A dual signal-on photoelectrochemical immunosensor for sensitively detecting target avian viruses based on AuNPs/g-C3N4 coupling with CdTe quantum dots and in situ enzymatic generation of electron donor

Signal amplification strategies in photoelectrochemical sensing of carcinoembryonic antigen

Early detection of cancer markers is critical for cancer diagnosis and cancer therapy since these markers may indicate cancer risk, incidence, and disease prognosis. Carcinoembryonic antigen (CEA) is a type of non-specific and broad-spectrum cancer biomarker commonly utilized for early cancer diagnosis. Moreover, it serves as an essential tool to assess the efficacy of cancer treatment and monitor tumor recurrence as well as metastasis, thus garnering significant attention for precise and sensitive CEA detection. In recent years, photoelectrochemical (PEC) techniques have emerged as prominent methods in CEA detection due to the advantages of PEC, such as simple equipment requirements, cost-effectiveness, high sensitivity, low interference from background signals, and easy of instrument miniaturization. Different signal amplification methods have been reported in PEC sensors for CEA analysis. Based on these, this article reviews PEC sensors based on various signal amplification strategies for detection of CEA during the last five years. The advantages and drawbacks of these sensors were discussed, as well as future challenges.

Micro- and nanosystems for the detection of hemorrhagic fever viruses

Hemorrhagic fever viruses (HFVs) are virulent pathogens that can cause severe and often fatal illnesses in humans. Timely and accurate detection of HFVs is critical for effective disease management and prevention. In recent years, micro- and nano-technologies have emerged as promising approaches for the detection of HFVs. This paper provides an overview of the current state-of-the-art systems for micro- and nano-scale approaches to detect HFVs. It covers various aspects of these technologies, including the principles behind their sensing assays, as well as the different types of diagnostic strategies that have been developed. This paper also explores future possibilities of employing micro- and nano-systems for the development of HFV diagnostic tools that meet the practical demands of clinical settings.

Progress in Electrochemical Immunosensors with Alkaline Phosphatase as the Signal Label

Electrochemical immunosensors have shown great potential in clinical diagnosis, food safety, environmental protection, and other fields. The feasible and innovative combination of enzyme catalysis and other signal-amplified elements has yielded exciting progress in the development of electrochemical immunosensors. Alkaline phosphatase (ALP) is one of the most popularly used enzyme reporters in bioassays. It has been widely utilized to design electrochemical immunosensors owing to its significant advantages (e.g., high catalytic activity, high turnover number, and excellent substrate specificity). In this work, we summarized the achievements of electrochemical immunosensors with ALP as the signal reporter. We mainly focused on detection principles and signal amplification strategies and briefly discussed the challenges regarding how to further improve the performance of ALP-based immunoassays.

The Collision between g-C3 N4 and QDs in the Fields of Energy and Environment: Synergistic Effects for Efficient Photocatalysis

Recently, graphitic carbon nitride (g-C₃ N₄ ) has attracted increasing interest due to its visible light absorption, suitable energy band structure, and excellent stability. However, low specific surface area, finite visible light response range (<460 nm), and rapid photogenerated electron-hole (e^- -h⁺ ) pairs recombination of the pristine g-C₃ N₄ limit its practical applications. The small size of quantum dots (QDs) endows the properties of abundant active sites, wide absorption spectrum, and adjustable bandgap, but inevitable aggregation. Studies have confirmed that the integration of g-C₃ N₄ and QDs not only overcomes these limitations of individual component, but also successfully inherits each advantage. Encouraged by these advantages, the synthetic strategies and the fundamental of QDs/g-C₃ N₄ composites are briefly elaborated in this review. Particularly, the synergistic effects of QDs/g-C₃ N₄ composites are analyzed comprehensively, including the enhancement of the photocatalytic performance and the avoidance of aggregation. Then, the photocatalytic applications of QDs/g-C₃ N₄ composites in the fields of environment and energy are described and further combined with DFT calculation to further reveal the reaction mechanisms. Moreover, the stability and reusability of QDs/g-C₃ N₄ composites are analyzed. Finally, the future development of these composites and the solution of existing problems are prospected.

Recent advances in immunoassay technologies for the detection of human coronavirus infections

Severe acute respiratory syndrome coronavirus-2 (SARS-CoV-2) is the seventh coronavirus (CoV) that has spread in humans and has become a global pandemic since late 2019. Efficient and accurate laboratory diagnostic methods are one of the crucial means to control the development of the current pandemic and to prevent potential future outbreaks. Although real-time reverse transcription-polymerase chain reaction (rRT-PCR) is the preferred laboratory method recommended by the World Health Organization (WHO) for diagnosing and screening SARS-CoV-2 infection, the versatile immunoassays still play an important role for pandemic control. They can be used not only as supplemental tools to identify cases missed by rRT-PCR, but also for first-line screening tests in areas with limited medical resources. Moreover, they are also indispensable tools for retrospective epidemiological surveys and the evaluation of the effectiveness of vaccination. In this review, we summarize the mainstream immunoassay methods for human coronaviruses (HCoVs) and address their benefits, limitations, and applications. Then, technical strategies based on bioinformatics and advanced biosensors were proposed to improve the performance of these methods. Finally, future suggestions and possibilities that can lead to higher sensitivity and specificity are provided for further research.

Photoelectrochemical Biosensor for Histone Deacetylase Sirt1 Detection Based on Polyaspartic Acid-Engaged and Triggered Redox Cycling Amplification and Enhanced Photoactivity of BiVO4 by Gold Nanoparticles and SnS2

A photoelectrochemical (PEC) biosensor was established for histone deacetylase Sirt1 detection based on the polyaspartic acid (PASP)-mediated redox cycling amplification and Sirt1 catalysis deacetylation-triggered recognition of the deacetylated substrate peptide, using PASP as the recognition reagent. After BiVO₄ was composited with gold nanoparticles and SnS₂, the photoactivity of the composite was greatly enhanced due to the matched energy band structure. Under the catalysis of Sirt1 enzyme, the acetylated substrate peptide was deacetylated to obtain a positive peptide, which was recognized by negative PASP. In addition to the recognition function, PASP also played other triple roles. First, PASP interacted with the positive peptide to form a double-stranded structure, which led to the electrode interface changing from irregular to regular, resulting in an improved PEC response. Second, PASP was involved into redox cycle amplification due to its reduction to dehydroascorbic acid. Further, it was used for repeated preparation of ascorbic acid to provide electron donors. This process enhanced the PEC response. Third, based on the matched energy band with BiVO₄, PASP effectively improved the photoactivity of BiVO₄. With multiplex signal amplification, the PEC biosensor showed a wide linear range (1.83-1830 pM) and high detection sensitivity with a low detection limit of 0.732 pM (S/N = 3). The applicability of this method was evaluated by studying the effects of a known inhibitor of nicotinamide and the heavy metal ions of Cd²⁺ and Pb²⁺ on Sirt1 enzyme activity, and the results showed that this method not only provided a new platform for screening Sirt1 enzyme inhibitors but also provided new biomarkers for evaluating the ecotoxicological effects of environmental pollutants.

A Rapid, Fluorescence Switch-On Biosensor for Early Diagnosis of Sorghum Mosaic Virus

For the first time, a nanobiosensor was established for Sorghum mosaic virus (SrMV) detection. The biosensor consists of cadmium telluride quantum dots (CdTe QDs) conjugated to the specific antibody (Ab) against SrMV coat protein (CP) and carbon quantum dots (C QDs) labeled with SrMV coat protein. The formation of the fluorophore-quencher immunocomplex CdTe QDs-Ab+C QDs-CP led to a distinct decrease in the fluorescence intensity of CdTe QDs. Conversely, the emission intensity of CdTe QDs recovered upon the introduction of unlabeled CP. The developed biosensor showed a limit of detection of 44 nM in a linear range of 0.10-0.54 μM and exhibited the strongest fluorescence intensity (about 47,000 a.u.) at 552 nm. This strategy was applied to detect purified CP in plant sap successfully with a recovery rate between 93-103%. Moreover, the feasibility of the proposed method was further verified by the detection of field samples, and the results were consistent with an enzyme-linked immunosorbent assay (ELISA). Contrarily to ELISA, the proposed biosensor did not require excessive washing and incubation steps, thus the detection could be rapidly accomplished in a few minutes. The high sensitivity and short assay time of this designed biosensor demonstrated its potential application in situ and rapid detection. In addition, the fluorescence quenching of CdTe QDs was attributed to dynamic quenching according to the Stern-Volmer equation.

Engineering the Signal Transduction between CdTe and CdSe Quantum Dots for in Situ Ratiometric Photoelectrochemical Immunoassay of Cry1Ab Protein

Controllable modulation of a response mode is extremely attracting to fabricate biosensor with programmable analytical performances. Here, we reported a proof-of-concept ratiometric photoelectrochemical (PEC) immunoassay of Cry1Ab protein based on the signal transduction regulation at the sensing interface. A sandwich-type PEC structure was designed so that gold nanorods sensitized quantum dots to fix primary antibody (Au NRs/QDs-Ab₁) and methylene blue sensitized QDs to combine a second antibody (MB/QDs-Ab₂), which served as photoelectric substrate and signal amplifier, respectively. Unlike common recognition element, such a sandwich-type PEC structure allowed for the in situ generation of two specific response signals. For analysis, Cry1Ab captured by Au NRs/QDs-Ab₁ led to a decreased photocurrent (I_Cry1Ab), while the subsequently anchored MB/QDs-Ab₂ produced another photocurrent (I_MB). Noteworthy, by taking advantage of the different energy band gaps of QDs, varying locations of CdTe and CdSe QDs could realize different signal transduction strategies (i.e., Mode 1 and Mode 2). Investigations on data analysis of I_Cry1Ab and I_MB via different routes demonstrated the superior analytical performances of ratiometry (Mode 1). Consequently, the ratiometric PEC immunosensor offered a linear range of 0.01-100 ng mL^-1 with a detection limit of 1.4 pg mL^-1. This work provides an efficient strategy for in situ collection of multiple photocurrents to design ratiometric PEC sensors.

Two-Dimensional Graphitic Carbon Nitride (g-C3N4) Nanosheets and Their Derivatives for Diagnosis and Detection Applications

The early diagnosis of certain fatal diseases is vital for preventing severe consequences and contributes to a more effective treatment. Despite numerous conventional methods to realize this goal, employing nanobiosensors is a novel approach that provides a fast and precise detection. Recently, nanomaterials have been widely applied as biosensors with distinctive features. Graphite phase carbon nitride (g-C₃N₄) is a two-dimensional (2D) carbon-based nanostructure that has received attention in biosensing. Biocompatibility, biodegradability, semiconductivity, high photoluminescence yield, low-cost synthesis, easy production process, antimicrobial activity, and high stability are prominent properties that have rendered g-C₃N₄ a promising candidate to be used in electrochemical, optical, and other kinds of biosensors. This review presents the g-C₃N₄ unique features, synthesis methods, and g-C₃N₄-based nanomaterials. In addition, recent relevant studies on using g-C₃N₄ in biosensors in regard to improving treatment pathways are reviewed.

Nanomaterials for virus sensing and tracking

The effect of the on-going COVID-19 pandemic on global healthcare systems has underlined the importance of timely and cost-effective point-of-care diagnosis of viruses. The need for ultrasensitive easy-to-use platforms has culminated in an increased interest for rapid response equipment-free alternatives to conventional diagnostic methods such as polymerase chain reaction, western-blot assay, etc. Furthermore, the poor stability and the bleaching behavior of several contemporary fluorescent reporters is a major obstacle in understanding the mechanism of viral infection thus retarding drug screening and development. Owing to their extraordinary surface-to-volume ratio as well as their quantum confinement and charge transfer properties, nanomaterials are desirable additives to sensing and imaging systems to amplify their signal response as well as temporal resolution. Their large surface area promotes biomolecular integration as well as efficacious signal transduction. Due to their hole mobility, photostability, resistance to photobleaching, and intense brightness, nanomaterials have a considerable edge over organic dyes for single virus tracking. This paper reviews the state-of-the-art of combining carbon-allotrope, inorganic and organic-based nanomaterials with virus sensing and tracking methods, starting with the impact of human pathogenic viruses on the society. We address how different nanomaterials can be used in various virus sensing platforms (e.g. lab-on-a-chip, paper, and smartphone-based point-of-care systems) as well as in virus tracking applications. We discuss the enormous potential for the use of nanomaterials as simple, versatile, and affordable tools for detecting and tracing viruses infectious to humans, animals, plants as well as bacteria. We present latest examples in this direction by emphasizing major advantages and limitations.

Ratiometric electrochemical immunoassay for procalcitonin based on dual signal probes: Ag NPs and Nile blue A

In order to determine procalcitonin, a sandwich-type ratiometic electrochemical immunosensor was developed by differential pulse voltammetry (DPV). Due to high chemical stability and good biocompatibility, graphitic carbon nitride (g-C₃N₄) could be used as feasible supporter to carry silver nanoparticles (Ag NPs) with an obvious oxidative peak (measured typically at + 0.3 V vs. SCE). Ag NPs loaded onto g-C₃N₄ were not only beneficial to prevent the agglomeration of Ag NPs, but also favorable to improve the electron transfer velocity of g-C₃N₄. Moreover, the g-C₃N₄-Ag NPs as the matrix could immobilize primary antibody by Ag-N bond. Nile blue A (NBA), an excellent redox probe based on the redox reaction with two-electrons, provides a current signal at - 0.38 V (vs. SCE). Zr-based metal organic framework (UiO-67), an ideal framework material with large specific surface area and high porosity, could absorb the substantial water-soluble NBA by electrostatic adsorption. The UiO-67 modified by NBA (NBA-UiO-67) owned admirable biocompatibility and was a qualifying marker to load the secondary antibody. For the immunosensor, the current ratio of NBA to Ag NPs (I_NBA/I_{Ag NPs}) was increased as the concentrations of PCT increased. Under the optimum conditions, the linear range of the immunosensor was 0.005 to 50 ng/mL; the detection limit was 1.67 pg/mL (S/N = 3), which reflected the excellent analytical performance of the sensor. The proposed immunosensor strategy is a simple and dependable platform, with great application potential in biometric analysis.

Homogeneous Photoelectrochemical Aptasensors for Tetracycline Based on Sulfur-Doped g-C3N4/n-GaN Heterostructures Formed through Self-Assembly

The complex synthesis of photoelectric materials and the difficulty of fixing the identification elements on the photoelectrode are long-standing problems in the field of photoelectrochemical (PEC) biosensing. In this work, a simple PEC aptasensor construction strategy based on a sulfur-doped g-C₃N₄ (SCN)/n-GaN heterostructure photoelectrode was proposed. The SCN/n-GaN heterostructure can be formed through self-assembly in solution since SCN can be uniformly dispersed in solution. In addition, as a dual-function mediate, an aptamer can be fixed on an SCN substrate automatically because of the good adsorption performance of SCN. Therefore, tedious steps of PEC electrode preparation and the fixing of recognition elements were both avoided. Compared with the traditional ones, the construction difficulty and time cost of the prepared PEC aptasensors are greatly reduced. The simplified experimental process improves the stability and reproducibility of the aptasensor. Finally, tetracycline (TET) was used as a model target to verify the sensing performance of the proposed PEC strategy. TET can consume the photogenerated holes of the SCN/n-GaN heterostructure, promote carrier migration, and result in the change in the photocurrent. The linear relationship between the change in the photocurrent intensity and the TET concentration can be used to detect TET. The aptasensor has a linear range of 0.10-10.0 nmol L^-1 and the detection limit is 0.030 nmol L^-1 (3S/N). The aptasensor was applied to the detection of TET in milk samples with satisfactory results.

Two-dimensional material-based virus detection

Cost-effective, rapid, and accurate virus detection technologies play key roles in reducing viral transmission. Prompt and accurate virus detection enables timely treatment and effective quarantine of virus carrier, and therefore effectively reduces the possibility of large-scale spread. However, conventional virus detection techniques often suffer from slow response, high cost or sophisticated procedures. Recently, two-dimensional (2D) materials have been used as promising sensing platforms for the high-performance detection of a variety of chemical and biological substances. The unique properties of 2D materials, such as large specific area, active surface interaction with biomolecules and facile surface functionalization, provide advantages in developing novel virus detection technologies with fast response and high sensitivity. Furthermore, 2D materials possess versatile and tunable electronic, electrochemical and optical properties, making them ideal platforms to demonstrate conceptual sensing techniques and explore complex sensing mechanisms in next-generation biosensors. In this review, we first briefly summarize the virus detection techniques with an emphasis on the current efforts in fighting again COVID-19. Then, we introduce the preparation methods and properties of 2D materials utilized in biosensors, including graphene, transition metal dichalcogenides (TMDs) and other 2D materials. Furthermore, we discuss the working principles of various virus detection technologies based on emerging 2D materials, such as field-effect transistor-based virus detection, electrochemical virus detection, optical virus detection and other virus detection techniques. Then, we elaborate on the essential works in 2D material-based high-performance virus detection. Finally, our perspective on the challenges and future research direction in this field is discussed.

Carbon dots for virus detection and therapy

Recent experience with the COVID-19 pandemic should be a lesson learnt with respect to the effort we have to invest in the development of new strategies for the treatment of viral diseases, along with their cheap, easy, sensitive, and selective detection. Since we live in a globalized world where just hours can play a crucial role in the spread of a virus, its detection must be as quick as possible. Thanks to their chemical stability, photostability, and superior biocompatibility, carbon dots are a kind of nanomaterial showing great potential in both the detection of various virus strains and a broad-spectrum antiviral therapy. The biosensing and antiviral properties of carbon dots can be tuned by the selection of synthesis precursors as well as by easy post-synthetic functionalization. In this review, we will first summarize current options of virus detection utilizing carbon dots by either electrochemical or optical biosensing approaches. Secondly, we will cover and share the up-to-date knowledge of carbon dots' antiviral properties, which showed promising activity against various types of viruses including SARS-CoV-2. The mechanisms of their antiviral actions will be further adressed as well. Finally, we will discuss the advantages and distadvantages of the use of carbon dots in the tangled battle against viral infections in order to provide valuable informations for further research and development of new virus biosensors and antiviral therapeutics.

Amplified photocurrent signal for fabricating photoelectrochemical sulfadimethoxine aptasensor based on carbon nitride photosensitization with visible/near-infrared light responsive zinc phthalocyanine

Developing effective analytical method for sulfadimethoxine (SDM) detection is highly desirable and vitally crucial for protecting environment safety and human health. Herein, a highly selective and sensitive photoelectrochemical (PEC) aptasensor for accurate detection of SDM was proposed, which employed zinc phthalocyanine/graphitic carbon nitride (ZnPc/CN) nanocomposite as photosensitive material. The ZnPc/CN nanocomposite was constructed by modification of CN nanosheet with visible/near-infrared light responsive photosensitizer ZnPc. The introduction of ZnPc into CN exhibited amplified PEC response, which was 5.7 and 18.3 times than pure ZnPc and CN, attributed to the enhanced light harvesting ability and improved photoelectric conversion efficiency of such nanocomposite. By using ZnPc/CN and sulfadimethoxine (SDM) aptamer as PEC response material and specific probe, a PEC aptasensor was established for SDM detection. The aptamer was connected to the surface of chitosan/ZnPc/CN/ITO through the formation of phosphoramidate bonds between the amino group of the chitosan and phosphate group of the aptamer at 5' end. The fabricated aptasensor displayed good detection linearity of 0.1 ~ 300 nM and low detection limit of 0.03 nM (S/N = 3) under optimized conditions, and the potential applicability of the PEC aptasensor was confirmed by detecting SDM in milk powder samples.

Detection of bleomycin and its hydrolase by the cationic surfactant-doped liquid crystal-based sensing platform

Bleomycin (BLM) is a broadly used antibiotic to treat different types of cancer. It can be hydrolyzed by bleomycin hydrolase (BLMH), which eventually influences the anti-tumor efficacy of BLM. Therefore, it is particularly important to detect BLM and BLMH. Herein, we demonstrated highly sensitive detection of BLM and BLMH by a simple and convenient liquid crystal (LC)-based sensing platform for the first time. 5CB (a nematic LC) doped with the cationic surfactant OTAB was working as the sensing platform. When the OTAB-laden 5CB interface was in contact with an aqueous solution of ssDNA, LCs displayed a bright image due to disruption of the arrangement of OTAB monolayers by ssDNA, indicating the planar orientation of LCs at the aqueous/LC interface. When BLM·Fe(II) and ssDNA were both present in the aqueous solution, ssDNA underwent irreversible cleavage, which prevented disruption of the arrangement of OTAB monolayers. Accordingly, LCs showed a dark image, suggesting the homeotropic orientation of LCs at the aqueous/LC interface. However, when BLM·Fe(II) was enzymatically hydrolyzed by BLMH, LCs remained the bright image. This approach showed high sensitivity for the detection of BLM and BLMH with the limits of detection of 0.2 nM and 0.3 ng/mL, respectively. Besides, the detection of BLM and BLMH was successfully achieved in human serum. This method has the advantages of high sensitivity, robust stability, simple operation, low cost, and easy detection through naked eyes, which makes it a potential candidate for applications in clinical analysis.

An electrochemical aptasensor based on PEI-C3N4/AuNWs for determination of chloramphenicol via exonuclease-assisted signal amplification

An electrochemical aptasensor, including the polyethyleneimine-graphite-like carbon nitride/Au nanowire nanocomposite (PEI-C₃N₄/AuNWs) and exonuclease-assisted signal amplification strategy was constructed for the determination of chloramphenicol (CAP). Initially, a nanocomposite with substantial electrocatalytic property was synthesized by PEI-C₃N₄/AuNWs. This improves the conductivity and specific surface area of the PEI-C₃N₄/AuNW-modified gold electrode. Next, a DNA with a complementary sequence to a CAP aptamer (cDNA) was immobilized on the PEI-C₃N₄/AuNW-modified electrode, followed by the CAP aptamer hybridized with cDNA. The lower signal at this time is due to the negatively charged phosphate group of the oligonucleotide and [Fe (CN)₆]^3-/4- electrostatically repelling each other. The presence of the CAP would cause aptamer on the electrode surface to fall off and be digested by Recjf exonuclease, which resulted in target recycling, and a significant increase in DPV signal can be observed at a potential of 0.176 V (vs. Ag/AgCl). Under optimal conditions, there is a linear relationship between the peak current and the logarithm of CAP concentration in the range 100 fM-1 μM, and the detection limit of this aptasensor is 2.96 fM (S/N = 3). Furthermore, the resultant aptasensor has excellent specificity, reproducibility, and long-term stability, and has been applied to the detection of CAP in milk samples. Graphical abstract The detection principle of the electrochemical aptasensor for CAP detection was based on PEI-C₃N₄/AuNWs and exonuclease-assistant signal amplification. It is based on the fact that PEI-C3N4/AuNWs nanocomposites on the surface of the electrode can effectively improve the performance of the aptasensor, and Recjf exonuclease initiates the target recycling process, causes signal amplification.

Application of carbon nanomaterials in human virus detection

Human-pathogenic viruses are still a chief reason for illness and death on the globe, as epitomized by the COVID-19 pandemic instigated by a coronavirus in 2020. Multiple novel sensors have been invented because diseases must be detected and diagnosed as early as possible, and recognition methods have to be carried out with minimal invasivity. Sensors have been particularly developed focusing on miniaturization by the use of nanomaterials for fabricating nanosensors. The nano-sized nature of nanomaterials and their exclusive optical, electronical, magnetical, and mechanical attributes can enhance patient care through the use of sensors with minimal invasivity and extreme sensitivity. Amongst the nanomaterials utilized for fabricating nano-sensors, carbon-based nanomaterials are promising as these sensors respond better to signals in various sensing settings. This review provides an overview of the recent developments in carbon nanomaterial-based biosensors for viral recognition based on the biomarkers that arise from the infection, the nucleic acids from the viruses, and the entire virus. The role of carbon nanomaterials is highlighted by the improvement of sensor and recognition functionality. The Dengue virus, Ebola virus, Hepatits virus, human immunodeficiency virus (HIV), influenza virus, Zika virus and Adenovirus are the virus types reviewed to illustrate the implementation of the techniques. Finally, the drawbacks and advantages of carbon nanomaterial-based biosensors for viral recognition are identified and discussed.

Platinum-based nanocomposite as oxygen reduction catalyst for efficient signal amplification: Toward building of high-performance photocathodic immunoassay

Photocathodic bioassays have shown great potential to apply in real bio-sample detection owning to their intrinsic abilities against interference from reductive species. However, the pursuit of photocathodic bioassays with excellent detection performance is still in the infancy. Herein, an advanced signal amplifier of platinum-based nanocatalyst with efficient oxygen reduction capability was explored to build a high-performance photocathodic immunoassay. The target model of carbohydrate antigen 19-9 (CA19-9, Ag) was used for describing the sensing platform. Specifically, the nontoxic Au/CuBi₂O₄ photocathode was first prepared by decorating Au nanoparticles on CuBi₂O₄ nanofilm and was used as the matrix to anchor capture CA19-9 antibody (Ab₁). Platinum (Pt) nanoparticles were loaded on graphene (GR) nanosheet to form Pt/GR nanocomposite, which was utilized as signal amplifier conjugating with signal CA19-9 antibody (Ab₂). When specific sandwich immunoreaction happened, the Pt/GR played the role of an efficient nanocatalyst to accelerate the reduction reaction of electron acceptor of oxygen in the electrolyte, causing evidently enhanced cathodic photocurrent signal. By incorporating this superior signal amplification strategy into the anti-interference photocathodic immunoassay, highly sensitive and specific detection of target Ag was realized. This work pioneers a new perspective for the design of advanced photocathodic bioanalysis for various targets of interest.

Plasmonic/magnetic molybdenum trioxide and graphitic carbon nitride quantum dots-based fluoroimmunosensing system for influenza virus

A novel magnetic/plasmonic-assisted fluoro-immunoassay system is developed for the detection of influenza virus using magnetic-derivatized plasmonic molybdenum trioxide quantum dots (MP-MoO₃ QDs) as the plasmonic/magnetic agent and fluorescent graphitic carbon nitride quantum dots (gCNQDs) as the monitoring probe. Specific antibody against influenza A virus was conjugated onto the surface of MP-MoO₃ QDs and gCNQDs, respectively. In the presence of influenza A virus (as the test virus), a core-satellite immunocomplex is formed between the antibody-conjugated nanomaterials (Ab-MP-MoO₃ QDs and Ab-gCNQDs) and their interaction resulted in the modulation and gradual enhancement of the fluorescence intensity of the detection probe with the influenza virus concentration-dependent increase. In addition, PL change without influenza A virus was not observed. Limits of detection of 0.25 and 0.9 pg/mL were achieved for Influenza virus A/New Caledonia (20/99/IVR/116) (H1N1) detection in deionized water and human serum, respectively. Clinically isolated influenza virus A/Yokohama (110/2009) (H3N2) was detected in the range of 45 - 25,000 PFU/mL, with a limit of detection ca 45 PFU/mL (as opposed to a minimum of 5000 PFU/mL for a commercial test kit). This developed biosensor provides a robust, sensitive as well as a selective platform for influenza virus detection.

In Situ Generation of Regularly Ordered 2D Ultrathin Covalent Organic Framework Films for Highly Sensitive Photoelectrochemical Bioanalysis

Developing new photoactive materials and electrode preparation technology with high stability, repeatability, easy fabrication, and a low electron-hole recombination rate is promising for ideal photoelectrochemical (PEC) biosensors, but it remains a great challenge. Here, a porous and crystalline oriented two-dimensional (2D) ultrathin covalent organic framework film (D-TA COF film) was formed in situ on indium-doped tin oxide (ITO) substrates under very mild conditions. The structure and morphology of D-TA COF film were characterized by means of Raman spectroscopy, X-ray photoelectron spectroscopy, scanning electron microscopy, and powder X-ray diffraction. Compared with the randomly oriented D-TA COF powder drop-coated on ITO, the photocurrent of the D-TA COF film grown on the ITO surface in situ achieved as high as ∼333-fold increase. This photocurrent can be further amplified by O₂ (acting as electron acceptors). Benefiting from the fabrication in situ, D-TA COF film also exhibited tough adhesion, assuring the film was difficult to separate from the electrode. Accordingly, D-TA COF film was applied as the photoactive material to build a PEC biosensor for H₂O₂ detection based on coupling with large amounts of catalase (CAT) through simple adsorption. The introduced CAT catalyzed the decomposition of H₂O₂ to O₂, leading to an enhancement of the photocurrent response. As a result, a "signal-on" PEC biosensor was fabricated with good sensitivity, rapid response, and high stability, and it can also detect H₂O₂ released from living cells. Taking into account these advantages, the D-TA COF film is expected to be an ideal photoactive material to construct various PEC biosensors, which as far as we know have not been reported.

Highly Sensitive Photoelectrochemical Biosensor Based on Quantum Dots Sensitizing Bi2Te3 Nanosheets and DNA-Amplifying Strategies

In this work, Bi₂Te₃ nanosheets treated with N-vinyl-pyrrolidinone showed highly sufficient and stable photocurrent for being used as a novel photoactive material. Accordingly, with CdTe quantum dots (QDs) sensitizing Bi₂Te₃ nanosheets, photoelectrochemical (PEC) biosensor coupling of DNA-amplifying strategies was constructed for sensitive miRNA-21 detection. Initially, the Bi₂Te₃ nanosheets on the electrode have conductive surface states with dissipationless electronic property, thus providing a highly stable photocurrent and a large surface-to-volume ratio. Then, with the participation of target miRNA-21 and auxiliary DNA, strand displacement amplification took place, thereby opening substantial DNA hairpins for triggering the next hybridization chain reaction (HCR). Through the HCR, long DNA tails decorated with CdTe QDs could thus be assembled on the electrode for enhancing the photocurrent of Bi₂Te₃ nanosheets. As a result, the proposed PEC biosensor showed a wide detection range from 10 fM to 100 pM with a detection limit of 3.3 fM, displaying a promising avenue to construct simple, ultrasensitive, and stable analytical techniques and tremendous potential in bioanalysis and early clinical diagnosis.

Three-dimensional macroporous gold electrodes superior to conventional gold disk electrodes in the construction of an electrochemical immunobiosensor for Staphylococcus aureus detection

Herein, a three-dimensional macroporous gold (3DMG) electrode is demonstrated to be a better choice than a conventional gold disk electrode in the construction of an electrochemical immunobiosensor for Staphylococcus aureus (S. aureus) detection. The 3DMG electrode was prepared on a gold disk electrode by one-step electrodeposition using hydrogen bubbles as dynamic templates. The 3DMG electrode has a high electrochemically active surface area with pore sizes ranging from 20 to 50 μm, and these unique features are conducive to the immobilization of primary antibodies and the capture of S. aureus. Secondary antibodies (Ab2) and alkaline phosphatase (ALP) were immobilized on mesoporous silica nanospheres (MSNs), and the resulting ALP-MSNs-Ab2 composites were utilized as signal tags to construct a sandwich-type electrochemical immunobiosensor. S. aureus was measured based on alkaline phosphatase-catalyzed silver deposition and differential pulse voltammetric detection. The linear range is from 5 to 109 CFU mL-1, and the detection limit is 2 CFU mL-1 for S. aureus detection. Due to the signal amplification of the 3DMG electrode, the sensitivity of the immunobiosensor constructed on the 3DMG electrode is 9 times that of an immunobiosensor constructed on a gold disc electrode. The proposed biosensor was successfully applied for detecting S. aureus in milk samples.

Recent Progress of Biomarker Detection Sensors

Early cancer diagnosis and treatment are crucial research fields of human health. One method that has proven efficient is biomarker detection which can provide real-time and accurate biological information for early diagnosis. This review presents several biomarker sensors based on electrochemistry, surface plasmon resonance (SPR), nanowires, other nanostructures, and, most recently, metamaterials which have also shown their mechanisms and prospects in application in recent years. Compared with previous reviews, electrochemistry-based biomarker sensors have been classified into three strategies according to their optimizing methods in this review. This makes it more convenient for researchers to find a specific fabrication method to improve the performance of their sensors. Besides that, as microfabrication technologies have improved and novel materials are explored, some novel biomarker sensors-such as nanowire-based and metamaterial-based biomarker sensors-have also been investigated and summarized in this review, which can exhibit ultrahigh resolution, sensitivity, and limit of detection (LoD) in a more complex detection environment. The purpose of this review is to understand the present by reviewing the past. Researchers can break through bottlenecks of existing biomarker sensors by reviewing previous works and finally meet the various complex detection needs for the early diagnosis of human cancer.

CdS quantum dots/Au nanoparticles/ZnO nanowire array for self-powered photoelectrochemical detection of Escherichia coli O157:H7

In this paper, the hydrothermally grown ZnO nanowire array (NWs) was modified by Au nanoparticles (NPs) and CdS quantum dots (QDs) to construct a high-performance photoelectrochemical (PEC) electrode. The aligned ZnO NWs, which decorated Au NPs and CdS QDs have the effective light absorption range from UV to visible region. This hybrid structure provided a self-powered PEC electrode with a favorable energy-band configuration for fast charge separation and transportation. Meanwhile, the Au NPs and CdS QDs also made increase of the surface area to improve the immobilization of the analytes. After assembling aptamer as recognition element, this composite nanoarray was further developed as a self-powered PEC biosensor by synergizing above multiple enhancement factors. The PEC aptasensor exhibited a rapid response in a wide linear range of 10-10⁷ CFU/mL with the detection limit as low as 1.125 CFU/mL to Escherichia coli O157:H7 (E. coli O157:H7). This approach would offer an alternative PEC transduction for fast environment monitoring and clinical diagnosis related to pathogenic bacteria.

The antiviral property of Sargassum fusiforme polysaccharide for avian leukosis virus subgroup J in vitro and in vivo

Avian Leukosis Virus Subgroup J (ALV-J) is an oncogenic retrovirus, mainly spread by vertical and horizontal transmission, which have caused severe losses in world poultry industry. Sargassum fusiforme polysaccharide (SFP), a marine algae sulfated polysaccharide, has attracted more attention due to its variously biological activities. In this study, the anti-ALV-J property of SFP was assessed in vivo and in vitro. The results demonstrated that different Mw of SFPs showed virustatic activity to ALV-J in vitro by combining with the virus when ALV-J adsorbed onto the host cells. When treated with SFPs, the ALV-J gene and protein expression reduced clearly and SFP-3 (Molecular weight 9 kDa) had the best antiviral effect. Results in vivo showed that the immunosuppression of the ALV-J infected chickens were relieved by SFP-3. Moreover, SFP-3 obviously inhibit the viral shedding and alleviated the organs damage caused by ALV-J. This study offered a new method for ALV-J treatment and enriched the potential application of SFP.