the fluorescent probe has a broad prospect in practical application.

Electrochemical aptasensor based on exonuclease III-mediated signal amplification for sensitive detection of vomitoxin in cornmeal

Vomitoxin (DON) residues in grains are of great concern to public health. Herein, a label-free aptasensor was constructed to detect DON distributed in grains. Cerium-based metal-organic framework composite gold nanoparticles (CeMOF@Au) were used as substrate materials to facilitate electron transfer and provided more binding sites for DNA. The separation of DON-aptamer (Apt) complex and cDNA was achieved by magnetic separation technique based on magnetic beads (MBs), ensuring the specificity of the aptasensor. Exonuclease III (Exo III)-assisted cDNA cycling process strategy would be triggered when cDNA was separated and introduced to the sensing interface for further signal amplification. Under optimal conditions, the constructed aptasensor presented a wide detection range from 1 × 10^-8 mg·mL^-1 to 5 × 10^-4 mg·mL^-1 for DON, and the detection limit was 1.79 × 10^-9 mg·mL^-1, including a satisfactory recovery in cornmeal sample spiked with DON. The results showed that the proposed aptasensor had high reliability and promising application potential in detecting DON.

Electrochemical Biosensor for Detection of the CYP2C19*2 Allele Based on Exonuclease Ⅲ

Currently, the therapeutic effect of clopidogrel differs considerably among individuals and is thought to be closely related to the genetic polymorphism of CYP2C19. The CYP2C19*2 gene can reduce the antiplatelet aggregation effect of clopidogrel, which increases the risk of major cardiovascular adverse events in patients. In this research, we report a new type of biosensor for the highly sensitive detection of the CYP2C19*2 gene based on exonuclease III assisted electric signal amplification and the use of calixarene to enrich electrical signal substances. Specifically, under the best conditions, the logarithmic concentrations of the analytes have a good linear relationship with the peak current in the range of 0.01 fM to 100 pM and the detection limit is 13.49 aM. The results have also shown that this method has good selectivity, high sensitivity, and stability, etc., and will provide a very promising application for the detection of the CYP2C19*2 gene and other biological molecules by replacing corresponding nucleic acid sequences.

A turn-on fluorescent strategy for alkaline phosphatase detection based on enzyme-assisted signal amplification

As a representative biochemical indicator, alkaline phosphatase (ALP) is of great importance in indicating and diagnosing clinical diseases. Herein, we developed a signal-on fluorescence sensing method for sensitive ALP activity detection based on the enzyme-assisted target recycling (EATR) technique. In this method, a two-step signal amplification process is designed. In the presence of ALP, the 3' phosphate group of an ss-DNA is removed explicitly by ALP, thus releasing free 3'-OH. Terminal deoxynucleotidyl transferase (TdT) can subsequently extend this substrate to generate poly(A) tails, converting the trace-level ALP information into multiple sequences and achieving the first-time amplification. A poly(T) Taqman probe labeled with FAM and BHQ1 provides the second one under the assistance of T7 exonuclease (T7 Exo) through alternate hybridization and degradation of ds-DNA regions. The previously quenched fluorescence is recovered due to the departure of FAM/BHQ1 during the cleavage of T7 Exo. Thus, taking advantage of template-free TdT-mediated polymerization and T7 Exo-based EATR, this strategy shows a sensitive LOD at 0.0074 U/L (S/N = 3) and a linear range of 0.01-8 U/L between ALP concentration and fluorescence intensity. To further verify the specificity and accuracy in practical application, we challenged it in a set of co-existing interference and biological environments and have gained satisfying results. The proposed method successfully quantified the ALP levels in clinical human serum samples, suggesting its applicability in practical application. Moreover, we have used this method to investigate the inhibition effects of Na₃VO₄. Above all, the proposed assay is sensitive, facile, and cost-effective for ALP determining, holding a promising perspective and excellent potential in clinical diagnosis and drug screening.

Quantitative Determination of Staphylococcus aureus Using Aptamer-Based Recognition and DNA Amplification Machinery

Staphylococcus aureus (S. aureus) is a common foodborne pathogen that threatens human health and safety. It is significant to develop sensitive detection methods for the monitoring of S. aureus contamination in food and environment. Herein, a novel machinery based on aptamer recognition, DNA walker, and rolling circle amplification (RCA) was designed, which can form unique DNA nanoflower and subsequently detect low-level S. aureus contamination in samples. To this end, two rationally designed DNA duplexes were modified on the surface of the electrode to identify S. aureus through the high affinity between aptamers and S. aureus. Combined with the repeated movement of DNA walker machinery on the electrode surface and RCA technology, a unique DNA nanoflower structure was formed. This can effectively transform the biological information of aptamer recognition of S. aureus into a significantly amplified electrochemical signal. Through reasonable design and optimization of the parameters of each part, the linear response range of the S. aureus biosensor is from 60 to 6 × 10⁷ CFU/mL and the detection limit is as low as 9 CFU/mL.

A label-free electrochemical aptasensor based on NH2-MIL-235(Fe) for the sensitive detection of citrinin

This study successfully developed a simple, specific, and ultrasensitive electrochemical aptasensor based on a label-free strategy for detecting citrinin (CIT). The NH₂-Fe-MOF nanomaterial has a large specific surface area, good biocompatibility, a simple preparation method, and low synthesis cost, so it was chosen as the aptamer's loading platform to improve the detection performance of the sensor. When CIT is present, the aptamer will specifically bind to it with a conformational change that prevents electron transfer to the electrode surface. Based on this, CIT could be quantitatively detected by measuring the change of differential pulse voltammetric (DPV) responses of the [Fe(CN)₆]^3-/4- peak current. Under optimized experimental conditions, the proposed aptasensor showed a low detection limit of 4.52 × 10^-11 g mL^-1 and a wide linear range of 0.1 to 1 × 10⁴ ng mL^-1. Furthermore, the proposed aptasensor shows excellent selectivity, reliable stability, and significant potential for the ultrasensitive detection of CIT in practical applications.

Aptasensor Based on Microfluidic for Foodborne Pathogenic Bacteria and Virus Detection: A Review

In today's world, which is entangled with numerous foodborne pathogenic bacteria and viruses, it appears to be essential to rethink detection methods of these due to the importance of food safety in our lives. The vast majority of detection methods for foodborne pathogenic bacteria and viruses have suffered from sensitivity and selectivity due to the small size of these pathogens. Besides, these types of sensing approaches can improve on-site detection platforms in the fields of food safety. In recent, microfluidics systems as new emerging types of portable sensing approaches can introduce efficient and simple biodevice by integration with several analytical methods such as electrochemical, optical and colorimetric techniques. Additionally, taking advantage of aptamer as a selective bioreceptor in the sensing of microfluidics system has provided selective, sensitive, portable and affordable sensing approaches. Furthermore, some papers use increased data transferability ability and computational power of these sensing platforms by exploiting smartphones. In this review, we attempted to provide an overview of the current state of the recent aptasensor based on microfluidic for screening of foodborne pathogenic bacteria and viruses. Working strategies, benefits and disadvantages of these sensing approaches are briefly discussed.

Target biorecognition-triggered assembly of a G-quadruplex DNAzyme-decorated nanotree for the convenient and ultrasensitive detection of antibiotic residues

The abuse of kanamycin (Kana) in many fields has led to increasing antibiotic pollution problems and serious threats to public health. Therefore, determining how to develop methods to realize the convenient detection of antibiotics in complicated environmental matrices is highly desirable. In this study, we utilized a target biorecognition-triggered hybridization chain reaction (HCR) assembly of a G-quadruplex DNAzyme (G-DNAzyme)-decorated nanotree to develop a novel homogeneous colorimetric biosensing method for the convenient and ultrasensitive detection of Kana antibiotic residues in real samples. Through the designed aptamer-recognition reaction, an Mg²⁺-dependent DNAzyme (MNAzyme) strand can be liberated. Thus, its catalyzed cleavage of the hairpin substrates anchored at a DNA nanowire will cause the assembled formation of an HCR-initiator; this process can be greatly amplified by the exonuclease III-assisted target recycling and the MNAzyme-catalyzed release of another MNAzyme strand. Based on the DNA-nanowire-accelerated HCR assembly of many G-DNAzyme-decorated DNA duplexes on the two sides of the nanowire, a DNA nanotree decorated by numerous G-DNAzymes will form to realize the ultrasensitive colorimetric signal output. Under the optimal conditions, this method exhibited a wide five-order-of-magnitude linear range and a very low detection limit of 28 fg mL^-1. In addition, excellent selectivity, repeatability, and reliability were also demonstrated for this homogeneous bioassay method. These unique features along with its automatic manipulation and low assay cost show promise for practical applications.

Dual CHA-mediated high-efficient formation of a tripedal DNA walker for constructing a novel proteinase-free dual-mode biosensing strategy

DNA walkers have been recognized as a type of powerful signal amplification tool for biosensors, but how to adopt a proper strategy to increase their amplification efficiency is still highly desirable. Herein we design a dual-catalytic hairpin assembly (CHA)-mediated strategy for the high-efficient formation of a tripedal Mg²⁺-dependent DNAzyme (MNAzyme)-DNA walker, and thus develop a novel proteinase-free dual-mode biosensing method for the kanamycin (Kana) antibiotic assay. The first CHA is initiated by a target-biorecognition reaction, which can produce the DNA walker and also induce the target recycling. The second CHA is initiated by a special base sequence designed as a one-half substrate of the MNAzyme. Upon the first CHA-triggered DNA walking at a magnetic bead (MB) track, this "pseudo-target" sequence can be released to induce another CHA-cycle for the formation of the same DNA walker. Meanwhile, the other one-half substrate strand exposed on the MB surface will trigger the quantitative hybridization chain reaction (HCR)-assembly of a G-quadruplex DNAzyme (G-DNAzyme)-enriched double-stranded DNA polymer. So the enzymatic reaction of G-DNAzymes enabled the convenient colorimetric and photoelectrochemical dual-mode signal transduction of the method. Due to the dual-CHA facilitation to the tripedal and three-dimensional DNA walking and synergetic signal amplification of HCR, this method exhibits very low detection limits of 9.4 and 0.55 fg mL^-1, respectively. In combination with its wide linear range, automated manipulation, and excellent selectivity, repeatability and reliability, the proposed method is expected to be used for the convenient semiquantitative screening and accurate determination of possible antibiotic residues in complicated matrices.

Emerging roles of the aptasensors as superior bioaffinity sensors for monitoring shellfish toxins in marine food chain

Shellfish toxins are derived from harmful algae and are easily accumulated in environment and marine food through the food chain, exposing high risks on human health. Preliminary rapid screening is one of the most effective monitoring ways to reduce the potential risks; however, the traditional methods encounter with many limitations, such as complicated procedures, low sensitivity and specificity, and ethical problems. Alternatively, bioaffinity sensors are proposed and draw particular attention. Among them, the aptasensors are springing up and emerging as superior alternatives in recent years, exhibiting high practicability to analyze shellfish toxins in real samples in the marine food chain. Herein, the latest research progresses of aptasensors towards shellfish toxins in the marine food chain in the past five years was reviewed for the first time, in terms of the aptamers applied in these aptasensors, construction principles, signal transduction techniques, response types, individual performance properties, practical applications, and advantages/disadvantages of these aptasensors. Synchronously, critical discussions were given and future perspectives were prospected. We hope this review can serve as a powerful reference to promote further development and application of aptasensors to monitor shellfish toxins, as well as other analytes with similar demands.

Signal enhancing strategies in aptasensors for the detection of small molecular contaminants by nanomaterials and nucleic acid amplification

Small molecular contaminants (such as mycotoxins, antibiotics, pesticide residues, etc.) in food and environment have given rise to many biological and ecological toxicities, which has attracted worldwide attention in recent years. Meanwhile, due to the advantages of aptamers such as high specificity and stability, easy synthesis and modification, as well as low cost and immunogenicity, various aptasensors for the detection of small molecular contaminants have been flourishing. An aptasensor as a whole is composed of an aptamer-based target recognizer and a signal transducer, which are fields of concentrated research. In the practical detection applications, in order to achieve the quantitative detection of small molecular contaminants at low abundance in real samples, a large number of signal enhancing strategies have been utilized in the development of aptasensors. Recent years is a vintage period for efficient signal enhancing strategies of aptasensors by the aid of nanomaterials and nucleic acid amplification that are applied in the elements for target recognition and signal conversion. Therefore, this paper meticulously reviews the signal enhancing strategies based on nanomaterials (including the (quasi-)zero-dimensional, one-dimensional, two-dimensional and three-dimensional nanomaterials) and nucleic acid amplification (including enzyme-assisted nucleic acid amplification and enzyme-free nucleic acid amplification). Furthermore, the challenges and future trends of the abovementioned signal enhancing strategies for application are also discussed in order to inspire the practitioners in the research and development of aptasensors for small molecular contaminants.

Advances in Surface-Enhanced Raman Scattering-Based Aptasensors for Food Safety Detection

Owing to the excellent performances of high sensitivity, high specificity, on-site detection, and multiplexing capability, surface-enhanced Raman scattering (SERS)-based aptasensors have performed prosperous applications and gained impressive progress in food safety. Herein, we reviewed the SERS-based aptasensors from the principles to specific applications in food safety. First, the sensor-working principles, SERS label design and preparation are introduced. Then, the popular platforms in the aptasensors are summarized with their advantages and disadvantages, followed by their representative applications. Further, the specific applications of developing SERS-based aptasensors in food safety are systematically provided. Moreover, the multiplex analysis using SERS labels are highlighted. Finally, challenges and perspectives for improving the SERS-based aptasensor performance are also discussed, aiming to give some proposes for researchers to choose suitable SERS-based aptasensors according to specific applications.

Ultrasensitive detection of PCB77 based on Exonuclease III-powered DNA walking machine

In view of the urgent need to determine polychlorinated biphenyls (PCBs) in the environment, we report a simple and sensitive electrochemical aptasensor to detect 3,3',4,4'-tetrachlorobiphenyl (PCB77) based on Exonuclease III-powered Deoxyribonucleic Acid (DNA) walking machine using poly (diallyldimethylammonium chloride) (PDDA), which was functionalized hollow porous graphitic carbon nitride/ Ni-Co hollow nanoboxes/ Au-Pd-Pt nanoflowers composite material. Upon the addition of PCB77, the specific binding between PCB77 and the aptamer (Apt) could trigger the Exo III-assisted cyclic amplification process and release unlocking probes to deblock the Swing arm/Blocker duplex. Finally, the hybridized hairpin 3 (HP3), a short oligonucleotide, was left on the electrode via Exo III digestion of hybridized HP2, and thus a strong methylene blue (MB) signal was obtained. As expected, the proposed aptasensor exhibits exceptional PCB77 detection performances with a very low detection limit of 5.13 pg/L and a wide linear range of 0.01-100 ng/L based on the calibration curve. Moreover, the aptasensor presents a high level of selectivity and stability, with an acceptable degree of reproducibility. The results of this study have indicated that the proposed aptasensor has great potential application prospects, as demonstrated by its successful use in real environmental water samples.

The Role of Aryldiazonium Chemistry in Designing Electrochemical Aptasensors for the Detection of Food Contaminants

Food safety monitoring assays based on synthetic recognition structures such as aptamers are receiving considerable attention due to their remarkable advantages in terms of their ability to bind to a wide range of target analytes, strong binding affinity, facile manufacturing, and cost-effectiveness. Although aptasensors for food monitoring are still in the development stage, the use of an electrochemical detection route, combined with the wide range of materials available as transducers and the proper immobilization strategy of the aptamer at the transducer surface, can lead to powerful analytical tools. In such a context, employing aryldiazonium salts for the surface derivatization of transducer electrodes serves as a simple, versatile and robust strategy to fine-tune the interface properties and to facilitate the convenient anchoring and stability of the aptamer. By summarizing the most important results disclosed in the last years, this article provides a comprehensive review that emphasizes the contribution of aryldiazonium chemistry in developing electrochemical aptasensors for food safety monitoring.

Development of DNA Biosensors Based on DNAzymes and Nucleases

DNA biosensors play important roles in environmental, medical, industrial and agricultural analysis. Many DNA biosensors have been designed based on the enzyme catalytic reaction. Because of the importance of enzymes in biosensors, we present a review on this topic. In this review, the enzymes were divided into DNAzymes and nucleases according to their chemical nature. Firstly, we introduced the DNAzymes with different function inducing cleavage, metalation, peroxidase, ligation and allosterism. In this section, the G-quadruplex DNAzyme, as a hot topic in recent years, was described in detail. Then, the nucleases-assisted signal amplification method was also reviewed in three categories including exonucleases, endonucleases and other nucleases according to the digestion sites in DNA substrates. In exonucleases section, the Exo I and Exo III were selected as examples. Then, the DNase I, BamH I, nicking endonuclease, S1 nuclease, the duplex specific nuclease (DSN) and RNases were chosen to illustrate the application of endonucleases. In other nucleases section, DNA polymerases and DNA ligases were detailed. Last, the challenges and future perspectives in the field were discussed.

Exonuclease III-Driven Dual-Amplified Electrochemical Aptasensor Based on PDDA-Gr/PtPd@Ni-Co Hollow Nanoboxes for Chloramphenicol Detection

Herein, a hierarchically porous Zr-MOF-labeled electrochemical aptasensor based on the composite of PtPd@Ni-Co hollow nanoboxes (PtPd@Ni-Co HNBs) and poly (diallyldimethylammonium chloride)-functionalized graphene (PDDA-Gr) was developed for ultrasensitive detection of chloramphenicol (CAP). PtPd@Ni-Co HNBs have excellent conductivity and provide binding sites for aptamers; the functionalized PDDA-Gr improves its dispersibility and conductivity as a substrate material, which can be successfully used to increase the electrode surface area and support more PtPd@Ni-CoHNBs. Besides, hierarchically porous Zr-MOFs (HP-UiO-66) were utilized as signal probes and showed a stronger load capacity for signal molecules than conventional UiO-66. In the presence of CAP, two ingeniously designed Exo III-assisted cyclic amplification strategies further improved the sensitivity of the aptasensor: CAP causes cycle I to release a large amount of trigger DNA (Tr DNA), and then, Tr DNA initiated cycle II, which causes the exposed capture DNA to further bind the signal probes. With these advantages, the constructed aptasensors performed with satisfactory sensitivity in a wide linear range (10 fM-10 nM) and a detection limit of 0.985 fM. Several signal amplification strategies adopted in this study have effectively improved the performance of the sensor, providing a new avenue for the development of ultrasensitive sensors in the food analysis field.

Fe3O4@polydopamine and Exo III-assisted homogeneous biorecognition reaction for convenient and ultrasensitive detection of kanamycin antibiotic

Herein, we report a Fe3O4@polydopamine (PDA) nanocomposite and exonuclease III (Exo III)-assisted homogeneous fluorescence biosensing method for ultrasensitive detection of kanamycin (Kana) antibiotic. A hairpin DNA containing the Kana-aptamer sequence (HP) was first designed for the highly specific biorecognition of the target analyte. Because of the aptamer biorecognition-induced structural change of HP and the highly effective catalyzed reaction of Exo III, a large amount of fluorophore labels were released from the designed fluorescence DNA probe. During the homogeneous reaction process, the Exo III-assisted dual recycling significantly amplified the fluorescence signal output. Moreover, the excessive probes were easily adsorbed and separated by the Fe3O4@PDA nanocomposite, which decreased the background signal and increased the signal-to-noise ratio. These strategies result in the excellent analytical performance of the method, including a very low detection limit of 0.023 pg mL-1 and a very wide linear range of six orders of magnitude. In addition, this method has convenient operation, excellent selectivity, repeatability and satisfactory reliability, and does not involve the design and utilization of complicated DNA sequences. Thus, it exhibits a promising prospect for practical applications.

Improving the Sensitivity of the miRNA Assay Coupled with the Mismatched Catalytic Hairpin Assembly Reaction by Optimization of Hairpin Annealing Conditions

The mismatched catalytic hairpin assembly (mCHA), a programmable oligonucleotide circuit, is one of the promising isothermal amplification methods used in nucleic acid detection. Its limitations are related to a high background noise observed due to the target-independent hybridization of the reacting hairpins (HPs). In this work, it was shown that the introduction of salts such as NaCl and MgCl₂ to HP1/HP2 annealing solutions sharply reduces the background in mCHA and simultaneously increases the signal-to-background (S/B) ratio. A comparison of the salts demonstrated the higher activity of MgCl₂ as compared to NaCl. A similar effect of reducing the background was observed with a decrease in the concentration of H1/H2 probes in annealing solutions. Using the favorable annealing conditions allowed the development of an ultrasensitive chemiluminescence assay coupled with mCHA for miRNA quantitation. Except mCHA, the use of a streptavidin-polyHRP conjugate and an enhanced chemiluminescence reaction additionally increased the assay sensitivity. Notably, the optimization of the HP annealing diminished the detection limit of the assay by 2 orders of magnitude and increased the sensitivity and precision of miRNA-141 determination. The discovered fact of reducing the background by the variation of HP annealing conditions may be valuable not only for the mCHA performance but also likely for other HP-based biochemical methods.

Nuclease-assisted target recycling signal amplification strategy for graphene quantum dot-based fluorescent detection of marine biotoxins

Saxitoxin (STX) is a major marine toxin from shellfish, and it is responsible for paralytic shellfish poisoning (PSP). In this study, a highly sensitive and rapid aptamer assay was developed for STX detection by combining fluorescence resonance energy transfer (FRET) and nuclease-assisted target recycling signal amplification. The aptamer STX-41 conjugated with graphene quantum dots (GQDs) was adsorbed on magnetic reduced graphene oxide (MRGO) to establish a fluorescence quenching system. Then, the binding between STX and aptamer induced the desorption of GQD-aptamer from MRGO and the restoring of fluorescence for the fluorescent determination of STX. The digestion of the target bound aptamer by DNase I could release the target for recycling thus achieving signal amplification. Under the optimized conditions, the aptamer assay showed a wide detection range (0.1-100 ng·mL^-1), low detection limit (LOD of 0.035 ng·mL^-1), high specificity, good recovery (86.75-94.08% in STX-spiked clam samples) and repeatability (RSD of 4.27-7.34%). Combined with fluorescent detection technology, signal amplification technology, and magnetic separation technology, the proposed method can be used to detect STX in seafood products successfully.

Construction of DNA Biosensors for Mercury (II) Ion Detection Based on Enzyme-Driven Signal Amplification Strategy

Mercury ion (Hg²⁺) is a well-known toxic heavy metal ion. It is harmful for human health even at low concentrations in the environment. Therefore, it is very important to measure the level of Hg²⁺. Many methods, reviewed in several papers, have been established on DNA biosensors for detecting Hg²⁺. However, few reviews on the strategy of enzyme-driven signal amplification have been reported. In this paper, we reviewed this topic by dividing the enzymes into nucleases and DNAzymes according to their chemical nature. Initially, we introduce the nucleases including Exo III, Exo I, Nickase, DSN, and DNase I. In this section, the Exo III-driven signal amplification strategy was described in detail. Because Hg²⁺ can help ssDNA fold into dsDNA by T-Hg-T, and the substrate of Exo III is dsDNA, Exo III can be used to design Hg²⁺ biosensor very flexibly. Then, the DNAzyme-assisted signal amplification strategies were reviewed in three categories, including UO₂²⁺-specific DNAzymes, Cu²⁺-specific DNAzymes and Mg²⁺-specific DNAzymes. In this section, the Mg²⁺-specific DNAzyme was introduced in detail, because this DNAzyme has highly catalytic activity, and Mg²⁺ is very common ion which is not harmful to the environment. Finally, the challenges and future perspectives were discussed.

Gold nanoparticle-assisted plasmonic enhancement for DNA detection on a graphene-based portable surface plasmon resonance sensor

The impact of different gold nanoparticle (GNP) structures on plasmonic enhancement for DNA detection is investigated on a few-layer graphene (FLG) surface plasmon resonance (SPR) sensor. Two distinct structures of gold nano-urchins (GNu) and gold nanorods (GNr) were used to bind the uniquely designed single-stranded probe DNA (ssDNA) of Mycobacterium tuberculosis complex DNA. The two types of GNP-ssDNA mixture were adsorbed onto the FLG-coated SPR sensor through the π-π stacking force between the ssDNA and the graphene layer. In the presence of complementary single-stranded DNA, the hybridization process took place and gradually removed the probes from the graphene surface. From SPR sensor preparation, the annealing process of the Au layer of the SPR sensor effectively enhanced the FLG coverage leading to a higher load of the probe DNA onto the sensing interface. The FLG was shown to be effective in providing a larger surface area for biomolecular capture due to its roughness. Carried out in the DNA hybridization study with the SPR sensor, GNu, with its rough and spiky structures, significantly reinforced the overall DNA hybridization signal compared with GNr with smooth superficies, especially in capturing the probe DNA. The DNA hybridization detection assisted by GNu reached the femtomolar range limit of detection. An optical simulation validated the extreme plasmonic field enhancement at the tip of the GNu spicules. The overall integrated approach of the graphene-based SPR sensor and GNu-assisted DNA detection provided the proof-of-concept for the possibility of tuberculosis disease screening using a low-cost and portable system to be potentially applied in remote or third-world countries.

Sensitive detection of RNA based on concatenated self-fuelled strand displacement amplification and hairpin-AgNCs

Herein, a self-fuelled amplification strategy (SFAS) is proposed, in which two strand displacement amplification (SDA) processes were concatenated for the proliferation of ssDNA. The ssDNA then initiated a polymerase action and caused the destruction of hairpin-templated silver nanoclusters (AgNCs), resulting in decreased fluorescence for sensing miRNA-21. This SFAS-based sensor is less complicated in design and facile in operation, because of the easy concatenation of SDA and mutual enzymes used in the signal output process. The sensitivity of this SFAS-based miRNA sensor was 1.78 × 10^-11 M with a linear relationship in the range 0.02-1.0 × 10^-9 M, and the recoveries of this method ranged from 82.07% to 106.58% with an average RSD of 10.96%.

An electrochemical aptasensor based on PEI-C3N4/AuNWs for determination of chloramphenicol via exonuclease-assisted signal amplification

An electrochemical aptasensor, including the polyethyleneimine-graphite-like carbon nitride/Au nanowire nanocomposite (PEI-C₃N₄/AuNWs) and exonuclease-assisted signal amplification strategy was constructed for the determination of chloramphenicol (CAP). Initially, a nanocomposite with substantial electrocatalytic property was synthesized by PEI-C₃N₄/AuNWs. This improves the conductivity and specific surface area of the PEI-C₃N₄/AuNW-modified gold electrode. Next, a DNA with a complementary sequence to a CAP aptamer (cDNA) was immobilized on the PEI-C₃N₄/AuNW-modified electrode, followed by the CAP aptamer hybridized with cDNA. The lower signal at this time is due to the negatively charged phosphate group of the oligonucleotide and [Fe (CN)₆]^3-/4- electrostatically repelling each other. The presence of the CAP would cause aptamer on the electrode surface to fall off and be digested by Recjf exonuclease, which resulted in target recycling, and a significant increase in DPV signal can be observed at a potential of 0.176 V (vs. Ag/AgCl). Under optimal conditions, there is a linear relationship between the peak current and the logarithm of CAP concentration in the range 100 fM-1 μM, and the detection limit of this aptasensor is 2.96 fM (S/N = 3). Furthermore, the resultant aptasensor has excellent specificity, reproducibility, and long-term stability, and has been applied to the detection of CAP in milk samples. Graphical abstract The detection principle of the electrochemical aptasensor for CAP detection was based on PEI-C₃N₄/AuNWs and exonuclease-assistant signal amplification. It is based on the fact that PEI-C3N4/AuNWs nanocomposites on the surface of the electrode can effectively improve the performance of the aptasensor, and Recjf exonuclease initiates the target recycling process, causes signal amplification.

Aptamers used for biosensors and targeted therapy

Aptamers are single-stranded nucleic acid sequences that can bind to target molecules with high selectivity and affinity. Most aptamers are screened in vitro by a combinatorial biology technique called systematic evolution of ligands by exponential enrichment (SELEX). Since aptamers were discovered in the 1990s, they have attracted considerable attention and have been widely used in many fields owing to their unique advantages. In this review, we present an overview of the advancements made in aptamers used for biosensors and targeted therapy. For the former, we will discuss multiple aptamer-based biosensors with different principles detected by various signaling methods. For the latter, we will focus on aptamer-based targeted therapy using aptamers as both biotechnological tools for targeted drug delivery and as targeted therapeutic agents. Finally, challenges and new perspectives associated with these two regions were further discussed. We hope that this review will help researchers interested in aptamer-related biosensing and targeted therapy research.

A molecular device: A DNA molecular lock driven by the nicking enzymes

As people are placing more and more importance on information security, how to realize the protection of information has become a hotspot of current research. As a security device, DNA molecular locks have great potential to realize information protection at the molecular level. However, building a highly secure molecular lock is still a serious challenge. Therefore, taking advantage of the DNA strand displacement and enzyme control technology, we constructed a molecular lock with a self-destructive mechanism. This molecular lock is mainly composed of logic circuits and takes nicking enzymes as inputs. To build this molecular lock, we first constructed a series of cascade circuits, including a YES–YES cascade circuit and a YES–AND cascade circuit. Then, an Inhibit logic gate was constructed to explore the inhibitory properties between different combinations of two nicking enzymes. Finally, using the characteristics of mutual inhibition between several enzymes, a DNA molecular lock driven by three nicking enzymes was constructed. In this molecular device, only the correct sequence of nicking enzymes can be input to ensure the normal operation of the molecular lock. Once the wrong password is entered, the device will be destroyed and cannot be recovered, which effectively prevents intruders from cracking the lock through exhaustive methods. The molecular lock has the function of simulating an electronic keyboard, which can realize the protection of information at the molecular level, and provides a new implementation method for building more advanced and complex molecular devices.

Aptamer-integrated nucleic acid circuits for biosensing: Classification, challenges and perspectives

Owing to their high programmability and modularity, autonomous enzyme-free nucleic acid circuits are attracting ever-growing interest as signal amplifiers with potential applications in developing highly sensitive biosensing techniques. Besides nucleic acid input, the biosensing scope of aptamer-integrated nucleic acids could be further expanded to non-nucleic targets by integrating nucleic acid circuits with aptamers-a class of functional oligonucleotides with binding capabilities toward specific targets. By coupling upstream target recognition with downstream signal amplification, aptamer-integrated nucleic acid circuits enable aptasensors with increased sensitivity and enhanced performances, which may act as powerful tools in various fields including environment monitoring, personal care, clinical diagnosis, etc. In designing aptamer-integrated nucleic acid circuits, smart integration between aptamer and nucleic acid circuits plays a crucial role in developing reliable circuits with good performances. To date, although there are plenty of published researches adopting aptamer-integrated nucleic acid circuits as amplifiers in biosensing systems, deep discussion or systematic review on rational design strategies for aptamer-integrated nucleic acid circuits is still lacking. To fill this gap, rational aptamer-nucleic acid circuits integration modes were classified and summarized for the first time based on reviewing the state of art of existing aptamer-integrated nucleic acid circuits. Moreover, theoretical updates in nucleic acid circuits designs and major challenges to be overcome in developing highly sensitive aptamer-integrated nucleic acids based biosensing systems are discussed in this review.

Silver nanoclusters-based fluorescent biosensing strategy for determination of mucin 1: Combination of exonuclease I-assisted target recycling and graphene oxide-assisted hybridization chain reaction

A novel label-free fluorescent biosensing strategy was described for the sensitive detection of mucin 1 (MUC1). It consisted of an M-shaped aptamer probe for exonuclease I (Exo I)-assisted target recycling (EATR) amplification, and two AgNCs-hairpin probes for graphene oxide (GO)-assisted hybridization chain reaction (HCR) amplification. Based on the specificity of aptamer-target recognition, the addition of MUC1 caused a conformational change in the M-shaped aptamer probe, which was split into a MUC1-P3 complex and a P1-P2 duplex. Exo I then catalyzed the cleavage of aptamer sequence P3 from the MUC1-P3 complex and released the target MUC1. The released target MUC1 was free to bind with a new M-shaped probe to perform EATR amplification. Furthermore, the P1-P2 duplex with three single-stranded arms can act as a primer to initiate HCR between hairpin probes AgNCs-H1 and AgNCs-H2. In the process of HCR, two AgNCs-hairpins were autonomously cross-opened, generating long linear double-stranded nanowires containing large numbers of AgNCs. These nanowires cannot be quenched by GO due to the weak affinity between the long double-stranded DNA and GO, thereby retaining a strong fluorescent signal indicative of the concentration of MUC1. With these designs, in addition to an extremely low detection limit of 0.36 fg mL^-1, the method exhibited an acceptable linear response to detect MUC1 from 1 fg mL^-1 to 1 ng mL^-1. Additionally, this method could be exerted with a high degree of success to detect MUC1 in diluted human serum with satisfactory results.

Terminal deoxynucleotidyl transferase based signal amplification for enzyme-linked aptamer-sorbent assay of colorectal cancer exosomes

Exosomes have received increasingly significant attention and have shown great clinical value as biomarkers for a number of diseases. However, there is still a lack of a highly sensitive and visualized method for the detection of exosomes in numerous samples simultaneously. Here, we developed a high-throughput, colorimetric and simple method to detect colorectal cancer (CRC) exosomes based on terminal deoxynucleotidyl transferase (TdT)-aided ultraviolet signal amplification. Anti-A33, a CRC exosomal protein marker, was selected as a capture probe, and a facility-prepared EpCAM (CRC exosomal protein) aptamer-Au-primer complex was used as a signal probe. After the CRC exosomes were captured onto the surface of 96-well plates, the primer was extended to the poly(biotin-adenine) chains with the help of TdT, resulting in an increase in the binding amount of avidin-modified horseradish peroxidase (Av-HRP) for H₂O₂-mediated oxidation of 3,3',5,5'-tetramethyl benzidine (TMB) in enzyme-linked aptamer-sorbent assay (ELASA). The results showed that the incorporation of ploy(biotin-A) enabled approximately 10.4-fold signal amplification. This approach achieved a linear range of 9.75 × 10³-1.95 × 10⁶ particles/μL for CRC cell-derived exosomes. The feasibility of the developed assay was evaluated using clinical serum samples. CRC patients (n = 16) could be clearly and successfully distinguished from healthy individuals (n = 9). Furthermore, this proposed platform holds considerable potential for the detection of different targets, simply by changing the aptamer and antibody.

An electroanalytical platform for nereistoxin-related insecticide detection based on DNA conformational switching and exonuclease III assisted target recycling

In this work, an electroanalytical platform for nereistoxin (NRT)-related insecticide detection is proposed on the basis of NRT induced DNA conformational switching and exonuclease III (Exo III) assisted target recycling. NRT-related insecticides were first hydrolyzed and converted into NRT with two thiol groups (-SH). Then, a cytosine-Ag+-cytosine (C-Ag+-C) mismatched base pair was adopted to induce a blunt-ended hairpin configuration of HP DNA. In the presence of converted NRT, it could take up Ag+ from HP DNA to change its conformation from a hairpin to single-stranded structure (HP ssDNA). Thereafter, the obtained HP ssDNA was further hybridized with an H1 hairpin probe on the electrode surface to trigger the Exo III cleavage process, releasing HP ssDNA for recycling leaving the G-quadruplex fragment of H1, which was used for hemin/G-quadruplex complex formation. The reversible redox reaction of Fe(iii)/Fe(ii) of hemin gave a remarkable electrochemical response for quantitative determination of the NRT-related insecticides. As an analytical model, a low detection limit of 3.9 ng L-1 and a wide linear range of 0.01-1500 μg L-1 with excellent selectivity were achieved for cartap detection. The proposed method also displayed great applicability for cartap detection in agricultural products.

Isothermal Nucleic Acid Amplification Techniques and Their Use in Bioanalysis

Recently, there has been a rapid progress in the development of techniques for isothermal amplification of nucleic acids as an alternative to polymerase chain reaction (PCR). The advantage of these methods is that the nucleic acids amplification can be carried out at constant temperature, unlike PCR, which requires cyclic temperature changes. Moreover, isothermal amplification can be conducted directly in living cells. This review describes the principles of isothermal amplification techniques and demonstrates their high efficiency in designing new highly sensitive detection methods of nucleic acids and enzymes involved in their modifications. The data on successful application of isothermal amplification methods for the analysis of cells and biomolecules with the use of DNA/RNA aptamers are presented.

A fluorometric aptamer-based assay for ochratoxin A by using exonuclease III-assisted recycling amplification

A fluorometric assay is described for ochratoxin A (OTA) using an aptamer. The method is based on exonuclease-assisted recycling amplification. The OTA-binding aptamer partially hybridizes with complementary DNA (cDNA) that is released when the aptamer recognizes OTA. Then, cDNA hybridizes with a specifically designed hairpin DNA. Next, short ssDNA and cDNA are, respectively, released by exonuclease III catalyzed hydrolysis of the dsDNA. The cDNA induces the next ring opening and digestion. The short ssDNA captures the sDNA that is labeled with fluorescent FAM and is absorbed on graphene oxide (GO). The green fluorescence of the sDNA/GO system is quenched but is recovered if the sDNA is released from GO. This assay is high sensitive, works in the 5 nM to 200 nM OTA concentration range and has a 0.96 nM lower detection limit. It was applied to the quantitation of OTA in spiked wine and coffee samples. Graphical abstractSchematic of a fluorometric assay based on exonuclease-assisted recycling amplification for quantitative monitoring of OTA without the need of sample separation and multiple washing steps.

Hybridization chain reaction-enhanced enzyme biomineralization for ultrasensitive colorimetric biosensing of a protein biomarker

By employment of an aptamer-initiated hybridization chain reaction (HCR) to enhance the enzyme biomineralization of cupric subcarbonate, this work develops a novel colorimetric biosensing method for protein analysis. The HCR product was used to specifically attach a large amount of urease-functionalized gold nanoparticles (Au NPs) for the preparation of a gold nanoprobe. After the sandwich biorecognition reactions, this nanoprobe could be quantitatively captured onto the antibody-functionalized magnetic bead (MB) platform. Then, numerous copper ions would be enriched onto the MB surface through the urease-induced biomineralization of cupric subcarbonate. Based on the complete release of Cu2+ ions for the sensitive copper chromogenic reaction, convenient colorimetric signal transduction was thus achieved for the quantitative analysis of the target analyte of the carcinoembryonic antigen. The HCR product provides a large number of biotin sites for the attachment of Au NP nanotags. The biomineralization reaction of high-content urease loaded onto Au NPs leads to highly efficient Cu2+ enrichment for signal amplification. So this method features excellent performance including a very wide linear range and a low detection limit down to 0.071 pg mL-1. In addition, the satisfactory results of real sample experiments reveal that this method possesses huge potential for practical applications.

Detection of microRNA using enzyme-assisted amplifying and DNA-templated silver nanoclusters signal-off fluorescence bioassay

A Simple and fast analysis strategy of fluorescence quenching based on DNA-templated silver nanoclusters was developed for detection of miR-122 related to diseases such as human liver. We used Exo III to cleave the silver cluster template and assist in the DNA-RNA complex cycle. When the target is absent, the silver cluster template remains intact, and DNA-AgNCs are generated under the action of AgNO₃/NaBH₄, producing a strong background fluorescence signal. Once the target is added, the site of the Exo III occurs after a series of hybridization cycles, the Exo III acts, the template DNA is continuously hydrolyzed, and the fluorescence intensity of the system is significantly reduced. By comparing the changes in the fluorescence signal, we found that this strategy has good sensitivity and the detection limit is as low as 84.0 pM. The strategy also has excellent discriminating ability and good selectivity, it can provide a persuasive reference for the early diagnosis of liver cancer and hepatitis.

Review of Electrochemical DNA Biosensors for Detecting Food Borne Pathogens

The vital importance of rapid and accurate detection of food borne pathogens has driven the development of biosensor to prevent food borne illness outbreaks. Electrochemical DNA biosensors offer such merits as rapid response, high sensitivity, low cost, and ease of use. This review covers the following three aspects: food borne pathogens and conventional detection methods, the design and fabrication of electrochemical DNA biosensors and several techniques for improving sensitivity of biosensors. We highlight the main bioreceptors and immobilizing methods on sensing interface, electrochemical techniques, electrochemical indicators, nanotechnology, and nucleic acid-based amplification. Finally, in view of the existing shortcomings of electrochemical DNA biosensors in the field of food borne pathogen detection, we also predict and prospect future research focuses from the following five aspects: specific bioreceptors (improving specificity), nanomaterials (enhancing sensitivity), microfluidic chip technology (realizing automate operation), paper-based biosensors (reducing detection cost), and smartphones or other mobile devices (simplifying signal reading devices).

A novel electrochemical aptasensor for fumonisin B1 determination using DNA and exonuclease-I as signal amplification strategy

In this work, using DNA and exonuclease-I (Exo-I) as signal amplification strategy, a novel and facile electrochemical aptasensor was constructed for fumonisin B₁ (FB₁) detection. The G-rich complementary DNA (cDNA) was immobilized onto the electrode surface. Then, aptamer of FB₁ was hybridized with cDNA to form double-stranded DNA. In the absence of FB₁, double-stranded DNA and G-rich cDNA on the electrode surface promoted effectively methylene blue (MB) enrichment and amplified the initial electrochemical response. In the presence of FB₁, the combination of aptamer and FB₁ led to the release of aptamer from the electrode surface and the expose of 3' end of single-stranded cDNA. When Exo-I was added onto the electrode surface, the single-stranded cDNA was degraded in the 3'-5' direction. The decrease of double-stranded DNA and G-rich cDNA resulted in the less access of MB to the electrode surface, which decreased the electrochemical signal. The experimental conditions including incubation time of FB₁, the amount of Exo-I and incubation time of Exo-I were optimized. Under the optimal conditions, the linear relationship between the change of peak current and the logarithmic concentration of FB₁ was observed in the range of 1.0 × 10^-3-1000 ng mL^-1 with a low limit of detection of 0.15 pg mL^-1. The experimental results showed that the prepared aptasensor had acceptable specificity, reproducibility, repeatability and stability. Therefore, this proposed aptasensor has a potential application in the food safety detection.

Exonuclease-assisted target recycling for ultrasensitive electrochemical detection of microRNA at vertically aligned carbon nanotubes

As an important biomarker for early disease diagnosis, microRNA-21 (miRNA-21) has attracted considerable attention owing to its accurate detection. Herein we combine the one-step biorecognition reaction at a vertically aligned nanostructure-based biosensor with the T7 exonuclease (Exo)-assisted target recycling to develop a novel electrochemical bioassay method for miRNA-21 detection. The vertically aligned nanointerface is constructed through the covalent attachment of terminally carboxylated single-walled carbon nanotubes (SWCNTs) at an aryldiazonium salt-modified electrode, which enables the noncovalent adsorption of a ferrocene-labeled single-stranded signal DNA to obtain the biosensor. Upon its incubation with a target miRNA-21 solution, DNA/RNA hybridized duplexes will form and release from the electrode surface, leading to the corresponding electrochemical signal decrease of the biosensor. Moreover, this biorecognition reaction can also trigger the T7 Exo-assisted target recycling to achieve great signal amplification. Together with the highly efficient biorecognition and excellent electron transfer promotion at the vertically aligned SWCNTs, this biosensor exhibits a wide linear range varying from 0.01 to 100 pM and a low detection limit down to 3.5 fM. Considering its obvious performance superiority and convenient manipulations, this vertically aligned SWCNT-based electrochemical biosensing method has extensive potential for practical applications.

Aptamer biorecognition-triggered DNAzyme liberation and Exo III-assisted target recycling for ultrasensitive homogeneous colorimetric bioassay of kanamycin antibiotic

A novel peroxidase-mimicking DNAzyme-based colorimetric homogenous bioassay is developed for kanamycin detection. Aptamer biorecognition triggers DNAzyme liberation from DNA duplexes for "off-on" signal transduction. The special hairpin structure of the aptamer-kanamycin biocomposite enables Exo III-assisted target recycling for signal amplification.