Turbidity and rheological properties of bovine serum albumin/pectin coacervates: Effect of salt concentration and initial protein/polysaccharide ratio

Critical Review of Food Colloidal Delivery System for Bioactive Compounds: Physical Characterization and Application

Bioactive compounds (BACs) have attracted much attention due to their potential health benefits. However, such substances have problems such as difficulty dissolving in water, poor stability, and low intestinal absorption, leading to serious limitations in practical applications. Nowadays, food colloidal delivery carriers have become a highly promising solution due to their safety, controllability, and efficiency. The use of natural macromolecules to construct delivery carriers can not only regulate the solubility, stability, and intestinal absorption of BACs but also effectively enhance the nutritional added value of functional foods, improve sensory properties, and extend shelf life. Moreover, smart-responsive colloidal delivery carriers can control the release characteristics of BACs, thus improving their absorption rate in the human body. This review describes the characteristics of several typical food colloid delivery carriers, focuses on their physical properties from static structure to dynamic release, summarizes their applications in delivery systems, and provides an outlook on the future development of food colloid delivery carriers. The different compositions and structures of food colloids tend to affect their stability and release behaviors, and the different surface properties and rheological characteristics of the carriers predestine their different application scenarios. The control of in vivo release properties and the effect on food media should be emphasized in the future exploration of safer and more controllable carrier systems.

Coacervate Formation in Dilute Aqueous Solutions of Inorganic Molecular Clusters with Simple Divalent Countercations

We report a complex coacervate formed by a 2.5 nm-diameter, rigid uranyl peroxide molecular cluster (Li68K12(OH)20)[UO2(O2)OH]60, U6060-) and SrCl2 salt in dilute aqueous solutions, including its location in the phase diagram, composition, rheological features, and critical conditions for phase transitions. In this coacervate, the Sr2+ cations are a major building component, and the coacervate phase covers a substantial region of the phase diagram. This coacervate demonstrates features that differ from traditional coacervates formed by oppositely charged long-chain polyelectrolytes, especially in its formation mechanism, dehydration, enhancement of mechanical strength with increasing ionic strength, and the change of salt partition preference into the coacervate and supernatant phases with ionic strength.

Coacervating behavior of amino acid anionic and amphoteric mixed micelle-polymer

In this paper, coacervates were formed with mixed micelles consisting of the anionic amino acid surfactant sodium lauroylsarcosinate (NLS) and amphoteric surfactant cocamidopropyl betaine (CAPB) in combination with cationic guar gum. Based on personal care formulation studies, coacervates were prepared by diluting a concentrated system with water to better suit the product application process. The phase behavior during dilution was revealed by turbidity, which was influenced by the mixed micelle ratio (X), salt concentration, and dilution ratio (R). Optical microscopy, cryo-SEM, SAXS and rotational rheometry were used to characterize the structure and properties of the coacervates, which strongly depended on the interaction strength between the polymer and micelles. Dominated by electrostatic interactions, the coacervates exhibited a dense porous structure with low water content and a high viscoelastic modulus, while weakened interactions resulted in a looser mesh internal structure with lower viscoelasticity, enhancing skin adsorption. These findings enhance our understanding of polymer-mixed micelle systems and offer practical strategies for controlling the properties of coacervates.

Preparation and drug release performance of different gelation type polysaccharide/β-lactoglobulin fiber composite gels

Self-assembled protein fibers have attracted much attention in the fields of medicine and food because of their high aspect ratio, polymorphic structure and strong surface hydrophobicity. In this study, three different gelation types of polysaccharides/β-lactoglobulin fiber (Fblg) composite gels, including ionic alginate-Fblg gels, synergistic xanthan-Fblg gels, and double network agar-Fblg gels, were first prepared. The interactions between the polysaccharides and the Fblgs, the microstructure and mechanical properties of the composite gels were investigated using the light scattering, scanning electron microscopy, rheology and texture analysis in order to reveal their formation mechanisms. Then the loading and release properties of the water-soluble drug 5-fluorouracil (5-FU) and the hydrophobic drug curcumin (Cur) through these composite gels were further studied with release mechanisms determined by fitting different release models. It was found that the mechanical properties of the composite gels were determined by the mesh density of the three-dimensional networks formed inside the gels. The network structure and mechanical strength of the alginate-Fblg gels became weaker with the increase of Fblg content at pH 4 due to their attractive interaction which hindered the binding of Ca2+ to ALG, while the network and the strength of the alginate-Fblg gels didn't change much at pH 7 due to the repulsion between Alg and Fblg. The xanthan-Fblg gels formed lamellar structures with enhanced gel network and mechanical strength due to the hydrogen bonding and the electrostatic interaction with Fblg. The Agar-Fblg composite gel formed at 60 °C (above the gelation temperature of agar of 40 °C) had a denser double network structure and higher mechanical strength than that formed at 0 °C due to inhibition of diffusion of Ca2+ as salt bridges for Fblg. The hydrophilic drugs were loaded in the meshes of the composite gels and their release was determined by the structure of the composite gel networks, whereas the hydrophobic drugs were loaded by attaching to the Fblgs in the composite gels and their release was determined by the loading ability and strength of the gels. The study not only provided a new idea for the preparation and application of polysaccharide-protein fiber composite hydrogels, but also provided insights for improving the efficiency of drug carriers.

Fabrication and characterization of complex coacervates utilizing gelatin and carboxymethyl starch

BACKGROUND

Modified polysaccharides have greatly expanded applications in comparison with native polysaccharides due to their improved compatibility and interactions with proteins and active compounds in food-related areas. Nonetheless, there is a noticeable dearth of research concerning the utilization of carboxymethyl starch (CMS) as a microcapsule wall material in food processing, despite its common use in pharmaceutical delivery. The development of an economical and safe embedding carrier using CMS and gelatin (GE) holds immense importance within the food-processing industry. In this work, the potential of innovative coacervates formed by the combination of GE and CMS as a reliable, stable, and biodegradable embedding carrier is evaluated by turbidity measurements, thermogravimetric analysis (TGA), X-ray diffraction (XRD), Fourier transform infrared (FTIR) spectroscopy, and rheological measurements.

RESULTS

The results indicate that GE-CMS coacervates primarily resulted from electrostatic interactions and hydrogen bonding. The optimal coacervation was observed at pH 4.6 and with a GE/CMS blend ratio of 3:1 (w/w). However, the addition of NaCl reduced coacervation and made it less sensitive to temperature changes (35-55 °C). In comparison with individual GE or CMS, the coacervates exhibited higher thermal stability, as shown by TGA. X-ray diffraction analysis shows that the GE-CMS coacervates maintained an amorphous structure. Rheological testing reveals that the GE-CMS coacervates exhibited shear-thinning behavior and gel-like properties.

CONCLUSION

Overall, attaining electroneutrality in the mixture boosts the formation of a denser structure and enhances rheological properties, leading to promising applications in food, biomaterials, cosmetics, and pharmaceutical products. © 2023 Society of Chemical Industry.

Ultra-stable pickering emulsion stabilized by anisotropic pea protein isolate-fucoidan conjugate particles through Maillard reaction

Bio-based emulsifiers hold significant importance in various industries, particularly in food, cosmetics, pharmaceuticals and other related fields. In this study, pea protein isolate (PPI) and fucoidan (FUD) were conjugated via the Maillard reaction, which is considered safe and widely used in the preparation of food particle. The PPI-FUD conjugated particles exhibit an anisotropic non-spherical structure, thereby possessing a high detachment energy capable of preventing emulsion coalescence and Ostwald ripening. Compared to emulsions previously prepared in other studies (< 500 mM), the Pickering emulsion stabilized by PPI-FUD conjugate particles demonstrates outstanding ionic strength resistance (up to 5000 mM). Furthermore, when encapsulating curcumin, the Pickering emulsion protects the curcumin from oxidation. Additionally, the formulated emulsions demonstrated the capability to incorporate up to 60 % (v/v) oil phase, revealing remarkable performance in terms of storage stability, pH stability, and thermal stability.

Advances in protein-based microcapsules and their applications: A review

Due to their excellent emulsification, biocompatibility, and biological activity, proteins are widely used as microcapsule wall materials for encapsulating drugs, natural bioactive substances, essential oils, probiotics, etc. In this review, we summarize the protein-based microcapsules, discussing the types of proteins utilized in microcapsule wall materials, the preparation process, and the main factors that influence their properties. Additionally, we conclude with examples of the vital role of protein-based microcapsules in advancing the food industry from primary processing to deep processing and their potential applications in the biomedical, chemical, and textile industries. However, the low stability and controllability of protein wall materials lead to degraded performance and quality of microcapsules. Protein complexes with polysaccharides or modifications to proteins are often used to improve the thermal instability, pH sensitivity, encapsulation efficiency and antioxidant capacity of microcapsules. In addition, factors such as wall material composition, wall material ratio, the ratio of core to wall material, pH, and preparation method all play critical roles in the preparation and performance of microcapsules. The application area and scope of protein-based microcapsules can be further expanded by optimizing the preparation process and studying the microcapsule release mechanism and control strategy.

Design of gum Arabic/gelatin composite microcapsules and their cosmetic applications in encapsulating tea tree essential oil

Microencapsulation has been widely used to protect essential oils, facilitating their application in cosmetics. In this study, gelatin, gum arabic and n-butyl cyanoacrylate were used as wall materials, and composite microcapsules of tea tree essential oil (TTO) were prepared using a combination of composite coagulation and in situ polymerization methods. When the ratio of gelatin to gum arabic is 1 : 1, the ratio of TTO to n-butyl cyanoacrylate is 4 : 1, the curing time is 10 h, and the encapsulation efficiency (EE) under these conditions is 73.61%. Morphological observation showed that the composite capsule was a micron-sized spherical particle with an average particle size of 10.51 μm, and Fourier transform infrared spectroscopy (FT-IR) confirmed a complex coagulation reaction between gelatin and gum arabic, and the disappearance of the n-butyl cyanoacrylate peak indicated that the film was formed in a condensation layer. The thermogravimetric analysis (TGA) results showed that the composite capsule greatly improved the thermal stability of TTO. Rheological testing showed that the viscosity and viscoelasticity of the surface composite capsules have been improved. In addition, the composite capsule showed good stability in the osmotic environment and has good sustained-release performance and antioxidant capacity in the average human skin environment.

Process optimization and characterization of hydrolysate from underutilized brown macroalgae (Padina tetrastromatica) after fucoidan extraction through subcritical water hydrolysis

The growing demand for macroalgal biomass as a source of proteins, peptides, and amino acids is garnering attention for their biological and functional properties. This study depicts the use of emerging green techniques, i.e. subcritical water, to hydrolyze protein from Padina tetrastromatica. The biomass was treated with subcritical water at varying temperatures between 100 and 220 °C for 10-40 min at a biomass to water proportion of 1:50 (w/v) and pressure of 4.0 MPa. The optimum conditions for recovering the maximum protein (127.2 ± 1.1 mg g-1), free amino acids (58.4 ± 1.0 mg g-1), highest degree of hydrolysis (58.8 ± 1.2 %) and low molecular weight peptides (<650 Da) were found to be 220 °C for 10 min. The amino acid profiling of the hydrolysate revealed that it contains 45 % essential amino acids, with the highest concentration of methionine (0.18 %), isoleucine (0.12 %) and leucine (0.10 %). It was found that the hydrolysate contains phenolics (23.9 ± 1.4 mg GAE g-1) and flavonoids (1.23 ± 0.1 mg QE g-1), which are largely responsible for antioxidant activity. The hydrolysate effectively inhibits acetylcholinesterase and α-amylase in vitro, with IC50 values of 17.9 ± 0.1 mg mL-1 and 16.0 ± 0.5 %, respectively, which can help prevent Alzheimer's disease and diabetes mellitus. Consequently, this study reveals that utilizing eco-friendly subcritical water hydrolysis method, 79 % of the protein was recovered from P. tetrastromatica, which might be an effective source of bioactive peptides in various nutraceutical, pharmaceutical and cosmeceutical applications.

Effects of chitosan molecular weight and mass ratio with natural blue phycocyanin on physiochemical and structural stability of protein

Phycocyanin (PC), an algae-extracted colorant, has extensive applications for its water-solubility and fresh blue shade. When PC is added to acidified media, dispersions are prone to aggregate and decolorize into cloudy systems. For palliating this matter, chitosan with high, medium, and low molecular weights (HMC, MMC, and LMC) were adopted in PC dispersions, and their protective effects were compared based on physiochemical stabilities. The optimal mass ratio between chitosan and PC was identified as 1:5 based on preliminary evaluations and was supported by the higher ζ-potential (31.0-32.1 mV), lower turbidity (39.6-43.6 NTU), and polyacrylamide gel electrophoresis results. Through interfacial and antioxidant capacity analyses, LMC was found to display a higher affinity to PC, which was also confirmed by SEM images and the maximum increase in transition temperature of their complex (155.70 °C) in DSC measurements. The mechanism of electrostatic interaction reinforced by hydrophobic effects and hydrogen bonding was elucidated by FT-IR and Raman spectroscopy. Further comprehensive stability evaluations revealed that, without light exposure, LMC kept PC from internal secondary structure to external blueness luster to the maximum extent. While with light exposure, LMC was not so flexible as HMC, to protect chromophores from attack of free radicals.

Aggregation studies of alpha-lactalbumin induced by edible azo dyes with different sulfonyl group numbers: A comparative study

As an opaque and complex colloidal mixture, milk is usually present as a positively charged colloid under acidic conditions. Adding negatively charged colloids can lead to protein aggregation in milk. Alpha-lactalbumin (α-La) is an essential component of whey protein and has good physicochemical properties for functional food development. We combined spectroscopy, computer simulations, and other techniques to comparative analyze the mechanisms and characteristics of isolated α-La aggregation induced by CI Acid Red 27 (C27)/CI Acid Red 14 (FB) containing different sulfonyl groups in vitro. The results showed that C27/FB (5.25 × 10-5 mol·L-1 to 3.15 × 10-4 mol·L-1) induced the formation of fibril-like aggregates under acidic conditions (pH 2.0 and 4.0) mainly benefit from hydrophobic and electrostatic forces. Weakening and redshift of α-La's characteristics negative peak were observed (208 nm to 218 nm) on circular dichroism. β-Crosslinks self-assembly and reorganization of disulfide bonds occurred during protein fibrillation. Moreover, the different redshift intensity of Congo red binding to amyloid fibrils was observed to be induced by C27 (>551 nm) and FB (>536 nm), and the direct observation by TEM demonstrated the ability to induce protein fibrillation is C27 > FB. Edible azo dyes with more sulfonyl groups would possess a stronger ability to induce protein fibrillation.

Ultrasonic and homogenization: An overview of the preparation of an edible protein-polysaccharide complex emulsion

Emulsion systems are extensively utilized in the food industry, including dairy products, such as ice cream and salad dressing, as well as meat products, beverages, sauces, and mayonnaise. Meanwhile, diverse advanced technologies have been developed for emulsion preparation. Compared with other techniques, high-intensity ultrasound (HIUS) and high-pressure homogenization (HPH) are two emerging emulsification methods that are cost-effective, green, and environmentally friendly and have gained significant attention. HIUS-induced acoustic cavitation helps in efficiently disrupting the oil droplets, which effectively produces a stable emulsion. HPH-induced shear stress, turbulence, and cavitation lead to droplet disruption, altering protein structure and functional aspects of food. The key distinctions among emulsification devices are covered in this review, as are the mechanisms of the HIUS and HPH emulsification processes. Furthermore, the preparation of emulsions including natural polymers (e.g., proteins-polysaccharides, and their complexes), has also been discussed in this review. Moreover, the review put forward to the future HIUS and HPH emulsification trends and challenges. HIUS and HPH can prepare much emulsifier-stable food emulsions, (e.g., proteins, polysaccharides, and protein-polysaccharide complexes). Appropriate HIUS and HPH treatment can improve emulsions' rheological and emulsifying properties and reduce the emulsions droplets' size. HIUS and HPH are suitable methods for developing protein-polysaccharide forming stable emulsions. Despite the numerous studies conducted on ultrasonic and homogenization-induced emulsifying properties available in recent literature, this review specifically focuses on summarizing the significant progress made in utilizing biopolymer-based protein-polysaccharide complex particles, which can provide valuable insights for designing new, sustainable, clean-label, and improved eco-friendly colloidal systems for food emulsion. PRACTICAL APPLICATION: Utilizing complex particle-stabilized emulsions is a promising approach towards developing safer, healthier, and more sustainable food products that meet legal requirements and industrial standards. Moreover, the is an increasing need of concentrated emulsions stabilized by biopolymer complex particles, which have been increasingly recognized for their potential health benefits in protecting against lifestyle-related diseases by the scientific community, industries, and consumers.

Preparation and Characterization of GX-50 and Vitamin C Co-encapsulated Microcapsules by a Water-in-Oil-in-Water (W1/O/W2) Double Emulsion-Complex Coacervation Method

Co-encapsulated xanthoxylin (GX-50) and vitamin C (Vc) microcapsules (GX-50-Vc-M) were prepared by the combination of a water-in-oil-in-water (W1/O/W2) double emulsion with complex coacervation. The W1/O/W2 double emulsion was prepared by two-step emulsification, and it has a uniform particle size of 8.388 μm and high encapsulation efficiencies of GX-50 (85.95%) and Vc (67.35%) under optimized process conditions. Complex coacervation occurs at pHs 4.0-4.7, which has the highest encapsulation efficiency of GX-50 and Vc at pH 4.5. The complex coacervate with tannic acid solidifying (namely, wet microcapsules) has better mechanical properties and also enhances the ability of co-encapsulation of active ingredients. The resulting microcapsules by freeze-drying of wet microcapsules were characterized by UV-vis absorbance spectroscopy (UV-vis), Fourier infrared spectroscopy (FI-IR), confocal laser scanning microscopy (CLSM), scanning electron microscopy (SEM), X-ray diffraction (XRD), 2,2-diphenyl-1-picrylhydrazyl (DPPH·) radical scavenging, and in vitro permeation measurements. Under optimal conditions, the encapsulation efficiency and drug loading of GX-50-Vc-M for GX-50 and Vc are, respectively, 78.38 ± 0.51 and 59.34 ± 0.56%, and 35.6 ± 0.68 and 29.8 ± 0.92%. A slight shift in the FTIR peak between single GX-50 or Vc and GX-50-Vc-M confirmed the successful co-encapsulation of GX-50 and Vc in microcapsules. GX-50-Vc-M has bridged irregular spherical aggregates, while GX-50 and Vc are, respectively, encapsulated in hydrophobic and hydrophilic cavities of microcapsules in an amorphous dissolved state. GX-50-Vc-M has the highest DPPH· radical scavenging rate of 62.51%, and the scavenging process of GX-50-Vc-M on DPPH· radicals is more in line with the pseudo-second-order kinetic equation model. Moreover, the in vitro permeation of GX-50 and Vc in GX-50-Vc-M can reach maximum values of 40 and 60%, respectively. This concludes that GX-50-Vc-M is a promising delivery system for the penetration of the antioxidant into the deeper layers of the skin for the antioxidant effect.

Encapsulating vitamins C and E using food-grade soy protein isolate and pectin particles as carrier: Insights on the vitamin additive antioxidant effects

Functional factors show additive effects in the same nutraceutical food. In this study, a core-shell structure based on soy protein isolate (SPI) and pectin was constructed as a delivery system for vitamins C and E under neutral (pH 7.0) and acidic environment (pH 4.0). The SPI-vitamin-pectin complex formed at pH 4.0 showed larger particle size, higher turbidity, lower fluorescence intensity, and higher vitamin E encapsulation efficiency than those formed at pH 7.0. Also, the addition of vitamin C significantly enhanced the vitamin E encapsulation efficiency in the particles. Furthermore, the antioxidant properties of DPPH, ABTS, and hydroxyl radicals were increased by the addition of vitamin C, maximum values of 77%, 82%, and 65%, suggesting that vitamins C and E have additive antioxidant effects. These findings proposed a simple, structured protein-polysaccharide-based food-grade delivery system, which could serve as the basis for the design of products having multiple functional factors.

Enhancement of gum Arabic/casein microencapsulation on the survival of Lactiplantibacillus plantarum in the stimulated gastrointestinal conditions

Probiotic products that contain lactobacilli have long histories of safe use as Lactobacillus strains have many physiological functions in the gastrointestinal tract (GIT). However, the viability of probiotics can be affected by food processing and the adverse environment. This study investigated the O/W (Oil-in-water emulsions) emulsions formed by coagulation of casein/GA (Gum Arabic) complexes for Lactiplantibacillus plantarum microencapsulation, and the stability of the strains during gastrointestinal environment were also determined. The results showed that the particle size of the emulsion decreased from 9.72 μm to 5.48 μm when the GA concentration increased from 0 to 2 (w/v), and the emulsion particles were found to be more uniform as observed by CLSM (Confocal Laser Scanning Microscope). The surface of this microencapsulated casein/GA composite forms smooth, dense agglomerates and has high viscoelasticity, which effectively improved casein's emulsifying activity (8.66 ± 0.17 m2/g). After the casein/GA complexes microencapsulation, a higher viable count was detected after gastrointestinal digestion in vitro, and the activity of L. plantarum is more stable (about 7.51 log CFU/mL) during 35 days of storage at 4 °C. The results of study will help to design lactic acid bacteria encapsulation systems based on the GIT environment for the oral delivery strategy.

Effect of pH on the thermal gel properties of whey protein isolate-high acyl gellan gum

BACKGROUND

Protein-polysaccharide gels have significant and unique properties in food formulations. However, they are susceptible to environmental influences like heat and pH. The present work investigated the effects of acid and alkali treatments on the gel properties and microstructural changes of whey protein isolate (WPI) high acyl gellan gum (HG).

RESULTS

The results showed that the pH had a strong effect on the gel hardness, water-holding capacity (WHC), free sulfhydryl groups (-SH), and other properties of the composite gel. The hardness reached a maximum level of 282.50 g and the best WHC was 98.33% at pH 7, indicating that a suitable pH could promote this cross-linking between the WPI and HG molecules. The rheological analysis demonstrated that the pH affected the gel formation time. Meanwhile, the gel formation time reached a maximum at pH 7, and the gel's storage modulus G' value was the largest in the final state. Fourier transform infrared spectroscopy (FTIR) results showed that pH affected the interaction between WPI and HG. Scanning electron microscopy (SEM) analysis also indicated that the composite gel formed a three-dimensional network structure at pH 7-9.

CONCLUSION

These results could broaden the application of protein-polysaccharide gels in food and delivery systems. © 2023 Society of Chemical Industry.

The properties and formation mechanism of ovalbumin-fucoidan complex

The polymeric materials formed by proteins and polysaccharides through molecular interactions have attracted public attention. In this study, a novel binary complex consisting of ovalbumin (OVA) and fucoidan (FUC) was obtained by electrostatic self-assembly. The self-assembly properties and the formation mechanism of the OVA-FUC binary complex were investigated by changing the charging degree and density of complex through altering pH value and polysaccharides proportion. Structural changes during the OVA-FUC electrostatic self-assembly process were investigated by a phase diagram, ζ-potential, and particle size. The optimal conditions for preparing soluble OVA-FUC binary complex were determined by the protein retention rate and insoluble solids content. Results showed that the soluble OVA-FUC binary complex could be obtained at the pH of 3.5 to 5, and the insoluble OVA-FUC binary complex was generated at the pH of 2.5 to 3.5. The OVA-FUC binary complex (19 ± 0.29 mN/m) possessed a medium ability to reduce interfacial tension of the water-oil interface compared with OVA (15 ± 1.13 mN/m) and FUC (24 ± 0.3 mN/m), indicating that OVA-FUC binary complex has good amphiphilicity and can be applied as a potential pH-controlled emulsifier in function food systems for delivering bioactive substances.

Food emulsifier based on the interaction of casein and butyrylated dextrin for improving stability and emulsifying properties

Green hydrophobically modified butyrylated dextrin (BD) was used to modulate casein (CN). The CN/BD complex nanoparticles were formed at different CN-to-BD mass ratios based on a pH-driven technology. The interaction force, stability, and emulsifying properties of complex nanoparticles were investigated. The nanoparticles had a negative charge and a small particle size (160.03, 152.6, 155.9, 206.13, and 231.67 nm) as well as excellent thermal stability and environmental stability (pH 4.5, 5.5, 6.6, 7.5, 8.5, and 9.5; ionic strength, 50, 100, 200, and 500 mM). Transmission electron microscopy demonstrated the successful preparation of complex nanoparticles and their spherical shape. Fourier transform infrared spectroscopy, fluorescence spectroscopy, and dissociation analysis results showed that the main driving forces of formed CN/BD nanoparticles were hydrogen bonding and hydrophobic interaction. Furthermore, the CN/BD nanoparticles (CN/BD mass ratio, 1:1; weight/weight) exhibited the lowest creaming index, and optical microscopy showed that it has the most evenly dispersed droplets after 7 d of storage, which indicates that the CN/BD nanoparticles had excellent emulsifying properties. Butyrylated dextrin forms complex nanoparticles with CN through hydrogen bonding and hydrophobic interaction to endow CN with superior properties. The results showed that it is possible to use pH-driven technology to form protein-polysaccharide complex nanoparticles, which provides some information on the development of novel food emulsifiers based on protein-polysaccharide nanoparticles. The study provided significant information on the improvement of CN properties and the development of emulsions based on CN.

Fabrication and characterization of gelatin-EGCG-pectin ternary complex: formation mechanism, emulsion stability, and structure

BACKGROUND

Protein-polyphenol-polysaccharide ternary complex particles have better emulsion interfacial stability compared to protein-polysaccharide binary complexes. However, knowledge is scarce when it comes to the fabrication of protein-polyphenol-polysaccharide ternary complexes as interfacial stabilizers and the interactions between the three substances. In the present work, ternary complexes were prepared using gelatin, high methoxyl pectin, and epigallocatechin gallate (EGCG) as raw materials. The effect of different influencing factors on the formation process of ternary complexes was investigated by varying different parameters. physicochemical stability, emulsifying properties, and structural characteristics were analyzed.

RESULTS

The ternary complex had a smaller particle size (275 nm) and polydispersity index (0.112) when the mass concentration ratio of gelatin to high methoxyl pectin was 9:1, addition of EGCG was 0.05%, pH value was 3.0, and ionic strength was 10 mmol L^-1 . Meanwhile, the complex had the highest emulsifying stability index (691.75 min) and emulsifying activity index (22.96 m²  g^-1 ). Scanning electron microscopical observation demonstrated that the addition of EGCG promoted the dispersion of ternary complex more uniformly, and effectively reduced the agglomeration phenomenon. The discrepancy in fluorescence intensity suggested that interactions between EGCG and gelatin occurred, which altered the protein spatial conformation of gelatin. Fourier transform infrared spectroscopic analysis elucidated that hydrogen bond interaction was the primary non-covalent interaction between EGCG and gelatin-high methoxyl pectin binary complex.

CONCLUSION

The aforementioned results purposed to provide some theoretical reference and basis for the rational design of stable protein-polyphenol-polysaccharide ternary complexes. © 2022 Society of Chemical Industry.

Effect of Mucilage Extracted from Corchorus olitorius Leaves on Bovine Serum Albumin (BSA)-Stabilized Oil-in-Water Emulsions

The present study examined the effect of mucilage extracted from Corchorus olitorius L. leaves on the emulsifying stability of bovine serum albumin (BSA)-stabilized oil-in-water (O/W) emulsions during the storage for seven days. O/W emulsions were prepared with a 90% aqueous phase containing C. olitorius mucilage (0-1.00% w/v) together with 0.5% (w/v) BSA and 10% oil phase. Emulsion properties were analyzed by measuring droplet size, zeta potential, spectroturbidity, backscattering profiles (%BS), and visual observations. The mean droplet size of emulsions prepared with 0.75 and 1.00% mucilage did not show significant changes during storage. The zeta potential of all the emulsions exhibited a negative charge of approximately -40 mV, but electrical repulsion was not the dominant stabilization mechanism in the emulsion. C. olitorius mucilage was able to increase the viscosity of the aqueous phase of the O/W emulsion system, which prevented droplet flocculation and enhanced the emulsion stability against phase separation at higher concentrations. The most stable emulsions during the storage period were those with 1.00% C. olitorius mucilage. In conclusion, C. olitorius mucilage has good potential for the preparation of stable O/W emulsions and can be used as a plant-based natural emulsifying and thickening agent in the food industry.

Rheology and Gelation of Hyaluronic Acid/Chitosan Coacervates

Hyaluronic acid (HA) and chitosan (CHI) are biopolyelectrolytes which are interesting for both the medical and polymer physics communities due to their biocompatibility and semi-flexibility, respectively. In this work, we demonstrate by rheology experiments that the linear viscoelasticity of HA/CHI coacervates depends strongly on the molecular weight of the polymers. Moduli for coacervates were found significantly higher than those of individual HA and CHI physical gels. A remarkable 1.5-fold increase in moduli was noted when catechol-conjugated HA and CHI were used instead. This was attributed to the conversion of coacervates to chemical gels by oxidation of 3,4-dihydroxyphenylalanine (DOPA) groups in HA and CHI to di-DOPA crosslinks. These rheological results put HA/CHI coacervates in the category of strong candidates as injectable tissue scaffolds or medical adhesives.

Impact of the droplet size of canola oil-in-water emulsions on the rheology and sensory acceptability of reduced-milk fat stirred yogurt

A coarse canola oil-in-water (O/W) emulsion (dispersed mass fraction 0.1) was prepared by adding oil to whey protein hydrolysate (WPH)-citric pectin (CP) soluble complex (1% total biopolymer weight; WPH to CP mass ratio 6:1; pH 4.25) aqueous phase using a high shear homogenizer (4000 rpm, 2 min). The coarse O/W emulsion was further homogenized to obtain emulsions (Ex) with different mean droplet sizes (4000, 3000, 120 and 60 nm). A full-fat yogurt (YC; 26 ± 0.3 g milk fat L-1) was prepared from reconstituted whole milk powder (WMP, 3% milk fat) and skim milk powder (SMP, 0.01% milk fat). Reduced-milk fat yogurt (YEx 13 ± 0.3 g milk fat L-1) variations were prepared from WMP + SMP + Ex, where Ex substituted 50% of the milk-fat contained in YC. The viscosity and viscoelastic moduli were lower for YEx than for YC; the effect was more pronounced for E60 and E120. Aroma was non-significantly different between YC and YEx. A multivariate analysis showed that YEx overall acceptability was linked to taste and after taste attributes and to the viscosity perceived in mouth. The loss modulus showed anti-correlation directionality with the overall acceptance. The smaller mean droplet sized YEx exhibited the highest overall acceptability.

Supplementary Information

The online version contains supplementary material available at 10.1007/s13197-022-05573-3.

Encapsulation and sustained release of curcumin by hawthorn pectin and Tenebrio Molitor protein composite hydrogel

In this study, the effects of pH value, mixing ratio and the Ca²⁺ concentration on the complex gelation of hawthorn pectin (HP) and Tenebrio Molitor protein (TMP) were investigated. The turbidity results showed that the composite gel had the maximum polymer concentration when the mixing ratio was 2:1 and the pH value was 3.35. The rheological measurement results showed that TMP/HP (15 mmol/L) hydrogel (THIH) had the highest storage modulus and loss modulus, indicating that the properties of the hydrogel at this Ca²⁺ concentration had been significantly improved. The results of scanning electron microscope and pore size also proved that the network structure prepared under this condition was compact and uniform, the pore size was small, which was beneficial to the entrapment of active components. Subsequently, in order to explore the storage stability and antioxidant activity of THIH-loaded curcumin in simulated gastrointestinal environment, in vitro simulated digestion experiment was carried out and satisfactory results were obtained. To sum up, THIH was a promising delivery system with broad application prospects, which was expected to provide a novel idea for the entrapment and delivery of active components.

Polysaccharides improved the viscoelasticity, microstructure, and physical stability of ovalbumin-ferulic acid complex stabilized emulsion

This study explored the mechanism underlying the interactions between polysaccharides and ovalbumin-ferulic acid (OVA-FA) and the effect of polysaccharides on OVA-FA-stabilized emulsions. Fourier transform infrared spectroscopy (FTIR) and X-ray diffraction (XRD) were used to study the polysaccharide OVA-FA interactions mechanism and to resolve the changes in the protein secondary structure and crystal structure. OVA-FA-polysaccharide-stabilized emulsions were studied using confocal laser scanning microscopy (CLSM), and their rheological properties and stability were determined. The results showed that the non-covalent interactions between polysaccharides and OVA-FA led to an increase in the β-sheet content of OVA and a decrease in the α-helix and random coil contents. The stability of the OVA-FA-polysaccharide-stabilized emulsions was better compared with that of the OVA-FA-stabilized emulsions. By comparing the different OVA-FA-polysaccharide-stabilized emulsions, we observed that OVA-FA-agar did not stabilize the emulsion well, while the OVA-FA-SA- and OVA-FA-KC-stabilized emulsions had good elasticity, and the microstructure and storage stability of the OVA-FA-KC-stabilized emulsion were better. Our findings provide a new perspective for the application of OVA-FA-KC in complex food emulsions.

Complexation behavior of carboxymethyl short-chain amylose and quaternized chitosan

The complexation of carboxymethyl short-chain amylose (CSA) and hydroxypropyl trimethyl ammonium chloride chitosan (HACC) and the stability of CSA/HACC nanocomplex were investigated. Resonance light scattering (RLS), turbidity, nanoparticle size and zeta potential analyses revealed that the complex coacervation occurred between CSA and HACC. The mass ratio and pH markedly influenced the complexation behavior; CSA with a higher degree of substitution (DS0.2) altered the complexation at a lower mass ratio and pH, increasing the turbidity and RLS intensity. The results of particle size and zeta potential analyses indicated that CSA/HACC complexes possessed the good pH and ionic strength stability. In addition to electrostatic interactions, hydrogen bonding and hydrophobic effects were also determined to be involved in the complexation process using thermal titration calorimetry (ITC). Additionally, the process was spontaneous, and CSA with a higher DS showed stronger complexation ability. These results may enable the understanding of polysaccharide complex behaviors.

Precisely Localized Bone Regeneration Mediated by Marine-Derived Microdroplets with Superior BMP-2 Binding Affinity

Prompt and robust bone regeneration has been clinically achieved using supraphysiological doses of bone morphogenetic protein-2 (BMP-2) to overcome the short half-life and rapid clearance. However, uncontrolled burst release of exogenous BMP-2 causes severe complications such as heterotopic ossification and soft tissue inflammation. Therefore, numerous researches have focused on developing a new BMP-2 delivery system for a sustained release profile by immobilizing BMP-2 in various polymeric vehicles. Herein, to avoid denaturation of BMP-2 and enhance therapeutic action via localized delivery, a complex coacervate consisting of fucoidan, a marine-derived glycosaminoglycan, and poly-l-lysine (PLL) is fabricated. Superior BMP-2 binding ability and electrostatic interaction-driven engulfment enable facile and highly efficient microencapsulation of BMP-2. The microencapsulation ability of the coacervate significantly improves BMP-2 bioactivity and provides protection against antagonist and proteolysis, while allowing prolonged release. Moreover, BMP-2 containing coacervate is coated on conventional collagen sponges. The bioactivity and localized bone regenerating ability are confirmed through in vitro (human-derived stem cells), and in vivo (calvarial bone defect model) evaluations.

Protein-polysaccharide interactions for the fabrication of bioactive-loaded nanocarriers: Chemical conjugates and physical complexes

As unique biopolymeric architectures, covalently and electrostatically protein-polysaccharide (PRO-POL) systems can be utilized for bioactive delivery by virtue of their featured structures and unique physicochemical attributes. PRO-POL systems (i. e, microscopic /nano-dimensional multipolymer particles, molecularly conjugated vehicles, hydrogels/nanogels/oleogels/emulgels, biofunctional films, multilayer emulsion-based delivery systems, particles for Pickering emulsions, and multilayer coated liposomal nanocarriers) possess a number of outstanding attributes, like biocompatibility, biodegradability, and bioavailability with low toxicity that qualify them as powerful agents for the delivery of different bioactive ingredients. To take benefits from these systems, an in-depth understanding of the chemical conjugates and physical complexes of the PRO-POL systems is crucial. In this review, we offer a comprehensive study concerning the unique properties of covalently/electrostatically PRO-POL systems and introduce emerging platforms to fabricate relevant nanocarriers for encapsulation of bioactive components along with a subsequent sustained/controlled release.

Thermodynamic compatibility of gelatin and tragacanth gum in aqueous systems

The influence of total concentration, biopolymer mixing ratio, and ionic strength on the association of tragacanth gum (TG) and gelatin (G) in the aqueous system during acidification was investigated. The onset of soluble complex formation appeared at pH_c, where both biopolymers carried a negative charge. Insoluble complexes were formed at pH_φ1 by a further pH decrease, owing to increased interactions between the polymers. The complexes formed at pH_φ1 still had partly high negative surface charge. Complex coacervation was observed at pH_opt due to the growing size and number of insoluble complexes. The ζ value of the G- TG significantly decreased at pH_opt, which was subjected to phase separation. Turbidity decreased at pH_φ2 as a result of complex decomposition. The maximum efficiency of complex formation was at the salt-free samples. NaCl reduced critical pHs and complex formation efficiency by screening the ionized groups on the biopolymers.

Maillard-Type Protein-Polysaccharide Conjugates and Electrostatic Protein-Polysaccharide Complexes as Delivery Vehicles for Food Bioactive Ingredients: Formation, Types, and Applications

Due to their combination of featured properties, protein and polysaccharide-based carriers show promising potential in food bioactive ingredient encapsulation, protection, and delivery. The formation of protein–polysaccharide complexes and conjugates involves non-covalent interactions and covalent interaction, respectively. The common types of protein–polysaccharide complex/conjugate-based bioactive ingredient delivery systems include emulsion (conventional emulsion, nanoemulsion, multiple emulsion, multilayered emulsion, and Pickering emulsion), microcapsule, hydrogel, and nanoparticle-based delivery systems. This review highlights the applications of protein–polysaccharide-based delivery vehicles in common bioactive ingredients including polyphenols, food proteins, bioactive peptides, carotenoids, vitamins, and minerals. The loaded food bioactive ingredients exhibited enhanced physicochemical stability, bioaccessibility, and sustained release in simulated gastrointestinal digestion. However, limited research has been conducted in determining the in vivo oral bioavailability of encapsulated bioactive compounds. An in vitro simulated gastrointestinal digestion model incorporating gut microbiota and a mucus layer is suggested for future studies.

Trends in "green" and novel methods of pectin modification - A review

Modification of hydrocolloids to alter their functional properties using chemical methods is well documented in the literature. There has been a recent trend of adopting eco-friendly and "green" methods for modification. Pectin, being a very important hydrocolloid finds its use in various food applications due to its gelling, emulsifying, and stabilizing properties. The adoption of various "green" methods can alter the properties of pectin and make it more suitable for incorporation in food products. The novel approaches such as microwave and pulsed electric field can also be utilized for solvent-free modification, making it desirable from the perspective of sustainability, as it reduces the consumption of organic chemicals. Pectic oligosaccharides (POSs) produced via novel approaches are being explored for their biological properties and incorporation in various functional foods. The review can help to set the perspective of potential scale-up and adoption by the food industry for modification of pectin.

Rheological properties for determining the interaction of soluble cress seed mucilage and β-lactoglobulin nanocomplexes under sucrose and lactose treatments

Protein-polysaccharide complexes are commonly applied in different food products. Their interaction and their functional properties that arise as a consequence of interactions are remarkably influenced by the presence of co-solutes in the system. In this study, general rheological properties and the aggregation behavior of cress seed mucilage (CSM)-β-lactoglobulin (Blg) complexes were studied in the presence of sucrose (5-20% w/v) and lactose (5-20% w/v). The highest values of apparent viscosity and stability (zeta potential) in CSM-Blg complexes were measured when the medium contained 5% w/v lactose (10.00 Pa.s at 0.1 s^-1, -25 ± 0.8 mV) and 20% w/v sucrose (12.89 Pa.s at 0.1 s^-1, -35 ± 0.2 mV). The results of oscillatory experiments indicated that the gel-like feature of the complexes improved, parallel to a decrease in frequency, which highlighted the shear-induced gelation phenomenon. The thermal analysis test demonstrated that the thermal stability of Blg (70.5^◦C), with its complexation to CSM, improved through denaturation. Also, the association of CSM-Blg (82^◦C) nanocomplexes with lactose (96^◦C) can enhance the thermal stability more effectively. Considering the widespread use of protein-polysaccharide complexes in diverse sugar-containing food formulations, the results of this study can contribute to the creation of new compounds with special techno-functional features.

Sodium dodecyl sulfate modulates the structure and rheological properties of Pluronic F108-poly(acrylic acid) coacervates)

Micelles formed within coacervate phases can impart functional properties, but it is unclear if this micellization provides mechanical reinforcement of the coacervate whereby the micelles act as high functionality crosslinkers. Here, we examine how sodium dodecyl sulfate (SDS) influences the structure and properties of Pluronic F108-polyacrylic acid (PAA) coacervates as SDS is known to decrease the aggregation number of Pluronic micelles. Increasing the SDS concentration leads to larger water content in the coacervate and an increase in the relative concentration of PAA to the other solids. Rheological characterization with small angle oscillatory shear (SAOS) demonstrates that these coacervates are viscoelastic liquids with the moduli decreasing with the addition of the SDS. The loss factor (tan δ) initially increases linearly with the addition of SDS, but a step function increase in the loss factor occurs near the reported CMC of SDS. However, this change in rheological properties does not appear to be correlated with any large scale structural differences in the coacervate as determined by small angle X-ray scattering (SAXS) with no signature of Pluronic micelles in the coacervate when SDS concentration is >4 mM during formation of the coacervate, which is less than that observed (6 mM SDS) in initial Pluronic F108 solution despite the higher polymer concentration in the coacervate. These results suggest that the mechanical properties of polyelectrolyte-non-ionic surfactant coacervates are driven by the efficicacy of binding between the complexing species driving the coacervate, which can be disrupted by competitive binding of the SDS to the Pluronic.

Sodium alginate/soybean protein-epigallocatechin-3-gallate conjugate hydrogel beads: evaluation of structural, physical, and functional properties

Sodium alginate (SA) hydrogel beads have been extensively studied as delivery systems for bioactive compounds. Key challenges include overcoming the highly porous and poor emulsifying properties of SA hydrogels. Herein, soy protein isolate (SPI) was modified by covalent and noncovalent conjugation with epigallocatechin-3-gallate (EGCG), followed by complexation with SA to change the SA structure and fabricate hydrogel beads with low porosities. Microencapsulation beads were fabricated from SA-, SA/SPI-, and SA/SPI-modified EGCG complexes with a corn oil/quercetin mixture core. After the covalent and noncovalent SPI-modified EGCG complexes were combined with SA, the OH stretching vibration shifted, indicating that hydrogen bonds formed between the protein and SA, and the crystal structure of SA was destroyed. To achieve crosslinking, the beads were injected into a CaCl₂ solution, whereby Ca²⁺ ions replaced the Na⁺ ions in SA. Meanwhile, the addition of covalent and noncovalent SPI-modified EGCG complexes promoted the binding capacity of Ca²⁺ and SA. All hydrogel beads possessed open-cell microstructures with interconnecting pores. The SA/SPI-modified EGCG hydrogel beads exhibited smoother surfaces, thicker shells, and lower porosity than the SA hydrogel beads. Moreover, they exhibited significantly higher antioxidant activities. During digestion, all types of hydrogel bead maintained their structure, and only a small part of the encapsulated oil and quercetin was digested in the upper part of the gastrointestinal tract. In short, the formation mechanism of hydrogel beads was clarified, and hydrogel beads with low porosity and high antioxidation activities were successfully fabricated.

Preparation and characterization of octenyl succinic anhydride modified waxy maize starch hydrolyzate/chitosan complexes with enhanced interfacial properties

The preparation and characterization of colloidal complexes based on octenyl succinic anhydride starch hydrolyzate (OSAS) and chitosan (CS) were conducted. Results showed that OSA-S/CS ratio (r) and pH significantly affected complex turbidities and yields. The highest turbidity and yield were obtained at r = 6:1 when pH was fixed, and at pH 6.5 when r was fixed. All complexes remained liquid-like except that formed at pH 6.5, which exhibited a gel structure due to the strongest complexation. OSA-S/CS complexes had intertwined core-shell microstructure and exhibited electrostatic interactions between COO^- and NH₃⁺ groups of OSA-S and CS, respectively. The complexes prepared at r = 6:1 and pH 6.0 exhibited the most suitable wettability (θ_ow = 91.97°) and interfacial adsorption dynamics. The compact lamellar network and intact cores of these complexes were also shown. This work provides profound and comprehensive information about the formation and physicochemical properties of OSA-S/CS complexes.