Cost-effective and disposable label-free voltammetric immunosensor for sensitive detection of interleukin-6

Digital SERS immunoassay of Interleukin-6 based on Au@Ag-Au nanotags

Interleukin-6 (IL-6) is a crucial cytokine involved in inflammation and immune regulation. However, the detection of IL-6 with ultrasensitivity and high specificity remains a significant challenge due to the inherent complexity of biofluids. Herein, we present a digital surface enhanced Raman scattering (SERS) immunoassay using core-shell Au@Ag-Au nanotags for IL-6 detection with ultrasensitivity and high reliability. A low-cost silicon chip was functionalized as capture substrates, employing novel SERS nanotags that exhibit strong, robust and reproducible signals at single-nanoparticle resolution as the amplification element. We proposed two analytical methods to validate single-molecule events follow a Poisson distribution and to quantify protein biomarkers over a broad linear dynamic range, respectively. The strong alignment between theoretical and experimental results enhances the method's reliability. Our assay provides two readouts: colorimetric analysis by naked eyes for high concentrations (>1 ng/mL) and digital SERS analysis for low concentrations. Following method optimization, we obtained a linear range from 100 fg/mL to 1 ng/mL (R2 = 0.994) with a limit of detection (LOD) of 12.4 fg/mL, suitable for clinical applications. The method was tested for IL-6 quantification in healthy human serum and saliva, with recoveries from 92.4% to 105.3%. Finally, the immunoassay demonstrated strong consistency with the standard clinical laboratory method when tested with clinical serum samples. Thus, our proposed the digital SERS immunoassay is a promising tool for the precision clinical diagnosis of IL-6-related diseases or other conditions.

Electrochemical immunoplatform for the determination of multiple salivary biomarkers of oral diseases related to microbiome dysbiosis

Several diseases of the oral cavity are related to compositional and functional shifts in the oral microbiome. The analysis of saliva is an attractive alternative for the diagnosis and prognosis of these diseases. Samples can be obtained by no invasive procedures and processing is relatively simple. However, sensitive and selective analytical methods are needed to make the diagnosis as specific as possible. In this work, four salivary biomarkers of oral diseases: interleukin-6 (IL-6), receptor activator of NF-kB ligand (RANKL), protein arginine deiminase 4 (PAD4) and the corresponding antibody (anti-PAD-4) were selected as targets for their simultaneous determination using an electrochemical immunosensing platform. Sandwich-type amperometric immunoassays were implemented using horseradish peroxidase (HRP)/H2O2/hydroquinone (HQ) for application to the analysis of saliva of six volunteers. The developed method provides excellent sensitivity, selectivity, and wide linear ranges with LOD values of 0.09 pg mL-1 (IL-6), 0.10 pg mL-1 (RANKL); 0.09 ng mL-1(PAD4) and 14.5 ng mL-1 (anti-PAD4) and allows the accurate analysis of saliva without matrix effects, using 25 μL of raw sample. The developed methodology is competitive with commercial ELISA kits available only for a single biomarker determination, while the assay for the four biomarkers can be completed in less than two hours.

Therapeutic drug monitoring of methotrexate by disposable SPCE biosensor for personalized medicine

BACKGROUND

Methotrexate (MTX) is widely used in clinical practice for the treatment of malignant tumors and autoimmune diseases. High-dose MTX has been shown to be an effective approach for treating various malignant tumors, but it is accompanied by numerous toxic side effects, necessitating therapeutic drug monitoring (TDM) for patients and timely "folinic acid rescue." High-performance liquid chromatography and fluorescent immunoassay (FIA) are currently used to detect MTX, but these methods are limited by complex sample preparation, time consumption, and high cost. Therefore, a simple, rapid, and cost-effective MTX measurement method is required.

RESULTS

We developed a flexible and inexpensive electrochemical sensor using a stearyl trimethyl ammonium bromide (STAB)-modified, screen-printed carbon electrode to directly detect MTX in human serum. Assay performance was validated via detection of MTX in spiked buffer. The sensor was capable of measuring MTX concentrations ranging from 0.01 to 1 μM and 1-1500 μM, with a limit of detection of 3.1 nM and a limit of quantitation of 3.5 nM. For the samples simulating combined medication, the sensor exhibited outstanding selectivity, in cross-reactivity, with the maximum response value of interferents reaching only 3.49 %. Additionally, the sensor shows reliable repeatability with a relative standard deviation of 3.8 % and remarkable stability. Recovery in human serum validated the clinical utility of the sensor in point-of-care testing conditions. The sensor's applicability to personal medicine was confirmed by detecting MTX blood concentration in patients with different diseases. The results obtained by the sensor were compared with those obtained by the FIA technique, a method commonly used in hospitals, showing a high level of consistency between both methods.

SIGNIFICANCE

To meet the requirements of personalized medicine for MTX-patients, we developed a disposable biosensor with wide detection range from 0.01 to 1 μM and 1-1500 μM. Owing to the effective enrichment of STAB, the electrochemical response was sensitive, selective, stable, and rapid. As per the clinical test results, our sensor has shown a high level of consistency with the FIA method, indicating its potential to replace FIA as a cost-effective platform for MTX-TDM.

Prussian blue-doped CaCO3 nanoparticle-labeled secondary antibodies for electrochemical immunoassay of interleukin-6 with migraine patients

The sensitive and accurate identification of interleukin-6 (IL-6) in biological fluids is essential for assessing migraine due to its role in different physiological and pathological processes. In this study, we designed a simple and feasible electrochemical immunosensing method for the voltammetric measurement of IL-6. The electrochemical immunosensor was fabricated through covalent conjugation of anti-IL-6 capture antibodies on the glassy carbon electrode with a typical carbodiimide coupling method. Anti-IL-6 secondary antibodies were labeled on the surface of Prussian blue-doped CaCO3 nanoparticles (PBCaNP) via the epoxy-amino reaction. The assay was carried out with a sandwich-type immunoreaction. In the presence of target IL-6, the analyte was sandwiched between the capture antibody and detection antibody. Thereafter, the carried PBCaNP accompanying the secondary antibody could be detected by using square wave voltammetry (SWV). The voltammetric peak current was dependent on the concentration of target IL-6. Under optimum conditions, the electrochemical immunosensor exhibited good analytical properties, and allowed detection of IL-6 within a wide linear range from 0.1 to 1000 pg mL-1. The limit of detection was estimated to be 0.078 pg mL-1 of IL-6 at the 3sB criterion. An intermediate reproducibility of ≤10.59% was accomplished with batch-to-batch identification, and good anti-interference capacity against other biomolecules was achieved. Importantly, clinical human serum samples obtained from 15 migraine patients were analyzed with the developed electrochemical immunosensors, giving results well-matched with those obtained from the referenced enzyme-linked immunosorbent assay (ELISA) method.

A highly sensitive and selective label-free impedimetric immunosensor for the detection of interleukin-6 based on AuNPs@pDA@NiCo2S4@MoS2 nanocomposite

A highly sensitive and selective label-free impedimetric immunosensor based on AuNPs@pDA@NiCo2S4@MoS2 nanocomposite modified on the surface of a screen-printed electrode (SPE) was designed for the detection of interleukin-6 (IL-6). The distribution of NiCo2S4 nanoparticles on MoS2 nanosheets was able to prevent them from agglomerating. The polydopamine (pDA) layer was coated on the surface of NiCo2S4@MoS2 nanosheets by self-polymerization, which improved the stability and biocompatibility of the nanomaterial. The excellent reduction ability of pDA promoted the synthesis of gold nanoparticles (AuNPs), which increased the amount of antibody adsorption and the conductivity of the material. Finally, the antibody (Ab) of IL-6 was immobilized on the surface of AuNPs@pDA@NiCo2S4@MoS2 nanocomposite. Electrochemical impedance spectroscopy (EIS) was used to detect the change of impedance before and after the immune response between Ab and IL-6 antigen (IL-6). Under the optimal experimental conditions, the relative change in impedance and the logarithmic concentration of IL-6 showed a good linear relationship in the range 1.00 to 1.00 × 106 pg/mL, with a low detection limit of 0.97 pg/mL. In addition, the proposed immunosensor performed with good reproducibility, stability, and specificity. It was successfully applied to the determination of IL-6 in patient's serum samples of head and neck carcinoma with recoveries of 98.40% to 106.5%. To sum up, the proposed label-free impedimetric immunosensor was successfully constructed for IL-6 detection in real samples.

Effect of nanoarray density on enhanced electron transfer efficiency and analytical sensitivity for electrochemical immunosensors

The fabrication of ordered nanoarray electrode (NAE) using UV imprinting and their application as electrochemical (EC) immunosensor is described in this study. Especially, the influence of the array density factors on the performance of NAE was characterized electrochemically and compared with flat-electrode. Low-density (hole: 200 nm, hole space = 600 nm), medium-density (hole: 200 nm, hole space = 400 nm), and high-density NAE (hole: 200 nm, hole space = 200 nm) which have the same active area were fabricated and their redox cycling was compared with empirical results. We observed that the high-density is the optimum NAE exhibiting the lowest charge transfer resistance and the highest redox cycling performance among all NAEs. Finally, to observe the effect of their EC performance as biosensor, an EC immunoassay was performed using Interleukine-6 (IL-6), and high-density NAE has lowest a low limit of detection (LOD) of 0.45 pg/mL compared with other NAEs (medium-density: 3.91 pg/mL, low-density: 5.87 pg/mL).

An innovative label-free electrochemical aptamer sensor: utilizing Ti3C2Tx/MoS2/Au NPs for accurate interleukin-6 detection

In the medical field, changes in interleukin-6 (IL-6) concentration serve as essential biomarkers for monitoring and diagnosing various conditions, including acute inflammatory responses such as those seen in trauma and burns, and chronic illnesses like cancer. This paper detailed a label-free electrochemical aptamer sensor designed for IL-6 quantification. A composite material consisting of Ti3C2Tx and MoS2 was successfully synthesized to fabricate this sensor. The synergistic effect of MoS2's catalytic action on hydrogen peroxide (H2O2), used as a signalling marker, when combined with the exceptional conductivity and large specific surface area of Ti3C2Tx, not only enables an increased loading of MoS2 but also significantly boosts the electrochemical response. The in situ-reduced Au NPs provided stable immobilization sites for DNA aptamers (DNAapt) and facilitated electron transfer, ensuring accurate IL-6 recognition. Under optimal conditions, the aptamer sensor exhibited a wide linear range (5 pg/mL to 100 ng/mL) and a low limit of detection (LOD) of 2.9 pg/mL. Its sensing performance in human serum samples highlights its potential as a promising clinical analysis tool.

Au Nanoshell-Based Lateral Flow Immunoassay for Colorimetric and Photothermal Dual-Mode Detection of Interleukin-6

Interleukin-6 (IL-6) detection and monitoring are of great significance for evaluating the progression of many diseases and their therapeutic efficacy. Lateral flow immunoassay (LFIA) is one of the most promising point-of-care testing (POCT) methods, yet suffers from low sensitivity and poor quantitative ability, which greatly limits its application in IL-6 detection. Hence, in this work, we integrated Aushell nanoparticles (NPs) as new LFIA reporters and achieved the colorimetric and photothermal dual-mode detection of IL-6. Aushell NPs were conveniently prepared using a galvanic exchange process. By controlling the shell thickness, their localized surface plasmon resonance (LSPR) peak was easily tuned to near-infrared (NIR) range, which matched well with the NIR irradiation light. Thus, the Aushell NPs were endowed with good photothermal effect. Aushell NPs were then modified with IL-6 detection antibody to construct Aushell probes. In the LFIA detection, the Aushell probes were combined with IL-6, which were further captured by the capture IL-6 antibody on the test line of the strip, forming a colored band. By observation with naked eyes, the colorimetric qualitative detection of IL-6 was achieved with limit of 5 ng/mL. By measuring the temperature rise of the test line with a portable infrared thermal camera, the photothermal quantitative detection of IL-6 was performed from 1~1000 ng/mL. The photothermal detection limit reached 0.3 ng/mL, which was reduced by nearly 20 times compared with naked-eye detection. Therefore, this Aushell-based LFIA efficiently improved the sensitivity and quantitative ability of commercial colloidal gold LFIA. Furthermore, this method showed good specificity, and kept the advantages of convenience, speed, cost-effectiveness, and portability. Therefore, this Aushell-based LFIA exhibits practical application potential in IL-6 POCT detection.

An ethyl cellulose novel biodegradable flexible substrate material for sustainable screen-printing

We introduce an innovative solution to reduce plastic dependence in flexible electronics: a biodegradable, water-resistant, and flexible cellulose-based substrate for crafting electrochemical printed platforms. This sustainable material based on ethyl cellulose (EC) serves as an eco-friendly alternative to PET in screen printing, boasting superior water resistance compared to other biodegradable options. Our study evaluates the performance of carbon-based screen-printed electrodes (SPEs) fabricated on conventional PET, recycled PET (r-PET), and (EC)-based materials. Electrochemical characterization reveals that EC-SPEs exhibit comparable analytical performance to both P-SPEs and rP-SPEs, as evidenced by similar limits of detection (LOD), limits of quantification (LOQ), and reproducibility values for all the analytes tested (ferro-ferricyanide, hexaammineruthenium chloride, uric acid, and hydroquinone). This finding underscores the potential of our cellulose-based substrate to match the performance of conventional PET-based electrodes. Moreover, the scalability and low-energy requirements of our fabrication process highlight the potential of this material to revolutionize eco-conscious manufacturing. By offering a sustainable alternative without compromising performance, our cellulose-based substrate paves the way for greener practices in flexible electronics production.

Graphene Nanocomposite Ink Coated Laser Transformed Flexible Electrodes for Selective Dopamine Detection and Immunosensing

Novel and flexible disposable laser-induced graphene (LIG) sensors modified with graphene conductive inks have been developed for dopamine and interleukin-6 (IL-6) detection. The LIG sensors exhibit high reproducibility (relative standard deviation, RSD = 0.76%, N = 5) and stability (RSD = 4.39%, N = 15) after multiple bendings, making the sensors ideal for wearable and stretchable bioelectronics applications. We have developed electrode coatings based on graphene conductive inks, poly(3,4-ethylenedioxythiophene):polystyrene sulfonate (G-PEDOT:PSS) and polyaniline (G-PANI), for working electrode modification to improve the sensitivity and limit of detection (LOD). The selectivity of LIG sensors modified with the G-PANI ink is 41.47 times higher than that of the screen-printed electrode with the G-PANI ink modification. We have compared our fabricated bare laser-engraved Kapton sensor (LIG) with the LIG sensors modified with G-PEDOT (LIG/G-PEDOT) and G-PANI (LIG/G-PANI) conductive inks. We have further compared the performance of the fabricated electrodes with commercially available screen-printed electrodes (SPEs) and screen-printed electrodes modified with G-PEDOT:PSS (SPE/G-PEDOT:PSS) and G-PANI (SPE/G-PANI). SPE/G-PANI has a lower LOD of 0.632 μM compared to SPE/G-PEDOT:PSS (0.867 μM) and SPE/G-PANI (1.974 μM). The lowest LOD of the LIG/G-PANI sensor (0.4084 μM, S/N = 3) suggests that it can be a great alternative to measure dopamine levels in a physiological medium. Additionally, the LIG/G-PANI electrode has excellent LOD (2.6234 pg/mL) to detect IL-6. Also, the sensor is successfully able to detect ascorbic acid (AA), dopamine (DA), and uric acid (UA) in their ternary mixture. The differential pulse voltammetry (DPV) result shows peak potential separation of 229, 294, and 523 mV for AA-DA, DA-UA, and UA-AA, respectively.

A Novel Label-Free Electrochemical Immunosensor for the Detection of Thyroid Transcription Factor 1 Using Ribbon-like Tungsten Disulfide-Reduced Graphene Oxide Nanohybrids and Gold Nanoparticles

Thyroid transcription factor 1 (TTF1) is an important cancer-related biomarker for clinical diagnosis, especially for carcinomas of lung and thyroid origin. Herein, a novel label-free electrochemical immunosensor was prepared for TTF1 detection based on nanohybrids of ribbon-like tungsten disulfide-reduced graphene oxide (WS2-rGO) and gold nanoparticles (AuNPs). The proposed immunosensor employed H2O2 as the electrochemical probe because of the excellent peroxidase-like activity of ribbon-like WS2-rGO. The introduction of AuNPs not only enhanced the electrocatalytic activity of the immunosensor, but also provided immobilization sites for binding TTF1 antibodies. The electrochemical signals can be greatly amplified due to their excellent electrochemical performance, which realized the sensitive determination of TTF1 with a wide linear range of 0.025-50 ng mL-1 and a lower detection limit of 0.016 ng mL-1 (S/N = 3). Moreover, the immunosensor exhibited high selectivity, good reproducibility, and robust stability, as well as the ability to detect TTF1 in human serum with satisfactory results. These observed properties of the immunosensor enhance its potential practicability in clinical applications. This method can also be used for the detection of other tumor biomarkers by using the corresponding antigen-antibody complex.

A nanobody based ultrasensitive electrochemical biosensor for the detection of soluble CTLA-4 -A candidate biomarker for cancer development and progression

A soluble isoform of cytotoxic T-lymphocyte-associated antigen 4 (CTLA-4) has been found in the serum of healthy individuals and alterations in its expression level have been linked with the development and progression of various cancers. Conventionally, soluble CTLA-4 (sCTLA-4) has been quantified by techniques such as ELISA, western blot, and flow cytometry, which however are time-consuming, highly expensive and require large sample volumes. Therefore, rapid, cost-effective and real-time monitoring of soluble CTLA-4 levels is much needed to facilitate timely diagnosis of a worsening disease and help patient selection for immunotherapeutic interventions in cancer. Here, for the first time, we report an ultrasensitive, highly selective electrochemical nanobody (NAb) based biosensor for the quantitative detection of soluble CTLA-4 employing poly(3,4-ethylenedioxythiophene) polystyrene sulfonate (PEDOT:PSS) and gold nanoparticles modified electrode with attomole sensitivity. Incorporating nanomaterials with conductive polymers enhances the sensitivity of the electrochemical biosensor, while the nanobody's stability, specificity and ease of production make it a suitable choice as a bioreceptor. The proposed NAb-based sensor can detect sCTLA-4 from pure recombinant protein in a wide concentration range of 100 ag mL-1- 500 μg mL-1, with a limit of detection of 1.19 ag mL-1 (+3σ of the blank signal). The sensor's relative standard deviation for reproducibility is less than 0.4% and has effective real sample analytics for cell culture supernatant with no significant difference with pure recombinant protein (p < 0.05). Our proposed nanobody based sensor exhibits stability for up to 2 weeks (<3% variation). Moreover, this nanobody-based sensor presents a future opportunity for quantitative, ultrasensitive, and economical biosensor development that can be adapted to monitor the immune landscape of cancer patients to provide a larger therapeutic window.

Label-free electrochemical immunosensor as a reliable point-of-care device for the detection of Interleukin-6 in serum samples from patients with psoriasis

Interleukin-6 (IL-6) plays a crucial role in autoimmunity and chronic inflammation. This study aims to develop a low-cost, simple-to-manufacture, and user-friendly label-free electrochemical point-of-care device for the rapid detection of IL-6 in patients with psoriasis. Precisely, a sandwich-based format immunosensor was developed using two primary antibodies (mAb-IL6 clone-5 and clone-7) and screen-printed electrodes modified with an inexpensive recycling electrochemical enhancing material, called biochar. mAb-IL6 clone-5 was used as a covalently immobilized capture bioreceptor on modified electrodes, and mAb-IL6 clone-7 was used to recognize the immunocomplex (Anti-IL6 clone-5 and IL-6) and form the sandwich. Cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS) were used to conduct electrochemical characterization of the layer-by-layer assembly of the immunosensor, while square wave voltammetry (SWV) was used to perform the sensing. The developed immunosensor demonstrated robust analytical performance in buffer solution, with a wide linear range (LR) by varying from 2 to 250 pg/mL, a good limit of detection (LOD) of 0.78 pg/mL and reproducibility (RSD<7%). In addition, a spectrophotometric ELISA kit was employed to validate the results obtained with the label-free device by analyzing twenty-five serum samples from control and patients affected by psoriasis. A strong correlation in terms of pg/mL concentration of IL-6 was found comparing the two methods, with the advantage for our label-free biosensor of an ease use and a quicker detection time. Based on IL-6 levels, the proposed immunosensor is a dependable, non-invasive screening device capable of predicting disease onset, progression, and treatment efficacy.

Cascade signal amplification strategy by coupling chemical redox-cycling and Fenton-like reaction: Toward an ultrasensitive split-type fluorescent immunoassay

An ultrasensitive split-type fluorescent immunobiosensor has been reported based on a cascade signal amplification strategy by coupling chemical redox-cycling and Fenton-like reaction. In this strategy, Cu2+ could oxidize chemically o-phenylenediamine (OPD) to generate photosensitive 2, 3-diaminophenazine (DAP) and Cu+/Cu0. On one hand, the generated Cu0 in turn catalyzed the oxidation of OPD. On the other hand, the introduced H2O2 reacted with Cu + ion to produce hydroxyl radicals (·OH) and Cu2+ ion through a Cu + -mediated Fenton-like reaction. The produced ·OH and recycled Cu2+ ion could take turns oxidizing OPD to generate more photoactive DAP, which triggering a self-sustaining chemical redox-cycling reaction and leading to a remarkable fluorescent improvement. It was worth mentioning that the cascade reaction did not stop until OPD molecules were completely consumed. Based on the H2O2-triggered cascade signal amplification, the strategy was exploited for the construction of split-type fluorescent immunoassay by taking interleukin-6 (IL-6) as the model target. It was realized for the ultrasensitive determination of IL-6 in a linear ranging from 20 fg/mL to 10 pg/mL with a limit of detection of 5 fg/mL. The study validated the practicability of the cascade signal amplification on the fluorescent bioanalysis and the superior performance in fluorescent immunoassay. It is expected that the strategy would offer new opportunities to develop ultrasensitive fluorescent methods for biosensor and bioanalysis.

N-(4-Aminobutyl)-N-ethylisopropanol and Co2+ Dual-Functionalized Core-Shell Fe3O4@Au/Ag Magnetic Nanomaterials with Strong and Stable Chemiluminescence for a Label-Free Exosome Immunosensor

Recently, magnetic beads (MBs) are moving toward chemiluminescence (CL) functional magnetic nanomaterials with a great potential for constructing label-free immunosensors. However, most of the CL-functionalized MBs suffer from scarce binding sites, easy aggregation, and leakage of CL reagents, which will ultimately affect the analytical performance of immunosensors. Herein, by using core-shell Fe3O4@Au/Ag magnetic nanomaterials as a nanoplatform, a novel N-(4-aminobutyl)-N-ethylisopropanol (ABEI) and Co2+ dual-functionalized magnetic nanomaterial, namely, Fe3O4@Au/Ag/ABEI/Co2+, with strong and stable CL emission was successfully synthesized. Its CL intensity was 36 and 3.5 times higher than that of MB@ABEI-Au/Co2+ and ABEI and Co2+ dual-functionalized chemiluminescent MBs previously reported by our group, respectively. It was found that the excellent CL performance of Fe3O4@Au/Ag/ABEI/Co2+ could be attributed to the enrichment effect of the Au/Ag shell and the synergistic enhance effect of the Au/Ag shell and Co2+. A related CL mechanism has been proposed. Afterward, based on the intense and stable CL emission of Fe3O4@Au/Ag/ABEI/Co2+, a sensitive and effective label-free CL immunosensor for exosome detection was established. It exhibited excellent analytical performance with a wide detection range of 3.1 × 103 to 3.1 × 108 particles/mL and a low detection limit of 2.1 × 103 particles/mL, which were better than the vast majority of the reported CL immunosensors. Moreover, the proposed label-free CL immunosensor was successfully used to detect exosomes in human serum samples and enabled us to distinguish healthy persons and lung cancer patients. It has the potential to be a powerful tool for exosome study and early cancer diagnosis.

Toward the rapid diagnosis of sepsis: dendritic copper nanostructure functionalized diazonium salt modified screen-printed graphene electrode for IL-6 detection

Sepsis, an infectious disease affecting millions of people's health worldwide each year, calls for urgent attention to an improvement of analytical devices. Chemiluminescence immunoassay is a typical diagnostic method utilized to assess the risk development of sepsis. However, due to its high-cost, delayed, and complicated procedure, the practical utilization is therefore undoubtedly limited, especially for point-of-care test. Herein, we fabricated for the first time an immunosensor based on dendritic copper nanostructures (CuNSs) combined with 4-aminobenzoic acid (4-AB, the diazonium salt) as antibody linker modified on a screen-printed graphene electrode for the early detection of the sepsis biomarker interleukin-6 (IL-6). The electrode fabrication is made by electrodeposition, thus eliminating the multistep of nanomaterial synthesis and time wasting. The resulting dendritic CuNSs significantly increase the effective surface area (1.2 times) and the sensor's performance. The morphology of this combination was characterized using CV, EIS, SEM, EDX, and FTIR techniques. In the detection process, the appearance of IL-6 suppresses the current response of the redox probe indicator measured by differential pulse voltammetry due to the antibody-antigen complex. The subtraction of signal (ΔI) was interpreted as IL-6 concentration. This sensor exhibited a linear range from 0.05 to 500 pg mL-1 with low detection limit of 0.02 pg mL-1, proving a possibility for early sepsis screening. In addition, the established immunosensor can successfully quantify IL-6 in human serum sample, in which the results agreed well with those achieved using the standard approach, further showing high practical applicability of this developed immunosensor.

Design of a highly sensitive and versatile membrane-based immunosensor using a Cu-free click reaction

A highly sensitive immunosensor is developed using membrane pores as the recognition interface. In this sensor, a Cu-free click reaction is used to efficiently immobilize antibodies, and the sensor inhibits the adsorption of nonspecific proteins that degrade sensitivity. Furthermore, the sensor demonstrates rapid interleukin-6 detection in the picogram per milliliter range.

Comprehensive Analysis of Transcriptomics and Genetic Alterations Identifies Potential Mechanisms Underlying Anthracycline Therapy Resistance in Breast Cancer

Anthracycline is a mainstay of treatment for breast cancer patients because of its antitumor activity. However, anthracycline resistance is a critical barrier in treating breast cancer. Thus, it is of great importance to uncover the molecular mechanisms underlying anthracycline resistance in breast cancer. Herein, we integrated transcriptome data, genetic alterations data, and clinical data of The Cancer Genome Atlas (TCGA) to identify the molecular mechanisms involved in anthracycline resistance in breast cancer. Two hundred and four upregulated genes and 1376 downregulated genes were characterized between the anthracycline-sensitive and anthracycline-resistant groups. It was found that drug resistance-associated genes such as ABCB5, CYP1A1, and CYP4Z1 were significantly upregulated in the anthracycline-resistant group. The gene set enrichment analysis (GSEA) suggested that the P53 signaling pathway, DNA replication, cysteine, and methionine metabolism pathways were associated with anthracycline sensitivity. Somatic TP53 mutation was a common genetic abnormality observed in the anthracycline-sensitive group, while CDH1 mutation was presented in the anthracycline-resistant group. Immune infiltration patterns were extremely different between the anthracycline-sensitive and anthracycline-resistant groups. Immune-associated chemokines and cytokines, immune regulators, and human leukocyte antigen genes were significantly upregulated in the anthracycline-sensitive group. These results reveal potential molecular mechanisms associated with anthracycline resistance.