A single dual-emissive nanofluorophore test paper for highly sensitive colorimetry-based quantification of blood glucose

A Ratiometric Biosensor Containing Manganese Dioxide Nanosheets and Nitrogen-Doped Quantum Dots for 2,4-Dichlorophenoxyacetic Acid Monitoring

Nanomaterials are desirable for sensing applications. Therefore, MnO2 nanosheets and nitrogen-doped carbon dots (NCDs) were used to construct a ratiometric biosensor for quantification of 2,4-dichlorophenoxyacetic acid. The MnO2 nanosheets drove the oxidation of colorless o-phenylenediamine to OPDox, which exhibits fluorescence emission peaks at 556 nm. The fluorescence of OPDox was efficiently quenched and the NCDs were recovered as the ascorbic acid produced by the hydrolyzed alkaline phosphatase (ALP) substrate increased. Owing to the selective inhibition of ALP activity by 2,4-D and the inner filter effect, the fluorescence intensity of the NCDs at 430 nm was suppressed, whereas that at 556 nm was maintained. The fluorescence intensity ratio was used for quantitative detection. The linear equation was F = 0.138 + 3.863·C 2,4-D (correlation coefficient R2 = 0.9904), whereas the limits of detection (LOD) and quantification (LOQ) were 0.013 and 0.040 μg/mL. The method was successfully employed for the determination of 2,4-D in different vegetables with recoveries of 79%~105%. The fluorescent color change in the 2,4-D sensing system can also be captured by a smartphone to achieve colorimetric detection by homemade portable test kit.

Highly Fluorescent ZnO Composite of N-doped Carbon Dots From Dregea Volubilis for Fluorometric Determination of Glucose in Biological Samples

A nano-sensor based on N-doped carbon dots (NCDs)@ZnO (NCZ) composite was fabricated and efficacy for detecting glucose from human blood and urine samples in a straightforward manner was examined. The composite was prepared following a green hydrothermal method under ambient condition using a novel plant material, Dregea volubilis fruit and structural and optical properties were evaluated using standard techniques. The composite exhibited excellent characteristics including good photostability, biocompatibility, low toxicity, and strong fluorescence, with a decent quantum yield of up to 59%. The NCZ composite has been very sensitive and could selectively detect glucose in urine and blood samples. Selective glucose quenching was efficacious at different concentrations of glucose (1-6 mM) and in the pH range of 7-8, limit of detection was 0.25 mM. The potential uses of carbon-based materials have grown, thanks to the excellent sensing/detection capabilities of the NCZ composite as well as the capacity to prevent nanoparticle aggregation, opening up new possibilities for the development of environmentally benign nano-sensors.

Controlling Fluorescent Readout in Paper-based Analytical Devices

Paper is an ideal candidate for the development of new disposable diagnostic devices because it is a low-cost material, allows transport of the liquid on the device by capillary action, and is environmentally friendly. Today, colorimetric analysis is most often used as a detection method for rapid tests (test strips or lateral flow devices) but usually gives only qualitative results and is limited by a relatively high detection threshold. Here, we describe studies using fluorescence as a readout tool for paper-based diagnostics. We study how the optical readout is affected by light transmission, scattering, and fluorescence as a function of paper characteristics such as thickness (grammage), water content, autofluorescence, and paper type/composition. We show that paper-based fluorescence analysis allows better optical readout compared to that of nitrocellulose, which is currently the material of choice in colorimetric assays. To reduce the loss of analyte molecules (e.g., proteins) due to adsorption to the paper surface, we coat the paper fibers with a protein-repellent hydrogel. For this purpose, we use hydrophilic copolymers consisting of N,N-dimethyl acrylamide and a benzophenone-based cross-linker, which are photochemically transformed into a fiber-attached polymer hydrogel on the paper fiber surfaces in situ. We show that the combination of fluorescence detection and the use of a protein-repellent coating enables sensitive paper-based analysis. Finally, the success of the strategy is demonstrated by using a simple LFD application as an example.

A new formulation of Ni/Zn bi-metallic nanocomposite and evaluation of its applications for pollution removal, photocatalytic, electrochemical sensing, and anti-breast cancer

Nanocomposites have gained attention due to their variety of applications in different fields. In this research, we have reported a green synthesis of a bi-metallic nanocomposite of nickel and zinc using an aqueous extract of Citrus sinensis in the presence of chitosan (Ni/Zn@orange/chitosan). The nanocomposite was characterized using different techniques. We have examined various applications for Ni/Zn@orange/chitosan. The NPs were manufactured in spherical morphology with a particle range size of 17.34-90.51 nm. Ni/Zn@orange/chitosan showed an acceptable ability to remove dyes of Congo red and methyl orange from an aqueous solution after 80 min furthermore, it uptaking the drug mefenamic acid from a solution. Ni/Zn@orange/chitosan also exhibited great photocatalytic activity in synthesizing benzimidazole using benzyl alcohol and o-phenylenediamine. Ni/Zn@orange/chitosan was found as a potent electrochemical sensor to determine glucose. In the molecular and cellular section of the current research, the cells with composite nanoparticles were studied by MTT way about the anti-breast adenocarcinoma potentials malignant cell lines. The IC50 of composite nanoparticles were 320, 460, 328, 500, 325, 379, 350, and 396 μg/mL concering RBA, NMU, SK-BR-3, CAMA-1, MCF7, AU565, MDA-MB-468, and Hs 281.T breast adenocarcinoma cell lines, respectively. The results revealed the newly synthesized nanocomposite is a potent photocatalyst, dye pollution removal agent, and an acceptable new drug to treat breast cancer.

Glucose Biosensor Based on Glucose Oxidase Immobilized on BSA Cross-Linked Nanocomposite Modified Glassy Carbon Electrode

Glucose sensors based blood glucose detection are of great significance for the diagnosis and treatment of diabetes because diabetes has aroused wide concern in the world. In this study, bovine serum albumin (BSA) was used to cross-link glucose oxidase (GOD) on a glassy carbon electrode (GCE) modified by a composite of hydroxy fullerene (HFs) and multi-walled carbon nanotubes (MWCNTs) and protected with a glutaraldehyde (GLA)/Nafion (NF) composite membrane to prepare a novel glucose biosensor. The modified materials were analyzed by UV-visible spectroscopy (UV-vis), transmission electron microscopy (TEM), and cyclic voltammetry (CV). The prepared MWCNTs-HFs composite has excellent conductivity, the addition of BSA regulates MWCNTs-HFs hydrophobicity and biocompatibility, and better immobilizes GOD on MWCNTs-HFs. MWCNTs-BSA-HFs plays a synergistic role in the electrochemical response to glucose. The biosensor shows high sensitivity (167 μA·mM^-1·cm^-2), wide calibration range (0.01-3.5 mM), and low detection limit (17 μM). The apparent Michaelis-Menten constant Kmapp is 119 μM. Additionally, the proposed biosensor has good selectivity and excellent storage stability (120 days). The practicability of the biosensor was evaluated in real plasma samples, and the recovery rate was satisfactory.

Semiconductor/Carbon Quantum Dot-based Hue Recognition Strategy for Point of Need Testing: A Review

The requirement to establish novel methods for visual detection is attracting attention in many application fields of analytical chemistry, such as, healthcare, environment, agriculture, and food. The research around subjects like "point-of-need", "hue recognition", "paper-based sensor", "fluorescent sensor", etc. has been always aimed at the opportunity to manufacture convenient and fast-response devices to be used by non-specialists. It is possible to achieve economic rationality and technical simplicity for optical sensing toward target analytes through introduction of fluorescent semiconductor/carbon quantum dot (QD) and paper-based substrates. In this Review, the mechanisms of anthropic visual recognition and fluorescent visual assays, characteristics of semiconductor/carbon QDs and ratiometric fluorescence test paper, and strategies of semiconductor/carbon QD-based hue recognition are described. We cover latest progress in the development and application of point-of-need sensors for visual detection, which is based on a semiconductor/carbon quantum dot-based hue recognition strategy generated by ratiometric fluorescence technology.

Difunctional Hydrogel Optical Fiber Fluorescence Sensor for Continuous and Simultaneous Monitoring of Glucose and pH

It is significant for people with diabetes to know their body's real-time glucose level, which can guide the diagnosis and treatment. Therefore, it is necessary to research continuous glucose monitoring (CGM) as it gives us real-time information about our health condition and its dynamic changes. Here, we report a novel hydrogel optical fiber fluorescence sensor segmentally functionalized with fluorescein derivative and CdTe QDs/3-APBA, which can continuously monitor pH and glucose simultaneously. In the glucose detection section, the complexation of PBA and glucose will expand the local hydrogel and decrease the fluorescence of the quantum dots. The fluorescence can be transmitted to the detector by the hydrogel optical fiber in real time. As the complexation reaction and the swelling-deswelling of the hydrogel are all reversible, the dynamic change of glucose concentration can be monitored. For pH detection, the fluorescein attached to another segment of the hydrogel exhibits different protolytic forms when pH changes and the fluorescence changes correspondingly. The significance of pH detection is compensation for pH errors in glucose detection because the reaction between PBA and glucose is sensitive to pH. The emission peaks of the two detection units are 517 nm and 594 nm, respectively, so there is no signal interference between them. The sensor can continuously monitor glucose in 0-20 mM and pH in 5.4-7.8. The advantages of this sensor are multi-parameter simultaneous detection, transmission-detection integration, real-time dynamic detection, and good biocompatibility.

Quantitative detection of captopril in urine by smartphone-assisted ratiometric fluorescence sensing platform

Captopril (CP) is a widely used antihypertensive drug. In this study, a smartphone-assisted sensing platform on the basis of ratiometric fluorescent test strips was developed, which can accomplish visualization for the quantitative detection of captopril. Ratiometric fluorescent probe was constructed from carbon dots (CDs) and gold nanoclusters (Au NCs). After adding Cu²⁺ to fluorescent probe, Cu²⁺ can complex the amino and carboxyl groups on the surface of Au NCs and aggregate Au NCs, which will quench the fluorescence of Au NCs. Compared with amino and carboxyl groups, -SH in CP has a higher affinity for Cu²⁺ and can capture Cu²⁺ to restore Au NCs fluorescence. In this process, CDs remained essentially unchanged as background fluorescence. As CP concentration increased, the fluorescence color showed a distinct change from blue to purple to orange. Based on this principle, a sensing platform combining smartphone and fluorescent test strips was constructed to visualize the quantitative detection of CP by RGB values. Under optimal conditions, the wide linear range of CP detection for both fluorescence spectrometer and smartphone paper-based sensing platform was 0.25-50 μM. The limits of detection were as low as 76 nM and 101.3 nM, respectively. Furthermore, it was implemented successfully for the detection of CP in urine. The satisfactory recoveries were 96.0-103.3% and 92.0-108.0% for fluorescence spectrometer and smartphone platform, respectively. This smartphone-assisted platform provided a new approach for visual detection of CP, which showed its great potential in bioanalytical assays.

Handmade Paper as a Paper Analytical Device for Determining the Quality of an Antidiabetic Drug

Paper analytical devices (PADs) are a class of low-cost, portable, and easy-to-use platform for several analytical tests in clinical diagnostics, environmental pollution monitoring, and food and drug safety screening. These devices are primarily made from cellulosic paper. Considering the importance of eco-friendly and local or distributed manufacturing of devices realized during the COVID-19 pandemic, we systematically studied the potential of handmade Nepali paper to be used in fabricating PADs in this work. We characterized five different handmade papers made from locally available plant fibers using an eco-friendly method and used them to fabricate PADs for determining the drug quality. The thickness, grammage, and apparent density of the paper samples ranged from 198.6 to 314.8 μm, 49.1 to 117.8 g/m2, and 0.23 to 0.43 g/cm3, respectively. The moisture content, water filtration, and wicking speed ranged from 5.8 to 7.1%, 35.7 to 156.7, and 0.062 to 0.124 mms-1, respectively. Furthermore, the water contact angle and porosity ranged from 76.6 to 112.1° and 79 to 83%, respectively. The best paper sample (P5) was chosen to fabricate PADs for the determination of metformin, an antidiabetic drug. The metformin assay on PADs followed a linear range from 0.0625 to 0.5 mg/mL. The assay had a limit of detection and limit of quantitation of 0.05 and 0.18 mg/mL, respectively. The average amount of metformin concentration in samples collected from local pharmacies (n = 20) was 465.6 ± 15.1 mg/tablet. When compared with the spectrophotometric method, PAD assay correctly predicted the concentration of 90% samples. The PAD assay on handmade paper may provide a low-cost and easy-to-use system for screening the quality of drugs and other point-of-need applications.

Detection of glucose in diabetic tears by using gold nanoparticles and MXene composite surface-enhanced Raman scattering substrates

Diabetes has become one of the three chronic non-communicable diseases threatening human health in the world, and the detection of glucose concentration is of great importance for the prevention and treatment of diabetes. The noninvasive detection of glucose in tears has attracted interest over the past several decades, however, time-consuming, expensive equipment, and specialist technicians make tear analysis still challenging. Here, flexible surface-enhanced Raman scattering (SERS) substrates composed of gold nanoparticles (AuNPs) and two-dimensional MXene Ti₃C₂T_X nanosheets have been designed. The GMXeP (gold nanoparticles with MXene nanosheets loaded on paper) SERS substrates show good sensitivity, reproducibility, and stability, yielding an enhancement factor (EF) of 3.7 × 10⁵ at the concentration of 10^-9 M. The GMXeP SERS substrates are used to detect glucose of diabetic tears within a linear range of 1-50 μM, the lowest detection concentration is 0.39 μM and the significant correlation between tear glucose and blood glucose indicates that this method is suitable for sensitive and noninvasive detection of blood glucose.

Upconversion nanoparticles/carbon dots (UCNPs@CDs) composite for simultaneous detection and speciation of divalent and trivalent iron ions

In this study, the application of carbon dots (CDs) modified NaYF₄:Yb, Er nanoparticles (UCNPs@CDs) as the fluorescent nanoprobe for simultaneous detection of Fe²⁺ and Fe³⁺ was investigated. Fe³⁺ quantification (5-80 μmol L^-1) was achieved, as a result of Fe³⁺ induced fluorescence quenching of UCNPs@CDs at 434 nm (under the 336 nm excitation). The chelate (Fe²⁺-phen) formed by Fe²⁺ and 1,10-phenanthroline had a broad absorption centered at 510 nm, due to inner filter effect (IFE), Fe²⁺ quantification (4-120 μmol L^-1) was achieved as a result of (Fe²⁺-phen) induced fluorescence quenching of UCNPs@CDs at 545 nm (under the 980 nm excitation). The resultant UCNPs@CDs probe, with excellent anti-interference capability, favorable fluorescence stability, and convincing performance in real sample analysis, showed promising application in simultaneous detection of Fe²⁺ and Fe³⁺.

Ratiometric fluorescence sensor based on europium-grafted ZnO quantum dots for visual and colorimetric detection of tetracycline

An europium functionalized ZnO quantum dots (QDs) ratiometric fluorescent nanoprobe is designed to establish a real time, on-site visual, and highly sensitive probe method for tetracycline (TC). The yellow-emitting ZnO QDs serves as the internal reference, while the Eu³⁺ chelated on the surface of ZnO QDs is used as the signal reporting unit. This nanoprobe exhibits rapid response, excellent selectivity, and high sensitivity with a detection limit of 4 nM in detecting the levels of TC. In addition, fluorescence of the nanoprobe can change from yellow to red as the concentration of TC increases. Thus, naked eye detection of TC was realized using the test paper processed by nanoprobe, followed by RGB value analysis function on the mobile phone APP.

An ink-jet printed dual-CD ratiometric fluorescent paper-based sensor for the visual detection of Cu2

Copper ion (Cu²⁺) plays an important role in the human body because it is beneficial for metabolism. However, an excessive or slight amount of Cu²⁺ can cause various symptoms. Therefore, it is necessary for human health to realize the trace and visual detection of Cu²⁺. Referring to traditional fluorescence test papers, the qualitative and semi-quantitative detection of Cu²⁺ could be realized by a dual-carbon dots (CDs) ratiometric fluorescent paper-based sensor with the advantages of environmental protection, portability and low cost. In this paper, the inkjet-printed test paper with the best mixing ratio of the two CDs has been researched to maximize the spectral energy transfer of ion detection (maximum color gamut expansion). Among them, the preparation method of b-CDs has been improved, increasing the photoluminescence quantum yield (PLQY) to 88.9%. The sensitivity detection limit of the double emission ratio sensor was 0.15 nM in solution, and the human eye can distinguish at least 3 μmol L⁻¹ Cu²⁺ in the paper-based sensor. Compared with the traditional single-emission sensor, the human eye was more sensitive to the color change of the emission ratio sensor. The results indicate that we not only realized the micro detection of Cu²⁺ with convenient methods, but also provided a promising strategy for the visual detection of Cu²⁺.

A fluorescent test paper sensor for qualitative and semi-quantitative detection of Cu²⁺ is designed based on high photoluminescence quantum yield (PLQY) carbon dots (CDs).

Alloyed AuPt nanoframes loaded on h-BN nanosheets as an ingenious ultrasensitive near-infrared photoelectrochemical biosensor for accurate monitoring glucose in human tears

Photo-electro-chemical (PEC) glucose biosensor has recently attracted extensive attention due to the double advantages of both photocatalysis via photon energy utilization and electrocatalytic oxidation through extra electric field. Compared with previous shorter wavelength (violet-visible) light-induced PEC reaction, the anticipated near infrared (NIR, >~700 nm) excited PEC biosensor with multiple fascinating features should be more suitable for clinical diagnostic biology. Herein, we report an ingenious NIR-PEC biosensor by loading alloyed Au₅Pt₉ nanoframes on two dimensional (2D) hexagonal boron nitride (h-BN) nanosheets. The obtained h-BN/Au₅Pt₉ nanoframes exhibit a remarkable higher NIR-PEC activity in comparison with other as-prepared h-BN/AuPt references. The improved PEC performance is attributed to the enhanced synergetic coupling effect between Au₅Pt₉ nanoalloys and constitutionally stable h-BN that gives rise to a stronger absorbance capacity and pronounced localized surface plasmon resonance (LSPR) in visible-NIR region as well as high free-electron mobility of framework-like Au/Pt. Interestingly, the obtained h-BN/Au₅Pt₉ nanoframes excited by 808 nm NIR light provide superior PEC accuracy and sensitivity as compared to visible or other NIR light irradiation. Then, the novel 808 nm NIR-PEC biosensor was used for precise glucose monitoring in human tears with a detectable concentration of 0.03~100 μM and a low detection limit of 0.406 nM. Undoubtedly, the proposed h-BN/Au₅Pt₉ nanoframes as an appealing NIR-PEC glucose biosensor can possess greater potential values for practical glucose monitoring in biomedicine.

Band-pass filter-assisted ratiometric fluorescent nanoprobe composed of N-(2-aminoethyl-1,8-naphthalimide)-functionalized gold nanoclusters for the determination of alkaline phosphatase using digital image analysis

A smartphone-based dual-wavelength digital imaging platform containing red (539-695 nm) and blue (389-511 nm) band-pass filters was developed for point-of-care (POC) testing of alkaline phosphatase (ALP) activity. The platform was based on dual-emitting fluorescent nanohybrids (AuNC@NAN), the ratiometric probe, which had a fluorescence "on-off-on-off" response. The probe comprised red-emitting gold nanoclusters (AuNCs) acting as the signal report units and blue-emitting N-(2-aminoethyl-1,8-naphthalimide) (NAN) acting as an internal reference. The different responses of the ratiometric probes resulted in a continuous color-multiplexing change from pink-red to dark-purple upon exposure to ALP. The dual-wavelength digital imaging platform was employed to acquire images of AuNC or NAN fluorescence signals without the influence of background light. Unlike the classical one-time digital imaging mode, the accurate red (R) and blue (B) channel values of the generated images can help to directly judge or eliminate the disturbance from unavoidable interfering factors. The R/B values were successfully employed for determining the ALP activity at a range 2.0 to 35.0 mU·mL^-1 with the detection limit of 1.04 mU·mL^-1. Such sensing imaging platform is also successful in determining ALP activity in human serum with 94.9-105% recoveries and relative standard deviation in the range 4.2-5.6%. A novel dual-wavelength smartphone-based digital imaging platform was proposed for simultaneous readout of the reporting and internal reference signals from dual-emitting ratiometric fluorescence probes, which allowed us to the accurate, reliable, and highly sensitive assay of ALP activity in complex samples.

Optical glucose biosensor built-in disposable strips and wearable electronic devices

On-demand screening, real-time monitoring and rapid diagnosis of ubiquitous diseases, such as diabetes, at early stages are indispensable in personalised treatment. Emerging impacts of nano/microscale materials on optical and portable biosensor strips and devices have become increasingly important in the remarkable development of sensitive visualisation (i.e. visible inspection by the human eye) assays, low-cost analyses and personalised home testing of patients with diabetes. With the increasing public attention regarding the self-monitoring of diabetes, the development of visual readout, easy-to-use and wearable biosensors has gained considerable interest. Our comprehensive review bridges the practical assessment gap between optical bio-visualisation assays, disposable test strips, sensor array designs and full integration into flexible skin-based or contact lens devices with the on-site wireless signal transmission of glucose detection in physiological fluids. To date, the fully modulated integration of nano/microscale optical biosensors into wearable electronic devices, such as smartphones, is critical to prolong periods of indoor and outdoor clinical diagnostics. Focus should be given to the improvements of invasive, wireless and portable sensing technologies to improve the applicability and reliability of screen display, continuous monitoring, dynamic data visualisation, online acquisition and self and in-home healthcare management of patients with diabetes.

On-demand mixing and dispersion in mini-pillar based microdroplets

The analysis and detection of ultra-trace biomarkers are often carried out in microliter droplets. Common stirring approaches have some difficulties in precise and contactless mixing and dispersion in microdroplets. In this work, an open mini-pillar-based platform that integrates with ultrasound units is developed to achieve contactless mixing and dispersion in microliter samples. On such a platform, mini-pillars can anchor microdroplets as individual microreactors, and each ultrasound unit can be remotely controlled to achieve on-demand contactless micro-stirring, which is also confirmed by mixing and dispersing of Fe3O4 nanoparticles (1 μm) in microdroplets (10 μL). Such on-demand high-throughput mixing and dispersion that integrates ultrasound mixing with microdroplet technology provides a potential robot-based platform for achieving high-throughput and ultra-trace biosensing in microliter droplets.

Boric-acid-modified Fe3O4@PDA@UiO-66 for enrichment and detection of glucose by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry

Herein, boric-acid-modified multifunctional Zr-based metal-organic frameworks (denoted as Fe₃O₄@PDA@B-UiO-66) were synthesized by hydrothermal reaction and surface modification. Compared to traditional matrix, Fe₃O₄@PDA@B-UiO-66 has the advantages of high ionization efficiency, high surface area, low matrix background, porous structure, and numerous boric-acid-active sites. By combining matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF MS), Fe₃O₄@PDA@B-UiO-66 was used as an adsorbent and matrix for enrichment and detection of glucose, based on a specific reaction between boric acid and glucose. The limit of detection was 58.5 nM. The proposed method provides a simple and efficient approach for the sensitive and quantitative detection of glucose in complex samples based on MALDI-TOF MS. Design and synthesis of boric-acid-modified multifunctional magnetic metal-organic frameworks (designated as Fe₃O₄@PDA@B-UiO-66) applied as adsorbent and matrix for the matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF MS) analysis of glucose in complex biosamples.

A turn-on fluorescent sensor based on carbon dots from Sophora japonica leaves for the detection of glyphosate

Carbon dots (CDs) having low cost and low toxicity and synthesized via a green route were applied to establish a fluorescent nanoprobe for the measurement of glyphosate. The synthesis was realized via a one-pot hydrothermal procedure using Sophora japonica leaves as the carbon source. It was found that electron transfer occurred between Fe3+ and the as-prepared CDs. Therefore, Fe3+ exhibited a specific dynamic-quenching toward CDs. However, the electron transfer process was inhibited by glyphosate. The fluorescence of the quenched CDs/Fe3+ system was recovered by the addition of glyphosate. It resulted from the strong complexation between Fe3+ and the functional groups (like -PO3H2 and -COOH) in the glyphosate molecule. These functional groups captured Fe3+ from the CD/Fe3+ system to reduce the electron transfer. With such a design, the rapid detection of glyphosate could be realized by this turn-on fluorescent sensor based on the CD/Fe3+ system. Under optimal conditions, the CD/Fe3+ system showed a concentration-dependent fluorescent response toward glyphosate in the linear range from 0.1 to 16 ppm. The limit of detection was calculated to be as low as 8.75 ppb (3σ/S). In addition, the successful detection of glyphosate in real samples with satisfactory recoveries exhibited a practical application of the CD/Fe3+ nanoprobe in food safety and environmental monitoring.

A capillary-based fluorimetric platform for the evaluation of glucose in blood using gold nanoclusters and glucose oxidase in the ZIF-8 matrix

A capillary-based fluorimetric analysis method was developed for probing glucose (Glu) in blood using Glu oxidase-anchored gold nanoclusters (GOD-AuNCs) and the ZIF-8 matrix. AuNCs were attached with GOD to be further encapsulated into the ZIF-8 matrix through the protein-mediated formation route. The resulting GOD-AuNCs@ZIF-8 nanocomposites could present the AuNC-improved catalysis of GOD and ZIF-8-improved environmental stability. The ZIF-8-enhanced fluorescence intensity of AuNCs could also be expected. Moreover, a capillary-based fluorometric platform was constructed for sensing Glu by coating the capillaries first with GOD-AuNCs and then the ZIF-8 matrix. Herein, Glu was introduced through the self-driven sampling to trigger the GOD-catalyzed production of hydrogen peroxide, which could induce the fluorescence quenching rationally depending on the Glu concentrations. The developed fluorimetric method could allow for the rapid and simple detection of Glu with the concentrations linearly ranging from 5.0 μM to 2.5 mM. Besides, the feasibility of practical applications was demonstrated by the evaluation of Glu in blood showing the recoveries of 96.2%-103.4%. Importantly, the proposed design of the capillary-based fluorimetric platform by the synergetic combination of catalysis-specific recognition and fluorescence signaling may open a new door toward extensive applications in the biological sensing, catalysis, and imaging fields.

Embedding dual fluoroprobe in metal-organic frameworks for continuous visual recognition of Pb2+ and PO43- via fluorescence 'turn-off-on' response: Agar test paper and fingerprint

A novel dual-emissive ratiometric fluorescence (RF) probe CDs/QDs@ZIF-8 has been successfully constructed by employing a simple and effective strategy for in situ encapsulating carbon dots (CDs) and thioglycolic acid-modified CdTe quantum dots (QDs) into porous metal-organic frameworks (MOFs) "cage". The dual responsive colorimetric fluorescence probe was developed for the ultra-high selectivity and sensitivity continuous detection of Pb²⁺ (turn OFF) and PO₄^3- (turn ON) in biological samples. Blue CDs acts as a stable internal standard emission, the emission color of CDs/QDs@ZIF-8 changes from red to blue with introducing Pb²⁺, fluorescence of probe is quenched because of the binding of Pb²⁺ ions to thioglycolic acid on the surface of probe and e- transfer from the photoexcited QDs to Pb²⁺ ions, color can be recovered after the adding PO₄^3- to CDs/QDs@ZIF-8-Pb²⁺ system, which could take away Pb²⁺ ions from the surface of CDs/QDs@ZIF-8. More importantly, fabricated agar test papers was also successfully applied in visual detection of Pb²⁺ and PO₄³- in real samples, which can implement without instrument-specific calibration.

A Cell-Phone-Based Acoustofluidic Platform for Quantitative Point-of-Care Testing

Acoustofluidic methods, with advantages including simplicity of device design, biocompatible manipulation, and low power consumption, have been touted as promising tools for point-of-care (POC) testing. Here, we report a cell-phone-based acoustofluidic platform that uses acoustic radiation forces to enrich nanoscale analytes and red and green fluorescence nanoparticles (SiO₂@R and G@SiO₂) as probes for POC visual testing. Thus, the color signals from the fluorescent probes are enhanced, and colorimetric sensitivity is significantly improved. As a POC demonstration, the acoustofluidic platform is used to detect hemoglobin (Hb) from human blood, resulting in a rapid and straightforward measurement of normal blood Hb levels. Combining an acoustofluidic-based nanoparticle-concentration platform with cell-phone-based colorimetry, our method introduces a potential pathway toward practical POC testing.

Controllable and robust dual-emissive quantum dot nanohybrids as inner filter-based ratiometric probes for visualizable melamine detection

The ratiometric fluorescence technique is of great interest due to its visualization characteristics. The construction of a reliable fluorescent ratiometric nanoprobe for high-sensitivity visual quantification is highly sought after but it is limited by poor stability and controllability. Herein, we report a robust dual-emissive quantum dot nanohybrid with precise color tunability and demonstrate its potential as a two-signal-change ratiometric probe for visual detection. A novel assembly strategy was developed for spatially implanting hydrophobic green and red quantum dots (QDs) into a silica scaffold to form a dual-emissive hierarchical fluorescent silica nanohybrid. The fluorescence intensity ratio and color of the nanohybrid were precisely tailored by altering the amounts of green and red QDs. Particularly, after the alkylsilane-mediated phase transfer and exterior silica shell growth, the nanohybrid exhibited the well-preserved fluorescence features of the original QDs and robust optical/colloid stability. An inner filter-based ratiometric nanoprobe for the visual determination of melamine was ultimately devised by combining the spectra-overlapped two-colored fluorescent nanohybrid with analyte-specific gold nanoparticles. Furthermore, based on the reversible fluorescence signal changes in two-colored QDs induced by melamine, a logic gate strategy for melamine monitoring was constructed. The newly developed fluorescent ratiometric nanoprobe shows great prospects for the visual and quantitative determination of analytes in a complex biological matrix.

Fluorescent nanosensor designing via hybrid of carbon dots and post-imprinted polymers for the detection of ovalbumin

We reported a facile strategy to assemble a ratiometric nanosensor for the ovalbumin (OVA) fluorescence determination and meanwhile it can be utilized for selective visual identification by naked eyes with fluorescent test papers under 365 nm UV lamp. The nanosensor was prepared through simply mixing blue color carbon dots (CDs) and green color core-shell imprinted polymers. Blue CDs were used directly as the internal reference without participating in the imprinting process and modified molecularly imprinted polymers (MIPs) were synthesized by post-imprinting, using fluorescein isothiocyanate (FITC) as fluorescence enhanced signal. Upon the addition of different concentrations of OVA, the fluorescence intensity of FITC was enhanced, while the fluorescence intensity of CDs was almost unchanged, leading to a detection limit as low as 15.4 nM. Accordingly, the fluorescence color was gradually changed from blue to dark olive green to green with naked eyes observation. Moreover, the ratiometric nanosensor was successfully applied to detect OVA in the human urine samples with satisfactory recoveries attaining of 92.0-104.0% with relative standard deviation (RSD) of 3.3-3.9% and 93.3-101.0% with RSDs of 2.7-3.8% for the spiked chicken egg white samples. This strategy reported here opens a novel pathway for biomacromolecule detection in real applications and can realize the visual observation on fluorescent test papers.

DNA-scaffold copper nanoclusters integrated into a cerium(III)-triggered Fenton-like reaction for the fluorometric and colorimetric enzymatic determination of glucose

A fluorometric and colorimetric method are described for the determination of hydrogen peroxide and glucose by integrating copper nanoclusters (CuNCs) into a Fenton-like reaction. The mechanism mainly depends on the fast formation of long-strand DNA-templated CuNCs with strong red fluorescence (with excitation/emission maxima at 340/640 nm) in the absence of H₂O₂. The DNA can be cleaved into short-oligonucleotide fragments by hydroxy radicals as formed in the Ce(III)-triggered Fenton-like reaction in the presence of H₂O₂. As a result, short-strand DNA loses the ability as a template for the formation of CuNCs. This leads to a decrease of fluorescence. The colorimetric assay, in turn, is based on the oxidation of colorless Ce(III) ions to the distinctly yellow Ce(IV) ions (with an absorption maximum at 400 nm) by H₂O₂. Compared with those assays based on the use of enzyme mimics, this method does not require any chromogenic substrates such as ABTS and TMB. Based on the dual-signal readout platform, we successfully achieved the detection of H₂O₂ and glucose. LODs are as low as 0.266 μM and 2.92 μM. The methods were applied to the sensitive determination of glucose by using glucose oxidase (GOx) which catalyzes the oxidization of glucose to produce H₂O₂. The practical application was demonstrated by determination of glucose in human serum, with apparent recoveries of 98.4-101.9% and 99.1-105.6%, respectively. The concentration of glucose ranges from 1 to 500 μM and 50 to 600 μM based on the dual-signal readout platform, respectively. This fluorometric and colorimetric dual-mode strategy will pave a new avenue for constructing effective assays for H₂O₂-related analytes in biochemical and clinical applications. Graphical abstractSchematic representation of a fluorometric and colorimetric dual-readout strategy for the sensitive determination of hydrogen peroxide and glucose. The assay has been designed by integrating copper nanoclusters into a Ce(III)-triggered Fenton-like reaction.

A split aptamer-labeled ratiometric fluorescent biosensor for specific detection of adenosine in human urine

A dual-emission ratiometric fluorometric aptasensor is presented for highly specific detection of adenosine. An adenosine binding aptamer (ABA) was split into two halves (termed as ABA1 and ABA2). ABA1 was covalently bound to blue-emitting carbon dots (with excitation/emission maxima at 365/440 nm) as responsive fluorophore (referred to as ABA1-CDs). ABA2 was linked to red-emitting silica-coated CdTe quantum dots (with excitation/emission maxima at 365/613 nm) acting as internal reference and referred to as ABA2-QDs@SiO₂. Upon addition of graphene oxide, the fluorescence of ABA1-CDs is quenched. After subsequent addition of ABA2-QDs@SiO₂ and different amounts of adenosine, the blue fluorescence is recovered and causes a color change from red to royal blue. The method represents a ratiometric turn-on assay for visual, colorimetric and fluorometric determination of adenosine. The limit of detection is as low as 2.4 nM in case of ratiometric fluorometry. The method was successfully applied to the determination of adenosine in (spiked) human urine. Recoveries range from 98.8% to 102%. Graphical abstract Adenosine binding aptamer1-carbon dots (ABA1-CDs) can absorb on graphene oxide (GO) via π stacking. This causes fluorescence to be quenched by fluorescence resonance energy transfer (FRET). After addition of ABA2-silica-coated quantum dots (ABA2-QDs@SiO₂) and adenosine, binding of adenosine to two pieces of aptamers forms a complex (ABA1-CD/adenosine/ABA2-QD@SiO₂) which dissociates from GO. As a result, fluorescence is recovered.

Ratiometric fluorescent test paper based on silicon nanocrystals and carbon dots for sensitive determination of mercuric ions

Classical dye absorption-based pH test papers are widely used to measure the degree of acidity of media for quantification or semi-quantification by the observation of the naked eye on the variation of colour. However, it remains a challenging task to extend portable and cheap methods to a wide range of analytes for accurate quantification. Here, we report a dosage-sensitive test paper for the assay of mercury ions (Hg2+) with wide colour evolution. The ratiometric fluorescent probe was prepared by mixing blue-emission silicon nanocrystals (Si NCs) and red-emission carbon dots (r-CDs). The Si NCs serve as the reaction site and the r-CDs as the internal reference. Upon the addition of Hg2+, the blue fluorescence of the Si NCs was quenched, while the red fluorescence of the r-CDs remained constant, resulting in the consecutive fluorescence colour changes from blue to orange red. The probe demonstrates high selectivity and sensitivity of the visualization assay of Hg2+ with a detection limit of 7.63 nM. Moreover, we printed the ratiometric fluorescence probe result onto a piece of filter paper to prepare a test paper, which represents an on-site, sensitive, rapid and cost-effective method for the visual determination of Hg2+ by the naked eye.

A nanopaper-based artificial tongue: a ratiometric fluorescent sensor array on bacterial nanocellulose for chemical discrimination applications

In the present study, a ratiometric fluorescent sensor array as an artificial tongue has been developed on a nanopaper platform for chemical discrimination applications. The bacterial cellulose (BC) nanopaper was utilized for the first time as a novel, flexible, and transparent substrate in the optical sensor arrays for developing high-performance artificial tongues. To fabricate this platform, the hydrophobic walls on the BC nanopaper substrates were successfully created using a laser printing technology. In addition, we have used the interesting photoluminescence (PL) properties of an immobilized ratiometric probe (carbon dot-Rhodamine B (CD-RhB) nanohybrids) on the nanopaper platform to improve the visual discrimination analysis. Heavy metal ions were utilized as model analytes to verify the applicability of the fabricated nanopaper-based ratiometric fluorescent sensor array (NRFSA). Using the color variation of the NRFSA platform upon the addition of heavy metal ions, which have been obtained by a smartphone (under an UV irradiation), five heavy metal ions (i.e., Hg(ii), Pb(ii), Cd(ii), Fe(iii), and Cu(ii)) have been well-distinguished through the RGB analysis via production of the characteristic PL fingerprint-like response patterns for each of them. Moreover, the developed optical sensor array was successfully exploited to identify the heavy metal ions in the water and fish samples. We have also found that the PL spectra, which have been obtained by a spectrofluorometer, of the developed NRFSA can be exploited for discrimination applications. We believe that the nanopaper-based artificial tongues will provide innovative insights into the development of optical sensor arrays towards advanced (bio)chemical discrimination applications and can revolutionize the conventional optical sensor array technology.

A novel paper-based colorimetry device for the determination of the albumin to creatinine ratio

A novel paper-based analytical device (PAD) was fabricated and developed for the simple and rapid determination of the albumin to creatinine ratio (ACR) in urine samples.

A ratiometric fluorescent paper sensor for consecutive color change-based visual determination of blood glucose in serum

The ratiometric fluorescent paper sensor with a dosage-sensitive allochromatic capability for the visual determination of blood glucose in human serum.

A fluorometric and colorimetric dual-mode sensor based on nitrogen and iron co-doped graphene quantum dots for detection of ferric ions in biological fluids and cellular imaging

A dual-mode sensing strategy based on N, Fe-GQDs for effective and selective detecting of Fe³⁺ and cellular imaging was developed.

A rainbow ratiometric fluorescent sensor array on bacterial nanocellulose for visual discrimination of biothiols

The crucial role of biothiols in many biological processes, which turns them into important biomarkers for the early diagnosis of various diseases, the development of an affordable, sensitive and portable probe for the detection and discrimination of these compounds is of great importance.

Profuse color-evolution-based fluorescent test paper sensor for rapid and visual monitoring of endogenous Cu2+ in human urine

The fluorescent paper for colorimetric detection of metal ions has been widely fabricated using various sensing probes, but it still remains an elusive task to design a test paper with multicolor variation with target dosages for accurate determination. Herein, we report a profuse color-evolution-based fluorescent test paper sensor for rapid and visual monitoring of Cu²⁺ in human urine by printing tricolor probe onto filter paper. The tricolor probe consists of blue-emission carbon dots (bCDs), green-emission quantum dots (gQDs) and red-emission quantum dots (rQDs), which is based on the principle that the fluorescence of gQDs and rQDs are simultaneously quenched by Cu²⁺, whereas the bCDs as the photostable internal standard is insensitive to Cu²⁺. Upon the addition of different amounts of Cu²⁺, the ratiometric fluorescence intensity of the tricolor probe continuously varied, leading to color changes from shallow pink to blue with a detection limit of 1.3nM. When the tricolor probe solution was printed onto a sheet of filter paper, as-obtained test paper displayed a more profuse color evolution from shallow pink to light salmon to dark orange to olive drab to dark olive green to slate blue to royal blue and to final dark blue with the increase of Cu²⁺ concentration compared with dual-color probe-based test paper, and dosage scale as low as 6.0nM was clearly discriminated. The sensing test paper is simple, rapid and inexpensive, and serves as a visual platform for ultrasensitive monitoring of endogenous Cu²⁺ in human urine.

Dual-Colored Carbon Dot Ratiometric Fluorescent Test Paper Based on a Specific Spectral Energy Transfer for Semiquantitative Assay of Copper Ions

Classical pH test papers are widely used to measure the acid-base degree of media in a qualitative or semiquantitative manner. However, the extension of portable and inexpensive methods to a wide range of analytes so as to eliminate the tediousness of instrumental assays remains unsuccessful. Here, we report a novel kind of dual-colored carbon dot (CD) ratiometric fluorescent test paper for the semiquantitative assay of copper ions (Cu²⁺) by a dose-sensitive color evolution. The preparation of the test paper is based on the following two interesting findings: on the one hand, residual p-phenylenediamine at the surface of as-synthesized red CDs (r-CDs) efficiently binds Cu²⁺ ions to produce a strong visible absorption that overlaps the emission of blue CDs (b-CDs); on the other hand, the Cu²⁺ ions render the adsorption of small b-CDs onto the surface of larger r-CDs through their dual-coordinating interactions with the surface ligands of both r-CDs and b-CDs. These two mechanisms lead to a specific spectral energy transfer to quench the fluorescence of b-CDs with a sensitive detection limit of 8.82 nM Cu²⁺, whereas the red fluorescence of r-CDs is unaffected as a stable internal standard. Ratiometric fluorescent test papers have been prepared using a mixture of r-CDs and b-CDs (1:7) as ink by jetprinting on a piece of paper. With the addition of Cu²⁺ ions, the blue test paper produces a consecutive wide-colored evolution from blue to orange-red, with a dose-discerning ability as low as 25 nM.