Fabrication of an efficient and sensitive colorimetric biosensor based on Uricase/ Th-MOF for uric acid sensing in biological samples

Sensing patches for biomarker identification in skin-derived biofluids

In conventional clinical disease diagnosis and screening based on biomarker detection, most analysis samples are collected from serum, blood. However, these invasive collection methods require specific instruments, professionals, and may lead to infection risks. Additionally, the diagnosis process suffers from untimely results. The identification of skin-related biomarkers plays an unprecedented role in early disease diagnosis. More importantly, these skin-mediated approaches for collecting biomarker-containing biofluid samples are noninvasive or minimally invasive, which is more preferable for point-of-care testing (POCT). Therefore, skin-based biomarker detection patches have been promoted, owing to their unique advantages, such as simple fabrication, desirable transdermal properties and no requirements for professional medical staff. Currently, the skin biomarkers extracted from sweat, interstitial fluid (ISF) and wound exudate, are achieved with wearable sweat patches, transdermal MN patches, and wound patches, respectively. In this review, we detail these three types of skin patches in biofluids collection and diseases-related biomarkers identification. Patch classification and the corresponding manufacturing as well as detection strategies are also summarized. The remaining challenges in clinical applications and current issues in accurate detection are discussed for further advancement of this technology (Scheme 1).

Flow injection amperometric uric acid biosensor based on AuNPs-GO-CS porous composite cryogel coated on PB-PEDOT:PSS modified screen-printed carbon electrode

An enzymatic amperometric uric acid (UA) biosensor was successfully developed by modifying a screen-printed carbon electrode (SPCE) with Prussian blue-poly(3,4-ethylene dioxythiophene) polystyrene sulfonate composite (PB-PEDOT:PSS). The modified SPCE was coated with gold nanoparticles-graphene oxide-chitosan composite cryogel (AuNPs-GO-CS cry). Uricase (UOx) was directly immobilized via chemisorption on AuNPs. The nanocomposite was characterized by scanning electron microscopy, transmission electron microscopy, ultraviolet-visible spectroscopy, and Fourier transform infrared spectroscopy. The electrochemical characterization of the modified electrode was performed by cyclic voltammetry and electrochemical impedance spectroscopy. UA was determined using amperometric detection based on the reduction current of PB which was correlated with the amount of H2O2 produced during the enzymatic reaction. Under optimal conditions, the fabricated UA biosensor in a flow injection analysis (FIA) system produced a linear range from 5.0 to 300 μmol L-1 with a detection limit of 1.88 μmol L-1. The proposed sensor was stable for up to 221 cycles of detection and analysis was rapid (2 min), with good reproducibility (RSDs < 2.90 %, n = 6), negligible interferences, and recoveries from 94.0 ± 3.9 to 101.1 ± 2.6 %. The results of UA detection in blood plasma were in agreement with the enzymatic colorimetric method (P > 0.05).

Bioinspired mp20 mimicking uricase in ZIF-8: Metal ion dependent for controllable activity

Mini protein mimicking uricase (mp20) has shown significant potential as a replacement for natural enzymes in the development of uric acid biosensors. However, the design of mp20 has resulted to an inactive form of peptide, causing of loss their catalytic activity. Herein, this paper delineates the impact of various metal cofactors on the catalytic activity of mp20. The metal ion-binding site prediction and docking (MIB) web server was employed to identify the metal ion binding sites and their affinities towards mp20 residues. Among the tested metal ions, Cu2+ displayed the highest docking score, indicating its preference for interaction with Thr16 and Asp17 residues of mp20. To assess the catalytic activity of mp20 in the presence of metal ions, uric acid assays was monitored using a colorimetric method. The presence of Cu2+ in the assays promotes the activation of mp20, resulting in a color change based on quinoid production. Furthermore, the encapsulation of the mp20 within zeolitic imidazolate framework-8 (ZIF-8) notably improved the stability of the biomolecule. In comparison to the naked mp20, the encapsulated ZIFs biocomposite (mp20@ZIF-8) demonstrates superior stability, selectivity and sensitivity. ZIF's porous shells provides excellent protection, broad detection (3-100 μM) with a low limit (4.4 μM), and optimal function across pH (3.4-11.4) and temperature (20-100°C) ranges. Cost-effective and stable mp20@ZIF-8 surpasses native uricase, marking a significant biosensor technology breakthrough. This integration of metal cofactor optimization and robust encapsulation sets new standards for biosensing applications.

Integration of multienzyme co-immobilization and biomimetic catalysis in magnetic metal-organic framework nanoflowers for α-amylase detection in fermentation samples

Multiple enzymes induce biological cascade catalysis is essential in nature and industrial production. However, the shortcomings of enzymes, including unsatisfactory stability, reusability, and sensitivity in harsh microenvironment, have restricted their broader use. Here, we report a facile method for fabricating a cascade system by combining the benefits of immobilized enzymes and biomimetic catalysis based on magnetic metal-organic framework nanoflowers (mMOFNFs). mMOFNFs prepared through the layered double hydroxide-derived strategy exhibited remarkable peroxidase-like activity and accessible amino interface, enabling it to serve not only as a reliable carrier for α-glucosidase and glucose oxidase fixation, but also as a nanozyme participating in cascade. On this basis, a colorimetric biosensor of excellent sensitivity and selectivity for α-amylase detection was constructed with a wide range (2-225 U L-1), low detection limit (2.48 U L-1), and rapid operation (30 min). This work provides a versatile strategy for establishing multi-enzyme cascade systems and rapid analysis of α-amylase.

Co4+ in porous ZIF-67-derives intercalating-bridging adsorption of 2-reaction sites for simultaneous 2-electron transfer toward sensitive detection of uric acid

Metal-organic frameworks (MOFs) have been used to detect uric acid (UA), but still very challenging to achieve a low detection limit due to the low inferior conductivity of MOFs. Herein, three different N-doped ZIF-67-derived carbons were synthesized for the first time by one-step co-pyrolysis of 2-methylimidazole with cobalt nitrate (CN), cobalt acetate (CA) or cobalt chloride (CC) toward UA sensing. Afterwards, the cobalt nitrate-derived Co particle (Co/CN) supported by N-doped ZIF-67-derived carbon displays extremely low detection limit and high sensitivity for UA, outperformed all reported MOFs-based UA sensors. More interestingly, it was discovered that the high valence Co4+ within the Co/CN sample produced in high-acidic environment can intercalate in the frame for a bridge adsorption between two reaction sites, which boosted simultaneous 2-electron transfer, while Co3+ only allows an end-adsorption structure for one-electron transfer being the rate determining step. Furthermore, the bridge adsorption mode of UA on Co4+ -based catalyst was also verified by theoretical DFT calculations and XPS experiment. This work holds great promise for a selective and sensitive UA sensor for practical bioscience and clinic diagnostic applications while shedding lights in fundamental research for innovative designs and developments of high-sensitive electrochemical sensors.

Mild hyperthermia enhanced synergistic uric acid degradation and multiple ROS elimination for an effective acute gout therapy

BACKGROUND

Acute gouty is caused by the excessive accumulation of Monosodium Urate (MSU) crystals within various parts of the body, which leads to a deterioration of the local microenvironment. This degradation is marked by elevated levels of uric acid (UA), increased reactive oxygen species (ROS) production, hypoxic conditions, an upsurge in pro-inflammatory mediators, and mitochondrial dysfunction.

RESULTS

In this study, we developed a multifunctional nanoparticle of polydopamine-platinum (PDA@Pt) to combat acute gout by leveraging mild hyperthermia to synergistically enhance UA degradation and anti-inflammatory effect. Herein, PDA acts as a foundational template that facilitates the growth of a Pt shell on the surface of its nanospheres, leading to the formation of the PDA@Pt nanomedicine. Within this therapeutic agent, the Pt nanoparticle catalyzes the decomposition of UA and actively breaks down endogenous hydrogen peroxide (H2O2) to produce O2, which helps to alleviate hypoxic conditions. Concurrently, the PDA component possesses exceptional capacity for ROS scavenging. Most significantly, Both PDA and Pt shell exhibit absorption in the Near-Infrared-II (NIR-II) region, which not only endow PDA@Pt with superior photothermal conversion efficiency for effective photothermal therapy (PTT) but also substantially enhances the nanomedicine's capacity for UA degradation, O2 production and ROS scavenging enzymatic activities. This photothermally-enhanced approach effectively facilitates the repair of mitochondrial damage and downregulates the NF-κB signaling pathway to inhibit the expression of pro-inflammatory cytokines.

CONCLUSIONS

The multifunctional nanomedicine PDA@Pt exhibits exceptional efficacy in UA reduction and anti-inflammatory effects, presenting a promising potential therapeutic strategy for the management of acute gout.

Friends or Foes: Fundamental Principles of Th-Organic Scaffold Chemistry Using Zr-Analogs as a Guide

The fundamental interest in actinide chemistry, particularly for the development of thorium-based materials, is experiencing a renaissance owing to the recent and rapidly growing attention to fuel cycle reactors, radiological daughters for nuclear medicine, and efficient nuclear stockpile development. Herein, we uncover fundamental principles of thorium chemistry on the example of Th-based extended structures such as metal-organic frameworks in comparison with the discrete systems and zirconium extended analogs, demonstrating remarkable over two-and-half-year chemical stability of Th-based frameworks as a function of metal node connectivity, amount of defects, and conformational linker rigidity through comprehensive spectroscopic and crystallographic analysis as well as theoretical modeling. Despite exceptional chemical stability, we report the first example of studies focusing on the reactivity of the most chemically stable Th-based frameworks in comparison with the discrete Th-based systems such as metal-organic complexes and a cage, contrasting multicycle recyclability and selectivity (>97%) of the extended structures in comparison with the molecular compounds. Overall, the presented work not only establishes the conceptual foundation for evaluating the capabilities of Th-based materials but also represents a milestone for their multifaceted future and foreshadows their potential to shape the next era of actinide chemistry.

Photosensitized covalent organic framework as a light-induced oxidase mimic for colorimetric detection of uric acid

As large numbers of people are suffering from gout, an accurate, rapid, and sensitive method for the detection of gout biomarker, uric acid, is important for its effective control, diagnosis, and therapy. Although colorimetric detection methods based on uricase have been considered, they still have limitations as they produce toxic H2O2 and are expensive and not stable. Here, a novel uricase-free colorimetric method was developed for the sensitive and selective detection of uric acid based on the light-induced oxidase-mimicking activity of a new photosensitized covalent organic framework (COF) (2,4,6-trimethylpyridine-3,5-dicarbonitrile-4-[2-(4-formylphenyl)ethynyl]benzaldehyde COF [DCTP-EDA COF]). DCTP-EDA COF has a strong ability to harvest visible light, and it could catalyze the oxidation of 1,4-dioxane, 3,3',5,5'-tetramethylbenzidine under visible light irradiation to produce obvious color changes. With the addition of uric acid, however, the significant inhibition of the oxidase-mimicking activity of DCTP-EDA COF remarkably faded the color, and thus uric acid could be colorimetrically detected in the range of 2.0-150 μM with a limit of detection of 0.62 μM (3σ/K). Moreover, the present colorimetric method exhibited high selectivity; uric acid level in serum samples was successfully determined, and the recoveries ranged from 96.5% to 105.64%, suggesting the high accuracy of the present colorimetric method, which demonstrates great promise in clinical analysis.

Recent Progress and Prospect of Metal-Organic Framework-Based Nanozymes in Biomedical Application

A nanozyme is a nanoscale material having enzyme-like properties. It exhibits several superior properties, including low preparation cost, robust catalytic activity, and long-term storage at ambient temperatures. Moreover, high stability enables repetitive use in multiple catalytic reactions. Hence, it is considered a potential replacement for natural enzymes. Enormous research interest in nanozymes in the past two decades has made it imperative to look for better enzyme-mimicking materials for biomedical applications. Given this, research on metal-organic frameworks (MOFs) as a potential nanozyme material has gained momentum. MOFs are advanced hybrid materials made of inorganic metal ions and organic ligands. Their distinct composition, adaptable pore size, structural diversity, and ease in the tunability of physicochemical properties enable MOFs to mimic enzyme-like activities and act as promising nanozyme candidates. This review aims to discuss recent advances in the development of MOF-based nanozymes (MOF-NZs) and highlight their applications in the field of biomedicine. Firstly, different enzyme-mimetic activities exhibited by MOFs are discussed, and insights are given into various strategies to achieve them. Modification and functionalization strategies are deliberated to obtain MOF-NZs with enhanced catalytic activity. Subsequently, applications of MOF-NZs in the biosensing and therapeutics domain are discussed. Finally, the review is concluded by giving insights into the challenges encountered with MOF-NZs and possible directions to overcome them in the future. With this review, we aim to encourage consolidated efforts across enzyme engineering, nanotechnology, materials science, and biomedicine disciplines to inspire exciting innovations in this emerging yet promising field.

Exploring the impact of taurine on the biochemical properties of urate oxidase: response surface methodology and molecular dynamics simulation

This paper investigates the impact of taurine as an additive on the structural and functional stability of urate oxidase. First, the effect of the processing parameters for the stabilization of Urate Oxidase (UOX) using taurine was examined using the response surface methodology (RSM) and the central composite design (CCD) model. Also, the study examines thermodynamic and kinetic parameters as well as structural changes of urate oxidase with and without taurine. Fluorescence intensity changes indicated static quenching during taurine binding. The obtained result indicates that taurine has the ability to preserve the native structural conformation of UOX. Furthermore, molecular dynamics simulation is conducted in order to get insights into the alterations in the structure of urate oxidase in the absence and presence of taurine under optimal conditions. The molecular dynamics simulation section investigated the formation of hydrogen bonds (H-bonds) between different components as well as analysis of root mean square deviation (RMSD), root mean square fluctuations (RMSF) and secondary structure. Lower Cα-RMSD and RMSF values indicate greater stabilization of the taurine-treated UOX structure compared to the free enzyme. The results of molecular docking indicate that the binding of taurine to the UOX enzyme through hydrophobic interactions is associated with a negative value for the Gibbs free energy.

A facile, low-cost bimetallic iron-nickel MOF nanozyme-propelled ratiometric fluorescent sensor for highly sensitive and selective uric acid detection and its smartphone application

As a kind of well-known disease biomarker, uric acid (UA) is closely associated with normal metabolism and health. Despite versatile nanozymes facilitating the analysis of UA, most previous works could only generate single-signal outputs with unsatisfactory detection performance. Exploring a novel ratiometric fluorescent UA sensor with high sensitivity, reliability and portable sensing ability based on facile, low-cost nanozymes is still challenging. Herein, we report the first metal-organic-framework (MOF) nanozyme-originated ratiometric fluorescent UA sensor based on Fe3Ni-MOF-NH2 propelled UA/uricase/o-phenylenediamine tandem catalytic reaction. Different from previous reports, the peroxidase-like property and fluorescence of Fe3Ni-MOF-NH2 were simultaneously employed. In the absence of UA, only the MOF's fluorescence at 430 nm (FI430) can be observed, while the addition of UA will initiate UA/uricase catalytic reaction, and the generated H2O2 could oxidize o-phenylenediamine into highly fluorescent 2,3-diaminophenazine (DAP) (emission at 565 nm, FI565) under the catalysis of the MOF nanozyme. Coincidently, MOF's fluorescence can be quenched by DAP via the inner filter effect, resulting in a low FI430 value and high FI565 value, respectively. Therefore, H2O2 and UA can be alternatively detected through monitoring the above contrary fluorescence changes. The limit of detection for UA is 24 nM, which is much lower than those in most previous works, and the lowest among nanozyme-based ratiometric fluorescent UA sensors reported to date. Moreover, the portable sensing of UA via smartphone-based RGB analysis was facilely achieved by virtue of the above nanozyme-propelled tandem catalytic system, and MOF nanozyme-based molecular contrary logic pairs were further implemented accordingly.

A luminescent MOF-based nonenzymatic probe for colorimetric/photothermal/fluorescence triple-mode assay of uric acid in body fluids

Monitoring the levels of uric acid (UA) in body fluids is of great significance in the clinical diagnosis and therapy of related diseases. Herein, a novel nanocomposite R6G@Fe-MOF based nonenzymatic probe is presented to provide a ratiometric fluorescent, colorimetric, and photothermal triple read-out signal for the visual, sensitive, and convenient assay of UA. The framework structure of the in situ encapsulated R6G@Fe-MOF is found to decompose upon the addition of UA, resulting in the reduction of Fe3+ to Fe2+. This reduction will lead to a rapid increase in fluorescence emission (FL) at 430 nm. Simultaneously, the FL at 573 nm will decrease remarkably due to the inner filter effect (IFE) between UA and R6G@Fe-MOF. Furthermore, the reaction of the generated Fe2+ with potassium ferricyanide (K3 [Fe(CN)6]) can in situ generate Prussian blue (PBNPs) with outstanding color and photothermal properties, which allow for easy colorimetric and photothermal signal readout. The detection limits (LOD) for the colorimetric, fluorometric and photothermal detection are low at 1.68 μM, 0.236 μM, and 1.32 μM respectively. Ultimately, it is successfully employed to determine UA in urine, serum, and saliva, yielding satisfactory results. The constructed R6G@Fe-MOF sensor provides a simple, sensitive, and accurate determination of UA that can be tailored to meet the needs of various applications, and also provides new perspectives for the design and development of versatile sensors for diverse uses.

Review on Uric Acid Recognition by MOFs with a Future in Machine Learning

Uric acid (UA) is produced from purine metabolism and serves as a prevalent biomarker for multiple diseases including cancer. Hyperuricemia or hypouricemia can cause multiple dysfunctions throughout the biological processes. Consequently, there is a pressing need for monitoring UA concentration in body fluid. While clinical methods are known, the availability of a point-of-care testing (PoCT) kit remains conspicuously absent. In the case of electrochemical recognition of UA, the oxidation potential of ascorbic acid closely aligns with that of UA and thus it hinders the detection process, which eventually may result in false positive signals. Several chemosensors are known in the field of supramolecular chemistry, and metal-organic frameworks (MOFs) are one of the best-performing contenders due to their robustness, stability, and versatile structures. In this review, we tried to unbox the up-to-date development of UA sensing by MOFs. We delve into the state of UA recognition by MOFs, exploring both electrochemical and fluorometric pathways and drawing comparisons with structurally similar probes like covalent organic frameworks (COFs) to understand/establish the advantages of MOFs specifically in UA sensing. In the absence of a PoCT kit, we have provided the conceptual outlook for designing a PoCT device termed a "Urimeter" via electrochemical operation. For the first time, we have proposed different methods of how UA sensing can be tied up with artificial intelligence and machine learning (AI-ML).

Reactive oxygen nanobiocatalysts: activity-mechanism disclosures, catalytic center evolutions, and changing states

Benefiting from low costs, structural diversities, tunable catalytic activities, feasible modifications, and high stability compared to the natural enzymes, reactive oxygen nanobiocatalysts (RONBCs) have become dominant materials in catalyzing and mediating reactive oxygen species (ROS) for diverse biomedical and biological applications. Decoding the catalytic mechanism and structure-reactivity relationship of RONBCs is critical to guide their future developments. Here, this timely review comprehensively summarizes the recent breakthroughs and future trends in creating and decoding RONBCs. First, the fundamental classification, activity, detection method, and reaction mechanism for biocatalytic ROS generation and elimination have been systematically disclosed. Then, the merits, modulation strategies, structure evolutions, and state-of-art characterisation techniques for designing RONBCs have been briefly outlined. Thereafter, we thoroughly discuss different RONBCs based on the reported major material species, including metal compounds, carbon nanostructures, and organic networks. In particular, we offer particular insights into the coordination microenvironments, bond interactions, reaction pathways, and performance comparisons to disclose the structure-reactivity relationships and mechanisms. In the end, the future challenge and perspectives for RONBCs are also carefully summarised. We envision that this review will provide a comprehensive understanding and guidance for designing ROS-catalytic materials and stimulate the wide utilisation of RONBCs in diverse biomedical and biological applications.

Progress in optical sensors-based uric acid detection

The escalating number of patients affected by various diseases, such as gout, attributed to abnormal uric acid (UA) concentrations in body fluids, has underscored the need for rapid, efficient, highly sensitive, and stable UA detection methods and sensors. Optical sensors have garnered significant attention due to their simplicity, cost-effectiveness, and resistance to electromagnetic interference. Notably, research efforts have been directed towards UA on-site detection, enabling daily monitoring at home and facilitating rapid disease screening in the community. This review aims to systematically categorize and provide detailed descriptions of the notable achievements and emerging technologies in UA optical sensors over the past five years. The review highlights the advantages of each sensor while also identifying their limitations in on-site applications. Furthermore, recent progress in instrumentation and the application of UA on-site detection in body fluids is discussed, along with the existing challenges and prospects for future development. The review serves as an informative resource, offering technical insights and promising directions for future research in the design and application of on-site optical sensors for UA detection.

Enhancing catalytic performance of Fe and Mo co-doped dual single-atom catalysts with dual-enzyme activities for sensitive detection of hydrogen peroxide and uric acid

Single-atom catalysts (SACs) have attracted much attention due to their excellent catalytic activity, but the improvement of atomic loading which means that weight fraction (wt%) of metal atom was still facing great challenges. In this work, iron and molybdenum co-doped dual single-atom catalysts (Fe/Mo DSACs) was prepared for the first time by using the soft template sacrifice strategy, which improved significantly the atomic load and exhibited both the oxidase-like (OXD) activity and the dominant peroxidase-like (POD) activity. Further experiments reveal that Fe/Mo DSACs can not only catalyze O₂ to generate O₂^•- and ¹O₂, but also catalyze H₂O₂ to generate a large number of •OH, which caused 3, 3', 5, 5'-tetramethylbenzidine (TMB) to be oxidized to oxTMB, accompanied by the color changing from colorless to blue. The steady-state kinetic test showed that Michaelis-Menten constant (K_m) values and the maximum initial velocity values (V_max) of the POD activity of Fe/Mo DSACs were 0.0018 mM and 12.6 × 10^-8 M s^-1, respectively. The corresponding catalytic efficiency was tens of times higher than Fe SACs and Mo SACs, which proves that the synergistic effect between Fe and Mo has significantly improved the catalytic ability. Based on the excellent POD activity of Fe/Mo DSACs, a colorimetric sensing platform combined with TMB was proposed to realize the sensitive detection of H₂O₂ and uric acid (UA) in a wide range, with limits of detection as low as 0.13 and 0.18 μM, respectively. Finally, accurate and reliable results were obtained in the detection of H₂O₂ in cells, and of UA in human serum and urine.

Research progress on MOFs and their derivatives as promising and efficient electrode materials for electrocatalytic hydrogen production from water

Hydrogen energy is considered to be the most potential "ultimate energy source" due to its high combustion calorific value, cleanliness, and pollution-free characteristics. Furthermore, the production of hydrogen via the electrolysis of water has the advantages of simplicity, high efficiency, environmentally safe, and high-purity hydrogen. However, it is also associated with issues such as high-power consumption for the reaction and limited large-scale application of noble metal catalysts. Metal-organic frameworks (MOFs) are porous composite materials composed of metal ions and organic functional groups through orderly coordination with large specific surface areas and large porosity. Herein, we focus on the research status of MOFs and their transition metal derivatives for electrocatalytic water splitting to produce hydrogen and briefly describe the reaction mechanism and evaluation parameters of the electrocatalytic hydrogen evolution and oxygen evolution reactions. Furthermore, the relationship between the catalytic behavior and catalytic activity of different MOF-based catalysts and their morphology, elemental composition, and synthetic strategy is analyzed and discussed. The reasons for the excellent activity and poor stability of the original MOF materials for the electrolysis of water reaction are shown through analysis, and using various means to improve the catalytic activity by changing the electronic structure, active sites, and charge transfer rate, MOF-based catalysts were obtained. Finally, we present perspectives on the future development of MOFs for the electrocatalytic decomposition of water.

Design of Smartphone-Assisted Point-of-Care Platform for Colorimetric Sensing of Uric Acid via Visible Light-Induced Oxidase-Like Activity of Covalent Organic Framework

Monitoring of uric acid (UA) levels in biological samples is of great significance for human health, while the development of a simple and effective method for the precise determination of UA content is still challenging. In the present study, a two-dimensional (2D) imine-linked crystalline pyridine-based covalent organic framework (TpBpy COF) was synthesized using 2,4,6-triformylphloroglucinol (Tp) and [2,2'-bipyridine]-5,5'-diamine (Bpy) as precursors via Schiff-base condensation reactions and was characterized with scanning electron microscopy (SEM), Energy dispersive X-ray spectroscopy (EDS), Powder X-ray diffraction (PXRD), Fourier transform infrared (FT-IR) spectroscopy, and Brunauer-Emmett-Teller (BET) assays. The as-synthesized TpBpy COF exhibited excellent visible light-induced oxidase-like activity, ascribed to the generation of superoxide radicals (O₂^•-) by photo-generated electron transfer. TpBpy COF could efficiently oxidase the colorless substrate 3,3',5,5'-tetramethylbenzydine (TMB) into blue oxidized TMB (oxTMB) under visible light irradiation. Based on the color fade of the TpBpy COF + TMB system by UA, a colorimetric procedure was developed for UA determination with a detection limit of 1.7 μmol L^-1. Moreover, a smartphone-based sensing platform was also constructed for instrument-free and on-site detection of UA with a sensitive detection limit of 3.1 μmol L^-1. The developed sensing system was adopted for UA determination in human urine and serum samples with satisfactory recoveries (96.6-107.8%), suggesting the potential practical application of the TpBpy COF-based sensor for UA detection in biological samples.

Platinum nanoparticles confined in metal-organic frameworks as excellent peroxidase-like nanozymes for detection of uric acid

High levels of uric acid (UA) in humans can cause a range of diseases, and traditional assays that rely on uric acid enzymes to break down uric acid are limited by the inherent deficiencies of natural enzymes. Fortunately, the rapid development of nanozymes in recent years is expected to solve the above-mentioned problems. Hence, we used a host-guest strategy to synthesize a platinum nanoparticle confined in a metal-organic framework (Pt NPs@ZIF) that can sensitively detect UA levels in human serum. Unlike previously reported free radical-catalyzed oxidation systems, its unique electron transfer mechanism confers excellent peroxidase-like activity to Pt NPs@ZIF. In addition, UA can selectively inhibit the chromogenic reaction of TMB, thus reducing the absorbance of the system. Therefore, using the peroxidase-like activity of Pt NPs@ZIF and using TMB as a chromogenic substrate, UA can be detected directly without relying on natural enzymes. The results showed a relatively wide detection range (10-1000 μM) and a low detection limit (0.2 μM). Satisfactory results were also obtained for UA in human serum. This study with simple operation and rapid detection offers a promising method for efficiently detecting UA in serum.

Light-enhanced transparent hydrogel for uric acid and glucose detection by four different analytical platforms

The lack of solid-phase media limits the portability of colorimetric sensing platforms. In this study, a series of transparent polyvinyl alcohol (PVA) hydrogels encapsulated antimony tin oxide nanoparticles (ATO NPs) and 3,3',5,5'-tetramethylbenzidine (TMB) were developed as the solid-phase sensing media for glucose and uric acid. Under the conditions of H₂O₂ and UV light, the hydrogel presented a multicatalytic ability (photo Fenton-like and peroxidase-like activities), which accelerated the oxidation of TMB, turning the hydrogel from colorless to blue and finally enhancing the detection signal. The plasticity of the hydrogel allowed it to be designed into various shapes (membrane, microsphere etc.) to adapt multiple detection platforms (a liquid/solid-phase UV spectrophotometer, a NanoPhotometer, and smartphone spectroscopy). The hydrogel sensing media exhibited excellent tunability and enhanced the photocatalytic ability. The proposed material was successfully applied to detect glucose and uric acids in real samples by four detection platforms to evaluate its practicability.

A novel colorimetric detection of glutathione based on stable free radical TEMPO oxidation of 3,3',5,5'-tetramethylbenzizine (TMB) via Copper(II) acetylacetonate catalysis

In this work, a new colorimetric method for the determination of Glutathione (GSH) on the basis of stable free radical 2,2,6,6 - tetramethylpiperidine - 1 - oxyl (TEMPO) oxidation of 3,3',5,5'-tetramethylbenzizine (TMB) via copper(II) acetylacetonate (Cu(acac)₂) catalysis was proposed. TEMPO was catalyzed by Cu(acac)₂ to produce TEMPO⁺, then TEMPO⁺ oxidized TMB to produce oxidized TMB (ox - TMB). The resulting ox - TMB showed blue and possessed a distinct absorption peak about 650 nm. Whereas, GSH prohibited the generation of ox - TMB through inhibiting TMB oxidation. As compared to the case that GSH was absent, significantly enhanced absorption was determined, and was proportional to GSH amount. On this basis, a qualitative and quantitative detection method of GSH with the naked eye and the microplate reader was achieved. The developed TEMPO - based method achieved GSH biosensing with improved sensitivity in a good specificity - manner. The limit of detection (LOD) was 90 μM via naked eye, and the microplate reader was 4.71 μM. And the stable free radical TEMPO possessed higher stability and lower toxicity than traditional oxidant of H₂O₂. Moreover, this TEMPO - based method achieved good results in the detection of GSH in human serums.

Nanozymatic magnetic nanomixers for enzyme immobilization and multiplexed detection of metabolic disease biomarkers

Nanozymes with enzyme-mimicking catalytic activity and unique functions have stimulated increasing interest in the biosensing field. Herein, we report a magnetic nanozyme (MNE) with integrated superior peroxidase-like activity and efficient mixing ability. This nanozymatic magnetic nanomixer is synthesized by depositing a Fe2+-doped polydopamine coating on the surface of well-aligned magnetic nanoparticles to form a rigid chain-like nanostructure. Polydopamine coating of the nanozymatic MNE allows for efficient immobilization of natural enzymes such as glucose oxidase, cholesterol oxidase or urate oxidase to produce a series of enzymes-immobilized MNE (MNE@enzymes) with intrinsic multienzyme cascade properties. These MNE@enzymes show synchronously rotating capability in spinning magnetic fields, which leads to an 80∼100% improvement in their overall catalytic efficiencies. In the on-chip detection of small molecular metabolites (i.e., glucose, cholesterol, and uric acid), the rotating MNE@enzymes lead to detection sensitivities 2.1∼4.3 times higher than those of the static ones. Importantly, the consistent performance of the rotating MNE@enzymes offers the possibility of integrating the detection of glucose, free cholesterol and uric acid into a single multiplexing microchip assay with smartphone readout, affording an improved sensitivity, good selectivity and reliability. The designed enzymes-loaded MNEs holds great promise in developing rapid and ultrasensitive measurements of diverse targets of healthcare concerns using portable devices.

Quantification of uric acid concentration in tears by using PDMS inverse opal structure surface-enhanced Raman scattering substrates: Application in hyperuricemia

Hyperuricemia is closely related to a variety of diseases and has been listed as one of the twenty most persistent diseases in the 21st century by the United Nations. Therefore, strengthening the diagnosis of hyperuricemia has become imperative. Here, ordered inverse opal array structures (PAANs) composed of PDMS and gold nanoparticles (AuNPs) have been designed using a bottom-up self-assembly method. The structures exhibit a periodic distribution of hot spots, an enhancement factor (EF) of 4.22 × 10⁴, and a relative standard deviation (RSD) of signal intensity of less than 5%, which can provide high reproducibility of SERS signals. The PAANs substrate is used to detect uric acid in the tears of patients with hyperuricemia, and the limit of detection is 6.03 μM. The significant linear relationship between blood uric acid and tear uric acid indicates that the developed method is a rapid, effective, and non-invasive technique for the determination of uric acid in tears.

Lipase immobilization on a novel class of Zr-MOF/electrospun nanofibrous polymers: Biochemical characterization and efficient biodiesel production

In this study, due to the favorable properties of MOF compounds and fibrous materials, new nanostructures of Zr-MOF/PVP nanofibrous composites were synthesized by electrospinning procedure. The related features of these samples were characterized by relevant analyzes, including SEM, BET surface area analysis, XRD, and FTIR spectroscopy. The final product showed significant properties such as small particle size distribution, large surface area, and high crystallinity. This strategy for producing these nanostructures could lead to new compounds as novel alternative materials for biological applications. Lipase MG10 was successfully immobilized on the mentioned nanofibrous composites and biochemically characterized. The lipase activity of free and immobilized lipases was considered by measuring the absorbance of pNPP (500 μM in 40 mM Tris/HCl buffer, pH 7.8, and 0.01% Triton X100) at 37 °C for 30 min. Different concentrations of glutaraldehyde, different crosslinking times, different times of immobilization, different enzyme loading, and different pH values have been optimized. Results showed that the optimized immobilization condition was achieved in 2.5% glutaraldehyde, after 2 h of crosslinking time, after 6 h immobilization time, using 180 mg protein/g support at pH 9.0. The immobilized enzyme was also totally stable after 180 min incubation at 60 °C. The free enzyme showed the maximum activity at pH 9.0, but the optimal pH of the immobilized lipase was shifted about 1.5 pH units to the alkaline area. The immobilized lipase showed about 2.7 folds (78%) higher stability than the free enzyme at 50 °C. Some divalent metal ions, including Cu²⁺ (22%), Co²⁺ (37%), Mg²⁺ (12%), Hg²⁺ (11%), and Mn²⁺ (17%) enhanced the enzyme activity of immobilized enzyme. The maximum biodiesel production (27%) from R. communis oil was obtained after 18 h of incubation by lipase MG10. The immobilized lipase displayed high potency in biodiesel production, about 83% after 12 h of incubation. These results indicated the high potency of Zr-MOF/PVP nanofibrous composites for efficient lipase immobilization.

A Novel Cascade Nanoreactor Integrating Two-Dimensional Pd-Ru Nanozyme, Uricase and Red Blood Cell Membrane for Highly Efficient Hyperuricemia Treatment

Nanozyme-based cascade reaction has emerged as an effective strategy for disease treatment because of its high efficiency and low side effects. Herein, a new and highly active two-dimensional Pd-Ru nanozyme is prepared and then integrated with uricase and red blood cell (RBC) membrane to fabricate a tandem nanoreactor, Pd-Ru/Uricase@RBC, for hyperuricemia treatment. The designed Pd-Ru/Uricase@RBC nanoreactor displayed not only good stability against extreme pH, temperature and proteolytic degradation, but also long circulation half-life and excellent safety. The nanoreactor can effectively degrade UA by uricase to allantoin and H₂ O₂ and remove H₂ O₂ by using Pd-Ru nanosheets (NSs) with the catalase (CAT)-like activity. More importantly, the finally produced O₂ from H₂ O₂ decomposition can in turn facilitate the catalytic oxidation of UA, as the degradation of UA is an O₂ consumption process. By integrating the high-efficiency enzymatic activity, long circulation capability, and good biocompatibility, the designed Pd-Ru/Uricase@RBC can effectively and safely treat hyperuricemia without side effects. The study affords a new alternative for the exploration of clinical treatment of hyperuricemia.

Nanomaterials in the Management of Gram-Negative Bacterial Infections

The exploration of multiplexed bacterial virulence factors is a major problem in the early stages of Escherichia coli infection therapy. Traditional methods for detecting Escherichia coli (E. coli), such as serological experiments, immunoassays, polymerase chain reaction, and isothermal microcalorimetry have some drawbacks. As a result, detecting E. coli in a timely, cost-effective, and sensitive manner is critical for various areas of human safety and health. Intelligent devices based on nanotechnology are paving the way for fast and early detection of E. coli at the point of care. Due to their specific optical, magnetic, and electrical capabilities, nanostructures can play an important role in bacterial sensors. Another one of the applications involved use of nanomaterials in fighting microbial infections, including E. coli mediated infections. Various types of nanomaterials, either used directly as an antibacterial agent such as metallic nanoparticles (NPs) (silver, gold, zinc, etc.), or as a nanocarrier to deliver and target the antibiotic to the E. coli and its infected area. Among different types, polymeric NPs, lipidic nanocarriers, metallic nanocarriers, nanomicelles, nanoemulsion/ nanosuspension, dendrimers, graphene, etc. proved to be effective vehicles to deliver the drug in a controlled fashion at the targeted site with lower off-site drug leakage and side effects.

Facile in situ microwave synthesis of Fe3O4@MIL-100(Fe) exhibiting enhanced dual enzyme mimetic activities for colorimetric glutathione sensing

In recent decades, artificial nanozymes with excellent stability, low cost and availability have been gradually explored to avoid the limits of natural enzymes such as poor stability, high cost and difficult preparation. Herein, for the first time, we investigated the capability of nanoscale Fe₃O₄@MIL-100(Fe) as a nanozyme, which was quickly synthesized in situ by a microwave-assisted method within 20 min using Fe₃O₄ as the metal precursor. The obtained Fe₃O₄@MIL-100(Fe) showed satisfactory intrinsic dual enzyme mimetic activities, including peroxidase (POD)- and catalase (CAT)-like activities. Moreover, a simple and effective colorimetric biosensor was fabricated to detect glutathione (GSH) based on its POD-like activity. The proposed measurement had a linear range of 1-45 μM and a limit of detection (LOD) of 0.26 μM (3.3 δ/S). It was proved that the established colorimetric sensing system could be successfully applied to detect GSH in actual biological samples. Importantly, the outstanding reusability and stability made it extremely valuable as a catalyst. The present work implied that Fe₃O₄@MIL-100(Fe) synthesized in situ by the microwave-assisted method was a very promising candidate for biocatalyst and biosensing.

Study on performance of mimic uricase and its application in enzyme-free analysis

Nanozymes were the novel research field to replace natural enzymes because of stability and low cost. However, the research on nanozymes was mainly focused on peroxidase, and there was little research about nanozymes with oxidase-like activity, especially mimic oxidase of small molecules related to human physiology. High levels of uric acid (UA) in the body can cause hyperuricemia and gout. And natural uricase cured this disease because it could oxidize UA. The oxidase-like activity of mixed valence state metal organic frameworks with cerium (MVSM) had been studied, but MVSM was found to have uricase-like activity in this article. The catalytic process of UA with MVSM was studied by a variety of analytical methods, which was similar to the natural uricase except for further oxidation of H₂O₂. The catalytic activity constants of MVSM were acquired by the Michaelis-Menten equation. MVSM had a better ability to catalyze UA in in vivo and in vitro experiments. An enzyme-free analysis-based mimic uricase for UA was established. All the experimental results proved that MVSM had a good prospect to replace the natural uricase. A nanomaterial, mixed valence state Ce-MOF (MVSM), with uricase-like activity has been found in vivo and in vitro. This material has potential to be a fluorescent analysis for detecting uric acid without uricase.

Ultrasensitive SERS detection of exhaled biomarkers of lung cancer using a multifunctional solid phase extraction membrane

The construction and clinical application of a surface-enhanced Raman scattering (SERS) platform for the early diagnosis of lung cancer could improve the survival rate of patients and would be of great significance. Nevertheless, a sensitive and reusable method for the detection of aldehydes, as biomarkers of lung cancer, in exhaled breath is still an enormous challenge. Aldehydes generally have a low cross section in Raman scattering and have a weak specific affinity to plasmonic nanoparticle surfaces, meaning that sensing them at low concentrations is incredibly difficult. Herein, an ultrasensitive SERS strategy, that can be recycled for further use, for the detection of lung cancer biomarkers in the form of aldehydes was realized by fabrication of a multifunctional Ag NPs@ZIF-67/g-C₃N₄ solid phase extraction (SPE) membrane. Based on the change in the vibrational fingerprints of 4-ATP before and after reaction with the aldehydes, the SPE membrane was successfully used for the ultrasensitive detection of aldehydes with a detection limit of 1.35 nM. The excellent SERS performance was attributed to the synergistic effect of the densely and closely distributed Ag NPs (providing SERS "hot spots"), ZIF-67 (concentrating the analyte molecules) and g-C₃N₄ (forming a membrane to prolong the contact time between the aldehydes and the substrate). In addition, recycling of the SPE membrane was achieved by utilizing the self-cleaning ability of the Ag NPs@ZIF-67/g-C₃N₄ membrane originating from the photocatalytic properties of g-C₃N₄. The proposed SERS membrane was easy to operate, rapid and portable, thus providing a potential tool for a point-of-care test in clinical and diagnostic practice.

A petal-shaped MOF assembled with a gold nanocage and urate oxidase used as an artificial enzyme nanohybrid for tandem catalysis and dual-channel biosensing

A facile one-pot precipitation method was employed to prepare a petal-shaped hybrid under mild conditions. The hybrid is composed of urate oxidase (UOx) encapsulated into a zeolite-like metal-organic framework (MOF) with the doping of a hollow gold nanocage (AuNC). As one of the MOF-enzyme composites, a UOx@MOF(AuNC) hybrid with the features of artificial nanoenzymes was developed as a novel dual-channel biosensing platform for fluorescence (FL) and electrochemical detection of uric acid (UA). As for FL biosensing, enzymatic catalysis of the hybrid in the presence of UA triggered tandem catalysis and oxidation reactions to cause FL quenching. UA was linearly detected in the 0.1-10 μM and 10-300 μM ranges, with the limit of detection (LOD) of 20 nM. As for electrochemical biosensing, the hybrid was dropped on a glassy carbon electrode (GCE) surface to construct a hybrid/GCE platform. Based on the redox reaction of UA on the platform surface, UA was linearly detected in the 0.05-55 μM range, with a LOD of 15 nM. Experimental results confirmed that the hybrid-based dual-channel biosensing platform enabled selective and sensitive responses to UA over potential interferents. The platform has an excellent detection capability in physiological samples. The dual-channel biosensing platform facilitates the exploration of new bioanalysis techniques for early clinical diagnosis of diseases.

Architecture of a multi-channel and easy-to-make microfluidic paper-based colorimetric device (μPCD) towards selective and sensitive recognition of uric acid by AuNPs: an innovative portable tool for the rapid and low-cost identification of clinically relevant biomolecules

Uric acid (UA) is the end product of purine metabolism. Uric acid is usually excreted in the urine, but its abnormal increase and toxic amount can lead to diseases such as gout, hyperuricemia, Lesch-Nyhan syndrome, and cardiovascular disease. On the other hand, UA reduction can lead to neurodegenerative diseases such as sarcoma, glioblastoma, Hodgkin, and etc. Therefore, rapid identification of UA is of great importance. In this work, a simple, portable, inexpensive, and fast microfluidic paper-based colorimetric sensor based on the color change in the presence of UA by using AuNPs was developed. The results can be easily identified with naked eye and further confirmed by UV-vis spectrophotometry. In this method, iron pattern and fiberglass paper were used to construct diagnostic areas and hydrophilic microfluidic channels. We greatly reduced the preparation time of this pattern using a magnet (about three minutes). In this work, four types of nanoparticles with different lower limit of quantification (LLOQ) were used. Linear range of 10-6 to 10-3 M and LLOQ of 10-6 M were obtained for the determination of uric acid using AuNPs-CysA as optical probe. Also, by AuNPs as optical probe a linear range of 10-4 to 10-2 M and the obtained LLOQ was 10-4 M. Finally, by AuNFs as optical probe linear range from 10-6 to 10-2 M and 5 × 10-5 to 10-2 M along with LLOQ of 10-6 and 5 × 10-5 M, respectively. The designed system successfully studied in human urine samples.