Application of natural biosorbent and modified peat for bisphenol a removal from aqueous solutions

A study on the performance of a novel adsorbent UiO-66 modified by a nickel on removing tetracycline in wastewater

In the present study, Ni-UiO-66 was synthesized to improve the adsorption efficiency of tetracycline (TC) in wastewater treatment. To this end, nickel doping was performed in the preparation process of UiO-66. The synthesized Ni-UiO-66 was characterized by XRD, SEM and EDS, BET, FTIR, TGA, and XPS for obtaining the lattice structure, surface topography, specific surface area, surface functional groups, and thermostability. More specifically, Ni-UiO-66 has a removal efficiency and adsorption capacity of up to 90% and 120 mg g-1, respectively, when used to treat TC. The presence of ions HCO3-, SO42-, NO3- and PO43- slightly affects the TC adsorption. A 20 mg L-1 humic acid reduces the removal efficiency from 80% to 60%. The performed analyses revealed that Ni-UiO-66 had similar adsorption capacity in wastewater with different ion strengths. The variation of adsorption capacity with the adsorption time was fitted using a pseudo-second-order kinetic equation. Meanwhile, it is found that the adsorption reaction occurs only on the monolayer of the UiO-66 surface so the adsorption process can be simulated using the Langmuir isotherm model. The thermodynamic analysis indicates that the adsorption of TC is an endothermic reaction. Electrostatic attraction, hydrogen-bond interaction, and π-π interaction might be the main reasons for the adsorption. The synthesized Ni-UiO-66 has well adsorption capacity and stable structure. Accordingly, it is expected to achieve a good prospect in industrial applications and wastewater treatment plants.

Current progress in treatment technologies for plastic waste (bisphenol A) in aquatic environment: Occurrence, toxicity and remediation mechanisms

Bisphenol-A (BPA) is a type of endocrine disrupting compound (EDC) that is being widely used in the production of polycarbonate and epoxy resins. In the last few years, human exposure to BPA has been extensively high due to the continuous increment in the Annual Growth Rate (AGR) of the BPA global market. The presence and transportation of BPA in the environment could cause serious damage to aquatic life and human health. This paper reviewed the literature on the exposure and toxicity mechanisms of BPA and advanced analytical techniques for the detection of BPA in the environment and human beings. The study indicated that BPA can cause damaging effects on numerous tissues and organs, including the reproductive system, metabolic dysfunction, respiratory system, immune system and central nervous system. On the basis of reported studies on animals, it appears that the exposure of BPA can be carcinogenic and responsible for causing a variety of cancers like ovarian cancer, uterine cancer, prostate cancer, testicular cancer, and liver cancer. This review paper focused mainly on the current progress in BPA removal technologies within last ten years (2012-2022). This paper presents a comprehensive overview of individual removal technologies, including adsorption, photocatalysis/photodegradation, ozonation/advance oxidation, photo-fenton, membranes/nanofilters, and biodegradation, along with removal mechanisms. The extensive literature study shows that each technology has its own removal mechanism and their respective limitations in BPA treatment. In adsorption and membrane separation process, most of BPA has been treated by electrostatic interaction, hydrogen boning and π-π interations mechanism. Whereas in the degradation mechanism, O* and OH* species have played a major role in BPA removal. Some factors could alter the removal potential and efficiency of BPA removal. This review paper will provide a useful guide in providing directions for future investigation to address the problem of BPA-containing wastewater treatment.

Potential of biocompatible calcium-based metal-organic frameworks for the removal of endocrine-disrupting compounds in aqueous environments

Rapid urbanization, industrialization and population growth have accelerated the amount and variety of emerging contaminants being released into the aqueous environment, including endocrine-disrupting compounds (EDCs). The introduction of these compounds constitutes a threat to human health and the environment, even at trace levels. Hence, new water treatment technologies are urgently required to effectively remove EDCs from water. The currently available technologies used in water remediation processes are expensive and ineffective, and some produce harmful by-products. Calcium-based metal-organic frameworks (Ca-MOFs) are porous synthetic materials that can potentially be applied as adsorbents. These MOFs are hydrolytically stable, biocompatible and low-cost compared with conventional porous materials. The structure of Ca-MOFs is maintained even though calcium metal centers in the structure can easily coordinate with water. Ca-MOFs and their composite derivatives have the potential for use in water purification because these biocompatible adsorbents have been shown to selectively extract a significant quantity of contaminants. This review highlights the potential of Ca-MOFs to adsorb EDCs from aqueous environments and discusses adsorbent preparation methods, adsorption mechanisms, removal capacity, water stability and recyclability. This review will support future efforts in synthesizing new biocompatible MOFs as an environmental treatment technology that can effectively remove EDCs from water, thereby improving environmental and human health.

Adsorption behavior of bisphenol A on bentonite-loess mixtures

The leakage of chemical compounds in landfill leachate led to serious environment pollution, especially, the compounds termed endocrine disruptors such as bisphenol A (BPA). It is very important to study the adsorption behavior of endocrine disruptors in modified soil for predicting and evaluating the potential harm of endocrine disruptors to the soil. Bentonite-amended Chinese loess mixtures, with various proportions of bentonite, were used for the removal of BPA from an aqueous solution. A batch test was used to investigate the adsorption properties of bisphenol A on bentonite and Chinese loess mixtures. The influences of bentonite proportion, temperature, reaction time, pH, and soil-water ratios on the adsorption process were considered. The Fourier transform infrared spectra (FTIR) was used to clarify the change of functional groups before and after the adsorption of BPA on soil. The adsorption mechanism of BPA on soil was discussed preliminary. The results show that the addition of bentonite to the loess can improve the adsorption rate of BPA. The adsorption of BPA was mainly a spontaneous, exothermic, entropy decreasing physical adsorption process. The interaction between bentonite content and reaction concentration had a beneficial effect on BPA adsorption. The linear relationship between bentonite content and adsorption capacity was obtained. The results indicate that bentonite amended loess can provide a good liner for BPA.

Removal of organic pollutants from aqueous solution using metal organic frameworks (MOFs)-based adsorbents: A review

The development of metal organic frameworks (MOFs) has recently drawn a lot of scientific interest in water treatment due to the unique properties such as tunable porosities, large pore volumes, hierarchical structures, excellent adsorption and regeneration performances. MOFs represent an eco-friendly alternative to conventional adsorbents especially for the adsorptive removal of noxious organic pollutants from aqueous solution. Advanced MOFs' performances are justified by the introduction of functional groups, magnetic moieties, and specific foreign materials onto MOFs. This however leads to increase in the manufacturing costs of MOFs and consequently possess a huge challenge in large-scale applications. This review hence critically discusses the recent progresses in the development of MOFs-based adsorbents for the removal of selected organic pollutants (e.g., dyes, antibiotics and pesticides) from aqueous solution. Furthermore, major interaction mechanisms between MOFs and organic pollutants in response to numerous experimental conditions, such as pH, temperature, coexisting ions are put forward. Finally, some recommendations in support for designing MOFs with improved adsorption performances are also highlighted.

An Insight into a Sustainable Removal of Bisphenol A from Aqueous Solution by Novel Palm Kernel Shell Magnetically Induced Biochar: Synthesis, Characterization, Kinetic, and Thermodynamic Studies

Recently Bisphenol A (BPA) is one of the persistent trace hazardous estrogenic contaminants in the environment, that can trigger a severe threat to humans and environment even at minuscule concentrations. Thus, this work focused on the synthesis of neat and magnetic biochar (BC) as a sustainable and inexpensive adsorbent to remove BPA from aqueous environment. Novel magnetic biochar was efficiently synthesized by utilizing palm kernel shell, using ferric chloride and ferrous chloride as magnetic medium via chemical co-precipitation technique. In this experimental study, the influence of operating factors comprising contact time (20-240 min), pH (3.0-12.0), adsorbent dose (0.2-0.8 g), and starting concentrations of BPA (8.0-150 ppm) were studied in removing BPA during batch adsorption system using neat biochar and magnetic biochar. It was observed that the magnetically loaded BC demonstrates superior maximum removal efficiency of BPA with 94.2%, over the neat biochar. The functional groups (FTIR), Zeta potential, vibrating sample magnetometer (VSM), surface and textural properties (BET), surface morphology, and mineral constituents (FESEM/EDX), and chemical composition (XRD) of the adsorbents were examined. The experimental results demonstrated that the sorption isotherm and kinetics were suitably described by pseudo-second-order model and Freundlich model, respectively. By studying the adsorption mechanism, it was concluded that π-π electron acceptor-donor interaction (EAD), hydrophobic interaction, and hydrogen bond were the principal drives for the adsorption of BPA onto the neat BC and magnetic BC.

Effective adsorption of bisphenol A from aqueous solution over a novel mesoporous carbonized material based on spent bleaching earth

In this study, the novel mesoporous carbonized material (HSBE/C) was prepared from clay/carbon composite (SBE/C) treated with hydrofluoric acid (HF) for the first time, and was employed to efficiently adsorb bisphenol A (BPA) in water. Specifically, SBE/C was derived from the pyrolysis of spent bleaching earth (SBE), an industrial waste. HF removed SiO₂ from SBE/C and increased the specific surface area of HSBE/C (from 100.21 to 183.56 m²/g), greatly providing more adsorption sites for enhanced BPA adsorption capacity. The Langmuir monolayer maximum adsorption capacity of HSBE/C (103.32 mg/g) was much higher than the commercial activated carbon (AC) (42.53 mg/g). The adsorption process by HSBE/C followed well with the Freundlich isotherm model and the pseudo-second-order kinetic model and also was endothermic (ΔH⁰ > 0) and spontaneous (ΔG⁰ < 0). Based on the systematic characterization and factor experiment (temperature, dosage, initial pH, co-existing ions), BPA adsorption mechanism by HSBE/C likely included the hydrogen bonding, electrostatic interaction, and hydrophobic interaction. Moreover, there was no secondary pollution during the total adsorption process. Extraordinary, HSBE/C manifested stability by NaOH desorption regeneration. This study provides a new sight for application of waste-based materials as the promising adsorbents in the treatment of endocrine disruptors.

Adsorption performance of modified agricultural waste materials for removal of emerging micro-contaminant bisphenol A: A comprehensive review

This review is an attempt to assess the adsorption performance of different green adsorbents derived from agricultural waste materials (AWMs) that were used for the elimination of bisphenol A (BPA) from aqueous matrices. Different processes including grafting, polymerization, activation and chemical treatment have been applied to functionalize and modify agricultural waste materials for the purposes of increasing their adsorptive performances toward BPA. The highest reported adsorption capacity of adsorbent from agricultural waste for the uptake of BPA is the highly microporous carbon adsorbent derived from Argan nut shell (1408 mg g^-1). Hydrogen bonding, hydrophobic and π-π interactions were reported in most studies as the main mechanisms governing the adsorption of BPA onto agricultural waste adsorbents. Equilibrium isotherm and kinetic studies for the uptake of BPA onto agricultural waste adsorbents were best described by Langmuir/Freundlich model and pseudo-second order model, respectively. Despite the effective elimination of BPA by various agricultural waste adsorbents, an appropriate selection of elution solvent is important for effective desorption of BPA from spent adsorbent. To date, ethanol, diethyl ether-methanol, methanol-acetic acid, mineral acids and sodium hydroxide are the most eluents applied for desorption of BPA molecules loaded onto AW-adsorbents. Looking toward the future, studies on the agricultural waste adsorbents based on polymers, activated carbons, nanoparticles and highly microporous carbons should be mostly considered by the researchers toward removing BPA. These future studies should be performed both in laboratory, pilot and industrial scales, and also should report the sustainable techniques for disposal of the spent AW-adsorbents after lose their adsorption performance on BPA.

Bisfenol A adsorption using a low-cost adsorbent prepared from residues of babassu coconut peels

Nowadays, the occurrence of microcontaminants in water resources has become a worldwide concern. Among them, it can be mentioned Bisphenol A, a substance widely used in the chemical composition of plastic such as manufacture of packages, bottles, toiletries, among others. Its use may cause adverse effects on human health and the environment. Thus, a treatment is necessary to remove this compound and adsorption is an interesting alternative due to its low cost, operation and high efficiency. The objective of the present study was to evaluate the adsorption capacity of bisphenol in babassu activated carbon. The obtained results were satisfactory and the best experimental conditions were at 318 K temperature, 1 g L^-1 adsorbent concentration and 720 min equilibrium time, resulting in the maximum adsorptive capacity of 49.61 mg g^-1. The experimental data fit best with the pseudo-second order and Langmuir models for the kinetic and equilibrium studies, respectively. Thermodynamic parameters indicated endothermic, spontaneous and reversible process. The main adsorption mechanisms were hydrogen bonds and π-π interactions. In addition, the material regeneration study allowed to verify its possibility of reuse. Therefore, it was noticed that babassu activated carbon has high potential applicability in the treatment of contaminated water.

Decontamination of bisphenol A and Congo red dye from solution by using CTAB functionalised walnut shell

In this research, the eco-friendly cationic surfactant modified walnut shell (WNS-CTAB) was synthesised to enhance the uptake for bisphenol A (BPA) and Congo red (CR) from aqueous solution. The characterisation of WNS-CTAB was performed using Fourier-transform infrared (FTIR), X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM), etc. to know its physiochemical properties. The adsorption equilibrium results were best described by the Langmuir isotherm model, which confirmed the monolayer adsorption of the pollutant molecules onto the adsorbent's surface. The maximum monolayer adsorption quantity of WNS-CTAB was established to be 38.5 mg g^-1 for BPA and 104.4 mg g^-1 for CR at 303 K, respectively. Pseudo-second-order kinetic models described the adsorption kinetics of both BPA and CR. Furthermore, the intra-particle diffusion was applied to analyse the kinetic results and was established that the rate was not solely controlled by diffusion. The mechanisms associated with BPA and CR adsorption onto the WNS-CTAB may include van der Waals interaction, hydrophobic interaction, and electrostatic force. WNS-CTAB demonstrated a good reusability potential with desorption through three successive adsorption-desorption cycles performed in both experiments. Moreover, in the binary system, the adsorption capacity of BPA witnessed a 66% decrease while CR saw marginal reduction of 8.0 %. This suggests that WNS-CTAB had a higher affinity for binding to CR with higher selectivity as compared with BPA. Therefore, WNS-CTAB has exhibited huge potential to serve as a functional material for practical use in the treatment of wastewater.

A novel hollow-sphere cyclodextrin nanoreactor for the enhanced removal of bisphenol A under visible irradiation

A novel hybrid nanoreactor with spatially separated co-catalysts (SH-CD-Au@CdS@MnO_x) was successfully synthesised to remove bisphenol-A (BPA) from water by visible light. The photooxidation intermediates, degradation pathway of BPA and the enhancement mechanism were investigated in particular. Gold (Au) nanoparticles modified with SH-β-cyclodextrin and MnO_x nanoparticles were selectively decorated on the interior and exterior surface of hollow CdS nanoreactors, respectively. The directed migration of photogenerated electrons and holes induced by spatially separated co-catalysts lead to high utilization of light, and SH-β-cyclodextrin modification makes catalytic active sites more accessible for oxidation intermediates. Compared with pristine CdS, the hybrid nanoreactor increased the BPA photooxidation reaction rate and the TOC removal efficiency by 5.6-fold and 3.6-fold, respectively. Moreover, the toxic intermediates, such as phenol, were further degraded by visible light. Molecular orbital calculation predicted that the sites on BPA molecule values of (FED²_HOMO + FED²_LUMO) can be easier attacked by the radical, whereas atoms with higher values of 2FED²_HOMO can easily be extracted into electrons. Thus, SH-CD-Au@CdS@MnO_x can provide a new strategy for the high-efficiency photodegradation of endocrine disrupter compounds in advanced water treatments.

Sorption of organic pollutants frequently detected in stormwater: evaluation of five potential sorbents

Adsorption filtration is one of the most promising techniques for removal of dissolved, colloidal and particulate pollutants from stormwater. The aim of this study was to compare the capacity of five filter materials - cellulose, chitosan, chitosan-covered bark, pine bark and polypropylene/polyethylene (PP/PE) fibres - to sorb organic pollutants frequently detected in stormwater, including polycyclic aromatic hydrocarbons (PAHs), alkylphenols and phthalates. In batch tests, synthetic stormwater spiked with a mixture of the organic compounds was contacted with the materials for up to 24 h. The compounds were then liquid-liquid extracted and analysed using GC-MS. Cellulose and chitosan showed very low sorption capacity for the organic contaminants, whereas >70% of the initial concentration of most tested compounds was removed using PP/PE fibres, and >80% with pine bark and chitosan-covered bark. The highest adsorption capacity was found for PAHs (up to 44 µg/g) using PP/PE fibres and bark. For all tested compounds, maximum sorption was approached within 30 min using these materials.

Performance of biochar derived from rice straw for removal of Ni(II) in batch experiments

Biochar, as a cost-efficient adsorbent, is of major interest in the removal of heavy metals from wastewater. Herein, batch experiments were conducted to investigate the performance of biochar derived from rice straw for the removal of Ni(II) as a function of various environmental conditions. The results showed that Ni(II) sorption was strongly dependent on pH but independent of ionic strength and the effects of electrolyte ions could be negligible over the whole pH range. Ionic exchange and inner-sphere surface complexation dominated the sorption of Ni(II). Humic/fulvic acids clearly enhanced the Ni(II) sorption at pH <7.2 but inhibited the sorption at pH >7.2. The sorption reached equilibrium within 10 hours, and the kinetics followed a pseudo-second-order rate model. Any of the Langmuir, Freundlich, or Dubinin-Radushkevich isotherm models could describe the sorption well, but the Langmuir model described it best. The maximum sorption capacity calculated from the Langmuir model was 0.257 m·mol/g. The thermodynamic parameters suggested that Ni(II) sorption was a spontaneous and endothermic process and was enhanced at high temperature. The results of this work indicate that biochar derived from rice straw may be a valuable bio-sorbent for Ni(II) in aqueous solutions, but it still requires further modification.

Biosurfactant rhamnolipid enhanced modification of corn stalk and its application for sorption of phenanthrene

The application of modified agricultural wastes for removing polycyclic aromatic hydrocarbons (PAHs) from water is gaining a growing interest. However, most modified methods using synthetic chemicals may cause secondary pollution. To overcome this limitation, in this study, a rhamnolipid modified corn stalk (RL-CS) for the removal of phenanthrene (PHE) from aqueous solution was prepared using a rhamnolipid-enhanced acid modification method. RL-CS with higher surface area and lower polarity exhibited higher PHE removal efficiency than that of raw corn stalk (RCS). The adsorption kinetics of RL-CS fitted well with pseudo-second-order kinetics (R² > 0.999). Sorption coefficients and carbon-normalized sorption coefficient of RL-CS were 4.68 and 2.86 times higher than that of RCS. Sorption process of RL-CS was nonlinear. Meanwhile, the sorption was an exothermic process and could occur spontaneously. The present study demonstrated that biosurfactant-modified biosorbent RL-CS may be of great potential for the removal of low concentrations of PAHs from the contaminated waters.

Kinetic and isotherm studies of bisphenol A adsorption onto orange albedo(Citrus sinensis): Sorption mechanisms based on the main albedo components vitamin C, flavones glycosides and carotenoids

Orange albedo and its adsorption capacity towards bisphenol A (BPA) were studied. Adsorption experiments were conducted in batch mode at 25-55°C. Scanning electron microscopy (SEM), Energy dispersive X-ray spectroscopy (EDX), X-ray diffraction (XRD), Brunauer-Emmett-Teller (BET) and Fourier transform infrared (FTIR) spectroscopy were used to characterise the biosorbent. The effects of various parameters including adsorption time, equilibrium pH, adsorbent dosage and initial adsorbate concentration were investigated. The optimum contact time and pH for the removal of BPA were 60 min and 2, respectively. It was found that the adsorption isotherms best matched the Freundlich model, the adsorption of BPA being multilayer and that of the albedo surface heterogeneous. From the kinetic studies, it was found that the removal of BPA best matched the pseudo-second order kinetic model. An adsorption mechanism based on the albedo surface molecules is proposed and gives a good account of π-π interactions and hydrogen bonding. Orange albedo, with a maximum BPA loading capacity of 82.36 mg g^-1 (significantly higher than that of most agricultural residues), is a good candidate for BPA adsorption in aqueous media.

Adsorptive removal of bisphenol A (BPA) from aqueous solution: A review

Endocrine-disrupting compounds (EDCs) are an important class of emerging contaminants that have been detected (and are still being detected) in aquatic environments such as surface waters, groundwater, wastewater, runoff, and landfill leachates. Bisphenol A (BPA) is a known endocrine disruptor that is acutely toxic to the living organisms. BPA has been widely used in the manufacture of sunscreen lotions, nail polish, body wash/lotions, bar soaps, shampoo, conditioners, shaving creams, and face lotions/cleanser, besides its other industrial applications. In the present review, an overview of the recent research studies dealing with the BPA removal from water by adsorption method is presented. We have reviewed various conventional and non-conventional adsorbents which have been used for BPA removal from water. It is evident from the literature reviewed that modified adsorbents and composite materials have shown promising results for BPA removal from water. Literature has been extensively discussed in terms of adsorption capacities, fitted isotherm and kinetic models and thermodynamic aspects.

Algal biomass from the stable growth phase as a potential biosorbent for Pb(ii) removal from water

In this study, the effect of the growth phase on the Pb(ii) removal performance from water usingChlorellasp. QB-102 dry biomass was investigated.

Fabrication of hydrochar functionalized Fe–Mn binary oxide nanocomposites: characterization and 17β-estradiol removal

In this work, Fe–Mn binary oxide modified hydrochar (hydrochar-FMBO) was successfully prepared by deposition of Fe–Mn binary oxide (FMBO) nanoparticles on pristine hydrochar.

Removal of bisphenol A and some heavy metal ions by polydivinylbenzene magnetic latex particles

In this study, magnetic polydivinylbenzene latex particles MPDVB with a core-shell structure were tested for the removal of bisphenol A (BPA), copper Cu(II), lead Pb(II), and zinc Zn(II) from aqueous solutions by a batch-adsorption technique. The effect of different parameters, such as initial concentration of pollutant, contact time, adsorbent dose, and initial pH solution on the adsorption of the different adsorbates considered was investigated. The adsorption of BPA, Cu(II), Pb(II), and Zn(II) was found to be fast, and the equilibrium was achieved within 30 min. The pH 5-5.5 was found to be the most suitable pH for metal removal. The presence of electrolytes and their increasing concentration reduced the metal adsorption capacity of the adsorbent. Whereas, the optimal pH for BPA adsorption was found 7, both hydrogen bonds and π-π interaction were thought responsible for the adsorption of BPA on MPDVB. The adsorption kinetics of BPA, Cu(II), Pb(II), and Zn(II) were found to follow a pseudo-second-order kinetic model. Equilibrium data for BPA, Cu(II), Pb(II), and Zn(II) adsorption were fitted well by the Langmuir isotherm model. Furthermore, the desorption and regeneration studies have proven that MPDVB can be employed repeatedly without impacting its adsorption capacity.

Removal of bisphenol A by iron nanoparticle-doped magnetic ordered mesoporous carbon

Iron nanoparticle-doped magnetic ordered mesoporous carbon (Fe/OMC) was prepared by co-impregnation and carbothermal reduction methods, and used for highly effective adsorption and degradation of bisphenol A (BPA).

Evaluation of low-cost materials for sorption of hydrophobic organic pollutants in stormwater

Conventional stormwater treatment techniques such as sedimentation and filtration are inefficient for removing the dissolved and colloidal phases of hydrophobic organic compounds (HOCs) present in stormwater. Adsorption could be a promising technique for removing colloidal and dissolved pollutants. Five low-cost sorbent materials were investigated in this project, including two minerals – vermiculite and perlite – and three waste products – two pine barks and a sawdust – as potential adsorbents for removal of polycyclic aromatic hydrocarbons (PAHs), alkylphenols and phthalates; HOCs commonly found in stormwater. Adsorption capacity and kinetics were studied through batch adsorption tests using synthetic stormwater spiked with a mixture of HOCs. Vermiculite and perlite exhibited insignificant removal of the organic contaminants. The three wood-based materials retained >80% of the initial HOC concentration (10-300 μg/L). The two barks exhibited slightly higher adsorption capacities of HOCs than the sawdust. For all compounds tested, maximum adsorption onto the wood-based media was reached in <10 min. The highest adsorption capacity was found for PAHs (up to 45 μg/g), followed by alkylphenols and phthalates. No correlation was found between adsorption capacity and physical-chemical parameters such as solubility and partition coefficients (log K(ow)). Agreement between empirical data and the pseudo-second order kinetic model suggest chemisorption of HOCs onto a monolayer on wood-based media. This could lead to early saturation of the materials and should be investigated in future studies through repeated adsorption of HOCs, for example in column studies.

Phytodegradation potential of bisphenolA from aqueous solution by Azolla Filiculoides

Many organic hazardous pollutants such as bisphenolA (BPA) which are toxic and not easily biodegradable can concerns for environmental pollution worldwide. The objective of this study was to examine whether Azolla Filiculoides is able to remove BPA from aqueous solutions. In this study, the Azolla with different biomass (0.3, 0.6, 0.9, 1.2 g) has been cultured in solution that was contained 5, 10, 25 and 50 ppm BPA. Samples were collected every 2 days from all of containers. The analytical determination of BPA was performed by using of DR4000 uv-visible at λmax = 276 nm. The results indicated that Azolla has high ability to remove BPA from aqueous solutions. The BPA removal was 60-90%. The removal efficiency is increasing with decreasing of BPA concentration and increasing of biomass amount and vice versa. The removal efficiency was more than 90% when BPA concentration was 5 ppm and amount of biomass was 0.9gr. It is concluded that Azolla able remove BPA by Phytodegradation from the aqueous solutions. Since conventional methods of BPA removal need to high cost and energy, phytoremediation by Azolla as a natural treatment system can decrease those issues and it can be a useful and beneficial method to removal of BPA.