Dual aptamer assay for detection of Acinetobacter baumannii on an electromagnetically-driven microfluidic platform

An efficient and universal In silico screening strategy for acquisition of high-affinity Aptamer and its application in analytical utility

Numerous aptamers against various targets have been identified through the technology of systematic evolution of ligands by exponential enrichment (SELEX), but the affinity of these aptamers are often insufficient due to the limitations of SELEX. Therefore, a more rational in silico screening strategy (ISS) was developed for efficient screening of high affinity aptamers, which took shape complementarity and thermodynamic stability into consideration. Neuron specific enolase (NSE), a tumor marker, was selected as the target molecule. In the screening process, three aptamer candidates with good shape complementarity, lower ΔG values, and higher ZDOCK scores were produced. The dissociation constant (Kd) of these candidates to NSE was determined to be 10.13 nM, 14.82 nM, and 2.76 nM, respectively. Each of them exhibited higher affinity to NSE than the parent aptamer (Kd = 23.83 nM). Finally, an antibody-free fluorescence aptasensor assay, based on the aptamer with the highest affinity, P-5C8G, was conducted, resulting in a limit of detection (LOD) value of 1.8 nM, which was much lower than the parental aptamer (P, LOD = 12.6 nM). The proposed ISS approach provided an efficient and universal strategy to improve the aptamer to have a high affinity and good analytical utility.

Aptamers: A Cutting-Edge Approach for Gram-Negative Bacterial Pathogen Identification

Early and accurate diagnoses of pathogenic microorganisms is essential to correctly identify diseases, treating infections, and tracking disease outbreaks associated with microbial infections, to develop precautionary measures that allow a fast and effective response in epidemics and pandemics, thus improving public health. Aptamers are a class of synthetic nucleic acid molecules with the potential to be used for medical purposes, since they can be directed towards any target molecule. Currently, the use of aptamers has increased because they are a useful tool in the detection of specific targets. We present a brief review of the use of aptamers to detect and identify bacteria or even some toxins with clinical importance. This work describes the advances in the technology of aptamers, with the purpose of providing knowledge to develop new aptamers for diagnoses and treatment of different diseases caused by infectious microorganisms.

Constructing DNAzyme-driven three-dimensional DNA nanomachine-mediated paper-based photoelectrochemical device for ultrasensitive detection of miR-486-5p

As a unique class of dynamic nanostructures, biomimetic DNA walking machines that exhibit geometrical complexity and nanometre precision have gained great success in photoelectrochemical (PEC) bioanalysis. Despite certain achievements, the slow reaction kinetics and low processivity severely restrict the amplification efficiency of the DNA walker-mediated biosensors. Herein, by taking advantage of efficient DNA rolling machines, a three-dimensional (3D) DNA nanomachine-mediated paper-based PEC device for speedy ultrasensitive detection of miR-486-5p was successfully constructed. To achieve it, a novel In2S3/SnS2 sensitized heterojunction was firstly in-situ grown on the Au-modified paper fibers and implemented as the photoanode with effective separation of photogenerated carriers to achieve an enhanced initial photocurrent. Subsequently, the copper hexacyanoferrate(II)-modified CuO nanosphere was introduced as a multifunctional signal regulator via the competitive capture of electron donors and photon energy with the photoelectric layer for efficiently quenching the PEC signal. With the introduction of targets, the DNAzyme-driven DNA nanomachine with editable motion modes was gradually activated and it could continuously cleave the tracks DNA labeled quenching probes, finally achieving the recovery of PEC signal. As a proof of concept, the elaborated paper-based PEC device presented a wide linear range from 0.1 fM to 100 pM and a detection limit of 35 aM for miR-486-5p bioassay. This work provides an innovative insight to the exploitation of DNA nanobiotechnology and nucleic acid signal amplification strategy.

A paper-based aptamer-sandwich assay for detection of HNP 1 as a biomarker for periprosthetic joint infections on an integrated microfluidic platform

BACKGROUND

Total joint arthroplasty (TJA) has significantly improved the quality of life for millions suffering from end-stage arthritis. However, periprosthetic joint infections (PJI) remain a serious complication, necessitating extensive interventions and prolonged antimicrobial treatments. The aging population is expected to lead to a rise in TJA cases, subsequently increasing the incidence of PJI, particularly in the elderly who face higher mortality rates. Current diagnostic methods for suspected PJI, such as radiographs and biochemical markers like CRP and ESR, exhibit limited sensitivity. Therefore, there is a critical need for a specific synovial fluid biomarker assay to enhance PJI diagnosis using specific SF-based assay.

RESULTS

This study introduces a novel microfluidic chip with a paper-based aptamer-sandwich assay for the quantitative detection of HNP 1, a crucial PJI biomarker, in synovial fluid. The assay leverages the advantages of aptamers over antibodies, demonstrating high selectivity and affinity for target molecules. The integration of a nitrocellulose (NC) membrane onto the microfluidic platform represents a significant advancement, reducing background signals and simplifying the assay procedure without intricate procedure and pre-treatment. The NC membrane-based microfluidic device offers rapid, cost-effective, and highly sensitive detection of HNP 1, with a limit of detection of 0.5 mg L-1. The microfluidic device demonstrates exceptional performance, detecting up to four clinical samples in approximately 42 min on a single chip with 100 % accuracy, as confirmed by analysis of 12 clinical samples and comparison with "gold-standard". Moreover, the assay exhibits a wide dynamic range of 0.5-100 mg L-1, underscoring its potential as a powerful tool for PJI diagnosis in clinical settings.

SIGNIFICANCE

This work introduces a paper-based microfluidic system tailored for rapid HNP 1 detection using synovial fluid near joint region (and not serum via blood) for better diagnosis. The innovative paper-based aptamer-sandwich assay yields results within 42-min. Significantly, it boasts a wide dynamic range, detecting levels from an impressive 0.5 mg L-1, crucial in the 2.6 mg L-1 threshold region. This heightened sensitivity and expansive detection capability establish our assay as a leader in PJI diagnostics, promising unmatched precision and efficiency in clinical applications.

Isothermal Amplification and Hypersensitive Fluorescence Dual-Enhancement Nucleic Acid Lateral Flow Assay for Rapid Detection of Acinetobacter baumannii and Its Drug Resistance

Acinetobacter baumannii (A. baumannii) is among the main pathogens that cause nosocomial infections. The ability to rapidly and accurately detect A. baumannii and its drug resistance is essential for blocking secondary infections and guiding treatments. In this study, we reported a nucleic acid fluorescent lateral flow assay (NFLFA) to identify A. baumannii and carbapenem-resistant A. baumannii (CRAB) in a rapid and quantitative manner by integrating loop-mediated isothermal amplification (LAMP) and silica-based multilayered quantum dot nanobead tag (Si@MQB). First, a rapid LAMP system was established and optimised to support the effective amplification of two bacterial genes in 35 min. Then, the antibody-modified Si@MQB was introduced to capture the two kinds of amplified DNA sequences and simultaneously detect them on two test lines of a LFA strip, which greatly improved the detection sensitivity and stability of the commonly used AuNP-based nucleic acid LFA. With these strategies, the established LAMP-NFLFA achieved detection limits of 199 CFU/mL and 287 CFU/mL for the RecA (house-keeping gene) and blaOXA-23 (drug resistance gene) genes, respectively, within 43 min. Furthermore, the assay exhibited good repeatability and specificity for detecting target pathogens in real complex specimens and environments; thus, the proposed assay undoubtedly provides a promising and low-cost tool for the on-site monitoring of nosocomial infections.

Development of a label-free impedimetric aptasensor for the detection of Acinetobacter baumannii bacteria

Acinetobacter baumannii (A. baumannii) is responsible for various nosocomial infections, which is known as a clinically crucial opportunistic pathogen. Therefore, rapid detection of this pathogen is critical to prevent the spread of infection and appropriate treatment. Biological detection probes, such as aptamers and synthetic receptors can be used as diagnostic layers to detect bacteria. In this work, an electrochemical aptasensor was developed for the ultrasensitive detection of A. baumannii by electrochemical impedance spectroscopy (EIS). The aptamer was immobilized on the surface of a CSPE modified with the nanocomposite Fe3O4@SiO2@Glyoxal (Gly) for selective and label-free detection of A. baumannii. The charge transfers resistance (Rct) between redox couple [Fe(CN)63-/4-] and the surface of aptasensor in the Nyquist plot of EIS study was used as electroanalytical signal for detection and determination of A. baumannii. The obtained results showed that the constructed aptasensor could specifically detect A. baumannii in the concentration range from 1.0 × 103-1.0 × 108 Colony-forming unit (CFU)/mL and with a detection limit of 150 CFU/mL (S/N = 3). In addition to its sensitivity, the biosensor exhibits high selectivity over some other pathogens. Therefore, a simple, inexpensive, rapid, label-free, selective, and sensitive electrochemical aptasensor was developed to detect A. baumannii.

Highly-specific aptamer targeting SARS-CoV-2 S1 protein screened on an automatic integrated microfluidic system for COVID-19 diagnosis

Variants of the severe acute respiratory syndrome coronavirus (SARS-CoV-2) have evolved such that it may be challenging for diagnosis and clinical treatment of the pandemic coronavirus disease-19 (COVID-19). Compared with developed SARS-CoV-2 diagnostic tools recently, aptamers may exhibit some advantages, including high specificity/affinity, longer shelf life (vs. antibodies), and could be easily prepared. Herein an integrated microfluidic system was developed to automatically carry out one novel screening process based on the systematic evolution of ligands by exponential enrichment (SELEX) for screening aptamers specific with SARS-CoV-2. The new screening process started with five rounds of positive selection (with the S1 protein of SARS-CoV-2). In addition, including non-target viruses (influenza A and B), human respiratory tract-related cancer cells (adenocarcinoma human alveolar basal epithelial cells and dysplastic oral keratinocytes), and upper respiratory tract-related infectious bacteria (including methicillin-resistant Staphylococcus aureus, Pseudomonas aeruginosa, Acinetobacter baumannii, and Klebsiella pneumoniae), and human saliva were involved to increase the specificity of the screened aptamer during the negative selection. Totally, all 10 rounds could be completed within 20 h. The dissociation constant of the selected aptamer was determined to be 63.0 nM with S1 protein. Limits of detection for Wuhan and Omicron clinical strains were found to be satisfactory for clinical applications (i.e. 4.80 × 10¹ and 1.95 × 10² copies/mL, respectively). Moreover, the developed aptamer was verified to be capable of capturing inactivated SARS-CoV-2 viruses, eight SARS-CoV-2 pseudo-viruses, and clinical isolates of SARS-CoV-2 viruses. For high-variable emerging viruses, this developed integrated microfluidic system can be used to rapidly select highly-specific aptamers based on the novel SELEX methods to deal with infectious diseases in the future.

A Microfluidic Dual-Aptamer Sandwich Assay for Rapid and Cost-Effective Detection of Recombinant Proteins

While monitoring expression of recombinant proteins is essential for obtaining high-quality biopharmaceutical and biotechnological products, existing assays for recombinant protein detection are laborious, time-consuming and expensive. This paper presents a microfluidic approach to rapid and cost-effective detection of tag-fused recombinant proteins via a dual-aptamer sandwich assay. Our approach addresses limitations in current methods for both dual-aptamer assays and generation of aptamers for such assays by first using microfluidic technology to isolate the aptamers rapidly and then employing these aptamers to implement a microfluidic dual-aptamer assay for tag-fused recombinant protein detection. The use of microfluidic technology enables the fast generation of aptamers and rapid detection of recombinant proteins with minimized consumption of reagents. In addition, compared with antibodies, aptamers as low-cost affinity reagents with an ability of reversible denaturation further decreases the cost of recombinant protein detection. For demonstration, an aptamer pair is isolated rapidly toward His-tagged IgE within two days, and then used in the microfluidic dual-aptamer assay for detecting His-tagged IgE in cell culture media within 10 min and with a limit of detection of 7.1 nM.

Magnetite-Based Biosensors and Molecular Logic Gates: From Magnetite Synthesis to Application

In the last few decades, point-of-care (POC) sensors have become increasingly important in the detection of various targets for the early diagnostics and treatment of diseases. Diverse nanomaterials are used as building blocks for the development of smart biosensors and magnetite nanoparticles (MNPs) are among them. The intrinsic properties of MNPs, such as their large surface area, chemical stability, ease of functionalization, high saturation magnetization, and more, mean they have great potential for use in biosensors. Moreover, the unique characteristics of MNPs, such as their response to external magnetic fields, allow them to be easily manipulated (concentrated and redispersed) in fluidic media. As they are functionalized with biomolecules, MNPs bear high sensitivity and selectivity towards the detection of target biomolecules, which means they are advantageous in biosensor development and lead to a more sensitive, rapid, and accurate identification and quantification of target analytes. Due to the abovementioned properties of functionalized MNPs and their unique magnetic characteristics, they could be employed in the creation of new POC devices, molecular logic gates, and new biomolecular-based biocomputing interfaces, which would build on new ideas and principles. The current review outlines the synthesis, surface coverage, and functionalization of MNPs, as well as recent advancements in magnetite-based biosensors for POC diagnostics and some perspectives in molecular logic, and it also contains some of our own results regarding the topic, which include synthetic MNPs, their application for sample preparation, and the design of fluorescent-based molecular logic gates.

An aptamer-based sandwich assay for detection of alpha-defensin human neutrophil protein 1 on a microfluidic platform

The diagnosis of periprosthetic joint infection (PJI) remains a labor-intensive and challenging issue, with life-threatening complications associated with misdiagnoses. Superior diagnostic approaches are therefore urgently needed, and synovial biomarkers are gaining substantial attention in this capacity. A new aptamer-based sandwich assay was developed where the aptamer probes specific to one such biomarker, alpha-defensin human neutrophil protein 1 (HNP 1), was integrated herein into a new microfluidic platform. The magnetic beads coated with the primary aptamer probe were able to bind the target protein with high affinity and high specificity in synovial fluid and a fluorescent-labelled secondary aptamer were further used to quantify HNP 1 in a sandwich approach. Up to four clinical samples with low volume (∼50 μL each) in a much faster assay including detection within <60 min with 100% accuracy (with totally 13 clinical samples without the need of sample pretreatment) through the use of the aptamer-based sandwich assay were automatically detected on a single chip. The wide dynamic range of this compact device, 0.5-100 mg/L, highlights its utility for future PJI diagnostics in the clinic.

Aptamers: A prospective tool for infectious diseases diagnosis

It is well known that people's health is seriously threatened by various pathogens (such as Mycobacterium tuberculosis, Treponema pallidum, Novel coronavirus, HIV, Mucor, etc.), which leads to heavy socioeconomic burdens. Therefore, early and accurate pathogen diagnosis is essential for timely and effective therapies. Up to now, diagnosing human contagious diseases at molecule and nano levels is remarkably difficult owing to insufficient valid probes when it comes to determining the biological markers of pathogens. Aptamers are a set of high‐specificity and high‐sensitivity plastic oligonucleotides screened in vitro via the selective expansion of ligands by exponential enrichment (SELEX). With the advent of aptamer‐based technologies, their merits have aroused mounting academic interest. In recent years, as new detection and treatment tools, nucleic acid aptamers have been extensively utilized in the field of biomedicine, such as pathogen detection, new drug development, clinical diagnosis, nanotechnology, etc. However, the traditional SELEX method is cumbersome and has a long screening cycle, and it takes several months to screen out aptamers with high specificity. With the persistent development of SELEX‐based aptamer screening technologies, the application scenarios of aptamers have become more and more extensive. The present research briefly reviews the research progress of nucleic acid aptamers in the field of biomedicine, especially in the diagnosis of contagious diseases.

Electromagnetically-driven integrated microfluidic platform using reverse transcription loop-mediated isothermal amplification for detection of severe acute respiratory syndrome coronavirus 2

Rapid, sensitive and accurate diagnosis of severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) is of great need for effective quarantining and treatment. Real-time reverse-transcription polymerase chain reaction requiring thermocyling has been commonly used for diagnosis of SARS-CoV-2 though it may take two to 4 h before lengthy sample pretreatment process and require bulky apparatus and well-trained personnel. Since multiple reverse transcription loop-mediated isothermal amplification (multiple RT-LAMP) process without thermocycling is sensitive, specific and fast, an electromagnetically-driven microfluidic chip (EMC) was developed herein to lyse SARS-CoV-2 viruses, extract their RNAs, and perform qualitative analysis of three marker genes by on-chip multiple RT-LAMP in an automatic format within 82 min at a limit of detection of only ∼5000 copies per reaction (i.e. 200 virus/ μL). This compact EMC may be especially promising for SARS-CoV-2 diagnostics in resource-limited countries.

Microchip coupled with MALDI-TOF MS for the investigation of bacterial contamination of fish muscle products

Bacterial contamination is a significant concern in food safety. Traditional methods, though being a gold standard for bacterial detection, are time-consuming. In this work, we managed to establish a simple and versatile magnetic-assisted microfluidic method for rapid bacterial detection of fish muscle products, by manipulating anti-human IgG functionalized magnetic beads in a zig-zag shaped microfluidic channel, increasing the probability for bacteria capture. The captured bacteria were characterized by matrix-assisted laser desorption ionization time-of-flight mass spectrometry (MALDI-TOF MS). This method is capable of isolating Escherichia coli, Staphylococcus aureus and Klebsiella pneumoniae from 5 μL of sablefish sarcoplasmic protein sample, and detecting Escherichia coli in the range of 6.0 to 6.0×10⁴ CFU/mL with a detection limit of 6 CFU/mL. Bacterial growth on salmon sashimi during its period of storage was successfully monitored. The current protocol holds great potential for pathogen detection and microbial control in the food industry.

Selection and Identification of a DNA Aptamer for Multidrug-Resistant Acinetobacter baumannii Using an In-House Cell-SELEX Methodology

Infections caused by multidrug-resistant A. baumannii are a worldwide health concern with high mortality rates. Rapid identification of this infectious agent is critical as it can easily spread with difficult or no options for treatment. In this context, the development of reliable and economically viable detection and therapeutic methodologies are still challenging. One of the promising solutions is the development of nucleic acid aptamers capable of interacting with bacteria. These aptamers can be used for specific recognition of infectious agents as well as for blocking their functions. Cell-SELEX technology currently allows the selection and identification of aptamers and is flexible enough to target molecules present in an entire bacterial cell without their prior knowledge. However, the aptamer technology is still facing many challenges, such as the complexity of the screening process. Here, we describe the selection and identification of a new aptamer A01, using an in-house whole-cell SELEX-based methodology, against multi-resistant Acinetobacter baumannii, with rapid execution and low cost. In addition, this protocol allowed the identification of the aptamer A01 with the whole A. baumannii cell as a target. The aptamer A01 demonstrated a binding preference to A. baumannii when compared to K. pneumoniae, C. albicans, and S. aureus in fluorescence assays. Although the time-kill assay did not show an effect on bacterial growth, the potential bactericidal or bacteriostatic cannot be totally discarded. The new categorized aptamer (A01) displayed a significant binding affinity to MDR A. baumannii.

Engineering Phage Tail Fiber Protein as a Wide-Spectrum Probe for Acinetobacter baumannii Strains with a Recognition Rate of 100

As a multidrug-resistant pathogen, Acinetobacter baumannii has long been identified as one of the most common nosocomial bacteria. High-performance recognition probes for wide-spectrum detection of A. baumannii are highly desired to achieve efficient diagnosis and timely treatment of infectious diseases induced by this pathogen. An engineering tail fiber protein (ETFP) named as Gp50 encoded by lytic phage Abp9 was expressed in Escherichia coli and identified as a binding protein for A. baumannii. According to the results of genome sequencing of an A. baumannii wild strain and phage-resistant strains, the binding receptor of ETFP Gp50 is inferred to be a lipopolysaccharide distributed on the bacterial surface. The engineering protein did not show lytic activity to A. baumannii, which facilitates the development of reliable diagnosis kits and biosensors with high flexibility and low false-negative rate. The results of specificity study show that ETFP Gp50 is a species-specific binding protein with a recognition rate of 100% for all tested 77 A. baumannii strains, while that of the natural phage Abp9 is only 27.3%. With the engineering protein, a fluorescence method was developed to detect A. baumannii with a detection range of 2.0 × 10² to 2.0 × 10⁸ cfu mL^-1. The method has been used for the quantification of A. baumannii in a diverse sample matrix with acceptable reliability. The work demonstrates the application potential of ETFP Gp50 as an ideal recognition probe for rapid screening of A. baumannii strains in a complicated sample matrix.

Biomolecules capturing live bacteria from clinical samples

Rapid phenotypic antimicrobial susceptibility testing (AST) requires the enrichment of live bacteria from patient samples, which is particularly challenging in the context of life-threatening bloodstream infections (BSIs) due to low bacterial titers. Over two decades, an extensive array of pathogen-specific biomolecules has been identified to capture live bacteria. The prevailing biomolecules are immune proteins of the complement system, antibodies, aptamers, phage proteins, and antimicrobial peptides. These biomolecules differ by their binder generation technologies and exhibit highly variable specificities, ranging from bacterial strains to most pathogenic bacteria. Here, we summarize how these diverse biomolecules were identified, list examples of successfully reported capture assays, and provide an outlook on the use of nanobodies raised against conserved surface-accessible proteins as promising biomolecules for pathogen capture.

An ultra-sensitive dual-responsive aptasensor with combination of liquid crystal and intercalating dye molecules: A food toxin case study

Herein, a label-free aptasensor was designed through forming a double-stranded DNA skeleton on the glass substrate for ultrasensitive quantification of ochratoxin A (OTA) as a case study. The function fundament of the dual-responsive aptasensor was the perturbation of the vertical alignment of the liquid crystals (LCs) and intercalation of the SYBR Green I (SGI) dye molecules between the base pairs of the double-stranded DNA structure. The presence of OTA decomposed the double-stranded structure of DNA by releasing the OTA-specific aptamer from the sensing platform that induced an apparent alteration of the optical and fluorescent responses. The aptasensor specifically detected the ultra-low levels of OTA as 47.0E-9 pM (0.047 aM) and 34.0E-3 pM (34 fM) based on the polarized and fluorescent responses, respectively. The aptasensor monitored OTA in the coffee and grape drink samples. The aptasensor provides promising insight for manufacturing real-time, cost-effective, and portable sensing devices for food control usage.

Aptasensors for the detection of infectious pathogens: design strategies and point-of-care testing

The epidemic of infectious diseases caused by contagious pathogens is a life-threatening hazard to the entire human population worldwide. A timely and accurate diagnosis is the critical link in the fight against infectious diseases. Aptamer-based biosensors, the so-called aptasensors, employ nucleic acid aptamers as bio-receptors for the recognition of target pathogens of interest. This review focuses on the design strategies as well as state-of-the-art technologies of aptasensor-based diagnostics for infectious pathogens (mainly bacteria and viruses), covering the utilization of three major signal transducers, the employment of aptamers as recognition moieties, the construction of versatile biosensing platforms (mostly micro and nanomaterial-based), innovated reporting mechanisms, and signal enhancement approaches. Advanced point-of-care testing (POCT) for infectious disease diagnostics are also discussed highlighting some representative ready-to-use devices to address the urgent needs of currently prevalent coronavirus disease 2019 (COVID-19). Pressing issues in aptamer-based technology and some future perspectives of aptasensors are provided for the implementation of aptasensor-based diagnostics into practical application.

Construction and bioapplications of aptamer-based dual recognition strategy

Aptamer-based dual recognition strategy, using dual aptamers or the cooperation of aptamers with other recognition elements, can better utilize the advantages of each recognition molecule and increase the design flexibility to effectively overcome the limitations of a single molecule recognition strategy, thereby improving the sensitivity and selectivity and facilitating the regulation of biological process. Hence, this review systematically tracks the construction and application of dual aptamers recognition strategy in the versatile detection of protein biomarkers, pathogenic microorganisms, cancer cells, and the treatment of some diseases and, more importantly, in functional regulation and imaging of cell-surface protein receptors. Then, the cooperation of aptamers with other recognition elements are briefly introduced. Potential challenges facing this field have been highlighted, aiming to expand bioanalytical applications of aptamer-based dual or multiple recognition strategies and meet the growing demand for precision medicine.

Aptamer Conjugated Indium Phosphide Quantum Dots with a Zinc Sulphide Shell as Photoluminescent Labels for Acinetobacter baumannii

Acinetobacter baumannii is a remarkable microorganism known for its diversity of habitat and its multi-drug resistance, resulting in hard-to-treat infections. Thus, a sensitive method for the identification and detection of Acinetobacter baumannii is vital. However, current methods used for the detection of pathogens have not improved in the past decades and suffer from long process times and low detection limits. A cheap, quick, and easy detection mechanism is needed. In this work, we successfully prepared indium phosphide quantum dots with a zinc sulphide shell, conjugated to a targeting aptamer ligand, to specifically label Acinetobacter baumannii. The system retained both the photophysical properties of the quantum dots and the folded structure and molecular recognition function of the aptamer, therefore successfully targeting Acinetobacter baumannii. Confocal microscopy and transmission electron microscopy showed the fluorescent quantum dots surrounding the Acinetobacter baumannii cells confirming the specificity of the aptamer conjugated to indium phosphide quantum dots with a zinc sulphide shell. Controls were undertaken with a different bacteria species, showing no binding of the aptamer conjugated quantum dots. Our strategy offers a novel method to detect bacteria and engineer a scalable platform for fluorescence detection, therefore improving current methods and allowing for better treatment.

A simple and sensitive aptasensor with rolling circle amplification for viable Cronobacter sakazakii detection in powdered infant formula

Cronobacter sakazakii is a foodborne, emerging opportunistic pathogen that causes severe bacteremia, necrotizing enterocolitis, and sepsis with a mortality rate of up to 80%. In this study, we developed a simple and sensitive fluorescent turn-off aptasensor with rolling circle amplification assay for viable C. sakazakii detection in powdered infant formula. The results showed that the proposed aptasensor has good performance and specificity for detecting viable C. sakazakii in pure culture and powdered infant formula samples within 3 h. Under the optimal reaction conditions, there is a linear relationship between fluorescent intensity at 490 nm and logarithmic concentration of C. sakazakii in the range of 2.7 × 10⁵ to 2.7 × 10² cfu/mL, with a limit of detection of 2.7 × 10² cfu/mL in pure culture. The proposed aptasensor achieved a recovery of 104 to 111% in pure culture, and 96 to 107% in spiked powdered infant formula samples. The proposed aptasensor does not require complicated DNA extraction steps or antibodies, and can be performed at 37°C, making it a convenient and sensitive strategy for C. sakazakii detection.

Aptamers isolated against mosquito-borne pathogens

Mosquito-borne diseases are a major threat to public health. The shortcomings of diagnostic tools, especially those that are antibody-based, have been blamed in part for the rising annual morbidity and mortality caused by these diseases. Antibodies harbor a number of disadvantages that can be clearly addressed by aptamers as the more promising molecular recognition elements. Aptamers are defined as single-stranded DNA or RNA oligonucleotides generated by SELEX that exhibit high binding affinity and specificity against a wide variety of target molecules based on their unique structural conformations. A number of aptamers were developed against mosquito-borne pathogens such as Dengue virus, Zika virus, Chikungunya virus, Plasmodium parasite, Francisella tularensis, Japanese encephalitis virus, Venezuelan equine encephalitis virus, Rift Valley fever virus and Yellow fever virus. Intrigued by these achievements, we carry out a comprehensive overview of the aptamers developed against these mosquito-borne infectious agents. Characteristics of the aptamers and their roles in diagnostic, therapeutic as well as other applications are emphasized.

A novel liquid crystal-based aptasensor for ultra-low detection of ochratoxin a using a π-shaped DNA structure: Promising for future on-site detection test strips

Ochratoxin A (OTA) as the most dangerous mycotoxin is produced by Aspergillus Ochraceus and Penicillium verrucosum. OTA can be found in beverages and foodstuffs that induces the teratogenic, nephrotoxic, carcinogenic, and immunosuppressive effects on humans. Hence, developing highly sensitive methods for its detection is of great importance. Herein, a novel aptasensor was designed for the label-free monitoring of the ultra-low OTA levels by a combination of the superiority of aptamers and long-range orientational order of liquid crystals (LCs). The aptasensing strategy was based on the conformational switch of the immobilized π-shaped DNA structure on the glass substrate in presence of the target. A shift in the orientation of LCs from random to homeotropic state led to the apparent alteration of the optical appearance of the aptasensor platform from bright to dark. The LC-based aptasensor especially detects OTA at the ultra-trace level as low as 0.63 aM with comparable selectivity. The aptasensor could detect OTA successfully in the grape juice, coffee, and human serum samples. The LC-based aptasensor paves a way for developing portable and real-time sensing probes with high performance for food safety control and clinical application.

BipD of Burkholderia pseudomallei: Structure, Functions, and Detection Methods

Melioidosis is a severe disease caused by Burkholderia pseudomallei (B. pseudomallei), a Gram-negative environmental bacterium. It is endemic in Southeast Asia and Northern Australia, but it is underreported in many other countries. The principal routes of entry for B. pseudomallei are skin penetration, inhalation, and ingestion. It mainly affects immunocompromised populations, especially patients with type 2 diabetes mellitus. The laboratory diagnosis of melioidosis is challenging due to its non-specific clinical manifestations, which mimic other severe infections. The culture method is considered an imperfect gold standard for the diagnosis of melioidosis due to its low sensitivity. Antibody detection has low sensitivity and specificity due to the high seropositivity among healthy people in endemic regions. Antigen detection using various proteins has been tested for the rapid determination of B. pseudomallei; however, it presents certain limitations in terms of its sensitivity and specificity. Therefore, this review aims to frame the present knowledge of a potential target known as the Burkholderia invasion protein D (BipD), including future directions for its detection using an aptamer-based sensor (aptasensor).

Microfluidics-Based Sensing of Biospecies

Over the past decades, microfluidic devices based on many advanced techniques have aroused widespread attention in the fields of chemical, biological, and analytical applications. Integration of microdevices with a variety of chip designs will facilitate promising functionality. Notably, the combination of microfluidics with functional nanomaterials may provide creative ideas to achieve rapid and sensitive detection of various biospecies. In this review, focused on the microfluids and microdevices in terms of their fabrication, integration, and functions, we summarize the up-to-date developments in microfluidics-based analysis of biospecies, where biomarkers, small molecules, cells, and pathogens as representative biospecies have been explored in-depth. The promising applications of microfluidic biosensors including clinical diagnosis, food safety control, and environmental monitoring are also discussed. This review aims to highlight the importance of microfluidics-based biosensors in achieving high throughput, highly sensitive, and low-cost analysis and to promote microfluidics toward a wider range of applications.

Aptamers and Aptamer-Coupled Biosensors to Detect Water-Borne Pathogens

Aptamers can serve as efficient bioreceptors for the development of biosensing detection platforms. Aptamers are short DNA or RNA oligonucleotides that fold into specific structures, which enable them to selectively bind to target analytes. The method used to identify aptamers is Systematic Evolution of Ligands through Exponential Enrichment (SELEX). Target properties can have an impact on aptamer efficiencies. Therefore, characteristics of water-borne microbial targets must be carefully considered during SELEX for optimal aptamer development. Several aptamers have been described for key water-borne pathogens. Here, we provide an exhaustive overview of these aptamers and discuss important microbial aspects to consider when developing such aptamers.

From Small Molecules Toward Whole Cells Detection: Application of Electrochemical Aptasensors in Modern Medical Diagnostics

This paper focuses on the current state of art as well as on future trends in electrochemical aptasensors application in medical diagnostics. The origin of aptamers is presented along with the description of the process known as SELEX. This is followed by the description of the broad spectrum of aptamer-based sensors for the electrochemical detection of various diagnostically relevant analytes, including metal cations, abused drugs, neurotransmitters, cancer, cardiac and coagulation biomarkers, circulating tumor cells, and viruses. We described also possible future perspectives of aptasensors development. This concerns (i) the approaches to lowering the detection limit and improvement of the electrochemical aptasensors selectivity by application of the hybrid aptamer-antibody receptor layers and/or nanomaterials; and (ii) electrochemical aptasensors integration with more advanced microfluidic devices as user-friendly medical instruments for medical diagnostic of the future.

Baleen-Mimicking Virtual Filters for Rapid Detection of Pathogenic Bacteria in Water Using Magnetic Nanoparticle Chains and a Halbach Ring

We have developed a virtual filter that quickly and efficiently captures and detects pathogenic bacteria in large amounts of water. The virtual filter comprised magnetic nanoparticle chains (MNCs) obtained by cross-linking alginate-coated magnetic nanoparticles (MNPs). When the MNC solution in a disposable plastic tube was exposed to an external magnetic field, the MNCs were aligned along the magnetic field lines, forming a filter similar to a whale's baleen filtering system. A Halbach ring that increased the magnetic field inside the ring was used as the source of an external magnetic field. The Halbach ring produced a more uniform and denser alignment of MNCs than any other ring array. To demonstrate the performance of the virtual filter comprising MNCs, Escherichia coli (E. coli) O157-spiked water was injected into the virtual filter comprising polyethyleneimine-coated MNCs, and the concentration of E. coli O157 captured by electrostatic interaction was determined using qPCR analysis. The bacterial capture efficiency using MNCs was 90% at a flow rate of 5 mL/min, and the detection limit after 10 min of preconcentration of bacteria was 10 cfu/mL, which is 100 times lower than that obtained using qPCR alone.

Ratiometric fluorescence resonance energy transfer aptasensor for highly sensitive and selective detection of Acinetobacter baumannii bacteria in urine sample using carbon dots as optical nanoprobes

Development of sensitive and selective analytical method for accurate diagnosis of Acinetobacter baumannii (Ab) bacteria in biological samples is a challenge. Herein, we developed an ingenious ratiometric fluorescent aptasensor for sensitive and selective detection of (Ab) bacteria based on fluorescence resonance energy transfer (FRET) between ortho-phenylenediamines carbon dot (o-CD), nitrogen-doped carbon nanodots (NCND) as donor's species and graphene oxide (GO) as acceptor. NCND that assembled onto the edge of graphene oxide (GO) exhibited quenched photoluminescence emission, and with the absorption of the modified o-CD with aptamer (o-CD-ssDNA) onto the graphene oxide surface the fluorescence of o-CD was efficiently quenched. The aptamer (ssDNA) as a biorecognition element is bound with A. baumannii specifically which releases the o-CD-ssDNA from GO and the recovery of the fluorescence signal of o-CD, while the fluorescence intensity of NCND only slightly altered and acted as the reference signal in ratiometric fluorescence assay. The fluorescence intensity ratio (I₅₅₀ nm/I₄₄₀nm) varied from 2.0 to 10.0 with the concentration of bacteria changing from 2.0 × 10³ to 4.5 × 10⁷ cfu/mL and the low detection limit of 3.0 × 10² cfu/mL (S/N = 3). The feasibility of the developed aptasensor for selective detection of A. baumannii in urine sample with satisfactory results was also demonstrated.

Recent Progress in the Identification of Aptamers Against Bacterial Origins and Their Diagnostic Applications

Aptamers have gained an increasing role as the molecular recognition element (MRE) in diagnostic assay development, since their first conception thirty years ago. The process to screen for nucleic acid-based binding elements (aptamers) was first described in 1990 by the Gold Laboratory. In the last three decades, many aptamers have been identified for a wide array of targets. In particular, the number of reports on investigating single-stranded DNA (ssDNA) aptamer applications in biosensing and diagnostic platforms have increased significantly in recent years. This review article summarizes the recent (2015 to 2020) progress of ssDNA aptamer research on bacteria, proteins, and lipids of bacterial origins that have implications for human infections. The basic process of aptamer selection, the principles of aptamer-based biosensors, and future perspectives will also be discussed.