Variations in the ratios of co-cultured mesenchymal stem cells and chondrocytes regulate the expression of cartilaginous and osseous phenotype in alginate constructs

The application and progress of tissue engineering and biomaterial scaffolds for total auricular reconstruction in microtia

Microtia is a congenital deformity of the ear with an incidence of about 0.8-4.2 per 10,000 births. Total auricular reconstruction is the preferred treatment of microtia at present, and one of the core technologies is the preparation of cartilage scaffolds. Autologous costal cartilage is recognized as the best material source for constructing scaffold platforms. However, costal cartilage harvest can lead to donor-site injuries such as pneumothorax, postoperative pain, chest wall scar and deformity. Therefore, with the need of alternative to autologous cartilage, in vitro and in vivo studies of biomaterial scaffolds and cartilage tissue engineering have gradually become novel research hot points in auricular reconstruction research. Tissue-engineered cartilage possesses obvious advantages including non-rejection, minimally invasive or non-invasive, the potential of large-scale production to ensure sufficient donors and controllable morphology. Exploration and advancements of tissue-engineered cartilaginous framework are also emerging in aspects including three-dimensional biomaterial scaffolds, acquisition of seed cells and chondrocytes, 3D printing techniques, inducing factors for chondrogenesis and so on, which has greatly promoted the research process of biomaterial substitute. This review discussed the development, current application and research progress of cartilage tissue engineering in auricular reconstruction, particularly the usage and creation of biomaterial scaffolds. The development and selection of various types of seed cells and inducing factors to stimulate chondrogenic differentiation in auricular cartilage were also highlighted. There are still confronted challenges before the clinical application becomes widely available for patients, and its long-term effect remains to be evaluated. We hope to provide guidance for future research directions of biomaterials as an alternative to autologous cartilage in ear reconstruction, and finally benefit the transformation and clinical application of cartilage tissue engineering and biomaterials in microtia treatment.

Treatment with Mesenchymal Stem Cell-Derived Nanovesicle-Containing Gelatin Methacryloyl Hydrogels Alleviates Osteoarthritis by Modulating Chondrogenesis and Macrophage Polarization

Osteoarthritis is a degenerative disorder that can severely affect joints, and new treatment strategies are urgently needed. Administration of mesenchymal stem cell (MSC)-derived exosomes is a promising therapeutic strategy in osteoarthritis treatment. However, the poor yield of exosomes is an obstacle to the use of this modality in the clinic. Herein, a promising strategy is developed to fabricate high-yield exosome-mimicking MSC-derived nanovesicles (MSC-NVs) with enhanced regenerative and anti-inflammatory capabilities. MSC-NVs are prepared using an extrusion approach and are found to increase chondrocyte and human bone marrow MSC differentiation, proliferation, and migration, in addition to inducing M2 macrophage polarization. Furthermore, gelatin methacryloyl (GelMA) hydrogels loaded with MSC-NVs (GelMA-NVs) are formulated, which exhibit sustained release of MSC-NVs and are shown to be biocompatible with excellent mechanical properties. In a mouse osteoarthritis model constructed by surgical destabilization of the medial meniscus (DMM), GelMA-NVs effectively ameliorate osteoarthritis severity, reduce the secretion of catabolic factors, and enhance matrix synthesis. Furthermore, GelMA-NVs induce M2 macrophage polarization and inflammatory response inhibition in vivo. The findings demonstrate that GelMA-NVs hold promise for osteoarthritis treatment through modulation of chondrogenesis and macrophage polarization.

Cartilage 3D bioprinting for rhinoplasty using adipose-derived stem cells as seed cells: Review and recent advances

Nasal deformities due to various causes affect the aesthetics and use of the nose, in which case rhinoplasty is necessary. However, the lack of cartilage for grafting has been a major problem and tissue engineering seems to be a promising solution. 3D bioprinting has become one of the most advanced tissue engineering methods. To construct ideal cartilage, bio-ink, seed cells, growth factors and other methods to promote chondrogenesis should be considered and weighed carefully. With continuous progress in the field, bio-ink choices are becoming increasingly abundant, from a single hydrogel to a combination of hydrogels with various characteristics, and more 3D bioprinting methods are also emerging. Adipose-derived stem cells (ADSCs) have become one of the most popular seed cells in cartilage 3D bioprinting, owing to their abundance, excellent proliferative potential, minimal morbidity during harvest and lack of ethical considerations limitations. In addition, the co-culture of ADSCs and chondrocytes is commonly used to achieve better chondrogenesis. To promote chondrogenic differentiation of ADSCs and construct ideal highly bionic tissue-engineered cartilage, researchers have used a variety of methods, including adding appropriate growth factors, applying biomechanical stimuli and reducing oxygen tension. According to the process and sequence of cartilage 3D bioprinting, this review summarizes and discusses the selection of hydrogel and seed cells (centered on ADSCs), the design of printing, and methods for inducing the chondrogenesis of ADSCs.

The effect of multi-material architecture on the ex vivo osteochondral integration of bioprinted constructs

Extrusion bioprinted constructs for osteochondral tissue engineering were fabricated to study the effect of multi-material architecture on encapsulated human mesenchymal stem cells' tissue-specific matrix deposition and integration into an ex vivo porcine osteochondral explant model. Two extrusion fiber architecture groups with differing transition regions and degrees of bone- and cartilage-like bioink mixing were employed. The gradient fiber (G-Fib) architecture group showed an increase in chondral integration over time, 18.5 ± 0.7 kPa on Day 21 compared to 9.6 ± 1.6 kPa on Day 1 for the required peak push-out force, and the segmented fiber (S-Fib) architecture group did not, which corresponded to the increase in sulfated glycosaminoglycan deposition noted only in the G-Fib group and the staining for cellularity and tissue-specific matrix deposition at the fiber-defect boundary. Conversely, the S-Fib architecture was associated with significant mineralization over time, but the G-Fib architecture was not. Notably, both fiber groups also had similar chondral integration as a re-inserted osteochondral tissue control. While architecture did dictate differences in the cells' responses to their environment, architecture was not shown to distinguish a statistically significant difference in tissue integration via fiber push-out testing within a given time point or explant region. Use of this three-week osteochondral model demonstrates that these bioink formulations support the fabrication of cell-laden constructs that integrate into explanted tissue as capably as natural tissue and encapsulate osteochondral matrix-producing cells, and it also highlights the important role that spatial architecture plays in the engineering of multi-phasic tissue environments. STATEMENT OF SIGNIFICANCE: Here, an ex vivo model was used to interrogate fundamental questions about the effect of multi-material scaffold architectural choices on osteochondral tissue integration. Cell-encapsulating constructs resembling stratified osteochondral tissue were 3D printed with architecture consisting of either gradient transitions or segmented transitions between the bone-like and cartilage-like bioink regions. The printed constructs were assessed alongside re-inserted natural tissue plugs via mechanical tissue integration push-out testing, biochemical assays, and histology. Differences in osteochondral matrix deposition were observed based on architecture, and both printed groups demonstrated cartilage integration similar to the native tissue plug group. As 3D printing becomes commonplace within biomaterials and tissue engineering, this work illustrates critical 3D co-culture interactions and demonstrates the importance of considering architecture when interpreting the results of studies utilizing spatially complex, multi-material scaffolds.

Physical and Soluble Cues Enhance Tendon Progenitor Cell Invasion into Injectable Synthetic Hydrogels

Synthetic hydrogels represent an exciting avenue in the field of regenerative biomaterials given their injectability, orthogonally tunable mechanical properties, and potential for modular inclusion of cellular cues. Separately, recent advances in soluble factor release technology have facilitated control over the soluble milieu in cell microenvironments via tunable microparticles. A composite hydrogel incorporating both of these components can robustly mediate tendon healing following a single injection. Here, a synthetic hydrogel system with encapsulated electrospun fiber segments and a novel microgel-based soluble factor delivery system achieves precise control over topographical and soluble features of an engineered microenvironment, respectively. It is demonstrated that three-dimensional migration of tendon progenitor cells can be enhanced via combined mechanical, topographical, and microparticle-delivered soluble cues in both a tendon progenitor cell spheroid model and an ex vivo murine Achilles tendon model. These results indicate that fiber reinforced hydrogels can drive the recruitment of endogenous progenitor cells relevant to the regeneration of tendon and, likely, a broad range of connective tissues.

Tissue Engineering for Tracheal Replacement: Strategies and Challenges

The critical feature in trachea replacement is to provide a hollow cylindrical framework that is laterally stable and longitudinally flexible, facilitating cartilage and epithelial tissue formation. Despite advanced techniques and sources of materials used, most inherent challenges are related to the complexity of its anatomy. Limited blood supply leads to insufficient regenerative capacity for cartilage and epithelium. Natural and synthetic scaffolds, different types of cells, and growth factors are part of tissue engineering approaches with varying outcomes. Pre-vascularization remains one of the crucial factors to expedite the regenerative process in tracheal reconstruction. This review discusses the challenges and strategies used in tracheal tissue engineering, focusing on scaffold implantation in clinical and preclinical studies conducted in recent decades.

[Research progress of different cell seeding densities and cell ratios in cartilage tissue engineering]

OBJECTIVE

To review the research progress of different cell seeding densities and cell ratios in cartilage tissue engineering.

METHODS

The literature about tissue engineered cartilage constructed with three-dimensional scaffold was extensively reviewed, and the seeding densities and ratios of most commonly used seed cells were summarized.

RESULTS

Articular chondrocytes (ACHs) and bone marrow mesenchymal stem cells (BMSCs) are the most commonly used seed cells, and they can induce hyaline cartilage formation in vitro and in vivo. Cell seeding density and cell ratio both play important roles in cartilage formation. Tissue engineered cartilage with good quality can be produced when the cell seeding density of ACHs or BMSCs reaches or exceeds that in normal articular cartilage. Under the same culture conditions, the ability of pure BMSCs to build hyaline cartilage is weeker than that of pure ACHs or co-culture of both.

CONCLUSION

Due to the effect of scaffold materials, growth factors, and cell passages, optimal cell seeding density and cell ratio need further study.

Polymeric Hydrogels as Mesenchymal Stem Cell Secretome Delivery System in Biomedical Applications

Secretomes of mesenchymal stem cells (MSCs) have been successfully studied in preclinical models for several biomedical applications, including tissue engineering, drug delivery, and cancer therapy. Hydrogels are known to imitate a three-dimensional extracellular matrix to offer a friendly environment for stem cells; therefore, hydrogels can be used as scaffolds for tissue construction, to control the distribution of bioactive compounds in tissues, and as a secretome-producing MSC culture media. The administration of a polymeric hydrogel-based MSC secretome has been shown to overcome the fast clearance of the target tissue. In vitro studies confirm the bioactivity of the secretome encapsulated in the gel, allowing for a controlled and sustained release process. The findings reveal that the feasibility of polymeric hydrogels as MSC -secretome delivery systems had a positive influence on the pace of tissue and organ regeneration, as well as an enhanced secretome production. In this review, we discuss the widely used polymeric hydrogels and their advantages as MSC secretome delivery systems in biomedical applications.

Application of Alginate Hydrogels for Next-Generation Articular Cartilage Regeneration

The articular cartilage has insufficient intrinsic healing abilities, and articular cartilage injuries often progress to osteoarthritis. Alginate-based scaffolds are attractive biomaterials for cartilage repair and regeneration, allowing for the delivery of cells and therapeutic drugs and gene sequences. In light of the heterogeneity of findings reporting the benefits of using alginate for cartilage regeneration, a better understanding of alginate-based systems is needed in order to improve the approaches aiming to enhance cartilage regeneration with this compound. This review provides an in-depth evaluation of the literature, focusing on the manipulation of alginate as a tool to support the processes involved in cartilage healing in order to demonstrate how such a material, used as a direct compound or combined with cell and gene therapy and with scaffold-guided gene transfer procedures, may assist cartilage regeneration in an optimal manner for future applications in patients.

Three-Dimensional Bioprinting Scaffolding for Nasal Cartilage Defects: A Systematic Review

BACKGROUND

In recent years, three-dimensional (3D)-printing of tissue-engineered cartilaginous scaffolds is intended to close the surgical gap and provide bio-printed tissue designed to fit the specific geometric and functional requirements of each cartilage defect, avoiding donor site morbidity and offering a personalizing therapy.

METHODS

To investigate the role of 3D-bioprinting scaffolding for nasal cartilage defects repair a systematic review of the electronic databases for 3D-Bioprinting articles pertaining to nasal cartilage bio-modelling was performed. The primary focus was to investigate cellular source, type of scaffold utilization, biochemical evaluation, histological analysis, in-vitro study, in-vivo study, animal model used, length of research, and placement of experimental construct and translational investigation.

RESULTS

From 1011 publications, 16 studies were kept for analysis. About cellular sources described, most studies used primary chondrocyte cultures. The cartilage used for cell isolation was mostly nasal septum. The most common biomaterial used for scaffold creation was polycaprolactone alone or in combination. About mechanical evaluation, we found a high heterogeneity, making it difficult to extract any solid conclusion. Regarding biological and histological characteristics of each scaffold, we found that the expression of collagen type I, collagen Type II and other ECM components were the most common patterns evaluated through immunohistochemistry on in-vitro and in-vivo studies. Only two studies made an orthotopic placement of the scaffolds. However, in none of the studies analyzed, the scaffold was placed in a subperichondrial pocket to rigorously simulate the cartilage environment. In contrast, scaffolds were implanted in a subcutaneous plane in almost all of the studies included.

CONCLUSION

The role of 3D-bioprinting scaffolding for nasal cartilage defects repair is growing field. Despite the amount of information collected in the last years and the first surgical applications described recently in humans. Further investigations are needed due to the heterogeneity on mechanical evaluation parameters, the high level of heterotopic scaffold implantation and the need for quantitative histological data.

Crosstalk Between Mesenchymal Stromal Cells and Chondrocytes: The Hidden Therapeutic Potential for Cartilage Regeneration

Cartilage injuries following trauma create a puzzling clinical scenario. The finite reparative potential of articular cartilage is well known, and injuries are associated with an increased risk of osteoarthritis. Cell-based therapies have spotlighted chondrocytes and mesenchymal stromal cells (MSCs) as the functional unit of articular cartilage and the progenitor cells, respectively. The available clinical treatments cannot reproduce the biomechanical properties of articular cartilage and call for continuous investigations into alternative approaches. Co-cultures of chondrocytes and MSCs are an attractive in vitro system to step closer to the in vivo multicellular environment's complexity. Research on the mechanisms of interaction between both cell types will reveal essential cues to understand cartilage regeneration. This review describes the latest discoveries on these interactions, along with advantages and main challenges in vitro and in vivo. The successful clinical translation of in vitro studies requires establishing rigorous standards and clinically relevant research models and an organ-targeting therapeutic strategy.

Improving In Vitro Cartilage Generation by Co-Culturing Adipose-Derived Stem Cells and Chondrocytes on an Allograft Adipose Matrix Framework

BACKGROUND

Microtia is an inherited condition that results in varying degrees of external ear deformities; the most extreme form is anotia. Effective surgical reconstruction techniques have been developed. However, these usually require multistage procedures and have other inherent disadvantages. Tissue engineering technologies offer new approaches in the field of external ear reconstruction. In this setting, chondrocytes are cultured in the laboratory with the aim of creating bioengineered cartilage matrices. However, cartilage engineering has many challenges, including difficulty in culturing sufficient chondrocytes. To overcome these hurdles, the authors propose a novel model of cartilage engineering that involves co-culturing chondrocytes and adipose-derived stem cells on an allograft adipose-derived extracellular matrix scaffold.

METHODS

Auricular chondrocytes from porcine ear were characterized. Adipose-derived stem cells were isolated and expanded from human lipoaspirate. Then, the auricular chondrocytes were cultured on the allograft adipose matrix either alone or with the adipose-derived stem cells at different ratios and examined histologically.

RESULTS

Cartilage induction was most prominent when the cells were co-cultured on the allograft adipose matrix at a ratio of 1:9 (auricular chondrocyte-to-adipose-derived stem cell ratio). Furthermore, because of the xenogeneic nature of the experiment, the authors were able to determine that the adipose-derived stem cells contributed to chondrogenesis by means of a paracrine stimulation of the chondrocytes.

CONCLUSIONS

In this situation, adipose-derived stem cells provide sufficient support to induce the formation of cartilage when the number of auricular chondrocytes available is limited. This novel model of cartilage engineering provides a setting for using the patient's own chondrocytes and adipose tissue to create a customized ear framework that could be further used for surgical reconstruction.

Combination of chondrocytes and chondrons improves extracellular matrix production to promote the repairs of defective knee cartilage in rabbits

Background

Chondrons are composed of chondrocytes and the surrounding pericellular matrix (PCM) and function to enhance chondrocyte-mediated cartilage tissue engineering. This study aimed at investigating the potential effect of combined chondrocytes with chondrons on the production of proteoglycan and collagen-II (Col-2) and the repair of defective knee cartilage in rabbits.

Methods

Chondrocytes and chondrons were isolated from the knee cartilage of rabbits, and cultured alone or co-cultured for varying periods in vitro. Their morphology was characterized by histology. The levels of aggrecan (AGG), Col-2 and glycosaminoglycan (GAG) expression were quantified by qRT-PCR, Alcian blue-based precipitation and ELISA. The effect of combined chondrocytes with chondrons in alginate spheres on the repair of defective knee cartilage was examined in rabbits.

Results

The isolated chondrocytes and chondrons displayed unique morphology and began to proliferate on day 3 and 6 post culture, respectively, accompanied by completely degenerated PCM on day 6 post culture. Evidently, chondrocytes had stronger proliferation capacity than chondrons. Longitudinal analyses indicated that culture of chondrons, but not chondrocytes, increased AGG mRNA transcripts and GAG levels with time and Col-2 mRNA transcripts only on day 3 post culture. Compared with chondrocytes or chondrons alone, co-culture of chondrocytes and chondrons significantly up-regulated AGG and Col-2 expression and GAG production, particularly at a ratio of 1:1. Implantation with chondrocytes and chondrons at 1:1 significantly promoted the repair of defective knee cartilage in rabbits, accompanied by reduced the Wakiteni scores with time.

Conclusion

Combined chondrons with chondrocytes promoted the production of extracellular matrix and the repair of defective knee cartilage in rabbits.

The translational potential of this article

This study explores that the combination of chondrons and chondrocytes may be new therapeutic strategy for cartilage tissue engineering and repair of defective cartilage.

Long-term in vivo integrity and safety of 3D-bioprinted cartilaginous constructs

Long-term stability and biological safety are crucial for translation of 3D-bioprinting technology into clinical applications. Here, we addressed the long-term safety and stability issues associated with 3D-bioprinted constructs comprising a cellulose scaffold and human cells (chondrocytes and stem cells) over a period of 10 months in nude mice. Our findings showed that increasing unconfined compression strength over time significantly improved the mechanical stability of the cell-containing constructs relative to cell-free scaffolds. Additionally, the cell-free constructs exhibited a mean compressive stress and stiffness (compressive modulus) of 0.04 ± 0.05 MPa and 0.14 ± 0.18 MPa, respectively, whereas these values for the cell-containing constructs were 0.11 ± 0.08 MPa (p = .019) and 0.53 ± 0.59 MPa (p = .012), respectively. Moreover, histomorphologic analysis revealed that cartilage formed from the cell-containing constructs harbored an abundance of proliferating chondrocytes in clusters, and after 10 months, resembled native cartilage. Furthermore, extension of the experiment over the complete lifecycle of the animal model revealed no signs of ossification, fibrosis, necrosis, or implant-related tumor development in the 3D-bioprinted constructs. These findings confirm the in vivo biological safety and mechanical stability of 3D-bioprinted cartilaginous tissues and support their potential translation into clinical applications.

Co-Culture of Adipose-Derived Stem Cells and Chondrocytes With Transforming Growth Factor-Beta 3 Promotes Chondrogenic Differentiation

Tissue engineering cartilage is a promising strategy to reconstruct the craniofacial cartilaginous defects. It demands plenty of chondrocytes to generate human-sized craniofacial frameworks. Partly replacement of chondrocytes by adipose-derived stem cells (ADSCs) can be an alternative strategy.The study aimed at evaluating the chondrogenic outcome of ADSCs and chondrocytes in direct co-culture with transforming growth factor-beta (TGF-β3). Porcine ADSCs and chondrocytes were obtained from abdominal wall and external ears. Four groups: ADSCs or chondrocytes monocultured in medium added with TGF-β3; ADSCs and ACs co-cultured with or without TGF-β3. Cell growth rate was performed to evaluate the cell proliferation. Morphological, histologic and real-time polymerase chain reaction analysis were performed to characterize the chondrogenic outcome of pellets. ADSCs had favorable multi-lineage differentiation potential. Further, when ADSCs were co-cultured with chondrocytes in medium added with TGF-β3, the cell proliferation was promoted and the chondrogenic differentiation of ADSCs was enhanced. We demonstrate that pellet co-culture of ADSCs and chondrocyte with TGF-β3 could construct high quantity cartilages. It suggests that this strategy might be useful in future cartilage repair.

Efficacy of one-stage cartilage repair using allogeneic mesenchymal stromal cells and autologous chondron transplantation (IMPACT) compared to nonsurgical treatment for focal articular cartilage lesions of the knee: study protocol for a crossover randomized controlled trial

BACKGROUND

Articular cartilage defects in the knee have poor intrinsic healing capacity and may lead to functional disability and osteoarthritis (OA). "Instant MSC Product accompanying Autologous Chondron Transplantation" (IMPACT) combines rapidly isolated recycled autologous chondrons with allogeneic MSCs in a one-stage surgery. IMPACT was successfully executed in a first-in-man investigator-driven phase I/II clinical trial in 35 patients. The purpose of this study is to compare the efficacy of IMPACT to nonsurgical treatment for the treatment of large (2-8 cm2) articular cartilage defects in the knee.

METHODS

Sixty patients will be randomized to receive nonsurgical care or IMPACT. After 9 months of nonsurgical care, patients in the control group are allowed to receive IMPACT surgery. The Knee Injury and Osteoarthritis Outcome Score (KOOS), pain (numeric rating scale, NRS), and EuroQol five dimensions five levels (EQ5D-5 L) will be used to compare outcomes at baseline and 3, 6, 9, 12, and 18 months after inclusion. Cartilage formation will be assessed at baseline, and 6 and 18 months after inclusion using MRI. An independent rheumatologist will monitor the onset of a potential inflammatory response. (Severe) adverse events will be recorded. Lastly, the difference between IMPACT and nonsurgical care in terms of societal costs will be assessed by monitoring healthcare resource use and productivity losses during the study period. A health economic model will be developed to estimate the incremental cost-effectiveness ratio of IMPACT vs. nonsurgical treatment in terms of costs per quality adjusted life year over a 5-year time horizon.

DISCUSSION

This study is designed to evaluate the efficacy of IMPACT compared to nonsurgical care. Additionally, safety of IMPACT will be assessed in 30 to 60 patients. Lastly, this study will evaluate the cost-effectiveness of IMPACT compared to nonsurgical care.

TRIAL REGISTRATION

NL67161.000.18 [Registry ID: CCMO] 2018#003470#27 [EU-CTR; registered on 26 March 2019] NCT04236739 [ ClinicalTrials.gov ] [registered after start of inclusion; 22 January 2020].

Mesenchymal stem cells and mesenchymal stem cell-derived extracellular vesicles: Potential roles in rheumatic diseases

BACKGROUND

Mesenchymal stem cells (MSCs) have been widely investigated in rheumatic disease due to their immunomodulatory and regenerative properties. Recently, mounting studies have implicated the therapeutic potency of MSCs mostly due to the bioactive factors they produce. Extracellular vesicles (EVs) derived from MSCs have been identified as a promising cell-free therapy due to low immunogenicity. Rheumatic disease, primarily including rheumatoid arthritis and osteoarthritis, is a group of diseases in which immune dysregulation and chronic progressive inflammation lead to irreversible joint damage. Targeting MSCs and MSC-derived EVs may be a more effective and promising therapeutic strategy for rheumatic diseases.

AIM

To evaluate the potential therapeutic effectiveness of MSCs and EVs generated from MSCs in rheumatic diseases.

METHODS

PubMed was searched for the relevant literature using corresponding search terms alone or in combination. Papers published in English language from January 1999 to February 2020 were considered. Preliminary screening of papers concerning analysis of "immunomodulatory function" or "regenerative function" by scrutinizing the titles and abstracts of the literature, excluded the papers not related to the subject of the article. Some other related studies were obtained by manually retrieving the reference lists of papers that comply with the selection criteria, and these studies were screened to meet the final selection and exclusion criteria.

RESULTS

Eighty-six papers were ultimately selected for analysis. After analysis of the literature, it was found that both MSCs and EVs generated from MSCs have great potential in multiple rheumatic diseases, such as rheumatoid arthritis and osteoarthritis, in repair and regeneration of tissues, inhibition of inflammatory response, and regulation of body immunity via promoting chondrogenesis, regulating innate and adaptive immune cells, and regulating the secretion of inflammatory factors. But EVs from MSCs exhibit much more advantages over MSCs, which may represent another promising cell-free restorative strategy. Targeting MSCs and MSC-derived EVs may be a more efficient treatment for patients with rheumatic diseases.

CONCLUSION

The enormous potential of MSCs and EVs from MSCs in immunomodulation and tissue regeneration offers a new idea for the treatment of rheumatism. However, more in-depth exploration is needed before their clinical application.

Enhanced chondrogenesis in a coculture system with genetically manipulated dedifferentiated chondrocytes and ATDC5 cells

Articular cartilage repair after injury is a great challenge worldwide due to its nerveless and avascular features. Tissue engineering is proposed as a promising alternative for cartilage regeneration. In this study, an adenoviral vector carrying the transforming growth factor-β3 (TGF-β3) gene was constructed and introduced into dedifferentiated chondrocytes, which were then cocultured with ATDC5 cells in an alginate hydrogel system. The results showed that the experimental groups exhibited better cell viability and higher levels of cartilage-related genes than the control groups. In this coculture system, the chondrogenic differentiation of ATDC5 cells was effectively induced by TGF-β3 and other latent cytokines that were produced by the transfected chondrocytes. Thus, this method can avoid the degradation of exogenous TGF-β3, and it can protect ATDC5 cells during virus transfection to maintain cell viability and chondrogenic differentiation capability. Taken together, this study provides fresh insights for applying this genetically manipulated coculture system to cartilage repair in the future.

Cell-to-Cell Culture Inhibits Dedifferentiation of Chondrocytes and Induces Differentiation of Human Umbilical Cord-Derived Mesenchymal Stem Cells

Background

Human umbilical cord-derived mesenchymal stem cells (hUC-MSCs) possess great promise as a therapeutic to repair damaged cartilage. Direct intra-articular injection of mesenchymal stem cells has been shown to reduce cartilage damage and is advantageous as surgical implantation and associated side effects can be avoided using this approach. However, the efficacy of stem cell-based therapy for cartilage repair depends highly on the direct interactions of these stem cells with chondrocytes in the joint. In this study, we have carried out an in vitro cell-to-cell contact coculture study with human articular chondrocytes (hACs) and hUC-MSCs, with the goal of this study being to evaluate interactions between hACs and hUC-MSCs.

Methods

Low-density monolayer cultures of hUC-MSCs and hACs were mixed at a ratio of 1 : 1 in direct cell-to-cell contact groups. Results were analyzed using quantitative reverse transcription polymerase chain reaction (qRT-PCR), western blot, enzyme-linked immunosorbent assay (ELISA), and immunofluorescence.

Results

A mixed coculture of hUC-MSCs and hACs was found to exhibit synergistic interactions with enhanced differentiation of hUC-MSCs and reduced dedifferentiation of chondrocytes. Mixed cultures after 21 days were found to exhibit sufficient chondrogenic induction.

Conclusions

The results from this study suggest the presence of mutual effects between hUC-MSCs and hACs even culture at low density and provide further support for the use of intra-articular injection strategies for cartilage defect treatment.

Three-dimensional imaging of the extracellular matrix and cell interactions in the developing prenatal mouse cornea

As the outer lens in the eye, the cornea needs to be strong and transparent. These properties are governed by the arrangement of the constituent collagen fibrils, but the mechanisms of how this develops in mammals is unknown. Using novel 3-dimensional scanning and conventional transmission electron microscopy, we investigated the developing mouse cornea, focusing on the invading cells, the extracellular matrix and the collagen types deposited at different stages. Unlike the well-studied chick, the mouse cornea had no acellular primary stroma. Collagen fibrils initially deposited at E13 from the presumptive corneal stromal cells, become organised into fibril bundles orthogonally arranged between cells. Extensive cell projections branched to adjacent stromal cells and interacted with the basal lamina and collagen fibrils. Types I, II and V collagen were expressed from E12 posterior to the surface ectoderm, and became widespread from E14. Type IX collagen localised to the corneal epithelium at E14. Type VII collagen, the main constituent of anchoring filaments, was localised posterior to the basal lamina. We conclude that the cells that develop the mouse cornea do not require a primary stroma for cell migration. The cells have an elaborate communication system which we hypothesise helps cells to align collagen fibrils.

Progress of co-culture systems in cartilage regeneration

INTRODUCTION

Cartilage tissue engineering has rapidly developed in recent decades, exhibiting promising potential to regenerate and repair cartilage. However, the origin of a large amount of a suitable seed cell source is the major bottleneck for the further clinical application of cartilage tissue engineering. The use of a monoculture of passaged chondrocytes or mesenchymal stem cells results in undesired outcomes, such as fibrocartilage formation and hypertrophy. In the last two decades, co-cultures of chondrocytes and a variety of mesenchymal stem cells have been intensively investigated in vitro and in vivo, shedding light on the perspective of co-culture in cartilage tissue engineering.

AREAS COVERED

We summarize the recent literature on the application of heterologous cell co-culture systems in cartilage tissue engineering and compare the differences between direct and indirect co-culture systems as well as discuss the underlying mechanisms.

EXPERT OPINION

Co-culture system is proven to address many issues encountered by monocultures in cartilage tissue engineering, including reducing the number of chondrocytes needed and alleviating the dedifferentiation of chondrocytes. With the further development and knowledge of biomaterials, cartilage tissue engineering that combines the co-culture system and advanced biomaterials is expected to solve the difficult problem regarding the regeneration of functional cartilage.

Co-culture of adipose-derived stem cells and chondrocytes on three-dimensionally printed bioscaffolds for craniofacial cartilage engineering

OBJECTIVES/HYPOTHESIS

Reconstruction of craniofacial cartilagenous defects are among the most challenging surgical procedures in facial plastic surgery. Bioengineered craniofacial cartilage holds immense potential to surpass current reconstructive options, but limitations to clinical translation exist. We endeavored to determine the viability of utilizing adipose-derived stem cell-chondrocyte co-culture and three-dimensional (3D) printing to produce 3D bioscaffolds for cartilage tissue engineering. We describe a feasibility study revealing a novel approach for cartilage tissue engineering with in vitro and in vivo animal data.

METHODS

Porcine adipose-derived stem cells and chondrocytes were isolated and co-seeded at 1:1, 2:1, 5:1, 10:1, and 0:1 experimental ratios in a hyaluronic acid/collagen hydrogel in the pores of 3D-printed polycaprolactone scaffolds to form 3D bioscaffolds for cartilage tissue engineering. Bioscaffolds were cultured in vitro without growth factors for 4 weeks and then implanted into the subcutaneous tissue of athymic rats for an additional 4 weeks before sacrifice. Bioscaffolds were subjected to histologic, immunohistochemical, and biochemical analysis.

RESULTS

Successful production of cartilage was achieved using a co-culture model of adipose-derived stem cells and chondrocytes without the use of exogenous growth factors. Histology demonstrated cartilage growth for all experimental ratios at the post-in vivo time point confirmed with type II collagen immunohistochemistry. There was no difference in sulfated-glycosaminoglycan production between experimental groups.

CONCLUSION

Tissue-engineered cartilage was successfully produced on 3D-printed bioresorbable scaffolds using an adipose-derived stem cell and chondrocyte co-culture technique. This potentiates co-culture as a solution for several key barriers to a clinically translatable cartilage tissue engineering process.

LEVEL OF EVIDENCE

NA. Laryngoscope, 128:E251-E257, 2018.

An Investigation on the Regenerative Effects of Intra Articular Injection of Co-Cultured Adipose Derived Stem Cells with Chondron for Treatment of Induced Osteoarthritis

Purpose: Adipose tissue derived stem cells (ASCs) and chondrocytes are best cells for articular cartilage regeneration. Chondrocyte with peri-cellular matrix (PCM) is called chondron provides ideal microenviroment than chondrocytes. We aimed to evaluate the regenerative effects of intra-articular injection of ASCs co-cultures with chondron in induced osteoarthritis (OA).

Methods: ASC, from the peri-renal fat of male rat and chondron from primary newborn rat hyaline cartilage were isolated. ASCs were cultured for at least three passages in vitro. Six weeks after OA induction, rats were randomly distributed in five groups of control, osteoarthritic, ASC, chondron and co-cultured. ASCs (10⁷), chondrons (10⁷) and combination of chondrons and ASCs (10⁷) were injected into intra-articular space of the rat knee. The effect of treatments was evaluated by macroscopic and microscopic examinations. The expression levels of collagen type ΙΙ was studied by immunohistochemistry.

Results: Macroscopic appearance of the co-cultured group, showed much enhanced articular cartilage regeneration compared to ASC and chondron groups. H&E showed evidence of repair site of articular surface without erosion and fibrillation versus OA group which showed thin layer of hyaline cartilage over tidemark and spontaneous fibrocartilage formation. Metachromatic regions stained with toluidine blue were larger in treatment groups versus OA group. Strong intensity of type ΙΙ collagen staining was observed in co-culture group compared to other groups.

Conclusion: Co-culture of chondrons and ASCs increased articular hyaline cartilage formation and provides a useful tool to improve limitations of each of applied cells in this model.

Trophic effects of adipose-tissue-derived and bone-marrow-derived mesenchymal stem cells enhance cartilage generation by chondrocytes in co-culture

AIMS

Combining mesenchymal stem cells (MSCs) and chondrocytes has great potential for cell-based cartilage repair. However, there is much debate regarding the mechanisms behind this concept. We aimed to clarify the mechanisms that lead to chondrogenesis (chondrocyte driven MSC-differentiation versus MSC driven chondroinduction) and whether their effect was dependent on MSC-origin. Therefore, chondrogenesis of human adipose-tissue-derived MSCs (hAMSCs) and bone-marrow-derived MSCs (hBMSCs) combined with bovine articular chondrocytes (bACs) was compared.

METHODS

hAMSCs or hBMSCs were combined with bACs in alginate and cultured in vitro or implanted subcutaneously in mice. Cartilage formation was evaluated with biochemical, histological and biomechanical analyses. To further investigate the interactions between bACs and hMSCs, (1) co-culture, (2) pellet, (3) Transwell® and (4) conditioned media studies were conducted.

RESULTS

The presence of hMSCs-either hAMSCs or hBMSCs-increased chondrogenesis in culture; deposition of GAG was most evidently enhanced in hBMSC/bACs. This effect was similar when hMSCs and bAC were combined in pellet culture, in alginate culture or when conditioned media of hMSCs were used on bAC. Species-specific gene-expression analyses demonstrated that aggrecan was expressed by bACs only, indicating a predominantly trophic role for hMSCs. Collagen-10-gene expression of bACs was not affected by hBMSCs, but slightly enhanced by hAMSCs. After in-vivo implantation, hAMSC/bACs and hBMSC/bACs had similar cartilage matrix production, both appeared stable and did not calcify.

CONCLUSIONS

This study demonstrates that replacing 80% of bACs by either hAMSCs or hBMSCs does not influence cartilage matrix production or stability. The remaining chondrocytes produce more matrix due to trophic factors produced by hMSCs.

Chondrocytes and stem cells in 3D-bioprinted structures create human cartilage in vivo

Cartilage repair and replacement is a major challenge in plastic reconstructive surgery. The development of a process capable of creating a patient-specific cartilage framework would be a major breakthrough. Here, we described methods for creating human cartilage in vivo and quantitatively assessing the proliferative capacity and cartilage-formation ability in mono- and co-cultures of human chondrocytes and human mesenchymal stem cells in a three-dimensional (3D)-bioprinted hydrogel scaffold. The 3D-bioprinted constructs (5 × 5 × 1.2 mm) were produced using nanofibrillated cellulose and alginate in combination with human chondrocytes and human mesenchymal stem cells using a 3D-extrusion bioprinter. Immediately following bioprinting, the constructs were implanted subcutaneously on the back of 48 nude mice and explanted after 30 and 60 days, respectively, for morphological and immunohistochemical examination. During explantation, the constructs were easy to handle, and the majority had retained their macroscopic grid appearance. Constructs consisting of human nasal chondrocytes showed good proliferation ability, with 17.2% of the surface areas covered with proliferating chondrocytes after 60 days. In constructs comprising a mixture of chondrocytes and stem cells, an additional proliferative effect was observed involving chondrocyte production of glycosaminoglycans and type 2 collagen. This clinically highly relevant study revealed 3D bioprinting as a promising technology for the creation of human cartilage.

Effect of alginate concentration on chondrogenesis of co-cultured human adipose-derived stem cells and nasal chondrocytes: a biological study

Background

The three-dimensional (3D) system is one of the important factors to engineer a biocompatible and functional scaffold for the applications of cell-based therapies for cartilage repair. The 3D alginate hydrogels system has previously been shown to potentially promote chondrogenesis. The chondrocytic differentiation of co-cultured adipose-derived stem cells (ADSCs) and nasal chondrocytes (NCs) within alginate constructs are hypothesized to be influenced by concentration of alginate hydrogel. In this study, we evaluated the effects of alginate concentration on chondrogenic differentiation of ADSCs and NCs co-cultured in a biological approach.

Method

The co-cultured cells of 2:1 ADSCs-to-NCs ratio were encapsulated in alginate constructs in one of three concentrations (1.0%, 1.2% and 1.5%) and cultured under serum free conditions for 7 days. Cell viability, cell proliferation, immunohistochemical, gycosaminogylycans (GAG) synthesis, and gene expression were examined.

Results

Overall, the 1.2% alginate concentration group was relatively effective in chondrocytic differentiation in comparable to other groups. The cell morphology, cell viability, and cell proliferation revealed initial chondrogenic differentiation by the formation of cell clusters as well as the high permeability for exchange of solutes. The formation of newly synthesis cartilage-specific extracellular matrix in 1.2% group was demonstrated by positive immunohistochemical staining of collagen type II. The co-cultured cells in 1.2% group highly expressed COL II, ACP and SOX-9, compared to 1.0% and 1.5% groups, denote the retention of cartilaginous-specific phenotype by suppressing the undifferentiation stem cell markers of SOX-2 and OCT-4. The study showed 1.2% group was less likely to differentiate towards osteogenesis by downregulating hyperthrophy chondrocytic gene of COL X and osseous marker genes of OSC and OSP.

Conclusion

This study suggests that variations in the alginate concentration of co-cultured ADSCs and NCs influenced the chondrogenesis. The remarkable biological performance on chondrogenic differentiation in regulating the concentration of alginate 3D culture provides new insights into the cell cross-talk and demonstrates the effectiveness in regenerative therapies of cartilage defects in tissue engineering.

Bioinks for bioprinting functional meniscus and articular cartilage

3D bioprinting can potentially enable the engineering of biological constructs mimicking the complex geometry, composition, architecture and mechanical properties of different tissues and organs. Integral to the successful bioprinting of functional articular cartilage and meniscus is the identification of suitable bioinks and cell sources to support chondrogenesis or fibrochondrogenesis, respectively. Such bioinks must also possess the appropriate rheological properties to be printable and support the generation of complex geometries. This review will outline the parameters required to develop bioinks for such applications and the current recent advances in 3D bioprinting of functional meniscus and articular cartilage. The paper will conclude by discussing key scientific and technical hurdles in this field and by defining future research directions for cartilage and meniscus bioprinting.

Three-Dimensional Bioprinting and Its Potential in the Field of Articular Cartilage Regeneration

Three-dimensional (3D) bioprinting techniques can be used for the fabrication of personalized, regenerative constructs for tissue repair. The current article provides insight into the potential and opportunities of 3D bioprinting for the fabrication of cartilage regenerative constructs. Although 3D printing is already used in the orthopedic clinic, the shift toward 3D bioprinting has not yet occurred. We believe that this shift will provide an important step forward in the field of cartilage regeneration. Three-dimensional bioprinting techniques allow incorporation of cells and biological cues during the manufacturing process, to generate biologically active implants. The outer shape of the construct can be personalized based on clinical images of the patient's defect. Additionally, by printing with multiple bio-inks, osteochondral or zonally organized constructs can be generated. Relevant mechanical properties can be obtained by hybrid printing with thermoplastic polymers and hydrogels, as well as by the incorporation of electrospun meshes in hydrogels. Finally, bioprinting techniques contribute to the automation of the implant production process, reducing the infection risk. To prompt the shift from nonliving implants toward living 3D bioprinted cartilage constructs in the clinic, some challenges need to be addressed. The bio-inks and required cartilage construct architecture need to be further optimized. The bio-ink and printing process need to meet the sterility requirements for implantation. Finally, standards are essential to ensure a reproducible quality of the 3D printed constructs. Once these challenges are addressed, 3D bioprinted living articular cartilage implants may find their way into daily clinical practice.

Co-culture systems-based strategies for articular cartilage tissue engineering

Cartilage engineering facilitates repair and regeneration of damaged cartilage using engineered tissue that restores the functional properties of the impaired joint. The seed cells used most frequently in tissue engineering, are chondrocytes and mesenchymal stem cells. Seed cells activity plays a key role in the regeneration of functional cartilage tissue. However, seed cells undergo undesirable changes after in vitro processing procedures, such as degeneration of cartilage cells and induced hypertrophy of mesenchymal stem cells, which hinder cartilage tissue engineering. Compared to monoculture, which does not mimic the in vivo cellular environment, co-culture technology provides a more realistic microenvironment in terms of various physical, chemical, and biological factors. Co-culture technology is used in cartilage tissue engineering to overcome obstacles related to the degeneration of seed cells, and shows promise for cartilage regeneration and repair. In this review, we focus first on existing co-culture systems for cartilage tissue engineering and related fields, and discuss the conditions and mechanisms thereof. This is followed by methods for optimizing seed cell co-culture conditions to generate functional neo-cartilage tissue, which will lead to a new era in cartilage tissue engineering.

Co-culture of infrapatellar fat pad-derived mesenchymal stromal cells and articular chondrocytes in plasma clot for cartilage tissue engineering

BACKGROUND

Cell source plays a deterministic role in defining the outcome of a cell-based cartilage regenerative therapy and its clinical translational ability. Recent efforts in the direction of co-culture of two or more cell types attempt to combine the advantages of constituent cell types and negate their demerits.

METHODS

We examined the potential of co-culture of infrapatellar fat pad-derived mesenchymal stromal cells (IFP MSCs) and articular chondrocytes (ACs) in plasma clots in terms of their ratios and culture formats for cartilage tissue engineering.

RESULTS AND DISCUSSION

It was observed that IFP MSCs and ACs interact positively to produce a better quality hyaline cartilage-like matrix. While a supra-additive deposition of sulfated Glycosaminoglycans (sGAG), collagen type II, aggrecan and link protein was observed, deposition of collagen type I and X was sub-additive. (Immuno)-histologically similar cartilage was generated in vitro in IFP MSC:AC ratio of 50:50 and pure AC groups thus yielding a hyaline cartilage with 50% reduced requirement of ACs. Subsequently, we investigated if this response could be improved further by enabling better cell-cell interactions using scaffold-free systems such as self-assembled cartilage or by encapsulating cellular micro-aggregates in plasma clot. However, it was inferred that while self-assembly may have enabled better cell-cell interaction, poor cell survival negated its overall beneficial role, whereas the micro-aggregate group demonstrated highly heterogeneous matrix deposition within the construct, thus diminishing its translational utility. Overall, it was concluded that co-culture of IFP MSCs and ACs at a ratio of 50:50 within plasma clots demonstrated potential for cell-based cartilage regenerative therapy.

Effects of cell type and configuration on anabolic and catabolic activity in 3D co-culture of mesenchymal stem cells and nucleus pulposus cells

Tissue engineering constructs to treat intervertebral disc degeneration must adapt to the hypoxic and inflammatory degenerative disc microenvironment. The objective of this study was to determine the effects of two key design factors, cell type and cell configuration, on the regenerative potential of nucleus pulposus cell (NPC) and mesenchymal stem cell (MSC) constructs. Anabolic and catabolic activity was quantified in constructs of varying cell type (NPCs, MSCs, and a 50:50 co-culture) and varying configuration (individual cells and micropellets). Anabolic and catabolic outcomes were both dependent on cell type. Gene expression of Agg and Col2A1, glycosaminoglycan (GAG) content, and aggrecan immunohistochemistry (IHC), were significantly higher in NPC-only and co-culture groups than in MSC-only groups, with NPC-only groups exhibiting the highest anabolic gene expression levels. However, NPC-only constructs also responded to inflammation and hypoxia with significant upregulation of catabolic genes (MMP-1, MMP-9, MMP-13, and ADAMTS-5). MSC-only groups were unaffected by degenerative media conditions, and co-culture with MSCs modulated catabolic induction of the NPCs. Culturing cells in a micropellet configuration dramatically reduced catabolic induction in co-culture and NPC-only groups. Co-culture micropellets, which take advantage of both cell type and configuration effects, had the most immunomodulatory response, with a significant decrease in MMP-13 and ADAMTS-5 expression in hypoxic and inflammatory media conditions. Co-culture micropellets were also found to self-organize into bilaminar formations with an MSC core and NPC outer layer. Further understanding of these cell type and configuration effects can improve tissue engineering designs. © 2016 The Authors. Journal of Orthopaedic Research published by Wiley Periodicals, Inc. on behalf of the Orthopaedic Research Society. J Orthop Res 35:61-73, 2017.

Optimizing cell sourcing for clinical translation of tissue engineered ears

Background . Currently, the major impediment to clinical translation of our previously described platform for the fabrication of high fidelity, patient-specific tissue engineered ears is the development of a clinically optimal cell sourcing strategy. A limited autologous auricular chondrocyte (AuC) supply in conjunction with rapid chondrocyte de-differentiation during in vitro expansion currently makes clinical translation more challenging. Mesenchymal stem cells (MSCs) offer significant promise due to their inherent chondrogenic potential, and large availability through minimally invasive procedures. Herein, we demonstrate the promise of AuC/MSC co-culture to fabricate elastic cartilage using 50% fewer AuC than standard approaches.

METHODS

Bovine auricular chondrocytes (bAuC) and bovine MSC (bMSC) were encapsulated within 10 mg ml^-1 type I collagen hydrogels in ratios of bAuC:bMSC 100:0, 50:50, and 0:100 at a density of 25 million cells ml^-1 hydrogel. One mm thick collagen sheet gels were fabricated, and thereafter, 8 mm diameter discs were extracted using a biopsy punch. Discs were implanted subcutaneously in the dorsa of nude mice (NU/NU) and harvested after 1 and 3 months.

RESULTS

Gross analysis of explanted discs revealed bAuC:bMSC co-culture discs maintained their size and shape, and exhibited native auricular cartilage-like elasticity after 1 and 3 months of implantation. Co-culture discs developed into auricular cartilage, with viable chondrocytes within lacunae, copious proteoglycan and elastic fiber deposition, and a distinct perichondrial layer. Biochemical analysis confirmed that co-culture discs deposited critical cartilage molecular components more readily than did both bAuC and bMSC discs after 1 and 3 months, and proteoglycan content significantly increased between 1 and 3 months.

CONCLUSION

We have successfully demonstrated an innovative cell sourcing strategy that facilitates our efforts to achieve clinical translation of our high fidelity, patient-specific ears for auricular reconstruction utilizing only half of the requisite auricular chondrocytes to fabricate mature elastic cartilage.

Regeneration of articular cartilage using adipose stem cells

Articular cartilage (AC) has limited potential for self-regeneration and damage to AC eventually leads to the development and progression of osteoarthritis (OA). Cell implantation strategies have emerged as a new treatment modality to regenerate AC. Adipose stem cells/adipose-derived stromal cells (ASCs) have gained attention due to their abundance, excellent proliferative potential, and minimal morbidity during harvest. These advantages lower the cost of cell therapy by circumventing time-consuming procedure of culture expansion. ASCs have drawn attention as a potential source for cartilage regeneration since the feasibility of chondrogenesis from ASCs was first reported. After several groups reported inferior chondrogenesis from ASCs, numerous methods were devised to overcome the intrinsic properties. Most in vivo animal studies have reported good results using predifferentiated or undifferentiated, autologous or allogeneic ASCs to regenerate cartilage in osteochondral defects or surgically-induced OA. In this review, we summarize literature on the isolation and in vitro differentiation processes of ASCs, in vivo studies to regenerate AC in osteochondral defects and OA using ASCs, and clinical applications of ASCs. © 2016 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 104A: 1830-1844, 2016.

Chondrocytes, Mesenchymal Stem Cells, and Their Combination in Articular Cartilage Regenerative Medicine

Articular cartilage (AC) is a highly organized connective tissue lining, covering the ends of bones within articulating joints. Its highly ordered structure is essential for stable motion and provides a frictionless surface easing load transfer. AC is vulnerable to lesions and, because it is aneural and avascular, it has limited self-repair potential which often leads to osteoarthritis. To date, no fully successful treatment for osteoarthritis has been reported. Thus, the development of innovative therapeutic approaches is desperately needed. Autologous chondrocyte implantation, the only cell-based surgical intervention approved in the United States for treating cartilage defects, has limitations because of de-differentiation of articular chondrocytes (AChs) upon in vitro expansion. De-differentiation can be abated if initial populations of AChs are co-cultured with mesenchymal stem cells (MSCs), which not only undergo chondrogenesis themselves but also support chondrocyte vitality. In this review we summarize studies utilizing AChs, non-AChs, and MSCs and compare associated outcomes. Moreover, a comprehensive set of recent human studies using chondrocytes to direct MSC differentiation, MSCs to support chondrocyte re-differentiation and proliferation in co-culture environments, and exploratory animal intra- and inter-species studies are systematically reviewed and discussed in an innovative manner allowing side-by-side comparisons of protocols and outcomes. Finally, a comprehensive set of recommendations are made for future studies.

Cartilage Regeneration in the Head and Neck Area: Combination of Ear or Nasal Chondrocytes and Mesenchymal Stem Cells Improves Cartilage Production

BACKGROUND

Cartilage tissue engineering can offer promising solutions for restoring cartilage defects in the head and neck area and has the potential to overcome limitations of current treatments. However, to generate a construct of reasonable size, large numbers of chondrocytes are required, which limits its current applicability. Therefore, the authors evaluate the suitability of a combination of cells for cartilage regeneration: bone marrow-derived mesenchymal stem cells and ear or nasal chondrocytes.

METHODS

Human bone marrow-derived mesenchymal stem cells were encapsulated in alginate hydrogel as single-cell-type populations or in combination with bovine ear chondrocytes or nasal chondrocytes at an 80:20 ratio. Constructs were either cultured in vitro or implanted directly subcutaneously into mice. Cartilage formation was evaluated with biochemical and biomechanical analyses. The use of a xenogeneic coculture system enabled the analyses of the contribution of the individual cell types using species-specific gene-expression analyses.

RESULTS

In vivo, human bone marrow-derived mesenchymal stem cells/bovine ear chondrocytes or human bone marrow-derived mesenchymal stem cells/bovine nasal chondrocytes contained amounts of cartilage components similar to those of constructs containing chondrocytes only (i.e., bovine ear and nasal chondrocytes). In vitro, species-specific gene-expression analyses demonstrated that aggrecan was expressed by the chondrocytes only, which suggests a more trophic role for human bone marrow-derived mesenchymal stem cells. Furthermore, the additional effect of human bone marrow-derived mesenchymal stem cells was more pronounced in combination with bovine nasal chondrocytes.

CONCLUSIONS

By supplementing low numbers of bovine ear or nasal chondrocytes with human bone marrow-derived mesenchymal stem cells, the authors were able to engineer cartilage constructs with properties similar to those of constructs containing chondrocytes only. This makes the procedure more feasible for future applicability in the reconstruction of cartilage defects in the head and neck area because fewer chondrocytes are required.

Methods of Monitoring Cell Fate and Tissue Growth in Three-Dimensional Scaffold-Based Strategies for In Vitro Tissue Engineering

In the field of tissue engineering, there is a need for methods that allow assessing the performance of tissue-engineered constructs noninvasively in vitro and in vivo. To date, histological analysis is the golden standard to retrieve information on tissue growth, cellular distribution, and cell fate on tissue-engineered constructs after in vitro cell culture or on explanted specimens after in vivo applications. Yet, many advances have been made to optimize imaging techniques for monitoring tissue-engineered constructs with a sub-mm or μm resolution. Many imaging modalities have first been developed for clinical applications, in which a high penetration depth has been often more important than lateral resolution. In this study, we have reviewed the current state of the art in several imaging approaches that have shown to be promising in monitoring cell fate and tissue growth upon in vitro culture. Depending on the aimed tissue type and scaffold properties, some imaging methods are more applicable than others. Optical methods are mostly suited for transparent materials such as hydrogels, whereas magnetic resonance-based methods are mostly applied to obtain contrast between hard and soft tissues regardless of their transparency. Overall, this review shows that the field of imaging in scaffold-based tissue engineering is developing at a fast pace and has the potential to overcome the limitations of destructive endpoint analysis.

Chondrocytes Cocultured with Stromal Vascular Fraction of Adipose Tissue Present More Intense Chondrogenic Characteristics Than with Adipose Stem Cells

Partial replacement of chondrocytes by stem cells has been proposed to improve the performance of autologous chondrocyte implantation (ACI). Our previous studies showed that the increased cartilage production in pellet cocultures of chondrocytes and mesenchymal stem cells (MSCs) is due to a trophic role of the MSCs by stimulating chondrocyte proliferation and matrix production rather than MSCs actively undergoing chondrogenic differentiation. The aim of this study is to compare the trophic effects of stromal vascular fraction cells (SVF) and in vitro expanded adipose stem cells (ASC). SVF and culture-expanded ASC (n = 9) were cocultured with primary human chondrocytes in pellets. By glycosaminoglycan (GAG) and DNA assays, we showed that coculture pellets of SVF and chondrocytes have more GAG deposition than that of ASC and chondrocytes. Results of the short tandem repeats analysis indicated that the increase in the chondrocyte proportion in the coculture pellets is more pronounced in the SVF coculture group than in the ASC coculture group. Using flow cytometry and microarray, we demonstrated that SVF and ASC have different characteristics in cell surface markers and gene expression profiles. SVF is more heterogeneous than ASC, whereas ASC is more enriched in cells from the mesenchymal lineage than SVF. By subcutaneous implantation into nude mice, we showed that constructs of SVF and chondrocytes are better in depositing cartilage matrix than the mixture of ASC and chondrocytes. Taken together, SVF is better than ASC in terms of forming cartilage matrix in pellet coculture and in coimplantation models omitting the need for prior cell expansion. Our study suggests that the SVF in combination with primary human chondrocytes may be a good cell combination for one-stage cartilage repair.

Modulating stem cell–chondrocyte interactions for cartilage repair using combinatorial extracellular matrix-containing hydrogels

Combinatorial ECM-containing hydrogels with decoupled mechanical and biochemical cues modulate cartilage formation by a stem cell and chondrocyte co-culture in 3D.

Living scaffolds: surgical repair using scaffolds seeded with human adipose-derived stem cells

BACKGROUND

Decellularized porcine small intestinal submucosa (SIS) is a biological scaffold used surgically for tissue repair. Here, we demonstrate a model of SIS as a scaffold for human adipose-derived stem cells (ASCs) in vitro and apply it in vivo in a rat ventral hernia repair model.

STUDY DESIGN

ASCs adherence was examined by confocal microscopy and proliferation rate was measured by growth curves. Multipotency of ASCs seeded onto SIS was tested using adipogenic, chondrogenic, and osteogenic induction media. For in vivo testing, midline abdominal musculofascial and peritoneal defects were created in Sprague-Dawley rats. Samples were evaluated for tensile strength, histopathology and immunohistochemistry.

RESULTS

All test groups showed cell adherence and proliferation on SIS. Fibronectin-treated scaffolds retained more cells than those treated with vehicle alone (p < 0.05). Fresh stromal vascular fraction (SVF) pellets containing ASCs were injected onto the SIS scaffold and showed similar results to cultured ASCs. Maintenance of multipotency on SIS was confirmed by lineage-specific markers and dyes. Histopathology revealed neovascularization and cell influx to ASC-seeded SIS samples following animal implantation. ASC-seeded SIS appeared to offer a stronger repair than plain SIS, but these results were not statistically significant. Immunohistochemistry showed continued presence of cells of human origin in ASC-seeded repairs at 1 month postoperation.

CONCLUSION

Pretreatment of the scaffold with fibronectin offers a method to increase cell adhesion and delivery. ASCs maintain their immunophenotype and ability to differentiate while on SIS. Seeding freshly isolated SVF onto the scaffold demonstrated that minimally manipulated cells may be useful for perioperative surgical applications within the OR suite. We have shown that this model for a "living mesh" can be successfully used in abdominal wall reconstruction.

Engineering cartilaginous grafts using chondrocyte-laden hydrogels supported by a superficial layer of stem cells

During postnatal joint development, progenitor cells that reside in the superficial region of articular cartilage first drive the rapid growth of the tissue and later help direct the formation of mature hyaline cartilage. These developmental processes may provide directions for the optimal structuring of co-cultured chondrocytes (CCs) and multipotent stromal/stem cells (MSCs) required for engineering cartilaginous tissues. The objective of this study was to engineer cartilage grafts by recapitulating aspects of joint development where a population of superficial progenitor cells drives the development of the tissue. To this end, MSCs were either self-assembled on top of CC-laden agarose gels (structured co-culture) or were mixed with CCs before being embedded in an agarose hydrogel (mixed co-culture). Porcine infrapatellar fat pad-derived stem cells (FPSCs) and bone marrow-derived MSCs (BMSCs) were used as sources of progenitor cells. The DNA, sGAG and collagen content of a mixed co-culture of FPSCs and CCs was found to be lower than the combined content of two control hydrogels seeded with CCs and FPSCs only. In contrast, a mixed co-culture of BMSCs and CCs led to increased proliferation and sGAG and collagen accumulation. Of note was the finding that a structured co-culture, at the appropriate cell density, led to greater sGAG accumulation than a mixed co-culture for both MSC sources. In conclusion, assembling MSCs onto CC-laden hydrogels dramatically enhances the development of the engineered tissue, with the superficial layer of progenitor cells driving CC proliferation and cartilage ECM production, mimicking certain aspects of developing cartilage. Copyright © 2015 John Wiley & Sons, Ltd.

Tissue-engineered cartilage for facial plastic surgery

PURPOSE OF REVIEW

The reconstruction of cartilaginous craniofacial defects is ideally performed with analogous grafting material, such as autologous tissue. However, the use of autologous cartilage is limited by its finite availability and potentially suboptimal geometry to repair specific defects. Tissue engineering of human cartilage may provide the adequate supply of grafting and implant material for the reconstruction of cartilaginous facial defects. An update of the various cartilage tissue engineering methodologies is provided in this review.

RECENT FINDINGS

The cartilage tissue engineering paradigm begins with the harvest of a small septal cartilage donor specimen. This is followed by the isolation and subsequent proliferation of chondrocytes and the seeding of these cells onto three-dimensional scaffolds. Neocartilage is created as pericellular substrate, is produced by the cells and deposited throughout the scaffold. Theoretically, the mature cartilage construct can be introduced back into the same patient for reconstruction of craniofacial defects. Initial steps of the cartilage tissue engineering protocol have been standardized; however, modifications of subsequent steps have shown the potential to profoundly impact tissue composition and strength, bringing the properties of cartilage constructs closer to those of native human septum.

SUMMARY

The ability to engineer virtually limitless quantities of autologous cartilage could have a profound impact on facial plastic and reconstructive surgery. The strategies used to refine human cartilage culture techniques have successfully produced neocartilage constructs with biochemical and biomechanical properties approaching those of native septal tissue. With the steady progress achieved in recent years, there is great capacity for the proximate realization of surgically implantable tissue-engineered cartilage constructs.

Strategies to minimize hypertrophy in cartilage engineering and regeneration

Due to a blood supply shortage, articular cartilage has a limited capacity for self-healing once damaged. Articular chondrocytes, cartilage progenitor cells, embryonic stem cells, and mesenchymal stem cells are candidate cells for cartilage regeneration. Significant current attention is paid to improving chondrogenic differentiation capacity; unfortunately, the potential chondrogenic hypertrophy of differentiated cells is largely overlooked. Consequently, the engineered tissue is actually a transient cartilage rather than a permanent one. The development of hypertrophic cartilage ends with the onset of endochondral bone formation which has inferior mechanical properties. In this review, current strategies for inhibition of chondrogenic hypertrophy are comprehensively summarized; the impact of cell source options is discussed; and potential mechanisms underlying these strategies are also categorized. This paper aims to provide guidelines for the prevention of hypertrophy in the regeneration of cartilage tissue. This knowledge may also facilitate the retardation of osteophytes in the treatment of osteoarthritis.

Subchondral bone influences chondrogenic differentiation and collagen production of human bone marrow-derived mesenchymal stem cells and articular chondrocytes

Introduction

Osteoarthritis (OA) is characterized by an imbalance in cartilage and underlying subchondral bone homeostasis. We hypothesized that signals from the subchondral bone may modulate production of matrix components, alter chondrogenic differentiation potential of cocultured bone marrow-derived mesenchymal stem cells (BMSC) and induce a phenotypic shift in differentiated OA chondrocytes.

Methods

We established a novel coculture model between BMSC, mixed cultures (BMSC and chondrocytes) and chondrocytes embedded in fibrin gel with OA and normal subchondral bone explants (OAB and NB). Tissues and cells were either derived from OA or trauma patients. In addition, we used adipose-derived stem cells (ASC) from liposuction. With gene expression analysis, biochemical assays, immunofluorescence and biomechanical tests we characterized the properties of newly generated extracellular matrix (ECM) from chondrocytes and chondrogenically differentiating BMSC cocultured with OAB or NB in comparison with monocultures (cultures without bone explants).

Results

Overall, gene expression of collagens of OAB and NB cocultured cells was reduced compared to monocultures. Concomitantly, we observed significantly lower collagen I, II and III and glycosaminoglycan (GAG) production in OAB cocultured cell lysates. In parallel, we detected increased concentrations of soluble GAGs and basic fibroblast growth factor (bFGF), interleukin (IL)-6 and IL-8 in supernatants of OAB and NB cocultures mainly at early time points. IL-1ß concentration was increased in supernatants of OAB cocultures, but not in NB cocultures. Cell-free NB or OAB explants released different amounts of IL-1ß, bFGF and soluble GAG into cell culture supernatants. In comparison to cocultures, monocultures exhibited higher Young’s modulus and equilibrium modulus. Stimulation of monocultures with IL-1ß led to a downregulation of aggrecan (ACAN) gene expression and in general to induced matrix metalloprotease (MMP)2, MMP3 and MMP-13 gene expression while IL-6 and IL-8 stimulation partly reduced ACAN, MMP3 and MMP-13 gene expression.

Conclusions

Our results suggest an alteration of molecular composition and mechanical properties of the newly formed ECM in subchondral bone cocultures. We suggest that soluble factors, that is interleukins and bFGF, released in cocultures exert inhibitory effects on collagen and temporary effects on proteoglycan production, which finally results in a reduction of mechanical strength of newly formed fibrillar networks.

Electronic supplementary material

The online version of this article (doi:10.1186/s13075-014-0453-9) contains supplementary material, which is available to authorized users.

Intervertebral disc and stem cells cocultured in biomimetic extracellular matrix stimulated by cyclic compression in perfusion bioreactor

BACKGROUND CONTEXT

Intervertebral disc (IVD) degeneration often causes back pain. Current treatments for disc degeneration, including both surgical and nonsurgical approaches, tend to compromise the disc movement and cannot fully restore functions of the IVD. Instead, cell-based IVD tissue engineering seems promising as an ultimate therapy for IVD degeneration.

PURPOSE

To tissue-engineer an IVD ex vivo as a biological substitute to replace degenerative IVD.

STUDY DESIGN

An extracellular matrix (ECM) structure-mimetic scaffold, cocultured human IVD cells and human mesenchymal stem cells (hMSCs), and mechanical stimulation were used to biofabricate a tissue-engineered IVD.

METHODS

An optimal ratio of human annulus fibrosus (hAF) cells to hMSCs for AF generation within aligned nanofibers, and that of human nucleus pulposus (hNP) cells to hMSCs for NP generation within hydrogels were first determined after comparing different coculture ratios of hAF or hNP cells to hMSCs. Nanofibrous strips seeded with cocultured hAF cells/hMSCs were constructed into multilayer concentric rings, enclosing an inner core of hydrogel seeded with hNP cells/hMSCs. A piece of nonwoven nanofibrous mat seeded with hMSC-derived osteoblasts was assembled on the top of the cellular nanofiber/hydrogel assembly, as an interface layer between the cartilagenous end plate and vertebral body. The final assembled construct was then maintained in an osteochondral cocktail medium and stimulated with compressive loading to further enhance the hAF and hNP cells differentiation and increase the IVD ECM production.

RESULTS

Among all cocultured groups, hAF cells and hMSCs in the ratio of 2:1 cultured in nanofibers showed the closest mRNA expression levels of AF-related markers to positive control hAF cells, whereas hNP cells and hMSCs in the ratio of 1:2 cultured in hydrogels showed the closest expression levels of NP-related markers to positive control hNP cells. The effects of compressive loading on chondrogenesis of hAF or hNP cell and hMSC coculture were dependent on the scaffold structure; the expression of cartilage-related markers in AF nanofibers was downregulated, whereas that in NP hydrogel was upregulated. Interestingly, we found that hMSC-derived osteogenic cells in the interface layer were turned into chondrogenic lineage cells, with decreased expression of osteogenic markers and increased expression of chondrogenic markers.

CONCLUSIONS

We demonstrate a unique approach using a biomimetic scaffold, IVD and stem cell coculture, and mechanical stimulation to tissue-engineer a biological IVD substitute. The results show that our approach provides both favorable physical and chemical cues through cell-matrix and cell-cell interactions and mechanobiological induction to enhance IVD generation ex vivo. Our findings may lead to viable tissue engineering applications of generating a functional biological IVD for the treatment of disc degeneration.