Dual lanthanide-doped complexes: the development of a time-resolved ratiometric fluorescent probe for anthrax biomarker and a paper-based visual sensor

A Benzothiadiazole-Based Zn(II) Metal-Organic Framework with Visual Turn-On Sensing for Anthrax Biomarker and Theoretical Calculation

2,6-pyridine dicarboxylic acid (DPA) is an exceptional biomarker of notorious anthrax spores. Therefore, the rapid, sensitive, and selective quantitative detection of DPA is extremely significant and urgent. This paper reports a Zn(II) metal-organic framework with the formula of {[Zn6(NDA)6(DPBT)3] 2H2O·3DMF}n (MOF-1), which consists of 2,6-naphthalenedicarboxylic acid (2,6-NDA), 4,7-di(4-pyridyl)-2,1,3-benzothiadiazole (DPBT), and Zn(II) ions. Structural analysis indicated that MOF-1 is a three-dimensional (3D) network which crystallized in the monoclinic system with the C2/c space group, revealing high pH, solvent, and thermal stability. Luminescence sensing studies demonstrated that MOF-1 had the potential to be a highly selective, sensitive, and recyclable fluorescence sensor for the identification of DPA. Furthermore, fluorescent test paper was made to detect DPA promptly with color changes. The enhancement mechanism was established by the hydrogen-bonding interaction and photoinduced electron transfer transition between MOF-1 and DPA molecules.

Spatial confinement of styryl pyridine salt derivative in MCM-22 molecular sieve network for boosted fluorescence emission and stable ratiometric sensing of bacillus anthracis biomarkers

In this work, a stable ratiometric nanofluorescent probe for the detection of 2,6-dipicolinic acid (DPA), a Bacillus anthracis biomarker, was developed based on confinement-induced emission enhancement of cationic styrylpyridine salt derivative L in MCM-22 molecular sieve pores. The cationic L and the lanthanide Tb3+ were loaded into the pores of the molecular sieve by electrostatic interaction with the negatively charged AlO4 tetrahedron unit, and L exhibited enhanced red fluorescence emission as a stable fluorescence reference mark in the nanoprobe platform due to the restricted molecular torsion of L in the pores of MCM-22. At the same time, the characteristic green fluorescence emission of Tb3+ can be excited by energy transfer due to the "antenna effect" of DPA. The prepared Tb-L@MCM-22 nanoprobe showed specific selectivity and stable fluorescence ratiometric detection of DPA in tap water, lake water, bovine serum and actual bacterial spores. Benefiting from the confinement-induced fluorescence enhancement effect of L in the MCM-22 molecular sieve pores, the obtained Tb-L@MCM-22 can provide a stable reference signal for the fluorescence ratiometric detection of DPA with a limit of detection (LOD) of 78.6 nM and 1.310 × 104 spores per mL. More importantly, combining of the Tb-L@MCM-22 based DPA detection test strips with a smartphone app demonstrated a stable, convenient and rapid method for detecting of anthrax biomarkers.

Small Molecule Optical Probes for Detection of H2S in Water Samples: A Review

Hydrogen sulfide (H2S) is closely linked to not only environmental hazards, but also it affects human health due to its toxic nature and the exposure risks associated with several occupational settings. Therefore, detection of this pollutant in water sources has garnered immense importance in the analytical research arena. Several research groups have devoted great efforts to explore the selective as well as sensitive methods to detect H2S concentrations in water. Recent studies describe different strategies for sensing this ubiquitous gas in real-life water samples. Though many of the designed and developed H2S detection approaches based on the use of organic small molecules facilitate qualitative/quantitative detection of the toxic contaminant in water, optical detection has been acknowledged as one of the best, attributed to the simple, highly sensitive, selective, and good repeatability features of the technique. Therefore, this review is an attempt to offer a general perspective of easy-to-use and fast response optical detection techniques for H2S, fluorimetry and colorimetry, over a wide variety of other instrumental platforms. The review affords a concise summary of the various design strategies adopted by various researchers in constructing small organic molecules as H2S sensors and offers insight into their mechanistic pathways. Moreover, it collates the salient aspects of optical detection techniques and highlights the future scope for prospective exploration in this field based on the limitations of the existing H2S probes.

Development of fluorescent GO-AgNPs-Eu3+ nanoparticles based paper visual sensor for foodborne spores detection

Foodborne spores are ubiquitous with extremely strong resistance, and pose a serious threat to food safety and human health. Therefore, rapid, sensitive, and selective detection of spores are crucial. In this study, a fluorescent probe was developed based on lanthanide ion (Eu3+)-labeled nano-silver-modified graphene oxide (GO-AgNPs-Eu3+) for the detection of 2,6-dipicolinic acid (DPA), a biomarker unique to spores, to allow quantitative spores detection. The GO-AgNPs-Eu3+ nano-fluorescent probe was loaded onto a polyvinylidene fluoride microfiltration membrane, and a smartphone-assisted portable GO-AgNPs-Eu3+ nanoparticles-based paper visual sensor was designed for rapid on-site quantitative and real-time online detection of spores. The results indicated that the developed probe achieved equilibrium binding with DPA within 5 min, and enhanced fluorescence emission through antenna effect. The fluorescence detection presented a good linear relationship in the DPA concentration range of 0-45 μM, with a DPA detection limit of 4.62 nM and spore detection limit of 104 cfu/mL. The developed sensor showed a change in fluorescence from blue to red with increasing DPA concentration, and this color change was quantitatively detected through smartphone RGB variations, with a detection limit of 13.1 μM for DPA and 6.3 cfu/mL for Bacillus subtilis spores. Subsequently, the sensitivity and selectivity of the developed sensor were verified using actual milk and water samples spiked with B. subtilis spores. The results of this study provided objective technological support for rapid detection of spores, which is important for reducing the occurrence of foodborne diseases and improving food safety.

Label-free competitive time-resolved fluorescent aptasensor for the detection of Pb2+ using ssDNA-sensitized fluorescence of Tb3+ ions

Lead (Pb2+) is one of the most toxic heavy metals, and its environmental pollution and serious damages is a global concern. Therefore, it is necessary to develop effective sensing methods. This study describes a new strategy for the design of label-free competitive time-resolved fluorescent (TRF) aptasensor for detecting Pb2+ ions. The sensing principle of this aptasensor is the competition between Pb2+ and Tb3+ ions to bind to the guanine/thymine-rich sequence (lead aptamer) and the sensitized luminescence of Tb3+ by this sequence. The developed TRF aptasensor demonstrated a good linear detection range from 2.5 nM to 150 nM and a limit of detection (LOD) of 645 pM. In addition, the proposed TRF aptasensor has a high selectivity towards Pb2+, and it has also been successfully utilized to detect this ion in milk and human serum samples. This TRF aptasensor offers advantages such as short analysis time, simple operation, low cost, being label-free, and surpassing the interference of background fluorescence of biological samples due to its TRF characteristic. In this paper, we propose a Tb3+/guanine/thymine-rich sequence system for designing different aptasensors against diverse targets by applying a proper guanine-rich sequence.

Double-emitting lanthanide metal-organic frameworks composed of Eu/Tb doping and ratiometric fluorescence detection of nitrofurazone

Lanthanide metal-organic frameworks (LnMOFs) have substantial potential in luminescence due to their unique antenna effect. Nevertheless, the single emission is susceptible to pseudo-signals caused by external environmental conditions, which significantly threaten the accurate measurement of the concentration. In this case, we prepared a dual-emission fluorescent probe {EuxTb1-x(NH2-BDC)3(DMF)4·2DMF}∞ (NH2-BDC = Diaminoterephthalic acid, DMF = N,N-dimethylformamide). The stable dual-emission signal provides a superior signal output for detecting nitrofurazone (NFZ), which is detected by the probe with excellent fluorescence for 0-10 μM NFZ. In the investigation of the detection mechanism, it is speculated that NFZ incorporates with probe to generate a novel complex. Furthermore, The UV absorption curves of the novel complexes and NFZ overlap extensively with those of the probe. The addition of NFZ attenuates the characteristic luminescence of Eu and Tb by competing for the absorption of the excitation light of the probe. The probe has exhibits rapid response, excellent sensitivity, visual detection and a meagre detection limit (LOD = 0.013 μM) for the detection of NFZ. This work not only broadens the application of LnMOFs in the field of ratiometric detection but also provides a favorable fluorescent probe for the quantitative detection of NFZ.

A time-resolved fluorescence microsphere-lateral flow immunochromatographic strip for quantitative detection of Pregnanediol-3-glucuronide in urine samples

Introduction: Pregnanediol-3-glucuronide (PdG), as the main metabolite of progesterone in urine, plays a significant role in the prediction of ovulation, threatened abortion, and menstrual cycle maintenance. Methods: To achieve a rapid and sensitive assay, we have designed a competitive model-based time-resolved fluorescence microsphere-lateral flow immunochromatography (TRFM-LFIA) strip. Results: The optimized TRFM-LFIA strip exhibited a wonderful response to PdG over the range of 30-2,000 ng/mL, the corresponding limit of detection (LOD) was calculated as low as 8.39 ng/mL. More importantly, the TRFM-LFIA strip was innovatively used for the quantitative detection of PdG in urine sample, and excellent recovery results were also obtained, ranging from 97.39% to 112.64%. Discussion: The TRFMLFIA strip possessed robust sensitivity and selectivity in the determination of PdG, indicating the great potential of being powerful tools in the biomedical and diagnosis region.

Emerging Microfluidic Tools for Simultaneous Exosomes and Cargo Biosensing in Liquid Biopsy: New Integrated Miniaturized FFF-Assisted Approach for Colon Cancer Diagnosis

The early-stage diagnosis of cancer is a crucial clinical need. The inadequacies of surgery tissue biopsy have prompted a transition to a less invasive profiling of molecular biomarkers from biofluids, known as liquid biopsy. Exosomes are phospholipid bilayer vesicles present in many biofluids with a biologically active cargo, being responsible for cell-to-cell communication in biological systems. An increase in their excretion and changes in their cargo are potential diagnostic biomarkers for an array of diseases, including cancer, and they constitute a promising analyte for liquid biopsy. The number of exosomes released, the morphological properties, the membrane composition, and their content are highly related to the physiological and pathological states. The main analytical challenge to establishing liquid biopsy in clinical practice is the development of biosensors able to detect intact exosomes concentration and simultaneously analyze specific membrane biomarkers and those contained in their cargo. Before analysis, exosomes also need to be isolated from biological fluids. Microfluidic systems can address several issues present in conventional methods (i.e., ultracentrifugation, size-exclusion chromatography, ultrafiltration, and immunoaffinity capture), which are time-consuming and require a relatively high amount of sample; in addition, they can be easily integrated with biosensing systems. A critical review of emerging microfluidic-based devices for integrated biosensing approaches and following the major analytical need for accurate diagnostics is presented here. The design of a new miniaturized biosensing system is also reported. A device based on hollow-fiber flow field-flow fractionation followed by luminescence-based immunoassay is applied to isolate intact exosomes and characterize their cargo as a proof of concept for colon cancer diagnosis.

Time-resolved Fluorescence DNA-based Sensors for Reducing Background Fluorescence of Environment

The fluorescence assay is one of the popular methods that is applied for detection of different targets. However, this method may show low sensitivity and high background in biological samples due to the natural fluorescence of different compounds in complicated samples. In addition, it inevitably affects the detection results accuracy. A fundamental solution to this problem is the use of the time-resolved fluorescence technique (TRF). The main component of this technique is the use of long fluorescence lifetime reagents. In this review, various time-resolved fluorescent reagents such as complexes of lanthanide ions, lanthanide-doped inorganic nanoparticles; Mn-doped ZnS quantum dots (QDs) and pyrene excimer are introduced. Moreover, TRF sensors, especially TRF aptasensors (DNA-based sensors) are discussed. This review will give new ideas for researchers to develop novel high-sensitive TRF sensors that can remove or decrease background fluorescence and use them for the detection of various targets in complicated samples without treatment.

The Detection of Anthrax Biomarker DPA by Ratiometric Fluorescence Probe of Carbon Quantum Dots and Europium Hybrid Material Based on Poly(ionic)- Liquid

Bacillus anthracis has gained international attention as a deadly bacterium and a potentially deadly biological warfare agent. Dipicolinic acid (DPA) is the main component of the protective layer of anthracis spores, and is also an anthrax biomarker. Therefore, it is of great significance to explore an efficient and sensitive DPA detection method. Herein, a novel ratio hybrid probe (CQDs-PIL-Eu3+) was prepared by a simple one-step hydrothermal method using carbon quantum dots (CQDs) as an internal reference fluorescence and a covalent bond between CQDs and Eu3+ by using a polyionic liquid (PIL) as a bridge molecule. The ratiometric fluorescence probe was found to have the characteristics of sensitive fluorescence visual sensing in detecting DPA. The structure and the sensing properties of CQDs-PIL-Eu3+ were investigated in detail. In particular, the fluorescence intensity ratio of Eu3+ to CQDs (I616/I440) was linear with the concentration of DPA in the range of 0-50 μM, so the detection limit of the probe was as low as 32 nm, which was far lower than the DPA dose released by the number of anthrax spores in human body (60 μM) and, thus, can achieve sensitive detection. Therefore, the ratiometric fluorescence probe in this work has the characteristics of strong anti-interference, visual sensing, and high sensitivity, which provides a very promising scheme for the realization of anthrax biomarker DPA detection.

A simple synthesis method of microsphere immunochromatographic test strip for time-resolved luminescence detection of folic acid

Folic acid (FA) is an ingredient that must be added to infant milk powder to avoid potential defects. Rapid, sensitive and reliable detection methods are needed to determined FA addition levels. Thus, this study established a microsphere immunochromatographic test strip for time-resolved luminescence detection (TRLM-ICTS) based on carboxyl-functionalized time-resolved luminescent microspheres (Eu-TRLMs) prepared by a one-step method as fluorescent markers for the immediate quantitative detection of FA in milk powder. Eu-TRLMs prepared by the one-step method showed good dispersion, high stability and strong fluorescence intensity, which is improving the sensitivity of TRLM-ICTS. In the performance evaluation of TRLM-ICTS, the detection limit was 0.487 ng mL^-1, the recovery rate was 97.3-105 %, and the actual sample detection results were in line with those of UPLC-MS/MS. TRLM-ICTS has the advantages of rapid, high sensitivity and strong specificity and could as a practical quantitative detection method for the detection of FA in milk powder.

Fluorescence on and off sensing platform based on europium nanosheets for the detection of DPA and Cu2+ ions

With the development of society, the modern environment has put forward higher requirements for analysis and detection. This work proposes a new strategy for the construction of fluorescent sensors based on rare-earth nanosheets. Organic/inorganic composites were obtained by the intercalation of 4,4'-stilbene dicarboxylic acid (SDC) into layered europium hydroxide, and then the composites were exfoliated to form nanosheets. Taking advantage of the fluorescence emission characteristics of SDC and Eu³⁺, a ratiometric fluorescent nanoprobe was constructed, which realized the detection of dipicolinic acid (DPA) and Cu²⁺ in the same system. With the addition of DPA, the blue emission of SDC gradually decreased and the red emission of Eu³⁺ gradually increased, when Cu²⁺ was added, the emission of SDC and Eu³⁺ were gradually weakened. The experimental results showed that the ratio of fluorescence emission intensity (I₆₁₉/I₃₉₄) of the probe had a positive linear relationship with the concentration of DPA, and a negative linear relationship with the concentration of Cu²⁺, thus realizing the high sensitivity detection of DPA and a wide detection range of Cu²⁺. In addition, this sensor also exhibits potential visual detection possibilities. This is a multifunctional fluorescent probe that provides a novel and efficient method for the detection of DPA and Cu²⁺, which broadens the application field of rare-earth nanosheets.

Xylenol orange-modified CdTe quantum dots as a fluorescent/colorimetric dual-modal probe for anthrax biomarker based on competitive coordination

Bacillus anthracis spores can make humans infected with vicious anthrax, so it is significant to detect their biomarker 2,6-pyridinedicarboxylic acid (DPA). The development of dual-modal methods for DPA detection that are more flexible in practical applications remains a challenge. Herein, colorimetric xylenol orange (XO) was modified on fluorescent CdTe quantum dots (QDs) for dual-modal detection of DPA through competitive coordination. After the binding of XO on CdTe QDs via coordination with Cd²⁺, CdTe QDs displayed quenched red fluorescence and the bound XO was presented as red color. The competitive coordination of DPA with Cd²⁺ made XO released from CdTe QDs, causing the enhanced red fluorescence of CdTe QDs and the yellow color of free XO. On this basis, DPA was rapidly (1 min) quantified through fluorescent and colorimetric modes within the ranges of 0.1-5 μM and 0.5-40 μM, respectively. The detection limits for DPA were calculated as low as 42 nM and 240 nM, respectively assigned to fluorescent and colorimetric modes. The level of urinary DPA was further measured. Satisfactory relative standard deviations (fluorescent mode: 0.1%-10.2%, colorimetric mode: 0.8%-1.8%) and spiked recoveries (fluorescent mode: 100.0%-115.0%, colorimetric mode: 86.0%-96.6%) were obtained.

A Novel Sulfonamide, Molecularly Imprinted, Upconversion Fluorescence Probe Prepared by Pickering Emulsion Polymerization and Its Adsorption and Optical Sensing Performance

A novel, molecularly imprinted, upconversion fluorescence probe (UCNP@MIFP) for sulfonamide sensing was fabricated by Pickering emulsion polymerization using UCNP@SiO₂ particles as the stabilizer and sulfamethazine/sulfamerazine as the co-templates. The synthesis conditions of the UCNP@MIFP were optimized, and the synthesized probe was characterized by scanning electron microscopy, Fourier transform infrared spectrometer, thermogravimetric analyzer, and fluorescence spectrometer. The UCNP@MIFPs showed a good adsorption capacity and a fast kinetic feature for the template. The selectivity experiment revealed that the UCNP@MIFP has a broad-spectrum molecular recognition capability. Good linear relationships were obtained over the concentration range of 1-10 ng/mL for sulfamerazine, sulfamethazine, sulfathiazole, and sulfafurazole, with low limits of detection in the range of 1.37-2.35 ng/mL. The prepared UCNP@MIFP has the potential to detect four sulfonamide residues in food and environmental water.

Selective and ratiometric fluorescence sensing of bisphenol A in canned food based on portable fluorescent test strips

In this study, a conversion method and molecular imprinting technology were used to design molecularly imprinted polymers (MIP)-based ratiometric fluorescence test papers. The ZnO quantum dots (ZnO QDs) acted as the background quantum dots and ZIF-8 raw material. Carbon dots (CDs) were used as the identification signals. The imprinting layer achieved a selective function. Therefore, a ZnO@ZIF-8/CDs@MIPs sensor was designed for the detection of Bisphenol A (BPA). The sensor exhibited a fast response time for BPA detection. In addition, the sensor demonstrated that effective detection of BPA can still be achieved in complex environments. The detection limit of this sensor was 0.778 nM with a linear range of 0-60 nM. The corresponding test solutions exhibited clear changes from blue to yellow. The selectivity experiments results demonstrated that ZnO@ZIF-8/CDs@MIPs only exhibit excellent selective recognition effect for BPA. ZnO@ZIF-8/CDs@MIPs-2 was used for the detection of BPA in canned food and compared with the results of HPLC detection of BPA. The two spiked recovery ranges were 96.58-102.04% and 97.43-103.82%, respectively. In addition, the prepared ZnO@ZIF-8/CDs@MIPs-2 test paper visually recognized BPA under ultraviolet light. This study provides guidelines for the design and application of fluorescent test papers for quick detection in practical applications.

Differential sensitization toward lanthanide metal-organic framework for detection of an anthrax biomarker

A novel Tb-doped Eu-based metal-organic framework (Eu-MOF@Tb) has been developed by incorporating hexanuclear europium cluster and 2,2'-bipyridine-5,5'-dicarboxylic acid as well as coordination with Tb(III). Owing to the diverse coordination status of Tb(III) and Eu(III) in MOF, antenna effect emission from Tb(III) can be invoked by dipicolinic acid (DPA), but the luminescence originating from Eu(III) remains unchanged. Taking advantage of this phenomenon, a ratiometric luminescent method for detection of DPA, a biomarker for Bacillus subtilis spores, was developed through differential sensitization toward lanthanide ions. This analysis method allowed for the detection of DPA in the 0.2-10 μM concentration range, with a detection limit of 60 nM. It was further validated by spiked recoveries (89.3-110%) of real-world samples with RSD values in the range 3.9-11%. Alongside this, a paper indicator test was prepared for naked-eye detection of DPA via a dose-sensitive color evolution from red to green under UV light. The effectiveness of the proposed approach was explored in the detection of bacterial spores in real biological and environmental samples and indicated great potential for applications as a real-time monitoring system against the anthrax threat.

Dual-ligand lanthanide metal-organic framework for ratiometric fluorescence detection of the anthrax biomarker dipicolinic acid

Dipicolinic acid (DPA) is a unique biomarker of Bacillus anthracis. Development of a simple, fast, sensitive and timely DPA detection method is of great importance and interest for preventing mass disease outbreaks and treatment of anthrax. In this work, a novel lanthanide-doped fluorescence probe was constructed by coordination of Eu³⁺ with bifunctional UiO-66-(COOH)₂-NH₂ MOFs materials for efficient monitoring DPA. UiO-66-(COOH)₂-NH₂ MOFs were prepared using Zr⁴⁺ as a metal node, 1,2,4,5-benzenetetracarboxylic acid (H₄BTC) and 2-aminoterephthalic acid (NH₂-BDC) as bridging ligand through a simple one-pot synthesis method. By virtue their abundant carboxyl groups, UiO-66-(COOH)₂-NH₂ can readily grasp Eu³⁺ to form UiO-66-(COOH)₂-NH₂/Eu with coordinated water molecules at Eu sites. Upon interaction with DPA molecules, the coordinated H₂O molecules were replaced by DPA molecules which transfer energy to Eu³⁺ in UiO-66-(COOH)₂-NH₂/Eu and sensitize Eu³⁺ luminescence. Meanwhile, DPA has a characteristic absorption band at 270 nm, which overlapped with the excitation spectrum of NH₂-BDC, allowing the fluorescence of UiO-66-(COOH)₂-NH₂/Eu at 453 nm to be greatly quenched by DPA through inner filter effect (IFE). Therefore, the rationally designed UiO-66-(COOH)₂-NH₂/Eu complex not only exhibits strong hydrophilicity and high dispersion, but also serves as ratiometric fluorescence sensing platform for monitoring DPA concentration. This sensing platform showed a satisfactory linear relationship from 0.2 μM to 40 μM with a limit of detection of 25.0 nM and a noticeable fluorescence color change from blue to red, holding a great promise in practical applications.

Ion exchange fabrication of lanthanide functionalized layered double hydroxides microcapsules for rapid and visual detection of anthrax biomarker

Lanthanide ion probes have recently been considered as promising sensing materials due to their high sensitivity and good optical properties. Herein, the 3D hierarchical lanthanide functionalized layered double hydroxides microcapsules were synthesized via a facile ion exchange strategy and further developed as novel fluorescent probes for detecting trace amounts of the anthrax biomarker dipicolinicacid (DPA). Benefiting from the 3D porous superstructure and abundant unsaturated coordination sites of lanthanide ion, the ternary Ni-Fe-Ln-LDHs (Ln = Tb/Eu) not only possess a large reactive contact area to improve the sensitivity of DPA detection, but also demonstrate very fast reaction rate. The design of inexpensive fluorescent test strips can perform the on-site and real-time detection via a smartphone with a color recognition application. More prominently, the sensitivity of the system was evaluated by actual spore samples with the detection limit as low as 3.54 × 10⁴ spores/mL. The 3D lanthanide functionalized LDHs nanoprobe constructed by ion exchange exhibits a new vision for the development of a sensing platform in other research areas.

Dye-sensitized lanthanide containing nanoparticles for luminescence based applications

Due to their exceptional luminescent properties, lanthanide (Ln) complexes represent a unique palette of probes in the spectroscopic toolkit. Their extremely weak brightness due to forbidden Ln electronic transitions can be overcome by indirect dye-sensitization from the antenna effect brought by organic ligands. Despite the improvement brought by the antenna effect, (bio)analytical applications with discrete Ln complexes as luminescent markers still suffers from low sensitivity as they are limited by the complex brightness. Thus, there is a need to develop nano-objects that cumulate the spectroscopic properties of multiple Ln ions. This review firstly gives a brief introduction of the spectral properties of lanthanides both in complexes and in nanoparticles (NPs). Then, the research progress of the design of Ln-doped inorganic NPs with capping antennas, Ln-complex encapsulated NPs and Ln-complex surface functionalized NPs is presented along with a summary of the various photosensitizing ligands and of the spectroscopic properties (excited-state lifetime, brightness, quantum yield). The review also emphasizes the problems and limitations encountered over the years and the solutions provided to address them. Finally, a comparison of the advantages and drawbacks of the three types of NP is provided as well as a conclusion about the remaining challenges both in the design of brighter NPs and in the luminescence based applications.

Tracking the Stepwise Formation of a Water-Soluble Fluorescent Tb12 Cluster for Efficient Doxorubicin Detection

Doxorubicin (DOX) is an anthraquinone drug used for the efficient treatment of a variety of tumors in human beings. Unfortunately, its poor biodegradability causes incomplete metabolism in the body. Therefore, it is of great significance to synthesize a sensitive and selective material for DOX detection. In this paper, we report a water-soluble Tb₁₂ cluster and track its step-by-step formation (L → Tb₁L₁ → Tb₂L₁ → Tb₂L₂ → Tb₃L₂ → Tb₄L₂ → Tb₁₂L₆). Tb₁₂ can be used to determine the presence of DOX, which quenches the luminescence of the Tb₁₂ aqueous solution, and the detection limit can reach 13 nM (K_SV = 8.7 × 10⁵ M^-1). Tb₁₂ has advantages of high sensitivity and high selectivity for the detection of DOX in a simulated environment of human urine and serum.

Smartphone-based mobile biosensors for the point-of-care testing of human metabolites

Rapid, accurate, portable and quantitative profiling of metabolic biomarkers is of great importance for disease diagnosis and prognosis. The recent development in the optical and electric biosensors based on the smartphone is promising for profiling of metabolites with advantages of rapid, reliability, accuracy, low-cost and multi-analytes analysis capability. In this review, we introduced the optical biosensing platforms including colorimetric, fluorescent and chemiluminescent sensing, and electrochemical biosensing platforms including wired and wireless communication. Challenges and future perspectives desired for reliable, accurate, cost-effective, and multi-functions smartphone-based biosensing systems were also discussed. We envision that such smartphone-based biosensing platforms will allow daily and comprehensive metabolites monitoring in the future, thus unlocking the potential to transform clinical diagnostics into non-clinical self-testing. We also believed that this progress report will encourage future research to develop advanced, integrated and multi-functional smartphone-based Point-of-Care testing (POCT) biosensors for the monitoring and diagnosis as well as personalized treatments of a spectrum of metabolic-disorder related diseases.

Preparation of carbon dots-doped terbium phosphonate coordination polymers as ratiometric fluorescent probe for citrate detection

In this work, carbon dots-doped terbium phosphonate coordination polymers (CDs-GMP/Tb) were designed and prepared as ratiometric fluorescent probes for the detection of citrate. The as-prepared CDs-GMP/Tb are prepared and have the merits of high photostability, low toxicity, and excellent biocompatibility. The as-prepared CDs-GMP/Tb as ratiometric fluorescent probes also have better anti-interference ability and stability compared with the traditional single fluorescent probe. The surface morphology, fabrication, and spectroscopy were characterized through a variety of instruments. It confirms that the probes exhibited network structure doping carbon dots. With the addition of citrate, the fluorescence of GMP/Tb at 545 nm was significantly quenched, contrasting to the enhancement of fluorescence of CDs at 454 nm. Under optimum conditions, the detection limit for citrate was 0.47 μM, with a linear range of 0-200 μM between citrate concentrations and I₅₄₅/I₄₅₄. It has high sensitivity, selective, and rapid detection for citrate. The as-prepared CDs-GMP/Tb as ratiometric fluorescent probes were also used for imaging citrate in living cells. These experiment results showed that CDs-GMP/Tb as ratiometric fluorescent probes could be applied to trace citrate detection in the environmental and biological fields.

Lanthanide metal-organic framework as a paper strip sensor for visual detection of sulfonamide with smartphone-based point-of-care platform

Antibiotic residues in aquatic environments have attracted wide attention. Considering the impacts on the ecosystem and human health, it is urgent to develop a rapid method for detecting antibiotic residues in the environment. In this work, a nanoscale lanthanide metal-organic framework Eu(TATB) with a stable red luminescence in aqueous solution is synthesized by the microemulsion method. Sulfamethazine (SMZ) is frequently most used in veterinary medicine as one of sulfonamides. Eu(TATB) can be used for sensitively and rapidly specific recognition of SMZ with low detection limit (0.67 μM) and eminent recyclability. In addition, a paper-based visual system for point-of-care (POC) monitoring SMZ is devised by both using filter paper embedded with Eu(TATB) and our developed portable smartphone-involved imaging cassette. The naked eyes can observe that the red luminescence of the paper sensor gradually fades away at the presence of SMZ. This provides a reliable and effective method for on-site detection of sulfonamide antibiotics in the field of environmental monitoring.

ZIF-8@GMP-Tb nanocomplex for ratiometric fluorescent detection of alkaline phosphatase activity

Luminescent metal-organic frameworks (LMOFs) and their functional materials with unique characteristics can provide the basis for the construction of new analytical techniques, which can meet the continuous demand for various fields. In this work, guanosine monophosphate (GMP), terbium ion (Tb³⁺) and zeolitic imidazolate framework-8 (ZIF-8) are self-assembled to form a ZIF-8@GMP-Tb nanocomplex, which can be utilized as a ratiometric fluorescent probe to monitor alkaline phosphatase (ALP) activity. Specifically, with adding ALP, the fluorescence intensity at 547 nm (one of the characteristic emission peaks of Tb³⁺) obviously decreased. Meanwhile, the conjugated structure of GMP increased the fluorescence of ZIF-8 (located at 330 nm). The possible mechanism was proposed through the characterization of the materials. Based on the variation of the emission peaks at 330 and 547 nm, the ratiometric fluorescent sensor of ALP has a linear range of 0.25-20 U/L. Moreover, applying this sensing system to the detection of ALP in the human serum sample and ALP inhibitor investigation possesses satisfactory results. This work provides a new perspective for the utilization of ZIF-8 and lanthanide ions in manufacturing simple and sensitive sensors.

A time-resolved ratiometric luminescent anthrax biomarker nanosensor based on Ir(III) complex-doped coordination polymer network

Herein, an Ir(III) complex-doped coordination polymer networks (Ir(III)@GMP-Eu3+) is firstly fabricated for the ratiometric luminescent detection of anthrax biomarker 2,6-dipicolinic acid (DPA) through time-resolved emission spectra (TRES) measurement. The detection...

Smart intercalation and coordination strategy to construct stable ratiometric fluorescence nanoprobes for the detection of anthrax biomarker

L@Mg-Al-Ln-LDHs (Ln = Tb, Eu) constructed by the intercalation coordination strategy exhibited a strong and stable fluorescence reference signal and achieved reliable ratiometric detection of DPA in complex environments and actual spores.

Construction of a TRFIC strip for rapid and sensitive detection of Ralstoniasolanacearum

The development of a sensitive and rapid screening method for Ralstonia solanacearum is critical for the control of tobacco wilt. In the present study, tissue homogenates of three tobacco varieties (Honda, Yunnan 87 and K326) with different resistance to R. solanacearum, were individually used as additives to the bacteria culture medium. The changes in R. solanacearum secretome were investigated and one of the most abundant secretary proteins with increased expression, polygalacturonase (PG), was selected as a marker for R. solanacearum identification. Then PG gene was cloned into E. coli, and the expressed protein was used as the immunogen to develop monoclonal antibodies. Subsequently, the monoclonal antibody against PG was coupled with synthesized polystyrene microspheres, and a rapid test strip system was developed for the detection of R. solanacearum based on time-resolved fluorescent immunochromatographic (TRFIC) method. Under optimal conditions, the detection limit of the strips could reach 72 cells/mL; while it was 422 cells/mL with a linear range from 4 × 10² to 5.12 × 10⁴ cells/mL when testing tobacco samples, which is 1000 times lower than that of colloidal gold-labeled strips. Notably, no cross-reactivity was observed with nine tobacco-related pathogens. Finally, this TRFIC strips was applied to detect R. solanacearum existed in the tobacco and soils of fields with or without bacterial wilt. The results demonstrated that this TRFIC strips could distinguish the difference in bacterial concentration existed in tobacco and soil between the two fields. In summary, this test strip is suitable for sensitive, quick screening of R. solanacearum in tobacco.

Lanthanide upconversion and downshifting luminescence for biomolecules detection

Biomolecules play critical roles in biological activities and are closely related to various disease conditions. The reliable, selective and sensitive detection of biomolecules holds much promise for specific and rapid biosensing. In recent years, luminescent lanthanide probes have been widely used for monitoring the activity of biomolecules owing to their long luminescence lifetimes and line-like emission which allow time-resolved and ratiometric analyses. In this review article, we concentrate on recent advances in the detection of biomolecule activities based on lanthanide luminescent systems, including upconversion luminescent nanoparticles, lanthanide-metal organic frameworks, and lanthanide organic complexes. We also introduce the latest remarkable accomplishments of lanthanide probes in the design principles and sensing mechanisms, as well as the forthcoming challenges and perspectives for practical achievements.

Disposable Paper-Based Biosensors for the Point-of-Care Detection of Hazardous Contaminations-A Review

The fast detection of trace amounts of hazardous contaminations can prevent serious damage to the environment. Paper-based sensors offer a new perspective on the world of analytical methods, overcoming previous limitations by fabricating a simple device with valuable benefits such as flexibility, biocompatibility, disposability, biodegradability, easy operation, large surface-to-volume ratio, and cost-effectiveness. Depending on the performance type, the device can be used to analyze the analyte in the liquid or vapor phase. For liquid samples, various structures (including a dipstick, as well as microfluidic and lateral flow) have been constructed. Paper-based 3D sensors are prepared by gluing and folding different layers of a piece of paper, being more user-friendly, due to the combination of several preparation methods, the integration of different sensor elements, and the connection between two methods of detection in a small set. Paper sensors can be used in chromatographic, electrochemical, and colorimetric processes, depending on the type of transducer. Additionally, in recent years, the applicability of these sensors has been investigated in various applications, such as food and water quality, environmental monitoring, disease diagnosis, and medical sciences. Here, we review the development (from 2010 to 2021) of paper methods in the field of the detection and determination of toxic substances.

Current Progress on Antibiotic Sensing Based on Ratiometric Fluorescent Sensors

Antibiotics, which can be used as veterinary drugs, are widely used in the prevention and treatment of infectious diseases for animals. However, overuse of antibiotics had caused serious problems on food contamination and human harm. For control such public issues, several of techniques have been in recent years. Ratiometric fluorescent (RF) technique, as one of the most promising strategies for quantitatively evaluated analytes, had been extensively developed for the readily measurements on the two different fluorescent emission intensities. In this review, the construction strategies for recent RF sensors will be mainly focused on. Meanwhile, the recent advances and new tendencies for detection of antibiotics based on RF technique shall be introduced. Finally, outlooks on the opportunities and challenges for quantitative fluorescence sensing on antibiotics will be summarized.

Eu(III)-DO3A and BODIPY dyad as a chemosensor for anthrax biomarker

The sensitive and selective determination of Bacillus anthracis spores before the infection is vital for human health and safety. Dipicolinic acid (DPA) is an excellent biomarker due to its presence in the nucleus of bacterial spores at high concentrations (up to 1 M, about 15% dry weight). In the present work, a new molecular chemosensor 1, based on europium(III)-DO3A and BODIPY dyad, is developed to detect DPA in phosphate-buffered saline (PBS) buffered solution and tap water samples. Also, 1 can be used as a ratiometric optical chemosensor to track DPA.

Smartphone-assisted point-of-care colorimetric biosensor for the detection of urea via pH-mediated AgNPs growth

Smartphone-assisted point-of-care (POC) bioassay has brought a giant leap in personal healthcare system and environmental monitoring advancements. In this study, we developed a rapid and reliable colorimetric urea biosensor assisted by a smartphone. We employed hydrolysis of urea into NH₃ by urease, which activates the reduction power of tannic acid, to generate silver nanoparticles for a dramatic colorimetric response. The proposed urea biosensor was validated in a solution to provide high selectivity against various interferents in human urine. It had high sensitivity, with a limit of detection as low as 0.0036 mM, and a high reliability of 99% ± 2.9% via the standard addition method. The urea biosensor was successfully implanted on a paper to facilitate smartphone-assisted POC readout with a limit of detection of 0.58 mM and wide detection range of 500 mM, whereby direct diagnosis of human urine without dilution was realized. Our smartphone-assisted POC colorimetric urea biosensor will pave the way for daily monitoring systems of renal and hepatic dysfunction diseases.

Fluorescent paper-based DNA sensor using pyrrolidinyl peptide nucleic acids for hepatitis C virus detection

A novel fluorescent paper-based DNA sensor employing a highly specific pyrrolidinyl peptide nucleic acid (acpcPNA) probe was developed for the sensitive and selective detection of hepatitis C virus (HCV). The acpcPNA was covalently immobilized onto partially oxidized cellulose paper via reductive alkylation between the amine and the aldehyde groups. The fluorescence-based detection was performed by monitoring the fluorescence signal response of a fluorescent dye that selectively binds to the single-strand region of the DNA target over the PNA probe employing a custom-made portable fluorescent camera gadget in combination with a smartphone camera. Under the optimal conditions, a linear relationship between the fluorescence change in the green channel and the amount of HCV DNA from 5 to 100 pmol with a correlation coefficient of 0.9956, and the limit of detection of 5 pmol were obtained for short synthetic oligonucleotides. The acpcPNA probe exhibited very high selectivity for the complementary oligonucleotides over the single-base-mismatched, two-base-mismatched, and non-complementary DNA targets. Benefitting from the signal amplification achieved through the numerous binding sites for the dye provided by the overhanging tail of long ssDNA target sequences, this system was successfully applied to detect the HCV complementary DNA (cDNA) obtained from clinical samples with satisfactory results. The proposed fluorescent paper-based sensor demonstrated a great potential to be used as a low-cost, simple, label-free, sensitive, and selective DNA sensor for point-of-care applications.

A multiplex bacterial assay using an element-labeled strategy for 16S rRNA detection

A multiplex bacterial assay method that combines S1 nuclease pretreatment and ICP-MS-based elemental labels is presented in this work. Six intestinal related bacteria were identified at the species level and quantified simultaneously without isolation culturing. This method could be extended to assay a mixed bacterial community for point-of-care diagnosis.

A carbon dot doped lanthanide coordination polymer nanocomposite as the ratiometric fluorescent probe for the sensitive detection of alkaline phosphatase activity

The development of sensitive methods for alkaline phosphatase (ALP) activity analysis is an important analytical topic. Based on the stimulus-responsive lanthanide coordination polymer, a simple ratiometric fluorescence sensing strategy was proposed to detect ALP activity. A carbon dot (CD) doped fluorescent supramolecular lanthanide coordination polymer (CDs@Tb-GMP) was prepared with Tb³⁺ and the ligand guanine single nucleotide (GMP). To construct a ratiometric fluorescence biosensor, the fluorescence of Tb-GMP was used as a response signal, and the fluorescence of CDs was used as a reference signal due to its good stability. When excited at 290 nm, the polymer network Tb-GMP emits characteristic fluorescence at 545 nm, while the CDs encapsulated in the polymer network emit fluorescence at 370 nm. After adding ALP to the system, the substrate GMP can be hydrolyzed by ALP, resulting in the destruction of the polymer network. Accordingly, the fluorescence of Tb-GMP significantly decreased, while the fluorescence of CDs slightly increased due to their release from the polymer network. By comparing the relationship between the fluorescence intensity ratio of the two signals and the concentration of ALP, sensitive detection of ALP could be achieved with the linear range from 0.5 to 80 U L^-1 and a detection limit of 0.13 U L^-1. Furthermore, the proposed ratiometric sensing system was applied to the detection of ALP in human serum samples with desirable results, indicating potential application in clinical diagnosis.

Ratiometric fluorescence detection of anthrax biomarker based on terbium (III) functionalized graphitic carbon nitride nanosheets

Detection of anthrax biomarker dipicolinic acid (DPA) is of great importance upon the crisis of bioterrorism. Development of fluorescent materials for DPA detection, particularly one that fully depends on single luminescent response, faces the challenge of being susceptible to interferences. The accompanying accuracy problems offer great opportunities for the establishment of more reliable ratiometric analysis method. Herein, a ratiometric fluorescent probe based on terbium functionalized graphitic carbon nitride nanosheets (Tb-g-C₃N₄NS) is attempted for quantitative detection of DPA to address the distinct function of g-C₃N₄NS as both carrier and reference fluorophore, which is a so-far unexplored option in fluorescent detection approaches. We achieve the incorporation of Tb³⁺ into framework of g-C₃N₄NS by using a simple synthetic strategy comprised of thermal pyrolysis and ultrasonic exfoliation. Combining the reference signal over g-C₃N₄NS at 440 nm (I₄₄₀) with the response signal of Tb³⁺ at 546 nm (I₅₄₆), concentration of DPA can be easily calculated via its linear correlation with the intensity ratio (I₅₄₆/I₄₄₀), giving a precise measurement towards DPA with a detection limit as low as 9.9 nM. Besides enabling an excellent self-calibrating detection of DPA, this work also inspires broader use of g-C₃N₄NS for relevant process.

A multifunctional fluorescent probe for visualizing H2S in wastewater with portable smartphone via fluorescent paper strip and sensing GSH in vivo

In this paper, a bifunctional tri-site fluorescent probe was designed for the first time not only for visualization and quantitative analysis of sensing H₂S in wastewater by coupling paper strip and smartphone (Color recognizer, Xiyi Technology) but also for sensitively monitoring GSH in living cells, which relied on different emission channels and the pH of solutions. The recognition properties of GH towards H₂S/GSH were satisfactorily demonstrated through fluorescence, UV-vis, ¹H NMR and DFT calculations. More importantly, integrated with the paper strip, portable smartphone-sensing platform with a color recognizer app would accomplish cost-effective and rapid assays for colorimetric water quality testing, which displayed huge application potential in fields of environmental monitoring.