A superstructure-based electrochemical assay for signal-amplified detection of DNA methyltransferase activity

Self-assembly of a AuNPs/Ti3C2 MXene hydrogel for cascade amplification of microRNA-122 biosensing

A three-dimensional (3D) self-assembled AuNPs/Ti3C2 MXene hydrogel (AuNPs/Ti3C2 MXH) nanocomposite was prepared for the fabrication of a novel microRNA-122 electrochemical biosensor. The 3D hydrogel structure was gelated from two-dimensional MXene nanosheets with the assistance of graphite oxide and ethylenediamine. MXene hydrogels supported the in situ formation of Au nanoparticles (AuNPs) that predominantly exploring the (111) facet, and these AuNPs are utilized as carriers for hairpin DNA (hpDNA) probes, facilitating DNA hybridization. MXene acted as both a reductant and stabilizer, significantly improving the electrochemical signal. In addition, the conjugation of PAMAM dendrimer-encapsulated AuNPs and H-DNA worked as an ideal bridge to connect targets and efficient electrochemical tags, providing a high amplification efficiency for the sensing of microRNA-122. A linear relationship between the peak currents and the logarithm of the concentrations of microRNA-122 from 1.0 × 10-2 to 1.0 × 102 fM (I = 1.642 + 0.312 lgc, R2 = 0.9891), is obtained. The detection limit is  0.8 × 10-2 fM (S/N = 3). The average recovery for human serum detection ranged from 97.32 to 101.4% (RSD < 5%).

Fluorogenic RNA Aptamer-Based Amplification and Transcription Strategy for Label-free Sensing of Methyltransferase Activity in Complex Matrixes

DNA methyltransferase is significant in cellular activities and gene expression, and its aberrant expression is closely linked to various cancers during initiation and progression. Currently, there is a great demand for reliable and label-free techniques for DNA methyltransferase evaluation in tumor diagnosis and cancer therapy. Herein, a low-background fluorescent RNA aptamer-based sensing approach for label-free quantification of cytosine-guanine (CpG) dinucleotides methyltransferase (M.SssI) is reported. The fluorogenic light-up RNA aptamers-based strategy exhibits high selectivity via restriction endonuclease, padlock-based recognition, and RNA transcription. By combining rolling circle amplification (RCA), and RNA transcription with fluorescence response of RNA aptamers of Spinach-dye compound, the proposed platform exhibited efficiently ultrahigh sensitivity toward M.SssI. Eventually, the detection can be achieved in a linear range of 0.02-100 U mL-1 with a detection limit of 1.6 × 10-3 U mL-1. Owing to these superior features, the method is further applied in serum samples spiked M.SssI, which delivers a recovery ranging from 92.0 to 107.0% and a relative standard deviation <7.0%, providing a promising and practical tool for determining M.SssI in complex biological matrices.

A programmable DNA nanodevice for colorimetric detection of DNA methyltransferase activity using functionalized hemin/G-quadruplex DNAzyme

The measurement of DNA methyltransferase (MTase) activity and screening of DNA MTase inhibitors holds significant importance for the diagnosis and therapy of methylation-related illness. Herein, we developed a colorimetric biosensor (PER-FHGD nanodevice) to detect DNA MTase activity by integrating the primer exchange reaction (PER) amplification and functionalized hemin/G-quadruplex DNAzyme (FHGD). By replacing the native hemin cofactor into the functionalized cofactor mimics, FHGD has exhibited significantly improved catalytic efficiency, thereby enhancing the detection performance of the FHGD-based system. The proposed PER-FHGD system is capable of detecting Dam MTase with excellent sensitivity, exhibiting a limit of detection (LOD) as low as 0.3 U/mL. Additionally, this assay demonstrates remarkable selectivity and ability for Dam MTase inhibitors screening. Furthermore, using this assay, we successfully detect the Dam MTase activity both in serum and in E. coli cell extracts. Importantly, this system has the potential to serve as a universal strategy for FHGD-based diagnosis in point-of-care (POC) tests, by simply altering the recognition sequence of the substrate for other analytes.

In situ growth of TiO2/Ti3C2 MXene Schottky heterojunction as a highly sensitive photoelectrochemical biosensor for DNA detection

In this work, a heterojunction composed of a TiO2 nanosheet and layered Ti3C2 was synthesized by directly growing TiO2 in Ti3C2 MXene. Compared with pure TiO2, TiO2/Ti3C2 composites had increased surface area, and a light absorption range that extended from ultraviolet to visible light, which greatly extended the life of photogenerated carriers. A photoelectrochemical biosensor for DNA detection was constructed based on the TiO2/Ti3C2 heterogeneous structure, which was comprehensively studied based on photocurrent responses. In the absence of the target, the CdSe QDs were close to the surface of the electrode, resulting in enhanced sensitization and increased photocurrent. In the presence of the target, the photocurrent decreases due to the formation of rigid double strands with the probe DNA, which caused the CdSe QDs to be far away from the electrode surface. The sensor had stability and sensitivity for DNA detection in the range of 10 nM-10 fM, and the lower detection limit was 6 fM. Its outstanding characteristics also provided ideas for detecting various other target DNA for early diagnosis of various diseases.

An Isothermal Autocatalytic Hybridization Reaction Circuit for Sensitive Detection of DNA Methyltransferase and Inhibitors Assay

Abnormal DNA methylation contributes to the annoying tumorigenesis and the elevated expression of methylation-related methyltransferase (MTase) is associated with many diseases. Hence DNA MTase could serve as a promising biomarker for cancer-specific diagnosis as well as a potential therapeutic target. Herein, we developed an isothermal autocatalytic hybridization reaction (AHR) circuit for the sensitive detection of MTase and its inhibitors by integrating the catalytic hairpin assembly (CHA) converter with the hybridization chain reaction (HCR) amplifier. The initiator-mediated HCR amplifier could generate amplified fluorescent readout, as well as numerous newly activated triggers for motivating the CHA converter. The CHA converter is designed to expose the identical sequence of HCR initiators that reversely powered the HCR amplifier. Thus, the trace amount of target could produce exponentially amplified fluorescent readout by the autocatalytic feedback cycle between HCR and CHA systems. Then an auxiliary hairpin was introduced to mediate the assay of Dam MTase via the well-established AHR circuit. The Dam MTase-catalyzed methylation of auxiliary hairpin leads to its subsequent efficient cleavage by DpnI endonuclease, thus resulting in the release of HCR initiators to initiate the AHR circuit. The programmable nature of the auxiliary hairpin allows its easy adaption into other MTase assay by simply changing the recognition site. This proposed AHR circuit permits a sensitive, robust, and versatile analysis of MTase with the limit of detection (LOD) of 0.011 U/mL. Lastly, the AHR circuit could be utilized for MTase analysis in real complex samples and for evaluating the cell-cycle-dependent expression of MTase. This developed MTase-sensing strategy holds promising potential for biomedical analysis and clinical diagnosis.

Assay for TET1 activity and its inhibitors screening with signal amplification by both nanoparticles and Ru(III) redox recycling

Ten-eleven translocation protein 1 (TET1) is one member of TET proteins family which plays a key role in dynamic DNA methylation-demethylation process. Herein, a novel biosensor was constructed for TET1 detection and its inhibitors screening utilizing restriction digestion of endonuclease enzyme MspI. Half-methylated oligonucleotide (5mC DNA) was used as target and Ru(NH₃)₆³⁺ as electrochemical signal probe. After the treatment by TET1 and T4 β-glucosyltransferase (T4 β-GT), target oligonucleotide would not be recognized and digested. If there was no TET1, the target would be digested and the response of biosensor decreased greatly. The current difference of biosensor with and without the incubation with TET1 was therefore dependent on the concentration of TET1. To increase sensitivity of the biosensor, nanostructured film at electrode surface and nanoparticles modified oligonucleotides were employed as signal amplification elements for Ru(NH₃)₆³⁺ recycling. Finally, this biosensor showed high performance with a wide linear range of TET1 concentration from 3.5-21 ng/μL and a low detection limit of 0.33 ng/μL, which is superior to other existing methods. The inhibition effects of Bobcat339 on TET1 was successfully proved by our biosensor with an IC₅₀ of 38 μM. Not only that, but the feasibility of the biosensor for inhibitors screening was evaluated and further confirmed by other compounds including two anticancer drugs and three active ingredients of traditional Chinese medicine.

Novel electrochemical biosensor based on Exo III-assisted digestion of dsDNA polymer from hybridization chain reaction in homogeneous solution for CYFRA 21-1 DNA assay

A novel electrochemical biosensing strategy was proposed to detect cytokeratin fragment antigen 21-1 (CYFRA 21-1) DNA based on Exo III-assisted digestion of dsDNA polymer (EADDP) from hybridization chain reaction (HCR). Primarily, the presence of target can drive a catalytic hairpin assembly (CHA) reaction, which was aimed to achieve target recognition and circulation. Then the HCR can be triggered for further signal amplification and generate long dsDNA polymer with signal tags. Subsequently, the introduction of Exo III can digest the long dsDNA polymer to produce large amounts of double signal fragments (DSFs). The above experiments were all carried out in homogeneous solution. Finally, the released DSF can be captured onto the electrode directly by capture probe (CP) and a highly amplified electrochemical signal can be detected. The EADDP in homogeneous solution circumvented complex solid-liquid interface reaction and tedious operation steps on electrode. Besides, one target can be converted into abundant DSFs, which greatly improved the sensitivity. This biosensor exhibited a low detection limit (0.0348 fM) and wide linear range (5 fM ∼ 50 nM) for CYFRA 21-1 DNA biosensing with reliable specificity and stability.

Sensitivity-Improved SERS Detection of Methyltransferase Assisted by Plasmonically Engineered Nanoholes Array and Hybridization Chain Reaction

Detection of methyltransferase (MTase) activity is of great significance in methylation-related disease diagnosis and drug screening. Herein, we present a dual-amplification sensing strategy that is assisted by plasmonically enhanced Raman intensity at engineered nanoholes array, along with signal amplification by the hybridization chain reaction (HCR) for the ultrasensitive detection of M.SssI MTase activity and inhibitor screening. An engineered surface-enhanced Raman scattering (SERS) substrate, namely, a structured nanoholes array (NHA) with wavelength-matched surface plasmon resonance (SPR) at the wavelength of laser excitation (785 nm), was rationally designed through finite-difference time-domain (FDTD) simulations, precisely fabricated through master-assisted replication, and then used as a sensing platform. Uniform and intense SERS signals were achieved by turning on the plasmonic enhancement under the excitation of SPR. Probe DNA was designed to hybridize with target DNA (a BRCA1 gene fragment), and the formed dsDNA with the recognition site of M.SssI was assembled on the NHA. In the presence of M.SssI, the HCR process was triggered upon adding DNAs labeled with the Raman reporter Cy5, leading to an amplified SERS signal of Cy5. The intensity of Cy5 increases with increasing M.SssI activity, which establishes the basis of the assay for M.SssI. The developed assay displays an ultrasensitivity that has a broad linear range (0.002-200 U/mL) and a low detection limit (2 × 10^-4 U/mL), which is superior to that of the reported SERS-based detection methods. Moreover, it can selectively detect M.SssI in human serum samples and evaluate the efficiency of M.SssI inhibitors.

Electrochemical Sensing of Exosomal MicroRNA Based on Hybridization Chain Reaction Signal Amplification with Reduced False-Positive Signals

MicroRNAs (miRNAs) in cancer cell-derived exosomes are important cancer biomarkers. Herein, a sensitive hybridization chain reaction (HCR) electrochemical assay was fabricated for the detection of exosomal microRNA-122 (miR-122). The hairpin DNA (hpDNA) probes were first immobilized on the surface of a gold electrode. In the presence of miR-122, the hairpin structure of the hpDNA could be opened and triggered the HCR through the cross-opening and hybridization of two helper DNA hairpins. Long nicked double helixes generated from HCR are used to capture more RuHex and increase the signal of differential pulse voltammetry (DPV). In this assay, the density of the hpDNA probes on the surface of the gold electrode was precisely controlled by the simultaneous immobilization of hpDNA and short 12 nucleotides single-stranded DNA (S-12), providing a very high amplification efficiency. More importantly, the false positive signal could be reduced or completely eliminated by applying exonuclease I (Exo I) before the introduction of target miR-122. Under optimal conditions, the assay offers very high sensitivity with an attomolar level detection limit, a linear range with 9 orders of magnitude, and specificity in single mismatch discrimination. This sensitive electrochemical assay could successfully evaluate the miR-122 concentration in different cancer-derived exosomes, indicating its potential use in cancer diagnostics.

Sensitive fluorescent detection of methyltransferase based on thermosensitive poly(N-isopropylacrylamide)

DNA methyltransferase (MTase) has a crucial role in many biological processes, its abnormal expression level has been regarded as a predictive cancer biomarker. Herein, a sensitive fluorescence method based on thermosensitive poly (N-isopr-opylacrylamide) was developed to assay of M.SssI activity. When the M.SssI was introduced, dsDNA was methylated at palindromic sequence 5'-C^mCGG-3' and became resistant to cleavage by the endonuclease HpaII. Therefore, a biotin modified ssDNA and a FAM modified ssDNA were designed including the recognized sites for both methyltransferase M.SssI and endonuclease HpaII. By SA-biotin intereaction, the DNA was conjugated to thermosensitive poly (N-isopropylacrylamide) modified by SA, the methylated substrate fluorescence was increased with the concentration of M.SssI increasing. The proposed method has a low detection limit of 0.18 U/mL. This simple method can be a useful tool to apply in diagnosis and biomedical research, which was successfully investigated in the serum sample.

Electrochemical signal-amplified detection of 5-methylcytosine and 5-hydroxymethylcytosine in DNA using glucose modification coupled with restriction endonucleases

A sensitive electrochemical assay based on glucose modification coupled with restriction endonucleases was fabricated for the detection of 5-methylcytosine and 5-hydroxymethylcytosine in DNA.

Dual-signal ratiometric electrochemiluminescence assay for detecting the activity of human methyltransferase

A ratiometric electrochemiluminescence assay using CdS:Eu NCs and luminol as signal emitters was fabricated for detecting the human methyltransferase activity.

Quantification of gene-specific DNA methylation in oesophageal cancer via electrochemistry

Development of simple and inexpensive method for the analysis of gene-specific DNA methylation is important for the diagnosis and prognosis of patients with cancer. Herein, we report a relatively simple and inexpensive electrochemical method for the sensitive and selective detection of gene-specific DNA methylation in oesophageal cancer. The underlying principle of the method relies on the affinity interaction between DNA bases and unmodified gold electrode. Since the affinity trend of DNA bases towards the gold surface follows as adenine (A) > cytosine (C) > guanine (G)> thymine (T), a relatively larger amount of bisulfite-treated adenine-enriched unmethylated DNA adsorbs on the screen-printed gold electrodes (SPE-Au) in comparison to the guanine-enriched methylated sample. The methylation levels were (i.e., different level of surface attached DNA molecules due to the base dependent differential adsorption pattern) quantified by measuring saturated amount of charge-compensating [Ru(NH₃)₆]³⁺ molecules in the surface-attached DNAs by chronocoulometry as redox charge of the [Ru(NH₃)₆]³⁺ molecules quantitatively reflects the amount of the adsorbed DNA confined at the electrode surface. The assay could successfully distinguish methylated and unmethylated DNA sequences at single CpG resolution and as low as 10% differences in DNA methylation. In addition, the assay showed fairly good reproducibility (% RSD= <5%) with better sensitivity and specificity by analysing various levels of methylation in two cell lines and eight fresh tissues samples from patients with oesophageal squamous cell carcinoma. Finally, the method was validated with methylation specific-high resolution melting curve analysis and Sanger sequencing methods.

An electrochemiluminescence assay for sensitive detection of methyltransferase activity in different cancer cells by hybridization chain reaction coupled with a G-quadruplex/hemin DNAzyme biosensing strategy

A sensitive electrochemiluminescence assay coupled HCR with a G-quadruplex/hemin DNAzyme was fabricated for the detection of DNMT1 activity in cancer cells.