Emerging ultrafast nucleic acid amplification technologies for next-generation molecular diagnostics

Plasmonic-Driven Regulation of Biomolecular Activity In Situ

Selective and remote manipulation of activity for biomolecules, including protein, DNA, and lipids, is crucial to elucidate their molecular function and to develop biomedical applications. While advances in tool development, such as optogenetics, have significantly impacted these directions, the requirement for genetic modification significantly limits their therapeutic applications. Plasmonic nanoparticle heating has brought new opportunities to the field, as hot nanoparticles are unique point heat sources at the nanoscale. In this review, we summarize fundamental engineering problems such as plasmonic heating and the resulting biomolecular responses. We highlight the biological responses and applications of manipulating biomolecules and provide perspectives for future directions in the field.

New insight in molecular detection of Mycobacterium tuberculosis

Mycobacterium tuberculosis, the causative agent of tuberculosis, is a pathogenic bacterium that has claimed millions of lives since the Middle Ages. According to the World Health Organization's report, tuberculosis ranks among the ten deadliest diseases worldwide. The presence of an extensive array of genes and diverse proteins within the cellular structure of this bacterium has provided us with a potent tool for diagnosis. While the culture method remains the gold standard for tuberculosis diagnosis, it is possible that molecular diagnostic methods, emphasis on the identification of mutation genes (e.g., rpoB and gyrA) and single nucleotide polymorphisms, could offer a safe and reliable alternative. Over the past few decades, as our understanding of molecular genetics has expanded, methods have been developed based on gene expansion and detection. These methods typically commence with DNA amplification through nucleic acid targeted techniques such as polymerase chain reaction. Various molecular compounds and diverse approaches have been employed in molecular assays. In this review, we endeavor to provide an overview of molecular assays for the diagnosis of tuberculosis with their properties (utilization, challenges, and functions). The ultimate goal is to explore the potential of replacing traditional bacterial methods with these advanced molecular diagnostic techniques.

Microfluidic point-of-care testing for the detection of Bordetella pertussis: A mini-review

Bordetella pertussis is a bacterial pathogen responsible for pertussis, which is a highly contagious respiratory disease. Despite the relatively high vaccination coverage, pertussis is considered a reemerging disease that necessitates enhanced strategies for identification, prevention, and control. The diagnosis of pertussis typically involves a combination of clinical evaluation, laboratory tests, and a thorough medical history. The current technologies for pertussis diagnosis have their own limitations, prompting the exploration of alternative diagnostic approaches that offer enhanced sensitivity, specificity, and speed. Microfluidic technology is considered a very promising tool for the diagnosis of infectious diseases, as it offers more rapid and accurate outputs. It allows point-of-care testing (POCT) at or near the patient site, which can be critical, especially for an outbreak or pandemic. In this paper, current pertussis diagnostic tools with their limitations were discussed, and microfluidic approaches for the diagnosis of pertussis were highlighted.

Rapid and accurate SERS assay of disease-related nucleic acids based on isothermal cascade signal amplifications of CRISPR/Cas13a system and catalytic hairpin assembly

Developing rapid, accurate and convenient nucleic acid diagnostic techniques is essential for the prevention and control of contagious diseases that are prone to gene mutations and may have homologous sequences, especially emerging infectious diseases such as the SARS-CoV-2 pandemic. Herein, a one-pot SERS assay integrating isothermal cascade signal amplification strategy (i.e., CRISPR/Cas13a system (Cas13a) and catalytic hairpin assembly (CHA), Cas13a-CHA) and SERS-active silver nanorods (AgNRs) sensing chips was proposed for rapid and accurate detection of disease-related nucleic acids. Taking SARS-CoV-2 RNA assay as a model, the Cas13a-CHA based SERS sensing strategy can achieve ultra-high sensitivity low to 5.18 × 102 copies·mL-1 within 60 min, and excellent specificity, i.e., not only the ability to identify SARS-CoV-2 RNA from gene mutations, but also incompatibility with coronaviruses such as severe acute respiratory syndrome (SARS-CoV), Middle East respiratory syndrome (MERS-CoV), and other respiratory viruses. The proposed Cas13a-CHA based SERS assay for SARS-CoV-2 RNA has satisfactory sensitivity, specificity, uniformity, and repeatability, and can be easily expanded and universalized for screening different viruses, which is expected to promise as a crucial role for diagnosis of disease-related nucleic acids in various medical application scenarios.

Molecular Point-of-Care Assay Development: Design and Considerations

Molecular diagnostic point-of-care (MDx POC) testing is gaining momentum and is increasingly important for infectious disease detection and monitoring, as well as other diagnostic areas such as oncology. Molecular testing has traditionally required high-complexity laboratories. Laboratory testing complexity is determined by utilizing the Clinical Laboratory Improvement Amendments of 1988 (CLIA) Categorization Criteria scorecard, utilizing seven criteria that are scored on a scale of one to three. Previously, most commercially available point-of-care (POC) tests use other analytes and technologies that were not found to be highly complex by the CLIA scoring system. However, during the COVID-19 pandemic, MDx POC testing became much more prominent. Utilization during the COVID-19 pandemic has demonstrated that MDx POC testing applications can have outstanding advantages compared to available non-molecular POC diagnostic tests. This article introduces MDx POC testing to students, technologists, researchers, and others, providing a general algorithm for MDx POC test development. This algorithm is an introductory, step-by-step decision tree for defining a molecular POC diagnostic device meeting the functional requirements for a desired application. The technical considerations driving the decision-making include nucleic acid selection method (DNA, RNA), extraction methods, sample preparation, number of targets, amplification technology, and detection method. The scope of this article includes neither higher-order multiplexing, nor quantitative molecular analysis. This article covers key application considerations, such as sensitivity, specificity, turnaround time, and shipping/storage requirements. This article provides an overall understanding of the best resources and practices to use when developing a MDx POC assay that may be a helpful resource for readers without extensive molecular testing experience as well as for those who are already familiar with molecular testing who want to increase MDx availability at the POC. © 2024 Wiley Periodicals LLC.

Laboratory tools for the direct detection of bacterial respiratory infections and antimicrobial resistance: a scoping review

Rapid laboratory tests are urgently required to inform antimicrobial use in food animals. Our objective was to synthesize knowledge on the direct application of long-read metagenomic sequencing to respiratory samples to detect bacterial pathogens and antimicrobial resistance genes (ARGs) compared to PCR, loop-mediated isothermal amplification, and recombinase polymerase amplification. Our scoping review protocol followed the Joanna Briggs Institute and PRISMA Scoping Review reporting guidelines. Included studies reported on the direct application of these methods to respiratory samples from animals or humans to detect bacterial pathogens ±ARGs and included turnaround time (TAT) and analytical sensitivity. We excluded studies not reporting these or that were focused exclusively on bioinformatics. We identified 5,636 unique articles from 5 databases. Two-reviewer screening excluded 3,964, 788, and 784 articles at 3 levels, leaving 100 articles (19 animal and 81 human), of which only 7 studied long-read sequencing (only 1 in animals). Thirty-two studies investigated ARGs (only one in animals). Reported TATs ranged from minutes to 2 d; steps did not always include sample collection to results, and analytical sensitivity varied by study. Our review reveals a knowledge gap in research for the direct detection of bacterial respiratory pathogens and ARGs in animals using long-read metagenomic sequencing. There is an opportunity to harness the rapid development in this space to detect multiple pathogens and ARGs on a single sequencing run. Long-read metagenomic sequencing tools show potential to address the urgent need for research into rapid tests to support antimicrobial stewardship in food animal production.

Cascaded signal amplification strategy for ultra-specific, ultra-sensitive, and visual detection of Shigella flexneri

Pathogen infections including Shigella flexneri have posed a significant threat to human health for numerous years. Although culturing and qPCR were the gold standards for pathogen detection, time-consuming and instrument-dependent restrict their application in rapid diagnosis and economically less-developed regions. Thus, it is urgently needed to develop rapid, simple, sensitive, accurate, and low-cost detection methods for pathogen detection. In this study, an immunomagnetic beads-recombinase polymerase amplification-CRISPR/Cas12a (IMB-RPA-CRISPR/Cas12a) method was built based on a cascaded signal amplification strategy for ultra-specific, ultra-sensitive, and visual detection of S. flexneri in the laboratory. Firstly, S. flexneri was specifically captured and enriched by IMB (Shigella antibody-coated magnetic beads), and the genomic DNA was released and used as the template in the RPA reaction. Then, the RPA products were mixed with the pre-loaded CRISPR/Cas12a for fluorescence visualization. The results were observed by naked eyes under LED blue light, with a sensitivity of 5 CFU/mL in a time of 70 min. With no specialized equipment or complicated technical requirements, the IMB-RPA-CRISPR/Cas12a diagnostic method can be used for visual, rapid, and simple detection of S. flexneri and can be easily adapted to monitoring other pathogens.

Biological Applications of Thermoplasmonics

Thermoplasmonics has emerged as an extraordinarily versatile tool with profound applications across various biological domains ranging from medical science to cell biology and biophysics. The key feature of nanoscale plasmonic heating involves remote activation of heating by applying laser irradiation to plasmonic nanostructures that are designed to optimally convert light into heat. This unique capability paves the way for a diverse array of applications, facilitating the exploration of critical biological processes such as cell differentiation, repair, signaling, and protein functionality, and the advancement of biosensing techniques. Of particular significance is the rapid heat cycling that can be achieved through thermoplasmonics, which has ushered in remarkable technical innovations such as accelerated amplification of DNA through quantitative reverse transcription polymerase chain reaction. Finally, medical applications of photothermal therapy have recently completed clinical trials with remarkable results in prostate cancer, which will inevitably lead to the implementation of photothermal therapy for a number of diseases in the future. Within this review, we offer a survey of the latest advancements in the burgeoning field of thermoplasmonics, with a keen emphasis on its transformative applications within the realm of biosciences.

Solid-State Nanopore Sensors with Enhanced Sensitivity through Nucleic Acid Amplification

Solid-state nanopores have wide applications in DNA sequencing, energy conversion and storage, seawater desalination, sensors, and reactors due to their high stability, controllable geometry, and a variety of pore-forming materials. Solid-state nanopore sensors can be used for qualitative and quantitative analyses of ions, small molecules, proteins, and nucleic acids. The combination of nucleic acid amplification and solid-state nanopores to achieve trace detection of analytes is gradually attracting attention. This review outlines nucleic acid amplification strategies for enhancing the sensitivity of solid-state nanopore sensors by summarizing the articles published in the past 10 years. The future development prospects and challenges of nucleic acid amplification in solid-state nanopore sensors are discussed. This review helps readers better understand the field of solid-state nanopore sensors. We believe that solid-state nanopore sensors will break through the bottleneck of traditional detection and become a powerful single-molecule detection platform.

Rapid detection of Salmonella in food matrices by photonic PCR based on the photothermal effect of Fe3O4

Salmonella causes most deaths from diarrheal disease worldwide. Therefore, Salmonella must be accurately and quickly detected, even in complex food matrices, which is difficult to achieve using conventional culture methods. Here we propose a novel photonic polymerase chain reaction (PCR) method based on ferroferric oxide (Fe3O4) for the detection of Salmonella typhimurium in complex samples. Owing to the great photothermal conversion performance of Fe3O4, rapid thermal cycling could be accomplished. Our optimized photonic PCR system specifically detected Salmonella typhimurium in complex food matrices within 50 min. Quantitative data showed a limit of detection up to 102 CFU/mL in food samples. This method is suitable for the detection of all pathogenic microorganisms and is universal.

Current and Future Technologies for the Detection of Antibiotic-Resistant Bacteria

Antibiotic resistance is a global public health concern, posing a significant threat to the effectiveness of antibiotics in treating bacterial infections. The accurate and timely detection of antibiotic-resistant bacteria is crucial for implementing appropriate treatment strategies and preventing the spread of resistant strains. This manuscript provides an overview of the current and emerging technologies used for the detection of antibiotic-resistant bacteria. We discuss traditional culture-based methods, molecular techniques, and innovative approaches, highlighting their advantages, limitations, and potential future applications. By understanding the strengths and limitations of these technologies, researchers and healthcare professionals can make informed decisions in combating antibiotic resistance and improving patient outcomes.

Mobile Efficient Diagnostics of Infectious Diseases via On-Chip RT-qPCR: MEDIC-PCR

The COVID-19 outbreak has caused public and global health crises. However, the lack of on-site fast, reliable, sensitive, and low-cost reverse transcription polymerase chain reaction (RT-PCR) testing limits early detection, timely isolation, and epidemic prevention and control. Here, the authors report a rapid mobile efficient diagnostics of infectious diseases via on-chip -RT-quantitative PCR (RT-qPCR): MEDIC-PCR. First, the authors use a roll-to-roll printing process to accomplish low-cost carbon-black-based disposable PCR chips that enable rapid LED-induced photothermal PCR cycles. The MEDIC-PCR can perform RT (3 min), and PCR (9 min) steps. Further, the cohort of 89 COVID-19 and 103 non-COVID-19 patients testing is completed by the MEDIC-PCR to show excellent diagnostic accuracy of 97%, sensitivity of 94%, and specificity of 98%. This MEDIC-PCR can contribute to the preventive global health in the face of a future pandemic.

Next-generation diagnostic test for dengue virus detection using an ultrafast plasmonic colorimetric RT-PCR strategy

The current global COVID-19 pandemic once again highlighted the urgent need for a simple, cost-effective, and sensitive diagnostic platform that can be rapidly developed for distribution and easy access in resource-limited areas. Here, we present a simple and low-cost plasmonic photothermal (PPT)-reverse transcription-colorimetric polymerase chain reaction (RTcPCR) for molecular diagnosis of dengue virus (DENV) infection. The assay can be completed within 54 min with an estimated detection limit of 1.6 copies/μL of viral nucleic acid. The analytical sensitivity and specificity of PPT-RTcPCR were comparable to that of the reference RT-qPCR assay. Moreover, the clinical performance of PPT-RTcPCR was evaluated and validated using 158 plasma samples collected from patients suspected of dengue infection. The results showed a diagnostic agreement of 97.5% compared to the reference RT-qPCR and demonstrated a clinical sensitivity and specificity of 97.0% and 100%, respectively. The simplicity and reliability of our PPT-RTcPCR strategy suggest it can provide a foundation for developing a field-deployable diagnostic assay for dengue and other infectious diseases.

Normalized Multipotential Redox Coding of DNA Bases for Determination of Total Nucleotide Composition

The previously reported approach of orthogonal multipotential redox coding of all four DNA bases allowed only analysis of the relative nucleotide composition of short DNA stretches. Here, we present two methods for normalization of the electrochemical readout to facilitate the determination of the total nucleotide composition. The first method is based on the presence or absence of an internal standard of 7-deaza-2'-deoxyguanosine in a DNA primer. The exact composition of the DNA was elucidated upon two parallel analyses and the subtraction of the electrochemical signal intensities. The second approach took advantage of a 5'-viologen modified primer, with this fifth orthogonal redox label acting as a reference for signal normalization, thus allowing accurate electrochemical sequence analysis in a single read. Both approaches were tested using various sequences, and the voltammetric signals obtained were normalized using either the internal standard or the reference label and demonstrated to be in perfect agreement with the actual nucleotide composition, highlighting the potential for targeted DNA sequence analysis.

SERS-based rapid susceptibility testing of commonly administered antibiotics on clinically important bacteria species directly from blood culture of bacteremia patients

Bloodstream infections are a growing public health concern due to emerging pathogens and increasing antimicrobial resistance. Rapid antibiotic susceptibility testing (AST) is urgently needed for timely and optimized choice of antibiotics, but current methods require days to obtain results. Here, we present a general AST protocol based on surface-enhanced Raman scattering (SERS-AST) for bacteremia caused by eight clinically relevant Gram-positive and Gram-negative pathogens treated with seven commonly administered antibiotics. Our results show that the SERS-AST protocol achieves a high level of agreement (96% for Gram-positive and 97% for Gram-negative bacteria) with the widely deployed VITEK 2 diagnostic system. The protocol requires only five hours to complete per blood-culture sample, making it a rapid and effective alternative to conventional methods. Our findings provide a solid foundation for the SERS-AST protocol as a promising approach to optimize the choice of antibiotics for specific bacteremia patients. This novel protocol has the potential to improve patient outcomes and reduce the spread of antibiotic resistance.

A fully-enclosed prototype 'pen' for rapid detection of SARS-CoV-2 based on RT-RPA with dipstick assay at point-of-care testing

A fully-enclosed prototype 'pen' for rapid detection of SARS-CoV-2 based on reverse transcriptase isothermal recombinase polymerase amplification (RT-RPA) with dipstick assay was developed. The integrated handheld device, consisting of amplification, detection and sealing modules, was developed to perform rapid nucleic acid amplification and detection under a fully enclosed condition. After RT-RPA amplification with a metal bath or a normal PCR instrument, the amplicons were mixed with dilution buffer prior to being detected on a lateral flow strip. To avoid aerosol contamination causing false-positive, from amplification to final detection, the detection 'pen' had been enclosed to isolate from the environment. With colloidal gold strip-based detection, the detection results could be directly observed by eyes. By cooperating with other inexpensive and rapid methods for POC nucleic acid extraction, the developed 'pen' could detect COVID-19 or other infectious diseases in a convenient, simple and reliable way.

Rapid PCR kit: lateral flow paper strip with Joule heater for SARS-CoV-2 detection

Polymerase chain reaction (PCR)-based diagnostic kits for point-of-care (POC) testing are highly desirable to prevent the spread of infectious diseases. Here, we demonstrate a rapid PCR testing kit that involves integrating a lateral flow paper strip with a nichrome-based thin film heater. The use of a paper membrane as a PCR-solution container results in fast thermocycling without a cooler because the membrane can contain the solution with a high specific surface area where Joule heating is applied. After PCR, amplified products are simultaneously detected at the lateral flow paper strip with the naked eye. Severe acute respiratory syndrome β-coronavirus RNA can be detected within 30 min after PCR solution injection. This work reveals that the paper membrane can act as not only a capillary flow channel but also as a promising platform for fast PCR and detection.

Ultrafast Plasmonic Nucleic Acid Amplification and Real-Time Quantification for Decentralized Molecular Diagnostics

Point-of-care real-time reverse-transcription polymerase chain reaction (RT-PCR) facilitates the widespread use of rapid, accurate, and cost-effective near-patient testing that is available to the public. Here, we report ultrafast plasmonic nucleic acid amplification and real-time quantification for decentralized molecular diagnostics. The plasmonic real-time RT-PCR system features an ultrafast plasmonic thermocycler (PTC), a disposable plastic-on-metal (PoM) cartridge, and an ultrathin microlens array fluorescence (MAF) microscope. The PTC provides ultrafast photothermal cycling under white-light-emitting diode illumination and precise temperature monitoring with an integrated resistance temperature detector. The PoM thin film cartridge allows rapid heat transfer as well as complete light blocking from the photothermal excitation source, resulting in real-time and highly efficient PCR quantification. Besides, the MAF microscope exhibits close-up and high-contrast fluorescence microscopic imaging. All of the systems were fully packaged in a palm size for point-of-care testing. The real-time RT-PCR system demonstrates the rapid diagnosis of coronavirus disease-19 RNA virus within 10 min and yields 95.6% of amplification efficiency, 96.6% of classification accuracy for preoperational test, and 91% of total percent agreement for clinical diagnostic test. The ultrafast and compact PCR system can decentralize point-of-care molecular diagnostic testing in primary care and developing countries.

THz-PCR Based on Resonant Coupling between Middle Infrared and DNA Carbonyl Vibrations

The carbonyl groups of deoxyribonucleotide can resonantly couple with 53 THz middle infrared, which can highly transmit water without ionization-based damage to DNA molecules. Herein, we predict that vibrational coupling with THz irradiation could lower down the hybridization landscape of nucleic acids and thus affect DNA replication. Using polymerase chain reaction (PCR) as a measure, we found that THz shining can reduce the denature temperature of DNA duplexes by about 3 °C, which allows one to conduct PCR at lower temperature, facilitating long-time amplification reaction without losing enzymatic fidelity, i.e., normal PCR should be carried out at denaturing temperature ∼4 °C higher than the melting temperature (T_m), but THz-PCR only requires temperature ∼1 °C higher than T_m due to the nonthermal effect of THz shining. Moreover, the melting time can also be shortened to 1/5 due to the enhanced vibration coupling with 53 THz irradiation. We proposed THz-PCR as an innovated DNA amplification technique with ultrahigh specificity and sensitivity and also successfully demonstrated its advantages in forensic detections.

Ultrafast Nucleic Acid Detection Equipment with Silicon-Based Microfluidic Chip

Recently, infectious diseases, such as COVID-19, monkeypox, and Ebola, are plaguing human beings. Rapid and accurate diagnosis methods are required to preclude the spread of diseases. In this paper, an ultrafast polymerase chain reaction (PCR) equipment is designed to detect virus. The equipment consists of a silicon-based PCR chip, a thermocycling module, an optical detection module, and a control module. Silicon-based chip, with its thermal and fluid design, is used to improve detection efficiency. A thermoelectric cooler (TEC), together with a computer-controlled proportional-integral-derivative (PID) controller, is applied to accelerate the thermal cycle. A maximum of four samples can be tested simultaneously on the chip. Two kinds of fluorescent molecules can be detected by optical detection module. The equipment can detect viruses with 40 PCR amplification cycles in 5 min. The equipment is portable, easily operated, and low equipment cost, which shows great potential in epidemic prevention.

Enzyme-Assisted Nucleic Acid Amplification in Molecular Diagnosis: A Review

Infectious diseases and tumors have become the biggest medical challenges in the 21st century. They are driven by multiple factors such as population growth, aging, climate change, genetic predispositions and more. Nucleic acid amplification technologies (NAATs) are used for rapid and accurate diagnostic testing, providing critical information in order to facilitate better follow-up treatment and prognosis. NAATs are widely used due their high sensitivity, specificity, rapid amplification and detection. It should be noted that different NAATs can be selected according to different environments and research fields; for example, isothermal amplification with a simple operation can be preferred in developing countries or resource-poor areas. In the field of translational medicine, CRISPR has shown great prospects. The core component of NAAT lies in the activity of different enzymes. As the most critical material of nucleic acid amplification, the key role of the enzyme is self-evident, playing the upmost important role in molecular diagnosis. In this review, several common enzymes used in NAATs are compared and described in detail. Furthermore, we summarize both the advances and common issues of NAATs in clinical application.

Flap Endonuclease-Induced Steric Hindrance Change Enables the Construction of Multiplex and Versatile Lateral Flow Strips for DNA Detection

A lateral flow strip (LFS) is an ideal tool for point-of-care testing (POCT), but traditional LFSs cannot be used for multiplex detection. Herein, a multiplex and versatile LFS based on flap endonuclease 1 (FEN1)-induced steric hindrance change (FISH-LFS) is proposed. In this method, multiplex PCR coupled with cascade invasive reactions was employed to yield single-stranded flaps, which were target-specific but independent of target sequences. Then, the amplicons were applied for FISH-LFS, and the single-stranded flaps would be efficiently captured by the complementary LFS-probes at different test lines. As flaps were cleaved from the specially designed hairpin probes, competition among flaps and hairpin probes would occur in capturing the probes at test lines. We enabled the hairpin probes to flow through the test lines while the flaps to stay at the test lines by making use of the difference in steric hindrance between hairpin probes and flaps. The assay is able to detect as low as two copies of blood pathogens (HBV, HCV, and HIV), to pick up as low as 0.1% mutants from wild-type gDNA, and to genotype 200 copies of SARS-CoV-2 variants α and β within 75 min at a conventional PCR engine. As the method is free of dye, a portable PCR engine could be used for a cost-effective multiplex detection on site. Results using an ultrafast mobile PCR system for FISH-LFS showed that as fast as 30 min was achieved for detecting three pathogens (HBV, HCV, and HIV) in blood, very suitable for POCT of pathogen screening. The method is convenient in operation, simple in instrumentation, specific in genotyping, and very easy in setting up multiplex POCT assays.

CRISPR-Cas-based techniques for pathogen detection: Retrospect, recent advances, and future perspectives

BACKGROUND

Early detection of pathogen-associated diseases are critical for effective treatment. Rapid, specific, sensitive, and cost-effective diagnostic technologies continue to be challenging to develop. The current gold standard for pathogen detection, polymerase chain reaction technology, has limitations such as long operational cycles, high cost, and high technician and instrumentation requirements.

AIM OF REVIEW

This review examines and highlights the technical advancements of CRISPR-Cas in pathogen detection and provides an outlook for future development, multi-application scenarios, and clinical translation.

KEY SCIENTIFIC CONCEPTS OF REVIEW

Approaches enabling clinical detection of pathogen nucleic acids that are highly sensitive, specific, cheap, and portable are necessary. CRISPR-Cas9 specificity in targeting nucleic acids and "collateral cleavage" activity of CRISPR-Cas12/Cas13/Cas14 show significant promise in nucleic acid detection technology. These methods have a high specificity, versatility, and rapid detection cycle. In this paper, CRISPR-Cas-based detection methods are discussed in depth. Although CRISPR-Cas-mediated pathogen diagnostic solutions face challenges, their powerful capabilities will pave the way for ideal diagnostic tools.

Capture, detection and purification of dsDNA amplicons using a DNA binding protein on magnetic beads

Magnetic separation has been widely exploited for capture and detection of nucleic acids, including amplicons. Streptavidin-magnetic beads (SA-MB) are typically employed for this purpose, as well as in biosensing applications. However, remaining biotinylated primer in the amplification reaction can compete with labeled amplicon for binding to the beads. Also, the harsh conditions needed for elution of bound amplicons restrict their use for purification purposes. Herein we show that a sequence-specific DNA binding protein immobilized on magnetic beads can serve as an alternative to SA-MB for these applications. This is enabled by the high binding affinity of scCro DNA binding protein for its specific sequence and its ability to bind dsDNA but not ssDNA. This specific sequence is easily incorporated in the amplicon during amplification with an extended primer. The scCro-MB exhibited higher amplicon binding capacity and detection sensitivity compared to SA-MB when both synthetic and genomic DNA were used as templates for PCR. This resulted not only from increased protein load on the beads but also from minimized interference of excess labeled primer remaining in the unpurified amplification reactions. Finally, a proof-of-concept was provided for the use of the scCro-MB for PCR amplicon purification under mild elution conditions using salt.

Detection of respiratory viruses directly from clinical samples using next-generation sequencing: A literature review of recent advances and potential for routine clinical use

Acute respiratory infection is the third most frequent cause of mortality worldwide, causing over 4.25 million deaths annually. Although most diagnosed acute respiratory infections are thought to be of viral origin, the aetiology often remains unclear. The advent of next‐generation sequencing (NGS) has revolutionised the field of virus discovery and identification, particularly in the detection of unknown respiratory viruses. We systematically reviewed the application of NGS technologies for detecting respiratory viruses from clinical samples and outline potential barriers to the routine clinical introduction of NGS. The five databases searched for studies published in English from 01 January 2010 to 01 February 2021, which led to the inclusion of 52 studies. A total of 14 different models of NGS platforms were summarised from included studies. Among these models, second‐generation sequencing platforms (e.g., Illumina sequencers) were used in the majority of studies (41/52, 79%). Moreover, NGS platforms have proven successful in detecting a variety of respiratory viruses, including influenza A/B viruses (9/52, 17%), SARS‐CoV‐2 (21/52, 40%), parainfluenza virus (3/52, 6%), respiratory syncytial virus (1/52, 2%), human metapneumovirus (2/52, 4%), or a viral panel including other respiratory viruses (16/52, 31%). The review of NGS technologies used in previous studies indicates the advantages of NGS technologies in novel virus detection, virus typing, mutation identification, and infection cluster assessment. Although there remain some technical and ethical challenges associated with NGS use in clinical laboratories, NGS is a promising future tool to improve understanding of respiratory viruses and provide a more accurate diagnosis with simultaneous virus characterisation.

Recent Trends in AI-Based Intelligent Sensing

In recent years, intelligent sensing has gained significant attention because of its autonomous decision-making ability to solve complex problems. Today, smart sensors complement and enhance the capabilities of human beings and have been widely embraced in numerous application areas. Artificial intelligence (AI) has made astounding growth in domains of natural language processing, machine learning (ML), and computer vision. The methods based on AI enable a computer to learn and monitor activities by sensing the source of information in a real-time environment. The combination of these two technologies provides a promising solution in intelligent sensing. This survey provides a comprehensive summary of recent research on AI-based algorithms for intelligent sensing. This work also presents a comparative analysis of algorithms, models, influential parameters, available datasets, applications and projects in the area of intelligent sensing. Furthermore, we present a taxonomy of AI models along with the cutting edge approaches. Finally, we highlight challenges and open issues, followed by the future research directions pertaining to this exciting and fast-moving field.

Types and Applications of Nicking Enzyme-Combined Isothermal Amplification

Due to the sudden outbreak of COVID-19 at the end of 2019, rapid detection has become an urgent need for community clinics and hospitals. The rapid development of isothermal amplification detection technology for nucleic acids in the field of molecular diagnostic point-of-care testing (POCT) has gained a great deal of attention in recent years. Thanks to intensive research on nicking enzymes, nicking enzyme-combined isothermal amplification has become a promising platform for rapid detection. This is a novel technique that uses nicking enzymes to improve ordinary isothermal amplification. It has garnered significant interest as it overcomes the complexity of traditional molecular diagnostics and is not subject to temperature limitations, relying on cleavage enzymes to efficiently amplify targets in a very short time to provide a high level of amplification efficiency. In recent years, several types of nicking enzyme-combined isothermal amplification have been developed and they have shown great potential in molecular diagnosis, immunodiagnosis, biochemical identification, and other fields. However, this kind of amplification has some disadvantages. In this review, the principles, advantages and disadvantages, and applications of several nicking enzyme-combined isothermal amplification techniques are reviewed and the prospects for the development of these techniques are also considered.

Discrimination of Single-Nucleotide Variants Based on an Allele-Specific Hybridization Chain Reaction and Smartphone Detection

Massive DNA testing requires novel technologies to support a sustainable health system. In recent years, DNA superstructures have emerged as alternative probes and transducers. We, herein, report a multiplexed and highly sensitive approach based on an allele-specific hybridization chain reaction (AS-HCR) in the array format to detect single-nucleotide variants. Fast isothermal amplification was developed before activating the HCR process on a chip to work with genomic DNA. The assay principle was demonstrated, and the variables for integrating the AS-HCR process and smartphone-based detection were also studied. The results were compared to a conventional polymerase reaction chain (PCR)-based test. The developed multiplex method enabled higher selectivity against single-base mismatch sequences at concentrations as low as 10³ copies with a limit of detection of 0.7% of the mutant DNA percentage and good reproducibility (relative error: 5% for intra-assay and 17% for interassay). As proof of concept, the AS-HCR method was applied to clinical samples, including human cell cultures and biopsied tissues of cancer patients. Accurate identification of single-nucleotide mutations in KRAS and NRAS genes was validated, considering those obtained from the reference sequencing method. To conclude, AS-HCR is a rapid, simple, accurate, and cost-effective isothermal method that detects clinically relevant genetic variants and has a high potential for point-of-care demands.

Advances in the Rapid Diagnostic of Viral Respiratory Tract Infections

Viral infections are a significant public health problem, primarily due to their high transmission rate, various pathological manifestations, ranging from mild to severe symptoms and subclinical onset. Laboratory diagnostic tests for infectious diseases, with a short enough turnaround time, are promising tools to improve patient care, antiviral therapeutic decisions, and infection prevention. Numerous microbiological molecular and serological diagnostic testing devices have been developed and authorised as benchtop systems, and only a few as rapid miniaturised, fully automated, portable digital platforms. Their successful implementation in virology relies on their performance and impact on patient management. This review describes the current progress and perspectives in developing micro- and nanotechnology-based solutions for rapidly detecting human viral respiratory infectious diseases. It provides a nonexhaustive overview of currently commercially available and under-study diagnostic testing methods and discusses the sampling and viral genetic trends as preanalytical components influencing the results. We describe the clinical performance of tests, focusing on alternatives such as microfluidics-, biosensors-, Internet-of-Things (IoT)-based devices for rapid and accurate viral loads and immunological responses detection. The conclusions highlight the potential impact of the newly developed devices on laboratory diagnostic and clinical outcomes.

Ready-to-Use Vertical Flow Paper Device for Instrument-Free Room Temperature Reverse Transcription

Paper-based nucleic acid detection and diagnosis are currently gaining much interest in point-of-care (POC) applications. The major steps involved in any nucleic acid amplification testing (NAAT) based diagnostics are nucleic acid isolation, reverse transcription (RT) (in the case of RNA), amplification and detection. RT is an important step in quantifying the viral load in case of disease diagnosis as well as quantifying gene expression levels in other molecular studies. cDNA synthesis is routinely carried out using a thermal cycler, with the process requiring temperatures between 40ºC to 65ºC. Here we report for the first time an instrument-free RT, performed at room temperature on cellulose-based paper devices. cDNA synthesis on paper was confirmed by RT-PCR and Sanger sequencing of the PCR products. Purified RNA from varied sources such as cell lysate, tissue and blood were used to test the methodology. Synthetic hepatitis C virus (HCV) RNA and human blood RNA were used as proof-of-concept to demonstrate the use of these devices in diagnostic applications. Further, ready-to-use paper-based reverse transcription (PRT) devices have been developed, wherein only the RNA sample is added onto the device and the cDNA can be eluted after 30minutes of incubation at room temperature. The devices were found to be stable for 30 days at -20ºC storage. The cellulose-based PRT devices are simple, time saving and user-friendly for a complete instrument-free cDNA synthesis at room temperature.

Bridging the gap between development of point-of-care nucleic acid testing and patient care for sexually transmitted infections

The incidence rates of sexually transmitted infections (STIs), including the four major curable STIs - chlamydia, gonorrhea, trichomoniasis and, syphilis - continue to increase globally, causing medical cost burden and morbidity especially in low and middle-income countries (LMIC). There have seen significant advances in diagnostic testing, but commercial antigen-based point-of-care tests (POCTs) are often insufficiently sensitive and specific, while near-point-of-care (POC) instruments that can perform sensitive and specific nucleic acid amplification tests (NAATs) are technically complex and expensive, especially for LMIC. Thus, there remains a critical need for NAAT-based STI POCTs that can improve diagnosis and curb the ongoing epidemic. Unfortunately, the development of such POCTs has been challenging due to the gap between researchers developing new technologies and healthcare providers using these technologies. This review aims to bridge this gap. We first present a short introduction of the four major STIs, followed by a discussion on the current landscape of commercial near-POC instruments for the detection of these STIs. We present relevant research toward addressing the gaps in developing NAAT-based STI POCT technologies and supplement this discussion with technologies for HIV and other infectious diseases, which may be adapted for STIs. Additionally, as case studies, we highlight the developmental trajectory of two different POCT technologies, including one approved by the United States Food and Drug Administration (FDA). Finally, we offer our perspectives on future development of NAAT-based STI POCT technologies.

SERS substrate fabrication for biochemical sensing: towards point-of-care diagnostics

Rapid technology development and economic growth have brought attention to public health issues, such as food safety and environmental pollution, which creates an ever-increasing demand for fast and portable sensing technologies. Portable surface-enhanced Raman spectroscopy (SERS) capable of various analyte detection with low concentration in a convenient manner shows advantages in sensing technology including enhanced diagnostic precision, improved diagnostic efficiency, reduced diagnostic cost, and alleviation of patient pain, which emerges as a promising candidate for point-of-care testing (POCT). SERS detection technology based on different nanostructures made of noble metal-based nanomaterials can increase the sensitivity of Raman scattering by 6-8 orders of magnitude, making Raman based trace detection possible, and greatly promote the application scenarios of portable Raman spectrometers. In this perspective, we provide an overview of fundamental knowledge about the SERS mechanism including chemical and electromagnetic field enhancement mechanisms, the design and fabrication of SERS substrates based on materials, progress of using SERS for POCT in biochemical sensing and its clinical applications. Furthermore, we present the prospective of developing new nanomaterials with different functionalities for advanced SERS substrates, as well as the future advancement of biomedical sensing and clinical potential of SERS technology.

Sample Preparation and Diagnostic Methods for a Variety of Settings: A Comprehensive Review

Sample preparation is an essential step for nearly every type of biochemical analysis in use today. Among the most important of these analyses is the diagnosis of diseases, since their treatment may rely greatly on time and, in the case of infectious diseases, containing their spread within a population to prevent outbreaks. To address this, many different methods have been developed for use in the wide variety of settings for which they are needed. In this work, we have reviewed the literature and report on a broad range of methods that have been developed in recent years and their applications to point-of-care (POC), high-throughput screening, and low-resource and traditional clinical settings for diagnosis, including some of those that were developed in response to the coronavirus disease 2019 (COVID-19) pandemic. In addition to covering alternative approaches and improvements to traditional sample preparation techniques such as extractions and separations, techniques that have been developed with focuses on integration with smart devices, laboratory automation, and biosensors are also discussed.

Point-of-care diagnostics for infectious diseases: From methods to devices

The current widespread of COVID-19 all over the world, which is caused by SARS-CoV-2 virus, has again emphasized the importance of development of point-of-care (POC) diagnostics for timely prevention and control of the pandemic. Compared with labor- and time-consuming traditional diagnostic methods, POC diagnostics exhibit several advantages such as faster diagnostic speed, better sensitivity and specificity, lower cost, higher efficiency and ability of on-site detection. To achieve POC diagnostics, developing POC detection methods and correlated POC devices is the key and should be given top priority. The fast development of microfluidics, micro electro-mechanical systems (MEMS) technology, nanotechnology and materials science, have benefited the production of a series of portable, miniaturized, low cost and highly integrated POC devices for POC diagnostics of various infectious diseases. In this review, various POC detection methods for the diagnosis of infectious diseases, including electrochemical biosensors, fluorescence biosensors, surface-enhanced Raman scattering (SERS)-based biosensors, colorimetric biosensors, chemiluminiscence biosensors, surface plasmon resonance (SPR)-based biosensors, and magnetic biosensors, were first summarized. Then, recent progresses in the development of POC devices including lab-on-a-chip (LOC) devices, lab-on-a-disc (LOAD) devices, microfluidic paper-based analytical devices (μPADs), lateral flow devices, miniaturized PCR devices, and isothermal nucleic acid amplification (INAA) devices, were systematically discussed. Finally, the challenges and future perspectives for the design and development of POC detection methods and correlated devices were presented. The ultimate goal of this review is to provide new insights and directions for the future development of POC diagnostics for the management of infectious diseases and contribute to the prevention and control of infectious pandemics like COVID-19.

Nanoporous hydrogel for direct digital nucleic acid amplification in untreated complex matrices for single bacteria counting

Direct quantification of pathogens in unprocessed complex samples remain challenging due to the severe inhibition of nucleic acid amplification. In this work, we report a nanoporous polyethylene glycol hydrogel with self-cleaning capacity for direct amplification of nucleic acid in complex matrices (human whole blood, animal blood, milky tea, humic acid, and surfactants) without any sample pretreatment or DNA extraction. During isothermal amplification inside the hydrogel, the inhibitors in the assay will be adsorbed and removed by the surrounding nanostructured polymers, and nucleic acid amplification was proceeding successfully, resulting in a series of bright dots for single bacteria counting. Thus, the loop-mediated isothermal amplifications (LAMP) performed inside hydrogel demonstrated a high level of resistance to inhibition in various complex matrices. The underlying anti-inhibition mechanism was also investigated. Digital quantification of Escherichia coli, Salmonella typhi and Listeria monocytogenes in whole blood were achieved within 20 min, with wide dynamic range, high specificity and low detection limit down to single bacterium. Visual counting via naked eye was also successfully established with the help of a conventional LED flashlight. We believe the developed hydrogel nanofluidic system has an enormous potential for on-site direct analysis of complex, crude, and unprocessed samples in clinical, food, agricultural, and environmental fields.

Identification of Novel Sensitive and Reliable Serovar-Specific Targets for PCR Detection of Salmonella Serovars Hadar and Albany by Pan-Genome Analysis

The accurate and rapid classification of Salmonella serovars is an essential focus for the identification of isolates involved in disease in humans and animals. The purpose of current research was to identify novel sensitive and reliable serovar-specific targets and to develop PCR method for Salmonella C2 serogroups (O:8 epitopes) in food samples to facilitate timely treatment. A total of 575 genomic sequences of 16 target serovars belonging to serogroup C2 and 150 genomic sequences of non-target serovars were analysed by pan-genome analysis. As a result, four and three specific genes were found for serovars Albany and Hadar, respectively. Primer sets for PCR targeting these serovar-specific genes were designed and evaluated based on their specificity; the results showed high specificity (100%). The sensitivity of the specific PCR was 2.8 × 10¹–10³ CFU/mL and 2.3 × 10³–10⁴ CFU/mL for serovars Albany and Hadar, respectively, and the detection limits were 1.04 × 10³–10⁴ CFU/g and 1.16 × 10⁴–10⁵ CFU/g in artificially contaminated raw pork samples. Furthermore, the potential functions of these serovar-specific genes were analysed; all of the genes were functionally unknown, except for one specific serovar Albany gene known to be a encoded secreted protein and one specific gene for serovars Hadar and Albany that is a encoded membrane protein. Thus, these findings demonstrate that pan-genome analysis is a precious method for mining new high-quality serovar-targets for PCR assays or other molecular methods that are highly sensitive and can be used for rapid detection of Salmonella serovars.

Barcode signal amplifying strategy for sensitive and accurate protein detection on LC-MS/MS

Protein drugs showing strong pharmaceutical activity, high specificity, and low toxicity and side effects have drawn extensive attention in the field of life sciences and medicine. Precise evaluation of the function of these drugs requires accurate and sensitive detection methods. Here, we report a novel chromatography-tandem mass spectrometry (LC-MS/MS) method for sensitive and selective detection of protein drugs. Magnetic nanoparticles (Apt29@MNPs) were functionalized by thrombin aptamers, and quantum dots (Apt15@ss@QDs) were dual-functionalized with quantitative thrombin aptamers and small molecules with high ionization efficiency as the mass barcode. After Apt29@MNPs specifically purify and enrich thrombin from biological samples, they can form a nano "sandwich structure" when Apt15@ss@QDs are added, resulting in the release of the mass barcode for LC-MS/MS analysis via the cutting of the disulfide bond. Since there is a higher quantitative molecular ratio of mass barcode to thrombin in the nano-"sandwich structure", quantitative detection of thrombin with high sensitivity and selectivity can be achieved via the LC-MS/MS detection of the mass barcode with high ionization efficiency rather than thrombin, which effectively avoids the disadvantages of direct protein detection by mass spectrometry. The established method for thrombin detection shows a good linear relationship in a concentration range of 0.00115-1.15 nM with a limit of detection (LOD) of 0.0007 nM. The present work provides a new approach for the effective and sensitive quantitative analysis of protein drugs and would be of great significance in promoting the development of protein drugs and clinical applications.

Rapid Methods for Antimicrobial Resistance Diagnostics

Antimicrobial resistance (AMR) is one of the most challenging threats in public health; thus, there is a growing demand for methods and technologies that enable rapid antimicrobial susceptibility testing (AST). The conventional methods and technologies addressing AMR diagnostics and AST employed in clinical microbiology are tedious, with high turnaround times (TAT), and are usually expensive. As a result, empirical antimicrobial therapies are prescribed leading to AMR spread, which in turn causes higher mortality rates and increased healthcare costs. This review describes the developments in current cutting-edge methods and technologies, organized by key enabling research domains, towards fighting the looming AMR menace by employing recent advances in AMR diagnostic tools. First, we summarize the conventional methods addressing AMR detection, surveillance, and AST. Thereafter, we examine more recent non-conventional methods and the advancements in each field, including whole genome sequencing (WGS), matrix-assisted laser desorption/ionization time-of-flight (MALDI-TOF) spectrometry, Fourier transform infrared (FTIR) spectroscopy, and microfluidics technology. Following, we provide examples of commercially available diagnostic platforms for AST. Finally, perspectives on the implementation of emerging concepts towards developing paradigm-changing technologies and methodologies for AMR diagnostics are discussed.

Ligation-Enabled Fluorescence-Coding PCR for High-Dimensional Fluorescence-Based Nucleic Acid Detection

Polymerase chain reaction (PCR) is by far the most commonly used method of nucleic acid amplification and has likewise been employed for a plethora of diagnostic purposes. Nonetheless, multiplexed PCR-based detection schemes have hitherto been largely limited by technical challenges associated with nonspecific interactions and other limitations inherent to traditional fluorescence-based assays. Here, we describe a novel strategy for multiplexed PCR-based analysis called Ligation-eNabled fluorescence-Coding PCR (LiNC PCR) that exponentially enhances the multiplexing capability of standard fluorescence-based PCR assays. The technique relies upon a simple, preliminary ligation reaction in which target DNA sequences are converted to PCR template molecules with distinct endpoint fluorescence signatures. Universal TaqMan probes are used to create target-specific multicolor fluorescence signals that can be readily decoded to identify amplified targets of interest. We demonstrate the LiNC PCR technique by implementing a two-color-based assay for detection of 10 ovarian cancer epigenetic biomarkers at analytical sensitivities as low as 60 template molecules with no detectable target cross-talk. Overall, LiNC PCR provides a simple and inexpensive method for achieving high-dimensional multiplexing that can be implemented in manifold molecular diagnostic applications.

Microfluidic Point-of-Care Testing: Commercial Landscape and Future Directions

Point-of-care testing (POCT) allows physicians to detect and diagnose diseases at or near the patient site, faster than conventional lab-based testing. The importance of POCT is considerably amplified in the trying times of the COVID-19 pandemic. Numerous point-of-care tests and diagnostic devices are available in the market including, but not limited to, glucose monitoring, pregnancy and infertility testing, infectious disease testing, cholesterol testing and cardiac markers. Integrating microfluidics in POCT allows fluid manipulation and detection in a singular device with minimal sample requirements. This review presents an overview of two technologies - (a.) Lateral Flow Assay (LFA) and (b.) Nucleic Acid Amplification - upon which a large chunk of microfluidic POCT diagnostics is based, some of their applications, and commercially available products. Apart from this, we also delve into other microfluidic-based diagnostics that currently dominate the in-vitro diagnostic (IVD) market, current testing landscape for COVID-19 and prospects of microfluidics in next generation diagnostics.

Carbon Nanomaterials for Biomedical Application

The use of carbon-based nanomaterials (CNs) with outstanding properties has been rising in many scientific and industrial application fields. These CNs represent a tunable alternative for applications with biomolecules, which allow interactions in either covalent or noncovalent way. Diverse carbon-derived nanomaterial family exhibits unique features and has been widely exploited in various biomedical applications, including biosensing, diagnosis, cancer therapy, drug delivery, and tissue engineering. In this chapter, we aim to present an overview of CNs with a particular interest in intrinsic structural, electronic, and chemical properties. In particular, the detailed properties and features of CNs and its derivatives, including carbon nanotube (CNT), graphene, graphene oxide (GO), and reduced GO (rGO) are summarized. The interesting biomedical applications are also reviewed in order to offer an overview of the possible fields for scientific and industrial applications of CNs.

Disposable silicon-based all-in-one micro-qPCR for rapid on-site detection of pathogens

Rapid screening and low-cost diagnosis play a crucial role in choosing the correct course of intervention when dealing with highly infectious pathogens. This is especially important if the disease-causing agent has no effective treatment, such as the novel coronavirus SARS-CoV-2, and shows no or similar symptoms to other common infections. Here, we report a disposable silicon-based integrated Point-of-Need transducer (TriSilix) for real-time quantitative detection of pathogen-specific sequences of nucleic acids. TriSilix can be produced at wafer-scale in a standard laboratory (37 chips of 10 × 10 × 0.65 mm in size can be produced in 7 h, costing ~0.35 USD per device). We are able to quantitatively detect a 563 bp fragment of genomic DNA of Mycobacterium avium subspecies paratuberculosis through real-time PCR with a limit-of-detection of 20 fg, equivalent to a single bacterium, at the 35th cycle. Using TriSilix, we also detect the cDNA from SARS-CoV-2 (1 pg) with high specificity against SARS-CoV (2003).

Detection of COVID-19: A review of the current literature and future perspectives

The rapid spread of severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) has led to the coronavirus disease 2019 (COVID-19) worldwide pandemic. This unprecedented situation has garnered worldwide attention. An effective strategy for controlling the COVID-19 pandemic is to develop highly accurate methods for the rapid identification and isolation of SARS-CoV-2 infected patients. Many companies and institutes are therefore striving to develop effective methods for the rapid detection of SARS-CoV-2 ribonucleic acid (RNA), antibodies, antigens, and the virus. In this review, we summarize the structure of the SARS-CoV-2 virus, its genome and gene expression characteristics, and the current progression of SARS-CoV-2 RNA, antibodies, antigens, and virus detection. Further, we discuss the reasons for the observed false-negative and false-positive RNA and antibody detection results in practical clinical applications. Finally, we provide a review of the biosensors which hold promising potential for point-of-care detection of COVID-19 patients. This review thereby provides general guidelines for both scientists in the biosensing research community and for those in the biosensor industry to develop a highly sensitive and accurate point-of-care COVID-19 detection system, which would be of enormous benefit for controlling the current COVID-19 pandemic.