A CRISPR-Cas12a-powered magnetic relaxation switching biosensor for the sensitive detection of Salmonella

A CRISPR/Cas12a-based direct transverse relaxation time biosensor via hydrogel sol-gel transition for Salmonella detection

This research developed a magnetic relaxation switching (MRS) biosensor based on hydrogel sol-gel transition and the CRISPR/Cas12a system (MRS-CRISPR) to detect Salmonella. Herein, the alkaline phosphatase (ALP) labeled with streptavidin was captured by the biotin-modified DNA on magnetic nanoparticles (MNPs) surface, which generated an acidic environment via enzymatic reaction to release Ca2+ and induced the transformation of alginate sol to hydrogels. In contrast, Salmonella activated the trans-cleavage activity of the CRISPR/Cas12a system, interrupting the capture of ALP and the subsequent sol-gel transition. Then, transverse relaxation time (T2), which was regulated by the hydrogelation process was measured for Salmonella detection. The MRS-CRISPR biosensor enables sensitive detection of Salmonella with a detection limit of 158 CFU/mL. It directly alters the state of water molecules, overcoming the disadvantages of traditional MRS sensors that rely on MNPs to produce T2 signals indirectly. This method offers innovative insights for the application of the MRS technology in food safety analysis.

Enhanced CRISPR/Cas12a Fluorimetry via a DNAzyme-Embedded Framework Nucleic Acid Substrate

CRISPR/Cas12a fluorimetry has been extensively developed in the biosensing arena, on account of its high selectivity, simplicity, and rapidness. However, typical CRISPR/Cas12a fluorimetry suffers from low sensitivity due to the limited trans-cleavage efficiency of Cas12a, necessitating the integration of other preamplification techniques. Herein, we develop an enhanced CRISPR/Cas12a fluorimetry via a DNAzyme-embedded framework nucleic acid (FNAzyme) substrate, which was designed by embedding four CLICK-17 DNAzymes into a rigid tetrahedral scaffold. FNAzyme can not only enhance the trans-cleavage efficiency of CRISPR/Cas12a by facilitating the exposure of trans-substrate to Cas12a but also result in an exceptionally high signal-to-noise ratio by mediating enzymatic click reaction. Combined with a functional nucleic acid recognition module, this method can profile methicillin-resistant Staphylococcus aureus as low as 18 CFU/mL, whose sensitivity is approximately 54-fold higher than that of TaqMan probe-mediated CRISPR/Cas12a fluorimetry. Meanwhile, the method exhibited satisfactory recoveries in food matrices ranging from 80% to 101%. The DNA extraction- and preamplification-free detection format as well as the potent detection performance highlight its tremendous potential as a next-generation analysis tool.

An LF-NMR homogeneous sensor for highly sensitive and precise detection of E. coli based on target-triggered CuAAC click reaction

In this study, a low field nuclear magnetic resonance (LF-NMR) homogeneous sensor was constructed for detection of Escherichia coli (E. coli) based on the copper metabolism of E. coli triggered click reaction. When live E. coli was present, a large amount of Cu2+ ions were transformed into Cu+ via copper metabolism, which then catalyzed a Cu+-catalyzed azide-alkyne cycloaddition (CuAAC) reaction between two materials, azide group modified gadolinium oxide nanorods (Gd2O3-Az) and PA-GO@Fe3O4 i.e., graphene oxide (GO) loaded with large amounts of alkynyl (PA) groups and Fe3O4 nanoparticles simultaneously. After magnetic separation, unbound Gd2O3-Az was dissolved by added hydrochloric acid (HCl) to generate homogeneous Gd3+ solution, enabling homogeneous detection of E. coli. Triple signal amplification was achieved through the CuAAC reaction induced by E. coli copper metabolism, functional nanomaterials, and HCl assisted homogeneous detection. Under the optimal experimental conditions, the linear range and limit of detection (LOD) for E. coli were 10-1.0 × 107 CFU/mL and 3.5 CFU/mL, respectively, and the relative standard deviations (RSDs) were all less than 2.8 %. In addition, the sensor has satisfactory selectivity, stability and practical sample application capability, providing a new approach for the LF-NMR detection of food-borne pathogenic bacteria.

Sensitive and Enzyme-Free Pseudomonas aeruginosa Detection and Isolation via DNAzyme Cascade Triggered DNA Tweezer

Effective isolation and sensitive detection of Pseudomonas aeruginosa (P. aeruginosa) is crucial for the early diagnosis and prognosis of various diseases, such as urinary tract infections. However, efficient isolation and simultaneous detection of P. aeruginosa remains a huge challenge. Herein, we depict a novel fluorescence assay for sensitive, enzyme-free detection of P. aeruginosa by integrating DNAzyme cascade-induced DNA tweezers and magnetic nanoparticles (MNPs)-based separation. The capture probe@MNPs is capable of accurately identifying target bacteria and transporting the bacteria signal to nucleic acid signals. Based on the DNAzyme cascade-induced DNA tweezers, the nucleic acid signals are extensively amplified, endowing the method with a high sensitivity and a low detection limit of 1 cfu/mL. In addition, the method also exhibits a wide detection of six orders of magnitudes. The proposed method could be extended to other bacteria detection by simply changing the aptamer sequence. Taking the merit of the high sensitivity, greatly minimized detection time (less than 1.5 h), enzyme-free characteristics, and stability, the proposed method could be potentially applied to diagnosing and preventing diseases caused by pathogenic bacteria.

CRISPR/Cas12a and Hybridization Chain Reaction-Coregulated Magnetic Relaxation Switching Biosensor for Sensitive Detection of Viable Salmonella in Animal-Derived Foods

We combined a CRISPR/Cas12a system with a hybridization chain reaction (HCR) to develop an ultrasensitive magnetic relaxation switching (MRS) biosensor for detecting viable Salmonella typhimurium (S. typhimurium). Magnetic nanoparticles of two sizes (30 and 1000 nm: MNP30 and MNP1000, respectively) were coupled through HCR. The S. typhimurium gene-activated CRISPR/Cas12a system released MNP30 from the MNP1000-HCR-MNP30 complex through a trans-cleavage reaction. After magnetic separation, released MNP30 was collected from the supernatant and served as a transverse relaxation time (T2) signal probe. Quantitative detection of S. typhimurium is achieved by establishing a linear relationship between the change in T2 and the target gene. The biosensor's limit of detection was 77 CFU/mL (LOD = 3S/M, S = 22.30, M = 0.87), and the linear range was 102-108 CFU/mL. The accuracy for detecting S. typhimurium in real samples is comparable to that of qPCR. Thus, this is a promising method for the rapid and effective detection of foodborne pathogens.

Accelerated proton dissociation in an excited state induces superacidic microenvironments around graphene quantum dots

Investigating proton transport at the interface in an excited state facilitates the mechanistic investigation and utilization of nanomaterials. However, there is a lack of suitable tools for in-situ and interfacial analysis. Here we addresses this gap by in-situ observing the proton transport of graphene quantum dots (GQDs) in an excited state through reduction of magnetic resonance relaxation time. Experimental results, utilizing 0.1 mT ultra-low-field nuclear magnetic resonance relaxometry compatible with a light source, reveal the light-induced proton dissociation and acidity of GQDs' microenvironment in the excited state (Hammett acidity function: -13.40). Theoretical calculations demonstrate significant acidity enhancement in -OH functionalized GQDs with light induction ( p K a *  = -4.62, stronger than that of H2SO4). Simulations highlight the contributions of edge and phenolic -OH groups to proton dissociation. The light-induced superacidic microenvironment of GQDs benefits functionalization and improves the catalytic performances of GQDs. Importantly, this work advances the understanding of interfacial properties of light-induced sp2-sp3 carbon nanostructure and provides a valuable tool for exploring catalyst interfaces in photocatalysis.

Breaking boundaries in microbiology: customizable nanoparticles transforming microbial detection

The detection and identification of microorganisms are crucial in microbiology laboratories. Traditionally, detecting and identifying microbes require extended periods of incubation, significant manual effort, skilled personnel, and advanced laboratory facilities. Recent progress in nanotechnology has provided novel opportunities for detecting and identifying bacteria, viruses, and microbial metabolites using customized nanoparticles. These improvements are thought to have the ability to surpass the constraints of existing procedures and make a substantial contribution to the development of rapid microbiological diagnosis. This review article examines the customizability of nanoparticles for detecting bacteria, viruses, and microbial metabolites and discusses recent cutting-edge studies demonstrating the use of nanotechnology in biomedical research.

Cu(II)-induced magnetic resonance tuning and enhanced magnetic relaxation switching immunosensor for sensitive detection of chlorpyrifos and Salmonella

Magnetic relaxation switching (MRS) biosensors have been recognized as useful analytical tools for a range of targets; however, traditional MRS biosensors are limited by the "prozone effect", resulting in a narrow linear range and low sensitivity. Herein, we proposed a paramagnetic Cu2+-induced magnetic resonance tuning (MRET) strategy, based on which Cu2+ ions and magnetic nanoparticles (MNPs) were adopted to construct a Cu-MNP-mediated MRS (Cu-M-MRS) immunosensor with Cu2+ ions acting as a quencher and MNPs as an enhancer. An Fe3O4@polydopamine-secondary antibody conjugate was prepared and used to correlate the amount of Cu2+ ions to the target concentration through an immunoassay. Based on the immunoreaction, the Cu-M-MRS immunosensor enabled the sensitive detection of chlorpyrifos (0.05 ng/mL, a 77-fold enhancement in sensitivity compared with the traditional MRS immunosensor) and Salmonella (50 CFU/mL). The proposed MRET strategy effectively improved the sensitivity and accuracy of the MRS immunosensor, offering a promising and versatile platform for food safety detection.

Colorimetric biosensor based on aptamer recognition-induced multi-DNA release and peroxidase-mimicking three-way junction DNA-Ag/PtNCs for the detection of Salmonella typhimurium

Salmonella typhimurium, as a major foodborne pathogen, poses a serious threat to public health safety worldwide. Here, we present a colorimetric biosensor based on aptamer recognition-induced multi-DNA release and peroxidase-mimicking three-way junction DNA-silver/platinum bimetallic nanoclusters (3WJ/DNA-Ag/PtNCs) for the detection of S. typhimurium. In this method, S. typhimurium specifically binds to the aptamer and releases multiple cDNAs to form the three-way junction DNA structure and synthesize silver/platinum bimetallic nanoclusters, which induces signaling changes. Interestingly and importantly, the use of 3WJ/DNA as the template for synthesizing Ag/PtNCs gives the method an extremely low background signal. Under the optimal conditions, the constructed biosensor had a linear response range of 2.6 × 102-2.6 × 106 CFU/mL and a detection limit of 2.6 × 102 CFU/mL for the detection of S. typhimurium. In addition, the proposed method can effectively detect S. typhimurium in milk.

A biphasic accelerated strand exchange amplification strategy for culture-independent and rapid detection of Salmonella enterica in food samples

Salmonella enterica is a common foodborne pathogen that can cause food poisoning in humans. The organism also infects and causes disease in animals. Rapid and sensitive detection of S. enterica is essential to prevent the spread of this pathogen. Traditional technologies for the extraction and detection of this pathogen from complex food matrices are cumbersome and time-consuming. In this study, we introduced a novel strategy of biphasic assay integrated with an accelerated strand exchange amplification (ASEA) method for efficient detection of S. enterica without culture or other extraction procedures. Food samples are rapidly dried, resulting in a physical fluidic network inside the dried food matrix, which allows polymerases and primers to access the target DNA and initiate ASEA. The dried food matrix is defined as the solid phase, while amplification products are enriched in the supernatant (liquid phase) and generate fluorescence signals. The analytical performances demonstrated that this strategy was able to specifically identify S. enterica and did not show any cross-reaction with other common foodborne pathogens. For artificially spiked food samples, the strategy can detect 5.0 × 101 CFU mL-1S. enterica in milk, 1.0 × 102 CFU g-1 in duck, scallop or lettuce, and 1.0 × 103 CFU g-1 in either oyster or cucumber samples without pre-enrichment of the target pathogen. We further validated the strategy using 82 real food samples, and this strategy showed 92% sensitivity. The entire detection process can be finished, sample-to-answer, within 50 min, dramatically decreasing the detection time. Therefore, we believe that the proposed method enables rapid and sensitive detection of S. enterica and holds great promise for the food safety industry.

CRISPR/Cas-based colorimetric biosensors: a promising tool for the diagnosis of bacterial foodborne pathogens in food products

Some physical phenomena and various chemical substances newly introduced in nanotechnology have allowed scientists to develop valuable devices in the field of food sciences. Regarding such progress, the identification of foodborne pathogenic microorganisms is an imperative subject nowadays. These bacterial species have been found to cause severe health impacts after food ingestion and can result in high mortality in acute cases. The rapid detection of foodborne bacterial species at low concentrations is in high demand in recent diagnostics. CRISPR/Cas-mediated biosensors possess the potential to overcome several challenges in classical assays such as complex pretreatments, long turnaround time, and insensitivity. Among them, colorimetric nanoprobes based on the CRISPR strategy afford promising devices for POCT (point-of-care testing) since they can be visualized with the naked eye and do not require diagnostic apparatus. In this study, we briefly classify and discuss the working principles of the different CRISPR/Cas protein agents that have been employed in biosensors so far. We assess the current status of the CRISPR system, specifically focusing on colorimetric biosensing platforms. We discuss the utilization of each Cas effector in the detection of foodborne pathogens and examine the restrictions of the existing technology. The challenges and future opportunities are also indicated and addressed.

Advancements in magnetic nanoparticle-based biosensors for point-of-care testing

The significance of point-of-care testing (POCT) in early clinical diagnosis and personalized patient care is increasingly recognized as a crucial tool in reducing disease outbreaks and improving patient survival rates. Within the realm of POCT, biosensors utilizing magnetic nanoparticles (MNPs) have emerged as a subject of substantial interest. This review aims to provide a comprehensive evaluation of the current landscape of POCT, emphasizing its growing significance within clinical practice. Subsequently, the current status of the combination of MNPs in the Biological detection has been presented. Furthermore, it delves into the specific domain of MNP-based biosensors, assessing their potential impact on POCT. By combining existing research and spotlighting pivotal discoveries, this review enhances our comprehension of the advancements and promising prospects offered by MNP-based biosensors in the context of POCT. It seeks to facilitate informed decision-making among healthcare professionals and researchers while also promoting further exploration in this promising field of study.

An Innovative and Efficient Fluorescent Detection Technique for Salmonella in Animal-Derived Foods Using the CRISPR/Cas12a-HCR System Combined with PCR/RAA

Here, we present a method for Salmonella detection using clustered regularly interspaced short palindromic repeats associated with the CRISPR-associated protein 12a-hybridization chain reaction (CRISPR/Cas12a-HCR) system combined with polymerase chain reaction/recombinase-assisted amplification (PCR/RAA) technology. The approach relies on the Salmonella invA gene as a biorecognition element and its amplification through PCR and RAA. In the presence of the target gene, Cas12a, guided by crRNA, recognizes and cleaves the amplification product, initiating the HCR. Fluorescently labeled single-stranded DNA (ssDNA) H1 and H2 were introduced, and the Salmonella concentration was determined based on the fluorescence intensity from the triggered HCR. Both assays demonstrate high specificity, sensitivity, simplicity, and rapidity. The detection range was 2 × 101-2 × 109 CFU/mL, with an LOD of 20 CFU/mL, and the entire process enabled specific and rapid Salmonella detection within 85-105 min. Field-incurred spiked recovery tests were conducted in mutton and beef samples using both assays, demonstrating satisfactory recovery and accuracy in animal-derived foods. By combining CRISPR/Cas12a with hybridization chain reaction technology, this study presents a rapid and sensitive Salmonella detection method that is crucial for identifying pathogenic bacteria and monitoring food safety.

An LF-NMR homogeneous immunoassay for Vibrio parahaemolyticus based on superparamagnetic 2D nanomaterials

In this work, a sensitive low field nuclear magnetic resonance (LF-NMR) homogeneous immunoassay, also called magnetic resonance switch (MRSw) sensor, for Vibrio parahaemolyticus (VP) was developed. Superparamagnetic 2D nanomaterial was designed and used as the magnetic probe of MRSw sensor. It was GO@SPIONs&Ab, a composite nanomaterial with many superparamagnetic Fe3O4 nanoparticles (SPIONs) providing a magnetic signal and VP antibody (Ab) specifically recognizing the target VP evenly distributed on the surface of GO. The presence of VP controllably changed the aggregation state of the probe, eliminating the uncertainty of MRSw sensor type, and thus then achieving a regular variation of transverse relaxation time T2 and ensuing quantitative detection of VP. Triple signal enhancement of the MRSw sensor was obtained due to the application of the designed 2D probe, by increasing the number of SPIONs, improving the magnetic intensity and susceptibility, and forming a synergistic effect. Under optimized experimental conditions, VP could be detected with satisfied sensitivity, selectivity, precision, accuracy, and stability, even in turbid real samples. LOQ for VP was 10 CFU/mL. This detection principle is widely applicable, providing an idea for the construction of highly sensitive MRSw sensors.

Fast proton transport enables the magnetic relaxation response of graphene quantum dots for monitoring the oxidative environment in vivo

A magnetic relaxation switch (MRS) that targets small molecules such as H2O2 is difficult to realize because of the small size of the targets, which cannot gather enough MRS probes to form aggregates and generate a difference in magnetic relaxation times. Therefore, the development of small molecule-targeted MRS is strongly dependent on changes in the interfacial structure of the probe, which modulates the proton transport behavior near the probe. Herein, functionalized graphene quantum dots (GQDs) consisting of GQDs with disulfide bonds, polyethylene glycol (PEG), and paramagnetic Gd3+ were used as the MRS probe to sense H2O2. The structure of GQDs changed after reacting with H2O2. The PEG assembled a tube for transmitting changes in GQDs via proton transport and thus enabled the magnetic relaxation response of the probe towards H2O2. Pentaethylene glycol was experimentally and theoretically proven to have the strongest ability to transport protons. Such a probe can be applied in the differentiation of healthy and senescent cells/tissues using in vitro fluorescent imaging and in vivo magnetic resonance imaging. This work provides a reliable solution for building a proton transport route, which not only enables the response of the MRS probe towards the targets but also demonstrates the design of carbon nanostructures with proton transport behaviors.

A CG@MXene nanocomposite-driven E-CRISPR biosensor for the rapid and sensitive detection of Salmonella Typhimurium in food

In this study, we developed a novel electrochemical biosensor based on CRISPR/Cas12a (E-CRISPR) for the rapid and sensitive detection of Salmonella Typhimurium (S. Typhimurium). The CRISPR/Cas12a system was applied to identify S. Typhimurium gene and induce signal changes in electrochemical measurement. The colloidal gold and MXene (CG@MXene) nanocomposites were synthesized and immobilized to improve the performance of the biosensor by decreasing the background noise. The formation process of CG@MXene was well characterized, and experiment conditions were fully optimized. Under the optimal conditions, the proposed E-CRISPR biosensor exhibited excellent sensitivity for S. Typhimurium, with a limit of detection (LOD) of 160 CFU/mL, and great specificity against other common foodborne pathogens. Furthermore, the feasibility of the E-CRISPR biosensor was evaluated by analyzing S. Typhimurium-spiked chicken samples, with a recovery rate ranging from 100.46% to 106.37%. In summary, this research proposed a novel E-CRISPR biosensor from a new perspective to detect S. Typhimurium which can be an alternative approach for bacterial detection in the food supply chain.

Multiple electromagnet synergistic control enabled fast and automatic biosensing of Salmonella in a sealed microfluidic chip

Point-of-care testing of pathogens is vital for prevention of food poisoning. Herein, a colorimetric biosensor was elaborately developed to rapidly and automatically detect Salmonella in a sealed microfluidic chip with one central chamber for housing immunomagnetic nanoparticles (IMNPs), bacterial sample and immune manganese dioxide nanoclusters (IMONCs), four functional chambers for housing absorbent pad, deionized water and H2O2-TMB substrate, and four symmetric peripheral chambers for achieving fluidic control. Four electromagnets were placed under peripheral chambers and synergistically controlled to manipulate their respective iron cylinders at the top of these chambers for deforming these chambers, resulting in precise fluidic control with designated flowrate, volume, direction and time. First, the electromagnets were automatically controlled to mix IMNPs, target bacteria and IMONCs, resulting in the formation of IMNP-bacteria-IMONC conjugates. Then, these conjugates were magnetically separated by a central electromagnet and the supernatant was directionally transferred to the absorbent pad. After these conjugates were washed by deionized water, the H2O2-TMB substrate was directionally transferred to resuspend the conjugates and catalyzed by the IMONCs with peroxidase-mimic activity. Finally, the catalysate was directionally transferred back to its initial chamber, and its color was analyzed by the smartphone APP to determinate bacterial concentration. This biosensor could detect Salmonella quantitatively and automatically in 30 min with a low detection limit of 101 CFU/mL. More importantly, the whole bacterial detection procedure from bacterial separation to result analysis was achieved on a sealed microfluidic chip through multiple electromagnet synergistic control, and this biosensor has great potential for point-of-care testing of pathogens without cross contaminations.

Enzymatic Catalysis in Size and Volume Dual-Confined Space of Integrated Nanochannel-Electrodes Chip for Enhanced Impedance Detection of Salmonella

Nanochannel-based confinement effect is a fascinating signal transduction strategy for high-performance sensing, but only size confinement is focused on while other confinement effects are unexplored. Here, a highly integrated nanochannel-electrodes chip (INEC) is created and a size/volume-dual-confinement enzyme catalysis model for rapid and sensitive bacteria detection is developed. The INEC, by directly sandwiching a nanochannel chip (60 µm in thickness) in nanoporous gold layers, creates a micro-droplet-based confinement electrochemical cell (CEC). The size confinement of nanochannel promotes the urease catalysis efficiency to generate more ions, while the volume confinement of CEC significantly enriches ions by restricting diffusion. As a result, the INEC-based dual-confinement effects benefit a synergetic enhancement of the catalytic signal. A 11-times ion-strength-based impedance response is obtained within just 1 min when compared to the relevant open system. Combining this novel nanoconfinement effects with nanofiltration of INEC, a separation/signal amplification-integrated sensing strategy is further developed for Salmonella typhimurium detection. The biosensor realizes facile, rapid (<20 min), and specific signal readout with a detection limit of 9 CFU mL-1 in culturing solution, superior to most reports. This work may create a new paradigm for studying nanoconfined processes and contribute a new signal transduction technique for trace analysis application.

"Lollipop" particle counting immunoassay based on antigen-powered CRISPR-Cas12a dual signal amplification for the sensitive detection of deoxynivalenol in the environment and food samples

Deoxynivalenol is one of the most widely distributed mycotoxins in cereals and poses tremendous threats to the agricultural environment and public health. Therefore, it is particularly important to develop sensitive and interference-resistant deoxynivalenol analysis methods. Here, we establish a "Lollipop" particle counting immunoassay (LPCI) based on antigen-powered CRISPR-Cas12a dual signal amplification. LPCI achieves high sensitivity and accuracy through antigen-powered CRISPR-Cas dual signal amplification combined with particle counting immunoassay. This strategy not only broadens the applicability of the CRISPR-Cas system in the field of non-nucleic acid target detection; it also improves the sensitivity of particle counting immunoassay. The introduction of a polystyrene "lollipop" immunoassay carrier further enables efficiently simultaneous pre-treatment of multiple samples and overcomes complex matrix interference in real samples. The linear detection range of LPCI for deoxynivalenol was 0.1-500 ng/mL with a detection limit of 0.061 ng/mL. The platform greatly broadens the scope of the CRISPR-Cas sensor for the detection of non-nucleic acid hazards in the environment and food samples.

Cartridge voltage-sensitive micropump immunosensor based on a self-assembled polydopamine coating mediated signal amplification strategy

Current biosensing detection assays were developed to focus on rapid, low-cost, stable detection for clinical diagnosis and food safety monitoring. In this work, a novel portable cartridge voltage-sensitive micropump immunosensor (CVMS) biosensing device based on the integration of the microchannel circuit biosensing principle and polydopamine (PDA) was presented for rapid and sensitive detection of pathogenic factors in real samples at trace levels. The CVMS can sensitively evaluate voltage signal changes caused by clogging effects in the closed-loop circuit when the insulated microspheres pass through the microchannel. The targets could trigger the immune reaction between antibody-antigens that leads to the change in the concentration of horseradish peroxidase (HRP). And the HRP was further employed to catalyze the polymerization of dopamine into PDA, resulting in the rapid formation of the magnetic @PDA nanoparticles (MNP@PDA) with core-shell structures. The abundant functional groups on the MNP@PDA surface can efficiently adsorb polystyrene microspheres, thus causing changes in the number of polystyrene microspheres (PS). The CVMS can accurately monitor the change of PS with a portable device, which weighs less than 0.8 kg and costs only $50. The completion of CVMS takes 90 min to complete. The limit of detection of this immunosensor for procalcitonin and ochratoxin A were 42 pg/mL and 77 pg/mL, respectively, which improved about 15 folds and 38 folds, respectively, than those of enzyme-linked immunosorbent assay.

Sensitive detection of viable salmonella bacteria based on tertiary cascade signal amplification via splintR ligase ligation-PCR amplification-CRISPR/Cas12a cleavage

Several viable Salmonella bacteria are capable of causing severe human diseases and huge economic losses. In this regard, viable Salmonella bacteria detection techniques that can identify small numbers of microbial cells are highly valuable. Here, we present a detection method (referred to as SPC) based on the amplification of tertiary signals using splintR ligase ligation, PCR amplification and CRISPR/Cas12a cleavage. The detection limit of the SPC assay was 6 copies (HilA RNA) and 10 CFU (cell). Based on Intracellular HilA RNA detection, this assay can be used to distinguish between viable and dead Salmonella. In addition, it is able to detect multiple serotypes of Salmonella and has been successfully used to detect Salmonella in milk or isolated from farms. Overall, this assay is a promising test for viable pathogens detection and biosafety control.

CRISPR/Cas12a-based magnetic relaxation switching biosensor for nucleic acid amplification-free and ultrasensitive detection of methicillin-resistant Staphylococcus aureus

Herein, we develop a CRISPR/Cas12a-based magnetic relaxation switching (C-MRS) biosensor for ultrasensitive and nucleic acid amplification-free detection of methicillin-resistant Staphylococcus aureus (MRSA) in food. In this biosensor, mecA gene in MRSA was recognized by CRISPR-RNA, which will activate the trans-cleavage activity of Cas12a and release the fastened alkaline phosphatase (ALP) on the particle. The freed ALP can then use to hydrolyze substrate to produce ascorbic acid that trigger the click reaction between magnetic probe. The transverse relaxation time of the unbound magnetic probe can be measured for signal readout. By incorporating collateral activity of CRISPR/Cas12a, on-particle rolling circle amplification, and ALP-triggered click chemistry into background-free MRS, as low as 16 CFU/mL MRSA can be detected without any nucleic acid pre-amplification, which avoids carryover contamination, but without compromising sensitivity. Moreover, this C-MRS biosensor could distinguish 0.01% target DNA from the single-base mutant. Recovery in eggs, milk and pork ranged from 75% to 112%, 82%-104%, and 81%-91%, respectively, revealing its satisfactory accuracy and applicability in the complex food matrix. The developed C-MRS biosensor fleshes out the CRISPR toolbox for food safety and provides a new approach for the sensitive and accurate detection of foodborne drug-resistant bacteria.

Contamination-free V-shaped ultrafast reaction cascade transferase signal amplification driven CRISPR/Cas12a magnetic relaxation switching biosensor for bacteria detection

Foodborne pathogenic bacteria seriously endanger human health and must be rapidly identified for control. Magnetic relaxation switching biosensors (MRS) are ideal for rapid bacteria detection due to their high signal-to-noise ratio and immunity to sample matrix signal interference. However, conventional MRS still has some challenges in terms of sensitivity, specificity, and stability due to insufficient cross-linking or non-specific binding of magnetic nanoparticles (MNPs) to the target. To address these challenges, we firstly proposed a novel contamination-free uracil-DNA glycosylase (UDG) assisted V-shaped PCR driven CRISPR/Cas12a-MRS (UPC-MRS) biosensor, which combines contamination-free ultrafast nucleic acid amplification and powerful CRISPR/Cas12a system. It has an extremely specific quadruple signal guarantee realized by the merits of UDG anti-contamination, PCR primer specificity matching, the CRISPR/Cas12a system's precise recognition abilities, and magnetic probe signal unaffected by the sample matrix. As a cascade combined with original terminal deoxynucleotidyl transferase (Tdt)-mediated signal amplification technology, this platform can achieve Salmonella detection at concentrations as low as 53 CFU/mL, which is more sensitive than most existing MRS sensors, and it displays accuracy and applicability in real sample detection. This novel UPC-MRS biosensors avoid the common aerosol pollution problem of previous CRISPR/Cas12a systems which after combining with nucleic acid amplification, hence not only offers an alternative toolbox for Salmonella and other pathogen detection with satisfactory specificity and sensitivity, but also has potential for future applications across diverse fields.

Advances, applications, and limitations of portable and rapid detection technologies for routinely encountered foodborne pathogens

Traditional foodborne pathogen detection methods are highly dependent on pre-treatment of samples and selective microbiological plating to reliably screen target microorganisms. Inherent limitations of conventional methods include longer turnaround time and high costs, use of bulky equipment, and the need for trained staff in centralized laboratory settings. Researchers have developed stable, reliable, sensitive, and selective, rapid foodborne pathogens detection assays to work around these limitations. Recent advances in rapid diagnostic technologies have shifted to on-site testing, which offers flexibility and ease-of-use, a significant improvement from traditional methods' rigid and cumbersome steps. This comprehensive review aims to thoroughly discuss the recent advances, applications, and limitations of portable and rapid biosensors for routinely encountered foodborne pathogens. It discusses the major differences between biosensing systems based on the molecular interactions of target analytes and biorecognition agents. Though detection limits and costs still need further improvement, reviewed technologies have high potential to assist the food industry in the on-site detection of biological hazards such as foodborne pathogens and toxins to maintain safe and healthy foods. Finally, this review offers targeted recommendations for future development and commercialization of diagnostic technologies specifically for emerging and re-emerging foodborne pathogens.

Application of the CRISPR/Cas System in Pathogen Detection: A Review

Early and rapid diagnosis of pathogens is important for the prevention and control of epidemic disease. The polymerase chain reaction (PCR) technique requires expensive instrument control, a special test site, complex solution treatment steps and professional operation, which can limit its application in practice. The pathogen detection method based on the clustered regularly interspaced short palindromic repeats (CRISPRs) and CRISPR-associated protein (CRISPR/Cas) system is characterized by strong specificity, high sensitivity and convenience for detection, which is more suitable for practical applications. This article first reviews the CRISPR/Cas system, and then introduces the application of the two types of systems represented by Type II (cas9), Type V (cas12a, cas12b, cas14a) and Type VI (cas13a) in pathogen detection. Finally, challenges and prospects are proposed.