A novel immunosensing platform for highly sensitive prostate specific antigen detection based on dual-quenching of photocurrent from CdSe sensitized TiO2 electrode by gold nanoparticles decorated polydopamine nanospheres

Multipath collaboration-based signal amplification on Z-scheme In2O3/g-C3N4 heterojunction photoelectrode for sensitive photoelectrochemical immunoassay

The ideal photoelectrode and efficient signaling strategy are pivotal to achieve sensitive photoelectrochemical (PEC) analysis. Here, a multipath collaborative signal amplification-based PEC immunosensor was constructed for the ultrasensitive detection of cytokeratin 19 fragment 21-1. Specifically, the photoelectrode fabricated by Z-scheme In2O3/g-C3N4 heterojunction showed enhanced photocurrent intensity in response to visible light. Meanwhile, the signal probe, horseradish peroxidase functionalized dopamine-melanin nanosphere@Au nanoparticles (HRP-Dpa-melanin NS@AuNPs), were introduced into the system. When the target exists, the signal probe can induce multiple quenching of the photocurrent due to the competition of light absorption, steric hindrance and HRP-mediated biocatalytic precipitation, which effectively inhibit light, electron donor, and electron access to the photoelectrode. The fabricated immunosensor exhibits a wide linear range from 1.0 × 10-3 - 1.0 × 102 ng mL-1 with the detection limit of 0.35 pg mL-1 (S/N = 3) for cytokeratin 19 fragment 21-1 detection. The study enhances sensitivity for PEC detection by utilizing the superior Z-scheme heterojunction photoelectrode, providing a valuable method that combines multiple signal pathways for a synergistic effect in bioanalysis.

Ternary BiOI/Bi2S3/Au Nanosheet Arrays as a Photoelectrochemical Signal Converter for the Detection of Cardiac Troponin I

Nanosheet arrays with stable signal output have become promising photoactive materials for photoelectrochemical (PEC) immunosensors. However, an essential concern is the facile recombination of carriers in one-component nanoarrays, which cannot be readily prevented, ultimately resulting in weak photocurrent signals. In this study, an immunosensor using gold nanoparticle-anchored BiOI/Bi2S3 nanosheet arrays (BiOI/Bi2S3/Au) as a signal converter was fabricated for sensitive detection of cardiac troponin I (cTnI). The ternary nanosheet arrays were prepared by a simple method in which Bi2S3 was well-coated on the BiOI surface by in situ growth, whereas the addition of Au further improved the photoelectric conversion efficiency and could link more antibodies. The three-dimensional (3D) ordered sheet-like network array structure and BiOI/Bi2S3/Au ternary nanosheet arrays showed stable and high photoelectric signal output and no significant difference in signals across different batches under visible light excitation. The fabricated immunosensor has a sensitive response to the target detection marker cTnI in a wide linear range of 500 fg/mL to 50 ng/mL, and the detection limit was 32 fg/mL, demonstrating good stability and selectivity. This work not only shows the great application potential of ternary heterojunction arrays in the field of PEC immunosensors but also provides a useful exploration for improving the stability of immunosensors.

Biological redox cycling amplification in a self-powered photoelectrochemical sensor based on TiO2/CdIn2S4/ g-C3N4-WO3 photoanode for sensitive detection of Hg2

A photoelectrochemical (PEC) sensor is proposed with a TiO₂/CdIn₂S₄ co-sensitive structure and a g-C₃N₄-WO₃ heterojunction as the photoanode to form a self-powered system. The photogenerated hole-induced biological redox cycle of TiO₂/CdIn₂S₄/g-C₃N₄-WO₃ composites is used as a signal amplification strategy for Hg²⁺ detection. In the test solution, ascorbic acid is first oxidized by the photogenerated hole of the TiO₂/CdIn₂S₄/g-C₃N₄-WO₃ photoanode, which triggers the ascorbic acid－glutathione cycle to achieve signal amplification and increase the photocurrent. However, in the presence of Hg²⁺, glutathione forms a complex with Hg²⁺, which destroys the biological cycle and leads to a decreased of photocurrent, thus achieving detection of Hg²⁺. Under optimal conditions, the proposed PEC sensor has a wider range (from 0.1 pM to 100 nM), and lower limit of Hg²⁺ detection (0.44 fM) than most other Hg²⁺ detection methods. In addition, the developed PEC sensor can be used to detect of real samples.

Rational design of effective solid-state electrochemiluminescence platform of Gold@Polyluminol nanocomposite as an ultrasensitive immuno-probe for selective detection of prostate specific antigen

An electrodeposited gold@poly-luminol nanocomposite on glassy carbon electrode (Au@PL-NC/GCE) has been developed and demonstrated as solid-state electrochemiluminescence (ECL) immunosensor platform for prostate specific antigen (PSA) sensing. In-situ electro-generated reactive oxygen species (ROS) from oxygen reduction reaction in oxygen saturated PBS (pH 7.4) acts as sole co-reactant augmenting the signal transduction. Protein-G bio-affinity layer interfaced with Au@PL-NC/GCE (Protein-G/Au@PL-NC/GCE) to support the effective localization of Fc region of the monoclonal antibodies of PSA (mAb-PSA). As-developed ECL probe exhibit selective recognition of target analyte, PSA, enabling wide linearity of 1 fg mL^-1 to 10 μg mL^-1 with a calculated limit of detection (LOD) and limit of quantification (LOQ) of 0.45 fg mL^-1 and 1.37 fg mL^-1, respectively. The selectivity and specificity of the ECL probe was tested using human serum albumin, immunoglobulin G and mixtures of the same with target analyte. Fabricated ECL probe not only exhibit high sensitivity and specificity against commercial PSA samples but also enable clinical detection in real human serum and urine samples with acceptable recovery range from 97% to 103%. Our results suggest that the fabricated reagent-less solid-state ECL platform holds promising application in the field of prostate oncological screening and its point-of-care applications.

A Photoelectrochemical Platform Based on Polyaniline-Modified Titanium Dioxide Facet Heterostructure

A photoelectrochemical (PEC) electrode for glucose detection was built based on polyaniline (PANI) modified titanium dioxide heterojunction (FH-TiO₂) structures. Ultrathin titanium dioxide (TiO₂) nanosheets are assembled onto rutile nanorods (TiO₂ NRs). Experiments show that the main exposed faces of these nanosheets are (101) or (111) crystal planes. Proven by theoretical calculation, the bottom of the conduction band (CB) of (111) is 0.15 eV lower than the bottom of the conduction band of (101). Therefore, when the material is excited by light, photogenerated electrons are able to transfer from the conduction band of (101) to the conduction band of (111). PANI was introduced as a medium to effectively conduct photogenerated charges between glucose oxidase and titanium dioxide. A photoelectric detection electrode for glucose was fabricated by loading glucose oxidase onto PANI@FH-TiO₂. This electrode showed excellent performance in 0.2-1.0 mM linear range with a sensitivity 15.63 μA mM^-1 cm^-2 and 1.0-15.0 mM linear range with a sensitivity of 1.42 μA mM^-1 cm^-2.

Highly portable quantitative screening test for prostate-specific antigen at point of care

Prostate cancer (PCa) is the second most diagnosed cancer among men. Targeted PCa screening may decrease PCa-specific mortality. Prostate-specific antigen (PSA) is the most reliable and widely accepted tumor biomarker for screening and monitoring PCa status. However, in many settings, quantification of serum PSA requires access to centralized laboratories. In this study, we describe a proof-of-concept rapid test combined with a highly portable Cube^™ reader for quantification of total PSA from a drop of serum within 20 min. We demonstrated the application of gold nanoshells as a label for lateral flow assay with significant increase in the measured colorimetric signal intensity to achieve five times lower detection limit when compared to the traditionally used 40 nm gold nanosphere labels, without a need for any additional signal amplification steps. We first optimized and evaluated the performance of the assay with commercially available total PSA calibrators. For initial validation with commercially available ACCESS Hybritech PSA calibrator, a detection range of 0.5-150 ng/mL was achieved. We compared the performance of our total PSA test with IMMULITE analyzer for quantification of total PSA in archived human serum samples. On preliminary testing with archived serums samples and comparison with IMMULITE total PSA assay, a correlation of 0.95 (p < .0001) was observed. The highly portable quantitative screening test for PSA described in this study has the potential to make PCa screening more accessible where diagnostic labs and automated immunoassay systems are not available, to reduce therapeutic turnaround time, to streamline clinical care, and to direct patient care for both initial screening and for post-treatment monitoring of patients.

A membraneless self-powered photoelectrochemical biosensor based on Bi2S3/BiPO4 heterojunction photoanode coupling with redox cycling signal amplification strategy

The photoelectrochemical (PEC) self-powered system has attracted great attention in disease detection. The determination of a simple and efficient approach for disease-related biomarkers is highly interesting and appealing. Herein, an ingenious visible light-induced membraneless self-powered PEC biosensing platform was constructed, integrating a signal amplification strategy for ultrasensitive split-type PEC bioanalysis. The system was comprised of a Bi₂S₃/BiPO₄ heterojunction photoanode and a platinum (Pt) cathode in a one compartment chamber. An alkaline phosphatase (ALP)-loaded sandwich immunoassay was used to generate the signal reporter ascorbic acid (AA) in a 96-well plate, and myoglobin (Myo) was used as a model protein. In the presence of AA, ferrocene (Fc), and Tris (2-carboxyethyl) phosphine (TCEP), the chemical-chemical redox cycling scheme was operated upon the initial oxidation of Fc by the holes in the Bi₂S₃/BiPO₄ photoelectrode, and Fc was regenerated from Fc⁺ by AA. Subsequently, AA was regenerated by TCEP after its oxidation, and cycling was triggered. As a result, the proposed self-powered PEC sensing exhibited excellent performance with a wide linear range from 5.0 × 10^-13 to 1.0 × 10^-7 g/mL, and a low detection limit of 2.0 × 10^-13 g/mL for Myo. This work provided a new design of a redox cycling strategy in the self-powered PEC biosensor, and showed an effective approach for the clinical diagnosis.

Photogenerated Hole-Induced Chemical-Chemical Redox Cycling Strategy on a Direct Z-Scheme Bi2S3/Bi2MoO6 Heterostructure Photoelectrode: Toward an Ultrasensitive Photoelectrochemical Immunoassay

To achieve high sensitivity for biomolecule detection in photoelectrochemical (PEC) bioanalysis, the ideal photoelectrode and ingenious signaling mechanism play crucial roles. Herein, the feasibility of the photogenerated hole-induced chemical-chemical redox cycling amplification strategy on a Z-scheme heterostructure photoelectrode was validated, and the strategy toward enhanced multiple signal amplification for advanced PEC immunoassay application was developed. Specifically, a direct Z-scheme Bi₂S₃/Bi₂MoO₆ heterostructure was synthesized via a classic hydrothermal method and served as a photoelectrode for the signal response. Under the illumination, the PEC chemical-chemical redox cycling (PECCC) among 4-aminophenol generated by the enzymatic catalysis from a sandwich immunoassay, ferrocene as a mediator, and tris (2-carboxyethyl) phosphine as a reducing agent was run on the Z-scheme Bi₂S₃/Bi₂MoO₆ heterostructure photoelectrode. Exemplified by interleukin-6 (IL-6) as the target, the applicability of the strategy was studied in a PEC immunoassay. Thanks to the multiple signal amplification originating from the high efficiency of the PECCC redox cycling system, the enzymatic amplification, and the fine performance of the Z-scheme Bi₂S₃/Bi₂MoO₆ heterostructure photoelectrode, the assay for IL-6 exhibits a very low detection limit of 2.0 × 10^-14 g/mL with a linear range from 5.0 × 10^-14 to 1.0 × 10^-8 g/mL. This work first validates the feasibility of the PECCC redox cycling on the Z-scheme heterostructure photoelectrode and the good performance of the strategy in PEC bioanalysis. We envision that it would provide a new prospective for highly sensitive PEC bioanalysis on the basis of a Z-scheme heterostructure.

Metal Nanoparticle and Quantum Dot Tags for Signal Amplification in Electrochemical Immunosensors for Biomarker Detection

With the increasing importance of healthcare and clinical diagnosis, as well as the growing demand for highly sensitive analytical instruments, immunosensors have received considerable attention. In this review, electrochemical immunosensor signal amplification strategies using metal nanoparticles (MNPs) and quantum dots (Qdots) as tags are overviewed, focusing on recent developments in the ultrasensitive detection of biomarkers. MNPs and Qdots can be used separately or in combination with other nanostructures, while performing the function of nanocarriers, electroactive labels, or catalysts. Thus, different functions of MNPs and Qdots as well as recent advances in electrochemical signal amplification are discussed. Additionally, the methods most often used for antibody immobilization on nanoparticles, immunoassay formats, and electrochemical methods for indirect biomarker detection are overviewed.

Application of electrochemical methods for the detection of abiotic stress biomarkers in plants

Abiotic stress is the main cause of low productivity in plants. Therefore, it is important to detect stress and respond to it in a timely manner to avoid irreversible damage to plant productivity and health. The application of traditional methods in agriculture is limited by expensive equipment and cumbersome sample processing. More effective detection methods are urgently needed due to the trace amounts and low stabilities of plant biomarkers. Electrochemical detection methods have the unique advantages of high accuracy, a low detection limit, fast response and easy integration with systems. In this review, the application of three types of electrochemical methods to phytohormone assessment is highlighted including direct electrochemical, immunoelectrochemical, and photoelectrochemical methods. Research on electrochemical methods for detecting abiotic stress biomarkers, including various phytohormones, is also summarized with examples. To date, the detection limit of exogenous plant hormones can reach pg/mL or even lower. Nevertheless, more efforts need to be made to develop a portable instrument for in situ online detection if electrochemical sensors are to be applied to the detection of the endogenous hormones or the physiological state of plants. Additionally, plant-wearable sensors that can be directly attached to or implanted into plants for continuous, noninvasive and real-time monitoring are emphasized. Finally, rational summaries of the considered methods and present challenges and future prospects in the field of abiotic stress detection-based electrochemical biosensors are thoroughly discussed.

Photoelectrochemical aptasensor for thrombin based on Au-rGO-CuS as signal amplification elements

A photoelectrochemical platform for thrombin determination was developed based on Au-rGO-CuS as multiple signal amplification elements. CuInS₂ QDs was used to sensitize burr-shape TiO₂ (b-TiO₂) to obtain a strong photocurrent. Under the specific recognition between aptamer and thrombin, a sandwichlike structure was formed and the Au-rGO-CuS-labeled aptamer (S2@Au-rGO-CuS) was immobilized on the electrode surface. This induced a sharp decrease in photocurrent. The phenomenon is mainly due to the fact that CuS NPs can competitively consume the light energy and electron donor with CuInS₂/b-TiO₂. The rGO can increase the amount of CuS NPs and the Au NPs can accelerate charge transferring which depress the recombination of photogenerated electrons and holes in CuS to further enhance the competitive capacity of CuS. The sandwichlike structure has a steric hindrance effect. Therefore, the S2@Au-rGO-CuS has a multiple signal amplification function for thrombin determination. Under optimal conditions, the PEC aptasensor exhibited a wide linear concentration range from 0.1 pM to 10 nM with a low detection limit of 30 fM (S/N = 3) for thrombin. Besides, the designed aptasensor performed well in the assay of human serum sample, indicating good potential for the determination of thrombin in real samples. Graphical abstract.

Advances in prostate specific antigen biosensors-impact of nanotechnology

Prostate cancer is one of the most dangerous and deadly cancers in elderly men. Early diagnosis using prostate-specific antigen (PSA) facilitates disease detection, management and treatment. Biosensors have recently been used as sensitive, selective, inexpensive and rapid diagnostic tools for PSA detection. In this review, a variety of PSA biosensors such as aptasensors, peptisensors and immunesensors are highlighted. These use aptamers, peptides and antibodies in the biorecognition element, respectively, and can detect PSA with very high sensitivity via electrochemical, electrochemiluminescence, fluorescence and surface-enhanced Raman spectroscopy. To improve the sensitivity of most of these PSA biosensors, different nanostructured materials have played a critical role.

A potentiometric resolved photoelectrochemical system based on CdS nanowires and SnNb2O6 nanosheets: a case application for dual biomarker analysis

A potentiometric-resolved PEC immunosensor was developed for dual-target detection.

A surface-enhanced electrochemiluminescence sensor based on Au-SiO2 core–shell nanocomposites doped with Ru(bpy)32+ for the ultrasensitive detection of prostate-specific antigen in human serum

This study reports a surface-enhanced electrochemiluminescence (SEECL) sensor for the ultrasensitive detection of prostate-specific antigen (PSA) in human serum.

A homogeneous photoelectrochemical hydrogen sulfide sensor based on the electronic transfer mediated by tetrasulfophthalocyanine

A homogeneous photoelectrochemical sensor for H₂S detection based on the electronic transfer mediated by [Fe(iii)PcS₄]⁺was developed with an un-modified photoelectrode.

Peptide-conjugated hemin/G-quadruplex as a versatile probe for "signal-on" electrochemical peptide biosensor

In this work, a novel "signal-on" electrochemical peptide biosensor based on peptide-conjugated hemin/G-quadruplex (DNAzyme-peptide) hybrid and rosebud-like MoSe₂@reduced graphene oxide (MoSe₂@rGO) nanocomposite, was developed for detection of prostate-specific antigen (PSA). Interestingly, the peptide not only served as recognition probe to detect PSA, but also acted as the enhancer to improve the enzyme activity of hemin/G4, which promoted the detection sensitivity. Up addition of PSA, Fe₃O₄-labeled DNAzyme-peptide probe was cleaved, followed by the magnetic separation. The cleaved DNAzyme-peptide was then captured onto the cysteine-modified electrode via the interaction between carboxyl groups of peptide and amino group of cysteine. A strong electrochemical signal was obtained from hemin and further was amplified by the enhanced electrocatalysis of DNAzyme-peptide. Compared to the original DNAzyme, DNAzyme-peptide exhibited more than 3-fold enhancement in signal amplification. And MoSe₂@rGO amplified the electrochemical signal due to its good conductivity and large surface area. So the proposed strategy detected PSA down to 0.3 fg/mL, and it showed the advantages of simplicity, low cost by avoiding the use of expensive protein enzyme and additional electroactive species. Therefore, the proposed biosensor potentially provided a very effective tool for early diagnosis of cancer by the detection of PSA.

Dual-mode visible light-induced aptasensing platforms for bleomycin detection based on CdS-In2S3 heterojunction

CdS-In₂S₃ heterojunction with enhanced photoelectrochemical (PEC) performance was synthesized to construct dual-mode visible light-induced biosensors for highly sensitive and selective detection of bleomycin (BLM). Due to improved absorption in the visible region and suppressed recombination of electron-hole pairs in the heterojunction, CdS-In₂S₃ composite exhibited enhanced photocurrent response under visible light illumination. Using CdS-In₂S₃ as photoactive materials and BLM-binding aptamer as recognition element, a PEC aptasensor displaying a declined photocurrent response to BLM was facilely constructed, which was linear to BLM concentration in the range of 5.0-250 nM. On the other hand, the CdS-In₂S₃ photoanode was employed to construct a photofuel cell (PFC). In such a PFC, the oxidation of water on CdS-In₂S₃ photoanode under visible light illumination and the reduction of oxygen on Pt cathode led to the generation of electricity. When BLM-binding aptamer was immobilized on CdS-In₂S₃ photoanode, the output power of the PFC was inversely proportional to the logarithm of BLM concentration from 10 to 250 nM, offering a visible light-induced self-powered sensing platform for BLM detection. Both of the proposed sensors showed high selectivity, good reproducibility and high stability. They were successfully applied to the determination of BLM in human serum samples.

A visible light photoelectrochemical sandwich aptasensor for adenosine triphosphate based on MgIn2S4-TiO2 nanoarray heterojunction

This work designed a MgIn₂S₄-TiONA heterojunction by growing MgIn₂S₄ nanoplates on TiO₂ nanowire array (TiONA) for preparation of visible light photoelectrochemical (PEC) sensing platform. The heterojunction exhibited strong absorption of visible light, large surface area and high loading of biomolecules, leading to high sensing sensitivity. Using adenosine triphosphate (ATP), a marker of cell vitality, as the target model, a PEC sandwich aptasensor was constructed by immobilizing capture DNA₁ on MgIn₂S₄ surface. In the presence of ATP and signal DNA₂ with terminal ferrocene as the electron donor, a sandwiched DNA₁-ATP-DNA₂ complex could be formed on the PEC aptasensor. The aptasensor showed excellent performance with a wide linear range from 50 fM to 100 nM and a detection limit of 20 fM. The sensing performance including specificity, reproducibility, stability and practical use were also evaluated, showing promising application of the MgIn₂S₄-TiONA heterojunction in PEC biosensing.

Photoelectrochemical biosensor for CEA detection based on SnS2-GR with multiple quenching effects of Au@CuS-GR

A novel signal on-off type photoelectrochemical (PEC) biosensing system was designed for sensitive detection of carcinoembryonic antigen (CEA) based on tin disulfide nanosheets loaded on reduced graphene cxide (SnS₂-GR) as the photoactive material and gold nanoparticles coated on reduced graphene oxide-functionalized copper sulfide (Au@CuS-GR) for signal amplification. It's the first time for SnS₂-GR was exploited as a sensing matrix. Here, the photocurrent signals of SnS₂ were amplified attributed to the sensitization effect of graphene. As signal amplifier, Au@CuS-GR could quench the photocurrents of SnS₂-GR not only through the p-n type semiconductor quenching effect as well as the steric hindrance effect, but also as peroxidase mimetics to catalyze the oxidation of 4-Chloro-1-naphthol (4-CN) to produce insoluble product on the electrode surface. Based on the multiple signal amplification ability of Au@CuS-GR, CEA was detected sensitively with a linear range from 0.1 pg mL^-1 to 10 ng mL^-1 and limit of detection down to 59.9 fg mL^-1 (S/N = 3). Meanwhile, the PEC biosensor displayed excellent performance in the assay of human serum sample, showing good application prospects for various target analysis.

Plasma functional polymerization of dopamine using atmospheric pressure plasma and a dopamine solution mist

By using DBD-type atmospheric pressure plasmas and a dopamine solution mist formed by a piezoelectric module, the possibility of depositing functional polymer films showing the physical and chemical characteristics of polydopamine without breaking the functional group of the dopamine has been investigated for different plasma voltages. The higher DBD voltages up to 3.0 kV decreased the functional groups such as catechol and amine (N/C ratio) relative to dopamine in the deposited polymer by increasing the dissociation of dopamine into atoms and small molecules due to higher electron energies. In contrast, the lower DBD voltages up to 1.5 kV increased the functional group and N/C ratio of dopamine in the deposited polymer by keeping the molecular structures of the dopamine due to lower electron energies. Therefore, the polymer deposited at the lower DBD voltages showed lower contact angles and higher metal absorption properties which are some of the surface modification characteristics of polydopamine. When the metal absorption properties of the polydopamine-like film deposited using the atmospheric pressure plasma of a low DBD voltage with a dopamine solution mist were compared with other metal absorbers for Cu, As, and Cr, the polydopamine-like film exhibited superior metal absorption properties. It is believed that this atmospheric pressure plasma process can be also applied to the plasma polymerization of other monomers without breaking the functional groups of the monomers.

Detection of prostate specific antigen (PSA) in human saliva using an ultra-sensitive nanocomposite of graphene nanoplatelets with diblock-co-polymers and Au electrodes

Prostate-specific antigen (PSA) is a commonly used biomarker for the detection of prostate cancer (PCa) and there are numerous data available for its invasive detection in the serum and whole blood. In this work, an electrochemical sensing method was devised to detect traces of PSA in human saliva using a hybrid nanocomposite of graphene nanoplatelets with diblock co-polymers and Au electrodes (GRP-PS₆₇-b-PAA₂₇-Au). The pure graphitic composition on filter paper provides significantly high electrical and thermal conductivity while PS₆₇-b-PAA₂₇ makes an amphiphilic bridge between GRP units. The sensor utilizes the binding of an anti-PSA antibody with an antigen-PSA to act as a resistor in a circuit providing an impedance change that in turn allows for the detection and quantification of PSA in saliva samples. A miniaturized electrical impedance analyzer was interfaced with a sensor chip and the data were recorded in real-time using a Bluetooth-enabled module. This fully integrated and optimized sensing device exhibited a wide PSA range of detection from 0.1 pg mL^-1 to 100 ng mL^-1 (R² = 0.963) with a lower limit of detection of 40 fg mL^-1. The performance of the biosensor chip was validated with an enzyme-linked immunosorbent assay technique with a regression coefficient as high as 0.940. The advantages of the newly developed saliva-PSA electrical biosensor over previously reported serum-PSA electrochemical biosensors include a faster response time (3-5 min) to achieve a stable electrical signal for PSA detection, high selectivity, improved sensitivity, no additional requirement of a redox electrolyte for electron exchange and excellent shelf life. The presented sensor is aimed for clinical commercialization to detect PSA in human saliva.

An acid-responsive all-in-one signal amplification strategy for the ultrasensitive prostate-specific antigen detection

A one-pot strategy for the preparation of all-in-one signal tags for the colorimetric immunoassay of prostate-specific antigen.

Gold/WS2 nanocomposites fabricated by in-situ ultrasonication and assembling for photoelectrochemical immunosensing of carcinoembryonic antigen

Tungsten disulfide (WS₂) nanosheets were obtained by exfoliating WS₂ bulk crystals in N-methylpyrrolidone by ultrasonication. Gold nanoparticles (GNPs) were synthesized by in-situ ultrasonication of sodium citrate and HAuCl₄ while fabricating the WS₂ nanosheets. In this way, the GNPs were self-assembled on WS₂ nanosheets to form a GNPs/WS₂ nanocomposite through interaction between sulfur and gold atoms. The photoelectrochemical response of WS₂ nanosheets is significantly enhanced after integration of the GNPs. The GNPs/WS₂ nanocomposite was coated onto a glassy carbon electrode (GCE) to construct a sensing interface which then was modified with an antibody against the carcinoembryonic antigen (CEA) to obtain a photoelectrochemical immunosensor for CEA. Under optimized conditions, the decline in relative photocurrent is linearly related to the logarithm of the CEA concentration in the range from 0.001 to 40 ng mL^-1. The detection limit is 0.5 pg mL^-1 (at S/N = 3). The assay is sensitive, selective, stable and reproducible. It was applied to the determination of CEA in clinical serum samples. Graphical abstract Schematic presentation of the fabrication of Au/WS₂ nanocomposites by in-situ ultrasonication and the procedure for the CEA photoelectrochemical immunosensor preparation, and the photocurrent response towards the carcinoembryonic antigen.

One-Pot Synthesis of N-Graphene Quantum Dot-Functionalized I-BiOCl Z-Scheme Cathodic Materials for "Signal-Off" Photoelectrochemical Sensing of Chlorpyrifos

A Z-scheme I-BiOCl/N-GQD (i.e., nitrogen-doped graphene quantum dot) heterojunction was prepared by a one-pot precipitation method at room temperature. The doped iodine decreased the band gap of BiOCl, the introduced N-GQDs enhanced light harvesting and prolonged the photogenerated electron lifetime, and the resultant Z-scheme heterojunction promoted the spatial separation of interfacial charges. Thus, the composite showed high photoelectrochemical activity and a big cathodic photocurrent signal. On the basis of the coordination of chlorpyrifos with surface Bi(III) of the composite, a cathodic photoelectrochemical sensor was constructed for the selective detection of chlorpyrifos. In this case, chlorpyrifos decreased the lifetime of photogenerated electrons, so the photocurrent became small. Furthermore, the photocurrent changed and the logarithm of chlorpyrifos concentration presented a linear relationship. The linear range was 0.3-80 ng mL^-1, and the limit of detection was estimated to be 0.01 ng mL^-1 (defined as S/N = 3). The present strategy can also be used for the design and fabrication of other PEC sensors suitable for different analytes.

Recent uses of carbon nanotubes & gold nanoparticles in electrochemistry with application in biosensing: A review

The innovation of nanoparticles assumes a critical part of encouraging and giving open doors and conceivable outcomes to the headway of new era devices utilized as a part of biosensing. The focused on the quick and legitimate detecting of specific biomolecules using functionalized gold nanoparticles (Au NPs), and carbon nanotubes (CNTs) has turned into a noteworthy research enthusiasm for the most recent decade. Sensors created with gold nanoparticles or carbon nanotubes or in some cases by utilizing both are relied upon to change the very establishments of detecting and distinguishing various analytes. In this review, we will examine the current utilization of functionalized AuNPs and CNTs with other synthetic mixes for the creation of biosensor prompting to the location of particular analytes with low discovery cutoff and quick reaction.

Photogenerated Hole-Induced Chemical Redox Cycling on Bi2S3/Bi2Sn2O7 Heterojunction: Toward General Amplified Split-Type Photoelectrochemical Immunoassay

This work reports the elegant bridging of enzymatic generation of electron donor with photogenerated hole-induced chemical redox cycling amplification (RCA) for innovative photoelectrochemical (PEC) immunoassay, by the aid of a heterojunction photoelectrode with split-type strategy. Specifically, the system was exemplified by the alkaline phosphatase (ALP) catalytic generation of ascorbic acid (AA), the redox cycling of AA by tris (2-carboxyethyl) phosphine (TCEP) as reductant, and the use of a novel Bi₂S₃/Bi₂Sn₂O₇ heterojunction and myoglobin (Myo) as the photoelectrode and the target, respectively. After the immunoreaction and ALP-induced production of AA, the subsequent oxidation of AA by the photogenerated holes of the Bi₂S₃/Bi₂Sn₂O₇ heterojunction could be cycled via the regeneration of AA by TCEP from the oxidized product of dehydroascorbic acid, leading to easy signal amplification for the sensitive immunoassay of Myo in real samples. It is believed that this work provided a basis for further design and development of general RCA-based PEC immunoassays.

A photoelectrochemical immunosensor based on gold nanoparticles/ZnAgInS quaternary quantum dots for the high-performance determination of hepatitis B virus surface antigen

ZnAgInS quaternary quantum dots were prepared using glutathione as the capped reagent. Gold nanoparticles (GNPs) were integrated with ZnAgInS QDs to provide a GNPs/ZnAgInS QDs nanocomposite. The morphological image, component and crystal structure of GNPs/ZnAgInS QDs were characterized by transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS) and X-ray diffraction (XRD). A glassy carbon electrode surface was coated with GNPs/ZnAgInS QDs nanocomposites to construct an interface for immobilizing the antibody of hepatitis B virus surface antigen (anti-HBsAg). By employing GNPs/ZnAgInS QDs as a photoactive element, a photoelectrochemical immunosensor for hepatitis B virus surface antigen (HBsAg) was developed. The results indicate that gold nanoparticles can dramatically enhance the photocurrent response of ZnAgInS QDs and thus improving the sensing performances of the immunosensor. The experimental conditions including incubation time, incubation temperature, and ascorbic acid concentration were optimized. The relative photocurrent decline [R_i = ΔI/I₀= (I₀ - I)/I₀] shows a linear relationship to the logarithm of HBsAg concentration [lg(c, ng mL^-1)] in the range from 0.005 to 30 ng mL^-1. A detection limit of 0.5 pg mL^-1 was obtained. The immunosensor shows excellent sensitivity, selectivity, stability and reproducibility. The HBsAg concentrations in clinical serum samples were also accurately determined with this new photoelectrochemical immunosensor.