Ultra-sensitive and high-throughput CRISPR-p owered COVID-19 diagnosis

Rapid and one-tube detection of human metapneumovirus using the RT-RPA and CRISPR/Cas12a

Human metapneumovirus (HMPV) is a common pathogen that can cause acute respiratory tract infections and is prevalent worldwide. There is yet no effective vaccine or specific treatment for HMPV. Early, rapid, and accurate detection is essential to treat the disease and control the spread of infection. In this study, we created the One-tube assay by combining Reverse Transcription-Recombinase Polymerase Amplification (RT-RPA) with the CRISPR/Cas12a system. By targeting the nucleoprotein (N) gene of HMPV to design specific primers and CRISPR RNAs (crRNAs), combining RT-RPA and CRISPR/Cas12a, established the One-tube assay. Meanwhile, the reaction conditions of the One-tube assay were optimized to achieve rapid and visual detection of HMPV. This assay could detect HMPV at 1 copy/μL in 30 min, without cross-reactivity with nine other respiratory pathogens. We validated the detection performance using clinical specimens and showed that the coincidence rate was 98.53 %，compared to the quantitative reverse-transcription polymerase chain reaction. The One-tube assay reduced the detection time and simplified the manual operation, while maintaining the detection performance and providing a new platform for HMPV detection.

CRISPR-Cas12a-based ultrasensitive assay for visual detection of SARS-CoV-2 RNA

The development of ultrasensitive and visual methods is of great significance for molecular diagnosis at the point-of-care. In this study, we have integrated recombinase polymerase amplification (RPA) with the CRISPR-Cas12a system to design an ultrasensitive strategy for visual nucleic acid testing. RPA is utilized to amplify the target nucleic acid, producing amplicons that activate the single-stranded DNase property of CRISPR-Cas12a. The activated CRISPR-Cas12a then degrades the single-stranded DNA on magnetic nanoparticles (MNPs), releasing immobilized GOx from the MNPs which catalyses the chromogenic substrate. The developed method exhibits remarkable sensitivity, successfully detecting as low as 10 aM (∼6 copies per μL) of the target nucleic acid by visual colour changes in solution. The instrumental limit of detection is calculated to be 2.86 aM (∼2 copies per μL), comparable to the sensitivity of polymerase chain reaction (PCR). Importantly, this approach only requires isothermal incubation operation and does not involve costly instruments. The method has been validated by visually detecting the SARS-CoV-2 RNA gene fragment within 50 minutes. With its ultrasensitivity, simplicity of operation, and potential for integration into a point-of-care detection kit, this strategy holds great promise for nucleic acid testing in various settings.

Unravelling the diagnostic methodologies for SARS-CoV-2; the Indispensable need for developing point-of-care testing

The severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2)-caused COVID-19 pandemic that continues to be a global menace and since its emergence in the late 2019, SARS-CoV-2 has been vigorously spreading throughout the globe putting the whole world into a multidimensional calamity. The suitable diagnosis strategies are on the front line of the battle against preventing the spread of infections. Since the clinical manifestation of COVID-19 is shared between various diseases, detection of the unique impacts of the pathogen on the host along with the diagnosis of the virus itself should be addressed. Employing the most suitable approaches to specifically, sensitively and effectively recognize the infected cases may be a real game changer in controlling the outbreak and the crisis management. In that matter, point-of-care assays (POC) appears to be the potential option, due to sensitivity, specificity, affordable, and availability. Here we brief the most recent findings about the virus, its variants, and the conventional methods that have been used for its detection, along with the POC strategies that have been applied to the virus diagnosis and the developing technologies which can accelerate the diagnosis procedure yet maintain its efficiency.

A One-Step RPA-CRISPR Assay Using crRNA Based on Suboptimal Protospacer Adjacent Motif for Vibrio vulnificus Detection

Vibrio vulnificus is a hazardous foodborne pathogen responsible for approximately 95% of seafood-related deaths. This highlights the urgent requirement for specialized detection tools to be developed and used by food enterprises and food safety authorities. The DETECTR (DNA endonuclease targeted CRISPR trans reporter) system that combines CRISPR/Cas and recombinase polymerase amplification (RPA) has been utilized to develop a molecular detection assay for V. vulnificus. However, because the incompatibility between RPA and Cas12a cleavage has not been addressed, it is a two-step assay that lacks convenience and presents contamination risk. Here, we developed a one-step RPA-CRISPR assay for V. vulnificus using a special crRNA targeting a sequence with a suboptimal protospacer adjacent motif (PAM). The entire assay, conducted at 37°C, takes only 40-60 min, yields results visualized under blue light, and exhibits exceptional specificity and sensitivity (detecting 4 pathogen genome copies per reaction). This study offers a valuable tool for detecting V. vulnificus, aiding in foodborne infection prevention, and exemplifies one-step RPA-CRISPR assays managing Cas-cleavage activity through PAM adjustments.

Development of a CRISPR/Cas12a-based fluorescent detection method of Senecavirus A

BACKGROUND

Senecavirus A (SVA), identified in 2002, is known to cause porcine idiopathic vesicular disease (PIVD), which presents with symptoms resembling other vesicular diseases. This similarity complicates field diagnosis. Conventional molecular diagnostic techniques are limited by their cost, sensitivity, and requirement for complicated instrumentation. Therefore, developing an effective and accurate diagnostic method is crucial for timely identification and isolation of affected pigs, thereby preventing further disease spread.

METHODS

In this study, we developed a highly-specific and ultra-sensitive SVA detection method powered by CRISPR/Cas12a. To enhance the availability in laboratories with varied equipment conditions, microplate reader and ultraviolet light transilluminator were introduced. Moreover, PCR amplification has also been incorporated into this method to improve sensitivity. The specificity and sensitivity of this method were determined following the preparation of the recombinant Cas12a protein and optimization of the CRISPR/Cas12a-based trans-cleavage system.

RESULTS

The method demonstrated no cross-reactivity with ten kinds of viruses of swine. The minimum template concentration required to activate substantial trans-cleavage activity was determined to be 106 copies/µL of SVA templates. However, when PCR amplification was incorporated, the method achieved a detection limit of one copy of SVA templates per reaction. It also exhibited 100% accuracy in simulated sample testing. The complete testing process does not exceed three hours.

CONCLUSIONS

Importantly, this method utilizes standard laboratory equipment, making it accessible for use in resource-limited settings and facilitating widespread and ultra-sensitive screening during epidemics. Overall, the development of this method not only broadens the array of tools available for detecting SVA but also holds significant promise for controlling the spread of PIVD.

CRISPR-Cas based diagnostic tools: Bringing diagnosis out of labs

Timely detection is important for the effective management of infectious diseases. Reverse Transcription Polymerase Chain Reaction (RT-PCR) stands as the prime nucleic acid based test that is employed for the detection of infectious diseases. The method ensures sensitivity and specificity. However, RT-PCR is a relatively expensive technique due to the requirement of costly equipment and reagents. Further, it requires skilled personnel and established laboratories that are usually inaccessible in underdeveloped areas. On the other hand, rapid antigen based techniques are cost effective and easily accessible, but are less effective in terms of sensitivity and specificity. CRISPR-Cas systems are advanced diagnostic tools that combine the advantages of both PCR and antigen based detection techniques, and allows the rapid detection with high sensitivity/specificity. The present review aims to discuss the applicability of CRISPR-Cas based diagnostic tools for the infectious disease detection. The review further attempts to highlight the current limitations and future research directions to improve the CRISPR based diagnostic tools for rapid and effective disease detection.

Serum Cell-Free DNA-based Detection of Mycobacterium avium Complex Infection

Rationale: Mycobacterium avium complex (MAC) is the most common cause of nontuberculous mycobacterial (NTM) pulmonary disease (PD), which exhibits increasing global incidence. Current microbiologic methods routinely used in clinical practice lack sensitivity and have long latencies, leading to delays in diagnosis and treatment initiation and evaluation. A clustered regularly interspaced short palindromic repeats (CRISPR)-based assay that measures MAC cell-free DNA (cfDNA) concentrations in serum could provide a rapid means to detect MAC infection and monitor response to antimicrobial treatment. Objectives: To develop and optimize a CRISPR MAC assay for MAC infection detection and to evaluate its diagnostic and prognostic performance in two MAC disease cohorts. Methods: MAC cfDNA serum concentrations were measured in individuals with diagnoses of MAC disease or who had bronchiectasis or chronic obstructive pulmonary disease diagnoses without histories of NTM PD or NTM-positive sputum cultures. Diagnostic performance was analyzed using pretreatment serum from two cohorts. Serum MAC cfDNA changes during MAC PD treatment were evaluated in a subset of patients with MAC PD who received macrolide-based multidrug regimens. Measurements and Main Results: The CRISPR MAC assay detected MAC cfDNA in MAC PD with 97.6% (91.6-99.7%) sensitivity and 97.6% (91.5-99.7%) specificity overall. Serum MAC cfDNA concentrations markedly decreased after MAC-directed treatment initiation in patients with MAC PD who demonstrated MAC culture conversion. Conclusions: This study provides preliminary evidence for the utility of a serum-based CRISPR MAC assay to rapidly detect MAC infection and monitor the response to treatment.

Infrared spectroscopy combined with chemometrics in transflectance mode: An alternative approach in the photodiagnosis of COVID-19 using saliva

The Coronavirus Disease 2019 (COVID-19) pandemic, caused by the severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2), has required the search for sensitive, rapid, specific, and lower-cost diagnostic methods to meet the high demand. The gold standard method of laboratory diagnosis is real-time reverse transcription polymerase chain reaction (RT-PCR). However, this method is costly and results can take time. In the literature, several studies have already described the potential of Fourier transform infrared spectroscopy (FTIR) as a tool in the biomedical field, including the diagnosis of viral infections, while being fast and inexpensive. In view of this, the objective of this study was to develop an FTIR model for the diagnosis of COVID-19. For this analysis, all private clients who had performed a face-to-face collection at the Univates Clinical Analysis Laboratory (LAC Univates) within a period of six months were invited to participate. Data from clients who agreed to participate in the study were collected, as well as nasopharyngeal secretions and a saliva sample. For the development of models, the RT-PCR result of nasopharyngeal secretions was used as a reference method. Absorptions with high discrimination (p < 0.001) between GI (28 patients, RT-PCR test positive to SARS-CoV-2 virus) and GII (173 patients who did not have the virus detected in the test) were most relevant at 3512 cm-1, 3385 cm-1 and 1321 cm-1 after 2nd derivative data transformation. To carry out the diagnostic modeling, chemometrics via FTIR and Discriminant Analysis of Orthogonal Partial Least Squares (OPLS-DA) by salivary transflectance mode with one latent variable and one orthogonal signal correction component were used. The model generated predictions with 100 % sensitivity, specificity and accuracy. With the proposed model, in a single application of an individual's saliva in the FTIR equipment, results related to the detection of SARS-CoV-2 can be obtained in a few minutes of spectral evaluation.

Altered COVID-19 immunity in children with asthma by atopic status

Background

Severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) infection causes a spectrum of clinical outcomes that may be complicated by severe asthma. Antiviral immunity is often compromised in patients with asthma; however, whether this is true for SARS-CoV-2 immunity and children is unknown.

Objective

We aimed to evaluate SARS-CoV-2 immunity in children with asthma on the basis of infection or vaccination history and compared to respiratory syncytial viral or allergen (eg, cockroach, dust mite)-specific immunity.

Methods

Fifty-three children from an urban asthma study were evaluated for medical history, lung function, and virus- or allergen-specific immunity using antibody or T-cell assays.

Results

Polyclonal antibody responses to spike were observed in most children from infection and/or vaccination history. Children with atopic asthma or high allergen-specific IgE, particularly to dust mites, exhibited reduced seroconversion, antibody magnitude, and SARS-CoV-2 virus neutralization after SARS-CoV-2 infection or vaccination. TH1 responses to SARS-CoV-2 and respiratory syncytial virus correlated with antigen-respective IgG. Cockroach-specific T-cell activation as well as IL-17A and IL-21 cytokines negatively correlated with SARS-CoV-2 antibodies and effector functions, distinct from total and dust mite IgE. Allergen-specific IgE and lack of vaccination were associated with recent health care utilization. Reduced lung function (forced expiratory volume in 1 second ≤ 80%) was independently associated with (SARS-CoV-2) peptide-induced cytokines, including IL-31, whereas poor asthma control was associated with cockroach-specific cytokine responses.

Conclusion

Mechanisms underpinning atopic and nonatopic asthma may complicate the development of memory to SARS-CoV-2 infection or vaccination and lead to a higher risk of repeated infection in these children.

Integrating Recombinase Polymerase Amplification and Photosensitization Colorimetric Detection in One Tube for Fast Screening of C. sakazakii in Formula Milk Powder

Cronobacter sakazakii (C. sakazakii) is a widely existing opportunistic pathogen and thus threatens people with low immunity, especially infants. To prevent the outbreak, a rapid and accurate on-site testing method is required. The current standard culture-based method is time-consuming (3-4 days), while the nucleic acid amplification (PCR)-based detection is mostly carried out in central laboratories. Herein, isothermal recombinase polymerase amplification (RPA) coupled with a photosensitization colorimetric assay (PCA) was adopted for the on-site detection of C. sakazakii in powdered infant formulas (PIFs). The lowest visual detection concentration of C. sakazakii is 800 cfu/mL and 2 cfu/g after 8 h bacteria pre-enrichment. Furthermore, to avoid typical cap opening-resulted aerosol pollution, the PCA reagents were lyophilized onto the cap of the RPA tube (containing lyophilized RPA reagents). After amplification, the tube was subjected to simple shaking to mix the PCA reagents with the amplification products for light-driven color development. Such a one-tube assay offered a lowest concentration of 1000 copies of genomic DNA of C. sakazakii within 1 h. After 8 h of bacterial enrichment, the lowest detecting concentration could be pushed down to 5 cfu/g bacteria in PIF. To facilitate on-site monitoring, a portable, battery-powered PCA device was designed to mount the typical RPA 8-tube strip, and a color analysis cellphone APP was further employed for facile readout.

A multiplex RPA-CRISPR/Cas12a-based POCT technique and its application in human papillomavirus (HPV) typing assay

Persistent infection with high-risk human papillomavirus (HR-HPV) is the primary and initiating factor for cervical cancer. With over 200 identified HPV types, including 14 high-risk types that integrate into the host cervical epithelial cell DNA, early determination of HPV infection type is crucial for effective risk stratification and management. Presently, on-site immediate testing during the HPV screening stage, known as Point of Care Testing (POCT), remains immature, severely limiting the scope and scenarios of HPV screening. This study, guided by the genomic sequence patterns of HPV, established a multiplex recombinase polymerase amplification (RPA) technology based on the concept of "universal primers." This approach achieved the multiple amplification of RPA, coupled with the CRISPR/Cas12a system serving as a medium for signal amplification and conversion. The study successfully constructed a POCT combined detection system, denoted as H-MRC12a (HPV-Multiple RPA-CRISPR/Cas12a), and applied it to high-risk HPV typing detection. The system accomplished the typing detection of six high-risk HPV types (16, 18, 31, 33, 35, and 45) can be completed within 40 min, and the entire process, from sample loading to result interpretation, can be accomplished within 45 min, with a detection depth reaching 1 copy/μL for each high-risk type. Validation of the H-MRC12a detection system's reproducibility and specificity was further conducted through QPCR on 34 clinical samples. Additionally, this study explored and optimized the multiplex RPA amplification system and CRISPR system at the molecular mechanism level. Furthermore, the primer design strategy developed in this study offers the potential to enhance the throughput of H-MRC12a detection while ensuring sensitivity, providing a novel research avenue for high-throughput detection in Point-of-Care molecular pathogen studies.

Simple, Visual, Point-of-Care SARS-CoV-2 Detection Incorporating Recombinase Polymerase Amplification and Target DNA-Protein Crosslinking Enhanced Chemiluminescence

The ongoing COVID-19 pandemic, driven by persistent SARS-CoV-2 transmission, threatens human health worldwide, underscoring the urgent need for an efficient, low-cost, rapid SARS-CoV-2 detection method. Herein, we developed a point-of-care SARS-CoV-2 detection method incorporating recombinase polymerase amplification (RPA) and DNA-protein crosslinking chemiluminescence (DPCL) (RPADPCL). RPADPCL involves the crosslinking of biotinylated double-stranded RPA DNA products with horseradish peroxidase (HRP)-labeled streptavidin (SA-HRP). Modified products are captured using SA-labeled magnetic beads, and then analyzed using a chemiluminescence detector and smartphone after the addition of a chemiluminescent substrate. Under optimal conditions, the RPADPCL limit of detection (LOD) was observed to be 6 copies (within the linear detection range of 1-300 copies) for a plasmid containing the SARS-CoV-2 N gene and 15 copies (within the linear range of 10-500 copies) for in vitro transcribed (IVT) SARS-CoV-2 RNA. The proposed method is convenient, specific, visually intuitive, easy to use, and does not require external excitation. The effective RPADPCL detection of SARS-CoV-2 in complex matrix systems was verified by testing simulated clinical samples containing 10% human saliva or a virus transfer medium (VTM) spiked with a plasmid containing a SARS-CoV-2 N gene sequence or SARS-CoV-2 IVT RNA. Consequently, this method has great potential for detecting targets in clinical samples.

Establishment of an ultrasensitive and visual detection platform for Neospora caninum based-on the RPA-CRISPR/Cas12a system

Neospora caninum is a protozoan parasite that causes neosporosis in cattle, and leads to a high rate of abortion and severe financial losses. Rapid and accurate detection is particularly important for preventing and controlling neosporosis. In our research, a highly effective diagnostic technique based on the RPA-CRISPR/Cas system was created to successfully identify N. caninum against the Nc5 gene, fluorescent reporter system and the lateral flow strip (LFS) biosensor were exploited to display results. The specificity and sensitivity of the PRA-CRISPR/Cas12a assay were evaluated. We discovered that it was highly specific and did not react with any other pathogens. The limit of detection (LOD) for this technology was as low as one parasite per milliliter when employing the fluorescent reporter system, and was approximately ten parasites per milliliter based on the LFS biosensor and under blue or UV light. Meanwhile, the placental tissue samples were detected by our RPA-CRISPR/Cas12a detection platform were completely consistent with that of the nested PCR assay (59.4 %, 19/32). The canine feces were detected by our RPA-CRISPR/Cas12a detection platform were completely consistent with that of the nested PCR assay (8.6 %, 6/70). The RPA-CRISPR/Cas12a detection procedure was successfully finished in within 90 min and offers advantages of high sensitivity and specificity, speed and low cost. The technique was better suitable for extensive neosporosis screening in non-laboratory and resource-constrained locations. This study provided a new strategy for more rapid and portable identification of N. caninum.

COVID-19 Virus Structural Details: Optical and Electrochemical Detection

The increasing viral species have ruined people's health and the world's economy. Therefore, it is urgent to design bio-responsive materials to provide a vast platform for detecting a different family's passive or active virus. One can design a reactive functional unit for that moiety based on the particular bio-active moieties in viruses. Nanomaterials as optical and electrochemical biosensors have enabled better tools and devices to develop rapid virus detection. Various material science platforms are available for real-time monitoring and detecting COVID-19 and other viral loads. In this review, we discuss the recent advances of nanomaterials in developing the tools for optical and electrochemical sensing COVID-19. In addition, nanomaterials used to detect other human viruses have been studied, providing insights for developing COVID-19 sensing materials. The basic strategies for nanomaterials develop as virus sensors, fabrications, and detection performances are studied. Moreover, the new methods to enhance the virus sensing properties are discussed to provide a gateway for virus detection in variant forms. The study will provide systematic information and working of virus sensors. In addition, the deep discussion of structural properties and signal changes will offer a new gate for researchers to develop new virus sensors for clinical applications.

Combination-Lock SlipChip Integrating Nucleic Acid Sample Preparation and Isothermal LAMP Amplification for the Detection of SARS-CoV-2

Nucleic acid analysis with an easy-to-use workflow, high specificity and sensitivity, independence of sophisticated instruments, and accessibility outside of the laboratory is highly desirable for the detection and monitoring of infectious diseases. Integration of laboratory-quality sample preparation on a hand-held system is critical for performance. A SlipChip device inspired by the combination lock can perform magnetic bead-based nucleic acid extraction with several clockwise and counterclockwise rotations. A palm-sized base station was developed to assist sample preparation and provide thermal control of isothermal nucleic acid amplification without plug-in power. The loop-mediated isothermal amplification reaction can be performed with a colorimetric method and directly analyzed by the naked eye or with a mobile phone app. This system achieves good bead recovery during the sample preparation workflow and has minimal residue carryover from the lysis and elution buffers. Its performance is comparable to that of the standard laboratory protocol with real-time qPCR amplification methods. The entire workflow is completed in less than 35 min and the device can achieve 500 copies/mL sensitivity. Thirty clinical nasal swab samples were collected and tested with a sensitivity of 95% and a specificity of 100% for SARS-CoV-2. This combination-lock SlipChip provides a promising fast, easy-to-use nucleic acid test with bead-based sample preparation that produces laboratory-quality results for point-of-care settings, especially in home use applications.

A low-background and wash-free signal amplification F-CRISPR biosensor for sensitive quantitative and visible qualitative detection of Salmonella Typhimurium

In traditional CRISPR-based biosensors, the cleavage-induced signal generation is insufficient because only a signals is generated at a CRISPR-induced cleavage. Herein, we developed an improved CRISPR/Cas12a-based biosensor with an enlarged signal generation which integrated the hybridization chain reaction (HCR) and low-background Förster Resonance Energy Transfer (FRET) signal output mode. The HCR with nucleic acid self-assembly capability was used as a signal carrier to load more signaling molecules. To get the best signal amplification, three different fluorescence signal output modes (fluorescence recovery, FRET and low-background FRET) generated by two fluoresceins, FAM and Cy5, were fully investigated and compared. The results indicated that the low-background FRET signal output mode with the strictest signal generation conditions yielded the highest signal-to-noise ratio (S/N) (19.17) and the most obvious fluorescence color change (from red to yellow). In optimal conditions, the proposed biosensor was successfully applied for Salmonella Typhimurium (S. Typhimurium) detection with 6 h (including 4 h for sample pre-treatment) from the initial target processing to the final detection result. The qualitative sensitivity, reliant on color changes, was 103 CFU/mL. The quantitative sensitivity, calculated by the fluorescence value, were 1.62 × 101 CFU/mL, 3.72 × 102 CFU/mL, and 8.71 × 102 CFU/mL in buffer solution, S. Typhimurium-spiked milk samples, and S.Typhimurium-spiked chicken samples, respectively. The excellent detection performance of the proposed biosensor endowed its great application potential in food and environment safety monitoring.

UbiNAAT: a multiplexed point-of-care nucleic acid diagnostic platform for rapid at-home pathogen detection

The COVID-19 pandemic increased demands for respiratory disease testing to facilitate treatment and limit transmission, demonstrating in the process that most existing test options were too complex and expensive to perform in point-of-care or home scenarios. Lab-based molecular techniques can detect viral RNA in respiratory illnesses but are expensive and require trained personnel, while affordable antigen-based home tests lack sensitivity for early detection in newly infected or asymptomatic individuals. The few home RNA detection tests deployed were prohibitively expensive. Here, we demonstrate a point-of-care, paper-based rapid analysis device that simultaneously detects multiple viral RNAs; it is demonstrated on two common respiratory viruses (COVID-19 and influenza A) spiked onto a commercial nasal swab. The automated device requires no sample preparation by the user after insertion of the swab, minimizing user operation steps. We incorporated lyophilized amplification reagents immobilized in a porous matrix, a novel thermally actuated valve for multiplexed fluidic control, a printed circuit board that performs on-device lysis and amplification within a cell-phone-sized disposable device. Reverse transcription loop-mediated isothermal amplification (RT-LAMP) products are visualized via fluorescent dyes using a modified cell phone, resulting in detection of as few as 104 viral copies per swab across both pathogens within 30 minutes. This integrated platform could be commercialized in a form that would be inexpensive, portable, and sensitive; it can readily be multiplexed to detect as many as 8 different RNA or DNA sequences, and adapted to any desired RNA or DNA detection assays.

Pathogen Discovery in the Post-COVID Era

Pathogen discovery plays a crucial role in the fields of infectious diseases, clinical microbiology, and public health. During the past four years, the global response to the COVID-19 pandemic highlighted the importance of early and accurate identification of novel pathogens for effective management and prevention of outbreaks. The post-COVID era has ushered in a new phase of infectious disease research, marked by accelerated advancements in pathogen discovery. This review encapsulates the recent innovations and paradigm shifts that have reshaped the landscape of pathogen discovery in response to the COVID-19 pandemic. Primarily, we summarize the latest technology innovations, applications, and causation proving strategies that enable rapid and accurate pathogen discovery for both acute and historical infections. We also explored the significance and the latest trends and approaches being employed for effective implementation of pathogen discovery from various clinical and environmental samples. Furthermore, we emphasize the collaborative nature of the pandemic response, which has led to the establishment of global networks for pathogen discovery.

Graphene-based biosensors for detecting coronavirus: a brief review

The coronavirus (SARS-CoV-2) disease has affected the globe with 770 437 327 confirmed cases, including about 6 956 900 deaths, according to the World Health Organization (WHO) as of September 2023. Hence, it is imperative to develop diagnostic technologies, such as a rapid cost-effective SARS-CoV-2 detection method. A typical biosensor enables biomolecule detection with an appropriate transducer by generating a measurable signal from the sample. Graphene can be employed as a component for ultrasensitive and selective biosensors based on its physical, optical, and electrochemical properties. Herein, we briefly review graphene-based electrochemical, field-effect transistor (FET), and surface plasmon biosensors for detecting the SARS-CoV-2 target. In addition, details on the surface modification, immobilization, sensitivity and limit of detection (LOD) of all three sensors with regard to SARS-CoV-2 were reported. Finally, the point-of-care (POC) detection of SARS-CoV-2 using a portable smartphone and a wearable watch is a current topic of interest.

High-Throughput Liquid Chromatographic Analysis Using a Segmented Flow Injector with a 1 s Cycle Time

High-throughput screening (HTS) workflows are revolutionizing many fields, including drug discovery, reaction discovery and optimization, diagnostics, sensing, and enzyme engineering. Liquid chromatography (LC) is commonly deployed during HTS to reduce matrix effects, distinguish isomers, and preconcentrate prior to detection, but LC separation time often limits throughput. Although subsecond LC separations have been demonstrated, they are rarely utilized during HTS due to limitations associated with the speed of common autosamplers. In this work, these limits are overcome by utilizing droplet microfluidics for sample introduction. In the method, a train of samples segmented by air are continuously pumped into the inlet of an LC injection valve that is actuated once each sample fills the sample loop. Coupled with 2.1 mm diameter × 5 mm long columns packed with 2.7 μm superficially porous C18 particles operated at 5 mL/min, the injector enabled separation of 3 components at 1 s/sample and analysis of a 96-well plate in 1.6 min with <2% peak area relative standard deviation. Analyte-dependent carryover was minimized by including wash droplets composed of organic solvent in between sample droplets. High-throughput LC coupled with mass spectrometric detection using the segmented flow injector was applied to a screen of inhibitors of a cytochrome P450-catalyzed hydroxylation reaction. Measurements of the reaction substrate and product concentrations made using fast LC with the segmented flow injector correlated well with measurements made using a more conventional, 3 min LC method. These results demonstrate the potential for droplet microfluidics to be used for sample introduction during high-throughput LC analysis.

Demystifying PCR tests, challenges, alternatives, and future: A quick review focusing on COVID and fungal infections

The polymerase chain reaction (PCR) technique is one of the most potent tools in molecular biology. It is extensively used for various applications ranging from medical diagnostics to forensic science and food quality testing. This technique has facilitated to survive COVID-19 pandemic by identifying the virus-infected individuals effortlessly and effectively. This review explores the principles, recent advancements, challenges, and alternatives of PCR technique in the context of COVID-19 and fungal infections. The introduction of PCR technique for anyone new to this field is the primary aim of this review and thereby equips them to understand the science of COVID-19 and related fungal infections in a simplistic manner.

Micro- and nanosystems for the detection of hemorrhagic fever viruses

Hemorrhagic fever viruses (HFVs) are virulent pathogens that can cause severe and often fatal illnesses in humans. Timely and accurate detection of HFVs is critical for effective disease management and prevention. In recent years, micro- and nano-technologies have emerged as promising approaches for the detection of HFVs. This paper provides an overview of the current state-of-the-art systems for micro- and nano-scale approaches to detect HFVs. It covers various aspects of these technologies, including the principles behind their sensing assays, as well as the different types of diagnostic strategies that have been developed. This paper also explores future possibilities of employing micro- and nano-systems for the development of HFV diagnostic tools that meet the practical demands of clinical settings.

Highly sensitive and rapid point-of-care testing for HIV-1 infection based on CRISPR-Cas13a system

BACKGROUND

Human immunodeficiency virus type one (HIV-1) is the leading cause of acquired immunodeficiency syndrome (AIDS). AIDS remains a global public health concern but can be effectively suppressed by life-long administration of combination antiretroviral therapy. Early detection and diagnosis are two key strategies for the prevention and control of HIV/AIDS. Rapid and accurate point-of-care testing (POCT) provides critical tools for managing HIV-1 epidemic in high-risk areas and populations.

METHODS

In this study, a POCT for HIV-1 RNA was developed by CRISPR-Cas13a lateral flow strip combined with reverse transcriptase recombinase-aided amplification (RT-RAA) technology, the results can be directly observed by naked eyes.

RESULTS

Moreover, with the degenerate base-binding CRISPR-Cas13a system was introduced into the RT-RAA primer designing, the technology developed in this study can be used to test majority of HIV-1 RNA with limit of detection (LOD) 1 copy/μL, while no obvious cross-reaction with other pathogens. We evaluated this method for detecting HIV-1 RNA of clinical samples, the results showed that the sensitivity, specificity, positive predictive value (PPV), negative predictive value (NPV) and accuracy were 91.81% (85.03- 96.19%), 100% (92.60-100%), 100% (96.41-100%), 39.14% (25.59-54.60%) and 92.22% (86.89-95.88%), respectively. The lowest viral load detectable by this method was 112copies/mL.

CONCLUSION

Above all, this method provides a point-of-care detection of HIV-1 RNA, which is stable, simple and with good sensitivity and specificity. This method has potential to be developed for promoting early diagnosis and treatment effect monitoring of HIV patients in clinical.

Stability of Aerosolized SARS-CoV-2 on Masks and Transfer to Skin

The potential for masks to act as fomites in the transmission of SARS-CoV-2 has been suggested but not demonstrated experimentally or observationally. In this study, we aerosolized a suspension of SARS-CoV-2 in saliva and used a vacuum pump to pull the aerosol through six different types of masks. After 1 h at 28 °C and 80% RH, SARS-CoV-2 infectivity was not detectable on an N95 and surgical mask, was reduced by 0.7 log10 on a nylon/spandex mask, and was unchanged on a polyester mask and two different cotton masks when recovered by elution in a buffer. SARS-CoV-2 RNA remained stable for 1 h on all masks. We pressed artificial skin against the contaminated masks and detected the transfer of viral RNA but no infectious virus to the skin. The potential for masks contaminated with SARS-CoV-2 in aerosols to act as fomites appears to be less than indicated by studies involving SARS-CoV-2 in very large droplets.

CRISPR Assays for Disease Diagnosis: Progress to and Barriers Remaining for Clinical Applications

Numerous groups have employed the special properties of CRISPR/Cas systems to develop platforms that have broad potential applications for sensitive and specific detection of nucleic acid (NA) targets. However, few of these approaches have progressed to commercial or clinical applications. This review summarizes the properties of known CRISPR/Cas systems and their applications, challenges associated with the development of such assays, and opportunities to improve their performance or address unmet assay needs using nano-/micro-technology platforms. These include rapid and efficient sample preparation, integrated single-tube, amplification-free, quantifiable, multiplex, and non-NA assays. Finally, this review discusses the current outlook for such assays, including remaining barriers for clinical or point-of-care applications and their commercial development.

Gold nanostructures modified carbon-based electrode enhanced with methylene blue for point-of-care COVID-19 tests using isothermal amplification

The severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) envelope (E) and RNA-dependent RNA polymerase (RdRP) genes were detected via electrochemical measurements using a screen-printed carbon electrode (SPCE) (3-electrode system) coupled with a battery-operated thin-film heater based on the loop-mediated isothermal amplification (LAMP) technique. The working electrodes of the SPCE sensor were decorated with synthesized gold nanostars (AuNSs) to obtain a large surface area and improve sensitivity. The LAMP assay was enhanced using a real-time amplification reaction system to detect the optimal target genes (E and RdRP) of SARS-CoV-2. The optimized LAMP assay was performed with diluted concentrations (from 0 to 10⁹ copies) of the target DNA using 30 μM of methylene blue as a redox indicator. Target DNA amplification was conducted for 30 min at a constant temperature using a thin-film heater, and the final amplicon electrical signals were detected based on cyclic voltammetry curves. Our electrochemical LAMP analysis of SARS-CoV-2 clinical samples showed an excellent correlation with the Ct value of real-time reverse transcriptase-polymerase chain reaction, indicating successful validation of results. A linear relationship between the peak current response and the amplified DNA was observed for both genes. The AuNS-decorated SPCE sensor with the optimized LAMP primer enabled accurate analysis of both SARS-CoV-2-positive and -negative clinical samples. Therefore, the developed device is suitable for use as a point-of-care test DNA-based sensor for the diagnosis of SARS-CoV-2.

Diagnostics and analysis of SARS-CoV-2: current status, recent advances, challenges and perspectives

The disastrous spread of severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) has induced severe public healthcare issues and weakened the global economy significantly. Although SARS-CoV-2 infection is not as fatal as the initial outbreak, many infected victims suffer from long COVID. Therefore, rapid and large-scale testing is critical in managing patients and alleviating its transmission. Herein, we review the recent advances in techniques to detect SARS-CoV-2. The sensing principles are detailed together with their application domains and analytical performances. In addition, the advantages and limits of each method are discussed and analyzed. Besides molecular diagnostics and antigen and antibody tests, we also review neutralizing antibodies and emerging SARS-CoV-2 variants. Further, the characteristics of the mutational locations in the different variants with epidemiological features are summarized. Finally, the challenges and possible strategies are prospected to develop new assays to meet different diagnostic needs. Thus, this comprehensive and systematic review of SARS-CoV-2 detection technologies may provide insightful guidance and direction for developing tools for the diagnosis and analysis of SARS-CoV-2 to support public healthcare and effective long-term pandemic management and control.

Variety Differentiation: Development of a CRISPR DETECTR Method for the Detection of Single Nucleotide Polymorphisms (SNPs) in Cacao (Theobroma cacao) and Almonds (Prunus dulcis)

To prevent food fraud, products can be monitored by various chemical-analytical techniques. In this study, we present a CRISPR-Cpf1 DETECTR-based assay for the differentiation of plant ingredients in sweet confectionary like fine and bulk-cocoa, or bitter and sweet almonds. To enable rapid in-field analysis, the trans-cleavage activity of the Cpf1 enzyme was used to develop a DETECTR (DNA endonuclease-targeted CRISPR trans reporter) assay for simple, highly specific fluorometric detection of single nucleotide polymorphisms (SNPs). The endonuclease Cpf1 requires the protospacer adjacent motif (PAM) 5'-TTTV-3' for activation, but the recognition sequence is freely programmable. The SNPs were selected to alter the Cpf1 specific PAM sequence. As a result, sequences that do not carry the canonical PAM sequence are not detected and thus not cut. The optimized system was used for both raw material and processed products such as cocoa masses or marzipan with a limit of detection of 3 ng template DNA. In addition, we were able to implement the system in the context of an LFA (lateral flow assay) to serve as a basis for the development of rapid test systems.

Supplementary Information

The online version contains supplementary material available at 10.1007/s12161-023-02500-w.

A review of current effective COVID-19 testing methods and quality control

COVID-19 is a highly infectious disease caused by the SARS-CoV-2 virus, which primarily affects the respiratory system and can lead to severe illness. The virus is extremely contagious, early and accurate diagnosis of SARS-CoV-2 is crucial to contain its spread, to provide prompt treatment, and to prevent complications. Currently, the reverse transcriptase polymerase chain reaction (RT-PCR) is considered to be the gold standard for detecting COVID-19 in its early stages. In addition, loop-mediated isothermal amplification (LMAP), clustering rule interval short palindromic repeats (CRISPR), colloidal gold immunochromatographic assay (GICA), computed tomography (CT), and electrochemical sensors are also common tests. However, these different methods vary greatly in terms of their detection efficiency, specificity, accuracy, sensitivity, cost, and throughput. Besides, most of the current detection methods are conducted in central hospitals and laboratories, which is a great challenge for remote and underdeveloped areas. Therefore, it is essential to review the advantages and disadvantages of different COVID-19 detection methods, as well as the technology that can enhance detection efficiency and improve detection quality in greater details.

Application of Hybridization Chain Reaction/CRISPR-Cas12a for the Detection of SARS-CoV-2 Infection

Globally, the emergence of the coronavirus disease (COVID-19) has had a significant impact on life. The need for ongoing SARS-CoV-2 screening employing inexpensive and quick diagnostic approaches is undeniable, given the ongoing pandemic and variations in vaccine administration in resource-constrained regions. This study presents results as proof of concept to use hybridization chain reaction (HCR) and clustered regularly interspaced short palindromic repeats (CRISPR)/Cas12a complex for detecting SARS-CoV-2. HCR hairpin probes were designed using the NUPACK web-based program and further used to amplify the SARS-CoV-2 N gene in archived nasopharyngeal samples. The results were visualized using agarose gels and CRISPR Cas12a-based lateral flow strips. The assay was evaluated using the gold standard, real-time polymerase chain reaction (RT-PCR), as recommended by the World Health Organization (WHO). The results show the comparative efficiency of HCR to RT-PCR. This study shows that HCR and CRISPR are viable alternatives for diagnosing SARS-CoV-2 in samples.

Development of a CRISPR-Cas12a rapid diagnostic for human cytomegalovirus

Despite decades of research, human cytomegalovirus (CMV) continues to contribute to significant morbidity and mortality in transplant settings and remains the leading cause of viral congenital infections. Clinical diagnosis of CMV infection and/or reactivation under these settings is completed using real time quantitative polymerase chain reaction (RT-qPCR). This assay performs well but is hampered by poor sensitivity and a lack of standardization among testing facilities. A point-of-care rapid diagnostic to determine CMV viremia could address these issues and improve patient care. In this manuscript, we introduce clustered regularly interspaced short palindromic repeats (CRISPR)-Cas12a technology to design and validate a rapid diagnostic for CMV. This system was tested using CMV spiked human saliva and urine samples. Sensitivity of the assay was ∼10 infectious units (IU)/mL. Specificity of the assay was robust and failed to detect other herpesviruses. Collectively, we have designed and validated a rapid diagnostic for CMV that overcomes limitations of the current standard diagnostic. This assay has the potential to be used as a point-of-care screening tool in transplant and neonatal settings.

The relevant information about the severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) using the five-question approach (when, where, what, why, and how) and its impact on the environment

Severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) is regarded as a threat because it spreads quickly across the world without requiring a passport or establishing an identity. This tiny virus has wreaked havoc on people's lives, killed people, and created psychological problems all over the world. The viral spike protein (S) significantly contributes to host cell entry, and mutations associated with it, particularly in the receptor-binding protein (RBD), either facilitate the escape of virus from neutralizing antibodies or enhance its transmission by increasing the affinity for cell entry receptor, angiotensin-converting enzyme 2 (ACE2). The initial variants identified in Brazil, South Africa, and the UK have spread to various countries. On the other hand, new variants are being detected in India and the USA. The viral genome and proteome were applied for molecular detection techniques, and nanotechnology particles and materials were utilized in protection and prevention strategies. Consequently, the SARS-CoV-2 pandemic has resulted in extraordinary scientific community efforts to develop detection methods, diagnosis tools, and effective antiviral drugs and vaccines, where prevailing academic, governmental, and industrial institutions and organizations continue to engage themselves in large-scale screening of existing drugs, both in vitro and in vivo. In addition, COVID-19 pointed on the possible solutions for the environmental pollution globe problem. Therefore, this review aims to address SARS-CoV-2, its transmission, where it can be found, why it is severe in some people, how it can be stopped, its diagnosis and detection techniques, and its relationship with the environment.

A Cas12a ortholog with distinct TTNA PAM enables sensitive detection of HPV16/18

CRISPR-associated (Cas) nucleases are multifunctional tools for gene editing. Cas12a possesses several advantages, including the requirement of a single guide RNA and high fidelity of gene editing. Here, we tested three Cas12a orthologs from human gut samples and identified a LtCas12a that utilizes a TTNA protospacer adjacent motif (PAM) distinct from the canonical TTTV PAM but with equivalent cleavage ability and specificity. These features significantly broadened the targeting scope of Cas12a family. Furthermore, we developed a sensitive, accurate, and rapid human papillomavirus (HPV) 16/18 gene detection platform based on LtCas12a DNA endonuclease-targeted CRISPR trans reporter (DETECTR) and lateral flow assay (LFA). LtCas12a showed comparable sensitivity to quantitative polymerase chain reaction (qPCR) and no cross-reaction with 13 other high-risk HPV genotypes in detecting the HPV16/18 L1 gene. Taken together, LtCas12a can broaden the applications of the CRISPR-Cas12a family and serve as a promising next-generation tool for therapeutic application and molecular diagnosis.

Fluorescent detection of emerging virus based on nanoparticles: From synthesis to application

The spread of COVID-19 has caused huge economic losses and irreversible social impact. Therefore, to successfully prevent the spread of the virus and solve public health problems, it is urgent to develop detection methods with high sensitivity and accuracy. However, existing detection methods are time-consuming, rely on instruments, and require skilled operators, making rapid detection challenging to implement. Biosensors based on fluorescent nanoparticles have attracted interest in the field of detection because of their advantages, such as high sensitivity, low detection limit, and simple result readout. In this review, we systematically describe the synthesis, intrinsic advantages, and applications of organic dye-doped fluorescent nanoparticles, metal nanoclusters, up-conversion particles, quantum dots, carbon dots, and others for virus detection. Furthermore, future research initiatives are highlighted, including green production of fluorescent nanoparticles with high quantum yield, speedy signal reading by integrating with intelligent information, and error reduction by coupling with numerous fluorescent nanoparticles.

Label-Free Saliva Test for Rapid Detection of Coronavirus Using Nanosensor-Enabled SERS

The recent COVID-19 pandemic has highlighted the inadequacies of existing diagnostic techniques and the need for rapid and accurate diagnostic systems. Although molecular tests such as RT-PCR are the gold standard, they cannot be employed as point-of-care testing systems. Hence, a rapid, noninvasive diagnostic technique such as Surface-enhanced Raman scattering (SERS) is a promising analytical technique for rapid molecular or viral diagnosis. Here, we have designed a SERS- based test to rapidly diagnose SARS-CoV-2 from saliva. Physical methods synthesized the nanostructured sensor. It significantly increased the detection specificity and sensitivity by ~ten copies/mL of viral RNA (~femtomolar concentration of nucleic acids). Our technique combines the multiplexing capability of SERS with the sensitivity of novel nanostructures to detect whole virus particles and infection-associated antibodies. We have demonstrated the feasibility of the test with saliva samples from individuals who tested positive for SARS-CoV-2 with a specificity of 95%. The SERS-based test provides a promising breakthrough in detecting potential mutations that may come up with time while also preparing the world to deal with other pandemics in the future with rapid response and very accurate results.

Adsorption-Free Self-Priming Direct Digital Dual-crRNA CRISPR/Cas12a-Assisted Chip for Ultrasensitive Detection of Pathogens

Rapid and sensitive pathogen detection methods are critical for disease diagnosis and treatment. RPA-CRISPR/Cas12 systems have displayed remarkable potential in pathogen detection. A self-priming digital PCR chip is a powerful and attractive tool for nucleic detection. However, the application of the RPA-CRISPR/Cas12 system to the self-priming chip still has great challenges due to the problems of protein adsorption and two-step detection mode of RPA-CRISPR/Cas12. In this study, an adsorption-free self-priming digital chip was developed and a direct digital dual-crRNAs (3D) assay was established based on the chip for ultrasensitive detection of pathogens. This 3D assay combined the advantages of rapid amplification of RPA, specific cleavage of Cas12a, accurate quantification of digital PCR, and point-of-care testing (POCT) of microfluidics, enabling accurate and reliable digital absolute quantification of Salmonella in POCT. Our method can provide a good linear relationship of Salmonella detection in the range from 2.58 × 10¹ to 2.58 × 10⁴ cells/mL with a limit of detection ∼0.2 cells/mL within 30 min in a digital chip by targeting the invA gene of Salmonella. Moreover, the assay could directly detect Salmonella in milk without nucleic acid extraction. Therefore, the 3D assay has the significant potential to provide accurate and rapid pathogen detection in POCT. This study provides a powerful nucleic detection platform and facilitates the application of CRISPR/Cas-assisted detection and microfluidic chips.

A critical review of microfluidic systems for CRISPR assays

Reviewed are nucleic acid detection assays that incorporate clustered regularly interspaced short palindromic repeats (CRISPR)-based diagnostics and microfluidic devices and techniques. The review serves as a reference for researchers who wish to use CRISPR-Cas systems for diagnostics in microfluidic devices. The review is organized in sections reflecting a basic five-step workflow common to most CRISPR-based assays. These steps are analyte extraction, pre-amplification, target recognition, transduction, and detection. The systems described include custom microfluidic chips and custom (benchtop) chip control devices for automated assays steps. Also included are partition formats for digital assays and lateral flow biosensors as a readout modality. CRISPR-based, microfluidics-driven assays offer highly specific detection and are compatible with parallel, combinatorial implementation. They are highly reconfigurable, and assays are compatible with isothermal and even room temperature operation. A major drawback of these assays is the fact that reports of kinetic rates of these enzymes have been highly inconsistent (many demonstrably erroneous), and the low kinetic rate activity of these enzymes limits achievable sensitivity without pre-amplification. Further, the current state-of-the-art of CRISPR assays is such that nearly all systems rely on off-chip assays steps, particularly off-chip sample preparation.

Conventional and Novel Diagnostic Tools for the Diagnosis of Emerging SARS-CoV-2 Variants

Accurate identification at an early stage of infection is critical for effective care of any infectious disease. The "coronavirus disease 2019 (COVID-19)" outbreak, caused by the virus "Severe Acute Respiratory Syndrome Coronavirus 2 (SARS-CoV-2)", corresponds to the current and global pandemic, characterized by several developing variants, many of which are classified as variants of concern (VOCs) by the "World Health Organization (WHO, Geneva, Switzerland)". The primary diagnosis of infection is made using either the molecular technique of RT-PCR, which detects parts of the viral genome's RNA, or immunodiagnostic procedures, which identify viral proteins or antibodies generated by the host. As the demand for the RT-PCR test grew fast, several inexperienced producers joined the market with innovative kits, and an increasing number of laboratories joined the diagnostic field, rendering the test results increasingly prone to mistakes. It is difficult to determine how the outcomes of one unnoticed result could influence decisions about patient quarantine and social isolation, particularly when the patients themselves are health care providers. The development of point-of-care testing helps in the rapid in-field diagnosis of the disease, and such testing can also be used as a bedside monitor for mapping the progression of the disease in critical patients. In this review, we have provided the readers with available molecular diagnostic techniques and their pitfalls in detecting emerging VOCs of SARS-CoV-2, and lastly, we have discussed AI-ML- and nanotechnology-based smart diagnostic techniques for SARS-CoV-2 detection.

Coronavirus: a comparative analysis of detection technologies in the wake of emerging variants

An outbreak of the coronavirus disease caused by a novel pathogen created havoc and continues to affect the entire world. As the pandemic progressed, the scientific community was faced by the limitations of existing diagnostic methods. In this review, we have compared the existing diagnostic techniques such as reverse transcription polymerase chain reaction (RT-PCR), antigen and antibody detection, computed tomography scan, etc. and techniques in the research phase like microarray, artificial intelligence, and detection using novel materials; on the prospect of sample preparation, detection procedure (qualitative/quantitative), detection time, screening efficiency, cost-effectiveness, and ability to detect different variants. A detailed comparison of different techniques showed that RT-PCR is still the most widely used and accepted coronavirus detection method despite certain limitations (single gene targeting- in context to mutations). New methods with similar efficiency that could overcome the limitations of RT-PCR may increase the speed, simplicity, and affordability of diagnosis. In addition to existing devices, we have also discussed diagnostic devices in the research phase showing high potential for clinical use. Our approach would be of enormous benefit in selecting a diagnostic device under a given scenario, which would ultimately help in controlling the current pandemic caused by the coronavirus, which is still far from over with new variants emerging.

Recent Advances in Biosensors for Detection of COVID-19 and Other Viruses

This century has introduced very deadly, dangerous, and infectious diseases to humankind such as the influenza virus, Ebola virus, Zika virus, and the most infectious SARS-CoV-2 commonly known as COVID-19 and have caused epidemics and pandemics across the globe. For some of these diseases, proper medications, and vaccinations are missing and the early detection of these viruses will be critical to saving the patients. And even the vaccines are available for COVID-19, the new variants of COVID-19 such as Delta, and Omicron are spreading at large. The available virus detection techniques take a long time, are costly, and complex and some of them generates false negative or false positive that might cost patients their lives. The biosensor technique is one of the best qualified to address this difficult challenge. In this systematic review, we have summarized recent advancements in biosensor-based detection of these pandemic viruses including COVID-19. Biosensors are emerging as efficient and economical analytical diagnostic instruments for early-stage illness detection. They are highly suitable for applications related to healthcare, wearable electronics, safety, environment, military, and agriculture. We strongly believe that these insights will aid in the study and development of a new generation of adaptable virus biosensors for fellow researchers.

The Trend of CRISPR-Based Technologies in COVID-19 Disease: Beyond Genome Editing

Biotechnological approaches have always sought to utilize novel and efficient methods in the prevention, diagnosis, and treatment of diseases. This science has consistently tried to revolutionize medical science by employing state-of-the-art technologies in genomic and proteomic engineering. CRISPR-Cas system is one of the emerging techniques in the field of biotechnology. To date, the CRISPR-Cas system has been extensively applied in gene editing, targeting genomic sequences for diagnosis, treatment of diseases through genomic manipulation, and in creating animal models for preclinical researches. With the emergence of the COVID-19 pandemic in 2019, there is need for the development and modification of novel tools such as the CRISPR-Cas system for use in diagnostic emergencies. This system can compete with other existing biotechnological methods in accuracy, precision, and wide performance that could guarantee its future in these conditions. In this article, we review the various platforms of the CRISPR-Cas system meant for SARS-CoV-2 diagnosis, anti-viral therapeutic procedures, producing animal models for preclinical studies, and genome-wide screening studies toward drug and vaccine development.

Sensitive and Rapid Detection of Escherichia coli O157:H7 From Beef Samples Based on Recombinase Aided Amplification Assisted CRISPR/Cas12a System

BACKGROUND

Escherichia coli O157:H7, being the cause of hemorrhagic colitis in humans, is recognized as one of the most dangerous and widespread foodborne pathogens. A highly specific, sensitive, and rapid E. coli O157:H7 detection method needs to be developed since the traditional detection methods are complex, costly, and time-consuming.

OBJECTIVE

In this study, a recombinase aided amplification (RAA) assisted CRISPR/Cas12a (RAA-CRISPR/Cas12a) fluorescence platform for specific, sensitive, and rapid nucleic acid detection of E. coli O157:H7 was introduced.

METHODS

First, the feasibility (components of CRISPR/Cas12a system) of the developed method was evaluated. Then a total of 34 bacterial strains were used for the specificity test, and gradient dilutions of extracted DNA and bacterial solutions of E. coli O157:H7 were prepared for the sensitivity test. Third, a real-time PCR assay for detection of the specific wzy gene of E. coli O157:H7 (FDA's Bacteriological Analytical Manual) was used for sensitivity comparison. Finally, analysis of RAA-CRISPR/Cas12a detection in spiked and 93 real ground beef samples was carried out.

RESULTS

The developed RAA-CRISPR/Cas12a method showed high specificity, and the detection could be completed within 30 min (after 4 h enrichment in spiked ground beef samples). The limit of detection (LOD) of bacterial concentrations and genomic DNA was 5.4 × 102 CFU/mL and 7.5 × 10-4 ng/μL, respectively, which exhibited higher sensitivity than the RAA-gel electrophoresis and RT-PCR methods. Furthermore, it was shown that E. coli O157:H7 in ground beef samples could be positively detected after 4 h enrichment when the initial bacterial inoculum was 9.0  CFU/25 g. The detection results of the RAA-CRISPR/Cas12a method were 100% consistent with those of the RT-PCR and traditional culture-based methods while screening the E. coli O157:H7 from 93 local collected ground beef samples.

CONCLUSIONS

The developed RAA-CRISPR/Cas12a method showed high specificity, high sensitivity, and rapid positive detection of E. coli O157:H7 from ground beef samples.

HIGHLIGHTS

The RAA-CRISPR/Cas12a system proposed in this study provided an alternative molecular tool for quick, specific, sensitive, and accurate detection of E. coli O157:H7 in foods.

Systematically investigating the fluorescent signal readout of CRISPR-Cas12a for highly sensitive SARS-CoV-2 detection

The CRISPR/Cas system is widely used for molecular diagnostics after the discovery of trans-cleavage activity, especially now with the COVID-19 outbreak. However, the majority of contemporary trans-cleavage activity-based CRISPR/Cas biosensors exploited standard single-strand DNA (ssDNA) reporters, which were based on the FRET principle from pioneering research. An in-depth comparison and understanding of various fluorescent readout types are essential to facilitate the outstanding analytical performance of CRISPR probes. We investigated various types of fluorescent reporters of Cas12a comprehensively. Results show that trans-cleavage of Cas12a is not limited to ssDNA and dsDNA reporters, but can be extended to molecular beacons (MB). And MB reporters can achieve superior analytical performance compared with ssDNA and ds DNA reporters at the same conditions. Accordingly, we developed a highly-sensitive SARS-CoV-2 detection with the sensitivity as low as 100 fM were successfully achieved without amplification strategy. The model target of ORF1a could robustly identify the current widespread emerging SARS-CoV-2 variants. A real coronavirus GX/P2V instead of SARS-CoV-2 were chosen for practical application validation. And a minimum of 27 copies/mL was achieved successfully. This inspiration can also be applied to other Cas proteins with trans-cleavage activity, which provides new perspectives for simple, highly-sensitive and universal molecular diagnosis in various applications.

Clustered Regularly Interspaced short palindromic repeats-Based Microfluidic System in Infectious Diseases Diagnosis: Current Status, Challenges, and Perspectives

Mitigating the spread of global infectious diseases requires rapid and accurate diagnostic tools. Conventional diagnostic techniques for infectious diseases typically require sophisticated equipment and are time consuming. Emerging clustered regularly interspaced short palindromic repeats (CRISPR)/CRISPR-associated proteins (Cas) detection systems have shown remarkable potential as next-generation diagnostic tools to achieve rapid, sensitive, specific, and field-deployable diagnoses of infectious diseases, based on state-of-the-art microfluidic platforms. Therefore, a review of recent advances in CRISPR-based microfluidic systems for infectious diseases diagnosis is urgently required. This review highlights the mechanisms of CRISPR/Cas biosensing and cutting-edge microfluidic devices including paper, digital, and integrated wearable platforms. Strategies to simplify sample pretreatment, improve diagnostic performance, and achieve integrated detection are discussed. Current challenges and future perspectives contributing to the development of more effective CRISPR-based microfluidic diagnostic systems are also proposed.

Internet of medical things-enabled CRISPR diagnostics for rapid detection of SARS-CoV-2 variants of concern

Previous studies have highlighted CRISPR-based nucleic acid detection as rapid and sensitive diagnostic methods for severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2). Here, we reported an optimized CRISPR-Cas12a diagnostic platform for the safe and rapid detection of SARS-CoV-2 variants of concern (VOCs). This platform, which was referred to as CALIBURN-v2, could complete the diagnosis on extracted RNA samples within 25 min in a closed-lid reaction mode and had 100-fold increase in detection sensitivity in comparison with previous platforms. Most importantly, by integrating a portable device and smartphone user interface, CALIBURN-v2 allowed for cloud server-based data collection and management, thus transforming the point-of-care testing (POCT) platform to internet of medical things (IoMT) applications. It was found that IoMT-enabled CALIBURN-v2 could achieve 95.56% (172 out of 180) sensitivity for SARS-CoV-2 wild type and 94.38% (84 out of 89) overall sensitivity for SARS-CoV-2 variants including Delta and Omicron strains. Therefore, our study provides a feasible approach for IoMT-enabled CRISPR diagnostics for the detection of SARS-CoV-2 VOCs.

Fully Automated CRISPR-LAMP Platform for SARS-CoV-2 Delta and Omicron Variants

Integrated clustered regularly interspaced short palindromic repeat (CRISPR)-loop-mediated amplification (LAMP) technology is of great importance in CRISPR-based diagnostic systems, which urgently needs to be developed to improve diagnostic accuracy. A labor-free, contamination-free, and fully automated droplet manipulation platform for the CRISPR-LAMP technology has not been developed before. Herein, we propose a fully automated CRISPR-LAMP platform, which can precisely manipulate the CRISPR-LAMP droplet and perform combined reactions with high sensitivity and specificity. SARS-CoV-2 Spike T478K, D614G, P681R, and P681H mutations, typical point mutations of B.1.617.2 (Delta) and Omicron variants, are monitored with this platform with a detection limit of 102 copies/μL. Allele discrimination between the mutants and wild type is significant with the designed one/two-mismatch CRISPR RNA (crRNA) at a limit of 102 copies/μL. Chemically synthesized and modified crRNAs greatly increase the CRISPR-LAMP signal, which advance the wide application. Combined with the previously developed RdRp CRISPR-LAMP assay, clinical results showed that Spike T478K and P681H can discriminate the mutant type form the wild type with 70% (49.66-85.50%, 95% confidence interval) and 78% (57.27-90.62%, 95% confidence interval) sensitivity, respectively, and 100% specificity (51.68-100%, 95% confidence interval), and the RdRp target can detect SARS-CoV-2 strains with 85% sensitivity (65.39-95.14%, 95% confidence interval) and 100% specificity (51.68-100%, 95% confidence interval). We believe that this automatic digital microfluid (DMF) system can advance the integrated CRISPR-LAMP technology with higher stability, sensitivity, and practicability, also for other CRISPR-associated diagnostic platforms.

CRISPR-based systems for sensitive and rapid on-site COVID-19 diagnostics

The COVID-19 pandemic has strained healthcare systems. Sensitive, specific, and timely COVID-19 diagnosis is crucial for effective medical intervention and transmission control. RT-PCR is the most sensitive/specific, but requires costly equipment and trained personnel in centralized laboratories, which are inaccessible to resource-limited areas. Antigen rapid tests enable point-of-care (POC) detection but are significantly less sensitive/specific. CRISPR-Cas systems are compatible with isothermal amplification and dipstick readout, enabling sensitive/specific on-site testing. However, improvements in sensitivity and workflow complexity are needed to spur clinical adoption. We outline the mechanisms/strategies of major CRISPR-Cas systems, evaluate their on-site diagnostic capabilities, and discuss future research directions.

CRISPR-Cas13: A new technology for the rapid detection of pathogenic microorganisms

Pathogenic microorganisms have major impacts on human lives. Rapid and sensitive diagnostic tools are urgently needed to facilitate the early treatment of microbial infections and the effective control of microbial transmission. CRISPR-Cas13 employs programmable RNA to produce a sensitive and specific method with high base resolution and thus to provide a novel tool for the rapid detection of microorganisms. The review aims to provide insights to spur further development by summarizing the characteristics of effectors of the CRISPR-Cas13 system and by describing the latest research into its application in the rapid detection of pathogenic microorganisms in combination with nucleic acid extraction, isothermal amplification, and product detection.

Advances in Biosensing Technologies for Diagnosis of COVID-19

The COVID-19 pandemic has severely impacted normal human life worldwide. Due to its rapid community spread and high mortality statistics, the development of prompt diagnostic tests for a massive number of samples is essential. Currently used traditional methods are often expensive, time-consuming, laboratory-based, and unable to handle a large number of specimens in resource-limited settings. Because of its high contagiousness, efficient identification of SARS-CoV-2 carriers is crucial. As the advantages of adopting biosensors for efficient diagnosis of COVID-19 increase, this narrative review summarizes the recent advances and the respective reasons to consider applying biosensors. Biosensors are the most sensitive, specific, rapid, user-friendly tools having the potential to deliver point-of-care diagnostics beyond traditional standards. This review provides a brief introduction to conventional methods used for COVID-19 diagnosis and summarizes their advantages and disadvantages. It also discusses the pathogenesis of COVID-19, potential diagnostic biomarkers, and rapid diagnosis using biosensor technology. The current advancements in biosensing technologies, from academic research to commercial achievements, have been emphasized in recent publications. We covered a wide range of topics, including biomarker detection, viral genomes, viral proteins, immune responses to infection, and other potential proinflammatory biomolecules. Major challenges and prospects for future application in point-of-care settings are also highlighted.