Biofouling effects on the performance of microbial fuel cells and recent advances in biotechnological and chemical strategies for mitigation

Sorting Out the Latest Advances in Separators and Pilot-Scale Microbial Electrochemical Systems for Wastewater Treatment: Concomitant Development, Practical Application, and Future Perspective

To date, dozens of pilot-scale microbial fuel cell (MFC) devices have been successfully developed worldwide for treating various types of wastewater. The availability and configurations of separators are determining factors for the economic feasibility, efficiency, sustainability, and operability of these devices. Thus, the concomitant advances between the separators and pilot-scale MFC configurations deserve further clarification. The analysis of separator configurations has shown that their evolution proceeds as follows: from ion-selective to ion-non-selective, from nonpermeable to permeable, and from abiotic to biotic. Meanwhile, their cost is decreasing and their availability is increasing. Notably, the novel MFCs configured with biotic separators are superior to those configured with abiotic separators in terms of wastewater treatment efficiency and capital cost. Herein, a highly comprehensive review of pilot-scale MFCs (>100 L) has been conducted, and we conclude that the intensive stack of the liquid cathode configuration is more advantageous when wastewater treatment is the highest priority. The use of permeable biotic separators ensures hydrodynamic continuity within the MFCs and simplifies reactor configuration and operation. In addition, a systemic comparison is conducted between pilot-scale MFC devices and conventional decentralized wastewater treatment processes. MFCs showed comparable cost, higher efficiency, long-term stability, and significant superiority in carbon emission reduction. The development of separators has greatly contributed to the availability and usability of MFCs, which will play an important role in various wastewater treatment scenarios in the future.

Enhancing proton transport in polyvinylidenedifluoride membranes and reducing biofouling for improved hydrogen production in microbial electrolysis cells

Hydrophilic porous membranes, exemplified by polyvinylidene fluoride (PVDF) membranes, have demonstrated significant potential for replacing ion exchange membranes in microbial electrolysis cells (MECs). Membrane fouling remains a major challenge in MECs, impeding proton transport and consequently limiting hydrogen production. This study aims to investigate a synergistic antifouling strategy for PVDF membrane through the incorporation of a coating composed of polydopamine (PDA), polyethyleneimine (PEI), and silver nanoparticles (AgNPs). The PDA-PEI-Ag@PVDF membrane not only effectively mitigates fouling through steric and electrostatic repulsion forces, but also amplifies ion transport by facilitating water diffusion and electromigration. The PDA-PEI-Ag@PVDF membrane exhibited a reduced membrane resistance of 1.01 mΩ m2 and PDA-PEI-Ag modifying PVDF membrane was found to be effective in enhancing the proton transportation of PVDF membrane. Therefore, the enhanced hydrogen production rate of 2.65 ± 0.02 m3/m3/d was achieved in PDA-PEI-Ag@PVDF-MECs.

Simultaneous Wastewater Treatment and Resources Recovery by Forward Osmosis Coupled with Microbial Fuel Cell: A Review

Osmotic microbial fuel cells (OsMFCs) with the abilities to simultaneously treat wastewater, produce clean water, and electricity provided a novel approach for the application of microbial fuel cell (MFC) and forward osmosis (FO). This synergistic merging of functions significantly improved the performances of OsMFCs. Nonetheless, despite their promising potential, OsMFCs currently receive inadequate attention in wastewater treatment, water reclamation, and energy recovery. In this review, we delved into the cooperation mechanisms between the MFC and the FO. MFC facilitates the FO process by promoting water flux, reducing reverse solute flux (RSF), and degrading contaminants in the feed solution (FS). Moreover, the water flux based on the FO principle contributed to MFC's electricity generation capability. Furthermore, we summarized the potential roles of OsMFCs in resource recovery, including nutrient, energy, and water recovery, and identified the key factors, such as configurations, FO membranes, and draw solutions (DS). We prospected the practical applications of OsMFCs in the future, including their capabilities to remove emerging pollutants. Finally, we also highlighted the existing challenges in membrane fouling, system expansion, and RSF. We hope this review serves as a useful guide for the practical implementation of OsMFCs.

Towards a new understanding of bioelectrochemical systems from the perspective of microecosystems: A critical review

Bioelectrochemical system (BES) holds promise for sustainable energy generation and wastewater treatment. The microbial communities, as the core of BES, play a crucial role in its performance, thus needing to be systematically studied. However, researches considering microbial communities in BES from an ecological perspective are limited. This review provided a comprehensive summary of the BES with special emphasis on microecological principles, commencing with the dynamic formation and succession of the microbial communities. It also clarified the intricate interspecies relationships and quorum-sensing mechanisms regulated by dominant species. Furthermore, this review addressed the crucial themes in BES-related researches on ecological processes, including growth patterns, ecological structures, and defense strategies against external disturbances. By offering this novel perspective, it would contribute to enhancing the understanding of BES-centered technologies and facilitating future research in this field.

Recent Advances in the Development of Sustainable Composite Materials used as Membranes in Microbial Fuel Cells

MFC can have dual functions; they can generate electricity from industrial and domestic effluents while purifying wastewater. Most MFC designs comprise a membrane which physically separates the cathode and anode compartments while keeping them electrically connected, playing a significant role in its efficiency. Popular commercial membranes such as Nafion, Hyflon and Zifron have excellent ionic conductivity, but have several drawbacks, mainly their prohibitive cost and non-biodegradability, preventing the large-scale application of MFC. Fabrication of composite materials that can function better at a much lower cost while also being environment-friendly has been the endeavor of few researchers over the past years. The current review aims to apprise readers of the latest trends of the past decade in fabricating composite membranes (CM) for MFC. For emphasis on environmental-friendly CM, the review begins with biopolymers, moving on to the carbon-polymer, polymer-polymer, and metal-polymer CM. Lastly, critical analysis towards technology-oriented propositions and realistic future directives in terms of strengths, weakness, opportunities, challenges (SWOC analysis) of the application of CM in MFC have been discussed for their possible large-scale use. The focus of this review is the development of hybrid materials as membranes for fuel cells, while underscoring the need for environment-friendly composites and processes.

Biofouling in Membrane Bioreactors-Mitigation and Current Status: a Review

Biological fouling as termed biofouling is caused by varied living organisms and is difficult to eliminate from the environment thus becoming a major issue during membrane bioreactors. Biofouling in membrane bioreactors (MBRs) is a crucial problem in increasing liquid pressure due to reduced pore diameter, clogging of the membrane pores, and alteration of the chemical composition of the water which greatly limits the growth of MBRs. Thus, membrane biofouling and/or microbial biofilms is a hot research topic to improve the market competitiveness of the MBR technology. Though several antibiofouling strategies (addition of bioflocculant or sponge into MBRs) came to light, biological approaches are sustainable and more practicable. Among the biological approaches, quorum sensing-based biofouling control (so-called quorum quenching) is an interesting and promising tool in combating biofouling issues in the MBRs. Several review articles have been published in the area of membrane biofouling and mitigation approaches. However, there is no single source of information about biofouling and/or biofilm formation in different environmental settings and respective problems, antibiofilm strategies and current status, quorum quenching, and its futurity. Thus, the objectives of the present review were to provide latest insights on mechanism of membrane biofouling, quorum sensing molecules, biofilm-associated problems in different environmental setting and antibiofilm strategies, special emphasis on quorum quenching, and its futurity in the biofilm/biofouling control. We believe that these insights greatly help in the better understanding of biofouling and aid in the development of sustainable antibiofouling strategies.

Cathodic biofouling control by microbial separators in air-breathing microbial fuel cells

Microbial fuel cells (MFCs) incorporating air-breathing cathodes have emerged as a promising eco-friendly wastewater treatment technology capable of operating on an energy-free basis. However, the inevitable biofouling of these devices rapidly decreases cathodic catalytic activity and also reduces the stability of MFCs during long-term operation. The present work developed a novel microbial separator for use in air-breathing MFCs that protects cathodic catalytic activity. In these modified devices, microbes preferentially grow on the microbial separator rather than the cathodic surface such that biofouling is prevented. Trials showed that this concept provided low charge transfer and mass diffusion resistance values during the cathodic oxygen reduction reaction of 4.6 ± 1.3 and 17.3 ± 6.8 Ω, respectively, after prolonged operation. The maximum power density was found to be stable at 1.06 ± 0.07 W m^-2 throughout a long-term test and the chemical oxygen demand removal efficiency was increased to 92% compared with a value of 83% for MFCs exhibiting serious biofouling. In addition, a cathode combined with a microbial separator demonstrated less cross-cathode diffusion of oxygen to the anolyte. This effect indirectly induced the growth of electroactive bacteria and produced higher currents in air-breathing MFCs. Most importantly, the present microbial separator concept enhances both the lifespan and economics of air-breathing MFCs by removing the need to replace or regenerate the cathode during long-term operation. These results indicate that the installation of a microbial separator is an effective means of stabilizing power generation and ensuring the cost-effective performance of air-breathing MFCs intended for future industrial applications.

Bioelectrochemical stability improvement by Ce-N modified carbon-based cathode in high-salt stress and mechanism research

Although microbial fuel cells (MFCs) have potential for high-salt wastewater treatment, their application is limited by poor salt tolerance, deactivation and unstable catalytic performance. This study designed Ce-C, N-C, and Ce-N modified activated carbon (Ce-N-C) based on the catalytic mechanism and salt tolerance performance of Ce and N elements to address these limitations. With activated carbon (AC) as the control, this study analyzed the stability of the four cathodes under different salinity environments using norfloxacin (NOR) as a probe to assess the effect of cathodes and salinity on MFC degradation performance. After three months, comparing with other three cathodes, the Ce-N-C cathode demonstrated superior and stable electrochemical and power generation performance. In particular, the advantages of Ce-N-C in high-salt (600 mM NaCl) environment is more significant than no-salt or low-salt. The potential of Ce-N-C-End at current density of 0 was 14.0% higher than AC-End, and the power density of the MFC with Ce-N-C cathode was 105.7 mW/m², which was 3.1 times higher than AC. Also, the stability of NOR removal under the function of Ce-N-C improved with the increase of NaCl concentration or operation time. The CeO₂(111) crystal form, N-Ce-O bond and pyridine N might be the key factors in improving the catalytic performance and salt tolerance of the Ce-N modified carbon-based cathode using XPS and XRD analysis.

Characterization and application of novel fly ash blended ceramic membrane in MFC for low-cost and sustainable wastewater treatment and power generation

Field-scale application of the microbial fuel cell (MFC) technology faces a major constraint due to the widely used high-cost proton exchange membrane Nafion, prompting lately, the development of ceramic membranes using different clay minerals. In the present study, the characteristics and applicability of a novel ceramic membrane fabricated using potter's clay (C) blended with varying proportions (0, 5, 10, and 20 wt%) of fly ash (FA), designated as CFA₀, CFA₅, CFA₁₀, and CFA₂₀, were assessed for cost-effective and sustainable use in MFC. On assessing the properties of the membrane, CFA₁₀ was found to exhibit superior quality with fine pore size distribution (average 0.49 μm) favoring higher water uptake and less oxygen diffusion. The CFA₁₀ membrane showed a maximum proton mass transfer coefficient (4.32 ± 0.04 × 10^-5 cm/s) that was about three times that of the control CFA₀. The oxygen mass transfer coefficient of CFA₁₀ was 5.13 ± 0.12 × 10^-5 cm/s, which was about 40% less than in the control. X-ray diffraction (XRD) analysis of CFA membrane revealed the richness of quartz, which facilitates proton conductance and water retention. The CFA₁₀ membrane fitted MFC demonstrated a peak power output of 4.57 W/m³ (twice that in CFA₀) with an average of 80.02 ± 0.86% COD removal and 68.03 ± 0.13% coulombic efficiency in a long-term study indicating its improved applicability and durability. Electrochemical kinetics involving cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS) also affirmed the efficacy of CFA₁₀ membrane in MFC showing peak current output of 13.95 mA and low ohmic resistance (74.2 Ω). The novel (CFA₁₀) ceramic membrane amalgamated with the coal fly ash, a waste of concern, shows promise for high MFC performance at a much reduced (98% less) cost that can be used for sustainable scale-up of the technology.

Effect of Sulfonated Inorganic Additives Incorporated Hybrid Composite Polymer Membranes on Enhancing the Performance of Microbial Fuel Cells

Microbial fuel cells (MFCs) provide considerable benefits in the energy and environmental sectors for producing bioenergy during bioremediation. Recently, new hybrid composite membranes with inorganic additives have been considered for MFC application to replace the high cost of commercial membranes and improve the performances of cost-effective polymers, such as MFC membranes. The homogeneous impregnation of inorganic additives in the polymer matrix effectively enhances the physicochemical, thermal, and mechanical stabilities and prevents the crossover of substrate and oxygen through polymer membranes. However, the typical incorporation of inorganic additives in the membrane decreases the proton conductivity and ion exchange capacity. In this critical review, we systematically explained the impact of sulfonated inorganic additives (such as (sulfonated) sSiO₂, sTiO₂, sFe₃O₄, and s-graphene oxide) on different kinds of hybrid polymers (such as PFSA, PVDF, SPEEK, SPAEK, SSEBS, and PBI) membrane for MFC applications. The membrane mechanism and interaction between the polymers and sulfonated inorganic additives are explained. The impact of sulfonated inorganic additives on polymer membranes is highlighted based on the physicochemical, mechanical, and MFC performances. The core understandings in this review can provide vital direction for future development.

Accelerating anaerobic digestion process with novel single chamber microbial electrochemical systems with baffle

A newly designed microbial electrochemical system (MES) with the addition of a baffle between the electrodes was integrated with the anaerobic digestion (AD) process for biogas upgradation. Novel MES configuration attained an increased methane production rate of 292.6 mL/L∙d and methane yield of 0.36 ± 0.006 [Formula: see text] /g_COD, which were higher than the values (185.3 mL/L∙d and 0.33 ± 0.009 [Formula: see text] /g_COD) from the MES operation without baffle, respectively. Moreover, the MES with baffle operation resulted in increased substrate removal (88.4 ± 0.5%) and less volatile fatty acids accumulation with a high energy efficiency of 99.6 %. Microbial community analysis revealed that acids metabolizing bacteria, Firmicutes, and Methanothrix were highly enriched in the cathode biofilm of MES with baffle. This study suggests that the baffle addition into the single chamber MES is beneficial to further improve the methanogenesis process for practical applications in the scaled-up MES-AD process.

Contribution of configurations, electrode and membrane materials, electron transfer mechanisms, and cost of components on the current and future development of microbial fuel cells

Microbial fuel cells (MFCs) are a technology that can be applied to both the wastewater treatment and bioenergy generation. This work discusses the contribution of improvements regarding the configurations, electrode materials, membrane materials, electron transfer mechanisms, and materials cost on the current and future development of MFCs. Analysis of the most recent scientific publications on the field denotes that dual-chamber MFCs configuration offers the greatest potential due to the excellent ability to be adapted to different operating environments. Carbon-based materials show the best performance, biocompatibility of carbon-brush anode favors the formation of the biofilm in a mixed consortium and in wastewater as a substrate resembles the conditions of real scenarios. Carbon-cloth cathode modified with nanotechnology favors the conductive properties of the electrode. Ceramic clay membranes emerge as an interesting low-cost membrane with a proton conductivity of 0.0817 S cm^-1, close to that obtained with the Nafion membrane. The use of nanotechnology in the electrodes also enhances electron transfer in MFCs. It increases the active sites at the anode and improves the interface with microorganisms. At the cathode, it favors its catalytic properties and the oxygen reduction reaction. These features together favor MFCs performance through energy production and substrate degradation with values above 2.0 W m^-2 and 90% respectively. All the recent advances in MFCs are gradually contributing to enable technological alternatives that, in addition to wastewater treatment, generate energy in a sustainable manner. It is important to continue the research efforts worldwide to make MFCs an available and affordable technology for industry and society.

Microbial fuel cells for mineralization and decolorization of azo dyes: Recent advances in design and materials

Microbial fuel cells (MFCs) exhibit tremendous potential in the sustainable management of dye wastewater via degrading azo dyes while generating electricity. The past decade has witnessed advances in MFC configurations and materials; however, comprehensive analyses of design and material and its association with dye degradation and electricity generation are required for their industrial application. MFC models with high efficiency of dye decolorization (96-100%) and a wide variation in power generation (29.4-940 mW/m²) have been reported. However, only 28 out of 104 studies analyzed dye mineralization - a prerequisite to obviate dye toxicity. Consequently, the current review aims to provide an in-depth analysis of MFCs potential in dye degradation and mineralization and evaluates materials and designs as crucial factors. Also, structural and operation parameters critical to large-scale applicability and complete mineralization of azo dye were evaluated. Choice of materials, i.e., bacteria, anode, cathode, cathode catalyst, membrane, and substrate and their effects on power density and dye decolorization efficiency presented in review will help in economic feasibility and MFCs scalability to develop a self-sustainable solution for treating azo dye wastewater.

Prevention and removal of membrane and separator biofouling in bioelectrochemical systems - a comprehensive review

Bioelectrochemical systems (BESs) have made significant progress in recent years in all aspects of their technology. BESs usually work with a membrane or a separator, which is one of their most critical components affecting performance. Quite often, biofilm from either the anolyte or catholyte forms on the membrane, which can negatively affect its performance. In critical cases, the long-term power performance observed for microbial fuel cells (MFCs) has dropped by over 90%. Surface modification and composite material approaches as well as chemical and physical cleaning techniques involving surfactants, acids, hydroxides, and ultrasounds have been successfully implemented to combat biofilm formation. Surface modifications produced up to 6–7 times higher power performance in the long-term, whereas regeneration strategies resulted in up to 100% recovery of original performance. Further studies include tools such as fluid dynamics-based design and plasma cleaning. The biofouling area is still underexplored in the field of bioelectrochemistry and requires systematic improvement. Therefore, this review summarizes the most recent knowledge with the aim of helping the research and engineering community select the best strategy and discuss further perspectives for combating the undesirable biofilm.

A critical review on microbe-electrode interactions towards heavy metal ion detection using microbial fuel cell technology

Implicit interaction of electroactive microbes with solid electrodes is an interesting phenomenon in nature, which supported development of bioelectrochemical systems (BESs), especially the microbial fuel cell (MFCs) for valorization of low-value waste streams into bioelectricity. Intriguingly, the metabolism of interacted microbes with electrode is affected by the microenvironment at electrodes, which influences the current response. For instance, when heavy metal ions (HMIs) are imposed in the medium, the current production decreases due to their intrinsic toxic effect. This event provides an immense opportunity to utilize MFC as a sensor to selectively detect HMIs in the environment, which has been explored vastly in recent decade. In this review, we have concisely discussed the microbial interaction with electrodes and mechanism of detection of HMIs using an MFC. Recent advancement in sensing elements and their application is elaborated with a future perspective section for follow-up research and development in this field.

Dark fermentation: Production and utilization of volatile fatty acid from different wastes- A review

Volatile fatty acids (VFAs) are the building blocks of the chemical industry, and they are the primary contributors to the planet's organic carbon cycle. VFA production from fossil fuels (mostly petroleum) is unsustainable, pollutes the environment, and generates greenhouse gases. As a result of these issues, there is a pressing need to develop alternate sources for the long-term generation of VFAs via anaerobic digestion. The accessible feedstocks for its sustainable production, as well as the influencing parameters, are discussed in this review. The use of VFAs as a raw material to make a variety of consumer products is reviewed in order to find a solution. It also bridges the gap between traditional and advanced VFA production and utilization methods from a variety of solid and liquid waste sources for economical stability.

B-doped graphene quantum dots implanted into bimetallic organic framework as a highly active and robust cathodic catalyst in the microbial fuel cell

Developing efficient and durable oxygen reduction reaction (ORR) cathodic catalysts plays an essential role in application of microbial fuel cells (MFCs). Herein, the B-doped graphene quantum dots implanted into bimetallic organic framework (BGQDs/MOF-t) are fabricated by a facile electro-deposition. Results show that, the in-situ growth of FeCoMOF on nickel foam can effectively assist construction of nanoflowers with compact connections, thus improves the conductivity. More importantly, this nano-network can serve as the template for the implantation of BGQDs through powerful interface of M-O-C bonding, avoiding π-π rearrangement and providing efficient charge transfer and abundant edge active sites. Benefitting from the enhanced electrode/electrolyte transport interface, abundant catalytic sites and low charge transfer resistance, the BGQDs/MOF-15 exhibits excellent ORR activity, superior to commercial Pt/C catalyst. In the MFC with the BGQDs/MOF-15 cathode, the maximum power density of 703.55 mW m^-2 is achieved, which is 1.53 times of that of the Pt/C cathode. In addition, the BGQDs/MOF-15 cathode maintains great stability over 800 h, while that of Pt/C reduces to 61% of the initial voltage. This work opens new opportunities for developing efficient and durable MOF-derived ORR catalyst.

Bio-electrochemical frameworks governing microbial fuel cell performance: technical bottlenecks and proposed solutions

Microbial fuel cells (MFCs) are recognized as a future technology with a unique ability to exploit metabolic activities of living microorganisms for simultaneous conversion of chemical energy into electrical energy. This technology holds the promise to offer sustained innovations and continuous development towards many different applications and value-added production that extends beyond electricity generation, such as water desalination, wastewater treatment, heavy metal removal, bio-hydrogen production, volatile fatty acid production and biosensors. Despite these advantages, MFCs still face technical challenges in terms of low power and current density, limiting their use to powering only small-scale devices. Description of some of these challenges and their proposed solutions is demanded if MFCs are applied on a large or commercial scale. On the other hand, the slow oxygen reduction process (ORR) in the cathodic compartment is a major roadblock in the commercialization of fuel cells for energy conversion. Thus, the scope of this review article addresses the main technical challenges of MFC operation and provides different practical approaches based on different attempts reported over the years.

Sustainable operation requires addressing key MFC-bottleneck issues. Enhancing extracellular electron transfer is the key to elevated MFC performance.

Efficiency, operational stability and biofouling of novel sulfomethylated polystyrene-block-poly(ethylene-ran-butylene)-block-polystyrene cation exchange membrane in microbial fuel cells

In this work, a novel cation exchange membrane, PSEBS SU22 was deployed in microbial fuel cells (MFCs) to examine system efficacy in line with membrane characteristics and inoculum source. It turned out that compared to a reference membrane (Nafion), employing PSEBS SU22 resulted in higher current density and electricity generation kinetics, while the electron recoveries were similar (19-28%). These outcomes indicated more beneficial ion transfer features and lower mass transfer-related losses in the PSEBS SU22-MFCs, supported by membrane water uptake, ion exchange capacity, ionic conductivity and permselectivity. By re-activating the membranes after (bio)foulant removal, PSEBS SU22 regained nearly its initial conductivity, highlighting a salient functional stability. Although the particular inoculum showed a clear effect on the microbial composition of the membrane biofouling layers, the dominance of aerobic species was revealed in all cases. Considering all the findings, the PSEBS SU22 seems to be promising for application in MFCs.

State-of-the-art management technologies of dissolved methane in anaerobically-treated low-strength wastewaters: A review

The recent advancement in low temperature anaerobic processes shows a great promise for realizing low-energy-cost, sustainable mainstream wastewater treatment. However, the considerable loss of the dissolved methane from anaerobically-treated low-strength wastewater significantly compromises the energy potential of the anaerobic processes and poses an environmental risk. In this review, the promises and challenges of existing and emerging technologies for dissolved methane management are examined: its removal, recovery, and on-site reuse. It begins by describing the working principles of gas-stripping and biological oxidation for methane removal, membrane contactors and vacuum degassers for methane recovery, and on-site biological conversion of dissolved methane into electricity or value-added biochemicals as direct energy sources or energy-compensating substances. A comparative assessment of these technologies in the three categories is presented based on methane treating efficiency, energy-production potential, applicability, and scalability. Finally, current research needs and future perspectives are highlighted to advance the future development of an economically and technically sustainable methane-management technology.

Antimicrobial Ceramic Filters for Water Bio-Decontamination

Bio-contamination of water through biofouling, which involves the natural colonization of submerged surfaces by waterborne organisms, is a global socio-economic concern, allied to premature materials bio-corrosion and high human health risks. Most effective strategies release toxic and persistent disinfectant compounds into the aquatic medium, causing environmental problems and leading to more stringent legislation regarding their use. To minimize these side effects, a newly non-biocide-release coating strategy suitable for several polymeric matrices, namely polydimethylsiloxane and polyurethane (PU)-based coatings, was used to generate antimicrobial ceramic filters for water bio-decontamination. The best results, in terms of antimicrobial activity and biocide release, showed an expressed delay and a decrease of up to 66% in the population of methicillin-resistant Staphylococcus aureus bacteria on ceramic filters coated with polyurethane (PU)-based coatings containing grafted Econea biocide, and no evidence of biocide release after being submerged for 45 days in water. Biocidal PU-based surfaces were also less prone to Enterococcus faecalis biofilm formation under flow conditions with an average reduction of 60% after 48 h compared to a pristine PU-based surface. Biocidal coated filters show to be a potential eco-friendly alternative for minimizing the environmental risks associated with biofouling formation in water-based industrial systems.

An insight into the bioelectrochemical photoreduction of CO2 to value-added chemicals

Goal of sustainable carbon neutral economy can be achieved by designing an efficient CO₂ reduction system to generate biofuels, in particular, by mimicking the mechanism of natural photosynthesis using semiconducting nanomaterials interfaced with electroactive bacteria (EAB) in a photosynthetic microbial electrosynthesis (PMES) system. This review paper presents an overview of the recent advancements in the biohybrid photoanode and photocathode materials. We discuss the reaction mechanism observed at photoanode and photocathode to enhance our understanding on the solar driven MES. We extend the discussion by showcasing the potential activity of EABs toward high selectivity and production rates for desirable products by manipulating their genomic sequence. Additionally, the critical challenges associated in scaling up the PMES system including the strategies for diminution of reactive oxygen species, low solubility of CO₂ in the typical electrolytes, low selectivity of product species are presented along with the suggestions of alternative strategies to achieve economically viable generation of (bio)commodities.

Performance evaluation of algae assisted microbial fuel cell under outdoor conditions

This study reports for the first time an operation of an outdoor algae assisted Microbial Fuel Cell (MFC). The MFC (10 L) comprised of low-cost materials like rock phosphate blended clayware & low-density polyethylene bags as anodic & cathodic chamber respectively. Algae biomass after lipid extraction at 2 g/l served as electron donor at the anode. Chlorella vulgaris at cathode provided oxygen as electron acceptor and served as lipid source. The MFCs performed well in all aspects namely energy recovery, algae productivity, and cost of operation. The 5% RP-MFCs gave 0.307 kg/m³d algal productivity, 0.09 kg/m³d lipid productivity, and 11.5318 kWh/m³ of net energy recovery (NER). Rock phosphate served as a slow and constant source of phosphorus supporting algae growth. Proteobacteria (45.14%) were the dominant phyla while Alicyliphilus (5.46%) and Dechloromonas (4.74%) were the dominant genera at the anode. The estimated cost of the system was $11.225 only.

Biosurfactants and Synthetic Surfactants in Bioelectrochemical Systems: A Mini-Review

Bioelectrochemical systems (BESs) are ruled by a complex combination of biological and abiotic factors. The interplay of these factors determines the overall efficiency of BES in generating electricity and treating waste. The recent progress in bioelectrochemistry of BESs and electrobiotechnology exposed an important group of compounds, which have a significant contribution to operation and efficiency: surface-active agents, also termed surfactants. Implementation of the interfacial science led to determining several effects of synthetic and natural surfactants on BESs operation. In high pH, these amphiphilic compounds prevent the cathode electrodes from biodeterioration. Through solubilization, their presence leads to increased catabolism of hydrophobic compounds. They interfere with the surface of the electrodes leading to improved biofilm formation, while affecting its microarchitecture and composition. Furthermore, they may act as quorum sensing activators and induce the synthesis of electron shuttles produced by electroactive bacteria. On the other hand, the bioelectrochemical activity can be tailored for new, improved biosurfactant production processes. Herein, the most recent knowledge on the effects of these promising compounds in BESs is discussed.

Development and Application of Supported Ionic Liquid Membranes in Microbial Fuel Cell Technology: A Concise Overview

Membrane separators are key elements of microbial fuel cells (MFCs), especially of those constructed in a dual-chamber configuration. Until now, membranes made of Nafion have been applied the most widely to set-up MFCs. However, there is a broader agreement in the literature that Nafion is expensive and in many cases, does not meet the actual (mainly mass transfer-specific) requirements demanded by the process and users. Driven by these issues, there has been notable progress in the development of alternative materials for membrane fabrication, among which those relying on the deployment of ionic liquids are emerging. In this review, the background of and recent advances in ionic liquid-containing separators, particularly supported ionic liquid membranes (SILMs), designed for MFC applications are addressed and evaluated. After an assessment of the basic criteria to be fulfilled by membranes in MFCs, experiences with SILMs will be outlined, along with important aspects of transport processes. Finally, a comparison with the literature is presented to elaborate on how MFCs installed with SILM perform relative to similar systems assembled with other, e.g., Nafion, membranes.

Potential applications of algae in the cathode of microbial fuel cells for enhanced electricity generation with simultaneous nutrient removal and algae biorefinery: Current status and future perspectives

Production of biofuels and other value-added products from wastewater along with quality treatment is an uttermost necessity to achieve environmental sustainability and promote bio-circular economy. Algae-Microbial fuel cell (A-MFC) with algae in cathode chamber offers several advantages e.g. photosynthetic oxygenation for electricity recovery, CO₂-fixation, wastewater treatment, etc. However, performance of A-MFC depends on several operational parameters and also on electrode materials types; therefore, enormous collective efforts have been made by researchers for finding optimal conditions in order to enhance A-MFC performance. The present review is a comprehensive snapshot of the recent advances in A-MFCs, dealing two major parts: 1) the power generation, which exclusively outlines the effect of different parameters and development of cutting edge cathode materials and 2) wastewater treatment at cathode of A-MFC. This review provides fundamental knowledge, critical constraints, current status and some insights for making A-MFC technology a reality at commercial scale operation.

Azadirachta indica leaf-extract-assisted synthesis of CoO–NiO mixed metal oxide for application in a microbial fuel cell as a cathode catalyst

In this study, a highly efficient yet low-cost mixed transition metal oxide of Ni and Co as CoO–NiO was synthesized using Azadirachta indica leaf extract as a bioactive chelating agent.