Novel chloramphenicol sensor based on aggregation-induced electrochemiluminescence and nanozyme amplification

Dual emitting aggregation-induced electrochemiluminescence from tetrastyrene derivative for chloramphenicol detection

Chloramphenicol (CAP) poses a threat to human health due to its toxicity and bioaccumulation, and it is very important to measure it accurately and sensitively. This work explored a host-guest recognition strategy to mediate dual aggregation-induced electrochemiluminescence (AIECL) of 1,1,2,2-tetrakis(4-(pyridin-4-yl) phenyl)-ethene (TPPE) for ratio detection of CAP, in which, cucurbit[8]uril (CB[8]) served as host to assemble guest TPPE. The resulting supramolecular complex CB[8]-TPPE exhibited excellent dual-AIECL-emission with signal strength approximately four times that of TPPE aggregates and black hole quencher-1 (BHQ1) could efficiently quench dual-AIECL signal. CB[8]-TPPE coupled dual-function quencher BHQ1 and high-efficiency DNA reactor to achieve ultra-sensitive detection of CAP, exhibiting a linearity range of 10 fmol·L-1-100 nmol·L-1 and limit of detection of 1.81 fmol·L-1. CB[8]-TPPE provides a novel way to improve the dual-emission of TPE derivatives and sets up a promising platform for CAP detection, demonstrating a good practical application potential.

Spontaneous aggregation-enhanced electrochemiluminescence via galvanic strategy

Researchers unremittingly strive to develop innovative luminophores to enhance intrinsic electrochemiluminescence (ECL) performance. However, the potential to harness facile strategies, such as manipulating the physical properties of luminophores while retaining functional chemical properties to fabricate cost-effective ECL complexes, remains underexplored. Herein, we reported a novel and efficient one-step galvanic technique to actualize aggregation-enhanced ECL (AEECL) of ruthenium complexes. It marked the first instance of the galvanic process being employed to synthesize aggregate luminophores through electrostatic attraction. The ECL intensity and efficiency of the prepared ruthenium complexes with AEECL properties surpassed traditional ruthenium complexes by 8.9 and 13.6 times, respectively, outperforming most reported luminophores. Remarkably, the target luminophore exhibited high stability across varied scan rates and temperatures. Furthermore, a binder-free and carbon paper-based AEECL analytical device for lidocaine detection was fabricated, achieving a satisfactory detection limit (0.34 nM) and selectivity. The convenient modulation strategy of aggregate structure, along with the transformative leap from insufficient ECL to AEECL, bring forth a new revenue in aggregate science. This research also promises a universally applicable and versatile protocol for future biological analysis and bioimaging applications.

Recent advances in metal oxide nanozyme-based optical biosensors for food safety assays

Metal oxide nanozymes are emerging as promising materials for food safety detection, offering several advantages over natural enzymes, including superior stability, cost-effectiveness, large-scale production capability, customisable functionality, design options, and ease of modification. Optical biosensors based on metal oxide nanozymes have significantly accelerated the advancement of analytical research, facilitating the rapid, effortless, efficient, and precise detection and characterisation of contaminants in food. However, few reviews have focused on the application of optical biosensors based on metal oxide nanozymes for food safety detection. In this review, the catalytic mechanisms of the catalase, oxidase, peroxidase, and superoxide dismutase activities of metal oxide nanozymes are characterized. Research developments in optical biosensors based on metal oxide nanozymes, including colorimetric, fluorescent, chemiluminescent, and surface-enhanced Raman scattering biosensors, are comprehensively summarized. The application of metal oxide nanozyme-based biosensors for the detection of nitrites, sulphites, metal ions, pesticides, antibiotics, antioxidants, foodborne pathogens, toxins, and other food contaminants has been highlighted. Furthermore, the challenges and future development prospects of metal oxide nanozymes for sensing applications are discussed. This review offers insights and inspiration for further investigations on optical biosensors based on metal oxide nanozymes for food safety detection.

Molecular imprinting-based Ru@SiO2-embedded covalent organic frameworks composite for electrochemiluminescence detection of cyanidin-3-O-glucoside

Cyanidin-3-O-glucoside (C3G), a natural antioxidant, plays multiple physiological or pathological roles in maintaining human health; thereby, designing advanced sensors to achieve specific recognition and high-sensitivity detection of C3G is significant. Herein, an imprinted-type electrochemiluminescence (ECL) sensing platform was developed using core-shell Ru@SiO2-CMIPs, which were prepared by covalent organic framework (COF)-based molecularly imprinted polymers (CMIPs) embedded in luminescent Ru@SiO2 cores. The C3G-imprinted COF shell not only helps generate a steady-enhanced ECL signal, but also enables specific recognition of C3G. When C3G is bound to Ru@SiO2-CMIPs with abundant imprinted cavities, resonance energy transfer (RET) behavior is triggered, resulting in a quenched ECL response. The constructed Ru@SiO2-CMIPs nanoprobes exhibit ultra-high sensitivity, absolute specificity, and an ultra-low detection limit (0.15 pg mL-1) for analyzing C3G in food matrices. This study provides a means to construct an efficient and reliable molecular imprinting-based ECL sensor for food analysis.

Sulfur vacancy defects mediated CdZnTeS@BC heterojunction: Artificial intelligence-assisted self-enhanced electrochemiluminescence molecularly imprinted sensing of CTC

Environmental pollution caused by tetracycline antibiotics is a major concern of global public health. Here, a novel and portable molecularly imprinted electrochemiluminescence (MIECL) sensor based on smartphones for highly sensitive detection of chlortetracycline (CTC) has been successfully established. The high-performance ECL emitter of biomass carbon (BC) encapsulated CdZnTeS (CdZnTeS@BC) was successfully synthesized by hydrothermal. The enhanced ECL performance was ascribed to the introduction of the BC and increased the overall electrical conductivity of the nanoemitter, as well as increased the number of sulfur vacancies and doping on the surface of the emitter based on density functional theory calculations. An aniline-CTC molecular imprinted polymer was synthesized on the surface of the CdZnTeS@BC modified electrode by in-situ electropolymerization. The decrease in MIECL signal was attributed to the increase in impedance effect. The MIECL nanoplatform enabled a wide linear relationship in the range of 0.05-100 μmol/L with a detection limit of 0.029 μmol/L for spectrometer sensors. Interestingly, the light emitted during the MIECL reaction can be captured by a smartphone. Thus, machine learning was used to screen the photos that were taken, and color analysis was carried out on the screened photos by self-developed software, thus achieving a portable, convenient, and intelligent sensing mode. Finally, the sensor obtains satisfactory results in the detection of actual samples, with no significant differences from those of liquid chromatography.

Introducing molecular imprinting onto nanozymes: toward selective catalytic analysis

The discovery of enzyme-like catalytic characteristics in nanomaterials triggers the generation of nanozymes and their multifarious applications. As a class of artificial mimetic enzymes, nanozymes are widely recognized to have better stability and lower cost than natural bio-enzymes, but the lack of catalytic specificity hinders their wider use. To solve the problem, several potential strategies are explored, among which molecular imprinting attracts much attention because of its powerful capacity for creating specific binding cavities as biomimetic receptors. Attractively, introducing molecularly imprinted polymers (MIPs) onto nanozyme surfaces can make an impact on the latter's catalytic activity. As a result, in recent years, MIPs featuring universal fabrication, low cost, and good stability have been intensively integrated with nanozymes for biochemical detection. In this critical review, we first summarize the general fabrication of nanozyme@MIPs, followed by clarifying the potential effects of molecular imprinting on the catalytic performance of nanozymes in terms of selectivity and activity. Typical examples are emphatically discussed to highlight the latest progress of nanozyme@MIPs applied in catalytic analysis. In the end, personal viewpoints on the future directions of nanozyme@MIPs are presented, to provide a reference for studying the interactions between MIPs and nanozymes and attract more efforts to advance this promising area.

Co-based Nanozymatic Profiling: Advances Spanning Chemistry, Biomedical, and Environmental Sciences

Nanozymes, next-generation enzyme-mimicking nanomaterials, have entered an era of rational design; among them, Co-based nanozymes have emerged as captivating players over times. Co-based nanozymes have been developed and have garnered significant attention over the past five years. Their extraordinary properties, including regulatable enzymatic activity, stability, and multifunctionality stemming from magnetic properties, photothermal conversion effects, cavitation effects, and relaxation efficiency, have made Co-based nanozymes a rising star. This review presents the first comprehensive profiling of the Co-based nanozymes in the chemistry, biology, and environmental sciences. The review begins by scrutinizing the various synthetic methods employed for Co-based nanozyme fabrication, such as template and sol-gel methods, highlighting their distinctive merits from a chemical standpoint. Furthermore, a detailed exploration of their wide-ranging applications in biosensing and biomedical therapeutics, as well as their contributions to environmental monitoring and remediation is provided. Notably, drawing inspiration from state-of-the-art techniques such as omics, a comprehensive analysis of Co-based nanozymes is undertaken, employing analogous statistical methodologies to provide valuable guidance. To conclude, a comprehensive outlook on the challenges and prospects for Co-based nanozymes is presented, spanning from microscopic physicochemical mechanisms to macroscopic clinical translational applications.

Chemical Sensors Based on Covalent Organic Frameworks

Covalent organic frameworks (COFs) are a type of crystalline porous polymer composed of light elements through strong covalent bonds. COFs have attracted considerable attention due to their unique designable structures and excellent material properties. Currently, COFs have shown outstanding potential in various fields, including gas storage, pollutant removal, catalysis, adsorption, optoelectronics, and their research in the sensing field is also increasingly flourishing. In this review, we focus on COF-based sensors. Firstly, we elucidate the fundamental principles of COF-based sensors. Then, we present the primary application areas of COF-based sensors and their recent advancements, encompassing gas, ions, organic compounds, and biomolecules sensing. Finally, we discuss the future trends and challenges faced by COF-based sensors, outlining their promising prospects in the field of sensing.

Nanozyme as detector and remediator to environmental pollutants: between current situation and future prospective

The term "nanozyme" refers to a nanomaterial possessing enzymatic capabilities, and in recent years, the field of nanozymes has experienced rapid advancement. Nanozymes offer distinct advantages over natural enzymes, including ease of production, cost-effectiveness, prolonged storage capabilities, and exceptional environmental stability. In this review, we provide a concise overview of various common applications of nanozymes, encompassing the detection and removal of pollutants such as pathogens, toxic ions, pesticides, phenols, organic contaminants, air pollution, and antibiotic residues. Furthermore, our focus is directed towards the potential challenges and future developments within the realm of nanozymes. The burgeoning applications of nanozymes in bioscience and technology have kindled significant interest in research in this domain, and it is anticipated that nanozymes will soon become a topic of explosive discussion.

Advances of Electrochemical and Electrochemiluminescent Sensors Based on Covalent Organic Frameworks

Covalent organic frameworks (COFs), a rapidly developing category of crystalline conjugated organic polymers, possess highly ordered structures, large specific surface areas, stable chemical properties, and tunable pore microenvironments. Since the first report of boroxine/boronate ester-linked COFs in 2005, COFs have rapidly gained popularity, showing important application prospects in various fields, such as sensing, catalysis, separation, and energy storage. Among them, COFs-based electrochemical (EC) sensors with upgraded analytical performance are arousing extensive interest. In this review, therefore, we summarize the basic properties and the general synthesis methods of COFs used in the field of electroanalytical chemistry, with special emphasis on their usages in the fabrication of chemical sensors, ions sensors, immunosensors, and aptasensors. Notably, the emerged COFs in the electrochemiluminescence (ECL) realm are thoroughly covered along with their preliminary applications. Additionally, final conclusions on state-of-the-art COFs are provided in terms of EC and ECL sensors, as well as challenges and prospects for extending and improving the research and applications of COFs in electroanalytical chemistry.

Complementary Homogeneous Electrochemical and Photothermal Dual-Modal Sensor for Highly Sensitive Detection of Organophosphorus Pesticides via Stimuli-Responsive COF/Methylene Blue@MnO2 Composite

Credible and on-site detection of organophosphorus pesticides (OPs) in complex matrixes is significant for food security and environmental monitoring. Herein, a novel COF/methylene blue@MnO2 (COF/MB@MnO2) composite featured abundant signal loading, a specific recognition unit, and robust oxidase-like activity was successfully prepared through facile assembly processes. The multifunctional composite acted as a homogeneous electrochemical and photothermal dual-mode sensing platform for OPs detection through stimuli-responsive regulation. Without the presence of OPs, the surface MnO2 coating could recognize thiocholine (TCh), originating from acetylcholinesterase (AChE)-catalyzed hydrolysis of acetylthiocholine (ATCh), and exhibited a distinctly amplified diffusion current due to the release of plentiful MB; while the residual MnO2 nanosheets could only catalyze less TMB into oxidized TMB (oxTMB) with a typical near-infrared (NIR) absorption, enabling NIR-driven photothermal assay with a low temperature using a portable thermometer. Based on the inhibitory effect of OPs on AChE activity and OP-regulated generation of TCh, chlorpyrifos as a model target can be accurately detected with a low limit of detection of 0.0632 and 0.108 ng/mL by complementary electrochemical and photothermal measurements, respectively. The present dual-mode sensor was demonstrated to be excellent for application to the reliable detection of OPs in complex environmental and food samples. This work can not only provide a complementary dual-mode method for convenient and on-site detection of OPs in different scenarios but also expand the application scope of the COF-based multifunctional composite in multimodal sensors.

Enhanced electrochemiluminescence imaging of single cell membrane proteins based on Co3O4 nanozyme catalysis

The development of enhanced strategies with excellent biocompatibility is critical for electrochemiluminescence (ECL) imaging of single cells. Here, we report an ECL imaging technique for a single cell membrane protein based on a Co3O4 nanozyme catalytic enhancement strategy. Due to the remarkable catalytic performance of Co3O4 nanozymes, H2O2 can be efficiently decomposed into reactive oxygen radicals, and the reaction with L012 was enhanced, resulting in stronger ECL emission. The anti-carcinoembryonic antigen (CEA) was coupled with nanozyme particles to construct a probe that specifically recognized the overexpressed CEA on the MCF-7 cell membrane. According to the locally enhanced visualized luminescence, the rapid ECL imaging of a single cell membrane protein was eventually realized. Accordingly, Co3O4 nanozymes with highly efficient activity will provide new insights into ECL imaging analysis of more biological small molecules and proteins.

Determination of chloramphenicol in food using nanomaterial-based electrochemical and optical sensors-A review

Chloramphenicol (CAP) is a widely used antibiotic for the treatment of sick animals owing to its potent action and low cost. However, the accumulation of CAP in the human body can cause irreversible aplastic anemia and hematopoietic toxicity. Accordingly, development of various analytical techniques for the rapid detection of CAP in animal products and the related processed foods is necessary. Among these analytical techniques, electrochemical and optical sensors offer many advantages for CAP detection, including high sensitivity, simple operation and fast analysis speed. In this review, we summarize recent application of carbon nanomaterials, metal nanoparticles, metal oxide nanoparticles and metal organic framework in the development of electrochemical and optical sensors for CAP detection (2010-2022). Based on the advantages and disadvantages of nanomaterials, electrochemical and optical sensors are summarized in this review. The preparation and synthesis of electrochemical and optical sensors and nanomaterials in the field of rapid detection are prospected.

A fluorescence-electrochemiluminescence dual-mode sensor based on a "switch" system for highly selective and sensitive K-ras gene detection

Herein, an fluorescence (FL)-electrochemiluminescence (ECL) dual-mode biosensor is constructed based on the dual-signal "turn-on" strategy of functionalized metal-organic frameworks nanosheets (RuMOFNSs)-tetraferrocene for K-ras gene detection, and the mechanism of bursting through front-line orbital theory is explained for the first time. Amino-functionalized tetraferrocene-labeled probe DNA molecules are linked to RuMOFNSs by covalent amide bonds, acting as FL and ECL intensity switches. The target DNA, complementary to the probe DNA, triggers cyclic amplification of the target by nucleic acid exonuclease III (Exo III), repelling tetraferrocene reporter groups away from RuMOFNSs and inhibiting the electron transfer process and photoinduced electron transfer (PET) effect. These phenomena induce a double turn-on of FL and ECL signals with a high signal-to-noise ratio. The developed FL-ECL dual-mode sensing platform provides sensitive detection of the K-ras gene with detection limits of 0.01 fM (the detection range is 1 fM to 1 nM) and 0.003 fM (the detection range is 0.01 fM to 10 pM), respectively. In addition, the proposed dual-mode sensor can be easily extended to detect other disease-related biomarkers by changing the specific target and probe base sequences, depicting potential applications in bioanalysis and early disease diagnosis.

A Highly Selective Electrochemical Sensor Based on Molecularly Imprinted Copolymer Functionalized with Arginine for the Detection of Chloramphenicol in Honey

Developing an efficient method for chloramphenicol (CAP) detection is of great significance for food safety. Arginine (Arg) was selected as a functional monomer. Benefiting from its excellent electrochemical performance, which is different from traditional functional monomers, it can be combined with CAP to form a highly selective molecularly imprinted polymer (MIP) material. It overcomes the shortcoming of poor MIP sensitivity faced by traditional functional monomers, and achieves high sensitivity detection without compounding other nanomaterials, greatly reducing the preparation difficulty and cost investment of the sensor. The possible binding sites between CAP and Arg molecules were calculated by molecular electrostatic potential (MEP). A low-cost, non-modified MIP electrochemical sensor was developed for the high-performance detection of CAP. The prepared sensor has a wide linear range from 1 × 10^-12 mol L^-1 to 5 × 10^-4 mol L^-1, achieves a very low concentration CAP detection, and the detection limit is 1.36 × 10^-13 mol L^-1. It also exhibits excellent selectivity, anti-interference, repeatability, and reproducibility. The detection of CAP in actual honey samples was achieved, which has important practical value in food safety.

Rapid and Sensitive Detection of Sulfamethizole Using a Reusable Molecularly Imprinted Electrochemical Sensor

Efficient methods for monitoring sulfonamides (SAs) in water and animal-source foods are of great importance to achieve environmental safety and protect human health. Here, we demonstrate a reusable and label-free electrochemical sensor for the rapid and sensitive detection of sulfamethizole based on an electropolymerized molecularly imprinted polymer (MIP) film as the recognition layer. To achieve effective recognition, monomer screening among four kinds of 3-substituted thiophenes was performed by computational simulation and subsequent experimental evaluation, and 3-thiopheneethanol was finally selected. MIP synthesis is very fast and green, and can be in situ fabricated on the transducer surface within 30 min in an aqueous solution. The preparation process of the MIP was characterized by electrochemical techniques. Various parameters affecting MIP fabrication and its recognition response were investigated in detail. Under optimized experimental conditions, good linearity in the range of 0.001-10 μM and a low determination limit of 0.18 nM were achieved for sulfamethizole. The sensor showed excellent selectivity, which can distinguish between structurally similar SAs. In addition, the sensor displayed good reusability and stability. Even after 7 days of storage, or being reused 7 times, higher than 90% of the initial determination signals were retained. The practical applicability of the sensor was also demonstrated in spiked water and milk samples at the nM determination level with satisfactory recoveries. Compared to relevant methods for SAs, this sensor is more convenient, rapid, economical, and eco-friendly, and had comparable or even higher sensitivity, which offered a simple and efficient method for SA detection.

Highly selective and sensitive determination of ceftriaxone sodium using nitrogen-rich carbon dots based on ratiometric fluorescence

Selective and sensitive determination of ceftriaxone sodium (CTR) trace residues is of great importance for food safety and environmental protection. Herein, a determination method based on ratiometric fluorescence and colorimetric method with nitrogen-rich carbon dots as fluorophore is reported. The functional surfaces of indole-derived carbon dots (I-CDs) containing nitrogen and carbon groups can be selectively bound to CTR by electrostatic forces, leading to a hindered conjugation system and deprotonation of the amine on the pyrrole ring, resulting in a distinct variety in fluorescence and absorption wavelength and intensity. With the addition of CTR, the fluorescence at 577 nm can be selectively quenched, accompanied by a new emission peak appeared at 507 nm. The limits of detection (LODs) were estimated to be 19.7 nM and 78.0 nM based on the ratiometric fluorescence method and colorimetric method, respectively. Finally, the in situ visual quantitative determination of CTR using this nanosensor was achieved by combining with the color recognizer of a smartphone, and the method was further validated by spike and recovery test in real water samples including milk, seawater, and tap water.

A carbon dot-based nanoscale covalent organic framework as a new emitter combined with a CRISPR/Cas12a-mediated electrochemiluminescence biosensor for ultrasensitive detection of bisphenol A

Exploring new highly efficient electrochemiluminescence (ECL) luminophores is a necessary condition for developing ultrasensitive ECL biosensors. Therefore, a luminescent carbon dot-based covalent organic framework (CD-COF) was prepared using aldehyde-based carbon dots (CDs) and 1,3,5-tris (4-aminophenyl) benzene (TPB). Because the CD-COF made the regular arrangement of CDs conducive to improving the ECL response, CD-COF had a higher ECL intensity and efficiency than CDs. What's more, the ECL intensity of the CD-COF/S₂O₈^2-/Bu₄N⁺ system was about 2.98, 7.50, and 28.08 times higher than those of the CD-COF/S₂O₈^2-, CDs/S₂O₈^2- and S₂O₈^2- systems, respectively. Considering the remarkable ECL performance, the CD-COF/S₂O₈^2-/Bu₄N⁺ system was employed combined with the CRISPR/Cas12a trans-cutting strategy to construct an "off-on" ECL biosensor for BPA detection. The proposed ECL biosensor exhibited excellent performance with a wide linear range from 1.0 × 10^-14 mol L^-1 to 1.0 × 10^-5 mol L^-1 with a low detection limit of 2.21 fM (S/N = 3) under the optimized conditions. The biosensor demonstrated that CD-COF can be used as an efficient ECL emitter, thus expanding the application field of COFs. In addition, the good stability and specificity of the biosensor enabled the rapid detection of BPA, which will provide valuable insights into promising ultrasensitive ECL biosensors.

Application of Nanozymes in Environmental Monitoring, Management, and Protection

Nanozymes are nanomaterials with enzyme-like activity, possessing the unique properties of nanomaterials and natural enzyme-like catalytic functions. Nanozymes are catalytically active, stable, tunable, recyclable, and versatile. Therefore, increasing attention has been paid in the fields of environmental science and life sciences. In this review, we focused on the most recent applications of nanozymes for environmental monitoring, environmental management, and environmental protection. We firstly introduce the tuning catalytic activity of nanozymes according to some crucial factors such as size and shape, composition and doping, and surface coating. Then, the application of nanozymes in environmental fields are introduced in detail. Nanozymes can not only be used to detect inorganic ions, molecules, organics, and foodborne pathogenic bacteria but are also involved in the degradation of phenolic compounds, dyes, and antibiotics. The capability of nanozymes was also reported for assisting air purification, constructing biofuel cells, and application in marine antibacterial fouling removal. Finally, the current challenges and future trends of nanozymes toward environmental fields are proposed and discussed.

Machine learning-assisted Te-CdS@Mn3O4 nano-enzyme induced self-enhanced molecularly imprinted ratiometric electrochemiluminescence sensor with smartphone for portable and visual monitoring of 2,4-D

Here, a novel and portable machine learning-assisted smartphone-based visual molecularly imprinted ratiometric electrochemiluminescence (MIRECL) sensing platform was constructed for highly selective sensitive detection of 2,4-Dichlorophenoxyacetic acid (2,4-D) for the first time. Te doped CdS-coated Mn₃O₄ (Te-CdS@Mn₃O₄) with catalase-like activity served as cathode-emitter, while luminol as anode luminophore accompanied H₂O₂ as co-reactant, and Te-CdS@Mn₃O₄ decorated molecularly imprinted polymers (MIPs) as recognition unit, respectively. Molecular models were constructed and MIP band and binding energies were calculated to elucidate the luminescence mechanism and select the best functional monomers. The peroxidase activity and the large specific surface area of Mn₃O₄ and the electrochemical effect can significantly improve the ECL intensity and analytical sensitivity of Te-CdS@Mn₃O₄. 2,4-D-MIPs were fabricated by in-situ electrochemical polymerization, and the rebinding of 2,4-D inhibits the binding of H₂O₂ to the anode emitter, and with the increase of the cathode impedance, the ECL response of Te-CdS@Mn₃O₄ decreases significantly. However, the blocked reaction of luminol on the anode surface also reduces the ECL response. Thus, a double-reduced MIRECL sensing system was designed and exhibited remarkable performance in sensitivity and selectivity due to the specific recognition of MIPs and the inherent ratio correction effect. Wider linear range in the range of 1 nM-100 μM with a detection limit of 0.63 nM for 2,4-D detection. Interestingly, a portable and visual smartphone-based MIRECL analysis system was established based on the capture of luminescence images by smartphones, classification and recognition by convolutional neural networks, and color analysis by self-developed software. Therefore, the developed MIRECL sensor is suitable for integration with portable devices for intelligent, convenient, and fast detection of 2,4-D in real samples.

An electrochemiluminescence aptasensor based on highly luminescent silver-based MOF and biotin-streptavidin system for mercury ion detection

In this study, for the first time, a silver-based metal-organic framework (Ag-MOF) was synthesized and used as the electrochemiluminescence (ECL) emitter for building an ECL sensor. After modification with chitosan (CS) and gold nanoparticles (Au NPs), the ECL stability of Ag-MOF was improved. To detect mercury ions, a biosensor was constructed using the mercury ion aptamer and steric effect of streptavidin. First, the capture strand (cDNA) with terminal-modified sulfhydryl group was attached to the electrode surface by the Au-S bond. Then, the mercury-ion aptamer (Apt-Hg) modified with biotin was anchored to the electrode by complementary pairing with cDNA. Streptavidin (SA) could be fixed on the electrode by linking with biotin, thereby reducing the ECL signal. However, in the presence of mercury ions, the aptamer was removed and streptavidin could not be immobilized on the electrode. Hence, the ECL signal of the sensor increased with the concentration of mercury ions, which was linear in the range from 1 μM to 300 fM. The detection limit could reach 66 fM (S/N = 3). The sensor provided a new method for the detection of mercury ions.

Electrochemiluminescence nanoemitters for immunoassay of protein biomarkers

The family of electrochemiluminescent luminophores has witnessed quick development since the electrochemiluminescence (ECL) phenomenon of silicon nanoparticles was first reported in 2002. Moreover, these developed ECL nanoemitters have extensively been applied in sensitive detection of protein biomarker by combining with immunological recognition. This review firstly summarized the origin and development of various ECL nanoemitters including inorganic and organic nanomaterials, with an emphasis on metal-organic frameworks (MOFs)-based ECL nanoemitters. Several effective strategies to amplify the ECL response of nanoemitters and improve the sensitivity of immunosensing were discussed. The application of ECL nanoemitters in immunoassay of protein biomarkers for diagnosis of cancers and other diseases, especially lung cancer and heart diseases, was comprehensively presented. The recent development of ECL imaging with the nanoemitters as ECL tags for detection of multiplex protein biomarkers on single cell membrane also attracted attention. Finally, the future opportunities and challenges in the ECL biosensing field were highlighted.

A Sensitive Electrochemiluminescence Urea Sensor for Dynamic Monitoring of Urea Transport in Living Cells

A multiple signal-amplified electrochemiluminescence (ECL) urea sensor was designed based on a self-enhanced probe and SiO₂ photonic crystals for dynamic tracking of urea transmembrane transport. The self-enhanced probe (AuNR@Ru-LA) prepared by loading polyethyleneimine (PEI), lactobionic acid (LA), and Ru(dcbpy)₃²⁺ on gold nanorods (AuNRs) generated an initial ECL signal, and then the intensity was multiple-amplified by the enhanced light-scattering effect of SiO₂ photonic crystals and the co-reaction with urea. The as-prepared sensor exhibited excellent performance for the detection of urea in the range of 1.0 × 10^-10 to 1.0 × 10^-4 M with a detection limit of 8.8 × 10^-11 M at (3σ)/S. The AuNR@Ru-LA probes were labeled on HepG2 cells to construct a cytosensor with a detection range of 1.0 × 10³ to 2.0 × 10⁶ cells mL^-1. In addition, the dynamic changes of the extracellular urea concentration were tracked by monitoring the ECL signal of the cytosensor to study urea transmembrane transport. The developed strategy realized the amplification of multiple ECL signals and the tracking of urea transmembrane transport, which provided a novel dynamic detection method for small biomolecules.

A graphene-oxide-based aptasensor for fluorometric determination of chloramphenicol in milk and honey samples utilizing exonuclease III-assisted target recycling and Nb.BbvCI-powered DNA walker cascade amplification

Herein, a graphene oxide (GO)-based fluorescence aptasensor was developed for the sensitive and selective detection of chloramphenicol (CAP), based on exonuclease III (Exo III)-assisted target recycling and Nb.BbvCI-driven DNA walker cascade amplification. Interactions between CAP, hairpin1(HP1), hairpin2 (HP2), and 3'-amino modified hairpin3 (HP3) labeled with carboxyfluorescein (FAM) and covalently coupled to GO enabled efficient CAP detection. CAP was quantitatively assayed by measuring fluorescence at excitation/emission wavelengths of 480/514 nm, resulting from the accumulation of released FAM. A good linear range of 1 fM to 1 nM and a limit of detection (LOD) of 0.875 fM (signal-to-noise (S/N)= 3) were achieved. This aptasensor can distinguish the CAP from interference antibiotics with good specificity and selectivity, even if the concentration of the interfering substance is ten-fold higher than the target concentration. Moreover, the developed fluorescence aptasensor was successfully applied for the detection of CAP in spiked milk and honey samples. Thus, this method is potentially applicable for assaying CAP in foods and provides a promising strategy for the development of fluorescence aptasensors for environmental sample analysis.

Determination Methods of the Risk Factors in Food Based on Nanozymes: A Review

Food safety issues caused by foodborne pathogens, chemical pollutants, and heavy metals have aroused widespread concern because they are closely related to human health. Nanozyme-based biosensors have excellent characteristics such as high sensitivity, selectivity, and cost-effectiveness and have been used to detect the risk factors in foods. In this work, the common detection methods for pathogenic microorganisms, toxins, heavy metals, pesticide residues, veterinary drugs, and illegal additives are firstly reviewed. Then, the principles and applications of immunosensors based on various nanozymes are reviewed and explained. Applying nanozymes to the detection of pathogenic bacteria holds great potential for real-time evaluation and detection protocols for food risk factors.

Photoelectrochemical biosensor based on DNA aptamers and dual nano-semiconductor heterojunctions for accurate and selective sensing of chloramphenicol

Nanosheets of anatase TiO₂ and CdS quantum dots modified with thioglycolic acid (TGA-CdS QDs) were prepared and hierarchically modified on the indium tin oxides (ITO) electrodes. The heterojunction structure is formed to improve the light capture ability and carrier migration, significantly enhancing the sensitivity of photoelectrochemical (PEC) biosensors. Specific DNA sequences labeled with TGA-CdS QDs were placed on the electrodes to prepare a biosensor for the detection of chloramphenicol with ultrahigh selectivity. In addition, the heterojunction structure and the principle of photocurrent signal amplification on the electrode are described in detail. Under the optimal conditions, the photoelectrochemical biosensors showed good reproducibility and stability for chloramphenicol with a linear response in the range 10-10,000 pM and a limit of detection (LOD) of 0.23 pM. Due to the specific recognition of base pairs, the sensor has excellent anti-interference ability in practical applications. An effective method was developed for the accurate detection of antibiotics with far reaching prospects.

Nanozyme-encoded luminescent detection for food safety analysis: An overview of mechanisms and recent applications

With the rapid growth in global food production, delivery, and consumption, reformative food analytical techniques are required to satisfy the monitoring requirements of speed and high sensitivity. Nanozyme-encoded luminescent detections (NLDs) integrating nanozyme-based rapid detections with luminescent output signals have emerged as powerful methods for food safety monitoring, not only because of their preeminent performance in analysis, such as rapid, facile, low background signal, and ultrasensitive, but also due to their strong attractiveness for future sensing research. However, the lack of a full understanding of the fundamentals of NLDs for food safety detection technologies limits their further application. In this review, a systematic overview of the mechanisms of NLDs and their applications in the food industry is summarized, which covers the nanozyme-mimicking types and their luminescent signal generation mechanisms, as well as their applications in monitoring common foodborne contaminants. As demonstrated by previous studies, NLDs are bridging the gap to practical-oriented food analytical technologies and various opportunities to improve their food analytical performance to be considered in the future are proposed.

Highly Sensitive Determination of Antibiotic Residues in Aquatic Products by High-Performance Liquid Chromatography-Tandem Mass Spectrometry

Antibiotic drug residues are crucial to ensure food safety and minimize risk to human health. Herein, a sensitive high-performance liquid chromatography−tandem mass spectrometry (HPLC−MS/MS) method was developed and validated for the determination of antibiotic residues (mainly amphenicols) consisting of chloramphenicol (CAP), thiamphenicol (TAP), florfenicol (FF), and florfenicol amine (FFA) in aquatic products. Amphenicols were well separated on a Kinetex F5 (100 mm × 3.0 mm, 2.6 µm) chromatographic column with the mobile phases of 1 mM ammonium acetate aqueous solution and methanol solution and measured after positive and negative electrospray ionizations using four internal standards. To our knowledge, it was the first time to report the good performance of F5 column and four internal standards for the determination of amphenicols. The established method featured a good linear relationship between chromatographic peak area ratios and the concentrations of amphenicols (R2 > 0.992), a wide and low detection matrix-based range of 0.01−5 μg/L, a low detection limit of 0.01 μg/kg, etc. The spiked assays evidenced the accuracy and reliability of the developed method with the recoveries between 84.0 and 105%, the intraday relative standard deviations (RSDs) over the range of 0.769−13.7%, and the interday RSDs over the range of 0.582−13.3%. Finally, the proposed method was applied to investigate amphenicol residues in various aquatic products, including fish, shrimp, crab, shellfish, and other aquatic species.

Self-coordinated nanozyme on Cu3BiS3 nanorods for high-performance aptasensing

A novel strategy is reported to access high-performance nanozymes via the self-coordination of ferrocyanides ([Fe(CN)₆]^4-) onto the surface of the Cu₃BiS₃ (CBS) nanorods. Notably, the in situ formed nanozymes had high catalytic activity, good stability, low cost, and easy mass production. The formed nanozyme catalyzed the oxidation of the typical chromogenic substrate of 3,3',5,5'-tetramethylbenzidine (TMB) with a distinctive absorption peak at 652 nm, accompanied by a blue color development. Moreover, the attachment of deoxyribonucleoside 5'-monophosphates (dNMP) beforehand onto the surface of CBS prevented coordination of ferrocyanides and resulted in the tunable formation of the nanozyme, thereby enabling the construction of an exquisite biosensing platform. Taking the aptasensing of chloramphenicol (CAP) as an example, the engineered nanozyme allowed the construction of a homogenous, label-free, and high-performance bioassay in terms of its convenience and high sensitivity. Under the optimal conditions, changes in the absorption intensity at 652 nm for the oxidized TMB provides a good linear correlation with the logarithm of CAP concentrations in the range 0.1 pM to 100 nM, and the limit of detection was 0.033 pM (calculated from 3σ/s). Considering a vast number of bioreactions can be connected to dNMP production, we expect the engineerable nanozyme as a universal signal transduction scaffold for versatile applications in bioassays. Through the attachment of deoxyribonucleoside 5'-monophosphate (dNMP) on the surface of CBS to regulate the generation of self-coordinated nanozyme CBS/BiHCF, a homogeneous, label-free, and high-performance universal aptasensing platform was constructed.

Recent Advances in Construction and Application of Metal-Nanozymes in Pharmaceutical Analysis

Nanozymes, made of emerging nanomaterials, have similar activity to natural enzyme and exhibit promising applications in in the fields of environment, biology and medicine, and food safety science. In recent years, with the deep finding and research to nanozymes by researchers, its application in field of pharmaceutical analysis has emerged gradually, possessing great significance in drug safety evaluation and quality control. This review summarizes the construction of metal nanozymes, strategies to improve their performance and their application in pharmaceutical detection and analysis, especially in detection of target analytes consisting of small molecule medicine macromolecule, toxic and others, which proposes theoretical foundation for development of nanozymes in this field. At the same time, it also provides opportunities and challenges for the construction and application of new nanozymes.

Electrochemiluminescence Systems for the Detection of Biomarkers: Strategical and Technological Advances

Electrochemiluminescence (ECL)-based sensing systems rely on light emissions from luminophores, which are generated by high-energy electron transfer reactions between electrogenerated species on an electrode. ECL systems have been widely used in the detection and monitoring of diverse, disease-related biomarkers due to their high selectivity and fast response times, as well as their spatial and temporal control of luminance, high controllability, and a wide detection range. This review focuses on the recent strategic and technological advances in ECL-based biomarker detection systems. We introduce several sensing systems for medical applications that are classified according to the reactions that drive ECL signal emissions. We also provide recent examples of sensing strategies and technologies based on factors that enhance sensitivity and multiplexing abilities as well as simplify sensing procedures. This review also discusses the potential strategies and technologies for the development of ECL systems with an enhanced detection ability.

Electrochemiluminescent sensor based on an aggregation-induced emission probe for bioanalytical detection

In recent years, with the rapid development of electrochemiluminescence (ECL) sensors, more luminophores have been designed to achieve high-throughput and reliable analysis. Impressively, after the proposed fantastic concept of "aggregation-induced electrochemiluminescence (AIECL)" by Cola, the application of AIECL emitters provides more abundant choices for the further improvement of ECL sensors. In this review, we briefly report the phenomenon, principle and representative applications of aggregation-induced emission (AIE) and AIECL emitters. Moreover, it is noteworthy that the cases of AIECL sensors for bioanalytical detection are summarized in detail, from 2017 to now. Finally, inspired by the applications of AIECL emitters, relevant prospects and challenges for AIECL sensors are proposed, which is of great significance for exploring more advanced bioanalytical detection technology.

Construction of an ECL Detection Platform for Sensitive Detection of Carbaryl Based on an Eu3+-Functionalized Metal–Organic Framework Encapsulated with Nanogold

In this work, an Eu3+-MOF-253@Au electrochemiluminescence sensor was successfully constructed for the first time by encapsulating nanogold in the metal–organic frameworks (MOFs) backbone and pore channels, and assembling Eu3+ on the MOF backbone. Firstly, the introduction of nanogold overcomes the weakness of MOFs, which was difficult to achieve, and enhances its catalytic performance, followed by the modification of Eu3+ to confer the electrochemiluminescence performance and the function of target detection on the sensor. Moreover, carbaryl was placed in an alkaline working solution to enhance the intensity of electrochemiluminescence signal, as well as to promote the hydrolysis of carbaryl into 1-naphthol, which caused the burst of Eu3+-MOF-253@Au electrochemiluminescence sensor, thereby achieving the sensitive detection of carbaryl. On this basis, the electrochemiluminescence detection conditions were optimized, the performance was analyzed, and finally it was successfully used for the detection of carbaryl with good linearity in the range of 0.2–200 μg L−1 and a low detection limit (0.14 μg L−1).

A flexible and bright surface-enhanced electrochemiluminescence film constructed from efficient aggregation-induced emission luminogens for biomolecular sensing

A bright surface-enhanced electrochemiluminescence film (SEEF) was fabricated from an organic luminogen with aggregation-induced emission (AIEgen) features on flexible substrates. Flexible carbonous substrates including carbon fiber cloth (GCFC) and carbon fiber paper (GCFP) were decorated with gold nanoparticles (AuNPs) through electrochemical deposition methods, followed by facilely casting AIEgen solutions. The resulting SEEF had a low driving potential of +0.84 V, and its electrochemiluminescence (ECL) was readily observed by the naked eye. The systematic investigation showed that the bright ECL was associated with the promoted electrochemical oxidation and radiative decay of excited AIEgens enhanced by AuNP deposition. Intriguingly, the ECL intensity of the film was linearly enhanced by increasing AIEgen loadings, which allowed tuning of ECL brightness on demand. Moreover, the SEEF was flexible and immune to folding. The ECL intensity rarely changed even when consecutively folding the film 20 times due to the strong interaction between the AIEgen and substrate. The SEEF was further used to sense biomolecules in aqueous media. The ECL of the film was linearly quenched in the presence of dopamine (DA) in the range of 10^-15-10^-6 M with a record-low limit of detection of 3.16 × 10^-16 M. Furthermore, a simple method based on grayscale analysis of ECL images (GAEI) was used for visual sensing of DA. This work provides a kind of novel bright ECL film, useful for the ultrasensitive monitoring of biomolecules in aqueous media.

Self-electrochemiluminescence biosensor based on CRISPR/Cas12a and PdCuBP@luminol nanoemitter for highly sensitive detection of cytochrome c oxidase subunit III gene of acute kidney injury

The cytochrome c oxidase subunit III (COX III) gene is a powerful biomarker for the early diagnosis of acute kidney injury. However, current methods for COX III gene detection are usually laborious and time-consuming, with limited sensitivity. Herein, we report a novel self-electrochemiluminescence (ECL) biosensor for highly sensitive detection of the COX III gene based on CRISPR/Cas12a and nanoemitters of luminol-loaded multicomponent metal-metalloid PdCuBP alloy mesoporous nanoclusters. The nanoemitter with excellent self-ECL in neutral media exhibited a high specific surface area for binding luminol and outstanding oxidase-like catalytic activity toward dissolved O₂. Meanwhile, the CRISPR/Cas12a system, as a target-trigger, was employed to specifically recognize the COX III gene and efficiently cleave the interfacial quencher of dopamine-labeled hairpin DNA. As a result, the ECL biosensor showed superior analytical performance for COX III gene detection without exogenous coreactant. Benefiting from the high-efficiency ECL emission of the nanoemitter and Cas12a-mediated interfacial cleavage of the quencher, the developed ECL biosensor exhibited high sensitivity to COX III with a low detection limit of 0.18 pM. The established ECL biosensing method possessed excellent practical performance in urine samples. Meaningfully, the proposed strategy presents promising prospects for nucleic acid detection in the field of clinical diagnostics.

Chloramphenicol-activated electro-chemiluminescent behavior of BNQDs-Ru(phen)32+ system for ultra-sensitive sensing of chloramphenicol in pharmaceutical and milk samples

To improve the sensitivity for electro-chemiluminescent (ECL) detection of chloramphenicol (CAP), a common broad-spectrum antibiotic, boron nitride quantum dots (BNQDs) were prepared with excellent photoelectric property and low toxicity. After its structure and electrochemical property were investigated in detail, it was noted that the ECL signal of Ru(Phen)₃²⁺could be strengthened by the proposed BNQDs, which was further activated by ten's times in the presence of CAP. Under the optimized conditions, there was an excellent linear relationship between ΔECL and lgc_CAPin a wide linear range from 1.0 × 10^-10to 1.0 × 10^-6mol l^-1CAP. The detection limit was super-low to be 3.3 × 10^-11mol l^-1(S/N = 3). When applied for CAP detection in real pharmaceutical and food samples, the recoveries were between 97.8% and 105.7% with R.S.D. less than 3.3%. A possible CAP-activated ECL mechanism of BNQDs-Ru(phen)₃²⁺was also proposed. This work will offer a great potential for efficient monitoring of CAP pollution and clinical diagnosing of CAP-related diseases in future.

Conductive Covalent Organic Frameworks with Conductivity- and Pre-Reduction-Enhanced Electrochemiluminescence for Ultrasensitive Biosensor Construction

Covalent organic frameworks (COFs) have attracted widespread attention in the electrochemiluminescence (ECL) field owing to their high load capacity of ECL luminophores and porous structures, but their ECL performance is still limited by the intrinsic poor conductivity (generally <10^-8 S m^-1). To address this shortcoming, we used 2,3,6,7,10,11-hexaaminotriphenylene (HATP) and 2,3,6,7,10,11-hexahydroxytriphenylene (HHTP) to synthesize a conductive COF (HHTP-HATP-COF, conductivity = 3.11 × 10^-4 S m^-1). Compared with HATP, HHTP, and low-conductive HHTP-DABZ-COF, HHTP-HATP-COF exhibited superior ECL performance, not only because HHTP-HATP-COF possessed massive ECL luminophores but also because its conductive porous framework accelerated charge transport in the whole framework and improved the utilization ratio of ECL luminophores. More interestingly, the ECL intensity of the HHTP-HATP-COF/S₂O₈^2- system was further improved after pre-reduction electrolysis due to the accumulation of HHTP-HATP-COF cation radicals. The experimental results showed that the ECL intensity of the HHTP-HATP-COF/S₂O₈^2- system after pre-reduction was about 1.64-, 3.96-, 6.88-, and 8.09-fold higher than those of HHTP-HATP-COF/S₂O₈^2-, HHTP-DABZ-COF/S₂O₈^2-, HHTP/S₂O₈^2-, and HATP/S₂O₈^2- systems, respectively. Considering the superior ECL property of the HHTP-HATP-COF/S₂O₈^2- system after pre-reduction, it was used as a high-efficient ECL beacon together with an aptamer/protein proximity binding-induced three-dimensional bipedal DNA walker to construct an ultrasensitive biosensor for thrombin detection, which displayed broad linearity (100 aM to 1 nM) with a detection limit of 62.1 aM. Overall, the work offered effective ways to increase ECL performance by the enhancement of conductivity and by the pre-reduction, proposing new ideas to design high-efficiency COF-based ECL materials and endowing conductive COFs with ECL biosensor application for the first time.

A Label-Free Immunosensor Based on Gold Nanoparticles/Thionine for Sensitive Detection of PAT Protein in Genetically Modified Crops

Genetically modified (GM) crops containing phosphinothricin acetyltransferase (PAT) protein has been widely planted worldwide. The development of a rapid method for detecting PAT protein is of great importance to food supervision. In this study, a simple label-free electrochemical immunosensor for the ultrasensitive detection of PAT protein was constructed using thionine (Thi)/gold nanoparticles (AuNPs) as signal amplification molecules and electrochemically active substances. Under optimum conditions, the limits of detection of the sensor for soybean A2704-12 and maize BT-176 were 0.02% and 0.03%, respectively. The sensor could detect crops containing PAT protein and had no cross-reaction with other proteins. After storage at 4°C for 33 days, the sensor still retained 82.5% of the original signal, with a relative standard deviation (RSD) of 0.92%. The recoveries of the sensor for soybean A2704-12 and maize BT-176 were 85%-108% and 98%-113%, respectively. The developed PAT-target immunosensor with high sensitivity, specificity, and satisfactory reproducibility and accuracy will be a useful tool in the trace screening of GM crops. Moreover, this design concept can be extended to other proteins by simply changing the antibody.

Covalent Organic Frameworks as Advanced Uranyl Electrochemiluminescence Monitoring Platforms

Electrochemiluminescence (ECL), as an advanced sensing process, can selectively control the generation of excited states by changing the potential. However, most of the existing ECL systems rely on poisonous coreactants to provide radicals for luminescence; although the ECL efficiency was improved, the athematic coreactants will cause unpredictable interference to the accurate analysis of trace targets. Herein, we realized the ECL of nonemitting molecules by performing intramolecular electron transfer in the olefin-linked covalent organic frameworks (COFs), with a high efficiency of 63.7%. Employing internal dissolved oxygen as the coreactant, it is well suitable for the analysis of various complex samples in the environment. Taking nuclear contamination analysis as the goal orientation, we further illustrated a design of a "turn-on" uranyl ion monitoring system integrating fast response, low detection limit, and high selectivity, showing that new ECL-COFs are promising to facilitate environment-related sensing analysis and structure-feature correlation mechanism exploration.

Aggregation-induced delayed fluorescence luminogens: the innovation of purely organic emitters for aqueous electrochemiluminescence

Due to overcoming the limitation of aggregation caused quenching (ACQ) of solid-state emitters, aggregation-induced emission (AIE) organic luminogens have become a promising candidate in aqueous electrochemiluminescence (ECL). However, restricted by the physical nature of fluorescence, current organic AIE luminogen-based ECL (AIECL) faces the bottleneck of low ECL efficiency. Here, we propose to construct de novo aqueous ECL based on aggregation-induced delayed fluorescence (AIDF) luminogens, called AIDF-ECL. Compared with the previous organic AIE luminogens, purely organic AIDF luminogens integrate the superiorities of both AIE and the utilization of dark triplets via thermal-activated spin up-conversion properties, thereby possessing the capability of close-to-unity exciton utilization for ECL. The results show that the ECL characteristics using AIDF luminogens are directly related to their AIDF properties. Compared with an AIECL control sample based on a tetraphenylethylene AIE moiety, the ECL efficiency of our AIDF-ECL model system is improved by 5.4 times, confirming the excellent effectiveness of this innovative strategy.