A novel method for sensitive microRNA detection: Electropolymerization based doping

Magnetically Assisted Immobilization-Free Detection of microRNAs Based on the Signal Amplification of Duplex-Specific Nuclease

The double specific nuclease (DSN)-based methods for microRNAs (miRNAs) detection usually require the immobilization of DNA probes on a solid surface. However, such strategies have the drawbacks of low hybridization and cleavage efficiency caused by steric hindrance effect and high salt concentration on the solid surface. Herein, we proposed an immobilization-free method for miRNA detection on the basic of DSN-assisted signal amplification. The biotin- and fluorophore-labeled probes were captured by streptavidin-modified magnetic beads through streptavidin-biotin interactions, thus producing a poor fluorescence signal. Once the DNA probes were hybridized with target miRNA in solution to form DNA-miRNA duplexes, DNA stands in the duplexes would be selectively digested by DSN. The released target miRNA could initiate the next hybridization/cleavage recycling in the homogeneous solution, finally resulting in the release of numerous fluorophore-labeled fragments. The released fluorophores remained in solution and emitted strong fluorescence after treatment by the streptavidin-modified magnetic beads. The immobilization-free method achieved the assays of miRNA-21 with a detection limit down to 0.01 pM. It was employed to evaluate the expression levels of miRNA-21 in different cancer cells with satisfactory results.

Advances in Electrochemical Biosensor Technologies for the Detection of Nucleic Acid Breast Cancer Biomarkers

Breast cancer is the second leading cause of cancer deaths in women worldwide; therefore, there is an increased need for the discovery, development, optimization, and quantification of diagnostic biomarkers that can improve the disease diagnosis, prognosis, and therapeutic outcome. Circulating cell-free nucleic acids biomarkers such as microRNAs (miRNAs) and breast cancer susceptibility gene 1 (BRCA1) allow the characterization of the genetic features and screening breast cancer patients. Electrochemical biosensors offer excellent platforms for the detection of breast cancer biomarkers due to their high sensitivity and selectivity, low cost, use of small analyte volumes, and easy miniaturization. In this context, this article provides an exhaustive review concerning the electrochemical methods of characterization and quantification of different miRNAs and BRCA1 breast cancer biomarkers using electrochemical DNA biosensors based on the detection of hybridization events between a DNA or peptide nucleic acid probe and the target nucleic acid sequence. The fabrication approaches, the biosensors architectures, the signal amplification strategies, the detection techniques, and the key performance parameters, such as the linearity range and the limit of detection, were discussed.

Application of Polypyrrole-Based Electrochemical Biosensor for the Early Diagnosis of Colorectal Cancer

Although colorectal cancer (CRC) is easy to treat surgically and can be combined with postoperative chemotherapy, its five-year survival rate is still not optimistic. Therefore, developing sensitive, efficient, and compliant detection technology is essential to diagnose CRC at an early stage, providing more opportunities for effective treatment and intervention. Currently, the widely used clinical CRC detection methods include endoscopy, stool examination, imaging modalities, and tumor biomarker detection; among them, blood biomarkers, a noninvasive strategy for CRC screening, have shown significant potential for early diagnosis, prediction, prognosis, and staging of cancer. As shown by recent studies, electrochemical biosensors have attracted extensive attention for the detection of blood biomarkers because of their advantages of being cost-effective and having sound sensitivity, good versatility, high selectivity, and a fast response. Among these, nano-conductive polymer materials, especially the conductive polymer polypyrrole (PPy), have been broadly applied to improve sensing performance due to their excellent electrical properties and the flexibility of their surface properties, as well as their easy preparation and functionalization and good biocompatibility. This review mainly discusses the characteristics of PPy-based biosensors, their synthetic methods, and their application for the detection of CRC biomarkers. Finally, the opportunities and challenges related to the use of PPy-based sensors for diagnosing CRC are also discussed.

Genosensing Applications of Glassy Carbon Electrodes Modified with Multi-Walled Carbon Nanotubes Non-Covalently Functionalized with Polyarginine

We report the advantages of glassy carbon electrodes (GCE) modified with multi-walled carbon nanotubes (MWCNTs) non-covalently functionalized with polyarginine (PolyArg) for the adsorption and electrooxidation of different DNAs and the analytical applications of the resulting platform. The presence of the carbon nanostructures, and mainly the charge of the PolyArg that supports them, facilitates the adsorption of calf-thymus and salmon sperm double-stranded DNAs and produces an important decrease in the overvoltages for the oxidation of guanine and adenine residues and a significant enhancement in the associated currents. As a proof-of-concept of possible GCE/MWCNTs-PolyArg biosensing applications, we develop an impedimetric genosensor for the quantification of microRNA-21 at femtomolar levels, using GCE/MWCNTs-PolyArg as a platform for immobilizing the DNA probe, with a detection limit of 3fM, a sensitivity of 1.544 × 10³ Ω M^-1, and a successful application in enriched biological fluids.

Hairpin-inserted cross-shaped DNA nanoprobe for ultrasensitive microRNA detection based on built-in target analogue cycle amplification

It remains technically challenging to develop a sensitive assay system to isothermally amplify the signal for miRNA detection because of its low abundance in tested sample, sequence similarities and existence in complex biological environments. In this study, using miRNA-21 as target model, a hairpin-inserted cross-shaped DNA nanoprobe (CP) with four functional arms is constructed for the ultrasensitive detection of miRNA via one-step built-in target analogue (BTA) cycle-mediated signal amplification. BTA is pre-locked in one arm of CP probe and inactive. In the presence of target miRNA, BTA can be unlocked and initiate an isothermal amplification process. Utilizing as-designed CP probe, miRNA-21 can be detected to down to 500 fM, and the linear response range spans over five orders of magnitude. The nonspecific signal is less than 1% upon nontarget miRNAs. CP probe exhibits ∼six times enhancement in resistance to nuclease degradation and no obvious degradation-induced fluorescence change is detected during the assay period. The recovery yield ranges from 98.2～105.5% in FBS solution. Because of the high sensitivity, desirable specificity, strong anti-interference ability and substantial increase in nuclease resistance, CP probe is a promising tool for the detection of miRNAs in a complex biological milieu.

Nonenzymatic Autonomous Assembly of Cross-Linked Network Structures from Only Two Palindromic DNA Components for Intracellular Fluorescence Imaging of miRNAs

The abnormal expression of miRNA-21 is often found in tumor specimens and cell lines, and thus, its specific detection is an urgent need for the diagnosis and effective therapy of cancers. In this contribution, we demonstrate a palindrome-based hybridization chain reaction (PHCR) upon the stimuli of a short oligonucleotide trigger to perform the autonomous assembly of cross-linked network structures (CNSs) for the amplification detection of miRNA-21 and sensitive fluorescence imaging of cancerous cells. The building blocks are only two palindromic hairpin-type DNA strands that are separately modified with different fluorophores (Cy3 and Cy5), which is easily combined with the catalytic hairpin assembly (CHA) technique that can further amplify the signal output. Utilizing the CHA-PHCR assay system, a small amount of miRNA-21 can activate many triggers via CHA and in turn induce the PHCR-based CNS assembly from more DNA building blocks, bringing Cy3 and Cy5 into close proximity to each other and generating ultrasensitive fluorescence resonance energy transfer signals. As a result, target miRNA can be quantitatively detected down to as low as 10 pM with high assay specificity. The coexisting nontarget miRNAs and other biomacromolecules do not interfere with signal transduction. The developed assay system is suitable for screening different expression levels of miRNA-21 in living cells by fluorescence imaging. The palindrome-based cross-linking assembly can enhance the intracellular stability of assembled nanostructures by at least fivefold and exhibit the good universality for the detection of other miRNAs. Moreover, cancerous cells can be distinguished from healthy cells, and the CHA-PHCR assay is in good accordance with the gold standard PCR method, indicating a promising platform for the diagnosis of human cancers and other genetic diseases.

Sustainable and cascaded catalytic hairpin assembly for amplified sensing of microRNA biomarkers in living cells

The sensing of intracellular microRNAs (miRNAs) is of significance for early-stage disease diagnosis and therapeutic monitoring. DNA is an interesting building material that can be programed into assemblies with rigid and branched structures, especially suitable for imaging intracellular biomolecules or therapeutic drug delivery. Here, by introducing the palindromic sequences into the programmable DNA hairpins, we describe an endogenous target-responsive three-way branched and palindrome-assisted catalytic hairpin assembly (3W-pCHA) approach for imaging miRNA-155 of living tumor cells with high sensitivity. The miRNA-155 triggers autonomous assembly of the fluorescently quenched signal hairpin and two hairpin dimers formed via hybridization of their respective palindromic sequences to yield branched DNA junctions, which carry the unopened hairpins and thus provide addressable substrates for continuous assembly formation of DNA nanostructures. During the formation of the DNA nanostructures, the miRNA-155 is cyclically reused and many signal probes are unfolded to show highly intensified fluorescence for detecting miRNA-155 down to 6.9 pM in vitro with high selectivity. More importantly, these probes can be transfected into live cancer cells to initiate the assembly process triggered by intracellular miRNA-155, which provides a new way for imaging highly under-expressed miRNAs in cells. Besides, this approach can also be employed to differentiate miRNA-155 expression variations in different cells, indicating its promising potentials for early-stage disease diagnosis and biological studies in cells.

Zwitterionic Polymer Electroplating Facilitates the Preparation of Electrode Surfaces for Biosensing

Surface chemistry critically affects the diagnostic performance of biosensors. An ideal sensor surface should be resistant to nonspecific protein adsorption, yet be conducive to analytical responses. Here a new polymeric material, zwitterionic polypyrrole (ZiPPy), is reported to produce optimal surface condition for biosensing electrodes. ZiPPy combines two unique advantages: the zwitterionic function that efficiently hydrates electrode surface, hindering nonspecific binding of hydrophobic proteins; and the pyrrole backbone, which enables rapid (<7 min), controlled deposition of ZiPPy through electropolymerization. ZiPPy-coated electrodes show lower electrochemical impedance and less nonspecific protein adsorption (low fouling), outperforming bare and polypyrrole-coated electrodes. Moreover, affinity ligands for target biomarkers can be immobilized together with ZiPPy in a single-step electropolymerization. ZiPPy-coated electrodes are developed with specificity for severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2). The prepared sensor detects SARS-CoV-2 antibodies in human saliva down to 50 ng mL^-1 , without the need for sample purification or secondary labeling.

Multielectrode Spectroscopy Enables Rapid and Sensitive Molecular Profiling of Extracellular Vesicles

Detecting protein markers in extracellular vesicles (EVs) is becoming a useful tool for basic research and clinical diagnoses. Most EV protein assays, however, require lengthy processes-conjugating affinity ligands onto sensing substrates and affixing EVs with additional labels to maximize signal generation. Here, we present an iPEX (impedance profiling of extracellular vesicles) system, an all-electrical strategy toward fast, multiplexed EV profiling. iPEX adopts one-step electropolymerization to rapidly functionalize sensor electrodes with antibodies; it then detects EV proteins in a label-free manner through impedance spectroscopy. The approach streamlines the entire EV assay, from sensor preparation to signal measurements. We achieved (i) fast immobilization of antibodies (<3 min) per electrode; (ii) high sensitivity (500 EVs/mL) without secondary labeling; and (iii) parallel detection (quadruple) in a single chip. A potential clinical utility was demonstrated by directly analyzing plasma samples from glioblastoma multiforme patients.

Self-Protected DNAzyme Walker with a Circular Bulging DNA Shield for Amplified Imaging of miRNAs in Living Cells and Mice

Abnormal expression of miRNAs is often detected in various human cancers. DNAzyme machines combined with gold nanoparticles (AuNPs) hold promise for detecting specific miRNAs in living cells but show short circulation time due to the fragility of catalytic core. Using miRNA-21 as the model target, by introducing a circular bulging DNA shield into the middle of the catalytic core, we report herein a self-protected DNAzyme (E) walker capable of fully stepping on the substrate (S)-modified AuNP for imaging intracellular miRNAs. The DNAzyme walker exhibits 5-fold enhanced serum resistance and more than 8-fold enhanced catalytic activity, contributing to the capability to image miRNAs much higher than commercial transfection reagent and well-known FISH technique. Diseased cells can accurately be distinguished from healthy cells. Due to its universality, DNAzyme walker can be extended for imaging other miRNAs only by changing target binding domain, indicating a promising tool for cancer diagnosis and prognosis.

Evolution of nucleic acids biosensors detection limit III

This review is an update of two previous ones focusing on the limit of detection of electrochemical nucleic acid biosensors allowing direct detection of nucleic acid target (miRNA, mRNA, DNA) after hybridization event. A classification founded on the nature of the electrochemical transduction pathway is established. It provides an overall picture of the detection limit evolution of the various sensor architectures developed during the last three decades and a critical report of recent strategies.

Surface plasmon resonance biosensor for the detection of miRNAs by combining the advantages of homogeneous reaction and heterogeneous detection

The hybridization and enzymolysis reactions for nucleic acid detection were carried out on the chip surface in the traditional surface plasmon resonance (SPR) biosensors. Herein, we proposed an innovative method for microRNA (miRNA) detection in which the hybridization-enzymolysis recycling reactions were performed in solution. Duplex-specific nuclease (DSN) and streptavidin-modified gold nanoparticles (SA-AuNPs) were employed for enhancing the assay sensitivity. In the absence of miRNA, the biotinylated DNA probe (bio-DNA-bio, biotin tags at both the 3' and 5' termini of DNA) was attached to the SA-modified chip through the SA-biotin binding, allowing the capture of SA-AuNPs with the same interaction. As a result, a larger SPR signal was attained. However, in the presence of miRNA, bio-DNA-bio hybridized with miRNA was digested by DSN. In this process, the miRNA strand remained intact and participated in the next hybridization-enzymolysis recycling process. Thus, one miRNA could promote the hydrolysis of many bio-DNA-bio probes and allow the generation of numerous bio-DNA fragments. Meanwhile, the produced bio-DNA competed with the undigested bio-DNA-bio to bind SA on the chip surface. The digestion of bio-DNA-bio and the competitive binding between bio-DNA-bio and bio-DNA led to the attachment of fewer SA-AuNPs and then smaller SPR signals. The change in SPR signal at the concentration as low as 1 fM miRNA has been readily determined. The strategy possessed the advantageous properties of simple operation, fast response, high sensitivity and excellent specificity, serving as a viable means for the fabrication of novel sensing platforms.

A β-Amyloid(1-42) Biosensor Based on Molecularly Imprinted Poly-Pyrrole for Early Diagnosis of Alzheimer's Disease

Background:

Alzheimer’s disease (AD) is a common form of dementia, characterized by production and deposition of β-amyloid peptide in the brain. Thus, β-amyloid peptide is a potentially promising biomarker used to diagnose and monitor the progression of AD.

Objective:

The study aims to develop a biosensor based on a molecularly imprinted poly-pyrrole for detection of β-amyloid.

Material and Methods:

In this experimental study, an imprinted poly-pyrrole was employed as an artificial receptor synthesized by electro-polymerization of pyrrole on screen-printed carbon electrodes in the presence of β-amyloid. β-amyloid acts as a molecular template within the polymer. The biosensor was evaluated by cyclic voltammetry using ferro/ferricyanide marker. The parameters influencing the biosensor performance, including electro-polymerization cycle umbers and β-amyloid binding time were optimized to achieve the best biosensor sensitivity.

Results:

The β-amyloid binding affinity with the biosensor surface was evaluated by the Freundlich isotherm, and Freundlich constant and exponent were obtained as 0.22 ng mL^-1 and 10.60, respectively. The biosensor demonstrated a detection limit of 1.2 pg mL^-1. The biosensor was applied for β-amyloid determination in artificial cerebrospinal fluid.

Conclusion:

The biosensor is applicable for early Alzheimer’s disease detection.

A highly sensitive electrochemical microRNA-21 biosensor based on intercalating methylene blue signal amplification and a highly dispersed gold nanoparticles/graphene/polypyrrole composite

Numerous clinical studies suggest that microRNAs (miRNAs) are indicative biomolecules for the early diagnosis of cancer. This work aims to develop a cost-effective and label-free electrochemical biosensor to detect miRNA-21, a biomarker of breast cancer. An electrochemical sensor is fabricated using a nanocomposite, consisting of graphene (GP), polypyrrole (PPY) and gold nanoparticles (AuNPs), modified onto a screen-printed carbon electrode (SPCE) to improve electron transfer properties and increase the degree of methylene blue (MB) intercalation for signal amplification. The GP/PPY-modified electrode offers good electrochemical reactivity and high dispersibility of AuNPs, resulting in excellent sensor performance. Peak current of the MB redox process, which is proportional to miRNA-21 concentration on the electrode surface, is monitored by differential pulse voltammetry (DPV). Under optimal conditions, this sensor is operated by monitoring the MB signal response due to the amount of hybridization products between miRNA-21 target molecules and DNA-21 probes immobilized on the electrode. The proposed biosensor reveals a linear range from 1.0 fM to 1.0 nM with a low detection limit of 0.020 fM. In addition, the miRNA-21 biosensor provides good selectivity, high stability, and satisfactory reproducibility, which shows promising potential in clinical research and diagnostic applications.

New trends in the development of electrochemical biosensors for the quantification of microRNAs

MicroRNAs (miRNAs) are non-coding regulatory RNAs that play an important role in RNA silencing and post-transcriptional gene expression regulation. Since their dysregulation has been associated with Alzheimer disease, cardiovascular diseases and different types of cancer, among others, miRNAs can be used as biomarkers for early diagnosis and prognosis of these diseases. The methods commonly used to quantify miRNAs are, in general, complex, costly, with limited application for point-of-care devices or resource-limited facilities. Electrochemical biosensors, mainly those based on nanomaterials, have emerged as a promising alternative to the conventional miRNA detection methods and have paved the way to the development of sensitive, fast, and low-cost detection systems. This review is focused on the most relevant contributions performed in the field of electrochemical miRNAs biosensors between 2017 and the beginning of 2020. The main contribution of this article is the critical discussion of the different amplification strategies and the comparative analysis between amplified and non-amplified miRNA electrochemical biosensing and between the different amplification schemes. Particular emphasis was given to the importance of the nanostructures, enzymes, labelling molecules, and special sequences of nucleic acids or analogues on the organization of the different bioanalytical platforms, the transduction of the hybridization event and the generation the analytical signal.

Sensitive and enzyme-free fluorescence polarization detection for miRNA-21 based on decahedral sliver nanoparticles and strand displacement reaction

A highly sensitive method for miRNA-21 detection has been developed, which relied on the principle of strand displacement reaction to achieve asymmetric signal amplification and combined with the enhanced effect of Ag₁₀NPs.

A self-powered origami paper analytical device with a pop-up structure for dual-mode electrochemical sensing of ATP assisted by glucose oxidase-triggered reaction

A self-powered origami paper-based analytical device (oPAD), being with a pop-up structure as mechanical valve to first realize dual-mode of differential pulse voltammery (DPV)/supercapacitor amplified signal read out systems, was designed for detecting adenosine 5'-triphosphate (ATP) assisted by glucose oxidase (GOx)-triggered reaction. In order to accommodate the alternative step for dual-mode detection, a pop-up structure inspired by pop-up greeting cards was developed, making it possible to change the fluidic path with good registration and repeatability. To realize supercapacitor detection mode, a sandwich structure of a DNA sequence (DNA1), aptamer and a DNA sequence modified with GOx (GOx-DNA2) was formed on detection zone by hybridization reaction. With the addition of ATP, the GOx-DNA2 could be released with the specific binding between ATP and aptamer, and flowed into the reaction zone to catalyze the oxidation of glucose. Due to the difference in concentrations of [Fe(CN)₆]^3- and [Fe(CN)₆]^4- caused by the GOx-triggered reaction, a voltage could be produced to charge a paper supercapacitor which could provide a high instantaneous current with a digital multimeter to transduce the result of the assay, and realize the self-generation of an amplified electrical signal. By simply varying the direction of pop-up structure, the electrochemical signal from DPV read out mode could be achieved through catalytic oxidation of glucose by the remaining GOx-DNA2 on the detection zone. The proposed self-powered oPAD enabled the sensitive diagnosis of ATP in a linear range of 10-5000 nM with a limit of detection of 3 nM and 1.4 nM, respectively.

Multi-threshold and multi-input DNA logic design style for profiling the microRNA biomarkers of real cancers

Early detection of cancer is very critical because it can reduce the treatment risk and cost. MicroRNAs (miRNAs) have been introduced in recent years as an efficient class of biomarkers for cancer early detection. Now, real-time polymerase chain reaction has been used to profile the miRNA expression, which is costly, time consuming and low accuracy. Most recently, DNA logic gates are used to detect the miRNA expression level that is more accurate and faster than previous methods. The DNA-based logic gates face with serious challenges such as the large complexity and low scalability. In this study, the authors proposed a methodology to design multi-threshold and multi-input DNA-based logic gates in response to specific miRNA inputs in live mammalian cells. The proposed design style can simultaneously recognise multiple miRNAs with different rising and falling thresholds. The design style has been evaluated on the lung cancer biomarkers and the experimental results show the efficiency of the proposed method in terms of accuracy, efficiency and speed.

Cost-effective monitoring of microRNA-205 applied as a biomarker using G-quadruplex DNAzyme and 1,1'-oxalyldiimidazole chemiluminescence

Trace levels of microRNA-205, known as a biomarker of lung cancer, in human serum was quantified for the first-time using G-quadruplex DNAzyme linked to detection complementary probe and 1,1'-oxalyldiimidazole chemiluminescence (ODI-CL). First, capture complementary probes immobilized on the surface of paramagnetic bead selectively bound with microRNA-205 existing in human serum. Then, with the addition of detection complementary probe linked to hemin aptamer, a complex linked to hemin aptamer was formed with the completion of hybridization between microRNA-205 and two complementary probes. With the addition of hemin in the solution, finally, a complex linked to G-quadruplex DNAzyme was formed from the interaction of hemin aptamer and hemin. Resorufin, luminescent dye, was formed from the reaction of Amplex Red and H₂O₂ in the presence of the complex linked to DNAzyme acting as a horseradish peroxidase (HRP)-mimicking enzyme. The concentration of resorufin formed from the reaction was dependent on the concentration of microRNA-205 in human serum. Thus, the brightness of resorufin emitted in ODI-CL reaction was enhanced with the increase of microRNA-205. The limit of detection (LOD) of the biosensor with ODI-CL detection, capable of sensing microRNA-205 (dynamic range: 0.4-62.5 nM), was as low as 0.13 nM. It was confirmed that the biosensor can quantify trace levels of microRNA-205 with statistically acceptable accuracy, precision, and recovery.

Electrochemical xanthine detection by enzymatic method based on Ag doped ZnO nanoparticles by using polypyrrole

A sensitive electrochemical detection of xanthine (X), which is an early biomarker of fish meat spoilage, was achieved by a novel biosensor developed via three main steps. The first step is the electropolymerization of a conducting polymer (pyrrole) onto the pencil graphite electrode (PGE). The second step is the entrapment of silver-doped zinc oxide nanoparticles (nano Ag-ZnO) onto PGE, which has already been doped with polypyrrole (PPy). The third step is the immobilization of the enzyme (xanthine oxidase) onto the modified electrode (nano Ag-ZnO/PPy/PGE) surface. The biosensor was characterized by scanning electron microscopy (SEM). The addition of Ag-doped ZnO nanoparticles into the conducting polymer structure played an important role in the performance of the biosensor by increasing the porous structure of the conducting polymer surface. The electrochemical behaviour of the biosensor was studied by electrochemical impedance spectroscopy (EIS) and chronoamperometry (CA). This enzyme biosensor showed the maximum response at pH 7.40 when +0.7 V was applied to reach 95% of steady-state current at ~3.2 s. The designed biosensor showed high selectivity with a sensitivity of 0.03 μA/mM and a low detection limit of 0.07 μM.

Fluorometric determination of microRNA-122 by using ExoIII-aided recycling amplification and polythymine induced formation of copper nanoparticles

The authors describe a method for the determination of microRNA-122 by using terminal deoxynucleotidyl transferase (TdT). It is based on the use of polythymine and exonuclease III-aided cycling amplification. A 3'-phosphorylated hairpin probe 1 (H₁) and a hairpin probe 2 (H₂) were designed. In the presence of the microRNA, hybridization and enzymatic cleavage will occur and produce lots of 3'-hydroxylated ssDNA which can be tailed by TdT and converted into long polythymine (polyT) sequences. These can be used to synthesize copper nanoparticles (CuNPs) with fluorescence excitation/emission maxima at 350 nm/630 nm. This method shows good selectivity and high sensitivity with a linear response in the 1.00 × 10² fM and 1.00 × 10⁶ fM microRNA concentration range and a 44 fM limit of detection. It was successfully applied to determination of microRNA in spiked serum samples. Graphical abstract A label-free and highly sensitive fluorometric method is described for the assay of microRNA on the basis of target-triggered two-cycle amplification and combining with terminal TdT. It produces a series superlong polyT that can be used for synthesis of copper nanoclusters (CuNCs) displaying red fluorecence.

Molecular methods in electrochemical microRNA detection

High-throughput profiling/sensing of nucleic acids has recently emerged as a highly promising strategy for the early diagnosis and improved prognosis of a broad range of pathologies, most notably cancer. Among the potential biomarker candidates, microRNAs (miRNAs), a class of non-coding RNAs of 19-25 nucleotides in length, are of particular interest due to their role in the post-transcriptional regulation of gene expression. Developing miRNA sensing technologies that are quantitative, ultrasensitive and highly specific has proven very challenging because of their small size, low natural abundance and the high degree of sequence similarity among family members. When compared to optical based methods, electrochemical sensors offer many advantages in terms of sensitivity and scalability. This non-comprehensive review aims to break-down and highlight some of the most promising strategies for electrochemical sensing of microRNA biomarkers.

Carbon Black-Modified Electrodes Screen-Printed onto Paper Towel, Waxed Paper and Parafilm M®

Herein, we evaluated the use of paper towel, waxed paper, and Parafilm M^® (Heathrow Scientific, Vernon Hills, IL, USA) as alternative substrates for screen-printed sensor manufacturing. Morphological study was performed to evaluate the adhesion of the ink on these uncommon substrates, as well as the morphology of the working electrode. The electrochemical characterization was carried out using ferricyanide/ferrocyanide as redox couple. To enhance the electrochemical properties of the developed sensors, the nanomaterial carbon black was used as nanomodifier. The modification by drop casting of the working electrode surface, using a stable dispersion of carbon black, allows to obtain a sensor with improved electrochemical behavior in terms of peak-to-peak separation, current intensity, and the resistance of charge transfer. The results achieved confirm the possibility of printing the electrode on several cost-effective paper-based materials and the improvement of the electrochemical behavior by using carbon black as sustainable nanomaterial.