Facile synthesis of Prussian blue nanocubes/silver nanowires network as a water-based ink for the direct screen-printed flexible biosensor chips

A rapid and ultrasensitive cardiac troponin I aptasensor based on an ion-sensitive field-effect transistor with extended gate

Acute myocardial infarction (AMI) is a life-threatening disease with a short course and a high mortality rate. However, it is still a great challenge to achieve the on-site diagnosis of this disease within minutes, meaning there is an urgent need to develop an efficient technology for realizing the rapid diagnosis and early warning of AMI in clinical emergencies. In this study, an ultrasensitive electrochemical aptasensor based on an extended-gate ion-sensitive field-effect transistor (EGISFET) was designed to achieve the quantitative assay of cardiac troponin I (cTnI), which is a highly sensitive and specific biomarker of AMI, within only 5 min. The EGISFET exhibits extremely high detection sensitivity due to its separated structure with a large sensing area and the surface-modified Prussian blue-gold nanoparticles (PB-AuNPs) composite, which serves as a signal magnifier and DNA loading platform for good electrocatalytic ability with a large specific area. Additionally, a target-induced strand-release strategy is proposed to shorten the recognition time of cTnI using a particular DNA strand. Under optimal conditions, the as-prepared aptasensor exhibits a wide linear range of 1-1000 pg/mL, an ultralow detection limit of 0.3 pg/mL, and reliable detection results in real serum samples. It is highly anticipated that this EGISFET-based aptasensor will have broad applications in the early warning and rapid diagnosis of AMI and other acute diseases in emergency treatment.

Multi-scale bioimpedance flexible sensing with causal hierarchical machine learning for fish vitality evaluation under adversity stress

It is expected that waterless low-temperature stressful environments will induce stress responses in fish and affect their vitality. In this study, we developed a laser-activated, stretchable, highly conductive liquid metal (LM) based flexible sensor system for fish multi-scale bioimpedance detection. It has excellent conformability, electrical conductivity, bending and cyclic tensile stability. Meanwhile, test result showed that wireless power supply is a potential solution for realizing safe power supply for devices inside waterless low-temperature packages. In addition, a hierarchical regression model (GC-HRM) based on Granger causality was established. The result showed that tissue bioimpedance can induce changes in individual bioimpedance with unidirectional Granger causality. The R2 of the linear regression (LR), support vector regression (SVR) and artificial neural network (ANN) models under single-scale individual bioimpedance were 0.85, 0.90 and 0.78, respectively. By adding the multi-scale bioimpedance features, the R2 of the LR, SVR and ANN models were improved to 0.95, 1.00 and 0.98, respectively.

A modified Prussian blue biosensor with improved stability based on the use of self-assembled monolayers and polydopamine for quantitative L-glutamate detection

A miniature L-glutamate (L-Glu) biosensor is described based on Prussian blue (PB) modification with improved stability by using self-assembled monolayers (SAMs) technology and polydopamine (PDA). A gold microelectrode (AuME) was immersed in NH2(CH2)6SH-ethanol solution, forming well-defined SAMs via thiol-gold bonding chemistry which increased the number of deposited Prussian blue nanoparticles (PBNPs) and confined them tightly on the AuME surface. Then, dopamine solution was dropped onto the PBNPs surface and self-polymerized into PDA to protect the PB structure from destruction. The PDA/PB/SAMs/AuME showed improved stability through CV measurements in comparison with PB/AuME, PB/SAMs/AuME, and PDA/PB/AuME. The constructed biosensor achieved a high sensitivity of 70.683 nA µM-1 cm-2 in the concentration range 1-476 µM L-Glu with a low LOD of 0.329 µM and performed well in terms of selectivity, reproducibility, and stability. In addition, the developed biosensor was successfully applied to the determination of L-Glu in tomato juice, and the results were in good agreement with that of high-performance liquid chromatography (HPLC). Due to its excellent sensitivity, improved stability, and miniature volume, the developed biosensor not only has a promising potential for application in food sample analysis but also provides a good candidate for monitoring L-Glu level in food production.

Hollow Prussian blue with ultrafine silver nanoparticle agents (Ag-HPB) integrated sensitive and flexible biosensing platform with highly enzyme loading capability

Herein, the hollow Prussian blue with ultra-small silver nanoparticle agents (Ag-HPB) was prepared by the coating-etching method by applying Prussian blue (PB) coating on Ag nanoparticles (Ag NPs) and diffusing Ag NPs into the PB framework. The flexible biosensing platform based on Ag-HPB nanocomposites incorporated the excellent electrical conductivity of Ag NPs and the superior enzyme loading capacity of the hollow structure, which significantly enhanced its sensing performance. Subsequently, take glucose oxidase (GOx) and acetylcholinesterase (AChE) as examples. The sensing platform displayed a good sensitive response to glucose (Glu) (24.37 μA mM-1 cm-2) and a considerable limit of detection (LOD) for trichlorfon (TCF) as 2.28 pg/mL while exhibiting high stability and good reproducibility. Moreover, it can be applied to monitor trichlorfon in apple samples. Promisingly, the Ag-HPB prepared by the coating-etching strategy provides a reliable strategy for further development of sensitive and flexible biosensing platforms with excellent electrical conductivity and high enzyme loading.

Cofactor Metabolic Engineering of Escherichia coli for Aerobic L-Malate Production with Lower CO2 Emissions

Escherichia coli has been engineered for L-malate production via aerobic cultivation. However, the maximum yield obtained through this mode is inferior to that of anaerobic fermentation due to massive amounts of CO2 emissions. Here, we aim to address this issue by reducing CO2 emissions of recombinant E. coli during aerobic L-malate production. Our findings indicated that NADH oxidation and ATP-synthesis-related genes were down-regulated with 2 g/L of YE during aerobic cultivations of E. coli E23, as compared to 5 g/L of YE. Then, E23 was engineered via the knockout of nuoA and the introduction of the nonoxidative glycolysis (NOG) pathway, resulting in a reduction of NAD+ and ATP supplies. The results demonstrate that E23 (ΔnuoA, NOG) exhibited decreased CO2 emissions, and it produced 21.3 g/L of L-malate from glucose aerobically with the improved yield of 0.43 g/g. This study suggests that a restricted NAD+ and ATP supply can prompt E. coli to engage in incomplete oxidization of glucose, leading to the accumulation of metabolites instead of utilizing them in cellular respiration.

Synthesis and Applications of Prussian Blue and Its Analogues as Electrochemical Sensors

Prussian blue (PB) and its analogue (PBA) are a kind of representative cyanide-based coordination polymer. They have received enormous research interest and have shown promising applications in the electrochemical sensing field due to their excellent electrochemical activity and unique structural characteristics including open framework structure, high specific surface area, and adjustable metal active sites. In this review, we summarize the latest research progress of PB/PBA as an electrochemical sensor in detail from three aspects: fabrication strategy, synthesis method and electrochemical sensor application. For the fabrication strategy, we discussed different fabrication methods containing the combination of PBA and carbon materials, metal nanoparticles, polymers, etc., respectively, as well as their corresponding sensing mechanism for improving performance. We also presented the synthesis methods of PB/PBA materials in detail, such as: coprecipitation, hydrothermal and electrodeposition. In addition, the effects of different methods on the morphology, particle size and productivity of PB/PBA materials are also concluded. For the application of electrochemical sensors, the latest progress of such materials as electrochemical sensors for glucose, H2O2, toxic compounds, and biomolecules have been summarized. Finally, we conclude remaining challenges of PB/PBA-based materials as electrochemical sensors, and provide personal perspectives for future research in this field.

A nanoselenium-coating biomimetic cytomembrane nanoplatform for mitochondrial targeted chemotherapy- and chemodynamic therapy through manganese and doxorubicin codelivery

The cell membrane is widely considered as a promising delivery nanocarrier due to its excellent properties. In this study, self-assembled Pseudomonas geniculate cell membranes were prepared with high yield as drug nanocarriers, and named BMMPs. BMMPs showed excellent biosafety, and could be more efficiently internalized by cancer cells than traditional red cell membrane nanocarriers, indicating that BMMPs could deliver more drug into cancer cells. Subsequently, the BMMPs were coated with nanoselenium (Se), and subsequently loaded with Mn²⁺ ions and doxorubicin (DOX) to fabricate a functional nanoplatform (BMMP-Mn²⁺/Se/DOX). Notably, in this nanoplatform, Se nanoparticles activated superoxide dismutase-1 (SOD-1) expression and subsequently up-regulated downstream H₂O₂ levels. Next, the released Mn²⁺ ions catalyzed H₂O₂ to highly toxic hydroxyl radicals (·OH), inducing mitochondrial damage. In addition, the BMMP-Mn²⁺/Se nanoplatform inhibited glutathione peroxidase 4 (GPX4) expression and further accelerated intracellular reactive oxygen species (ROS) generation. Notably, the BMMP-Mn²⁺/Se/DOX nanoplatform exhibited increased effectiveness in inducing cancer cell death through mitochondrial and nuclear targeting dual-mode therapeutic pathways and showed negligible toxicity to normal organs. Therefore, this nanoplatform may represent a promising drug delivery system for achieving a safe, effective, and accurate cancer therapeutic plan.

Syntheses of Silver Nanowires Ink and Printable Flexible Transparent Conductive Film: A Review

Nowadays, flexible transparent conductive film (FTCF) is one of the important components of many flexible electronic devices. Due to comprehensive performances on optoelectronics, FTCF based on silver nanowires (AgNWs) networks have received great attention and are expected to be a new generation of transparent conductive film materials. Due to its simple process, printed electronic technology is now an important technology for the rapid production of low-cost and high-quality flexible electronic devices. AgNWs-based FTCF fabricated by using printed electronic technology is considered to be the most promising process. Here, the preparation and performance of AgNW ink are introduced. The current printing technologies are described, including gravure printing, screen printing and inkjet printing. In addition, the latest methods to improve the conductivity, adhesion, and stability of AgNWs-based FTCF are introduced. Finally, the applications of AgNWs-based FTCF in solar cells, transparent film heaters, optoelectronic devices, touch panel, and sensors are introduced in detail. Therefore, combining various printing technologies with AgNWs ink may provide more opportunities for the development of flexible electronic devices in the future.

Metabolic engineering of Escherichia coli for L-malate production anaerobically

Background

l-malate is one of the most important platform chemicals widely used in food, metal cleaning, textile finishing, pharmaceuticals, and synthesis of various fine chemicals. Recently, the development of biotechnological routes to produce l-malate from renewable resources has attracted significant attention.

Results

A potential l-malate producing strain E. coli BA040 was obtained by inactivating the genes of fumB, frdABCD, ldhA and pflB. After co-overexpression of mdh and pck, BA063 achieved 18 g/L glucose consumption, leading to an increase in l-malate titer and yield of 13.14 g/L and 0.73 g/g, respectively. Meantime, NADH/NAD⁺ ratio decreased to 0.72 with the total NAD(H) of 38.85 µmol/g DCW, and ATP concentration reached 715.79 nmol/g DCW. During fermentation in 5L fermentor with BA063, 41.50 g/L glucose was consumed within 67 h with the final l-malate concentration and yield of 28.50 g/L, 0.69 g/g when heterologous CO₂ source was supplied.

Conclusions

The availability of NAD(H) was correlated positively with the glucose utilization rate and cellular metabolism capacities, and lower NADH/NAD⁺ ratio was beneficial for the accumulation of l-malate under anaerobic conditions. Enhanced ATP level could significantly enlarge the intracellular NAD(H) pool under anaerobic condition. Moreover, there might be an inflection point, that is, the increase of NAD(H) pool before the inflection point is followed by the improvement of metabolic performance, while the increase of NAD(H) pool after the inflection point has no significant impacts and NADH/NAD⁺ ratio would dominate the metabolic flux. This study is a typical case of anaerobic organic acid fermentation, and demonstrated that ATP level, NAD(H) pool and NADH/NAD⁺ ratio are three important regulatory parameters during the anaerobic production of l-malate.

In situ fabrication of aloe-like Au-ZnO micro/nanoarrays for ultrasensitive biosensing of catechol

Currently, the large-scale and controllable fabrication of nanostructures on substrates remains a great challenge for further practical applications. In this work, a novel 3D aloe-like Au-ZnO nanocomposite was designed for in situ synthesis on an ITO substrate, achieving real-time detection of trace catechol (CC) in water. A seed-assisted hydrothermal approach was proposed to control the crystal distribution and growth direction to build a ZnO aloe-like architecture. To eliminate the natural weak conductivity of ZnO, Au nanoparticles were further deposited on all ZnO arrays to construct Au-ZnO micro/nanostructures. The synergetic effects derived from the aloe-like ZnO with a large specific area and Au nanoparticles with high conductivity resulted in both high electrocatalysis and fast electron transfer in enzymatic reactions. After laccase immobilization, the as-prepared biosensor exhibited specific recognition of catechol among other dihydroxybenzenes and phenol with an ultrahigh sensitivity of 131 μA mM^-1, as well as an extremely wide linear range from 75 nM to 1100 μM and an ultralow detection limit of 25 nM. In addition, in the detection of real lake samples, this biosensor showed satisfactory anti-interference ability and provided reliable assay results.

The effect of adjusting the stroke value of jet dispenser on the performance of glucose biosensor with gold-plated electrode

This study investigates the effect of dispensing glucose oxidase enzyme onto the reaction zone of a golden electrode via a jetting dispenser. Each droplet of enzyme solution dispensed onto the reaction zone of golden electrode weighs exactly the same at around 0.4 mg. This study shows that the spring and needle assembly can be controlled by adjusting the stroke value of the stroke adjustment knob to generate different jet dispensing effects, thus affecting the change of droplets of glucose oxidase enzyme solution within the reaction zone of the golden electrode. This study performs experiments using three stroke values, which are 0.8, 1.2, and 1.6 mm. The experimental results show that adjusting the stroke value to change the droplet of the dispensing liquid will significantly affect the accuracy of the test strip reading value. When the stroke value is adjusted to 1.5 mm, the standard deviation of the test strip is 3.8 mg/dL and the coefficient of variation is 4.1%–6.1%. The study suggested that adjusting the stroke value can stabilize the dispensed droplet to increase the stability of test strip reading, improving the accuracy of the test strip reading. This adjustment method can also be applied to the process of other biochemical sensors.

Metabolic Regulation of Organic Acid Biosynthesis in Actinobacillus succinogenes

Actinobacillus succinogenes is one of the most promising strains for succinic acid production; however, the lack of efficient genetic tools for strain modification development hinders its further application. In this study, a markerless knockout method for A. succinogenes using in-frame deletion was first developed. The resulting ΔpflA (encode pyruvate formate lyase 1-activating protein) strain displayed distinctive organic acid synthesis capacity under different cultivation modes. Additional acetate accumulation was observed in the ΔpflA strain relative to that of the wild type under aerobic conditions, indicating that acetate biosynthetic pathway was activated. Importantly, pyruvate was completely converted to lactate under anaerobic fermentation. The transcription analysis and enzyme assay revealed that the expression level and specific activity of lactate dehydrogenase (LDH) were significantly increased. In addition, the mRNA expression level of ldh was nearly increased 85-fold compared to that of the wild-type strain during aerobic-anaerobic dual-phase fermentation, resulting in 43.05 g/L lactate. These results demonstrate that pflA plays an important role in the regulation of C3 flux distribution. The deletion of pflA leads to the improvement of acetic acid production under aerobic conditions and activates lactic acid biosynthesis under anaerobic conditions. This study will help elaborate the mechanism governing organic acid biosynthesis in A. succinogenes.

Graphene oxide mediated reduction of silver ions to silver nanoparticles under environmentally relevant conditions: Kinetics and mechanisms

We systematically investigated the reduction mechanisms and reduction kinetics of silver ions (Ag ions) by graphene oxide (GO) under ambient condition. UV-vis spectroscopy, transmission electron microscopy, and electron diffraction results revealed that silver nanoparticles (Ag NPs) could be formed from aqueous Ag ions in the presence of GO at pH 8 under light. Formation of Ag NPs increased with increasing pH (7.4, 8, and 9) and temperature (from 30 to 90); however, the increasing ionic strength and dissolved oxygen reduced the Ag NPs yield. The Ag ions reduction by GO followed pseudo-first-order kinetics under both dark and light, and light irradiation significantly accelerated the Ag NPs formation induced by GO. The phenolic-OH on GO was the dominating electron donator for Ag ion reduction in dark. Exposure to light increased the concentration of phenolic-OH on the GO surface, thereby stimulating the reduction rate of Ag ions by GO. In addition, the light induced electron-hole pairs on GO surface and light activated oxygen-centered radicals on GO surface promoted the reduction of adsorbed Ag ions by GO. Our findings provide important information for the role of GO in reducing Ag ions to Ag NPs in aquatic environments, and shed light on understanding the environmental fate and risk of both Ag ions and GO materials.

Electrochemical mercury biosensors based on advanced nanomaterials

This review presents an overview of the synthesis strategies and electrochemical performance of recently developed nanomaterials for the Hg²⁺ assay.

Metabolic Engineering of Escherichia coli for High Yield Production of Succinic Acid Driven by Methanol

Methanol is increasingly becoming an attractive carbon feedstock for the production of various biochemicals due to its high abundance and low price. In this study, when methanol assimilation module was introduced into succinic acid producing Escherichia coli by employing the NAD-dependent methanol dehydrogenase from Bacillus methanolicus and ribulose monophosphate pathway from different donor organisms, succinic acid yield was increased from 0.91 ± 0.08 g/g to 0.98 ± 0.11 g/g with methanol as an auxiliary substrate under the anaerobic fermentation. Further ¹³C-labeling experiments showed that the recombinant strain successfully converted methanol into succinic acid, as the carbon atom of carboxyl group in succinic acid was labeled by ¹³C. It was found that the NADH generated by methanol oxidation would benefit succinate production, as the NADH/NAD⁺ ratio in vivo was decreased from 0.67 to 0.45 in the engineered strain, indicating that the efficiency of succinic acid synthesis was significantly improved when driven by methanol. This study represents a successful case for the development of reducing chemical production using methanol as an auxiliary substrate.

Simultaneous biosensing of catechol and hydroquinone via a truncated cube-shaped Au/PBA nanocomposite

A simultaneous testing of the trace catechol (CC) and hydroquinone (HQ) was achieved via an ultrasensitive phenolic biosensor constructed by the truncated cube-shaped gold/Prussian blue analogue (Au/PBA) nanocomposites. A facile charge-assembly strategy was developed to drive the successive mutual attractions for the crystallization among [Fe(CN)₆]^3-, Co²⁺, and [AuCl₄]^- reactants, benefiting the in-situ growth of Au nanoparticles on all faces of the PBA truncated nanocubes. On account of this special architecture, numerous 10 nm Au particles can rapidly gather the electrons from the enzyme reaction to a PBA crystal due to their high conductivity, and then the current signals will be significantly magnified through the reversible redox of the PBA. Using this nanomaterial, the as-prepared biosensor has shown an extreme wide linear range (CC: 0.2-550 µM, HQ: 1-550 µM) and an ultralow detection limit (CC: 0.06 ± 0.001 µM, HQ: 0.3 ± 0.007 µM) for the independent detections of CC and HQ. More importantly, when the two targets coexist, this biosensor can simultaneously exhibit the obvious and accurate responses of CC and HQ at the different potentials (0.17 V for CC and 0.07 V for HQ) with the high sensitivities and rare mutually interferences.

Direct growth of CuCo2S4 nanosheets on carbon fiber textile with enhanced electrochemical pseudocapacitive properties and electrocatalytic properties towards glucose oxidation

Flexible and wearable electronic devices with excellent performance have been desired for making the next generation of electronic products. Herein, the synthesis of CuCo₂S₄ nanosheets on flexible carbon fiber textile (CFT) by a facile one-step and scalable hydrothermal procedure is reported, which is free from the sulphurization process used in the conventional synthesis of mixed metal sulphospinels. The as-prepared CuCo₂S₄ nanostructures on CFT can provide rich reaction sites and short ion diffusion paths. The CuCo₂S₄ nanosheets are employed as the free-standing electrodes for two different applications: high-performance supercapacitors and non-enzymatic glucose sensors. When employed as a flexible electrode material for supercapacitors, the electrode presents ultrahigh performance in energy storage with a specific capacitance of 3321.6 F g^-1 at 5 A g^-1, which is attributed to the suitable mass loading and special morphology of the as-prepared nanosheets. Remarkably, a specific capacitance of 2931.4 F g^-1 is still retained at the high current density of 30 A g^-1, suggesting its excellent rate capability. The specific capacitance retains 87.1% after 3000 cycles, reflecting excellent cycling performance. For real applications, a flexible symmetric supercapacitor is assembled based on CuCo₂S₄ nanosheets, which achieves a high energy density of 64.6 W h kg^-1 at 499.7 W kg^-1 and a maximum power density of 2081.5 W kg^-1 at 45.1 W h kg^-1. Besides serving as a free-standing electrode for non-enzymatic glucose sensors, CuCo₂S₄ nanosheets have remarkable electrocatalytic activity towards glucose oxidation with a high sensitivity of 3852.7 μA mM^-1 cm^-2 and an extraordinary linear range up to 3.67 mM. The experimental results suggest that CuCo₂S₄ nanosheets are more suitable for non-enzymatic glucose sensors than the related single/binary transition metal oxides/sulfides. Such a superior performance demonstrates that CuCo₂S₄ nanosheets hold great potential for use as flexible multifunctional electronic devices including supercapacitors and non-enzymatic glucose sensors.

Expression of global regulator IrrE for improved succinate production under high salt stress by Escherichia coli

Poor high salt stress resistance remained as a main hurdle limiting the efficient bio-based succinic acid production. In this study, the metabolically engineered E. coli not only showed improvement of high salt stress tolerance through expression of a global regulator IrrE, but also could use seawater for succinic acid fermentation. The recombinant strain showed an increased 1.20-fold of cell growth rate and 1.24-fold of succinic acid production. Expression levels of genes related glucose uptake and succinic acid synthesis were up-regulated, and more glycerol and trehalose were accumulated. Moreover, no significant differences were observed in cell growth even when tap water was replaced by 60% artificial seawater. In the fermentation using Yellow Sea seawater, 24.5 g/L succinic acid was achieved with a yield of 0.88 g/g. This strategy set up a platform for improving abiotic stress tolerances and provide a possible approach for fermentation processes with low cost.

Multilayer sensing platform: gold nanoparticles/prussian blue decorated graphite paper for NADH and H2O2 detection

An exfoliated graphite paper based multilayer sensing platform was fabricated and applied for sensitive detection of NADH and H₂O₂.