Designed antifouling peptides planted in conducting polymers through controlled partial doping for electrochemical detection of biomarkers in human serum

An antifouling electrochemical sensor based on a U-shaped four-in-one peptide and poly(3,4-ethylenedioxythiophene) for vancomycin detection in fresh goat milk

Nonspecific adsorption of biomolecules (notably, proteins) and bacteria from unsterilized food may occur on sensor surfaces, which is still a challenge for food safety sensing. To achieve sensitive detection of unsterilized raw-food materials, in this study, a U-shaped four-in-one peptide with the sequence Ac-FLKLLKKLL-DOPA3-PPPPEEKDQDKEKaa that exhibited anchoring, antifouling, antibacterial, and recognition properties was designed. The peptide-modified sensor surface effectively prevented bacterial adhesion and proliferation while resisting biomolecule adsorption (signal inhibition rate as low as 0.51 % in single-protein solutions). A highly conductive polymer layer of poly(3,4-ethylenedioxythiophene) was introduced to improve the electrochemical performance before U-shaped four-in-one peptide anchoring. The proposed sensor could accurately detect vancomycin, with a wide linear range and limit of detection of 0.05-10 μg mL-1 and 2.06 ng mL-1 (S/N = 3), respectively. Satisfactory recovery rates (101.3-105.3 %) were achieved using diluted fresh goat milk.

Molecularly imprinted composite-based biosensor for the determination of SARS-CoV-2 nucleocapsid protein

This article aims to present a comparative study of three polypyrrole-based molecularly imprinted polymer (MIP) systems for the detection of the recombinant severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) nucleocapsid protein (rN). The rN is known for its relatively low propensity to mutate compared to other SARS-CoV-2 antigens. The aforementioned systems include screen-printed carbon electrodes (SPCE) modified with gold nanostructures (MIP1), platinum nanostructures (MIP2), and the unmodified SPCE (MIP3), which was used for control. Pulsed amperometric detection (PAD) was employed as the detection technique, offering the advantage of label-free detection without the need for an additional redox probe. Calibration curves were constructed using the obtained data to evaluate the response of each system. Non-imprinted systems were also tested in parallel to evaluate the contribution of non-specific binding and assess the affinity sensor's efficiency. The analysis of calibration curves revealed that the AuNS-based MIP1 system exhibited the lowest contribution of non-specific binding and displayed a better fit with the chosen fitting model compared to the other systems. Further analysis of this system included determining the limit of detection (LOD) (51.2 ± 2.8 pg/mL), the limit of quantification (LOQ) (153.9 ± 8.3 pg/mL), and a specificity test using a recombinant receptor-binding domain of SARS-CoV-2 spike protein as a control. Based on the results, the AuNS-based MIP1 system demonstrated high specificity and sensitivity for the label-free detection of SARS-CoV-2 nucleocapsid protein. The utilization of PAD without the need for additional redox probes makes this sensing system convenient and valuable for rapid and accurate virus detection.

Carrageenan derived polyelectrolyte complexes material: An effective bifunctional for electrochemical sensing of sulfamethazine and antibacterial activity

Biopolymer-derived polyelectrolyte complexes (PECs) are a class of materials that have emerged as promising candidates for developing advanced electrochemical sensors due to their tunable properties, biocompatibility, cost-effective production, and high surface area. PECs are formed by combining positively and negatively charged polymers, resulting in a network with intriguing properties that can be tailored for specific sensing applications. The resultant PECs-based nanocomposites were used to modify the glassy carbon electrode (GCE) to detect the sulfamethazine (SFZ) antibiotic drug. In addition, electrochemical studies using electrochemical impedance spectroscopy (EIS), cyclic voltammetry (CV), and differential pulse voltammetry (DPV) are used to evaluate the SFZ detection ability. Similarly, various microscopic and spectroscopic studies investigated the nano composite's structural features and morphological behavior. The κ-CGN/P(Am-co-DMDAAc)-GO modified GCE demonstrated excellent detection ability of SFZ with the nano molar range and without interference with similar structural components. Furthermore, the newly fabricated electrode κ-CGN/P(Am-co-DMDAAc)-GO was derived from naturally available materials, water-soluble, low cost, biocompatible, exhibits good conductivity, and excellent catalytic properties. Finally, κ-CGN/P(Am-co-DMDAAc)-GO- modified GCE has versatile, practical applications for detecting SFZ in real-time samples and determining the efficacy of an antibacterial activity.

An antifouling electrochemical biosensor based on chondroitin sulfate-functionalized polyaniline and DNA-peptide conjugates for cortisol determination in body fluids

An antifouling electrochemical biosensor was constructed based on chondroitin sulfate (CS)-functionalized polyaniline (CS/PANI) and DNA-peptide conjugates that is capable of assaying cortisol directly in human fluids. First, a CS-doped PANI nanocomposite (sensing substrate) was electrodeposited onto a bare glassy carbon electrode to promote electron transport, providing the sensing signal from high peak currents of PANI to improve the sensitivity of the biosensor. Dendritic DNA-peptide conjugates were assembled onto the CS/PANI by exploiting the highly specific and strong interactions between biotin and streptavidin, which amplified the sensing signals toward cortisol. The integration of the DNA-peptide conjugates into the CS/PANI nanocomposite ensured that the biosensor had a synergistic antifouling effect and was capable of detecting cortisol directly in body fluids (sweat, saliva, and tears). When assaying cortisol levels, the biosensor exhibited a linear range over the cortisol concentrations of 1 × 10-12-1 × 10-7 M and a low limit of detection (0.333 × 10-12 M). In the detection of cortisol in real samples, the relative standard deviation (RSD) of the biological samples ranged from 2.94 to 4.23%, and the recovery were calculated to be in the range 95.2-103.2%.

Durable underwater super-oleophobic/super-hydrophilic conductive polymer membrane for oil-water separation

Oily sewage has made serious impact on environment and people's life, and its treatment has become a global problem to be urgently solved. Oil-water separation has been considered to be an effective method to treat oily sewage at present. In this work, an underwater super-oleophobic/super-hydrophilic membrane with oil-water separation and self-cleaning properties was fabricated by electrochemical oxidation of sodium lignosulfonate doped polypyrrole. The membrane showed super-hydrophilicity for water-removal in air and super-hydrophilicity for oil-removal underwater in both oxidation and reduction states. The oil-water separation efficiency of the membranes for different organics exceeded 98.44%, no matter in oxidation or reduction state. Moreover, the membrane still exhibited excellent performance in terms of the oil-water separation efficiency and flux after 70 cycles, which were greater than 97.18% and 70.14 L·m-2·h-1, respectively. Simultaneously, through exploration of the mechanism, it was found that the larger anion kept intact in the membrane during the redox process, which made the stability of composition and performance. Thus, the membrane with advantageous properties, including underwater super-oleophobic/super-hydrophilicity, high oil-water separation efficiency, high circulating rate and stability, has significant potential in separation and collection of oily sewage.

Chemical antifouling strategies in sensors for food analysis: A review

Surface biofouling induced by the undesired nonspecific adsorption of foulants (e.g., coexisting proteins and cells) in food matrices is a major issue of sensors for food analysis, hindering their reliability and accuracy of sensing. This issue can be addressed by developing antifouling strategies to prevent or alleviate nonspecific binding. Chemical antifouling strategies involve the use of chemical modifiers (i.e., antifouling materials) to strongly hydrate the surface and reduce surface biofouling. Through appropriate immobilization approaches, antifouling materials can be tethered onto sensors to form antifouling surfaces with well-ordered structures, balanced surface charges, and appropriate surface density and thickness. A rational antifouling surface can reduce the matrix effect, simplify sample pretreatment, and improve analytical performance. This review summarizes recent developments in chemical antifouling strategies in sensing. Surface antifouling mechanisms and common antifouling materials are described, and factors that may influence the antifouling effects of antifouling surfaces and approaches incorporating antifouling materials onto sensing surfaces are highlighted. Moreover, the specific applications of antifouling sensors in food analysis are introduced. Finally, we provide an outlook on future developments in antifouling sensors for food analysis.

Chemically revised conducting polymers with inflammation resistance for intimate bioelectronic electrocoupling

Conducting polymers offer attractive mixed ionic-electronic conductivity, tunable interfacial barrier with metal, tissue matchable softness, and versatile chemical functionalization, making them robust to bridge the gap between brain tissue and electronic circuits. This review focuses on chemically revised conducting polymers, combined with their superior and controllable electrochemical performance, to fabricate long-term bioelectronic implants, addressing chronic immune responses, weak neuron attraction, and long-term electrocommunication instability challenges. Moreover, the promising progress of zwitterionic conducting polymers in bioelectronic implants (≥4 weeks stable implantation) is highlighted, followed by a comment on their current evolution toward selective neural coupling and reimplantable function. Finally, a critical forward look at the future of zwitterionic conducting polymers for in vivo bioelectronic devices is provided.

Perspectives and trends in advanced optical and electrochemical biosensors based on engineered peptides

With the advancement of life medicine, in vitro diagnostics (IVD) technology has become an auxiliary tool for early diagnosis of diseases. However, biosensors for IVD now face some disadvantages such as poor targeting, significant antifouling properties, low density of recognized molecules, and poor stability. In recent years, peptides have been demonstrated to have various functions in unnatural biological systems, such as targeting properties, antifouling properties, and self-assembly properties, which indicates that peptides can be engineered. These properties of peptides, combined with their good biocompatibility, can be well applied to the design of biosensors to solve the problems mentioned above. This review provides an overview of the properties of engineered functional peptides and their applications in enhancing biosensor performance, mainly in the field of optics and electrochemistry.

Anti-Fouling Strategies of Electrochemical Sensors for Tumor Markers

The early detection and prognosis of cancers require sensitive and accurate detection methods; with developments in medicine, electrochemical biosensors have been developed that can meet these clinical needs. However, the composition of biological samples represented by serum is complex; when substances undergo non-specific adsorption to an electrode and cause fouling, the sensitivity and accuracy of the electrochemical sensor are affected. In order to reduce the effects of fouling on electrochemical sensors, a variety of anti-fouling materials and methods have been developed, and enormous progress has been made over the past few decades. Herein, the recent advances in anti-fouling materials and strategies for using electrochemical sensors for tumor markers are reviewed; we focus on new anti-fouling methods that separate the immunorecognition and signal readout platforms.

Practical tips and new trends in electrochemical biosensing of cancer-related extracellular vesicles

To tackle cancer and provide prompt diagnoses and prognoses, the constantly evolving biosensing field is continuously on the lookout for novel markers that can be non-invasively analysed. Extracellular vesicles (EVs) may represent a promising biomarker that also works as a source of biomarkers. The augmented cellular activity of cancerous cells leads to the production of higher numbers of EVs, which can give direct information on the disease due to the presence of general and cancer-specific surface-tethered molecules. Moreover, the intravesicular space is enriched with other molecules that can considerably help in the early detection of neoplasia. Even though EV-targeted research has indubitably received broad attention lately, there still is a wide lack of practical and effective quantitative procedures due to difficulties in pre-analytical and analytical phases. This review aims at providing an exhaustive outline of the recent progress in EV detection using electrochemical and photoelectrochemical biosensors, with a focus on handling approaches and trends in the selection of bioreceptors and molecular targets related to EVs that might guide researchers that are approaching such an unstandardised field.

Conducting Polymers as Versatile Tools for the Electrochemical Detection of Cancer Biomarkers

The detection of cancer biomarkers has recently become an established method for the early diagnosis of cancer. The sensitive analysis of specific biomarkers can also be clinically applied for the determination of response to treatment and monitoring of disease progression. Because of the ultra-low concentration of cancer biomarkers in body fluids, diagnostic tools need to be highly sensitive and specific. Conducting polymers (CPs) are particularly known to exhibit numerous features that enable them to serve as excellent materials for the immobilization of biomolecules and the facilitation of electron transfer. Their large surface area, porosity, and the presence of functional groups provide CPs with binding sites suitable for capturing biomarkers, in addition to their sensitive and easy detection. The aim of this review is to present a comprehensive summary of the available electrochemical biosensors based on CPs and their composites for the ultrasensitive detection of selected cancer biomarkers. We have categorized the study based on different types of targeted biomarkers such as DNAs, miRNAs, proteins, enzymes, neurotransmitters and whole cancer cells. The sensitivity of their detection is enhanced by the presence of CPs, providing a limit of detection as low as 0.5 fM (for miRNA) and 10 cells (for the detection of cancer cells). The methods of multiplex biomarker detection and cell capture are indicated as the most promising category, since they furnish more accurate and reliable results. Ultimately, we discuss the available CP-based electrochemical sensors and promising approaches for facilitating cancer diagnosis and treatment.

Recent Developments and Implementations of Conductive Polymer-Based Flexible Devices in Sensing Applications

Flexible sensing devices have attracted significant attention for various applications, such as medical devices, environmental monitoring, and healthcare. Numerous materials have been used to fabricate flexible sensing devices and improve their sensing performance in terms of their electrical and mechanical properties. Among the studied materials, conductive polymers are promising candidates for next-generation flexible, stretchable, and wearable electronic devices because of their outstanding characteristics, such as flexibility, light weight, and non-toxicity. Understanding the interesting properties of conductive polymers and the solution-based deposition processes and patterning technologies used for conductive polymer device fabrication is necessary to develop appropriate and highly effective flexible sensors. The present review provides scientific evidence for promising strategies for fabricating conductive polymer-based flexible sensors. Specifically, the outstanding nature of the structures, conductivity, and synthesis methods of some of the main conductive polymers are discussed. Furthermore, conventional and innovative technologies for preparing conductive polymer thin films in flexible sensors are identified and evaluated, as are the potential applications of these sensors in environmental and human health monitoring.

Exploring the Role of 2D-Graphdiyne as a Charge Carrier Layer in Field-Effect Transistors for Non-Covalent Biological Immobilization against Human Diseases

Graphdiyne's (GDY's) outstanding features have made it a novel 2D nanomaterial and a great candidate for electronic gadgets and optoelectronic devices, and it has opened new opportunities for the development of highly sensitive electronic and optical detection methods as well. Here, we testified a non-covalent grafting strategy in which GDY serves as a charge carrier layer and a bioaffinity substrate to immobilize biological receptors on GDY-based field-effect transistor (FET) devices. Firm non-covalent anchoring of biological molecules via pyrene groups and electrostatic interactions in addition to preserved electrical properties of GDY endows it with features of an ultrasensitive and stable detection mechanism. With emerging new forms and extending the subtypes of the already existing fatal diseases, genetic and biological knowledge demands more details. In this regard, we constructed simple yet efficient platforms using GDY-based FET devices in order to detect different kinds of biological molecules that threaten human health. The resulted data showed that the proposed non-covalent bioaffinity assays in GDY-based FET devices could be considered reliable strategies for novel label-free biosensing platforms, which still reach a high on/off ratio of over 10⁴. The limits of detection of the FET devices to detect DNA strands, the CA19-9 antigen, microRNA-155, the CA15-3 antigen, and the COVID-19 antigen were 0.2 aM, 0.04 pU mL^-1, 0.11 aM, 0.043 pU mL^-1, and 0.003 fg mL^-1, respectively, in the linear ranges of 1 aM to 1 pM, 1 pU mL^-1 to 0.1 μU mL^-1, 1 aM to 1 pM, 1 pU mL^-1 to 10 μU mL^-1, and 1 fg mL^-1 to 10 ng mL^-1, respectively. Finally, the extraordinary performance of these label-free FET biosensors with low detection limits, high sensitivity and selectivity, capable of being miniaturized, and implantability for in vivo analysis makes them a great candidate in disease diagnostics and point-of-care testing.

Nano-Scaled Materials and Polymer Integration in Biosensing Tools

The evolution of biosensors and diagnostic devices has been thriving in its ability to provide reliable tools with simplified operation steps. These evolutions have paved the way for further advances in sensing materials, strategies, and device structures. Polymeric composite materials can be formed into nanostructures and networks of different types, including hydrogels, vesicles, dendrimers, molecularly imprinted polymers (MIP), etc. Due to their biocompatibility, flexibility, and low prices, they are promising tools for future lab-on-chip devices as both manufacturing materials and immobilization surfaces. Polymers can also allow the construction of scaffold materials and 3D structures that further elevate the sensing capabilities of traditional 2D biosensors. This review discusses the latest developments in nano-scaled materials and synthesis techniques for polymer structures and their integration into sensing applications by highlighting their various structural advantages in producing highly sensitive tools that rival bench-top instruments. The developments in material design open a new door for decentralized medicine and public protection that allows effective onsite and point-of-care diagnostics.

Sensitive, Highly Stable, and Anti-Fouling Electrode with Hexanethiol and Poly-A Modification for Exosomal microRNA Detection

It remains a huge challenge to integrate the sensitivity, stability, reproducibility, and anti-fouling ability of electrochemical biosensors for practical applications. Herein, we propose a self-assembled electrode combining hexanethiol (HT), poly-adenine (poly-A), and cholesteryl-modified DNA to meet this challenge. HT can tightly pack at the electrode interface to form a hydrophobic self-assembled monolayer (SAM), effectively improving the stability and signal-to-noise ratio (SNR) of electrochemical detection. Cholesteryl-modified DNA was immobilized at the electrode through the hydrophobic interaction with HT to avoid the competition between the SAM and the DNA probe on the gold site. Thus, the assembly efficiency and uniformity of the DNA probe as well as the detection reproducibility were increased remarkedly. Poly-A was added on the HT assembled electrode to occupy the unreacted sites of gold to further enhance the anti-fouling ability. The combination of HT and poly-A allows the electrode to ensure favorable anti-fouling ability without sacrificing the detection performance. On this basis, we proposed a dual-signal amplification electrochemical biosensor for the detection of exosomal microRNAs, which showed excellent sensitivity with a detection limit down to 1.46 aM. Importantly, this method has been successfully applied to detect exosomal microRNA-21 in cells and human serum samples, proving its potential utility in cancer diagnosis.

Antifouling peptides combined with recognizing DNA probes for ultralow fouling electrochemical detection of cancer biomarkers in human bodily fluids

Herein, a universal strategy for the construction of highly sensitive and low fouling biosensors was proposed based on antifouling peptides conjugated with recognizing DNA probes. The peptide-DNA conjugate was formed through a reagent-free click reaction between a typical DNA aptamer modified with 5'-dibenzocyclooctyne (DBCO) and the designed antifouling peptide terminated with biotin and the azide group at its two ends. With the assistance of streptavidin (SA), the electrochemical biosensor was constructed via immobilization of the straight peptides and peptide-DNA conjugates in sequence onto the electrode surface modified with electrodeposited poly(3,4-ethylenedioxythiophene) (PEDOT) and gold nanoparticles (AuNPs). The prepared biosensor exhibited excellent antifouling performances in various human bodily fluids such as serum, sweat and urine, with a wide linear response range for CA125 from 0.01 U mL^-1 to 1000 U mL^-1, and a low limit of detection of 0.003 U mL^-1. Combining the advantages of the antifouling peptide and recognizing DNA probe, this sensing strategy was capable of assaying CA125 in undiluted human serum, and it also offered a highly promising way for the development of different antifouling biosensors through the conjugation of antifouling peptides with various DNA probes.

A Review of Biosensors for Detecting Tumor Markers in Breast Cancer

Breast cancer has the highest cancer incidence rate in women. Early screening of breast cancer can effectively improve the treatment effect of patients. However, the main diagnostic techniques available for the detection of breast cancer require the corresponding equipment, professional practitioners, and expert analysis, and the detection cost is high. Tumor markers are a kind of active substance that can indicate the existence and growth of the tumor. The detection of tumor markers can effectively assist the diagnosis and treatment of breast cancer. The conventional detection methods of tumor markers have some shortcomings, such as insufficient sensitivity, expensive equipment, and complicated operations. Compared with these methods, biosensors have the advantages of high sensitivity, simple operation, low equipment cost, and can quantitatively detect all kinds of tumor markers. This review summarizes the biosensors (2013-2021) for the detection of breast cancer biomarkers. Firstly, the various reported tumor markers of breast cancer are introduced. Then, the development of biosensors designed for the sensitive, stable, and selective recognition of breast cancer biomarkers was systematically discussed, with special attention to the main clinical biomarkers, such as human epidermal growth factor receptor-2 (HER2) and estrogen receptor (ER). Finally, the opportunities and challenges of developing efficient biosensors in breast cancer diagnosis and treatment are discussed.

Recent Advances and Biomedical Applications of Peptide-Integrated Conducting Polymers

Conducting polymers (CPs) are of great interests to researchers around the world in biomedical applications owing to their unique electrical and mechanical properties. Besides, they are easy to fabricate and have long-term stability. These features make CPs a powerful building block of modern biomaterials. Peptide functionalization has been a versatile tool for the development of CP-based biomaterials. With the aid of peptide modifications, the biocompatibility, target selectivity, and cellular interactions of CPs can be greatly improved. Reflecting these aspects, an increasing number of studies on peptide-integrated conducting polymers have been reported recently. In this review, various kinds of peptide immobilization strategies on CPs are introduced. Moreover, the aims of peptide modification are discussed in three aspects: enhancing the specific selectivity, avoiding nonspecific adhesion, and mimicking the environment of extracellular matrix. We highlighted recent studies in the applications of peptide-integrated CPs in electrochemical sensors, antifouling surfaces, and conductive biointerfaces. These studies have shown great potentials from the integration of peptide and CPs as a versatile platform for advanced biological and clinical applications in the near future.

Antifouling Electrochemical Biosensor Based on the Designed Functional Peptide and the Electrodeposited Conducting Polymer for CTC Analysis in Human Blood

Circulating tumor cells (CTCs) are considered reliable cancer biomarkers for the liquid biopsy of many types of tumors. The direct detection of CTCs in human blood with normal biosensors, however, remains challenging because of severe biofouling in blood that contains various proteins and a large number of cells. Herein, we report the construction of an antifouling electrochemical biosensor capable of assaying CTCs directly in blood, based on a designed multifunctional peptide and the electrodeposited conducting polymer poly(3,4-ethylenedioxythiophene) (PEDOT). The designed peptide possesses antifouling capability in complex biological media and specific recognition ability to capture breast cancer cells MCF-7. Meanwhile, electrodeposited PEDOT can promote electron transfer at the sensing interface, improve the signal-to-noise ratio for the detection, and thus enhance the sensitivity of the biosensor. The integration of the multifunctional peptide and conducting polymer PEDOT ensures that the developed biosensor is able to perform directly in blood samples without purification or separation. The antifouling electrochemical biosensor for the detection of MCF-7 cells exhibits a wide linear range over 4 orders, with a limit of detection (LOD) of 17 cells mL^-1. More interestingly, even when performing in 25% human blood, the biosensor still retains a linear response with an LOD of 22 cells mL^-1, without suffering significantly from biofouling in real blood. This work provides a promising strategy for the direct analysis of CTCs in human blood without a complicated pretreatment, and it may find practical application in the liquid biopsy of cancers.

Electrochemical Biosensor with Enhanced Antifouling Capability Based on Amyloid-like Bovine Serum Albumin and a Conducting Polymer for Ultrasensitive Detection of Proteins in Human Serum

Biofouling has been a substantial burden on biomarker analysis in complex biological media, leading to poor sensitivity and selectivity or even malfunction of the sensing devices. In this work, an electrochemical biosensor with excellent antifouling ability and high stability was fabricated based on amyloid-like bovine serum albumin (AL-BSA) crosslinked with the conducting polymer polyaniline (PANI). Compared with the crosslinked conventional bovine serum albumin (BSA), the crosslinked AL-BSA exhibited enhanced antifouling capability, and it was able to form an effective antifouling film within a significantly short reaction time. With further immobilization of immunoglobulin M (IgM) antibodies onto the prepared AL-BSA surface via the formation of amide bonds, an electrochemical biosensor capable of assaying IgM in human serum samples with superior selectivity and sensitivity was constructed. The biosensor exhibited excellent antifouling performance even in 100% human serum, a low limit of detection down to 2.32 pg mL^-1, and acceptable accuracy for real sample analysis compared with the standard enzyme-linked immunosorbent assay for IgM detection. This strategy of using AL-BSA to construct antifouling sensing interfaces provided a reliable diagnostic method for the detection of a series of protein biomarkers in complex biological media.

Antifouling Aptasensor Based on Self-Assembled Loop-Closed Peptides with Enhanced Stability for CA125 Assay in Complex Biofluids

A brief and universal ultralow fouling sensing platform capable of assaying targets in complex biofluids was developed based on designed antifouling peptides that could form a loop-closed structure with enhanced stability. The newly designed peptide with thiol groups in its two terminals self-assembled onto a gold nanoparticle (AuNP)-modified electrode surface to form a stable loop structure, which displayed excellent antifouling performance, outstanding stability under enzymatic hydrolysis, and satisfactory long-term antifouling capability in complex biofluids (clinical human serum). The antifouling and highly sensitive electrochemical aptasensor was constructed via one-step co-immobilization of the designed peptides and aptamers onto the electrode surface modified with electrodeposited poly(3,4-ethylenedioxythiophene) (PEDOT) and AuNPs. The developed peptide-based aptasensor exhibited a decent response for the analysis of the cancer antigen 125 (CA125), with a relatively wide linear range (0.1-1000 U mL^-1) and a low limit of detection (0.027 U mL^-1), and was capable of detecting CA125 in clinical serum samples with acceptable accuracy. This antifouling strategy-based self-assembled peptide with a loop-closed structure provided a potential path for the development of various low-fouling biosensors for application in complex biological fluids.

Enabling Multiplexed Electrochemical Detection of Biomarkers with High Sensitivity in Complex Biological Samples

The ability to perform multiplexed detection of various biomarkers within complex biological fluids in a robust, rapid, sensitive, and cost-effective manner could transform clinical diagnostics and enable personalized healthcare. Electrochemical (EC) sensor technology has been explored as a way to address this challenge because it does not require optical instrumentation and it is readily compatible with both integrated circuit and microfluidic technologies; yet this approach has had little impact as a viable commercial bioanalytical tool to date. The most critical limitation hindering their clinical application is the fact that EC sensors undergo rapid biofouling when exposed to complex biological samples (e.g., blood, plasma, saliva, urine), leading to the loss of sensitivity and selectivity. Thus, to break through this barrier, we must solve this biofouling problem.In response to this challenge, our group has developed a rapid, robust, and low-cost nanocomposite-based antifouling coating for multiplexed EC sensors that enables unprecedented performance in terms of biomarker signal detection compared to reported literature. The bioinspired antifouling coating that we developed is a nanoporous composite that contains various conductive nanomaterials, including gold nanowires (AuNWs), carbon nanotubes (CNTs), or reduced graphene oxide nanoflakes (rGOx). Each study has progressively evolved this technology to provide increasing performance while simplifying process flow, reducing time, and decreasing cost. For example, after successfully developing a semipermeable nanocomposite coating containing AuNWs cross-linked to bovine serum albumin (BSA) using glutaraldehyde, we replaced the nanomaterials with reduced graphene oxide, reducing the cost by 100-fold while maintaining similar signal transduction and antifouling properties. We, subsequently, developed a localized heat-induced coating method that significantly improved the efficiency of the drop-casting coating process and occurs within the unprecedented time of <1 min (at least 3 orders of magnitude faster than state-of-the-art). Moreover, the resulting coated electrodes can be stored at room temperature for at least 5 months and still maintain full sensitivity and specificity. Importantly, this improved coating showed excellent antifouling activity against various biological fluids, including plasma, serum, whole blood, urine, and saliva.To enable affinity-based sensing of multiple biomarkers simultaneously, we have developed multiplexed EC sensors coated with the improved nanocomposite coating and then employed a sandwich enzyme-linked immunosorbent assay (ELISA) format for signal detection in which the substrate for the enzyme bound to the secondary antibody precipitates locally at the molecular binding site above the electrode surface. Using this improved EC sensor platform, we demonstrated ultrasensitive detection of a wide range of biomarkers from biological fluids, including clinical biomarkers, in both single and multiplex formats (N = 4) with assay times of 37 and 15 min when integrated with a microfluidic system. These biosensors developed demonstrate the vast potential of solving the biofouling problem, and how it can enable potential clinically important diagnostic applications. This Account reviews our antifouling surface chemistry and the multiplexed EC sensor-based biodetection method we developed and places it in context of the various innovative contributions that have been made by other researchers in this field. We are optimistic that future iterations of these systems will change the way diagnostic testing is done, and where it can be carried out, in the future.

Development strategies of conducting polymer-based electrochemical biosensors for virus biomarkers: Potential for rapid COVID-19 detection

Rapid, accurate, portable, and large-scale diagnostic technologies for the detection of severe acute respiratory syndrome-coronavirus-2 (SARS-CoV-2) are crucial for controlling the coronavirus disease (COVID-19). The current standard technologies, i.e., reverse-transcription polymerase chain reaction, serological assays, and computed tomography (CT) exhibit practical limitations and challenges in case of massive and rapid testing. Biosensors, particularly electrochemical conducting polymer (CP)-based biosensors, are considered as potential alternatives owing to their large advantages such as high selectivity and sensitivity, rapid detection, low cost, simplicity, flexibility, long self-life, and ease of use. Therefore, CP-based biosensors can serve as multisensors, mobile biosensors, and wearable biosensors, facilitating the development of point-of-care (POC) systems and home-use biosensors for COVID-19 detection. However, the application of these biosensors for COVID-19 entails several challenges related to their degradation, low crystallinity, charge transport properties, and weak interaction with biomarkers. To overcome these problems, this study provides scientific evidence for the potential applications of CP-based electrochemical biosensors in COVID-19 detection based on their applications for the detection of various biomarkers such as DNA/RNA, proteins, whole viruses, and antigens. We then propose promising strategies for the development of CP-based electrochemical biosensors for COVID-19 detection.

The impact of antifouling layers in fabricating bioactive surfaces

Bioactive surfaces modified with functional peptides are critical for both fundamental research and practical application of implant materials and tissue repair. However, when bioactive molecules are tethered on biomaterial surfaces, their functions can be compromised due to unwanted fouling (mainly nonspecific protein adsorption and cell adhesion). In recent years, researchers have continuously studied antifouling strategies to obtain low background noise and effectively present the function of bioactive molecules. In this review, we describe several commonly used antifouling strategies and analyzed their advantages and drawbacks. Among these strategies, antifouling molecules are widely used to construct the antifouling layer of various bioactive surfaces. Subsequently, we summarize various structures of antifouling molecules and their surface grafting methods and characteristics. Application of these functionalized surfaces in microarray, biosensors, and implants are also introduced. Finally, we discuss the primary challenges associated with antifouling layers in fabricating bioactive surfaces and provide prospects for the future development of this field. STATEMENT OF SIGNIFICANCE: The nonspecific protein adsorption and cell adhesion will cause unwanted background "noise" on the surface of biological materials and detecting devices and compromise the performance of functional molecules and, therefore, impair the performance of materials and the sensitivity of devices. In addition, the selection of antifouling surfaces with proper chain length and high grafting density is also of great importance and requires further studies. Otherwise, the surface-tethered bioactive molecules may not function in their optimal status or even fail to display their functions. Based on these two critical issues, we summarize antifouling molecules with different structures, variable grafting methods, and diverse applications in biomaterials and biomedical devices reported in literature. Overall, we expect to shed some light on choosing the appropriate antifouling molecules in fabricating bioactive surfaces.

Antifouling biosensors for reliable protein quantification in serum based on designed all-in-one branched peptides

Antifouling electrochemical biosensors based on designed all-in-one branched peptides that combine anchoring, doping, antifouling and recognizing functions were constructed to support sensitive and reliable protein quantification in complex serum samples.

Electrochemical sensing interfaces based on hierarchically architectured zwitterionic peptides for ultralow fouling detection of alpha fetoprotein in serum

Herein, an electrochemical sensing platform based on zwitterionic peptide with a hierarchical structure was constructed for ultralow fouling and highly sensitive protein quantification. Through the combination of CPPPPEKEKEKEK and CPPPPEKEKEK peptides, hierarchical antifouling peptide brushes were formed and exhibited excellent antifouling property, which can be further modified with alpha fetoprotein (AFP) aptamer to achieve highly sensitive detection of AFP. The hierarchical peptide brush-based sensor system achieved an AFP quantification range from 1.0 fg mL^-1 to 1.0 ng mL^-1, with a very low limit of detection as low as 0.59 fg mL^-1. In addition, due to the superior antifouling property of the newly designed hierarchical peptide brushes, the electrochemical biosensor supported the quantification of AFP in solutions with a high concentration of nonspecific proteins without sacrifice in sensitivity. It is worth noting that the constructed antifouling biosensor ensured quantitative recruitment of AFP in clinical serum samples with acceptable accuracy when compared with the commonly used method in the hospital. The strategy of constructing sensing interfaces based on designed hierarchical peptide brushes provided an effective way to develop biosensors with both excellent antifouling capability and high sensitivity.

Voltamperometric Sensors and Biosensors Based on Carbon Nanomaterials Used for Detecting Caffeic Acid-A Review

Caffeic acid is one of the most important hydroxycinnamic acids found in various foods and plant products. It has multiple beneficial effects in the human body such as antioxidant, antibacterial, anti-inflammatory, and antineoplastic. Since overdoses of caffeic acid may have negative effects, the quality and quantity of this acid in foods, pharmaceuticals, food supplements, etc., needs to be accurately determined. The present paper analyzes the most representative scientific papers published mostly in the last 10 years which describe the development and characterization of voltamperometric sensors or biosensors based on carbon nanomaterials and/or enzyme commonly used for detecting caffeic acid and a series of methods which may improve the performance characteristics of such sensors.

Recent Advances of Conducting Polymers and Their Composites for Electrochemical Biosensing Applications

Conducting polymers (CPs) have been at the center of research owing to their metal-like electrochemical properties and polymer-like dispersion nature. CPs and their composites serve as ideal functional materials for diversified biomedical applications like drug delivery, tissue engineering, and diagnostics. There have also been numerous biosensing platforms based on polyaniline (PANI), polypyrrole (PPY), polythiophene (PTP), and their composites. Based on their unique properties and extensive use in biosensing matrices, updated information on novel CPs and their role is appealing. This review focuses on the properties and performance of biosensing matrices based on CPs reported in the last three years. The salient features of CPs like PANI, PPY, PTP, and their composites with nanoparticles, carbon materials, etc. are outlined along with respective examples. A description of mediator conjugated biosensor designs and enzymeless CPs based glucose sensing has also been included. The future research trends with required improvements to improve the analytical performance of CP-biosensing devices have also been addressed.