Surface modification of electrospun cellulose acetate nanofibers via RAFT polymerization for DNA adsorption

Magnetic quaternary ammonium polymer bearing porous agarose for selective extraction of Aristolochic acids in the plasma

Aristolochic acids (AAs) naturally occurring in the herbal genus Aristolochia are associated with a high risk of kidney failure, multiple tumors and cancers. However, approaches with high selectivity and rapidity for measuring AAs in biological samples are still inadequate. Inspired by the mechanism of AAs-induced nephrotoxicity, we designed a hybrid magnetic polymer-porous agarose (denoted as MNs@SiO2M@DNV-A), mimicking the effect of basic and aromatic residues of organic anion transporter 1 (OAT1) for efficient enriching aristolochic acid I (AA I) and aristolochic acid II (AA II) in the plasma. The monomers of vinylbenzyl trimethylammonium chloride (VBTAC), N-vinyl-2-pyrrolidinone (NVP) and divinylbenzene (DVB) were employed to construct the polymer layer, which provided a selective adsorption for AAs by multiple interactions. The porous agarose shell contributed to remove interfering proteins in the plasma samples. A magnetic solid-phase extraction (MSPE) based on the proposed composite enhanced the selectivity toward AA I and AA II in the plasma samples. In combination of HPLC analysis, the proposed method was proved to be applicable to fast and specific quantification of AAs in blood samples, which was characterized by a good linearity, high sensitivity, acceptable recovery, excellent repeatability and satisfactory reusability.

Fabrication of biodegradable cellulose acetate nanofibers containing Rose Bengal dye by electrospinning technique and their antiviral efficacy under visible light irradiation

Biodegradable cellulose acetate (CA) nanofibers containing Rose Bengal (RB) dye were fabricated by electrospinning technique. RB dye, an anionic photosensitizer, has been used in photodynamic therapy due to its excellent biocompatibility and ability to absorb light to generate reactive oxygen species (ROS), but has a decisive disadvantage of water solubility on infection prevention. Firstly, water-insoluble RB dye was synthesized through complexation with cationic ionic liquid (IL) for antiviral agents. The synthesized water-insoluble RB dyes were embedded into biodegradable CA nanofibers by electrospinning. The electrospun nanofibers passed both antiviral test for φx174 virus under visible light irradiation and biodegradability-test using enzymes. The fabricated RB nanofibers absorbed light and generated ROS to inactivate the virus. As a result, the log reduction (-Log10(N/N0)) of φx174 titer under visible light reached a detection limit of 5.00 within 30 min. Also, the fabricated nanofibers were degraded up to 34 wt % in 9 weeks by lipase and cellulase enzymes compared with non-biodegradable nanofibers.

Diagnosis of Neglected Tropical Zoonotic Disease, Leptospirosis in a Clinical Sample Using a Photothermal Immunosensor

Photothermal biosensing based on nanomaterials has gained increasing attention because of its universality and simplicity. Diagnostics of neglected tropical diseases (NTDs) in low-resource settings are challenging in terms of speed, accuracy, and cost-effectiveness. By exploiting the photothermal property of carbon nanotubes (CNTs), simple thermometric measurements can be used to generate quantitative biochemical readouts. Herein, a photothermal immunosensor for leptospirosis detection based on a CNT-labeled monoclonal antibody is established through the sensitive monitoring of the target biomarker LipL32 with a simple thermometer. Under optimum conditions, a linear range up to 106 pg/mL with a limit of detection (LOD) of 300 fg/mL was obtained. Overall, the proposed immunoassay exhibited good precision, selectivity, and acceptable stability. Clinical patient sample analysis with the photothermal sensor proved the differential diagnosis of leptospirosis along with other febrile illnesses. On the other hand, we have also characterized the photothermal sensor platform with surface morphological and spectral techniques to confirm the robust and successful fabrication of the immunosensor. The fabricated photothermal sensor could be used as a potential diagnostic tool for the early detection of NTDs in patients from resource-limited settings, as it does not require sample pretreatment, sophisticated equipment, or skilled labor. Moreover, the developed photothermal assay follows ASSURED criteria, very crucial for diagnosis in resource-limited settings.

Use of polypyrrole-polystyrene membranes for extracting DNA from plant tissues

We describe the preparation of a membrane composed of polypyrrole-polystyrene (PPy-PS) and its application in DNA extraction. We adopted the electrospinning technique to prepare polystyrene (PS) membranes, which we used as substrates for incorporating polypyrrole chains through an in situ chemical procedure. As a model system, we initially investigated the use of PPy-PS membranes for the extraction of salmon sperm DNA from aqueous solutions. These studies have shown that the PPy-PS membrane has a maximum adsorption capacity of 236.0 mg of DNA per gram of PPy after 30 min of exposure to a DNA solution (100 mg/L). We incorporated the PPy-PS membranes into centrifugation columns, which we used to carry out experiments for extracting and purification of DNA from curly lettuce leaves. The protocol was initially optimized by first examining the most appropriate concentration of the three components of the lysis buffer (Tris/HCl, NaCl, and EDTA-Na). We then investigated the most adequate volumes of the concentrated surfactant solution (SDS 20%) and that used in the protein and polysaccharide precipitation step (5 M potassium acetate, pH 6.3), factors that directly influence the quality and quantity of the fraction of DNA obtained. For curly lettuce leaves, both in their mature and young stages, the yield and purity of the DNA purified using the PPy-PS membrane were comparable to those obtained using a commercial kit. In both cases, the collected DNA samples presented excellent integrity and quality. These results are suggestive that these composite membranes are competitive with the commercial kits available for the extraction and purification of DNA from plants.

Biopolymer-Based Membrane Adsorber for Removing Contaminants from Aqueous Solution: Progress and Prospects

The demand for energy-efficient water treatment as well as the limitation in adsorption of existing membranes has motivated the pursuit of membranes that can break the selectivity-permeability trade-off and provide high selective adsorption for chemicals of interest. The membrane adsorbers have received a lot of attention for removing contaminants from aqueous solution due to combine both advantages of adsorption and membrane separation. Membrane adsorbers constructed by biopolymer with many functional groups are widely used in water purification, because the biopolymers are easily available from biomass materials in nature, degradable, and low-cost. This paper summarizes the characteristics and important development direction of these types of biomass-based membrane adsorption materials to adsorb organic/inorganic contaminants of water and analyzes the preparation methods of natural biomacromolecule cellulose, chitosan, sodium alginate, and protein to construct the membrane adsorption materials, as well as the application of pollutant removal from aqueous solutions. According to the current problems and shortcomings in the research of biopolymer-based membrane adsorbers, it is proposed to improve the understanding of the adsorption mechanism of biopolymer-based membrane adsorbers and accelerate the development of practical applications as the focus of future research.

Recent Advances in the Fabrication and Environmental Science Applications of Cellulose Nanofibril-Based Functional Materials

Cellulose is one of the important biomass materials in nature and has shown wide applications in various fields from materials science, biomedicine, tissue engineering, wearable devices, energy, and environmental science, as well as many others. Due to their one-dimensional nanostructure, high specific surface area, excellent biodegradability, low cost, and high sustainability, cellulose nanofibrils/nanofibers (CNFs) have been widely used for environmental science applications in the last years. In this review, we summarize the advance in the design, synthesis, and water purification applications of CNF-based functional nanomaterials. To achieve this aim, we firstly introduce the synthesis and functionalization of CNFs, which are further extended for the formation of CNF hybrid materials by combining with other functional nanoscale building blocks, such as polymers, biomolecules, nanoparticles, carbon nanotubes, and two-dimensional (2D) materials. Then, the fabrication methods of CNF-based 2D membranes/films, three-dimensional (3D) hydrogels, and 3D aerogels are presented. Regarding the environmental science applications, CNF-based nanomaterials for the removal of metal ions, anions, organic dyes, oils, and bio-contents are demonstrated and discussed in detail. Finally, the challenges and outlooks in this promising research field are discussed. It is expected that this topical review will guide and inspire the design and fabrication of CNF-based novel nanomaterials with high sustainability for practical applications.

Substitution of petroleum-based polymeric materials used in the electrospinning process with nanocellulose: A review and future outlook

The most fibrous reinforcing materials for engineered composites (e.g. carbon fiber, glass fiber) are solid fibers or loops, garments, and their preforms. In design and fabrication methods, the fiber orientation and design can therefore be regulated broadly. The continuous fibers from biobased materials such as plants are nevertheless growing interest. Nanocelluloses, which are projected to be cheaper than many other nanomaterials and potentially produce in great quantities, are of particular interest recently. They have an impressive strength to weight ratio and have so far demonstrated no care in their unmodified condition with respect to the climate, health and safety. The efficient and effective use of nanocellulose in continuous fibers is, however, difficult and a range of approaches have been studied where either directly or in combination with the polymers spin nanocellulose dispersions. In this study, a variety of approaches are reviewed and a perspective is provided to better understand the body of knowledge in this new and increasing area.

Modifying Cellulose Acetate Mixed-Matrix Membranes for Improved Oil-Water Separation: Comparison between Sodium and Organo-Montmorillonite as Particle Additives

In this study, cellulose acetate (CA) mixed-matrix membranes were fabricated through the wet-phase inversion method. Two types of montmorillonite (MMT) nanoclay were embedded separately: sodium montmorillonite (Na-MMT) and organo-montmorillonite (O-MMT). Na-MMT was converted to O-MMT through ion exchange reaction using cationic surfactant (dialkyldimethyl ammonium chloride, DDAC). Attenuated total reflectance-Fourier transform infrared (ATR-FTIR) and X-ray photoelectron spectroscopy (XPS) compared the chemical structure and composition of the membranes. Embedding either Na-MMT and O-MMT did not change the crystallinity of the CA membrane, indicating that the nanoclays were dispersed in the CA matrix. Furthermore, nanoclays improved the membrane hydrophilicity. Compared with CA_Na-MMT membrane, CA_O-MMT membrane had a higher separation efficiency and antifouling property. At the optimum concentration of O-MMT in the CA matrix, the pure water flux reaches up to 524.63 ± 48.96 L∙m^-2∙h^-1∙bar^-1 with over 95% rejection for different oil-in-water emulsion (diesel, hexane, dodecane, and food-oil). Furthermore, the modified membrane delivered an excellent antifouling property.

Highly Efficient Removal of Methylene Blue Dye from an Aqueous Solution Using Cellulose Acetate Nanofibrous Membranes Modified by Polydopamine

A new type of deacetylated cellulose acetate (DA)@polydopamine (PDA) composite nanofiber membrane was fabricated by electrospinning and surface modification. The membrane was applied as a highly efficient adsorbent for removing methylene blue (MB) from an aqueous solution. The morphology, surface chemistry, surface wettability, and effects of operating conditions on MB adsorption ability, as well as the equilibrium, kinetics, thermodynamics, and mechanism of adsorption, were systematically studied. The results demonstrated that a uniform PDA coating layer was successfully developed on the surface of DA nanofibers. The adsorption capacity of the DA@PDA nanofiber membrane reached up to 88.2 mg/g at a temperature of 25 °C and a pH of 6.5 after adsorption for 30 h, which is about 8.6 times higher than that of DA nanofibers. The experimental results showed that the adsorption behavior of DA@PDA composite nanofibers followed the Weber's intraparticle diffusion model, pseudo-second-order model, and Langmuir isothermal model. A thermodynamic analysis indicated that endothermic, spontaneous, and physisorption processes occurred. Based on the experimental results, the adsorption mechanism of DA@PDA composite nanofibers was also demonstrated.

Polystyrene@poly(ar-vinylbenzyl)trimethylammonium-co-acrylic acid core/shell pH-responsive nanoparticles for active targeting and imaging of cancer cell based on aggregation induced emission

Doubly charged pH-responsive core/shell hydrogel nanoparticles with green fluorescence were prepared and were shown to be viable bioprobes for active targeting tumor tissue and imaging of cancer cells. Via emulsionfree copolymerization hydrogel nanoparticles as VANPs were prepared, the core of which was polystyrene (Ps) and the shell was comprised of strongly positive electrolyte (ar-vinylbenzyl)trimethylammonium (VBTAC) with weak negative electrolyte acrylic acid (AA). Through conventional amidation, the shell was conjugated with cell-specific folic acid (FA), denoted as VANPs-FA. Then, negatively charged sulfonated 9,10-distyrylanthracene derivatives (SDSA) based on aggregation induced emission (AIE), was binding tightly to positively charged VBTAC of VANPs-FA shell. The prepared double charged fluorescent core/shell hydrogel nanoparticles abbreviated as VANPs-FS, showed excitation/emission wavelengths at ~420/528 nm. Dynamic light scattering (DLS) measurements were performed to determine the size and surficial zeta potential of VANPs-FS. Under proper ratio of VBTAC to AA, the VANPs-FS was stable (~ 64.63 nm, -20.2 mV) at high pH (> 7), started to aggregate (~ 683.0 nm, -3.2 mV) at pH around 6, and can redispers at low pH (< 5). The MTT analysis proved that VANPs-FS had good biocompatibility and low cytotoxicity. The targeting effectiveness of VANPs-FS was confirmed by confocal laser scanning microscopy (CLSM). Graphical abstract Detailed synthetic route of VANPs-FS (top) and schematic cancer tumor-target aggregation of pH-sensitive VANPs-FS with enhanced retention and rapid cancer cell imaging (bottom).

Extraction of plasmid DNA by use of a magnetic maghemite-polyaniline nanocomposite

We describe the use of a hybrid magnetic nanocomposite (HMNC) for the extraction and purification of plasmid DNA (pDNA) from Escherichia coli aqueous solutions. The HMNC, which was synthesized via emulsion polymerization, was characterized by transmission electron microscopy, scanning electron microscopy, UV-Vis spectroscopy, Fourier transform infrared spectroscopy, dynamic light scattering and magnetic measurements. The results confirmed the incorporation of polyaniline (Pani) in its conducting form onto a core formed by the magnetic iron oxide, with the hybrid particles presenting an average size of (95 ± 30) nm and a saturation magnetization of 30 emu/g. The yield, purity and quality of the pDNA purified by using the Pani HMNC were evaluated by UV-Vis spectroscopy, agarose gel electrophoresis, and Polymerase Chain Reaction (PCR), respectively. An average yield of ~6.9 μg was obtained in the DNA extraction process, with the collected material presenting a good purity (a ₳260/280 ratio in the 1.68-1.82 range) and an excellent quality, as confirmed by subsequent PCR assays. Hence, this HMNC appears as a promising material for use in pDNA purification protocols, and we suggest that this novel HMNC-based methodology can be of general interest and find widespread application in different biomedical procedures.

Recent Advances in Nanocellulose Composites with Polymers: A Guide for Choosing Partners and How to Incorporate Them

In recent years, the research on nanocellulose composites with polymers has made significant contributions to the development of functional and sustainable materials. This review outlines the chemistry of the interaction between the nanocellulose and the polymer matrix, along with the extent of the reinforcement in their nanocomposites. In order to fabricate well-defined nanocomposites, the type of nanomaterial and the selection of the polymer matrix are always crucial from the viewpoint of polymer⁻filler compatibility for the desired reinforcement and specific application. In this review, recent articles on polymer/nanocellulose composites were taken into account to provide a clear understanding on how to use the surface functionalities of nanocellulose and to choose the polymer matrix in order to produce the nanocomposite. Here, we considered cellulose nanocrystal (CNC) and cellulose nanofiber (CNF) as the nanocellulosic materials. A brief discussion on their synthesis and properties was also incorporated. This review, overall, is a guide to help in designing polymer/nanocellulose composites through the utilization of nanocellulose properties and the selection of functional polymers, paving the way to specific polymer⁻filler interaction.

Optimisation of grafting of low fouling polymers from three-dimensional scaffolds via surface-initiated Cu(0) mediated polymerisation

Well-controlled low fouling polymers brushes were grafted from the surface of biodegradable electrospun fibres for advanced tissue engineering applications.

“Click-chemical” modification of cellulose acetate nanofibers: a versatile platform for biofunctionalization

We demonstrated a platform for the biofunctionalization of cellulose acetate nanofibers using a new type of click chemistry, namely “sulfur(vi)–fluoride exchange reaction”.

Surface-Initiated Controlled Radical Polymerization: State-of-the-Art, Opportunities, and Challenges in Surface and Interface Engineering with Polymer Brushes

The generation of polymer brushes by surface-initiated controlled radical polymerization (SI-CRP) techniques has become a powerful approach to tailor the chemical and physical properties of interfaces and has given rise to great advances in surface and interface engineering. Polymer brushes are defined as thin polymer films in which the individual polymer chains are tethered by one chain end to a solid interface. Significant advances have been made over the past years in the field of polymer brushes. This includes novel developments in SI-CRP, as well as the emergence of novel applications such as catalysis, electronics, nanomaterial synthesis and biosensing. Additionally, polymer brushes prepared via SI-CRP have been utilized to modify the surface of novel substrates such as natural fibers, polymer nanofibers, mesoporous materials, graphene, viruses and protein nanoparticles. The last years have also seen exciting advances in the chemical and physical characterization of polymer brushes, as well as an ever increasing set of computational and simulation tools that allow understanding and predictions of these surface-grafted polymer architectures. The aim of this contribution is to provide a comprehensive review that critically assesses recent advances in the field and highlights the opportunities and challenges for future work.

pH-Responsive and pyrene based electrospun nanofibers for DNA adsorption and detection

A labeling-free DNA adsorption and detection method based on pH-responsive volume changes poly(DMAEMA-co-SA-co-Py) nanofibers shows its potential applications in DNA adsorption and separation.

Electrospun nanofibres in agriculture and the food industry: a review

The interesting characteristics of electrospun nanofibres, such as high surface-to-volume ratio, nanoporosity, and high safety, make them suitable candidates for use in a variety of applications. In the recent decade, electrospun nanofibres have been applied to different potential fields such as filtration, wound dressing, drug delivery, etc. and a significant number of review papers have been published in these fields. However, the use of electrospun nanofibres in agriculture is comparatively novel and is still in its infancy. In this paper, the specific applications of electrospun nanofibres in agriculture and food science, including plant protection using pheromone-loaded nanofibres, plant protection using encapsulation of biocontrol agents, preparation of protective clothes for farm workers, encapsulation of agrochemical materials, deoxyribonucleic acid extraction in agricultural research studies, pre-concentration and measurement of pesticides in crops and environmental samples, preparation of nanobiosensors for pesticide detection, encapsulation of food materials, fabrication of food packaging materials, and filtration of beverage products are reviewed and discussed. This paper may help researchers develop the use of electrospun nanofibres in agriculture and food science to address some serious problems such as the intensive use of pesticides. © 2016 Society of Chemical Industry.

Superhydrophobic, Hybrid, Electrospun Cellulose Acetate Nanofibrous Mats for Oil/Water Separation by Tailored Surface Modification

Electrospun cellulose acetate nanofibers (CA-NF) have been modified with perfluoro alkoxysilanes (FS/CA-NF) for tailoring their chemical and physical features aiming oil-water separation purposes. Strikingly, hybrid FS/CA-NF showed that perfluoro groups are rigidly positioned on the outer surface of the nanofibers providing superhydrophobic characteristic with a water contact angle of ∼155°. Detailed analysis showed that hydrolysis/condensation reactions led to the modification of the acetylated β(1 → 4) linked d-glucose chains of CA transforming it into a superhydrophobic nanofibrous mat. Analytical data have revealed that CA-NF surfaces can be selectively controlled for fabricating the durable, robust and water resistant hybrid electrospun nanofibrous mat. The -OH groups available on the CA structure allowed the basic sol-gel reactions started by the reactive FS hybrid precursor system which can be monitored by spectroscopic analysis. Since alkoxysilane groups on the perfluoro silane compound are capable of reacting for condensation together with the CA, superhydrophobic nanofibrous mat is obtained via electrospinning. This structural modification led to the facile fabrication of the novel oil/water nanofibrous separator which functions effectively demonstrated by hexane/oil and water separation experiments. Perfluoro groups consequently modified the hydrophilic CA nanofibers into superhydrophobic character and therefore FS/CA-NF could be quite practical for future applications like water/oil separators, as well as self-cleaning or water resistant nanofibrous structures.

Polyaniline–polystyrene membrane for simple and efficient retrieval of double-stranded DNA from aqueous media

Extraction of nucleic acids from biological samples is a necessary step in almost all biotechnological procedures.

Multilayered electrospun fibrous meshes for restenosis-suppressing metallic stents

Nanofiber is a flexible and highly porous mesh that is advantageous for coating bare metal stent and local drug delivery. Herein, we developed drug-eluting stent coated with PCL/PU blending coaxial nanofiber for controlling drug release manner and suppressing in-stent restenosis, which is a representative side effect of stenting surgery. The shell of coaxial electrospun nanofibrous are composed of poly (ε-caprolactone) (PCL) and polyurethane (PU) for biodegradability and elasticity to the polymeric coating of stent. Paclitaxel (PTX) is loaded into both the core and shell through electrospinning using coaxial nozzle with different weight ratio. The morphology of nanofiber-coated stent, expansion state, and core/shell structure of nanofiber were visualized by scanning electron microscope and transmission electron microscope. As more amount of PCL/PU was infused from the outer nozzle, PTX release speed from the nanofiber was increased. And PTX suppressed L6 cell proliferation in vitro expecting potential possibility of PTX-loaded coaxial nanofiber as a drug-eluting stent coating material. © 2015 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 105B: 628-635, 2017.

Removal of a reactive dye and hexavalent chromium by a reusable bacteria attached electrospun nanofibrous web

Bacteria have been immobilized onto a polysulfone nanofibrous web and used for the removal of reactive dye and heavy metal.