Ranaspumin-2: structure and function of a surfactant protein from the foam nests of a tropical frog

Foam fractionation Tags (F-Tags) enabling surfactant-free, activity-preserving recovery of enzymes

Enzymes have become important tools in many industries. However, the full exploitation of their potential is currently limited by a lack of efficient and cost-effective methods for enzyme purification from microbial production. One technology that could solve this problem is foam fractionation. In this study, we show that diverse natural foam-stabilizing proteins fused as F-Tags to β-lactamase, penicillin G acylase, and formate dehydrogenase, respectively, are able to mediate foaming and recovery of the enzymes by foam fractionation. The catalytic activity of all three candidates is largely preserved. Under appropriate fractionation conditions, especially when a wash buffer is used, some F-Tags also allow nearly complete separation of the target enzyme from a contaminating protein. We found that a larger distance between the F-Tag and the target enzyme has a positive effect on the maintenance of catalytic activity. However, we did not identify any particular sequence motifs or physical parameters that influenced performance as an F-tag. The best results were obtained with a short helical F-Tag, which was originally intended to serve only as a linker sequence. The findings of the study suggest that the development of molecular tags that enable the establishment of surfactant-free foam fractionation for enzyme workup is a promising method. KEY POINTS: • Foam-stabilizing proteins mediate activity-preserving foam fractionation of enzymes • Performance as an F-Tag is not restricted to particular structural motifs • Separation from untagged protein benefits from low foam stability and foam washings.

Neotropical Frog Foam Nest’s Microbiomes

Amphibian foam nests are unique microenvironments that play a crucial role in the development of tadpoles. They contain high levels of proteins and carbohydrates, yet little is known about the impact of their microbiomes on tadpole health. This study provides a first characterization of the microbiome of foam nests from three species of Leptodactylids (Adenomera hylaedactyla, Leptodactylus vastus, and Physalaemus cuvieri) by investigating the DNA extracted from foam nests, adult tissues, soil, and water samples, analyzed via 16S rRNA gene amplicon sequencing to gain insight into the factors driving its composition. The results showed that the dominant phyla were proteobacteria, bacteroidetes, and firmicutes, with the most abundant genera being Pseudomonas, Sphingobacterium, and Paenibacillus. The foam nest microbiomes of A. hylaedactyla and P. cuvieri were more similar to each other than to that of L. vastus, despite their phylogenetic distance. The foam nests demonstrated a distinct microbiome that clustered together and separated from the microbiomes of the environment and adult tissue samples. This suggests that the peculiar foam nest composition shapes its microbiome, rather than vertical or horizontal transference forces. We expanded this knowledge into amphibian foam nest microbiomes, highlighting the importance of preserving healthy foam nests for amphibian conservation.

Rsn-2-mediated directed foam enrichment of β-lactamase

Today, the availability of methods for the activity-preserving and cost-efficient downstream processing of enzymes forms a major bottleneck to the use of these valuable tools in technical processes. A promising technology appears to be foam fractionation, which utilizes the adsorption of proteins at a gas-liquid interface. However, the employment of surfactants and the dependency of the applicability on individual properties of the target molecules are considerable drawbacks. Here, we demonstrate that a reversible fusion of the large, surface-active protein Ranaspumin-2 (Rsn-2) to a β-lactamase enabled both surfactant-free formation of a stable foam and directed enrichment of the enzyme by the foaming. At the same time, β-lactamase maintained 70% of its catalytic activity, which was in stark contrast to the enzyme without fusion to Rsn-2. Rsn-2 predominantly mediated adsorption. Comparable results were obtained after fusion to the structurally more complex penicillin G acylase as the target enzyme. The results indicate that using a surface-active protein as a fusion tag might be the clue to the establishment of foam fractionation as a general method for enzyme downstream processing. This article is protected by copyright. All rights reserved.

Genetically engineered materials: Proteins and beyond

Information-rich molecules provide opportunities for evolution. Genetically engineered materials are superior in that their properties are coded within genetic sequences and could be fine-tuned. In this review, we elaborate the concept of genetically engineered materials (GEMs) using examples ranging from engineered protein materials to engineered living materials. Protein-based materials are the materials of choice by nature. Recent progress in protein engineering has led to opportunities to tune their sequences for optimal material performance. Proteins also play a central role in living materials where they act in concert with other biological components as well as nonbiological cofactors, giving rise to living features. While the existing GEMs are often limited to those constructed by building blocks of biological origin, being genetically engineerable does not preclude nonbiologic or synthetic materials, the latter of which have yet to be fully explored.

Combined phylogenetic analysis of Pleurodema (Anura: Leptodactylidae: Leiuperinae)

The genus Pleurodema comprises 15 species distributed through the Neotropical region, from sea level up to 5000 m.a.s.l. A total-evidence analysis of Pleurodema is provided based on the parsimony criterion. The combined dataset included morphometric, phenotypic, and DNA evidence (34 taxa, 4441 characters). The parsimony analysis yielded one most-parsimonious tree. Pleurodema was recovered as a well-supported clade composed of two major subclades. One subclade has an identical topology to that of previous analyses, the P. brachyops Clade (P. alium, P. borellii, P. brachyops, P. cinereum, P. diplolister, and P. tucumanum). The other subclade includes the remaining nine species of the genus, exhibiting a topology different from that of previous studies. According to the present phylogeny, this second lineage is formed by the P. nebulosum Clade (P. guayapae + P. nebulosum), P. marmoratum, the re-defined P. thaul Clade (P. bufoninum, P. somuncurense, P. thaul) and the P. bibroni Clade (P. bibroni, P. cordobae, P. kriegi). The reproductive modes of Pleurodema represent a unique combination of features within Leiuperinae, including three egg-clutch structures, two types of amplexus, and lack of vocalization. Also, some species of Pleurodema have been considered fossorial, because they are capable of digging with their hind-limbs and remaining in self-made burrows during dry seasons. The evolution of characters associated with reproductive biology and fossoriality is discussed in light of the obtained results.

Frog nest foams exhibit pharmaceutical foam-like properties

Foams have frequently been used as systems for the delivery of cosmetic and therapeutic molecules; however, there is high variability in the foamability and long-term stability of synthetic foams. The development of pharmaceutical foams that exhibit desirable foaming properties, delivering appropriate amounts of the active pharmaceutical ingredient (API) and that have excellent biocompatibility is of great interest. The production of stable foams is rare in the natural world; however, certain species of frogs have adopted foam production as a means of providing a protective environment for their eggs and larvae from predators and parasites, to prevent desiccation, to control gaseous exchange, to buffer temperature extremes, and to reduce UV damage. These foams show great stability (up to 10 days in tropical environments) and are highly biocompatible due to the sensitive nature of amphibian skin. This work demonstrates for the first time that nests of the túngara frog (Engystomops pustulosus) are stable ex situ with useful physiochemical and biocompatible properties and are capable of encapsulating a range of compounds, including antibiotics. These protein foam mixtures share some properties with pharmaceutical foams and may find utility in a range of pharmaceutical applications such as topical drug delivery systems.

Hydrophobicity, amphilicity, and flexibility: Relation between molecular protein properties and the macroscopic effects of surface activity

Their surface activity enables proteins to form and stabilize foam, which can be used for in situ product separation or foam fractionation. Thus, it would be highly desirable to predict the surface activity of proteins based on their molecular properties like hydrophobicity, amphilicity, or structure on primary, secondary, and tertiary level. Ionic strength and pH were adjusted to gain maximum surface activity. The surface activity decreased in the order α lactalbumin > β‑lactoglobulin > trypsinogen > papain. For the theoretical analysis, the database was extended by including 2 hydrophobins into the investigation, since they are known to exhibit an outstanding surface activity. No relation to the macroscopic behavior was found considering the hydrophobicity. I.e., the non-hydrophobins did not differ significantly from each other, and from the hydrophobins, one was significantly hydrophobic, and the other was significantly hydrophilic. Also, no relations were found considering the amphilicity of the secondary structure elements. However, taking into account the tertiary protein structure, it was found that for most of the proteins investigated, the presence of non-buried amphiphilic secondary structure elements in combination with a certain amount of flexibility correlates with the surface activity.

In search of a novel chassis material for synthetic cells: emergence of synthetic peptide compartment

Giant lipid vesicles have been used extensively as a synthetic cell model to recapitulate various life-like processes, including in vitro protein synthesis, DNA replication, and cytoskeleton organization. Cell-sized lipid vesicles are mechanically fragile in nature and prone to rupture due to osmotic stress, which limits their usability. Recently, peptide vesicles have been introduced as a synthetic cell model that would potentially overcome the aforementioned limitations. Peptide vesicles are robust, reasonably more stable than lipid vesicles and can withstand harsh conditions including pH, thermal, and osmotic variations. This mini-review summarizes the current state-of-the-art in the design, engineering, and realization of peptide-based chassis materials, including both experimental and computational work. We present an outlook for simulation-aided and data-driven design and experimental realization of engineered and multifunctional synthetic cells.

Transcriptomic analysis of differentially expressed genes in the oviduct of Rhacophorus omeimontis provides insights into foam nest construction

BACKGROUND

The production of foam nests is one of the strategies that has evolved to allow some anuran species to protect their eggs and larvae. Despite considerable knowledge of the biochemical components of and construction behavior leading to anuran foam nests, little is known about the molecular basis of foam nest construction. Rhacophorus omeimontis presents an arboreal foam-nesting strategy during the breeding season. To better understand the molecular mechanism of foam nest production, transcriptome sequencing was performed using the oviduct of female R. omeimontis during the period when foam nest production began and the period when foam nest production was finished.

RESULTS

The transcriptomes of six oviduct samples of R. omeimontis were obtained using Illumina sequencing. A total of 84,917 unigenes were obtained, and 433 genes (270 upregulated and 163 downregulated) were differentially expressed between the two periods. These differentially expressed genes (DEGs) were mainly enriched in extracellular space and extracellular region based on Gene Ontology (GO) enrichment analysis and in the pathways of two-component system, cell adhesion molecules, steroid hormone biosynthesis and neuroactive ligand-receptor interaction based on Kyoto Encyclopedia of Genes and Genomes (KEGG) enrichment analysis. Specifically, genes encoding lectins, surfactant proteins and immunity components were highly expressed when the foam nest construction began, indicating that the constituents of foam nests in R. omeimontis were likely a mixture of surfactant, lectins and immune defense proteins. During the period when foam nest production was finished, genes related to lipid metabolism, steroid hormone and immune defense were highly expressed, indicating their important roles in regulating the process of foam nesting.

CONCLUSIONS

Our study provides a rich list of potential genes involved in the production of foam nests in R. omeimontis. These results provide insights into the molecular mechanisms underlying the process of foam nest construction and will facilitate further studies of R. omeimontis.

Molecular Dynamics Simulation of Protein Biosurfactants

Surfaces and interfaces are ubiquitous in nature and are involved in many biological processes. Due to this, natural organisms have evolved a number of methods to control interfacial and surface properties. Many of these methods involve the use of specialised protein biosurfactants, which due to the competing demands of high surface activity, biocompatibility, and low solution aggregation may take structures that differ from the traditional head–tail structure of small molecule surfactants. As well as their biological functions, these proteins have also attracted interest for industrial applications, in areas including food technology, surface modification, and drug delivery. To understand the biological functions and technological applications of protein biosurfactants, it is necessary to have a molecular level description of their behaviour, in particular at surfaces and interfaces, for which molecular simulation is well suited to investigate. In this review, we will give an overview of simulation studies of a number of examples of protein biosurfactants (hydrophobins, surfactin, and ranaspumin). We will also outline some of the key challenges and future directions for molecular simulation in the investigation of protein biosurfactants and how this can help guide future developments.

Adsorption and conformations of lysozyme and α-lactalbumin at a water-octane interface

As proteins contain both hydrophobic and hydrophilic amino acids, they will readily adsorb onto interfaces between water and hydrophobic fluids such as oil. This adsorption normally causes changes in the protein structure, which can result in loss of protein function and irreversible adsorption, leading to the formation of protein interfacial films. While this can be advantageous in some applications (e.g., food technology), in most cases it limits our ability to exploit protein functionality at interfaces. To understand and control protein interfacial adsorption and function, it is necessary to understand the microscopic conformation of proteins at liquid interfaces. In this paper, molecular dynamics simulations are used to investigate the adsorption and conformation of two similar proteins, lysozyme and α-lactalbumin, at a water-octane interface. While they both adsorb onto the interface, α-lactalbumin does so in a specific orientation, mediated by two amphipathic helices, while lysozyme adsorbs in a non-specific manner. Using replica exchange simulations, both proteins are found to possess a number of distinct interfacial conformations, with compact states similar to the solution conformation being most common for both proteins. Decomposing the different contributions to the protein energy at oil-water interfaces suggests that conformational change for α-lactalbumin, unlike lysozyme, is driven by favourable protein-oil interactions. Revealing these differences between the factors that govern the conformational change at interfaces in otherwise similar proteins can give insight into the control of protein interfacial adsorption, aggregation, and function.

Valorization of papaya fruit waste through low-cost fractionation and microbial conversion of both juice and seed lipids

Seed oil from papaya waste was validated as a novel carbon substrate for Yarrowia lipolytica to produce high-value products.

Frog foams and natural protein surfactants

•

Biological foams contain a cocktail of unusual proteins with diverse properties.

•

Natural foam proteins have surfactant properties equal to or better than conventional detergents.

•

They reveal new physical principles based on conformational change at interfaces.

•

They illustrate alternative surfactant mechanisms not available to conventional detergents.

•

Can act synergistically to form and stabilize bio-compatible, hydrated foam structures.

Foams and surfactants are relatively rare in biology because of their potential to harm cell membranes and other delicate tissues. However, in recent work we have identified and characterized a number of natural surfactant proteins found in the foam nests of tropical frogs and other unusual sources. These proteins, and their associated foams, are relatively stable and bio-compatible, but with intriguing molecular structures that reveal a new class of surfactant activity. Here we review the structures and functional mechanisms of some of these proteins as revealed by experiments involving a range of biophysical and biochemical techniques, with additional mechanistic support coming from more recent site-directed mutagenesis studies.

The Conformation of Interfacially Adsorbed Ranaspumin-2 Is an Arrested State on the Unfolding Pathway

Ranaspumin-2 (Rsn-2) is a surfactant protein found in the foam nests of the túngara frog. Previous experimental work has led to a proposed model of adsorption that involves an unusual clam-shell-like unhinging of the protein at an interface. Interestingly, there is no concomitant denaturation of the secondary structural elements of Rsn-2 with the large-scale transformation of its tertiary structure. In this work we use both experiment and simulation to better understand the driving forces underpinning this unusual process. We develop a modified Gō-model approach where we have included explicit representation of the side chains to realistically model the interaction between the secondary structure elements of the protein and the interface. Doing so allows for the study of the underlying energy landscape that governs the mechanism of Rsn-2 interfacial adsorption. Experimentally, we study targeted mutants of Rsn-2, using the Langmuir trough, pendant drop tensiometry, and circular dichroism, to demonstrate that the clam-shell model is correct. We find that Rsn-2 adsorption is in fact a two-step process: the hydrophobic N-terminal tail recruits the protein to the interface after which Rsn-2 undergoes an unfolding transition that maintains its secondary structure. Intriguingly, our simulations show that the conformation Rsn-2 adopts at an interface is an arrested state along the denaturation pathway. More generally, our computational model should prove a useful, and computationally efficient, tool in studying the dynamics and energetics of protein-interface interactions.

Adsorption of the natural protein surfactant Rsn-2 onto liquid interfaces

To stabilize foams, droplets and films at liquid interfaces a range of protein biosurfactants have evolved in nature. Compared to synthetic surfactants, these combine surface activity with biocompatibility and low solution aggregation. One recently studied example is Rsn-2, a component of the foam nest of the frog Engystomops pustulosus, which has been predicted to undergo a clamshell-like opening transition at the air-water interface. Using atomistic molecular dynamics simulations and surface tension measurements we study the adsorption of Rsn-2 onto air-water and cyclohexane-water interfaces. The protein adsorbs readily at both interfaces, with adsorption mediated by the hydrophobic N-terminus. At the cyclohexane-water interface the clamshell opens, due to the favourable interaction between hydrophobic residues and cyclohexane molecules and the penetration of cyclohexane molecules into the protein core. Simulations of deletion mutants showed that removal of the N-terminus inhibits interfacial adsorption, which is consistent with the surface tension measurements. Deletion of the hydrophilic C-terminus also affects adsorption, suggesting that this plays a role in orienting the protein at the interface. The characterisation of the interfacial behaviour gives insight into the factors that control the interfacial adsorption of proteins, which may inform new applications of this and similar proteins in areas including drug delivery and food technology and may also be used in the design of synthetic molecules showing similar changes in conformation at interfaces.

From Folding to Function: Design of a New Switchable Biosurfactant Protein

A new anionic biosurfactant protein (SP16) capable of tuning foaming behaviour by pH or salt has been designed. This biosurfactant exhibits unique foaming behaviour with high sensitivity to pH. A good level of foaming was observed at pH 2 but not at pH 3. A further increase by one pH unit to pH 4 restored good foaming. At pH 5-8, SP16 again showed low foaming propensity, whereas the presence of salt (NaCl) was able to restore foaming again. Interfacial tension and circular dichroism investigations revealed the foaming control mechanism. The high negative charge (-16.6) at pH 6 and above restricted the ability of SP16 to fold into an α-helical conformation and also restricted surface activity. For pH 5 (-13.6), even though SP16 folds in bulk to give α-helical structure, the high charge inhibited adsorption at the air-water interface, resulting in a significant lag time of about 150-200 sec to achieve a decrease in interfacial tension. In contrast to its low foaming behaviour at pH 5-8, the presence of salt (NaCl) was found to effectively screen negative charge, thus leading to its folding and a decrease of interfacial tension. This new design offers a new strategy to control foaming behaviour, and elaborates a clear link between charge, structure and interfacial activity for biosurfactants.

EHD2 restrains dynamics of caveolae by an ATP-dependent, membrane-bound, open conformation

The EH-domain-containing protein 2 (EHD2) is a dynamin-related ATPase that confines caveolae to the cell surface by restricting the scission and subsequent endocytosis of these membrane pits. For this, EHD2 is thought to first bind to the membrane, then to oligomerize, and finally to detach, in a stringently regulated mechanistic cycle. It is still unclear how ATP is used in this process and whether membrane binding is coupled to conformational changes in the protein. Here, we show that the regulatory N-terminal residues and the EH domain keep the EHD2 dimer in an autoinhibited conformation in solution. By significantly advancing the use of infrared reflection-absorption spectroscopy, we demonstrate that EHD2 adopts an open conformation by tilting the helical domains upon membrane binding. We show that ATP binding enables partial insertion of EHD2 into the membrane, where G-domain-mediated oligomerization occurs. ATP hydrolysis is related to detachment of EHD2 from the membrane. Finally, we demonstrate that the regulation of EHD2 oligomerization in a membrane-bound state is crucial to restrict caveolae dynamics in cells.

Molecular Characteristics and Biological Functions of Surface-Active and Surfactant Proteins

Many critical biological processes take place at hydrophobic:hydrophilic interfaces, and a wide range of organisms produce surface-active proteins and peptides that reduce surface and interfacial tension and mediate growth and development at these boundaries. Microorganisms produce both small lipid-associated peptides and amphipathic proteins that allow growth across water:air boundaries, attachment to surfaces, predation, and improved bioavailability of hydrophobic substrates. Higher-order organisms produce surface-active proteins with a wide variety of functions, including the provision of protective foam environments for vulnerable reproductive stages, evaporative cooling, and gas exchange across airway membranes. In general, the biological functions supported by these diverse polypeptides require them to have an amphipathic nature, and this is achieved by a diverse range of molecular structures, with some proteins undergoing significant conformational change or intermolecular association to generate the structures that are surface active.

Frog Foam Nest Protein Diversity and Synthesis

Some amphibian species have developed a breeding strategy in which they deposit their eggs in stable foam nests to protect their eggs and larvae. The frog foam nests are rich in proteins (ranaspumin), especially surfactant proteins, involved in the production of the foam nest. Despite the ecological importance of the foam nests for evolution and species conservation, the biochemical composition, the long-term stability and even the origin of the components are still not completely understood. Recently we showed that Lv-RSN-1, a 23.5-kDa surfactant protein isolated from the nest of the frog Leptodacylus vastus, presents a structural conformation distinct from any protein structures yet reported. So, in the current study we aimed to reveal the protein composition of the foam nest of L. vastus and further characterize the Lv-RSN-1. Proteomic analysis showed the foam nest contains more than 100 of proteins, and that Lv-RSN-1 comprises 45% of the total proteins, suggesting a key role in the nest construction and stability. We demonstrated by Western blotting that Lv-RSN-1 is mainly produced only by the female in the pars convoluta dilata, which highlights the importance of the female preservation for conservation of species that depend on the production of foam nests in the early stages of development. Overall, our results showed the foam nest of L. vastus is composed of a great diversity of proteins and that besides Lv-RSN-1, the main protein in the foam, other proteins must have a coadjuvant role in building and stability of the nest.

The Diverse Structures and Functions of Surfactant Proteins

Surface tension at liquid–air interfaces is a major barrier that needs to be surmounted by a wide range of organisms; surfactant and interfacially active proteins have evolved for this purpose. Although these proteins are essential for a variety of biological processes, our understanding of how they elicit their function has been limited. However, with the recent determination of high-resolution 3D structures of several examples, we have gained insight into the distinct shapes and mechanisms that have evolved to confer interfacial activity. It is now a matter of harnessing this information, and these systems, for biotechnological purposes.

Interfacially active proteins fulfill a wide range of biological functions in organisms ranging from bacteria and fungi to mammals.

Their physicochemical properties make interfacially active proteins attractive for biotechnological applications; for example, as coatings on nanodevices or medical implants and as emulsifiers in food and personal-care products.

High-resolution 3D structures show that the mechanisms by which interfacially active proteins achieve their function are highly diverse.

Aqueous solubilization of C60 fullerene by natural protein surfactants, latherin and ranaspumin-2

C60 fullerene is not soluble in water and dispersion usually requires organic solvents, sonication or vigorous mechanical mixing. However, we show here that mixing of pristine C60 in water with natural surfactant proteins latherin and ranaspumin-2 (Rsn-2) at low concentrations yields stable aqueous dispersions with spectroscopic properties similar to those previously obtained by more vigorous methods. Particle sizes are significantly smaller than those achieved by mechanical dispersion alone, and concentrations are compatible with clusters approximating 1:1 protein:C60 stoichiometry. These proteins can also be adsorbed onto more intractable carbon nanotubes. This promises to be a convenient way to interface a range of hydrophobic nanoparticles and related materials with biological macromolecules, with potential to exploit the versatility of recombinant protein engineering in the development of nano-bio interface devices. It also has potential consequences for toxicological aspects of these and similar nanoparticles.

Conformations of Myoglobin-Derived Peptides at the Air-Water Interface

The conformational change exhibited by proteins at liquid interfaces, such as the air-water and oil-water interfaces, has long been of interest both for understanding protein structure outside of native environments and for applications in areas including food technology and pharmaceuticals. Using molecular simulation, this article studies the conformations of two peptides derived from myoglobin, for which the emulsification behavior has been studied. Both peptides were found to readily adsorb onto the air-water interface, with one of these (experimentally, the more effective stabilizer) adopting a flat, extended conformation and the other peptide remaining close to its solution conformation.

Connecting the dots between bacterial biofilms and ice cream

Emerging research is revealing a diverse array of interfacially-active proteins that are involved in varied biological process from foaming horse sweat to bacterial raincoat formation. We describe an interdisciplinary approach to study the molecular and biophysical mechanisms controlling the activity of an unusual bacterial protein called BslA. This protein is needed for biofilm formation and forms a protective layer or raincoat over the bacterial community, but also has a multitude of potential applications in multiphase formulations. Here we document our journey from fundamental research to an examination of the applications for this surface-active protein in ice cream.

A non-foaming proteosurfactant engineered from Ranaspumin-2

Advances in biological surfactant proteins have already yielded a diverse range of benefits from dramatically improved survival rates for premature births to artificial photosynthesis. Presented here is the design, development, and analysis of a novel biosurfactant protein we call Surfactant Resisting Foam formatioN (SRFN). Starting with the Tungara frog's foam forming protein Ranaspumin-2, we have engineered a new surfactant protein with a destabilized hinge region to alter the kinetics and equilibrium of the protein structural transition from aqueous globular form to an extended surfactant structure at the air/water interface. SRFN is capable of approximately the same total surface tension reduction, but with the unique property of forming quickly collapsible foams. The difference in foam formation is attributed to the destabilizing glycine substitutions engineered into the hinge region. Surfactants used specifically to increase wettability, such as those used in agricultural applications would benefit from this new proteosurfactant since foamed liquid has greater wind resistance and decreased dispersal. Indeed, given growing concern of organsilicone surfactant effects on declining bee populations, biological surfactant proteins have several unique advantages over more common amphiphiles in that they can be renewably sourced, are environmentally friendly, degrade readily into non-toxic byproducts, and reduce surface tension without deleterious effects on cell membranes.

Unique crystal structure of a novel surfactant protein from the foam nest of the frog Leptodactylus vastus

Breeding by releasing eggs into stable biofoams ("foam nests") is a peculiar reproduction mode within anurans, fish, and tunicates; not much is known regarding the biochemistry or molecular mechanisms involved. Lv-ranaspumin (Lv-RSN-1) is the predominant protein from the foam nest of the frog Leptodactylus vastus. This protein shows natural surfactant activity, which is assumed to be crucial for stabilizing foam nests. We elucidated the amino acid sequence of Lv-RSN-1 by de novo sequencing with mass-spectrometry and determined the high-resolution X-ray structure of the protein. It has a unique fold mainly composed of a bundle of 11 α-helices and two small antiparallel β-strands. Lv-RSN-1 has a surface rich in hydrophilic residues and a lipophilic cavity in the region of the antiparallel β-sheet. It possesses intrinsic surface-active properties, reducing the surface tension of water from 73 to 61 mN m(-1) (15 μg mL(-1)). Lv-RSN-1 belongs to a new class of surfactants proteins for which little has been reported regarding structure or function.

Recent Progress in Advanced Nanobiological Materials for Energy and Environmental Applications

In this review, we briefly introduce our efforts to reconstruct cellular life processes by mimicking natural systems and the applications of these systems to energy and environmental problems. Functional units of in vitro cellular life processes are based on the fabrication of artificial organelles using protein-incorporated polymersomes and the creation of bioreactors. This concept of an artificial organelle originates from the first synthesis of poly(siloxane)-poly(alkyloxazoline) block copolymers three decades ago and the first demonstration of protein activity in the polymer membrane a decade ago. The increased value of biomimetic polymers results from many research efforts to find new applications such as functionally active membranes and a biochemical-producing polymersome. At the same time, foam research has advanced to the point that biomolecules can be efficiently produced in the aqueous channels of foam. Ongoing research includes replication of complex biological processes, such as an artificial Calvin cycle for application in biofuel and specialty chemical production, and carbon dioxide sequestration. We believe that the development of optimally designed biomimetic polymers and stable/biocompatible bioreactors would contribute to the realization of the benefits of biomimetic systems. Thus, this paper seeks to review previous research efforts, examine current knowledge/key technical parameters, and identify technical challenges ahead.

The structure of latherin, a surfactant allergen protein from horse sweat and saliva

Latherin is a highly surface-active allergen protein found in the sweat and saliva of horses and other equids. Its surfactant activity is intrinsic to the protein in its native form, and is manifest without associated lipids or glycosylation. Latherin probably functions as a wetting agent in evaporative cooling in horses, but it may also assist in mastication of fibrous food as well as inhibition of microbial biofilms. It is a member of the PLUNC family of proteins abundant in the oral cavity and saliva of mammals, one of which has also been shown to be a surfactant and capable of disrupting microbial biofilms. How these proteins work as surfactants while remaining soluble and cell membrane-compatible is not known. Nor have their structures previously been reported. We have used protein nuclear magnetic resonance spectroscopy to determine the conformation and dynamics of latherin in aqueous solution. The protein is a monomer in solution with a slightly curved cylindrical structure exhibiting a 'super-roll' motif comprising a four-stranded anti-parallel β-sheet and two opposing α-helices which twist along the long axis of the cylinder. One end of the molecule has prominent, flexible loops that contain a number of apolar amino acid side chains. This, together with previous biophysical observations, leads us to a plausible mechanism for surfactant activity in which the molecule is first localized to the non-polar interface via these loops, and then unfolds and flattens to expose its hydrophobic interior to the air or non-polar surface. Intrinsically surface-active proteins are relatively rare in nature, and this is the first structure of such a protein from mammals to be reported. Both its conformation and proposed method of action are different from other, non-mammalian surfactant proteins investigated so far.

Peptide and protein binding to lipid monolayers studied by FT-IRRA spectroscopy

Lipid monolayers at the air-water interface represent half of a lipid bilayer and are therefore suitable model systems for studying the binding of peripheral proteins and polypeptides as well as proteins containing hydrophobic membrane anchors to membrane interfaces. Infrared reflection-absorption spectroscopy (IRRAS) of these monolayer films at the air-water interface provides information on the state of the lipid monolayers as well as on the conformational and orientational order of the film constituents. We will review shortly the experimental set-up and the possibilities for obtaining structural information before several applications of the method to lipid-protein monolayers will be described. We will focus on examples where the analysis of the protein and peptide bands for pure monolayers of these compounds are combined with experiments where the same compounds are bound to lipid monolayers. Combination of these experiments leads to detailed information about the conformational properties and the orientation of the molecules at the air-water interface in contrast to being bound to the lipid-water interface. This article is part of a Special Issue entitled: FTIR in membrane proteins and peptide studies.

pH stability and comparative evaluation of ranaspumin-2 foam for application in biochemical reactors

Aqueous channels of foam represent a simplified, natural bioreactor on the micro-/nano-scale. Previous studies have demonstrated the feasibility and potential application of foams in replicating cellular process in vitro, but no research has been performed to establish a basis for designing stable and biocompatible foam formulations. Our research has been directed specifically to the evaluation of ranaspumin-2 (RSN-2), a frog foam nest protein. The strong surfactant activity of RSN-2 enabled us to produce foams using low protein concentration (1 mg ml(-1)) over a wide pH range (pH ≥ 3). Importantly, the RSN-2 formulation exhibited the best foam stability at a near neutral pH condition, which shows a potential for application to various biosynthesis applications. Model cellular systems such as liposomes and inactivated A/PR/8/34 influenza virus maintained their physicochemical stability and full hemagglutination activity, indicating biocompatibility of RSN-2 with both cellular membranes and proteins both in bulk solution and in foam. Moreover, the addition of RSN-2 did not exert any deteriorative effects on bacterial cell growth kinetics. In contrast, Tween 20, Triton X-100, and BSA did not show satisfactory performance in terms of foamability, foam stability, physicochemcial stability, and biochemical stability. Although our study has been limited to representative formulations composed of only surfactant molecules, a number of unique advantages make RSN-2 a promising candidate for in vitro foam biosynthesis.

Developmental diversity of amphibians

The current model amphibian, Xenopus laevis, develops rapidly in water to a tadpole which metamorphoses into a frog. Many amphibians deviate from the X. laevis developmental pattern. Among other adaptations, their embryos develop in foam nests on land or in pouches on their mother's back or on a leaf guarded by a parent. The diversity of developmental patterns includes multinucleated oogenesis, lack of RNA localization, huge non-pigmented eggs, and asynchronous, irregular early cleavages. Variations in patterns of gastrulation highlight the modularity of this critical developmental period. Many species have eliminated the larva or tadpole and directly develop to the adult. The wealth of developmental diversity among amphibians coupled with the wealth of mechanistic information from X. laevis permit comparisons that provide deeper insights into developmental processes.

Crystallization and preliminary X-ray diffraction of the surfactant protein Lv-ranaspumin from the frog Leptodactylus vastus

Lv-ranaspumin is a natural surfactant protein with a molecular mass of 23.5 kDa which was isolated from the foam nest of the frog Leptodactylus vastus. Only a partial amino-acid sequence is available for this protein and it shows it to be distinct from any protein sequence reported to date. The protein was purified from the natural source by ion-exchange and size-exclusion chromatography and was crystallized by sitting-drop vapour diffusion using the PEG/Ion screen at 293 K. A complete data set was collected to 3.5 Å resolution. The crystal belonged to the orthorhombic space group P2(1)2(1)2(1), with unit-cell parameters a = 51.96, b = 89.99, c = 106.00 Å. Assuming the presence of two molecules in the asymmetric unit, the solvent content was estimated to be 54%.

Latherin and other biocompatible surfactant proteins

Horses and other equids are unusual in producing protein-rich sweat for thermoregulation, a major component of which is latherin, a highly surface-active, non-glycosylated protein that is a member of the PLUNC (palate, lung and nasal epithelium clone) family. Latherin produces a significant reduction in water surface tension at low concentrations (≤1 mg/ml), and probably acts as a wetting agent to facilitate evaporative cooling through a thick, waterproofed pelt. Latherin binds temporarily to hydrophobic surfaces, and so may also have a disruptive effect on microbial biofilms. It may consequently have a dual role in horse sweat in both evaporative cooling and controlling microbial growth in the pelt that would otherwise be resourced by nutrients in sweat. Latherin is also present at high levels in horse saliva, where its role could be to improve mastication of the fibrous diet of equids, and also to reduce microbial adherence to teeth and oral surfaces. Neutron reflection experiments indicate that latherin adsorbs to the air/water interface, and that the protein undergoes significant conformational change and/or partial unfolding during incorporation into the interfacial layer.

Biofoams and natural protein surfactants

Naturally occurring foam constituent and surfactant proteins with intriguing structures and functions are now being identified from a variety of biological sources. The ranaspumins from tropical frog foam nests comprise a range of proteins with a mixture of surfactant, carbohydrate binding and antimicrobial activities that together provide a stable, biocompatible, protective foam environment for developing eggs and embryos. Ranasmurfin, a blue protein from a different species of frog, displays a novel structure with a unique chromophoric crosslink. Latherin, primarily from horse sweat, but with similarities to salivary, oral and upper respiratory tract proteins, illustrates several potential roles for surfactant proteins in mammalian systems. These proteins, together with the previously discovered hydrophobins of fungi, throw new light on biomolecular processes at air-water and other interfaces. This review provides a perspective on these recent findings, focussing on structure and biophysical properties.

Artificial photosynthesis in ranaspumin-2 based foam

We present a cell-free artificial photosynthesis platform that couples the requisite enzymes of the Calvin cycle with a nanoscale photophosphorylation system engineered into a foam architecture using the Tungara frog surfactant protein Ranaspumin-2. This unique protein surfactant allowed lipid vesicles and coupled enzyme activity to be concentrated to the microscale Plateau channels of the foam, directing photoderived chemical energy to the singular purpose of carbon fixation and sugar synthesis, with chemical conversion efficiencies approaching 96%.

Building a home from foam--túngara frog foam nest architecture and three-phase construction process

Frogs that build foam nests floating on water face the problems of over-dispersion of the secretions used and eggs being dangerously exposed at the foam : air interface. Nest construction behaviour of túngara frogs, Engystomops pustulosus, has features that may circumvent these problems. Pairs build nests in periodic bursts of foam production and egg deposition, three discrete phases being discernible. The first is characterized by a bubble raft without egg deposition and an approximately linear increase in duration of mixing events with time. This phase may reduce initial over-dispersion of foam precursor materials until a critical concentration is achieved. The main building phase is marked by mixing events and start-to-start intervals being nearly constant in duration. During the final phase, mixing events do not change in duration but intervals between them increase in an exponential-like fashion. Pairs joining a colonial nesting abbreviate their initial phase, presumably by exploiting a pioneer pair's bubble raft, thereby reducing energy and material expenditure, and time exposed to predators. Finally, eggs are deposited only in the centre of nests with a continuously produced, approximately 1 cm deep egg-free cortex that protectively encloses hatched larvae in stranded nests.

Latherin: a surfactant protein of horse sweat and saliva

Horses are unusual in producing protein-rich sweat for thermoregulation, a major component of which is latherin, a highly surface-active, non-glycosylated protein. The amino acid sequence of latherin, determined from cDNA analysis, is highly conserved across four geographically dispersed equid species (horse, zebra, onager, ass), and is similar to a family of proteins only found previously in the oral cavity and associated tissues of mammals. Latherin produces a significant reduction in water surface tension at low concentrations (≤1 mg ml⁻¹), and therefore probably acts as a wetting agent to facilitate evaporative cooling through a waterproofed pelt. Neutron reflection experiments indicate that this detergent-like activity is associated with the formation of a dense protein layer, about 10 Å thick, at the air-water interface. However, biophysical characterization (circular dichroism, differential scanning calorimetry) in solution shows that latherin behaves like a typical globular protein, although with unusual intrinsic fluorescence characteristics, suggesting that significant conformational change or unfolding of the protein is required for assembly of the air-water interfacial layer. RT-PCR screening revealed latherin transcripts in horse skin and salivary gland but in no other tissues. Recombinant latherin produced in bacteria was also found to be the target of IgE antibody from horse-allergic subjects. Equids therefore may have adapted an oral/salivary mucosal protein for two purposes peculiar to their lifestyle, namely their need for rapid and efficient heat dissipation and their specialisation for masticating and processing large quantities of dry food material.