Microalgae biofuels: A critical review of issues, problems and the way forward

Microalgal extracellular polymeric substances (EPS) and their roles in cultivation, biomass harvesting, and bioproducts extraction

Microalgae extracellular polymeric substances (EPS) are complex high-molecular-weight polymers and the physicochemical properties of EPS strongly affect the core features of microalgae cultivation and resource utilization. Revealing the key roles of EPS in microalgae life-cycle processes in an interesting and novelty topic to achieve energy-efficient practical application of microalgae. This review found that EPS showed positive effect in non-gas uptake, extracellular electron transfer, toxicity resistance and heterotrophic symbiosis, but negative impact in gas transfer and light utilization during microalgae cultivation. For biomass harvesting, EPS favored biomass flocculation and large-size cell self-flocculation, but unfavored small size microalgae self-flocculation, membrane filtration, charge neutralization and biomass dewatering. During bioproducts extraction, EPS exhibited positive impact in extractant uptake, but the opposite effect in cellular membrane permeability and cell rupture. Future research on microalgal EPS were also identified, which offer suggestions for comprehensive understanding of microalgal EPS roles in various scenarios.

Utilizing CO2 in industrial off-gas for microalgae cultivation: considerations and solutions

The utilization of microalgae to treat carbon dioxide (CO2)-rich industrial off-gas has been suggested as both beneficial for emissions reduction and economically favorable for the production of microalgal products. Common sources of off-gases include coal combustion (2-15% CO2), cement production (8-15% CO2), coke production (18-23% CO2), and ore smelting (6-7% CO2). However, industrial off-gas also commonly contains other acid gas components [typically nitrogen oxides (NOX) and sulfur dioxide (SO2)] and metals that could inhibit microalgae growth and productivity. To utilize industrial off-gas effectively in microalgae cultivation systems, a number of solutions have been proposed to overcome potential inhibitions. These include bioprospecting to identify suitable strains, genetic modification to improve specific cellular characteristics, chemical additions, and bioreactor designs and operating procedures.In this review, results from microalgae experiments related to utilizing off-gas are presented, and the outcomes of different conditions discussed along with potential solutions to resolve limitations associated with the application of off-gas.

The Biophysical Properties of Microalgal Cell Surfaces Govern Their Interactions with an Amphiphilic Chitosan Derivative Used for Flocculation and Flotation

Microalgae show great promise for producing valuable molecules like biofuels, but their large-scale production faces challenges, with harvesting being particularly expensive due to their low concentration in water, necessitating extensive treatment. While methods such as centrifugation and filtration have been proposed, their efficiency and cost-effectiveness are limited. Flotation, involving air-bubbles lifting microalgae to the surface, offers a viable alternative, yet the repulsive interaction between bubbles and cells can hinder its effectiveness. Previous research from our group proposed using an amphiphilic chitosan derivative, polyoctyl chitosan (PO-chitosan), to functionalize bubbles used in dissolved air flotation (DAF). Molecular-scale studies performed using atomic force microscopy (AFM) revealed that PO-chitosan's efficiency correlates with cell surface properties, particularly hydrophobic ones, raising the question of whether this molecule can in fact be used more generally to harvest different microalgae. Evaluating this, we used a different strain of Chlorella vulgaris and first characterized its surface properties using AFM. Results showed that cells were hydrophilic but could still interact with PO-chitosan on bubble surfaces through a different mechanism based on specific interactions. Although force levels were low, flotation resulted in 84% separation, which could be explained by the presence of AOM (algal organic matter) that also interacts with functionalized bubbles, enhancing the overall separation. Finally, flocculation was also shown to be efficient and pH-independent, demonstrating the potential of PO-chitosan for harvesting microalgae with different cell surface properties and thus for further sustainable large-scale applications.

Molecular design of microalgae as sustainable cell factories

Microalgae are regarded as sustainable and potent chassis for biotechnology. Their capacity for efficient photosynthesis fuels dynamic growth independent from organic carbon sources and converts atmospheric CO2 directly into various valuable hydrocarbon-based metabolites. However, approaches to gene expression and metabolic regulation have been inferior to those in more established heterotrophs (e.g., prokaryotes or yeast) since the genetic tools and insights in expression regulation have been distinctly less advanced. In recent years, however, these tools and their efficiency have dramatically improved. Various examples have demonstrated new trends in microalgal biotechnology and the potential of microalgae for the transition towards a sustainable bioeconomy.

Neochloris oleoabundans cell wall rupture through melittin peptide: a new approach to increase lipid recovery

OBJECTIVES

Microalgae cell wall affects the recovery of lipids, representing one of the main difficulties in the development of biofuel production. This work aimed to test a new method based on melittin peptide to induce a cellular disruption in N. oleoabundans.

RESULTS

Neochloris oleoabundans cells were grown at 32 °C in the presence of a high concentration of nitrate-phosphate, causing a cell disruption extent of 83.6%. Further, a two-fold increase in lipid recovery following melittin treatment and solvent extraction was observed. Additionally, it was possible to verify the effects of melittin, both before and after treatment on the morphology of the cells. Scanning electron microscopy (SEM) and confocal images of the melittin-treated microalgae revealed extensive cell damage with degradation of the cell wall and release of intracellular material.

CONCLUSIONS

Melittin produced a selective cell wall rupture effect in N. oleoabundans under some culture conditions. These results represent the first report on the effect of melittin on lipid recovery from microalgae.

Microalgae as an Alternative Mineral Source in Poultry Nutrition

This review explores the potential of microalgae as a sustainable and nutritionally rich alternative for mineral supplementation in poultry diets, addressing both the opportunities and challenges in this emerging field. Poultry nutrition, pivotal to the health and productivity of birds, traditionally relies on inorganic and organic mineral sources which, while effective, raise environmental and economic concerns. Microalgae offer a promising solution with their high contents of essential minerals, proteins, vitamins, and bioactive compounds. This review delves into the nutritional profiles of various microalgae, highlighting their rich contents of minerals which are crucial for physiological processes in poultry. It examines the bioavailability of these minerals and their impact on poultry health and productivity. Furthermore, it evaluates the environmental sustainability of microalgae cultivation and acknowledges the challenges in using microalgae in poultry diets, particularly in terms of the economic viability of large-scale production and the consistency of nutrient composition. It discusses the importance of rigorous safety assessments and regulatory compliance, given the potential risks of toxins and heavy metals. Overall, this analysis aims to provide a clear understanding of the role microalgae could play in poultry nutrition and address sustainability challenges in animal agriculture while also considering future perspectives and advancements needed in this field.

Investigating the effect of supplementing different levels of Isochrysis galbana on in vitro rumen fermentation parameters

This study aimed to investigate the effect of supplementing Isochrysis galbana (I. galbana) at levels of 0 (control), 1, 2, 3, 4, and 5 (g/100 g DM) of the diet on the gas production kinetics, methane production, rumen fermentation parameters, and relative microbial population in vitro. Supplementation of I. galbana at high level (5 g/100 g DM) caused a significant decrease in total gas production (p < 0.05). High supplementation rates (4 and 5 g/100 g DM) decreased CH4 production relative to the control by 18.4% and 23.2%, respectively. Although rumen ammonia nitrogen (N-NH3) and total volatile fatty acids (VFA) concentrations were affected by dietary treatments, but the VFA profile did not changed. The relative proportion of protozoa and methanogenic archaea as well as Anaerovibrio lipolytica, Prevotella spp., Ruminococcus flavefaciens, and Fibrobacter succinogenes were decreased significantly as a result of microalgae supplementation. However, the relative abundance of Ruminococcus albus, Butyrivibrio fibrisolvens and Selenomonas ruminantium were significantly increased (p < 0.05), related to the control group. As well, the pH was not affected by dietary treatments. It was concluded that I. galbana reduced in vitro CH4 production and methanogenic archaea that its worth to be investigated further in in vivo studies.

Microwave-Assisted Dispersive Liquid-Liquid Microextraction Combined with HPLC for the Determination of Three Biogenic Amines in Beverages

Microwave-assisted dispersive liquid-liquid microextraction (MADLLME) coupled with high-performance liquid chromatography (HPLC) with diode array detector was used for the extraction and determination of three biogenic amines (BAs), including tryptamine, histamine and phenylethylamine in beverages (beer, cherry juice and white spirit). Compared with solid-phase extraction, solid-phase microextraction and liquid-phase microextraction, which is more solvent use with lower extraction efficiency, this MADLLME method obviously shortened analytical time, the rapid heating of aqueous samples with non-ionizing electromagnetic radiation, a lower solvent use and enhanced extraction efficiency. Because of good extraction for three BAs, [3C6PC14][FeCl4] was used as an extraction solvent. We showed a tunable selectivity of magnetic ionic liquids (MILs) toward extracting BAs by changing anion or cation due to the modification of the interaction between the MIL and the BAs. Extraction conditions including the type and volume of extraction solvent, microwave power, microwave-assisted extraction time, sample pH, disperser and interference experiment were investigated. Under the optimal conditions, a good linear relationship was found in the concentration range of 100-2,000 ng mL-1 for three BAs with correlation coefficient (R2) of 0.995-0.999. The limit of detections (S/N = 3) and limit of quantitations (S/N = 10) were in the range of 3.46-4.96 ng mL-1 and 10.44-14.88 ng mL-1, respectively. The recoveries of three targets were in the range of 84.3-108.5%, and the relative standard deviations based on the peak areas for six replicate analyses of beverages spiked with 10, 50 and 100 ng mL-1 of each biogenic amine were lower than 7.9%. This method has also been successfully applied to analyze the real samples at three different spiked concentrations, and excellent results have been obtained.

Microalgal co-cultivation -recent methods, trends in omic-studies, applications, and future challenges

The burgeoning human population has resulted in an augmented demand for raw materials and energy sources, which in turn has led to a deleterious environmental impact marked by elevated greenhouse gas (GHG) emissions, acidification of water bodies, and escalating global temperatures. Therefore, it is imperative that modern society develop sustainable technologies to avert future environmental degradation and generate alternative bioproduct-producing technologies. A promising approach to tackling this challenge involves utilizing natural microbial consortia or designing synthetic communities of microorganisms as a foundation to develop diverse and sustainable applications for bioproduct production, wastewater treatment, GHG emission reduction, energy crisis alleviation, and soil fertility enhancement. Microalgae, which are photosynthetic microorganisms that inhabit aquatic environments and exhibit a high capacity for CO2 fixation, are particularly appealing in this context. They can convert light energy and atmospheric CO2 or industrial flue gases into valuable biomass and organic chemicals, thereby contributing to GHG emission reduction. To date, most microalgae cultivation studies have focused on monoculture systems. However, maintaining a microalgae monoculture system can be challenging due to contamination by other microorganisms (e.g., yeasts, fungi, bacteria, and other microalgae species), which can lead to low productivity, culture collapse, and low-quality biomass. Co-culture systems, which produce robust microorganism consortia or communities, present a compelling strategy for addressing contamination problems. In recent years, research and development of innovative co-cultivation techniques have substantially increased. Nevertheless, many microalgae co-culturing technologies remain in the developmental phase and have yet to be scaled and commercialized. Accordingly, this review presents a thorough literature review of research conducted in the last few decades, exploring the advantages and disadvantages of microalgae co-cultivation systems that involve microalgae-bacteria, microalgae-fungi, and microalgae-microalgae/algae systems. The manuscript also addresses diverse uses of co-culture systems, and growing methods, and includes one of the most exciting research areas in co-culturing systems, which are omic studies that elucidate different interaction mechanisms among microbial communities. Finally, the manuscript discusses the economic viability, future challenges, and prospects of microalgal co-cultivation methods.

Path toward Sustainability in Wastewater Management in Brazil

Developing countries have not carried out the adequate management of wastewater and are a long way off meeting the sustainability goal of universal access to safely managed sanitation services by 2030. This article discusses sustainability in wastewater management and conducts a narrative literature review to analyze four stages on the path toward sustainability: (1) the prevention of or reduction in pollution at the source; (2) wastewater collection and treatment; (3) using wastewater as an alternative source of water; and (4) the recovery of useful by-products. It also provides an overview of wastewater management in Brazil and shows the advantages of using wastewater to produce biofuel in a country in which 48.3% of energy production comes from renewable sources.

CO2 capture and lipid production performance of microalgae in the S-shaped photobioreactor under different culture modes

An S-shaped photobioreactor was designed by adding grooves and baffles in the traditional photobioreactor to improve the culture efficiency of microalgae. After that, the parameters of the characterization of the S-shaped photobioreactor, such as the mixing time, gas holdup, and gas-liquid mass transfer coefficient, were determined. The biomass, lipid production rate, and average CO₂ capture rate of microalgae were then analyzed under different culture modes. Finally, the feasibility of using digested piggery wastewater combined with simulated flue gas was explored as a culture mode for the microalgae and the lipid properties of the microalgae were analyzed. The results revealed that, at a flow rate of 0.08 vvm, the mixing time was reduced by 8.5 s, the gas hold-up increased by 44.6% and the gas-liquid mass transfer ability was also improved. Improvements were also observed in the biomass values, lipid production rate, and average CO₂ capture rate of the microalgae under different culture conditions, with respective values reaching 0.23 g·(L·d)^-1, 70.28 mg·(L·d)^-1, and 0.43 g·(L·d)^-1 under the mixotrophic mode. Additionally, digested piggery wastewater combined with the simulated microalgae flue gas culture was determined to be feasible. The biomass, lipid production rate, and the average CO₂ capture rate of microalgae, the values of which were 0.22 g·(L·d)^-1, 52.55 mg·(L·d)^-1, and 0.41 g·(L·d)^-1, respectively. Lipid was observed to have the potential to produce high-quality biofuel.

A high-value biohythane production: Feedstocks, reactor configurations, pathways, challenges, technoeconomics and applications

In recent years, the demand for high-quality biofuels from renewable sources has become an aspirational goal to offer a clean environment by alternating the depleting fossil fuels to meet future energy needs. In this aspect, biohythane production from wastes has received extensive research interest since it contains superior fuel characteristics than the promising conventional biofuel i.e. biogas. The main aim is to promote research and potentials of biohythane production by a systematic review of scientific literature on the biohythane production pathways, substrate/microbial consortium suitability, reactor design, and influential process/operational factors. Reactor configuration also decides the product yield in addition to other key factors like waste composition, temperature, pH, retention time and loading rates. Hence, a detailed emphasis on different reactor configurations with respect to the type of feedstock has also been given. The technical challenges are highlighted towards process optimization and system scale up. Meanwhile, solutions to improve product yield, technoeconomics, applications and key policy and governance factors to build a hydrogen based society have also been discussed.

Effect of Halide Anions on the Electroreduction of CO2 to C2 H4 : A Density Functional Theory Study

The halide anions present in the electrolyte improve the Faradaic efficiencies (FEs) of the multi-hydrocarbon (C₂₊ ) products for the electrochemical reduction of CO₂ over copper (Cu) catalysts. However, the mechanism behind the increased yield of C₂₊ products with the addition of halide anions remains indistinct. In this study, we analysed the mechanism by investigating the electronic structures and computing the relative free energies of intermediates formed from CO₂ to C₂ H₄ on the Cu (100) facet based on density functional theory (DFT) calculations. The results show that formyl *CHO from the hydrogenation reaction of the adsorbed *CO acts as the key intermediate, and the C-C coupling reaction occurs preferentially between *CHO and *CO with the formation of a *CHO-CO intermediate. We then propose a free-energy pathway of C₂ H₄ formation. We find that the presence of halide anions significantly decreases the free energy of the *CHOCH intermediate, and enhances desorption of C₂ H₄ in the order of I^- >Cl^- >Br^- >F^- . Lastly, the obtained results are rationalized through Bader charge analysis.

Exploration of Bioinformatics on Microbial Fuel Cell Technology: Trends, Challenges, and Future Prospects

Microbial fuel cells (MFCs) are a cost-effective and environmentally friendly alternative energy method. MFC technology has gained much interest in recent decades owing to its effectiveness in remediating wastewater and generating bioelectricity. The microbial fuel cell generates energy mainlybecause of oxidation-reduction reactions. In this reaction, electrons were transferred between two reactants. Bioinformatics is expanding across a wide range of microbial fuel cell technology. Electroactive species in the microbial community were evaluated using bioinformatics methodologies in whole genome sequencing, RNA sequencing, transcriptomics, metagenomics, and phylogenetics. Technology advancements in microbial fuel cells primarily produce power from organic and inorganic waste from various sources. Reduced chemical oxygen demand and waste degradation are two added advantages for microbial fuel cells. From plants, bacteria, and algae, microbial fuel cells were developed. Due to the rapid advancement of sequencing techniques, bioinformatics approaches are currently widely used in the technology of microbial fuel cells. In addition, they play an important role in determining the composition of electroactive species in microorganisms. The metabolic pathway is also possible to determine with bioinformatics resources. A computational technique that reveals the nature of the mediators and the substrate was also used to predict the electrochemical properties. Computational strategies were used to tackle significant challenges in experimental procedures, such as optimization and understanding microbiological systems. The main focus of this review is on utilizing bioinformatics techniques to improve microbial fuel cell technology.

Photosynthetic Carbon Uptake Correlates with Cell Protein Content during Lipid Accumulation in the Microalga Chlorella vulgaris NIES 227

Large-scale microalgae cultivation for biofuel production is currently limited by the possibility of maintaining high microalgae yield and high lipid content, concomitantly. In this study, the physiological changes of Chlorella vulgaris NIES 227 during lipid accumulation under nutrient limitation was monitored in parallel with the photosynthetic capacity of the microalgae to fix carbon from the proxy of oxygen productivity. In the exponential growth phase, as the biomass composition did not vary significantly (approx. 53.6 ± 7.8% protein, 6.64 ± 3.73% total lipids, and 26.0 ± 9.2% total carbohydrates of the total biomass dry-weight), the growth capacity of the microalgae was preserved (with net O2 productivity remaining above (4.44 ± 0.93) × 10−7 g O2·µmol PAR−1). Under nutrient limitation, protein content decreased (minimum of approx. 18.6 ± 6.0%), and lipid content increased (lipid content up to 56.0 ± 0.8%). The physiological change of the microalgae was associated with a loss of photosynthetic activity, down to a minimum (1.27 ± 0.26) × 10−7 g O2·µmol PAR−1. The decrease in photosynthetic O2 productivity was evidenced to correlate to the cell internal-protein content (R2 = 0.632, p = 2.04 × 10−6, N = 25). This approach could serve to develop productivity models, with the aim of optimizing industrial processes.

Fluorescent Imaging and Sorting of High-Lipid-Content Strains of Green Algae by Using an Aggregation-Induced Emission Luminogen

Microalgae-based biofuels are receiving attention at the environmental, economic, and social levels because they are clean, renewable, and quickly produced. The green algae Chlorella vulgaris has been extensively studied in research laboratories and the biofuel industry as a model organism to increase lipid production to be cost-effective in commercial production. In this work, we utilized a lipid-droplet-specific luminogen with aggregation-induced emission (AIE) characteristics to increase the lipid production of C. vulgaris by fluorescent imaging and sorting of those algal cells with large and rich lipid droplets for subculturing. The AIE-active TPA-A enabled real-time monitoring of the size and number of lipid droplets in C. vulgaris during their growth period so that we can identify the best time for harvesting. Furthermore, the algae cells with high lipid content were identified and collected for subculturing by the technique of fluorescence-activated cell sorting (FACS). The lipid production in the generation of two successive selections was almost doubled compared to the generation with natural selection. This work demonstrated that the technologies of AIE and FACS could be applied together to improve the production of a third-generation biofuel.

Development of a stable semi-continuous lipid production system of an oleaginous Chlamydomonas sp. mutant using multi-omics profiling

Background

Microalgal lipid production has attracted global attention in next-generation biofuel research. Nitrogen starvation, which drastically suppresses cell growth, is a common and strong trigger for lipid accumulation in microalgae. We previously developed a mutant Chlamydomonas sp. KAC1801, which can accumulate lipids irrespective of the presence or absence of nitrates. This study aimed to develop a feasible strategy for stable and continuous lipid production through semi-continuous culture of KAC1801.

Results

KAC1801 continuously accumulated > 20% lipid throughout the subculture (five generations) when inoculated with a dry cell weight of 0.8–0.9 g L⁻¹ and cultured in a medium containing 18.7 mM nitrate, whereas the parent strain KOR1 accumulated only 9% lipid. Under these conditions, KAC1801 continuously produced biomass and consumed nitrates. Lipid productivity of 116.9 mg L⁻¹ day⁻¹ was achieved by semi-continuous cultivation of KAC1801, which was 2.3-fold higher than that of KOR1 (50.5 mg L⁻¹ day⁻¹). Metabolome and transcriptome analyses revealed a depression in photosynthesis and activation of nitrogen assimilation in KAC1801, which are the typical phenotypes of microalgae under nitrogen starvation.

Conclusions

By optimizing nitrate supply and cell density, a one-step cultivation system for Chlamydomonas sp. KAC1801 under nitrate-replete conditions was successfully developed. KAC1801 achieved a lipid productivity comparable to previously reported levels under nitrogen-limiting conditions. In the culture system of this study, metabolome and transcriptome analyses revealed a nitrogen starvation-like response in KAC1801.

Supplementary Information

The online version contains supplementary material available at 10.1186/s13068-022-02196-w.

Farming on Mars: Treatment of basaltic regolith soil and briny water simulants sustains plant growth

A fundamental challenge in human missions to Mars is producing consumable foods efficiently with the in situ resources such as soil, water, nutrients and solar radiation available on Mars. The low nutrient content of martian soil and high salinity of water render them unfit for direct use for propagating food crops on Mars. It is therefore essential to develop strategies to enhance nutrient content in Mars soil and to desalinate briny water for long-term missions on Mars. We report simple and efficient strategies for treating basaltic regolith simulant soil and briny water simulant for suitable resources for growing plants. We show that alfalfa plants grow well in a nutrient-limited basaltic regolith simulant soil and that the alfalfa biomass can be used as a biofertilizer to sustain growth and production of turnip, radish and lettuce in the basaltic regolith simulant soil. Moreover, we show that marine cyanobacterium Synechococcus sp. PCC 7002 effectively desalinates the briny water simulant, and that desalination can be further enhanced by filtration through basalt-type volcanic rocks. Our findings indicate that it is possible to grow food crops with alfalfa treated basaltic regolith martian soil as a substratum watered with biodesalinated water.

Drying Microalgae Using an Industrial Solar Dryer: A Biomass Quality Assessment

Microalgae are considered a promising resource of proteins, lipids, carbohydrates, and other functional biomolecules for food and feed markets. Competitive drying solutions are required to meet future demands for high-quality algal biomass while ensuring proper preservation at reduced costs. Since often used drying methods, such as freeze or spray drying, are energy and time consuming, more sustainable processes remain to be developed. This study tested an indirect and hybrid solar dryer as an alternative to conventional freeze drying of industrially produced Tetraselmis chui and Nannochloropsis oceanica wet paste. The effects of the drying method on biomass quality parameters, including biochemical profiles, functional properties, and microbial safety, were assessed. No significant differences were found between the applied drying technologies for total proteins, carbohydrates, lipids, and fatty acid profiles. On the other hand, some pigments showed significant differences, displaying up to 44.5% higher contents in freeze-dried samples. Minor differences were also registered in the mineral profiles (<10%). Analyses of microbial safety and functional properties of the solar-dried biomass appear adequate for food and feed products. In conclusion, industrial solar drying is a sustainable technology with a high potential to preserve high-quality microalgal biomass for various markets at expected lower costs.

The role of bioprocess systems engineering in extracting chemicals and energy from microalgae

In this study, the role of process systems engineering in enhancing the algae economy is highlighted. First, basic characteristics of the various strains of microalgae are presented. In addition, the beneficial extracted bioproducts and their applications are reviewed. Then, an overview of the various technologies available in each step of biorefinery to produce added-value products and biofuels from microalgae is provided. These technologies are compared in terms of required energy and efficiency. Different perspectives of the algae industry, from molecule to enterprises scale where process systems engineering can have a role, are addressed. Subsequently, the roles of process systems engineering in process and product design, process control, and supply chain of the algae biorefinery are discussed. It is found that process systems engineering can play an important role in the biobased economy, especially by applying sustainability and economic concepts in the decision-making process for selecting the best feedstock, processing pathways, and desired products. Tools such as market analysis, techno-economic analysis, life cycle assessment (LCA), and supply chain (SC) analysis can be applied to design sustainable algae biorefinery. There are, however, several challenges such as the lack of data, the complexity of optimization, and validation that should be addressed before using these tools.

Inertia-Acoustophoresis Hybrid Microfluidic Device for Rapid and Efficient Cell Separation

In this paper, we proposed an integrated microfluidic device that could demonstrate the non-contact, label-free separation of particles and cells through the combination of inertial microfluidics and acoustophoresis. The proposed device integrated two microfluidic chips which were a PDMS channel chip on top of the silicon-based acoustofluidic chip. The PDMS chip worked by prefocusing the particles/cells through inducing the inertial force of the channel structure. The connected acoustofluidic chips separated particles based on their size through an acoustic radiation force. In the serpentine-shaped PDMS chip, particles formed two lines focusing in the channel, and a trifugal-shaped acoustofluidic chip displaced and separated particles, in which larger particles focused on the central channel and smaller ones moved to the side channels. The simultaneous fluidic works allowed high-efficiency particle separation. Using this novel acoustofluidic device with an inertial microchannel, the separation of particles and cells based on their size was presented and analyzed, and the efficiency of the device was shown. The device demonstrated excellent separation performance with a high recovery ratio (up to 96.3%), separation efficiency (up to 99%), and high volume rate (>100 µL/min). Our results showed that integrated devices could be a viable alternative to current cell separation based on their low cost, reduced sample consumption and high throughput capability.

Effects of the induction of anoxia in photobioreactor on effective cultivation of Scenedesmus acuminatus under mixotrophic cultivation mode

The purpose of this study was to investigate the optimum conditions of several factors (i.e. types and concentration of acetate, aeration rate, pH control) for maximizing the mixotrophic cultivation of Scenedesmus acuminatus using acetate as an organic carbon source. When acetate was used, dissolved oxygen (DO) was quickly consumed and resulted in an anoxic condition for 52 h. Then, DO increased quickly by photosynthetic reaction. Whenever we put acetate in a reactor after DO was recovered to higher than 7 mg/L, cells were quickly grown via cell respiration, which subsequently resulted in an anoxic condition. Compared to aeration, ammonium acetate, ammonium acetate with aeration tests, the highest maximum biomass productivity of 0.73 g/L/d was obtained for pH control test with ammonium acetate dosage. From this study, we found that DO was essential for the fast assimilation of acetate and depleted DO was quickly regenerated for pH control test. From this fact, we found that pH control test with ammonium acetate dosage was the best cultivation method for Scenedesmus acuminatus under mixotrophic condition. These findings could be a useful reference for maximizing the cultivation of S. acuminatus in industrial-scale applications.

Assessment of Eicosapentaenoic Acid (EPA) Production from Filamentous Microalga Tribonema aequale: From Laboratory to Pilot-Scale Study

It has long been explored to use EPA-rich unicellular microalgae as a fish oil alternative for production of the high-value omega-3 fatty acid eicosapentaenoic acid (EPA, 20:5, n-3). However, none of the efforts have ever reached commercial success. This study reported a filamentous yellow-green microalga Tribonema aequale that possesses the ability to grow rapidly and synthesize significant amounts of EPA. A series of studies were conducted in a glass column photobioreactor under laboratory culture conditions and in pilot-scale open raceway ponds outdoors. The emphasis was placed on the specific nutrient requirements and the key operational parameters in raceway ponds such as culture depth and mixing regimes. When optimized, T. aequale cells contained 2.9% of EPA (w/w) and reached a very high biomass concentration of 9.8 g L⁻¹ in the glass column photobioreactor. The cellular EPA content was increased further to 3.5% and the areal biomass and EPA productivities of 16.2 g m⁻² d⁻¹ and 542.5 mg m⁻² d⁻¹, respectively, were obtained from the outdoor pilot-scale open raceway ponds, which were the record high figures reported thus far from microalgae-based EPA production. It was also observed that T. aequale was highly resistant to microbial contamination and easy for harvesting and dewatering, which provide two additional competitive advantages of this filamentous microalga over the unicellular counterparts for potential commercial production of EPA and other derived co-products.

Humic Substances as Microalgal Biostimulants—Implications for Microalgal Biotechnology

Humic substances (HS) act as biostimulants for terrestrial photosynthetic organisms. Their effects on plants are related to specific HS features: pH and redox buffering activities, (pseudo)emulsifying and surfactant characteristics, capacity to bind metallic ions and to encapsulate labile hydrophobic molecules, ability to adsorb to the wall structures of cells. The specific properties of HS result from the complexity of their supramolecular structure. This structure is more dynamic in aqueous solutions/suspensions than in soil, which enhances the specific characteristics of HS. Therefore, HS effects on microalgae are more pronounced than on terrestrial plants. The reported HS effects on microalgae include increased ionic nutrient availability, improved protection against abiotic stress, including against various chemical pollutants and ionic species of potentially toxic elements, higher accumulation of value-added ingredients, and enhanced bio-flocculation. These HS effects are similar to those on terrestrial plants and could be considered microalgal biostimulant effects. Such biostimulant effects are underutilized in current microalgal biotechnology. This review presents knowledge related to interactions between microalgae and humic substances and analyzes the potential of HS to enhance the productivity and profitability of microalgal biotechnology.

Light Stress after Heterotrophic Cultivation Enhances Lutein and Biofuel Production from a Novel Algal Strain Scenedesmus obliquus ABC-009

Scenedesmus obliquus ABC-009 is a microalgal strain that accumulates large amounts of lutein, particularly when subjected to growth-limiting conditions. Here, the performance of this strain was evaluated for the simultaneous production of lutein and biofuels under three different modes of cultivation - photoautotrophic mode using BG-11 medium with air or 2% CO₂ and heterotrophic mode using YM medium. While it was found that the highest fatty acid methyl ester (FAME) level and lutein content per biomass (%) were achieved in BG-11 medium with CO₂ and air, respectively, heterotrophic cultivation resulted in much higher biomass productivity. While the cell concentrations of the cultures grown under BG-11 and CO₂ were largely similar to those grown in YM medium, the disparity in the biomass yield was largely attributed to the larger cell volume in heterotrophically cultivated cells. Post-cultivation light treatment was found to further enhance the biomass productivity in all three cases and lutein content in heterotrophic conditions. Consequently, the maximum biomass (757.14 ± 20.20 mg/l/d), FAME (92.78 ± 0.08 mg/l/d), and lutein (1.006 ± 0.23 mg/l/d) productivities were obtained under heterotrophic cultivation. Next, large-scale lutein production using microalgae was demonstrated using a 1-ton open raceway pond cultivation system and a low-cost fertilizer (Eco-Sol). The overall biomass yields were similar in both media, while slightly higher lutein content was obtained using the fertilizer owing to the higher nitrogen content.

Evaluation of Euglena gracilis 815 as a New Candidate for Biodiesel Production

Euglena comprises over 200 species, of which Euglena gracilis is a model organism with a relatively high fatty acid content, making it an excellent potential source of biodiesel. This study isolated and characterized a new strain named E. gracilis 815. E. gracilis 815 cells were cultivated under light and dark conditions, with either ethanol or glucose as an external carbon source and an autotrophic medium as control. To achieve maximum active substances within a short period i.e., 6 days, the effects of the light condition and carbon source on the accumulation of bioactive ingredients of E. gracilis 815 were explored, especially fatty acids. In comparison with the industrially used E. gracilis Z strain, E. gracilis 815 exhibited high adaptability to different carbon sources and light conditions, with a comparable biomass and lipid yield. The content and composition of fatty acids of E. gracilis 815 were further determined to assess its potential for biodiesel use. Results suggested that E. gracilis 815 has biodiesel potential under glucose addition in dark culture conditions and could be a promising source for producing unsaturated fatty acids. Therefore, E. gracilis 815 is a candidate for short-chain jet fuel, with prospects for a wide variety of applications.

Sustainable biodiesel production from microalgae Graesiella emersonii through valorization of garden wastes-based vermicompost

Biodiesel production from microalgae has gained significant interest recently due to the growing energy demand and non-renewable nature of petroleum. However, high cost of production and environmental health related issues like excess use of inorganic fertilizers, eutrophication are the major constraints in commercial-scale biodiesel production. Besides this, solid wastes (garden-based) management is also a global concern. In the present study, to overcome these limitations vermicompost extract was tested as nutrient source to enhance growth performance and lipid production from a freshwater microalga (Graesiella emersonii MN877773). Garden wastes were first converted into vermicompost manure and its extract (aerobic and anaerobically digested) was prepared. The efficacy of the extract was then tested in combination with BG11 medium. The mixotrophic cultivation of microalgae in anaerobically digested vermicompost extract at 50:50 combination with BG11 medium enhanced the cell biomass (0.64 g d. wt. L^-1) and lipid productivity (3.18 mg L^-1 day^-1) of microalgae by two times. Moreover, the combination also improved the saturated (methyl palmitate) and monounsaturated fatty acids (oleic acid) content in the test algae. The quality of biodiesel also complies with all the properties of biodiesel standard provided by India, the USA, and Europe except the cold filter plugging property. The combination was also found to improve the cell biomass (0.041 g L^-1) as compared to BG11 medium in mass-scale cultivation. Hence, the study proved that G. emersonii grown in media supplemented with garden waste-based vermicompost extract had significant potential for mass-scale biodiesel and bioproduct production.

Machine learning-informed and synthetic biology-enabled semi-continuous algal cultivation to unleash renewable fuel productivity

Algal biofuel is regarded as one of the ultimate solutions for renewable energy, but its commercialization is hindered by growth limitations caused by mutual shading and high harvest costs. We overcome these challenges by advancing machine learning to inform the design of a semi-continuous algal cultivation (SAC) to sustain optimal cell growth and minimize mutual shading. An aggregation-based sedimentation (ABS) strategy is then designed to achieve low-cost biomass harvesting and economical SAC. The ABS is achieved by engineering a fast-growing strain, Synechococcus elongatus UTEX 2973, to produce limonene, which increases cyanobacterial cell surface hydrophobicity and enables efficient cell aggregation and sedimentation. SAC unleashes cyanobacterial growth potential with 0.1 g/L/hour biomass productivity and 0.2 mg/L/hour limonene productivity over a sustained period in photobioreactors. Scaling-up the SAC with an outdoor pond system achieves a biomass yield of 43.3 g/m²/day, bringing the minimum biomass selling price down to approximately $281 per ton.

Growth limitation caused by mutual shading and the high harvest cost hamper algal biofuel production. Here, the authors overcome these two problems by designing a semi-continuous algal cultivation system and an aggregation-based sedimentation strategy to achieve high levels production of biomass and limonene.

Anaerobic digestate as a low-cost nutrient source for sustainable microalgae cultivation: A way forward through waste valorization approach

To suffice the escalating global energy demand, microalgae are deemed as high potential surrogate feedstocks for liquid fuels. The major encumbrance for the commercialization of microalgae cultivation is due to the high costs of nutrients such as carbon, phosphorous, and nitrogen. Meanwhile, the organic-rich anaerobic digestate which is difficult to be purified by conventional techniques is appropriate to be used as a low-cost nutrient source for the economic viability and sustainability of microalgae production. This option is also beneficial in terms of reutilize the organic fraction of solid waste instead of discarded as zero-value waste. Anaerobic digestate is the side product of biogas production during anaerobic digestion process, where optimum nutrients are needed to satisfy the physiological needs to grow microalgae. Besides, the turbidity, competing biological contaminants, ammonia and metal toxicity of the digestate are also potentially contributing to the inhibition of microalgae growth. Thus, this review is aimed to explicate the feasibility of utilizing the anaerobic digestate to cultivate microalgae by evaluating their potential challenges and solutions. The proposed potential solutions (digestate dilution and pre-treatment, microalgae strain selection, extra organics addition, nitrification and desulfurization) corresponding to the state-of-the-art challenges are applicable as future directions of the research.

Durable hydrophobic Enteromorpha design for controlling oil spills in marine environment prepared by organosilane modification for efficient oil-water separation

Hydrophobic and oleophilic materials are attractive candidates for efficient oil collection due to their excellent oil-water separation. However, the most of currently reported oil adsorption materials are limited resources or require complicated preparation steps, which causes high energy consumption and not be practical for large-scale application. Herein, we report a facile strategy to modify the wettability of Enteromorpha from hydrophilic to hydrophobic, which not only greatly reduces energy consumption but also shows the outstanding capacity for oil-water separation with the maximum adsorption capacities is 11.4 g/g and the contact angle reaches 137°. The successful modification of the Enteromorpha is achieved by grafting n-octyltriethoxysilane on the surface of the pristine Enteromorpha. The hydrophobic and superoleophilic Enteromorpha guarantee adequate voids in the fibrous bundles only for oil adsorption and the oil floating on the seawater is removed by the formation of hydrogen bonding between oil and modified Enteromorpha. By optimizing test, the optimal adsorption conditions are adsorption time of 60 min, oil-water ratio of 1:10 and pH of 7. Our reported hydrophobic organosilane modified Enteromorpha will open a new avenue to control marine oil pollution and suppress the damage of Enteromorpha to the marine ecology system.

Microalgae role in sustainable bioenergy generation as determined by light microscopy

The main aim of this study was to explore the role of light microscopy in the identification of microalgae as a source of study. Three microalgal species (Nostoc, Anabaena, and Volvox) were identified by light. In this study, different parameters of the oil extraction process from algae biomass were studied. The samples of Nostoc, Anabaena, and Volvox were collected from the freshwater bodies in Lahore, and the samples were identified by light microscopy. Pretreatment of algae was done which includes harvesting, drying, and grinding. The sun drying of sample was done. Solvent extraction was done for the extraction of oil from algal cells. Solvent n-hexane and diethyl ether were used alone as well as in combination. Effects of n-hexane to oil ratio, size of algal biomass, and contact time on the percentage yield of extracted oil were studied and analyzed. It was concluded that maximum amount of oil was extracted from algae by using a greater ratio of solvent to algal biomass, maximum contact time, and smaller algal biomass size. The extracted oil yield was satisfactory, demonstrating the potential of microalgae for biodiesel production. It was discovered that if algal oil is subjected to transesterification, it can be turned into biodiesel, and light microscopy can be used to assess anatomical characteristics. However, more research will be required for transesterification.

Microalgae Harvesting by Self-Driven 3D Microfiltration with Rationally Designed Porous Superabsorbent Polymer (PSAP) Beads

Microalgae are emerging as next-generation renewable resources for production of sustainable biofuels and high-value bioproducts. Conventional microalgae harvesting methods including centrifugation, filtration, flocculation, and flotation are limited by intensive energy consumption, high capital cost, long treatment time, or the requirement of chemical addition. In this study, we design and fabricate porous superabsorbent polymer (PSAP) beads for self-driven 3D microfiltration of microalgal cultures. The PSAP beads can swell fast in a microalgal suspension with high water absorption capacity. During this process, microalgal cells are excluded outside the beads and successfully concentrated in the residual medium. After treatment, the beads can be easily separated from the microalgal concentrate and reused after dewatering. In one PSAP treatment, a high concentration factor for microalgal cultures up to 13 times can be achieved in 30 min with a harvesting efficiency higher than 90%. Furthermore, microalgal cultures could be concentrated from 0.2 g L^-1 to higher than 120 g L^-1 with minimal biomass loss through multistage PSAP treatments. Therefore, the use of PSAP beads for microalgae harvesting is fast, effective, and scalable. It does not require any complex instrument or chemical addition. This technique potentially provides an efficient and feasible alternative to obtain high concentrations of functional biomass at a very low cost.

Role of Biofuels in Energy Transition, Green Economy and Carbon Neutrality

Modern civilization is heavily reliant on petroleum-based fuels to meet the energy demand of the transportation sector. However, burning fossil fuels in engines emits greenhouse gas emissions that harm the environment. Biofuels are commonly regarded as an alternative for sustainable transportation and economic development. Algal-based fuels, solar fuels, e-fuels, and CO2-to-fuels are marketed as next-generation sources that address the shortcomings of first-generation and second-generation biofuels. This article investigates the benefits, limitations, and trends in different generations of biofuels through a review of the literature. The study also addresses the newer generation of biofuels highlighting the social, economic, and environmental aspects, providing the reader with information on long-term sustainability. The use of nanoparticles in the commercialization of biofuel is also highlighted. Finally, the paper discusses the recent advancements that potentially enable a sustainable energy transition, green economy, and carbon neutrality in the biofuel sector.

Resource recovery through bioremediation of wastewaters and waste carbon by microalgae: a circular bioeconomy approach

Microalgal biomass-based biofuels are a promising alternative to fossil fuels. Microalgal biofuels' major obstacles are the water and carbon sources for their cultivation and biomass harvest from the liquid medium. To date, an economically viable process is not available for algal based biofuels. The circular bioeconomy is an attractive concept for reuse, reduce, and recycle resources. The recovery of nutrients from waste and effluents by microalgae could significantly impact the escalating demands of energy and nutraceutical source to the growing population. Wastewaters from different sources are enriched with nutrients and carbon, and these resources can be recovered and utilized for the circular bioeconomy approach. However, the utilization of wastewaters and waste seems to be an essential strategy for mass cultivation of microalgae to minimizing freshwater consumption, carbon, nutrients cost, nitrogen, phosphorus removal, and other pollutants loads from wastewater and generating sustainable biomass for value addition for either biofuels or other chemicals. Hence, the amalgamation of wastewater treatment with the mass cultivation of microalgae improved the conventional treatment process and environmental impacts. This review provides complete information on the latest progress and developments of microalgae as potential biocatalyst for the remediation of wastewaters and waste carbon to recover resources through biomass with metabolites for various industrial applications and large-scale cultivation in wastewaters, and future perspectives are discussed.

Biocrude Oil Production by Integrating Microalgae Polyculture and Wastewater Treatment: Novel Proposal on the Use of Deep Water-Depth Polyculture of Mixotrophic Microalgae

Microalgae have attracted significant attention worldwide as one of the most promising feedstock fossil fuel alternatives. However, there are a few challenges for algal fuels to compete with fossil fuels that need to be addressed. Therefore, this study reviews the R&D status of microalgae-based polyculture and biocrude oil production, along with wastewater treatment. Mixotrophic algae are free to some extent from light restrictions using organic matter and have the ability to grow well even in deep water-depth cultivation. It is proposed that integrating the mixotrophic microalgae polyculture and wastewater treatment process is the most promising and harmonizing means to simultaneously increase capacities of microalgae biomass production and wastewater treatment with a low land footprint and high robustness to perturbations. A large amount of mixotrophic algae biomass is harvested, concentrated, and dewatered by combining highly efficient sedimentation through flocculation and energy efficient filtration, which reduce the carbon footprint for algae fuel production and coincide with the subsequent hydrothermal liquefaction (HTL) conversion. HTL products are obtained with a relatively low carbon footprint and separated into biocrude oil, solid, aqueous, and gas fractions. Algae biomass feedstock-based HTL conversion has a high biocrude oil yield and quality available for existing oil refineries; it also has a bioavailability of the recycled nitrogen and phosphorus from the aqueous phase of algae community HTL. The HTL biocrude oil represents higher sustainability than conventional liquid fuels and other biofuels for the combination of greenhouse gas (GHG) and energy return on investment (EROI). Deep water-depth polyculture of mixotrophic microalgae using sewage has a high potential to produce sustainable biocrude oil within the land area of existing sewage treatment plants in Japan to fulfill imported crude oil.

Wastewater treatment by microalgae

The growth of the world's population increases the demand for fresh water, food, energy, and technology, which in turn leads to increasing amount of wastewater, produced both by domestic and industrial sources. These different wastewaters contain a wide variety of organic and inorganic compounds which can cause tremendous environmental problems if released untreated. Traditional treatment systems are usually expensive, energy demanding and are often still incapable of solving all challenges presented by the produced wastewaters. Microalgae are promising candidates for wastewater reclamation as they are capable of reducing the amount of nitrogen and phosphate as well as other toxic compounds including heavy metals or pharmaceuticals. Compared to the traditional systems, photosynthetic microalgae require less energy input since they use sunlight as their energy source, and at the same time lower the carbon footprint of the overall reclamation process. This mini-review focuses on recent advances in wastewater reclamation using microalgae. The most common microalgal strains used for this purpose are described as well as the challenges of using wastewater from different origins. We also describe the impact of climate with a particular focus on a Nordic climate.

Starch Rich Chlorella vulgaris: High-Throughput Screening and Up-Scale for Tailored Biomass Production

The use of microalgal starch has been studied in biorefinery frameworks to produce bioethanol or bioplastics, however, these products are currently not economically viable. Using starch-rich biomass as an ingredient in food applications is a novel way to create more value while expanding the product portfolio of the microalgal industry. Optimization of starch production in the food-approved species Chlorella vulgaris was the main objective of this study. High-throughput screening of biomass composition in response to multiple stressors was performed with FTIR spectroscopy. Nitrogen starvation was identified as an important factor for starch accumulation. Moreover, further studies were performed to assess the role of light distribution, investigating the role of photon supply rates in flat panel photobioreactors. Starch-rich biomass with up to 30% starch was achieved in cultures with low inoculation density (0.1 g L−1) and high irradiation (1800 µmol m−2 s−1). A final large-scale experiment was performed in 25 L tubular reactors, achieving a maximum of 44% starch in the biomass after 12 h in nitrogen starved conditions.

Energy balance of torrefied microalgal biomass with production upscale approached by life cycle assessment

Torrefaction is a thermochemical process used to convert the biomass into solid fuel. In this study, torrefaction increased the raw microalgal biomass' energy content from 20.22 MJ⋅kg^-1 to 27.93 MJ⋅kg^-1. To determine if more energy is produced than energy consumption from torrefaction, this study identified the energy balance of torrefied microalgal biomass production based on a life cycle approach. The energy analysis showed that, among all processes, torrefaction had the least amount of energy demand. The experimental setup, defined as scenario A, revealed that the principal source of energy demand, about 85%, was consumed on the microalgal growth using a photobioreactor system. A sensitivity analysis was also performed to determine the varying energy demand for torrefied microalgal biomass production. The different types of cultivation methods and various production scales were considered in scenarios B to D. Scenario D, which represented the commercial production-scale, the energy demand drastically decreased by 59.46% as compared to the experimental setup (scenario A). The open-pond cultivation system resulted in the least energy requirement, regardless of the production scale (scenarios B and C) among all the given scenarios. Unlike scenarios A and D, scenarios B and C identified the drying process to consume a high amount of energy. All the scenarios have shown an energy demand deficit. Therefore, efforts to decrease the energy demand on the upstream processes are needed to make the torrefied microalgal biomass a viable alternative energy source.

Astaxanthin from Haematococcus pluvialis: processes, applications, and market

Astaxanthin is a xanthophyll carotenoid widely used in aquaculture and nutraceutical industries. Among natural sources, the microalga Haematococcus pluvialis is the non-genetically modified organism with the greatest capacity to accumulate astaxanthin. Therefore, it is important to understand emerging strategies in upstream and downstream processing of astaxanthin from this microalga. This review covers all aspects regarding the production and the market of natural astaxanthin from H. pluvialis. Astaxanthin biosynthesis, metabolic pathways, and nutritional metabolisms from the green vegetative motile to red hematocyst stage were reviewed in detail. Also, traditional and emerging techniques on biomass harvesting and astaxanthin recovery were presented and evaluated. Moreover, the global market of astaxanthin was discussed, and guidelines for sustainability increasing of the production chain of astaxanthin from H. pluvialis were highlighted, based on biorefinery models. This review can serve as a baseline on the current knowledge of H. pluvialis and encourage new researchers to enter this field of research.

Genome-centric investigation of anaerobic digestion using sustainable second and third generation substrates

Biogas production through co-digestion of second and third generation substrates is an environmentally sustainable approach. Green willow biomass, chicken manure waste and microalgae biomass substrates were combined in the anaerobic digestion experiments. Biochemical methane potential test showed that biogas yields of co-digestions were significantly higher compared to the yield when energy willow was the sole substrate. To scale up the experiment continuous stirred-tank reactors (CSRTs) are employed, digestion parameters are monitored. Furthermore, genome-centric metagenomics approach was employed to gain functional insight into the complex anaerobic decomposing process. This revealed the importance of Firmicutes, Actinobacteria, Proteobacteria and Bacteroidetes phyla as major bacterial participants, while Methanomicrobia and Methanobacteria represented the archaeal constituents of the communities. The bacterial phyla were shown to perform the carbohydrate hydrolysis. Among the representatives of long-chain carbohydrate hydrolysing microbes Bin_61: Clostridia is newly identified metagenome assembled genome (MAG) and Bin_13: DTU010 sp900018335 is common and abundant in all CSTRs. Methanogenesis was linked to the slow-growing members of the community, where hydrogenotrophic methanogen species Methanoculleus (Bin_10) and Methanobacterium (Bin_4) predominate. A sensitive balance between H₂ producers and consumers was shown to be critical for stable biomethane production and efficient waste biodegradation.

Fish farm effluent as a nutrient source for algae biomass cultivation

One of the challenges of microalgae biotechnology is the cost of growth media nutrients, with microalgae consuming enormous quantities of fertilisers, more than other oil crops. The traditional use of synthetic fertilisers in mass cultivation of microalgae is associated with rising prices of crude oil and competition from traditional agriculture. The fact that fish farm wastewater (FFW) nutrients are released in the form preferred by microalgae (NH3 for nitrogen and PO4-3 for phosphate), and the ability of microalgae to use nitrogen from different sources, can be exploited by using fish farm effluent rich in nutrients (nitrogen and phosphorus) in the cultivation of cheaper microalgae biomass for production of biodiesel. The cultivation of algae biomass in FFW will also serve as wastewater treatment. We reviewed the benefits and potential of fish effluent in algae cultivation for the production of biodiesel. Microalgae can utilise nutrients in FFW for different applications desirable for the production of biomass, including the accumulation of lipids, and produce a fuel with desirable properties. Also, treating wastewater and reducing demand for fresh water are advantageous. The high lipid content and comparable biodiesel properties of Chlorella sorokiniana and Scenedesmus obliquus make both species viable for FFW cultivation for biodiesel production. Significance: The cost associated with microalgae growth media nutrients can be saved by using fish farm wastewater, which contains nutrients (nitrogen and phosphorus) suitable for microalgae cultivation. Fish farm wastewater has lower nutrient concentrations when compared to standard growth media suitable for higher lipid accumulation. Microalgae used as a biodiesel feedstock, cultivated in fish farm wastewater, has added benefits, including wastewater treatment.

Progress toward a bicarbonate-based microalgae production system

Commercial applications of microalgae for biochemicals and fuels are hampered by their high production costs, and the use of conventional carbon supplies is a key reason. Bicarbonate has been proposed as an alternative carbon source due to its potential advantages in lower carbon supply costs, convenience for photobioreactor development, biomass harvesting, and labor and energy savings. We review recent progress in bicarbonate-based microalgae cultivation, which validated previous assumptions, suggested further advantages, and demonstrated potential to significantly reduce production cost. Future research should focus on improving production efficiency and reducing energy inputs, including optimizing photobioreactor design, comprehensive utilization of natural power, and automation in production systems.

Current perspectives on integrated approaches to enhance lipid accumulation in microalgae

In recent years, research initiatives on renewable bioenergy or biofuels have been gaining momentum, not only due to fast depletion of finite reserves of fossil fuels but also because of the associated concerns for the environment and future energy security. In the last few decades, interest is growing concerning microalgae as the third-generation biofuel feedstock. The CO₂ fixation ability and conversion of it into value-added compounds, devoid of challenging food and feed crops, make these photosynthetic microorganisms an optimistic producer of biofuel from an environmental point of view. Microalgal-derived fuels are currently being considered as clean, renewable, and promising sustainable biofuel. Therefore, most research targets to obtain strains with the highest lipid productivity and a high growth rate at the lowest cultivation costs. Different methods and strategies to attain higher biomass and lipid accumulation in microalgae have been extensively reported in the previous research, but there are fewer inclusive reports that summarize the conventional methods with the modern techniques for lipid enhancement and biodiesel production from microalgae. Therefore, the current review focuses on the latest techniques and advances in different cultivation conditions, the effect of different abiotic and heavy metal stress, and the role of nanoparticles (NPs) in the stimulation of lipid accumulation in microalgae. Techniques such as genetic engineering, where particular genes associated with lipid metabolism, are modified to boost lipid synthesis within the microalgae, the contribution of "Omics" in metabolic pathway studies. Further, the contribution of CRISPR/Cas9 system technique to the production of microalgae biofuel is also briefly described.

Insights into upstream processing of microalgae: A review

The aim of this review is to provide insights into the upstream processing of microalgae, and to highlight the advantages of each step. This review discusses the most important steps of the upstream processing in microalgae research such as cultivation modes, photobioreactors design, preparation of culture medium, control of environmental factors, supply of microalgae seeds and monitoring of microalgal growth. An extensive list of bioreactors and their working volumes used, elemental composition of some well-known formulated cultivation media, different types of wastewater used for microalgal cultivation and environmental variables studied in microalgae research has been compiled in this review from the vast literature. This review also highlights existing challenges and knowledge gaps in upstream processing of microalgae and future research needs are suggested.