Biodegradable and biocompatible polyampholyte microgels derived from chitosan, carboxymethyl cellulose and modified methyl cellulose

Temperature- and pH-induced dual-crosslinked methylcellulose/chitosan-gallol conjugate composite hydrogels with improved mechanical, tissue adhesive, and hemostatic properties

Gauze or bandages are commonly used to effectively control bleeding during trauma and surgery. However, conventional treatment methods can sometimes lead to secondary damages. In recent years, there has been increased interest in developing adhesive hemostatic hydrogels as a safer alternative for achieving hemostasis. Methylcellulose (MC) is a well-known thermo-sensitive polymer with excellent biocompatibility that is capable of forming a hydrogel through physical crosslinking owing to its inherent thermo-reversible properties. However, the poor mechanical properties of the MC hydrogel comprising a single crosslinked network (SN) limit its application as a hemostatic material. To address this issue, we incorporated a chitosan-gallol (CS-GA) conjugate, which has the ability to form chemical crosslinks through self-crosslinking reactions under specific pH conditions, into the MC hydrogel to reinforce the MC hydrogel network. The resulting MC/CS-GA hydrogel with a dual-crosslinked network (DN), involving both physical and chemical crosslinks, exhibited synergistic effects of the two types of crosslinks. Thus, compared with those of the SN hydrogel, the composite DN hydrogel exhibited significantly enhanced mechanical strength and tissue adhesive properties. Moreover, the DN hydrogel presented excellent biological activity in vitro. Additionally, in rat hepatic hemorrhage models, the DN hydrogel exhibited high hemostatic efficiency, showcasing its multifunctional capabilities.

Recent advances in cellulose microgels: Preparations and functionalized applications

Microgels are soft, deformable, permeable, and stimuli-responsive microscopic polymeric particles that are now emerging as prospective multifunctional soft materials for delivery systems, interface stabilization, cell cultures and tissue engineering. Cellulose microgels are emerging biopolymeric microgels with unique characteristics such as abound hydroxyl structure, admirable designability, multiscale pore network and excellent biocompatibility. This review summarizes the fabrication strategies for microgel, then highlights the fabrication routes for cellulose microgels, and finally elaborates cellulose microgels' bright application prospects with unique characteristics in the fields of controlled release, interface stabilization, coating, purification, nutrition/drug delivery, and bio-fabrication. The challenges to be addressed for further applications and considerable scope for development in future of cellulose microgels are also discussed.

A systematic review of carbohydrate-based microneedles: current status and future prospects

Microneedles (MNs) are minimally invasive tridimensional biomedical devices that bypass the skin barrier resulting in systemic and localized pharmacological effects. Historically, biomaterials such as carbohydrates, due to their physicochemical properties, have been used widely to fabricate MNs. Owing to their broad spectrum of functional groups, carbohydrates permit designing and engineering with tunable properties and functionalities. This has led the carbohydrate-based microarrays possessing the great potential to take a futuristic step in detecting, drug delivery, and retorting to biologicals. In this review, the crucial and extensive summary of carbohydrates such as hyaluronic acid, chitin, chitosan, chondroitin sulfate, cellulose, and starch has been discussed systematically, using PRISMA guidelines. It also discusses different approaches for drug delivery and the mechanical properties of biomaterial-based MNs, till date, progress has been achieved in clinical translation of carbohydrate-based MNs, and regulatory requirements for their commercialization. In conclusion, it describes a brief perspective on the future prospects of carbohydrate-based MNs referred to as the new class of topical drug delivery systems.

Cellulose Nanocrystals Facilitate Needle-like Ice Crystal Growth and Modulate Molecular Targeted Ice Crystal Nucleation

Ice nucleators are of crucial and important implications in various fields including chemistry, climate, agriculture, and cryobiology. However, the complicated extract and biocompatibility of ice nucleators remain unresolved, and the mechanism of ice nucleation remains largely unknown. Herein, we show that natural nanocrystalline cellulose materials possess special properties to enhance ice nucleation and facilitate needle-like ice crystal growth. We reveal the molecular level mechanism that the efficient exposure of cellulose hydroxyl groups on (-110) surface leads to faster nucleation of water. We further design chitosan-decorated cellulose nanocrystals to accomplish molecular cryoablation in CD 44 high-expression cells; the cell viability shows more than ∼10 times decrease compared to cryoablation alone and does not show evident systematic toxicity. Collectively, our findings also offer improved knowledge in molecular level ice nucleation, which may benefit multiple research communities and disciplines.

Fabrication, evaluation and applications of dissolving microneedles

In recent years, transdermal preparations have emerged as one of the most promising modes of administration. In particular, dissolving microneedles have attracted extensive attention because of their painlessness, safety, high delivery efficiency and easily operation for patients. This article mainly reviews the preparation methods, the types of matrix polymer materials, the content of dissolving microneedles performance testing, and the applications of dissolving microneedles. It is expected to lay a solid knowledge foundation for the in-depth study of the dissolving microneedles.

Anticancer and Immunomodulatory Effects of Polysaccharides

Cancer is one of the leading causes of death and one of the most important public health problems in the world. And every year, millions of new cancers and hundreds of thousands of cancer-related deaths are reported worldwide. In recent decades, a number of biologically active polysaccharides and polysaccharide-protein complexes have been isolated from plants, lichen, algae, yeast, fungi and mushroom, and due to their antitumor and immunomodulatory properties, these compounds have received considerable attention. Overall, the two key mechanisms by which polysaccharides act on tumor cells are direct action (inhibition of cancer cell growth and induction of programmed cell death/apoptosis) and indirect action (stimulation of immunity). Immunosuppressive effects are recognizable in both cancer patients and tumor bearing animals, suggesting that the immune system plays an important role in the immune surveillance of cancer cells. Thus, enhancement of the host immune response has been evaluated as a possible way of inhibiting tumor growth without damaging the host. In addition to their therapeutic and prophylactic properties, the polysaccharides are effective and less toxic than chemotherapy. The anticancer activity and immunomodulatory effects of most polysaccharides have shown the promising and real potential for the benefits of human health.

Development of 4-(4,6-dimethoxy-1,3,5-triazin-2-yl)-4-methyl-morpholinium chloride cross-linked carboxymethyl cellulose films

First example of the use of 4-(4,6-dimethoxy-1,3,5-triazin-2-yl)-4-methyl-morpholinium chloride (DMTMM) as cross-linking agent for the development of carboxymethyl cellulose (CMC) films for food packaging is reported. Influence of different wt % of DMTMM and glycerol on the physical-mechanical properties of CMC films was investigated. The presence of DMTMM effectively improved moisture uptake, moisture content, water vapour permeability, water solubility of the films, oil resistance together with good biodegradability. Best compromise between high water resistance, vapour permeability and mechanical properties was accomplished with 5 wt % DMTMM and 50 wt % glycerol giving tensile strength and elongation at break of 52.25 ± 4.33 and 37.32 ± 2.04 respectively. DSC, TGA and SEM analysis further confirmed CMC cross-linking by DMTMM. All films prepared showed low opacity and high transparencies. Therefore, data reported show that DMTMM can efficiently cross-link CMC to produce films for food packaging.

Synthesis of Polyampholyte Janus-like Microgels by Coacervation of Reactive Precursors in Precipitation Polymerization

Controlling the distribution of ionizable groups of opposite charge in microgels is an extremely challenging task, which could open new pathways to design a new generation of stimuli-responsive colloids. Herein, we report a straightforward approach for the synthesis of polyampholyte Janus-like microgels, where ionizable groups of opposite charge are located on different sides of the colloidal network. This synthesis approach is based on the controlled self-assembly of growing polyelectrolyte microgel precursors during the precipitation polymerization process. We confirmed the morphology of polyampholyte Janus-like microgels and demonstrate that they are capable of responding quickly to changes in both pH and temperature in aqueous solutions.

Thermoresponsive properties of poly(N-isopropyl,N-methylacrylamide) and its statistical and block copolymers with poly(N,N-dimethylacrylamide) prepared by B(C6F5)3-catalyzed group transfer polymerization

B(C₆F₅)₃-catalyzed GTP synthesis of poly(N-isopropyl,N-methylacrylamide) as a new thermoresponsive material.

Non-transdermal microneedles for advanced drug delivery

Microneedles (MNs) have been used to deliver drugs for over two decades. These platforms have been proven to increase transdermal drug delivery efficiency dramatically by penetrating restrictive tissue barriers in a minimally invasive manner. While much of the early development of MNs focused on transdermal drug delivery, this technology can be applied to a variety of other non-transdermal biomedical applications. Several variations, such as multi-layer or hollow MNs, have been developed to cater to the needs of specific applications. The heterogeneity in the design of MNs has demanded similar variety in their fabrication methods; the most common methods include micromolding and drawing lithography. Numerous materials have been explored for MN fabrication which range from biocompatible ceramics and metals to natural and synthetic biodegradable polymers. Recent advances in MN engineering have diversified MNs to include unique shapes, materials, and mechanical properties that can be tailored for organ-specific applications. In this review, we discuss the design and creation of modern MNs that aim to surpass the biological barriers of non-transdermal drug delivery in ocular, vascular, oral, and mucosal tissue.

A compendium of current developments on polysaccharide and protein-based microneedles

Microneedles (MNs), i.e. minimally invasive three-dimensional microstructures that penetrate the stratum corneum inducing relatively little or no pain, have been studied as appealing therapeutic vehicles for transdermal drug delivery. Over the last years, the fabrication of MNs using biopolymers, such as polysaccharides and proteins, has sparked the imagination of scientists due to their recognized biocompatibility, biodegradability, ease of fabrication and sustainable character. Owing to their wide range of functional groups, polysaccharides and proteins enable the design and preparation of materials with tunable properties and functionalities. Therefore, these biopolymer-based MNs take a revolutionary step offering great potential not only in drug administration, but also in sensing and response to physiological stimuli. In this review, a critical and comprehensive overview of the polysaccharides and proteins employed in the design and engineering of MNs will be given. The strategies adopted for their preparation, their advantages and disadvantages will be also detailed. In addition, the potential and challenges of using these matrices to deliver drugs, vaccines and other molecules will be discussed. Finally, this appraisal ends with a perspective on the possibilities and challenges in research and development of polysaccharide and protein MNs, envisioning the future advances and clinical translation of these platforms as the next generation of drug delivery systems.

In Situ Silver Nanowire Deposited Cross-Linked Carboxymethyl Cellulose: A Potential Transdermal Anticancer Drug Carrier

Recently, a novel biopolymeric nanocomposite hydrogel comprised of in situ formed silver nanowires (AgNWs) deposited chemically cross-linked carboxymethyl cellulose (CMC) has been developed, which demonstrates superior efficacy as anticancer drug-curcumin carrier. The cross-linked polymer has been prepared by grafting poly [2-(methacryloyloxy) ethyl trimethylammonium chloride] on CMC using diethylene glycol dimethacrylate cross-linker. The nanocomposite hydrogel has the capability to encapsulate both hydrophobic/hydrophilic transdermal drugs. With variation in reaction conditions/parameters, several composite materials have been synthesized and depending on lower swelling/higher cross-linking and greater gel strength, an optimized grade of nanocomposite hydrogel has been selected. The developed nanocomposite hydrogel is characterized with FTIR/NMR spectra, FESEM/XRD/TGA/AFM/XPS analyses, and UV-visible spectroscopy. Rheological study has been performed to enlighten the gel strength of the composite material. The synthesized nanocomposite hydrogel is biodegradable and nontoxic to mesenchymal stem cells (hMSCs). In vitro release of curcumin suggests that in situ incorporation of AgNWs on cross-linked CMC enhanced the penetration power of nanocomposite hydrogel and released the drug in sustained way (∼62% for curcumin released in 4 days). Ex vivo rat skin permeation study confirms that the drug from both the cross-linked and nanocomposite hydrogel was permeable through the rat skin in controlled fashion. Additionally the curcumin loaded composite hydrogel can efficiently kill the MG 63 cancer cells, which has been confirmed by apoptosis study and therefore, probably be a suitable carrier for curcumin delivery toward cancer cells.

In vitro and in vivo evaluation of biodegradable embolic microspheres with tunable anticancer drug release

Natural polymer-derived materials have attracted increasing interest in the biomedical field. Polysaccharides have obvious advantages over other polymers employed for biomedical applications due to their exceptional biocompatibility and biodegradability. None of the spherical embolic agents used clinically is biodegradable. In the current study, microspheres prepared from chitosan and carboxymethyl cellulose (CMC) were investigated as a biodegradable embolic agent for arterial embolization applications. Aside from the enzymatic degradability of chitosan units, the cross-linking bonds in the matrix, Schiff bases, are susceptible to hydrolytic cleavage in aqueous conditions, which would overcome the possible shortage of enzymes inside the arteries. The size distribution, morphology, water retention capacity and degradability of the microspheres were found to be affected by the modification degree of CMC. An anticancer drug, doxorubicin, was successfully incorporated into these microspheres for local release and thus for killing cancerous cells. These microspheres demonstrated controllable degradation time, variable swelling and tunable drug release profiles. Co-culture with human umbilical vein endothelial cells revealed non-cytotoxic nature of these microspheres compared to monolayer control (P>0.95). In addition, a preliminary study on the in vivo degradation of the microspheres (100-300μm) was performed in a rabbit renal embolization model, which demonstrated that the microspheres were compatible with microcatheters for delivery, capable of occluding the arteries, and biodegradable inside arteries. These microspheres with biodegradability would be promising for embolization therapies.

Self-assembly of conjugated polymer on hybrid nanospheres for cellular imaging applications

A new kind of hybrid core-shell nanosphere was fabricated by combining the in situ formation of Au nanoparticles and covalent cross-linking of biocompatible carboxymethyl starch dialdehyde (CMSD) and chitosan (CTS). When the fluorescent dye poly[9,9'-bis(6″-(N,N,N-trimethylammonium)-hexyl)fluorene-2,7-ylenevinylene-co-alt-1,4-phenylene dibromide] (PFV) was assembled on the surface of the hybrid nanospheres through electrostatic attraction, these biocompatible hybrid nanospheres exhibited metal-enhanced fluorescence effects. The fluorescence intensity of (CTS-Au)@CMSD/PFV hybrid nanosphere is 1.43 times that of CTS-CMSD/PFV hybrid nanospheres lacking Au nanoparticle. In addition, the (CTS-Au)@CMSD/PFV hybrid nanospheres exhibit excellent biodegradability upon exposure to enzymatic aqueous solution and good biocompatibility when cocultured with HeLa cervical carcinoma cells; these advantages make them attractive for cellular imaging and biological analysis and detection.