Electroactive Au@Ag nanoparticles driven electrochemical sensor for endogenous H2S detection

Electrochemical Detection of Gasotransmitters: Status and Roadmap

Gasotransmitters, including nitric oxide (NO), carbon monoxide (CO), and hydrogen sulfide (H2S), are a class of gaseous, endogenous signaling molecules that interact with one another in the regulation of critical cardiovascular, immune, and neurological processes. The development of analytical sensing mechanisms for gasotransmitters, especially multianalyte mechanisms, holds vast importance and constitutes a growing area of study. This review provides an overview of electrochemical sensing mechanisms with an emphasis on opportunities in multianalyte sensing. Electrochemical methods demonstrate good sensitivity, adequate selectivity, and the most well-developed potential for the multianalyte detection of gasotransmitters. Future research will likely address challenges with sensor stability and biocompatibility (i.e., sensor lifetime and cytotoxicity), sensor miniaturization, and multianalyte detection in biological settings.

Construction of smartphone-adapted signal visualization platform for dual-mode detection of H2S based on integrated metal-organic framework nanoprobes

Hydrogen sulfide (H2S) is a toxic contaminant and has great influence on many physiological processes. Due to various pathophysiological roles and environmental pollution problems, it is necessary to construct and develop simple and portable monitoring sensors for the precise detection of H2S. Herein, we developed a smartphone-adapted dual-mode detection platform by integrating the colorimetric and photothermal imaging analysis into a metal-organic framework-based chip (ZIF-8/Cu). Due to the nanoconfinement effect of ZIF-8, small-sized plasmonic CuS could be in-situ formed during the detection procedure of H2S and endowed the chips with excellent photothermal properties. By constructing a smartphone-adapted photothermal imager, the metal-organic framework-based chip could achieve a portable photothermal imaging analysis of H2S. Moreover, as the formed CuS was a good peroxidase-like nanozyme, the chips could also be used to trigger the enzymic catalytic reaction toward the chromogenic reaction of 3,3',5,5'-tetramethylbenzidine (TMB)-H2O2, thus providing another colorimetric sensing mode by using a smartphone App. In this smartphone-adapted visualization platform, the portable chemosensors could simultaneously achieve double detection modes at one electrode, which provided a new pathway for the accurate detection of H2S and circumvented the false-positive or negative errors during the detection process. Besides, by using the finite difference time domain (FDTD) simulation method, the in-depth mechanism, including the plasmonic effect and spatial electromagnetic field distribution, was explored to provide a possible reason for the excellent sensing performance of the dual-mode visualization platform. This work provides a new insight into the construction of the accurate, portable and smart sensing platform in the visual screening of H2S.

Electrochemical sensor for hydrogen sulfide detection using electrocatalysis-assisted amplification and chemical reaction-mediated signal enhancement

An ultrasensitive electrochemical biosensing platform has been designed by combining electrocatalysis-assisted H2S amplification with a chemical reaction-mediated electrochemical signal-boosted system for H2S detection based on Cu-Mn(OH)2 hexagonal nanorings. The signal amplification is initiated by an electrocatalysis reaction that can grasp specific H2S substrates and further highly amplify electrochemical signals. Then, the unique chemical reaction is powered by copper ion and generates a large amount of electroactive CuxS products on the electrode surface, thus achieving the multiple amplification of H2S detection. Finally, the Cu-Mn(OH)2 loaded with plenty of electroactive CuxS can be captured on the electrode for further improving the electrochemical signal thus obtaining ultra-high sensitive determination of H2S. The established electrochemical biosensing platform displays a wide analytical range of 0.1 μM to 265 μM with a low detection limit of 0.096 μM. The satisfactory selectivity allows the electrochemical sensor to distinguish H2S from other interfering substances without any complicated pretreatment, even in complex tumor cell samples. Thus, our designed electrocatalysis-assisted amplification strategy offers a powerful analysis toolkit for the early determination of H2S-related disease in clinical diagnosis.

A fluorous-tag-assisted fluorescent probe for simple and selective detection of hydrogen sulfide: application for turbid dyeing solutions

Accurate hydrogen sulfide (H2S) detection has attracted much attention because its toxicity may affect aquatic environments and human health. However, recognizing H2S levels by conventional fluorescent probes in turbid wastewater has been challenging because the opaque environment interferes with their photophysical properties. To overcome this limitation, a fluorous-tagging strategy can be used for the development of fluorescent sensors to detect H2S in turbid solutions. The use of fluorescent probe assisted with fluorous-tag allowed for easy isolation of the probe using polytetrafluoroethylene (PTFE) material, while disturbing species were eliminated through a simple aqueous wash. This approach enabled the fluorescent probe to effectively quantify H2S, even in opaque solutions containing organic dyes that could interfere with fluorescence emission.

Plasmon-enhanced electroreduction activity of Au-AgPd Janus nanoparticles for ochratoxin a detection

Ochratoxin A (OTA) was a dangerous biological toxin, and would easily contaminate food and induced food safety problems. The development of electrochemical aptasensors by designing strong and anti-interfere electroactive labels could improve the sensitivity and accuracy of OTA detection. In this contribution, novel electroactive Au-AgPd Janus NPs were firstly synthesized and exhibited electroreduction signal at -0.4 V, owing to the reduction process of Pd²⁺. The electroreduction signal was amplified 1.5 times under local surface plasmon resonance (LSPR) excitation, which could improve the sensitivity of OTA detection. Plasmon-enhanced electroreduction principle of Au-AgPd Janus NPs was verified, which endowed electrochemical aptasensor with high accuracy and anti-interference ability for OTA detection. Au-AgPd Janus NPs served as electrochemical beacon achieved sensitive and accurate OTA detection with the limit of detection (LOD) of 0.98 pM. This work opens up new directions for the construction of electroactive heterostructures for the sensitive and accurate biotoxins electroanalytical applications.

Sustainable Collagen Blends with Different Ionic Liquids for Resistive Touch Sensing Applications

Considering the sustainable development goals to reduce environmental impact, sustainable sensors based on natural polymers are a priority as the large im plementation of these materials is required considering the Internet of Things (IoT) paradigm. In this context, the present work reports on sustainable blends based on collagen and different ionic liquids (ILs), including ([Ch][DHP], [Ch][TSI], [Ch][Seri]) and ([Emim][TFSI]), processed with varying contents and types of ILs in order to tailor the electrical response. Varying IL types and contents leads to different interactions with the collagen polymer matrix and, therefore, to varying mechanical, thermal, and electrical properties. Collagen/[Ch][Seri] samples display the most pronounced decrease of the tensile strength (3.2 ± 0.4 MPa) and an increase of the elongation at break (50.6 ± 1.5%). The best ionic conductivity value of 0.023 mS cm^-1 has been obtained for the sample with 40 wt % of the IL [Ch][Seri]. The functional response of the collagen-IL films has been demonstrated on a resistive touch sensor whose response depends on the ionic conductivity, being suitable for the next generation of sustainable touch sensing devices.

Review of Chemical Sensors for Hydrogen Sulfide Detection in Organisms and Living Cells

As the third gasotransmitter, hydrogen sulfide (H₂S) is involved in a variety of physiological and pathological processes wherein abnormal levels of H₂S indicate various diseases. Therefore, an efficient and reliable monitoring of H₂S concentration in organisms and living cells is of great significance. Of diverse detection technologies, electrochemical sensors possess the unique advantages of miniaturization, fast detection, and high sensitivity, while the fluorescent and colorimetric ones exhibit exclusive visualization. All these chemical sensors are expected to be leveraged for H₂S detection in organisms and living cells, thus offering promising options for wearable devices. In this paper, the chemical sensors used to detect H₂S in the last 10 years are reviewed based on the different properties (metal affinity, reducibility, and nucleophilicity) of H₂S, simultaneously summarizing the detection materials, methods, linear range, detection limits, selectivity, etc. Meanwhile, the existing problems of such sensors and possible solutions are put forward. This review indicates that these types of chemical sensors competently serve as specific, accurate, highly selective, and sensitive sensor platforms for H₂S detection in organisms and living cells.

Potentiometric nanosensor for real-time measurement of hydrogen sulfide in single cell

One potentiometric nanosensor for monitoring intracellular hydrogen sulfide (H₂S) with fast potential response, high selectivity and excellent antifouling properties was developed. This study constructs a powerful tool to real-time track the changes of intracellular H₂S in situ, promoting the future studies of physiologically relevant processes.

Electroactive and SERS-Active Ag@Cu2O NP-Programed Aptasensor for Dual-Mode Detection of Tetrodotoxin

Dual-mode nanotags with noninterference sensing signals improved the detection accuracy and sensitivity for the applications of tetrodotoxin (TTX) monitoring. Electroactive and surface-enhanced Raman scattering (SERS)-active Ag@Cu2O nanoparticles (NPs) were fabricated and displayed two electrooxidation signals at -0.13 and 0.17 V, attributed to the oxidization process of Cu+ and Ag0, respectively. Ag@Cu2O NPs were also found to exhibit stronger SERS performances than individual Ag NPs. The dielectric Cu2O shell with a large dielectric constant inhibited the attenuation of electromagnetic (EM) waves of Ag NPs, which strengthened the EM fields for SERS enhancement. The electron transfer from Ag to Cu2O to 4-aminothiophenol (4-ATP) also contributed to the SERS performances. Ag@Cu2O NPs were modified by TTX aptamers and assembled with MXene nanosheets (NSs) due to the large surface, good conductivity, and inherent Raman properties. The assemblies showed two-peaked electrooxidation signals and prominent SERS activity. An electrochemical detection curve was established by using the total peak intensity at -0.13 and 0.17 V as detection signals, and a ratiometric SERS detection curve was developed by applying the intensity at 1078 cm-1 (4-ATP) as the detection signal and 730 cm-1 (MXene NSs) as the reference signal. An electrochemical and SERS signal-programed dual-mode aptasensor was proposed for accurate TTX detection, with the limits of detection of 31.6 pg/mL for the electrochemical signal and 38.3 pg/mL for the SERS signal. The rational design of plasmonic metal-semiconductor heterogeneous nanocomposites had important prospects in establishing a multimodal biosensing platform for the quantitative and accurate detection of analytes in complex systems.

Stretchable Electrochemical Sensor Based on a Gold Nanowire and Carbon Nanotube Network for Real-Time Tracking Cell-Released H2S

Hydrogen sulfide (H₂S), as the third gas transporter in biological systems, plays a key role in the regulation of biological cells. Real-time detection of local H₂S concentration in vivo is an important and challenging task. Herein, we explored a novel and facile strategy to develop a flexible and transparent H₂S sensor based on gold nanowire (AuNW) and carbon nanotube (CNT) films embedded in poly(dimethylsiloxane) (PDMS) (AuNWs/CNTs/PDMS). Taking the advantage of the sandwich-like nanostructured network of AuNWs/CNTs, the prepared electrochemical sensing platform exhibited desirable electrocatalytic activity toward H₂S oxidation with a wide linear range (5 nM to 24.9 μM) and a low dete ction limit (3 nM). Furthermore, thanks to the good biocompatibility and flexibility of the sensor, HeLa cells can be cultured directly on the electrode, allowing real-time monitoring of H₂S released from cells under a stretched state. This work provides a versatile strategy for the construction of stretchable electrochemical sensors, which has potential applications in the study of H₂S-related signal mechanotransduction and pathological processes.

Dual-mode biosensing platform for sensitive and portable detection of hydrogen sulfide based on cuprous oxide/gold/copper metal organic framework heterojunction

Hydrogen sulfide (H2S) can not only be regarded as a critical gas signal transduction substance, but also its excess levels can lead to a range of diseases. Currently, the accurate analysis combined with electrochemical (EC) or photothermal (PT) technology for H2S in a complex biological system remains a significant challenge. Herein, an endogenous H2S-triggered heterojunction cuprous oxide/gold/copper metal organic framework (Cu2O/Au/HKUST-1) nanoprobe is designed for dual-mode EC- second near-infrared (NIR-II)/PT analysis in tumor cells with high sensitivity and simplicity. Dual-mode EC quantification - PT is achieved through "off-on" mode of EC and PT signals based on electronic transfer and biosynthesis via an in situ sulfuration reaction. Under the optimum conditions, the EC quantification mode for trace H2S exhibits a wide linear range and an excellent limit of detection of 0.1 μM. More importantly, the dual-mode can display the selective detection of trace H2S in living tumor cells because of the specific interaction between copper ion and H2S. These results provide a new EC-PT promising biosensing platform for noninvasive intelligent detection of H2S in living tumor cells.

Biosynthesis-mediated Ni-Fe-Cu LDH-to-sulfides transformation enabling sensitive detection of endogenous hydrogen sulfide with dual-readout signals

Hydrogen sulfide (H₂S) is a vital endogenous gas signal molecule undertaking numerous physiological functions such as biological regulation and cytoprotection. Herein, we developed an electrochemical (EC) and photothermal (PT) dual-readout signals method for H₂S detection based on a novel biosynthesis-mediated Ni-Fe-Cu LDH-to-sulfides transformation strategy. Interestingly, the Cu²⁺-based Ni-Fe LDH (Ni-Fe-Cu LDH) can act as the Cu²⁺ source to react with H₂S, resulting in the in-situ generation of Cu_xS on Ni-Fe-Cu LDH surfaces. Because of the EC signal and intrinsic near-infrared (NIR) PT conversion ability of Cu_xS under 808 nm laser irradiation, the obtained Cu_xS@Ni-Fe-Cu LDH is applied to stimulate EC signal and temperature readout. By this means, a dual-readout signal mode is established for H₂S detection. Under the optimum conditions, this combination of EC and PT methods displays a wide linear range for H₂S to 0.1 μM-90 μM and 50 μM-400 μM, respectively, with a low detection limit of 0.09 μM. In addition, the practicality of Ni-Fe-Cu LDH is verified by determination of endogenous H₂S in living cells. This work not only provides a promising application for H₂S diagnosis but also exhibits the new characteristic of Ni-Fe-Cu LDH nanomaterials as signal transduction tags.

Metal-Organic Framework UiO-66-Mediated Dual-Signal Ratiometric Electrochemical Sensor for microRNA Detection with DNA Walker Amplification

Electrochemical nanotags with strong signal input are necessary for a ratiometric electrochemical sensor to overcome the drawbacks of inaccurate detection results. In this paper, the metal-organic framework (MOF) UiO-66 was utilized as an electrochemical signal tag. A stable and strong current response at +0.9 V can be detected in neutral conditions. MicroRNA (miRNA) was employed as the model analyte. Herein, an enzyme-free DNA-walker-based ultrasensitive ratiometric electrochemical biosensor in combination with Zr MOF (UiO-66) signal tags to detect miRNA was demonstrated. In the presence of miRNA, the autonomous walker movement can be initiated by miRNA, leading to the release of biotin-modified fragments. Thus, streptavidin-labeled UiO-66 nanomaterials were not bound to the electrode, generating a low signal response of UiO-66 at +0.9 V. However, the current signal of electrolyte solution as reference at +0.2 V was increased due to the enhancement of electrode conductivity. This ratiometic sensor demonstrated high sensitivity, selectivity, and reproducibility. It can eliminate the disturbance of environmental factors and basic electrode characteristics, providing more accurate signals. A limit of detection (LOD) of 0.17 fM was achieved. Moreover, the method was also used to detect miRNA-21 spiked in real serum samples.

Deflection-based laser sensing platform for selective and sensitive detection of H2S using plasmonic nanostructures

Considering the severe hazards of abnormal concentration level of H₂S as an extremely toxic gas to the human body and due to the disability of olfactory system in sensing toxic level of H₂S concentration, a reliable, sensitive, selective and rapid method for the detection of H₂S is proposed and its efficacy is analyzed through simulation. The proposed system is based on the deflection of a laser beam in response to the temperature variations in its path. In order to provide selectivity and improve sensitivity, gold nanostructures were employed in the system. The selectivity was introduced based on the thiol-gold interactions and the sensitivity of the system was enhanced due to the modification of plasmon resonance behavior of gold nanostructures in response to gas adsorption. Results from our analysis demonstrate that compared with Au and SiO₂-Au, the Au nanomatryoshka structures (Au-SiO₂-Au) showed the highest sensitivity due to promoting higher deflections of the laser beam.

An indirect detection strategy-assisted self-cleaning electrochemical platform for in-situ and pretreatment-free detection of endogenous H2S from sulfate-reducing bacteria (SRB)

The endogenous hydrogen sulfide (H₂S) can be adopted as an indicator for the indirect detection of sulphate-reducing bacteria (SRB), which considered to be closely related to pipeline corrosion and human intestinal health. Unfortunately, the in-situ detection of endogenous H₂S from SRB in the complex culture medium still faces huge challenges. Besides nonspecific adsorption from the culture medium of SRB, the problem of electrode passivation by produced elemental sulfur during electrochemical detection processes of H₂S cannot be ignored. To address these challenges, herein a synergistic sensing platform based on self-cleaning electrode interface and indirect detection strategy (specific H₂S-induced chemical reaction) is developed. This indirect sensing strategy-assisted self-cleaning electrochemical platform showed a relatively good linear response toward H₂S in the range of 0.5 - 5 μM, and the corresponding limit of detection (LOD) was calculated to be 5.09 nM. More importantly, the satisfactory self-cleaning electrode interface in indirect detection system (with only a 4.10% decrease in signal over 50 electrochemical repeated cycles) showed the electrode surface not being disturbed by elemental sulfur. Furthermore, this good selectivity of the indirect detection strategy in combination with the reproducibility, stability, and antifouling activity of the self-cleaning interface, enabled a synergistic sensing platform to detect H₂S directly in the complex culture medium of SRB without time-consuming sample pretreatments. Moreover, this proposed construction strategy of synergetic sensing platform could be explored to other endogenous molecules in complex environment based on different antifouling materials and specific reactions.

Recent Advances in Touch Sensors for Flexible Wearable Devices

Many modern user interfaces are based on touch, and such sensors are widely used in displays, Internet of Things (IoT) projects, and robotics. From lamps to touchscreens of smartphones, these user interfaces can be found in an array of applications. However, traditional touch sensors are bulky, complicated, inflexible, and difficult-to-wear devices made of stiff materials. The touch screen is gaining further importance with the trend of current IoT technology flexibly and comfortably used on the skin or clothing to affect different aspects of human life. This review presents an updated overview of the recent advances in this area. Exciting advances in various aspects of touch sensing are discussed, with particular focus on materials, manufacturing, enhancements, and applications of flexible wearable sensors. This review further elaborates on the theoretical principles of various types of touch sensors, including resistive, piezoelectric, and capacitive sensors. The traditional and novel hybrid materials and manufacturing technologies of flexible sensors are considered. This review highlights the multidisciplinary applications of flexible touch sensors, such as e-textiles, e-skins, e-control, and e-healthcare. Finally, the obstacles and prospects for future research that are critical to the broader development and adoption of the technology are surveyed.

Waterproof Cellulose-Based Substrates for In-Drop Plasmonic Colorimetric Sensing of Volatiles: Application to Acid-Labile Sulfide Determination in Waters

The present work reports on the assessment of widely available waterproof cellulose-based substrates for the development of sensitive in-drop plasmonic sensing approaches. The applicability of three inexpensive substrates, namely, Whatman 1PS, polyethylene-coated filter paper, and tracing paper, as holders for microvolumes of colloidal solutions was evaluated. Waterproof cellulose-based substrates demonstrated to be highly convenient platforms for analytical purposes, as they enabled in situ generation of volatiles and syringeless drop exposure unlike conventional single-drop microextraction approaches and can behave as sample compartments for smartphone-based colorimetric sensing in an integrated way. Remarkably, large drop volumes (≥20 μL) of colloidal solutions can be employed for enrichment processes when using Whatman 1PS as holder. In addition, the stability and potential applicability of spherical, rod-shaped, and core-shell metallic NPs onto waterproof cellulose-based substrates was evaluated. In particular, Au@AgNPs showed potential for the colorimetric detection of in situ generated H2S, I2, and Br2, whereas AuNRs hold promise for I2, Br2, and Hg0 colorimetric sensing. As a proof of concept, a smartphone-based colorimetric assay for determination of acid-labile sulfide in environmental water samples was developed with the proposed approach taking advantage of the ability of Au@AgNPs for H2S sensing. The assay showed a limit of detection of 0.46 μM and a repeatability of 4.4% (N = 8), yielding satisfactory recoveries (91-107%) when applied to the analysis of environmental waters.

H2S sensing under various humidity conditions with Ag nanoparticle functionalized Ti3C2Tx MXene field-effect transistors

Despite the critical need to monitor H₂S, a hazardous gas, in environmental and medical settings, there are currently no reliable methods for rapid and sufficiently discriminative H₂S detection in real-world humid environments. Herein, targeted hybridizing of Ti₃C₂T_x MXene with Ag nanoparticles on a field-effect transistor (FET) platform has led to a step change in MXene sensing performance down to ppb levels, and enabled the very high selectivity and fast response/recovery time under room temperature for H₂S detection in humid conditions. For the first time, we present a novel relative humidity (RH) self-calibration strategy for the accurate detection of H₂S. This strategy can eliminate the influence of humidity and enables the accurate quantitative detection of gas in the total RH range. We further elucidate that the superior H₂S sensing performance is attributed to the electron and chemical sensitization effects. This study opens new avenues for the development of high-performance MXene-based sensors and offers a viable approach for addressing real-world humidity effect for gas sensors generally.

C60Br24/SWCNT: A Highly Sensitive Medium to Detect H2S via Inhomogeneous Carrier Doping

H₂S is a toxic and corrosive gas, whose accurate detection at sub-ppm concentrations is of high practical importance in environmental, industrial, and health safety applications. Herein, we propose a chemiresistive sensor device that applies a composite of single-walled carbon nanotubes (SWCNTs) and brominated fullerene (C₆₀Br₂₄) as a sensing component, which is capable of detecting 50 ppb H₂S even at room temperature with an excellent response of 1.75% in a selective manner. In contrast, a poor gas response of pristine C₆₀-based composites was found in control measurements. The experimental results are complemented by density functional theory calculations showing that C₆₀Br₂₄ in contact with SWCNTs induces localized hole doping in the nanotubes, which is increased further when H₂S adsorbs on C₆₀Br₂₄ but decreases in the regions, where direct adsorption of H₂S on the nanotubes takes place due to electron doping from the analyte. Accordingly, the heterogeneous chemical environment in the composite results in spatial fluctuations of hole density upon gas adsorption, hence influencing carrier transport and thus giving rise to chemiresistive sensing.

Phenolic water toxins: redox mechanism and method of their detection in water and wastewater

Phenolic pollutants are highly toxic and persistent in the environment. Their efficient detection is a pressing social demand. In this regard we introduce a novel ultrasensitive electroanalytical platform for the individual and synchronized detection of three phenolic isomers commonly known as hydroquinone (HQ), resorcinol (RC), and catechol (CC). The sensing device consists of a glassy carbon electrode (GCE) modified with functionalized carbon nanotubes (fCNTs) and gold-silver (Au-Ag NPs) bimetallic nanoparticles. The sandwiched scaffold represented as fCNTs/Au-Ag NPs/fCNTs/GCE efficiently senses HQ, RC, and CC with detection limits of 28.6 fM, 36.5 fM and 42.8 fM respectively. The designed sensor is more promising than reported sensors for phenolic toxins in the context of high sensitivity, selectivity, and rapid responsiveness. The designed sensor also shows the qualities of stability, reproducibility, reliability, and selective recognition capacity for target analytes in multiple real water samples. Moreover, computational calculations explain the function of the electrode modifier in facilitating charge transfer between the transducer and analytes.

RuCu Cage/Alloy Nanoparticles with Controllable Electroactivity for Specific Electroanalysis Applications

Electrochemical nanotags with controllable and multiresponse electroactivity have a great capacity for overcoming the drawbacks of limited target monitoring and inaccurate detection results for electrochemical sensors. In this contribution, double electro-oxidative Ru and Cu metals were integrated into RuCu nanostructures for the generation of dual electro-oxidative signals. A facial approach was proposed for the controllable fabrication of RuCu cage nanoparticles (NPs) and RuCu alloy NPs by simply adjusting the pH value of the reaction system. RuCu cage NPs and RuCu alloy NPs demonstrated inherent different electro-oxidative responses owing to the remarkable distinction of structures with different metal valences. RuCu cage NPs showed a single electro-oxidization peak at 0.84 V, assigned to the exposure of more Ru⁰ electroactive sites on the hollow cage structures. RuCu alloy NPs illustrated dual electro-oxidization peak at 0.84 and -0.16 V, attributing to the presence of Ru⁰ and Cu⁺ electroactive sites on the alloy structures, respectively. RuCu cage NPs and RuCu alloy NPs served as specific electroactive tags, achieving the selective monitoring of Na₂S and ratiometric electrochemical detection of xanthine in monosodium glutamate, respectively. The limits of detection were as low as 27 pM for Na₂S and 70 nM for xanthine. The rational design of multimetal nanostructures holds enormous potential for the generation of multiresponse electroactivity with the impetus for exploring the capacity of specific electrochemical sensing.

Electrochemical sensing platform for the simultaneous femtomolar detection of amlodipine and atorvastatin drugs

The development of a proficient and ultra-high sensitive functionalized electrode for accurate analysis of drugs is a long-standing challenge. Herein, we report an electrochemical nanocomposite scaffold, comprising of silver nanoparticles integrated with functionalized carbon nanotubes (COOH-CNTs/Ag/NH₂-CNTs) for the simultaneous quantification of two widely used amlodipine (AM) and atorvastatin (AT) drugs. The sandwiched nanocomposite materials were thoroughly characterized morphologically and structurally. The nanocomposite COOH-CNTs/Ag/NH₂-CNTs immobilized over glassy carbon electrode catalyzed electron transfer reactions at the electrode–electrolyte interface and facilitated detection of targeted drugs, as revealed by the significant decrease in oxidation potentials at 879 mV and 1040 mV and improved current signals. Electrochemical characterization and testing show that the functionalized porous architecture with a large effective surface area is a promising scaffold for the sensing of a binary mixture of AM and AT with limits of detection in the femtomolar range (77.6 fM, and 83.2 fM, respectively). Besides, the specificity, stability, and reliability of the electrochemical sensing platform in simple and complex biological and pharmaceutical samples with high percentage recoveries highlight its scope for practical applications. Computational studies supported the experimental outcomes and offered insights about the role of modifier in facilitating electron transfer between transducer and analytes.

Development of an ultra-sensitive electrochemical platform for the simultaneous detection of two high blood pressure drugs.

Heterostructural (Sr0.6Bi0.305)2Bi2O7/ZnO for novel high-performance H2S sensor operating at low temperature

Exploring novel sensing materials enabling selective discrimination of trace ambient H₂S at lower temperature is of utmost importance for diverse practical applications. Herein, heterostructural (Sr_0.6Bi_0.305)₂Bi₂O₇/ZnO (SBO/ZnO) nanomaterials were proposed. Synergetic effect of promoting analyte adsorption (via multiplying oxygen vacancy defects) and reversible sulfuration-desulfuration reaction induced unique band alignment among SBO/ZnO/ZnS, contributes to the sensitive and selective response toward H₂S molecules. Novel SBO/ZnO (10%) sensor possesses excellent sensing H₂S performances, including a high response (107.6 for 10 ppm), low limit of detection of 20 ppb, good selectivity and long-term stability. Together with the merits of low operation temperature of 75 °C and weak humidity dependence (endowed by the hydrophobic SBO), present heterostructural SBO/ZnO sensor paves the way for the practical monitoring of trace H₂S pollutants in diverse workplaces including petroleum and natural gas industries.

Flexible wearable sensors - an update in view of touch-sensing

Nowadays, much of user interface is based on touch and the touch sensors have been common for displays, Internet of things (IoT) projects, or robotics. They can be found in lamps, touch screens of smartphones, or other wide arrays of applications as well. However, the conventional touch sensors, fabricated from rigid materials, are bulky, inflexible, hard, and hard-to-wear devices. The current IoT trend has made these touch sensors increasingly important when it added in the skin or clothing to affect different aspects of human life flexibly and comfortably. The paper provides an overview of the recent developments in this field. We discuss exciting advances in materials, fabrications, enhancements, and applications of flexible wearable sensors under view of touch-sensing. Therein, the review describes the theoretical principles of touch sensors, including resistive, capacitive, and piezoelectric types. Following that, the conventional and novel materials, as well as manufacturing technologies of flexible sensors are considered to. Especially, this review highlights the multidisciplinary approaches such as e-skins, e-textiles, e-healthcare, and e-control of flexible touch sensors. Finally, we summarize the challenges and opportunities that use is key to widespread development and adoption for future research.

Electroactive Cu2O nanocubes engineered electrochemical sensor for H2S detection

An electrochemical sensor was proposed for the detection of hydrogen sulfide (H₂S) at room temperature, by using electroactive Cu₂O nanocubes (NCs) as an electrochemical beacon. Electroactive Cu₂O NCs were synthesized on the surface of reduced graphene oxide (rGO)/Fe₃O₄ nanosheets (NSs) due to the good electronic conductivity and well-responded magnetic responses. The fabricated rGO/Fe₃O₄/Cu₂O NSs not only showed electrochemical oxidization peak at -0.1 V from Cu₂O NCs, and could be served as sensitive electrochemical beacon for the simple modification on magnetic electrodes in the applications. The unique redox reaction between Cu₂O NCs and H₂S enabled the transformation of Cu₂O NCs to Cu₉S₈ NCs, resulting in decreased electroxidation responses at -0.1 V. The constructed electrochemical platform had a limit of detection (LOD) of 230 pM and a detection range of 500 pM-100 μM. The simple and cheap electrochemical sensor developed in this paper showed potential application for H₂S detection.

A highly sensitive and adjustable colorimetric assay of hydrogen sulfide by signal amplification based on G-quadruplex-Cu2+ peroxidase mimetics

This work reports the first example of a colorimetric H2S sensor constructed through G-quadruplex-Cu2+ (G4-Cu2+) peroxidase mimetics employing Cu2+ ions and G-rich DNA with signal amplification. In the hydrogen peroxide (H2O2)-mediated oxidation of 3,3',5,5'-tetramethylbenzidine (TMB), the catalytic capacity of Cu2+ can be greatly improved in the presence of 22AG DNA, where 22AG DNA acts as a signal amplifier. However, G4-Cu2+ peroxidase mimetics lose their catalytic abilities after reacting with H2S. This is employed to develop a colorimetric assay of H2S without complex synthesis and instrumentation, with a linear range from 0.01 μM to 150 μM and a detection limit of 7.5 nM. The sensitivity of the sensor can also be adjusted by changing the concentration of Cu2+. Moreover, the developed sensor is successfully applied for the quantitative determination of H2S in human serum samples.

Highly Selective and Sensitive Detection of Hydrogen Sulfide by the Diffraction Peak of Periodic Au Nanoparticle Array with Silver Coating

The two-dimensional (2D) periodic Au nanosphere array with silver coating was prepared by using a colloidal monolayer template to obtain a Au nanosphere array and subsequently depositing silver thin coating on it, which could be used as an optical sensor to effectively detect H₂S. Such periodic Au nanosphere array with silver coating displayed a surface plasmonic resonance (SPR) peak and an optical diffraction peak. Compared with the SPR peak, the diffraction peak, originated from the periodic arrangements of the obtained array, demonstrated a more sensitive optical change to detect H₂S with a significant redshift as the H₂S concentration increased. It was attributed to the increase of the refractive index of the environment around the Au nanosphere arrays with silver coating due to the partial formation of Ag₂S after detecting H₂S. Furthermore, the H₂S sensor based on the change of the optical diffraction peak, showed an excellent selectivity and it was very sensitive to detect H₂S from 2 to 30 μM. This method was investigated by the analysis in H₂S-spiked blood samples, which indicates that the method has the potential to detect H₂S in blood samples. The presented work provides a new strategy of utilizing the optical diffraction peak of the periodic array to develop promising sensors.

Synthesizing of a nanocomposite based on the formation of silver nanoparticles on fumed silica to develop an electrochemical sensor for carbendazim detection

In this study, a nanocomposite was synthesized via the formation of silver nanoparticles on fumed silica (FS@Ag) to prepare an electrochemical sensor for the determination of carbendazim (CBZ), a common pesticide. The electrochemical sensor was designed by the combination of the carbon paste electrode (CPE) with the FS@Ag nanocomposite. Based on the electrochemical sensor prepared here, a voltammetric method was developed for the determination of CBZ in water and food samples. Characterization of the nanocomposite was conducted by X-ray diffraction, scanning electron microscopy, and energy-dispersive X-ray analyses. Modified electrodes were also electrochemically characterized via cyclic voltammetry and electrochemical impedance spectroscopy analyses. The FS@Ag showed electrocatalytic activity on the electrochemical oxidation of CBZ via increasing the peak currents tremendously. With the proposed method, a very low limit of detection (9.4 × 10^-10 M) and a wide linear range (5.0 × 10^-8 M - 3.0 × 10^-6 M) were obtained for CBZ. The slope of the calibration line obtained with CPE/15FS@Ag was 194-times higher than that of bare CPE, indicating the high sensitivity of the electrochemical sensor. The performance of the electrochemical sensor has been investigated in real samples such as river water, tomato juice, orange juice, and apple juice samples. The results reveal that the electrochemical sensor prepared here can be used as an alternative to current analytical methods used for the quantification of CBZ.

Dual mode electrochemical-photoelectrochemical sensing platform for hydrogen sulfide detection based on the inhibition effect of titanium dioxide/bismuth tungstate/silver heterojunction

A novel dual mode sensing platform is constructed for highly selective detection of H₂S, attributing to the efficient electrochemical (EC) and photoelectrochemical (PEC) signal responses of the TiO₂/Bi₂WO₆/Ag heterojunction. On the one hand, TiO₂/Bi₂WO₆/Ag heterojunction with excellent catalytic performance for the reduction of H₂O₂ could be employed act as a probe, providing a remarkable EC response through an amperometric i-t method. On the other hand, this hybrid provides a photoelectric beacon with a favorable energy-band configuration. More interestingly, the EC and PEC responses of the functionalized electrodes are proportionately decreased in response to the generation of Bi₂S₃ and Ag₂S nanoparticles upon exposure to sulfide ions. The decreased EC and PEC signals could be ascribed to the poor catalytic properties and the recombination of photoexcited electron - hole pairs of the Bi₂S₃ and Ag₂S. Under the optimal conditions, the dual mode sensor exhibits a wide linear response in the range from 0.5 μM to 300 μM with a detection limit of 0.08 μM for the detection of H₂S. Enabled by this unique sensitization mechanism, the proposed sensing platform displays an excellent analytical performance with good selectivity, reproducibility and stability, which providing an alternative pathway of H₂S detecting in practical application.

Recent Trends in Electrochemical Sensors for Vital Biomedical Markers Using Hybrid Nanostructured Materials

This work provides a succinct insight into the recent developments in electrochemical quantification of vital biomedical markers using hybrid metallic composite nanostructures. After a brief introduction to the biomarkers, five types of crucial biomarkers, which require timely and periodical monitoring, are shortlisted, namely, cancer, cardiac, inflammatory, diabetic and renal biomarkers. This review emphasizes the usage and advantages of hybrid nanostructured materials as the recognition matrices toward the detection of vital biomarkers. Different transduction methods (fluorescence, electrophoresis, chemiluminescence, electrochemiluminescence, surface plasmon resonance, surface-enhanced Raman spectroscopy) reported for the biomarkers are discussed comprehensively to present an overview of the current research works. Recent advancements in the electrochemical (amperometric, voltammetric, and impedimetric) sensor systems constructed with metal nanoparticle-derived hybrid composite nanostructures toward the selective detection of chosen vital biomarkers are specifically analyzed. It describes the challenges involved and the strategies reported for the development of selective, sensitive, and disposable electrochemical biosensors with the details of fabrication, functionalization, and applications of hybrid metallic composite nanostructures.

Competitive-Type Pressure-Dependent Immunosensor for Highly Sensitive Detection of Diacetoxyscirpenol in Wheat via Monoclonal Antibody

Diacetoxyscirpenol (DAS) is a type A trichothecene mycotoxin with low molecular weight, and with respect to its toxicity and the occurrence in food and feed, it is known as a potential risk for public and animal health. In the present study, first, a sensitive and specific monoclonal antibody (5E7) was developed. Then, the antibody was applied to develop a competitive-type pressure-dependent immunosensor (CTPDI). The Au@PtNP was synthesized and labeled with goat antimouse antibody (Au@PtNPs-IgG). Finally, the concentration of DAS was negatively correlated with the pressure signal. In the presence of optimal conditions, matrix-matched calibration curves were plotted for wheat samples, in which an optimal IC50 value (half maximal inhibitory concentration) of 3.08 ng/g was achieved. The CTPDI was further applied to detect natural and blind wheat samples, and validation was carried out by liquid chromatography-tandem mass spectrometry. The results showed that CTPDI was highly appropriate and accurate for detection of DAS in wheat.

An electrochemical sensing platform amplified with a Au@Ag nanoparticle-decorated three-dimensional N-doped graphene aerogel for ultrasensitive determination of baicalein

A novel electrochemical method for highly sensitive determination of baicalein was developed with Au@Ag/3DNGA as signal amplifier.

Understanding metal-enhanced fluorescence and structural properties in Au@Ag core-shell nanocubes

Au@Ag core–shell structures have received particular interest due to their localized surface plasmon resonance properties and great potential as oxygen reduction reaction catalysts and building blocks for self-assembly. In this study, Au@Ag core–shell nanocubes (Au@AgNCs) were fabricated in a facile manner via stepwise Ag reduction on Au nanoparticles (AuNPs). The size of the Au@AgNCs and their optical properties can be simply modulated by changing the Ag shell thickness. Structural characterization has been carried out by TEM, SAED, and XRD. The metal-induced fluorescence properties of probe molecules near the Au@AgNCs were measured during sedimentation of the Au@AgNCs. The unique ring-like building block of Au@AgNCs has dual optical functions as a fluorescence quencher or fluorescence enhancement medium depending on the assembled regions.

The unique ring-like building block of Au@AgNCs has dual optical functions as a fluorescence quencher and fluorescence enhancement medium.

Facile synthesis of core-shell CuS-Cu2S based nanocomposite for the high-performance glucose detection

Glucose detection is of great importance for the medical diagnosis, food biotechnology and pharmaceutical analysis. In this study, we synthesized a core-shell CuS-Cu₂S decorated carbon nanotube-graphene nanocomposite via a facile hydrothermal method. It exhibits great sensing performance towards glucose with wide linear range ranging from 0.001 to 2 mM, ultra-sensitivity of 1923 μA·cm^-2·mM^-1 and 0.33 μM detection limit in alkaline solutions. The excellent electrocatalytic activity originates from the synergistic effect between heterogeneous copper sulfides structures and carbon nanomaterials. Besides, the fabricate sensor also has great durability, selectivity and great potential for practical applications.

Gas Sensing with Nanoplasmonic Thin Films Composed of Nanoparticles (Au, Ag) Dispersed in a CuO Matrix

Magnetron sputtered nanocomposite thin films composed of monometallic Au and Ag, and bimetallic Au-Ag nanoparticles, dispersed in a CuO matrix, were prepared, characterized, and tested, which aimed to find suitable nano-plasmonic platforms capable of detecting the presence of gas molecules. The Localized Surface Plasmon Resonance phenomenon, LSPR, induced by the morphological changes of the nanoparticles (size, shape, and distribution), and promoted by the thermal annealing of the films, was used to tailor the sensitivity to the gas molecules. Results showed that the monometallic films, Au:CuO and Ag:CuO, present LSPR bands at ~719 and ~393 nm, respectively, while the bimetallic Au-Ag:CuO film has two LSPR bands, which suggests the presence of two noble metal phases. Through transmittance-LSPR measurements, the bimetallic films revealed to have the highest sensitivity to the refractive index changes, as well as high signal-to-noise ratios, respond consistently to the presence of a test gas.

Smartphone Nanocolorimetric Determination of Hydrogen Sulfide in Biosamples after Silver-Gold Core-Shell Nanoprism-Based Headspace Single-Drop Microextraction

In this work, the sensitive detection of hydrogen sulfide (H₂S) was realized at low cost and high efficiency through the application of silver-gold core-shell nanoprism (Ag@Au-np) combined with headspace single-drop microextraction (HS-SDME). After SDME, smartphone nanocolorimetry (SNC), with the aid of a smartphone camera and color picker software, was used to detect and quantify the H₂S. The method took advantage of the inhibition of the ultraviolet-visible (UV-vis) signal caused by H₂S etching of the Ag@Au-np preadded to the SDME solvent to measure the H₂S concentration. The coating of the gold layer not only ensured the high stability of the nanomaterial but also enhanced the selectivity toward H₂S. The HS-SDME method was simple to process and required only a droplet of solvent for analysis to be realized. This HS-SDME-SCN approach exhibited a calibration graph linearity of between 0.1 and 100 μM and a limit of detection of 65 nM (relative standard deviations of N% ( n = 3) < 4.80). A comparison with UV-vis spectrophotometry was conducted. The practical applicability of HS-SDME-SNC was successfully demonstrated by determining H₂S in genuine biosamples (egg and milk).

Ag/CdO NP-Engineered Magnetic Electrochemical Aptasensor for Prostatic Specific Antigen Detection

A simple magnetic electrochemical aptasensor was established for the detection of prostatic specific antigen (PSA). Ag/CdO nanoparticles (NPs) were fabricated and exhibited strong electroreduction peaks at -1.07 V, attributing to the electron transfer from Cd²⁺ to Cd⁰ and the superior electron transportation of Ag. Aptamer-modified Ag/CdO NPs were assembled on the surface of superparamagnetic Fe₃O₄/graphene oxide nanosheets (GO/Fe₃O₄ NSs) through the hydrophobic and π-π stacking interaction of aptamers and GO NSs. These assemblies possessed superior electroactive properties, efficient electron transfer, and superparamagnetic response and could serve as sensing units for PSA detection with the aid of a magnetic electrode. With increasing concentrations of PSA, the high affinity of aptamers to PSA enabled the dissociation of Ag/CdO NPs from GO/Fe₃O₄ NSs, decreasing the intensity of electroreduction peaks. The Ag/CdO NP-engineered magnetic electrochemical aptasensor achieved sensitive and accurate detection of PSA in the range of 50 pg/mL to 50 ng/mL. The limit of detection (LOD) was as low as 28 pg/mL. This developed protocol can be extended to a large set of strong electroactive labels for reliable tumor biomarker detection with high sensitivity and specificity.