Ultrasensitive electrochemical biosensing platform based on spherical silicon dioxide/molybdenum selenide nanohybrids and triggered Hybridization Chain Reaction

A novel electrochemical aptasensor based on AgPdNPs/PEI-GO and hollow nanobox-like Pt@Ni-CoHNBs for procymidone detection

Herein, an aptasensor based on a signal amplification strategy was developed for the sensitive detection of procymidone (PCM). AgPd nanoparticles/Polenimine Graphite oxide (AgPdNPs/PEI-GO) was weaned as electrode modification material to facilitate electron transport and increase the active sites on the electrode surface. Besides, Pt@Ni-Co nanoboxes (Pt@Ni-CoHNBs) were utilized to be carriers for signaling tags, after hollowing ZIF-67 and growing Pt, the resulting Pt@Ni-CoHNBs has a tremendous amounts of folds occurred on the surface, enables it to carry a larger quantity of thionine, thus amplify the detectable electrochemical signal. In the presence of PCM, the binding of PCM to the signal probe would trigger a change in electrical signal. The aptasensor was demonstrated with excellent sensitivity and a low detection limit of 0.98 pg·mL-1, along with a wide linear range of 1 μg·mL-1 to 1 pg·mL-1. Meanwhile, the specificity, stability and reproducibility of the constructed aptasensor were proved to be satisfactory.

A fluorescence-electrochemical dual-mode aptasensor based on novel DNA-dependent PBNFs@PtPd for highly selective and sensitive detection of procymidone through hybridization chain reaction

Herein, a study for the first application of a hybridization chain reaction, a 1,8-naphthalimides-DNA (NDs) intercalator, and DNA-dependent Prussian blue nanoflowers@PtPd materials (PBNFs@PtPd) in the development of a fluorescence-electrochemical (FL-EC) aptasensor. This construction establishes an efficient sensing platform for the detection of procymidone (PCM). In the context of the described experiment, dual-mode detection is achieved through the generation of FL signals by an aptamer labeled with a Cy5 moiety and the formation of DPV signals by the modification of a thionine-appended 1,8-naphthalimide (Thi-NDs). In the presence of PCM, specific recognition occurs, followed by the utilization of magnetic separation technology to release DNA1 (S1) and aptamer-Cy5 (Apt-Cy5), subsequently introducing them onto both fluorescence and EC platforms. The presence of S1 effectively activates hybridization chain reaction (HCR) for the electrode surface, thereby significantly increasing the binding sites for Thi-NDs and consequently greatly amplifying the response signal of differential pulse voltammetry (DPV). The developed FL-EC dual-mode sensing platform demonstrates high sensitivity in the detection of PCM, with the detection limits of 0.173 μg·ml-1 (within the detection range of 500 pg·ml-1 to 500 ng·ml-1) and 0.074 ng·ml-1 (within the detection range of 100 pg·ml-1 to 100 ng·ml-1), respectively. The designed dual-mode sensor exhibits notable characteristics, including high selectivity, reproducibility, synergy, and reliable monitoring/capability for PCM in real samples.

Smart Stimuli-Responsive Spherical Nucleic Acids: Cutting-Edge Platforms for Biosensing, Bioimaging, and Therapeutics

Spherical nucleic acids (SNAs) with exceptional colloidal stability, multiple modularity, and programmability are excellent candidates to address common molecular delivery-related issues. Based on this, the higher targeting accuracy and enhanced controllability of stimuli-responsive SNAs render them precise nanoplatforms with inestimable prospects for diverse biomedical applications. Therefore, tailored diagnosis and treatment with stimuli-responsive SNAs may be a robust strategy to break through the bottlenecks associated with traditional nanocarriers. Various stimuli-responsive SNAs are engineered through the incorporation of multifunctional modifications to meet biomedical demands with the development of nucleic acid functionalization. This review provides a comprehensive overview of prominent research in this area and recent advancements in the utilization of stimuli-responsive SNAs in biosensing, bioimaging, and therapeutics. For each aspect, SNA nanoplatforms that exhibit responsive behavior to both internal stimuli (including sequence, enzyme, redox reactions, and pH) and external stimuli (such as light and temperature) are highlighted. This review is expected to offer inspiration and guidance strategies for the rational design and development of stimuli-responsive SNAs in the field of biomedicine.

Mn2+-Triggered Swing-Arm Robot Strategy Using Anemone-Like Thi@AuPd@Cu-MOFs as Signaling Probes for the Detection of T-2 Toxin

Herein, we synthesized anemone-like copper-based metal-organic frameworks (MOFs) loaded with gold-palladium nanoparticles (AuPd@Cu-MOFs) and polyethylenimine-reduced graphene oxide/gold-silver nanosheet composites (PEI-rGO/AuAg NSs) for the first time to construct the sensor and to detect T-2 toxin (T-2) using triple helix molecular switch (THMS) and signal amplification by swing-arm robot. The aptasensor used PEI-rGO/hexagonal AuAg NSs as the electrode modification materials and anemone-like AuPd@Cu-MOFs as the signal materials. The prepared PEI-rGO/hexagonal AuAg NSs had a large specific surface area, excellent electrical conductivity, and good stability, which successfully improved the electrochemical performance of the sensors. The AuPd@Cu-MOFs with high porosity provided a great deal of attachment sites for the signaling molecule thionine (Thi), thereby increasing the signal response. The aptasensor developed in this study demonstrated a remarkable detection limit of 0.054 fg mL-1 under optimized conditions. Furthermore, the successful detection of T-2 in real samples was achieved using the fabricated sensor. The simplicity of the THMS-based method, which entails modifying the aptamer sequence, allows for easy adaptation to different target analytes. Thus, the sensor holds immense potential for applications in quality supervision and food safety.

AuNPs@MoSe2 heterostructure as a highly efficient coreaction accelerator of electrocheluminescence for amplified immunosensing of DNA methylation

Electrocheluminescence analysis amplified by coreaction accelerators has experienced breakthrough in ultrasensitive detection of biomarkers. Herein, a highly efficient coreaction accelerator, two-dimensional layered MoSe₂ nanosheets loaded with gold nanoparticles (AuNPs@MoSe₂ heterostructure), is proposed to enhance the ECL efficiency of Ru(bpy)₃²⁺/tripropylamine (TPrA) system. The presence of AuNPs avoids the aggregation of MoSe₂ nanosheets, and improves the electrical conductivity of modified surface. The AuNPs@MoSe₂ modified electrode also provides a large area for loading of abundant capture probe. MoSe₂ as an electroactive substrate can remarkably accelerate the generation of TPrA^•+ radicals to react with electrooxidized Ru(bpy)₃²⁺, which achieves about 3.4-fold stronger ECL intensity. Thus, an enhanced ECL immunoassay method can be achieved after Ru(bpy)₃²⁺-doped silica nanoparticle labeled antibody (Ab₂-Ru@SiO₂) is captured to the modified electrode via immunological recognition. Using methylated DNA as a target, the immunosensor was prepared by binding capture DNA on AuNPs@MoSe₂ modified electrode to successively capture the target, anti-5-methylcytosine antibody (anti-5mC) and Ab₂-Ru@SiO₂. The proposed strategy could detect 0.26 fM 5 mC (3σ) with a detectable concentration range of 1.0 fM - 10 nM at methylated DNA. This immunosensor showed excellent selectivity, good stability and reproducibility, and acceptable recovery, indicating the broad prospects of the novel coreaction accelerator in clinical diagnosis.

A novel detection strategy for nitrofuran metabolite residues: Dual-mode competitive-type electrochemical immunosensor based on polyethyleneimine reduced graphene oxide/gold nanorods nanocomposite and silica-based multifunctional immunoprobe

Excessive residues of semicarbazide (SEM) can accumulate in animals after the original drug has been abused, posing a risk to human health. Herein, based on multifunctional silica-initiated dual mode signal response, a novel competitive-type immunosensor was constructed for ultrasensitive detection of SEM. As a preliminary signal amplification platform for immunosensors, polyethyleneimine reduced graphene oxide composite gold nanorods (PEI-rGO/AuNRs) modified gold electrodes (AuE) provide a high specific surface area and high electrical conductivity. The thionine-aminated silica nanospheres-AuPt (thi-SiO₂@AuPt) were synthesized by a racile coprecipitation method for enzyme immobilization and redox species loading. The multifunctional silica nanosphere conjugated with labeling antibodies (Ab₂) was employed as an immunoprobe. The per unit concentration target of SEM can be determined by differential pulse voltammetry (DPV) to detect the thi loaded on the immunoprobe, which can also be determined by square wave voltammetry (SWV) to detect the current generated by the reaction system of H₂O₂ and hydroquinone (HQ) catalyzed by the immunoprobe with peroxidase. Under optimal conditions, the proposed immunosensor displayed a wide linear range from 1 μg-0.01 ng/mL and low detection limits (S/N = 3) of 0.488 pg/mL and 0.0157 ng/mL, respectively. Ultimately, the developed method exhibits excellent performance in practical applications, providing promising probabilities for SEM detection.

A label-free electrochemical aptasensor based on NH2-MIL-235(Fe) for the sensitive detection of citrinin

This study successfully developed a simple, specific, and ultrasensitive electrochemical aptasensor based on a label-free strategy for detecting citrinin (CIT). The NH₂-Fe-MOF nanomaterial has a large specific surface area, good biocompatibility, a simple preparation method, and low synthesis cost, so it was chosen as the aptamer's loading platform to improve the detection performance of the sensor. When CIT is present, the aptamer will specifically bind to it with a conformational change that prevents electron transfer to the electrode surface. Based on this, CIT could be quantitatively detected by measuring the change of differential pulse voltammetric (DPV) responses of the [Fe(CN)₆]^3-/4- peak current. Under optimized experimental conditions, the proposed aptasensor showed a low detection limit of 4.52 × 10^-11 g mL^-1 and a wide linear range of 0.1 to 1 × 10⁴ ng mL^-1. Furthermore, the proposed aptasensor shows excellent selectivity, reliable stability, and significant potential for the ultrasensitive detection of CIT in practical applications.

Ultrasensitive detection of patulin based on a Ag+-driven one-step dual signal amplification

Due to improper storage, the presence of patulin in fruits poses a threat to food safety. Herein, a one-step dual amplification strategy-based electrochemical aptasensor was proposed for patulin detection. Silver-palladium nanoparticles (AgPdNPs) with a hollow and branched structure were used as a supporting material for thionine to provide numerous attachment sites. AuNFs/g-C₃N₄ was employed as an electrode modification material, which has been demonstrated to facilitate electron transport and improve signal label loading capacity. Ag⁺ ions were released in the presence of patulin, activating the Ag⁺-DNAzyme on the electrode surface. The formed Ag⁺-DNAzymes further cyclically cleaved the substrate DNA, and the released sequences were used as a new trigger to mediate the secondary recirculation. This one-step dual amplification strategy enabled double target recycling without additional procedures. The signal cascade amplification through dual target recycling, was thus available for trace detection of patulin. Under the optimal conditions, the electrochemical aptasensor achieved a satisfactory linear range from 5.0 × 10^-6 μg L^-1 to 50 μg L^-1 with a detection limit of 0.92 fg·mL^-1 for the determination of patulin. In addition, the aptasensor exhibited favorable selectivity, reproducibility, repeatability and long-term stability, and thus can be employed for patulin detection in apple juice samples, providing excellent choice for the detection of trace patulin.

Electrochemical aptasensor based on Ce3NbO7/CeO2@Au hollow nanospheres by using Nb.BbvCI-triggered and bipedal DNA walker amplification strategy for zearalenone detection

Herein, an electrochemical aptasensor combining Nb.BbvCI-triggered bipedal DNA walking strategy was constructed for ultrasensitive assay of zearalenone (ZEN). The aptasensor used Ce₃NbO₇/CeO₂ @Au hollow nanospheres as electrode modification material and PdNi@MnO₂/MB as the signal label. Importantly, the Ce₃NbO₇/CeO₂ synthesized by hydrothermal method were combined with Au nanoparticles and applied to the electrode surface. The as-prepared Ce₃NbO₇/CeO₂ @Au possessed a large surface area, excellent electrical conductivity, stability and more binding sites. PdNi@MnO₂ with high specific surface area and porosity combined with molecule methylene blue (MB) was introduced into electrodes as the signal label. The proposed aptasensor utilized the advantages of specific recognition of aptamers and target molecules to release bipedal DNA walker (w-DNA), and then the w-DNA was triggered by Nb.BbvCI and entered the cycle to release more signal probes. The feasibility of this strategy was recorded by the differential pulse voltammetry (DPV) method. Under the optimized conditions, the electrochemical aptasensor exhibited a wide linear dynamic range from 1 × 10^-4 to 1 × 10³ ng mL^-1 with a low detection limit of 4.57 × 10^-6 ng mL^-1. Moreover, the aptasensor had high selectivity, good stability, excellent repeatability and provided an effective method for the trace detection of ZEN in real samples.

Molecular Recognition-Triggered Aptazyme Sensor Using a Co-MOF@MCA Hybrid Nanostructure as Signal Labels for Adenosine Triphosphate Detection in Food Samples

Developing rapid detection technology for adenosine triphosphate (ATP) is crucial in quality supervision and food safety. Herein, an electrochemical aptasensor based on an aptazyme-catalyzed signal amplification strategy is constructed for ATP detection using polyethyleneimine-functionalized molybdenum disulfide (PEI-MoS₂)/Au@PtPd nanobipyramids (MoS₂/Au@PtPd NBPs) as a modification material. Additionally, a novel kind of nitrogen-rich covalent organic framework (COF) is prepared using melamine and cyanuric acid (MCA). We synthesize MCA and the Co-based metal organic framework (Co-MOF) as the signal label. Due to the fact that π-π stacking interactions of Co-MOF@MCA can expand the load efficiency and surface concentration of the signal label, the signal response is an order of magnitude higher than that of Co-MOF or MCA as the signal label. Target ATP changes the conformation of the aptazyme, and it becomes activated. With the assistance of metal ions, the signal label is circularly cleaved, causing an amplification of the signal. Among them, MoS₂/Au@PtPd NBPs have a large specific surface area and good electrical conductivity and can carry substantial DNA strands and amplify the redox signal of methylene blue (MB). Under optimal conditions, the aptasensor can detect ATP from 10 pM to 100 μM with a low limit of detection of 7.37 × 10^-10 μM. Therefore, the novel aptasensor has extensive application prospects in quality supervision and food safety.

Aminated Multiwalled Carbon Nanotube-Doped Magnetic Flower-like WSe2 Nanosheets for Efficient Adsorption in Acidic Wastewater

The water body environment is related to ecological and human health. Adsorption is an effective means to remove pollutants from water bodies. Currently, the common adsorbents suffer from disadvantages such as structural instability and poor adsorption performance under acidic conditions, which not only affect the adsorption efficiency but also cause secondary pollution of water bodies. In this study, a novel aminated multiwalled carbon nanotube-doped flower-like nanocomposite was designed, where the anionic or neutral groups were protonated under acidic conditions, and it displayed a higher adsorption capacity for dyes by ion exchange, represented by methylene blue (MB) and rhodamine B (RB). WSe₂ in the composite increases its adsorption sites. The adsorption efficiency of pollutants in acidic wastewater was enhanced while avoiding secondary contamination. The synthesized composites showed maximum adsorptions of 27.55 and 27.47 mg/g for MB and RB, respectively. The current work offers a novel approach to treating acidic wastewater.

A Status Update on the Development of Polymer and Metal-Based Graphene Electrochemical Sensors for Detection and Quantitation of Bisphenol A

The detection and quantitation of bisphenol A (BPA) in the environment and food products has been a subject of considerable interest. BPA, a diphenylmethane derivative is a well-known industrial raw material with wide range of applications. It is a well-known endocrine disruptor and acts as an estrogen mimic. BPA is an environmental health concern and its accumulation in hydro-geological cycles is a matter of serious ecological peril. This review basically assesses various chemically modified electrodes composed of diverse components that have been employed to recognize BPA in different matrices. Electrochemical sensors prepared using graphene materials in combination with metals and polymers for selective detection of BPA have been discussed extensively. The emphasis is on detection of BPA in various samples encountered in routine use such as plastic bottles, receipts, baby feed bottles, milk samples, mineralized water, tissue paper, DVDs, and others. Although research in this field is in the exploratory stage, deeper insights into fundamental studies of sensing systems, fast analysis of real samples and validation of sensors are some of the factors that need major impetus. It is expected that chemically modified electrode-based sensing systems will soon take over as a viable option for monitoring diverse pollutants.

Recent progress on transition metal diselenides from formation and modification to applications

The development of graphene promotes the research of similar two-dimensional (2D) materials, especially 2D transition metal dichalcogenides (TMDCs) with semiconductor properties. Monolayer or few-layer TMDCs have several advantages, such as direct band gap, weak interlayer van der Waals force, large interlayer spacing, and abundant marginal active sites, which make them widely used in catalysis, optoelectronics, as well as energy conversion and storage devices. In addition, transition metal diselenides (TMDSs) also possess many intriguing characteristics. For instance, transition metal diselenides (e.g., MoSe₂) have a more stable 1T phase, larger interlayer spacing, smaller band gap, and more obvious metallic property of Se than TMDCs (e.g., MoS₂). Thus, it has become one of the most attractive research topics branching out from TMDCs. Herein, this review unveils the structures, synthesis, properties, modifications, applications, and perspectives for TMDSs.

Molecular imprinted polymer combined with aptamer (MIP-aptamer) as a hybrid dual recognition element for bio(chemical) sensing applications. Review

The development of diagnostic devices based on memetic molecular recognitions are becoming highly promising due to high specificity, sensitivity, stability, and low-cost comparing to natural molecular recognition. During the last decade, molecular imprinted polymers (MIPs) and aptamer have shown dramatic enhancement in the molecular recognition characteristics for bio(chemical) sensing applications. Recently, MIP-aptamer, as an emerging hybrid recognition element, merged the advantages of the both recognition components. This dual recognition-based sensor has shown improved properties and desirable features, such as high sensitivity, low limit of detection, high stability under harsh environmental conditions, high binding affinity, and superior selectivity. Hybrid MIP-aptamer as dual recognition element, was used in the real sample analysis, such as detection of proteins, neurotransmitters, environmental pollutants, biogenic compounds, small ions, explosives, virus detections and pharmaceuticals. This review focuses on a comprehensive overview of the preparation strategies of various MIP-aptamer recognition elements, mechanism of formation of MIP-aptamer, and detection of various target molecules in different matrices.

Molecularly Imprinted Polymers in Diagnostics: Accessing Analytes in Biofluids

Bio-applied molecularly imprinted polymers (MIPs) are biomimetic materials with tailor-made synthetic recognition sites, mimicking biological counterparts known for their sensitive and selective analyte detection. MIPs, specifically designed for biomarker analysis...

Sensitive electrochemical aptasensor for determination of sulfaquinoxaline based on AuPd NPs@UiO-66-NH2/CoSe2 and RecJf exonuclease-assisted signal amplification

The authors designed a sensitive label-free electrochemical aptasensor for the detection of sulfaquinoxaline (SQX), including the AuPd NPs@UiO-66-NH₂/CoSe₂ nanocomposites and RecJf exonuclease-assisted target recycle signal amplification strategy. AuPd NPs@UiO-66-NH₂/CoSe₂ nanocomposite with excellent conductivity and numerous active sites was successfully synthesized to provide a favorable sensing platform and load more double-strand DNA (dsDNA) on the electrode surface. The negatively charged phosphate group of the oligonucleotide and [Fe (CN)₆] ^3-/4- repel each other electrostatically, resulting in very low electrical signals. In the presence of SQX, its corresponding aptamer will be released from the double-stranded structure and then digested by RecJf exonuclease, which resulted in the SQX being released to initiate the next recycling to help amplify the DPV signal. Under the optimal conditions, the peak current has a linear relationship with the logarithmic of SQX concentration in the range of 1 pg/mL∼100 ng/mL and the obtained detection limit was 0.547 pg/mL. Furthermore, the contrasted aptasensor possess reliable specificity, reproducibility and stability toward SQX, and has been applied to detect SQX in pork samples with a satisfied recovery varied from 94.40% to 95.98%.

Specific and sensitive detection of CircRNA based on netlike hybridization chain reaction

Circular RNA (circRNA), as a new class of biomarker, plays an important role in the occurrence and development of cancer. However, the limitations of detection methods in recent years have severely restricted the related research of circRNA. Here, we have developed an effective circRNA detection method based on the thermostatic netlike hybridization chain reaction (HCR). It combines reverse transcription-rolling circle amplification (RT-RCA) with well-designed netlike HCR to achieve dual selection and dual signal amplification, which can eliminate the interference of linear isomers. This two-dimensional netlike HCR is composed of an ingeniously designed trigger chain and two hairpin fuel probes, which can generate a stable network structure with RT-RCA products containing multiple sets of repeats at a constant temperature, thereby producing enhanced fluorescent signals. Systematic studies reveal that the optimized netlike HCR system has higher detection efficiency for DNA strands containing multiple sets of repetitive sequences, can detect circRNA as low as 0.1 pM, and has excellent selectivity. By using human tumor cell lines and tissues, it has been verified that the netlike HCR-based method can accurately detect specific circRNA in real biological samples without RNase R enrichment, which provides a simple and useful platform for detecting low-abundance circRNA. Furthermore, the proposed strategy is also a potential method for detecting some genes containing repetitive sequences, such as telomere DNA, centromere DNA and ribosomal DNA (rDNA).

Immobilization-free electrochemical DNA sensor based on signal cascade amplification strategy

The development of convenient and efficient strategies without using complex nanomaterials or enzymes for signal amplification is very important for bioanalytical applications. Herein, a novel electrochemical DNA sensor was developed by harnessing the signal amplification efficiency of catalytic hairpin assembly (CHA) and a brand-new signal marker tetraferrocene. The prepared sensor had both ends of the probe H2 labeled with tetraferrocene; both ends have a large number of unhybridized T bases, which cause tetraferrocene to move closer to the electrode surface, generating a high-efficiency amplification signal. In the presence of target DNA, it induced strand exchange reactions promoting the formation of double-stranded DNA and recycling of target DNA. Under optimal conditions, the sensor showed a good linear correlation between the peak currents and logarithm of target DNA concentrations (ranging from 0.1 fM to 0.3125 pM) with a detection limit of 0.06 fM, which is obtained by a triple signal-to-noise ratio. Additionally, the prepared sensor possesses excellent selectivity, reproducibility, and stability, demonstrating efficient and stable DNA detection methodology.

Construction of stable bio-Pd catalysts for environmental pollutant remediation

It has been reported that Pd nanoparticles were a little weak to bind to the dried microbial (yeast) surface, leading to the poor stability of the bio-supported catalysts. The objectives of the study are to construct stable Pd nanocatalysts supported on the dried yeast surface with the help of a tiny amount (<0.1 wt%) of reduced graphene oxide (Pd/yeast/rGO) and apply the catalysts in environmental pollutant remediation. The characterizations of the as-obtained Pd/yeast/rGO catalysts showed that reduced GO could cover Pd/yeast materials and prepare 15–21 nm Pd nanoparticles under acid and base media. The catalytic performance of the Pd/yeast/rGO catalyst was compared with that of control Pd/yeast catalysts without GO. The results revealed the kinetic constant K_app in the reduction of 4-nitrophenol of Pd/yeast/rGO catalysts could reach 3.6 × 10⁻² s⁻¹ without stirring during the reaction, which was 2.4 times higher than that of Pd/yeast catalysts, and the Pd/yeast/rGO catalysts kept a good stability even after being reused in seven cycles. Furthermore, the catalysts also showed quite good catalytic activities on CO oxidation and decolorization of dye methylene blue (MB). Thus, Pd/yeast/rGO catalysts were proven to be highly active and stable for environmental remediation and have the advantage that they can prevent the loss of noble metals and be prepared conveniently from discarded microorganisms.

Stable bio-supported Pd/yeast/rGO catalysts were prepared by covering with a tiny amount (<0.1 wt%) of GO based on a non-enzyme reduction method.

Highly sensitive electrochemical BPA sensor based on titanium nitride-reduced graphene oxide composite and core-shell molecular imprinting particles

A sensitive electrochemical sensor was proposed via combining molecular imprinting technique with the graphene material-doped titanium nitride. The novel graphene with 3-dimensional structure displayed more binding sites and better electrochemical properties. Moreover, this study focused on coating pyrrole with electrical conductivity on the surface of silica as a monomer, and BPA as the template. The interaction made specific detection possible, between monomer and template. With a series of characterizations and electrochemical measurements, CPE (carbon paste electrode)-contained TiN-rGO composite was proved to have conductivity improved. Also, the modified polymer performed well selectivity which reflected in that it was almost impervious to distractions. Under optimized conditions, a linear dependence was observed from 0.5 to 100 nmol L^-1 with a detection limit of 0.19 nmol L^-1. The sensor explicated outstanding repeatability via repetitive experiment with the RSD of 0.02%, while the results of stability experiment reached the RSD of 1.90%. Eventually, it was used to analyze BPA residues in 3 kinds of daily supplies. The results indicated the potential of the sensor in environmental detection prospectively.

Two-dimensional materials in biomedical, biosensing and sensing applications

Two-dimensional (2D) materials are at the forefront of materials research. Here we overview their applications beyond graphene, such as transition metal dichalcogenides, monoelemental Xenes (including phosphorene and bismuthene), carbon nitrides, boron nitrides along with transition metal carbides and nitrides (MXenes). We discuss their usage in various biomedical and environmental monitoring applications, from biosensors to therapeutic treatment agents, their toxicity and their utility in chemical sensing. We highlight how a specific chemical, physical and optical property of 2D materials can influence the performance of bio/sensing, improve drug delivery and photo/thermal therapy as well as affect their toxicity. Such properties are determined by crystal phases electrical conductivity, degree of exfoliation, surface functionalization, strong photoluminescence, strong optical absorption in the near-infrared range and high photothermal conversion efficiency. This review conveys the great future of all the families of 2D materials, especially with the expanding 2D materials' landscape as new materials emerge such as germanene and silicene.

Ultrasensitive photoelectrochemical aptasensor for diclofenac sodium based on surface-modified TiO2-FeVO4 composite

Herein, a photoelectrochemical (PEC) aptasensing platform was designed by integrating surface oxygen vacancy (OV) defects, Ti³⁺ self-doping, the heterojunction, and resonance energy transfer (RET) effect into one platform for the detection of diclofenac sodium (DCF). Briefly, OV defects were introduced on TiO₂ nanospheres with simultaneous Ti³⁺ self-doping, followed by a well-separated deposition of FeVO₄ nanoparticles on TiO₂ to obtain a Ti³⁺-O-TiO₂/FeVO₄ heterojunction. The surface modification of OVs, Ti³⁺ doping, and deposition of FeVO₄ were confirmed by SEM, XPS, EPR, DRS, and PEC measurements. The surface OVs and doping of Ti³⁺ species created a new donor (defect) energy level under the conduction band of TiO₂, which minimized the bandgap and thereby improved the visible light absorption of TiO₂. Moreover, the capture of photo-excited electrons by surface OVs could hinder the electron-hole recombination. Due to the intimate surface contact and perfect energy matching between TiO₂ and FeVO₄, the formation of heterojunction decreased the bandgap and facilitated the electron-hole separation of TiO₂. All these above events contributed to the enhancement of the PEC signals, which were then quenched by the RET effect between Ti³⁺-O-TiO₂/FeVO₄ and Au nanoparticle (AuNP)-labeled cDNA that had been attached to its complementary DCF aptamer on Ti³⁺-O-TiO₂/FeVO₄|ITO. The addition of target-DCF detached AuNP-labeled cDNA from the electrode to recover the photocurrent, resulting in a "signal-on" PEC aptasensor that exhibited a 0.1-500-nM linear range and a detection limit of 0.069 nM for DCF, attributed to the excellent amplification of the proposed aptasensing platform.

The Recent Development of Hybridization Chain Reaction Strategies in Biosensors

With the continuous development of biosensors, researchers have focused increasing attention on various signal amplification strategies to pursue superior performance for more applications. In comparison with other signal amplification strategies, hybridization chain reaction (HCR) as a powerful signal amplification technique shows its certain charm owing to nonenzymatic and isothermal features. Recently, on the basis of conventional HCR, this technique has been developed and improved rapidly, and a variety of HCR-based biosensors with excellent performance have been reported. Herein, we present a systematic and critical review on the research progress of HCR in biosensors in the last five years, including the newly developed HCR strategies such as multibranched HCR, migration HCR, localized HCR, in situ HCR, netlike HCR, and so on, as well as the combination strategies of HCR with isothermal signal amplification techniques, nanomaterials, and functional DNA molecules. By illustrating some representative works, we also summarize the advantage and challenge of HCR in biosensors, and offer a deep discussion of the latest progress and future development trends of HCR in biosensors.

Actively targeted gold nanoparticle composites improve behavior and cognitive impairment in Parkinson's disease mice

Parkinson's disease (PD) is characterized by motor and non-motor symptoms, primarily affecting dopaminergic neurons (DAergic neurons) in substantia nigra (SN). However, it is still very challenging to identify new drugs that not only inhibit motor dysfunction but also improve non-motor dysfunction. It has been identified as a potential PD treatment that the inhibition of α-syn aggregation could decrease the death of DAergic neurons in SN. In this study, we synthesized gold nanoparticle composites (NPs) that were loaded with plasmid DNA (pDNA) to inhibit α-syn expression. In vivo, our results showed that NPs improved tyrosine hydroxylase (TH) levels and decreased aggregation of α-syn in the SN. Additionally, NPs attenuated motor dysfunction and exploration ability declined. Moreover, NPs reversed the inhibition of long-term potentiation (LTP) and improved non-motor dysfunction in PD mice. These results indicated that NPs had significantly neuroprotective effects not only in motor, but also in non-motor dysfunction to PD mice, providing a new strategy for gene therapy in PD.

Mo-Based Layered Nanostructures for the Electrochemical Sensing of Biomolecules

Mo-based layered nanostructures are two-dimensional (2D) nanomaterials with outstanding characteristics and very promising electrochemical properties. These materials comprise nanosheets of molybdenum (Mo) oxides (MoO2 and MoO3), dichalcogenides (MoS2, MoSe2, MoTe2), and carbides (MoC2), which find application in electrochemical devices for energy storage and generation. In this feature paper, we present the most relevant characteristics of such Mo-based layered compounds and their use as electrode materials in electrochemical sensors. In particular, the aspects related to synthesis methods, structural and electronic characteristics, and the relevant electrochemical properties, together with applications in the specific field of electrochemical biomolecule sensing, are reviewed. The main features, along with the current status, trends, and potentialities for biomedical sensing applications, are described, highlighting the peculiar properties of Mo-based 2D-nanomaterials in this field.

Polychlorinated Biphenyl Electrochemical Aptasensor Based on a Diamond-Gold Nanocomposite to Realize a Sub-Femtomolar Detection Limit

Polychlorinated biphenyls (PCBs) with high toxicity, low lethal dose, and bioaccumulation have been inhibited for application in wide fields, and a highly efficient trace detection is thus greatly desirable. In this study, we produce dense Au-nanoparticles by twice sputtering and twice annealing (T-Au-NPs) on boron-doped diamond (BDD). The successful formation of T-Au-NPs/BDD nanocomposites was confirmed by scanning electron microscopy, X-ray diffraction, Raman spectroscopy, and X-ray photoelectron spectroscopy analysis. Based on T-Au-NPs/BDD, an electronic biosensor with aptamers is fabricated to detect trace polychlorinated biphenyl-77 (PCB-77) by electrochemical impedance. A good linear relationship in the range of femtomolar to micromolar and significantly low detection limit of sub-femtomolar level (0.32 fM) are realized based on the biosensor. The emphasis of this research lies in the key role of the diamond substrate in the biosensor. It is demonstrated that the biosensor has excellent sensitivity, specificity, stability, and recyclability, which are favorable for detecting the trace PCB-77 molecule. It is attributed to the important effect presented by the BDD substrate and the synergistic influence of T-Au-NPs combined with aptamers.

Cocaine detection using aptamer and molybdenum disulfide-gold nanoparticle-based sensors

Aim: The current work highlighted a novel colorimetric sensor based on aptamer and molybdenum disulfide (MoS₂)-gold nanoparticles (AuNPs) that was developed for cocaine detection with high sensitivity. Materials & methods: Due to the presence of the plasmon resonance band on the surface of AuNPs, AuNPs aggregated and the color was changed from red to blue after adding a certain concentration of NaCl. We used MoS₂ to optimize the sensing system of AuNPs. The folded conformation of the aptamer in combination with cocaine enhanced the salt tolerance of the MoS₂-AuNPs, effectively preventing their aggregation. Results & conclusion: The detection limit of cocaine was 7.49 nM with good selectivity. The method based on MoS₂-AuNPs colorimetry sensor is simple, quick, label-free and low cost.

Peptide-conjugated hemin/G-quadruplex as a versatile probe for "signal-on" electrochemical peptide biosensor

In this work, a novel "signal-on" electrochemical peptide biosensor based on peptide-conjugated hemin/G-quadruplex (DNAzyme-peptide) hybrid and rosebud-like MoSe₂@reduced graphene oxide (MoSe₂@rGO) nanocomposite, was developed for detection of prostate-specific antigen (PSA). Interestingly, the peptide not only served as recognition probe to detect PSA, but also acted as the enhancer to improve the enzyme activity of hemin/G4, which promoted the detection sensitivity. Up addition of PSA, Fe₃O₄-labeled DNAzyme-peptide probe was cleaved, followed by the magnetic separation. The cleaved DNAzyme-peptide was then captured onto the cysteine-modified electrode via the interaction between carboxyl groups of peptide and amino group of cysteine. A strong electrochemical signal was obtained from hemin and further was amplified by the enhanced electrocatalysis of DNAzyme-peptide. Compared to the original DNAzyme, DNAzyme-peptide exhibited more than 3-fold enhancement in signal amplification. And MoSe₂@rGO amplified the electrochemical signal due to its good conductivity and large surface area. So the proposed strategy detected PSA down to 0.3 fg/mL, and it showed the advantages of simplicity, low cost by avoiding the use of expensive protein enzyme and additional electroactive species. Therefore, the proposed biosensor potentially provided a very effective tool for early diagnosis of cancer by the detection of PSA.

Gold nanocubes embedded biocompatible hybrid hydrogels for electrochemical detection of H2O2

Smart electrochemical biosensors have emerged as a promising alternative analytical diagnostic tool in recent clinical practice. However, improvement in the biocompatibility and electrical conductivity of the biosensor matrix and the immobilization of various bioactive molecules such as enzymes still remain challenging. The present research reports the synthesis of a biocompatible hydrogel network and its integration with gold nanocubes (AuNCs) for developing a novel biosensor with improved functionality. The interpenetrating hydrogel network consist of biopolymers developed using graft co-polymerization of β-cyclodextrin (β-CD) and chitosan (CS). The novelty of this work is in integrating the CS-g-β-CD hydrogel network with conductive AuNCs for improving hydrogel conductivity, biosensor sensitivity and use of the material for a biocompatible sensor. The present protocol advances the state of the art for the utilization of biopolymeric hydrogels system in synergy with an enzymatic biosensing protocol for exclusively detecting hydrogen peroxide (H₂O₂). Immobilization of the mitochondrial protein, cytochrome c (cyt c) into the hydrogel nanocomposite matrix was performed via thiol cross-linking. This organic-inorganic hybrid nanocomposite hydrogel matrix exhibited high biocompatibility (RAW 264.7 and N2a cell lines), improved electrical conductivity to attain high sensitivity (1.2 mA mM^-1 cm^-2) and a low detection limit (15 × 10^-9 M) for H₂O₂.

Flap endonuclease-initiated enzymatic repairing amplification for ultrasensitive detection of target nucleic acids

A new isothermal nucleic acid amplification method termed FERA (Flap endonuclease-initiated Enzymatic Repairing Amplification) is developed for the ultrasensitive detection of target nucleic acids. In the FERA method, flap endonuclease (FEN) catalyzes the hydrolytic cleavage at the junction of single- and double-stranded DNAs which is formed only in the presence of target nucleic acids, and releases short oligonucleotides to promote the cyclic enzymatic repairing amplification (ERA) combined with FEN-based amplification. As a result, a large amount of single- and double-stranded DNAs are generated under the isothermal conditions, leading to the high fluorescence intensity from the SYBR I green dye. Relying on the powerful amplification method, we successfully determined the target nucleic acids with a limit of detection as low as 15.16 aM, which corresponds to approximately 180 molecules in 20 μL reaction volume, and verified the practical applicability by detecting long target nucleic acids derived from Chlamydia trachomatis.

Chronocoulometric aptamer based assay for staphylococcal enterotoxin B by target-triggered assembly of nanostructured dendritic nucleic acids on a gold electrode

A rapid and ultrasensitive method is described for the detection of staphylococcal enterotoxin B (SEB). It is based on the formation of a dendritic DNA superstructure by integrating (a) target-induced triggering of DNA release with (b) signal amplification by a hybridization chain reaction. Partially complementary pairing of aptamer and trigger DNA forms a duplex structure. The capture DNA is then placed on the surface of a gold electrode through gold-thiol chemistry. In the presence of SEB, the aptamer-target conjugate is compelled to form. This causes the release of trigger DNA owing to a strong competition with SEB. The trigger DNA is subsequently hybridized with the partial complementary sequences of the capture DNA to trigger HCR with three auxiliary DNA sequances (referred to as H1, H2, H3). Finally, the dendritic DNA superstructure is bound to hexaammineruthenium(III) cation by electrostatic adsorption and assembled onto the modified gold electrode. This produces an amplified electrochemical signal that is measured by chronocoulometry. Under optimal conditions, the charge difference increases linearly with the logarithm of the SEB concentrations in the range from 5 pg·mL^-1 to 100 ng·mL^-1 with a detection limit as low as 3 pg·mL^-1 (at S/N = 3). Graphical abstract An electrochemical switching strategy is presented for the sensitive detection of Staphylococcus enterotoxin B based on target-triggered assembly of dendritic nucleic acid nanostructures.

Electrochemical biosensor based on Se-doped MWCNTs-graphene and Y-shaped DNA-aided target-triggered amplification strategy

A highly sensitive electrochemical biosensor for detection of platelet-derived growth factor-BB (PDGF-BB) is developed by using Se-doped multi-walled carbon nanotubes (MWCNTs)-graphene hybrids as electrode supporting substrate, hemin/G-quadruplex as trace labels and Y-shaped DNA-aided target recycling as signal magnifier. The aptamer-containing hairpin probes were first immobilized on the electrode. When target PDGF-BB was added, the aptamer binded PDGF-BB to trigger catalytic assembly of two other hairpins to form many G-quadruplex Y-junction DNA structures, which released PDGF-BB to again bind the intact aptamer to initiate another assembly cycle. G-quadruplex/hemin complexes were produced when hemin was added to generate substantially amplified current output. The developed assay showed a linear range toward PDGF-BB from 0.1 pM to 10 nM with a detection limit of 27 fM (S/N = 3). The method showed excellent specificity and repeatability, and could be expediently applied for sensitive detection of other molecules by simply changing the aptamers.