Characterization and toxicology evaluation of chitosan nanoparticles on the embryonic development of zebrafish, Danio rerio

Copper-Nanoparticle-Induced Neurotoxic Effect and Oxidative Stress in the Early Developmental Stage of Zebrafish (Danio rerio)

Copper nanoparticles (CuNPs) are extensively used in electronics, cosmetics, fungicides, and various other fields due to their distinctive qualities. However, this widespread usage can contribute to environmental contamination and heightened health risks for living organisms. Despite their prevalent use, the ecological impacts and biosafety of CuNPs remain inadequately understood. The present study aims to delve into the potential toxic effects of CuNPs on zebrafish (Danio rerio) embryos, focusing on multiple indexes such as embryonic development, neurotoxicity, oxidative stress, and inflammatory response. The results revealed a notable increase in the death rate and deformity rate, alongside varying degrees of decrease in hatching rate and heart rate following CuNPs exposure. Particularly, the frequency of spontaneous tail coiling significantly declined under exposure to CuNPs at concentrations of 500 µg/L. Furthermore, CuNPs exposure induced alterations in the transcriptional expression of GABA signaling pathway-related genes (gabra1, gad, abat, and gat1), indicating potential impacts on GABA synthesis, release, catabolism, recovery, and receptor binding. Additionally, CuNPs triggered oxidative stress, evidenced by disruption in superoxide dismutase (SOD), catalase (CAT), and glutathione peroxidase (GPx) activities, along with elevated malondialdehyde (MDA) levels. This oxidative stress subsequently led to a proinflammatory cascade, as demonstrated by the increased transcriptional expression of inflammatory markers (il-1β, tnf-α, il-6, and il-8). Comparative analysis with copper ion (provided as CuCl2) exposure highlighted more significant changes in most indexes with CuCl2, indicating greater toxicity compared to CuNPs at equivalent concentrations. In conclusion, these findings provide valuable insights into the toxic effects of CuNPs on zebrafish embryo development and neurotransmitter conduction. Furthermore, they present technical methodologies for assessing environmental and health risks associated with CuNPs, contributing to a better understanding of their biosafety and ecological impact.

Chitosan-2D Nanomaterial-Based Scaffolds for Biomedical Applications

Chitosan (CS) and two-dimensional nanomaterial (2D nanomaterials)-based scaffolds have received widespread attention in recent times in biomedical applications due to their excellent synergistic potential. CS has garnered much attention as a biomedical scaffold material either alone or in combination with some other material due to its favorable physiochemical properties. The emerging 2D nanomaterials, such as black phosphorus (BP), molybdenum disulfide (MoS2), etc., have taken huge steps towards varying biomedical applications. However, the implementation of a CS-2D nanomaterial-based scaffold for clinical applications remains challenging for different reasons such as toxicity, stability, etc. Here, we reviewed different types of CS scaffold materials and discussed their advantages in biomedical applications. In addition, a different CS nanostructure, instead of a scaffold, has been described. After that, the importance of 2D nanomaterials has been elaborated on in terms of physiochemical properties. In the next section, the biomedical applications of CS with different 2D nanomaterial scaffolds have been highlighted. Finally, we highlighted the existing challenges and future perspectives of using CS-2D nanomaterial scaffolds for biomedical applications. We hope that this review will encourage a more synergistic biomedical application of the CS-2D nanomaterial scaffolds and their utilization clinical applications.

The Chemical Modification to Improve Solubility of Chitosan and Its Derivatives Application, Preparation Method, Toxicity as a Nanoparticles

Chitosan is a functional polymer in the pharmaceutical field, including for nanoparticle drug delivery systems. Chitosan-based nanoparticles are a promising carrier for a wide range of therapeutic agents and can be administered in various routes. Solubility is the main problem for its production and utilization in large-scale industries. Chitosan modifications have been employed to enhance its solubility, including chemical modification. Many reviews have reported the chemical modification but have not focused on the specific characteristics obtained. This review focused on the modification to improve chitosan solubility. Additionally, this review also focused on the application of chitosan derivatives in nanoparticle drug delivery systems since very few similar reviews have been reported. The specific method for chitosan derivative-based nanoparticles was also reported and the latest report of chitosan, chitosan derivative, and chitosan toxicity were also described.

Exploring the current landscape of chitosan-based hybrid nanoplatforms as cancer theragnostic

In the last decade, investigators have put significant efforts to develop several diagnostic and therapeutic strategies against cancer. Many novel nanoplatforms, including lipidic, metallic, and inorganic nanocarriers, have shown massive potential at preclinical and clinical stages for cancer diagnosis and treatment. Each of these nano-systems is distinct with its own benefits and limitations. The need to overcome the limitations of single-component nano-systems, improve their morphological and biological features, and achieve multiple functionalities has resulted in the emergence of hybrid nanoparticles (HNPs). These HNPs integrate multicomponent nano-systems with diagnostic and therapeutic functions into a single nano-system serving as promising nanotools for cancer theragnostic applications. Chitosan (CS) being a mucoadhesive, biodegradable, and biocompatible biopolymer, has emerged as an essential element for the development of HNPs offering several advantages over conventional nanoparticles including pH-dependent drug delivery, sustained drug release, and enhanced nanoparticle stability. In addition, the free protonable amino groups in the CS backbone offer flexibility to its structure, making it easy for the modification and functionalization of CS, resulting in better drug targetability and cell uptake. This review discusses in detail the existing different oncology-directed CS-based HNPs including their morphological characteristics, in-vitro/in-vivo outcomes, toxicity concerns, hurdles in clinical translation, and future prospects.

Efficient adsorption of azo anionic dye Congo Red by micro-nano metal-organic framework MIL-68(Fe) and MIL-68(Fe)/chitosan composite sponge: Preparation, characterization and adsorption performance

Micro-nano metal-organic framework (MIL-68(Fe)) for efficient adsorption of azo anionic dye Congo red (CR) was successfully prepared by one-step hydrothermal method under acidic environment. And a MIL-68(Fe)/chitosan composite sponge (MIL-68(Fe)/CS) was prepared under the coating of chitosan (CS). After comparing the performance of MIL-68(Fe) and MIL-68(Fe)/CS, we focus on exploring MIL-68(Fe)/CS. It ensured the CR removal efficiency while reaching the adsorption equilibrium faster than MIL-68(Fe), and solved the defect that the powder was difficult to be stripped by water after adsorption. The physicochemical properties and surface morphology of the adsorbent were characterized by SEM, FTIR, XRD, TGA, BET, and Zeta potential. The effects of pH, contact time, adsorbent dosage, initial solution concentration and temperature on the adsorption performance of the adsorbent were systematically analyzed. The pseudo-second-order model and the Sips model were most consistent for the adsorption process, indicating that the adsorption process of MIL-68(Fe)/chitosan composite sponge on CR is a complex physicochemical process. The removal rates of CR by MIL-68(Fe) and MIL-68(Fe)/chitosan composite sponge reached the maximum values of 99.55 % and 99.51 % at 318 K, respectively. And the maximum adsorption capacity of CR by MIL-68(Fe)/chitosan composite sponge at 318 K was 1184.16 mg·g-1. After six cycles of adsorption and desorption, the removal rate of CR was still higher than 80 %. The synergistic effects of π-π stacking, electrostatic interactions, hydrogen bonding and pore filling have important effects on CR removal.

Chitosan nanoparticle toxicity: A comprehensive literature review of in vivo and in vitro assessments for medical applications

Topic definition

This literature review aims to update the current knowledge on toxicity of chitosan nanoparticles, compare the recent findings and identify the gaps with knowledge that is present for the chitosan nanoparticles.

Methods

The publications between 2010 and 2020 were searched in Science Direct, Pubmed.gov, Google Scholar, Research Gate, and ClinicalTrials.gov, according to the inclusion and exclusion criteria. 30 primary research studies were obtained from the literature review to compare the in vitro in vivo toxicity profiles among the chitosan nanoparticles.

Major highlights

Chitosan nanoparticles and other types of nanoparticles show cytotoxic effects on cancer cells while having minimal toxicity on normal cells. This apparent effect poses some considerations for use in incorporating cancer therapeutics into chitosan nanoparticles as an administration form. The concentration, duration of exposure, and pH of the solution can influence nanoparticle cytotoxicity, particularly in zebrafish. Different cell lines exhibit varying degrees of toxicity when exposed to nanoparticles, and of note are liver cells that show toxicity under exposure as indicated by increased alanine transaminase (ALT) levels. Aside from ALT, platelet aggregation can be considered a toxicity induced by chitosan nanoparticles. In addition, zebrafish cells experience the most toxicity, including organ damage, neurobehavioral impairment, and developmental abnormalities, when exposed to nanoparticles. However, nanoparticles may exhibit different toxicity profiles in different organisms, with brain toxicity and liver toxicity being present in zebrafish but not rats. Different organs exhibit varying degrees of toxicity, with the eye and mouth apparently having the lowest toxicity, while the brain, intestine, muscles and lung showing mixed results. Cardiotoxicity induced by chitosan nanoparticles was not observed in zebrafish embryos, and nanoparticles may reduce cardiotoxicity when delivering drug. Toxicity found in an organ may not necessarily mean that it is toxic towards all the cells found in that organ, as muscle toxicity was present when tested in zebrafish but not in C2C12 myoblast cells. Some of the studies conducted may have limitations that need to be reconsidered to account for differing results, with some examples being two experiments done on HeLa cells where one study concluded chitosan nanoparticles were toxic to the cells while the other seems to have no toxicity present. With regards to LD50, one study has stated the concentration of 64.21 mg/ml was found. Finally, smaller nanoparticles generally exhibit higher toxicity in cells compared to larger nanoparticles.

Scope for future work

This literature review did not uncover any published clinical trials with available results. Subsequent research endeavors should prioritize conducting clinical trials involving human volunteers to directly assess toxicity, rather than relying on cell or animal models.

Emerging micropollutants in aquatic ecosystems and nanotechnology-based removal alternatives: A review

There is a significant concern about the accessibility of uncontaminated and safe drinking water, a fundamental necessity for human beings. This concern is attributed to the toxic micropollutants from several emission sources, including industrial toxins, agricultural runoff, wastewater discharges, sewer overflows, landfills, algal blooms and microbiota. Emerging micropollutants (EMs) encompass a broad spectrum of compounds, including pharmaceutically active chemicals, personal care products, pesticides, industrial chemicals, steroid hormones, toxic nanomaterials, microplastics, heavy metals, and microorganisms. The pervasive and enduring nature of EMs has resulted in a detrimental impact on global urban water systems. Of late, these contaminants are receiving more attention due to their inherent potential to generate environmental toxicity and adverse health effects on humans and aquatic life. Although little progress has been made in discovering removal methodologies for EMs, a basic categorization procedure is required to identify and restrict the EMs to tackle the problem of these emerging contaminants. The present review paper provides a crude classification of EMs and their associated negative impact on aquatic life. Furthermore, it delves into various nanotechnology-based approaches as effective solutions to address the challenge of removing EMs from water, thereby ensuring potable drinking water. To conclude, this review paper addresses the challenges associated with the commercialization of nanomaterial, such as toxicity, high cost, inadequate government policies, and incompatibility with the present water purification system and recommends crucial directions for further research that should be pursued.

Solid-State NMR-Based Metabolomics Imprinting Elucidation in Tissue Metabolites, Metabolites Inhibition, and Metabolic Hub in Zebrafish by Chitosan

In this study, we demonstrated that chitosan-applied zebrafish (Danio rerio) tissue metabolite alteration, metabolic discrimination, and metabolic phenotypic expression occurred. The spectroscopy of solid-state ¹H nuclear magnetic resonance (ss ¹H-NMR) has been used. Chitosan has no, or low, toxicity and is a biocompatible biomaterial; however, the metabolite mechanisms underlying the biological effect of chitosan are poorly understood. The zebrafish is now one of the most popular ecotoxicology models. Zebrafish were exposed to chitosan concentrations of 0, 50, 100, 200, and 500 mg/L, and the body tissue was subjected to metabolites-targeted profiling. The zebrafish samples were measured via solvent-suppressed and T₂-filtered methods with in vivo zebrafish metabolites. The metabolism of glutamate, glutamine, glutathione (GSH), taurine, trimethylamine (TMA), and its N-oxide (TMAO) is also significantly altered. Here, we report the quantification of metabolites and the biological application of chitosan. The metabolomics profile of chitosan in zebrafish has been detected, and the results indicated disturbed amino acid metabolism, the TCA cycle, and glycolysis. Our results demonstrate the potential of comparative metabolite profiling for discovering bioactive metabolites and they highlight the power of chitosan-applied chemical metabolomics to uncover new biological insights.

Evaluation of methyl orange adsorption potential of green synthesized chitosan-silver nanocomposite (CS-AgNC) and its notable biocompatibility on freshwater Tilapia (Oreochromis nitoticus)

Nanomaterials mainly nanocomposites possess unique physical and chemical properties which makes them superior and indispensable. Though much research has been focused on the properties and application of nanocomposites, the eco-toxicity assessment is one among top priority, which aims to protect the population of concerned biological component and their ecosystem. With this objective, the present study has undertaken an initiation to evaluate the efficacy of chitosan-silver nanocomposite for methyl orange adsorption property (CS-AgNC) and also assessed the toxicity impact on growth parameters of freshwater Tilapia. Batch in vitro studies showed that all the tested dosages of the nanocomposite were effectively adsorbing maximum concentration of methyl orange. The synthesized nanocomposite was administrated to the tested fishes followed by the determination of various growth, nutritional parameters, gene expression of enzymatic antioxidants and liver, and intestinal tissues histology. Obtained results indicated that nanocomposite treatment was not projected as a toxic impact on all the tested growth, and nutritional parameters. Histology study showed that the exposure of Tilapia to nanocomposite has not shown any detrimental effect on antioxidants gene expression and liver, intestinal tissue architecture. Hence, all these findings indicated that chitosan-silver nanocomposite prepared in our present system was found to be biocompatible which suggested the possible utilization and release of the nanocomposite into the divergent ecosystem without affecting non-target organisms (NTO).

Preparation of Novel Nanoformulation to Enhance Efficacy in the Treatment of Cardiovascular Disease

Despite many efforts over the last few decades, cardiac-based drug delivery systems are experiencing major problems, such as the effective delivery of the precise amount of a drug. In the current study, an effort has been made to prepare a nano-herbformulation (NHF) to overcome the major problem of conventional intervention. Copper oxide-based NHF was prepared using plant extract of Alternanthera sessilis and characterized using physicochemical techniques such as Transmission electron microscopy (TEM), X-ray powder diffraction (XRD), Dynamic light scattering (DLS), UV-Vis spectroscopy, and Fourier-transform infrared spectroscopy (FTIR). TEM analysis revealed that spherical NHF obtained of size 20-50 nm. In addition, XRD and FTIR confirmed the presence of phytochemicals with biological properties over the surface of copper oxide-based NHF. It was demonstrated that dose-dependent antiapoptotic activity was shown against DOX-induced cardiomyocytes, where ROS levels were significantly reduced to 0.29% from 37.99%. The results of the flow cytometry analysis using PI and Annexin staining further confirmed the antiapoptotic activity of NHF against DOX-induced cardiomyocytes by ROS scavenging. Thus, NHF might be used for cardiovascular disease treatment.

Toxicological assessment of functional polymer with single-walled carbon nanotubes in zebrafish embryos and its gill cell line

Carbon nanotubes (CNTs) have been widely used in developing polymer hybrid coatings for anticorrosive application. In the present study, poly [(3,5-dimethyl-lH-pyrazole-1-yl) methyl methacrylate-co-glycidyl methacrylate] (PyM) was prepared by solution polymerization. Single-wall carbon nanotubes (SWCNT) were incorporated in the PyM by solution blending technique at different proportions. The PyM and its SWCNT (PyM-SWCNT) nanocomposites were characterized by FT-IR spectroscopy, X-Ray Diffraction, FE-SEM and HR-TEM. Different concentrations of PyM or PyM-SWCNT prepared in the present study were assessed separately for their toxicity by in vivo and in vitro assays using zebrafish embryos and gill cell line of zebrafish (DrG), respectively. The nanocomposites at the concentration of 400 μg ml^-1 of PyM in 1.0% of SWCNT was found to be non-toxic and recommended for anticorrosive application whereas the nanocomposites with above 1% of SWCNT was found to be toxic. The nanocomposites with 1.5% of SWCNT delayed the hatching rate of eggs, decreased survival rate and heart beat in zebrafish embryos, and induced the morphological changes in DrG cells. Gene expression studies revealed that PyM-SWCNT with high concentration of SWCNT induced oxidative stress by activating ROS generations in zebrafish embryos and DrG cells. The immersion study of uncoated and coated with recommended concentration of PyM-SWCNT on mild steel (MS) in sea water was studied using FE-SEM and EDS, and the results showed effective corrosion protection without leaching behaviour. The nanocomposites with novel polymer in the present study may be used in the industry for anticorrosive purpose.

Safety Assessment of Nanomaterials in Cosmetics: Focus on Dermal and Hair Dyes Products

Nanomaterials use in cosmetics is markedly enhancing, so their exposure and toxicity are important parameters to consider for their risk assessment. This review article provides an overview of the active cosmetic ingredients used for cosmetic application, including dermal cosmetics and also hair dye cosmetics, as well as their safety assessment, enriched with a compilation of the safety assessment tests available to evaluate the different types of toxicity. In fact, despite the increase in research and the number of papers published in the field of nanotechnology, the related safety assessment is still insufficient. To elucidate the possible effects that nanosized particles can have on living systems, more studies reproducing similar conditions to what happens in vivo should be conducted, particularly considering the complex interactions of the biological systems and active cosmetic ingredients to achieve newer, safer, and more efficient nanomaterials. Toward this end, ecological issues and the toxicological pattern should also be a study target.

Comparative efficiency of silica gel, biochar, and plant growth promoting bacteria on Cr and Pb availability to Solanum melongena L. in contaminated soil irrigated with wastewater

Crop irrigation with untreated wastewater is a routine practice in developing countries that causes multiple human health consequences. A comparative study was performed to regulate total Cr and Pb stress in soil and Solanum melongena L. plant. For this purpose, 0.2% chitosan polymerized silica gel (CP-silica gel), 1.5% zinc-enriched biochar (ZnBc), and three bacterial species such as Trichococcus sp. (B1), Pseudomonas alcaligenes (B2), and Bacillus subtilis (B3) were selected. Initially, a biosorption trial was conducted to test the heavy metal removal efficiency of three bacterial species B1, B2, and B3 for 24 h. Hence, B3 showed maximum Cr and Pb removal efficiency among the studied bacterial isolates. Then, a pot study was conducted with 12 different treatments having three replicates. After harvesting, different growth and biochemical parameters such as chlorophyll concentration, proteins, phenolics, reactive oxygen species, and antioxidant enzymes were analyzed. The results demonstrated that wastewater application significantly (p ≤ 0.01) reduced the fresh and dry weights of the root, stem, and leaves due to high total Cr and Pb toxicity. However, CP-silica gel and ZnBc treatments performed best when applied in combination with B3. The concentration of leaf total Cr was significantly decreased (91 and 85%) with the application of ZnBc + B3 and CP-Silica gel + B3, respectively, as compared to control. There was a reduction in stem hydrogen peroxide (87%) and malondialdehyde (81%) recorded with CP-silica gel + B3 treatment due to enhanced activities of antioxidant enzymes viz. ascorbate peroxidase (6-folds) and catalase (7-folds) relative to control. Similarly, leaf total phenolics (3-folds) and protein (6-folds) contents were enhanced with CP silica gel+B3 application relative to control. Overall, CP-silica gel and ZnBc with B3 application proved to be the most appropriate treatments and can be used in developing countries to limit the deleterious effects of total Cr and Pb pollution.

In vitro toxicological assessment and biosensing potential of bioinspired chitosan nanoparticles, selenium nanoparticles, chitosan/selenium nanocomposites, silver nanoparticles and chitosan/silver nanocomposites

Hydrogen peroxide (H₂O₂) is widely used in various industries and biological fields. H₂O₂ rapidly contaminants with water resources and hence simple detection process is highly wanted in various fields. The present study was focused on the biosensing, antimicrobial and embryotoxicity of bioinspired chitosan nanoparticles (Cs NPs), selenium nanoparticles (Se NPs), chitosan/selenium nanocomposites (Cs/Se NCs), silver nanoparticles (Ag NPs) and chitosan/silver nanocomposites (Cs/Ag NCs) synthesized using the aqueous Cucurbita pepo Linn. leaves extract. The physico-chemical properties of as-synthesized nanomaterials were confirmed by various spectroscopic and microscopic techniques. Further, hydrogen peroxide (H₂O₂) sensing properties and their sensitivities were confirmed by cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS) and chronoamperometry (CA) methods, in which Cs/Ag NCs showed pronounced sensing properties. In addition, the mode of antibacterial interaction results clearly demonstrated the effective inhibitory activity of as-prepared Ag NPs and Cs/Ag NCs against Gram negative pathogenic bacteria. The highest embryotoxicity was recorded at 0.19 μg/ml of Ag NPs and 1.56 μg/ml of Se NPs. Intriguingly, the embryo treated with Cs/Se NCs and Cs/Ag NCs significantly reduced the toxicity in the presence of Cs matrix. However, Cs/Se NCs did not show good response in H₂O₂ sensing than the Cs/Ag NCs, implying the biocompatibility of Cs/Ag NCs. Overall, the obtained results clearly suggest that Cs/Ag NCs could be suitable for dual applications such as for the detection of environmental pollutant biosensors and for biomedical research.

Comprehensive Review on the Degradation Chemistry and Toxicity Studies of Functional Materials

In recent decades there has been growing interest of material chemists in the successful development of functional materials for drug delivery, tissue engineering, imaging, diagnosis, theranostic, and other biomedical applications with advanced nanotechnology tools. The efficacy and safety of functional materials are determined by their pharmacological, toxicological, and immunogenic effects. It is essential to consider all degradation pathways of functional materials and to assess plausible intermediates and final products for quality control. This review provides a brief insight into chemical degradation mechanisms of functional materials like oxidation, photodegradation, and physical and enzymatic degradation. The intermediates and products of degradation were confirmed with analytical methods such as proton nuclear magnetic resonance (¹H NMR), gel permeation chromatography (GPC), UV-vis spectroscopy (UV-vis), infrared spectroscopy (IR), differential scanning calorimetry (DSC), mass spectroscopy, and other sophisticated analytical methods. These analytical methods are also used for regulatory, quality control, and stability purposes in industry. The assessment of degradation is important to predetermine the behavior of functional materials in specific storage conditions and can be relevant to their behavior during in vivo applications. Another important aspect is the evaluation of the toxicity of functional materials. Toxicity can be accessed with various methods using in vitro, in vivo, ex vivo, and in silico models. In vitro cell culture methods are used to determine mitochondrial damage, reactive oxygen species, stress responses, and cellular toxicity. In vitro cellular toxicity can be measured by MTT assay, LDH leakage assay, and hemolysis. In vivo studies are performed using various animal models involving zebrafish, rodents (mice and rats), and nonhuman primates. Ex vivo studies are also used for efficacy and toxicity determinations of functional materials like ex vivo potency assay and precision-cut liver slice (PCLS) models. The in silico tools with computational simulations like quantitative structure-activity relationships (QSAR), pharmacokinetics (PK) and pharmacodynamics (PD), dose and time response, and quantitative cationic-activity relationships ((Q)CARs) are used for prediction of the toxicity of functional materials. In this review, we studied the principle methods used for degradation studies, different degradation pathways, and mechanisms of functional material degradation with prototype examples. We discuss toxicity assessments with different toxicity approaches used for estimation of the safety and efficacy of functional materials.

Chrysin-Loaded Chitosan Nanoparticle-Mediated Neuroprotection in Aβ1-42-Induced Neurodegenerative Conditions in Zebrafish

Amyloid β plaques and neurofibrillary tangles are the characteristic features of Alzheimer's disease (AD). Plaques of amyloid β play a pivotal role in affecting cognitive functions and memory. Alzheimer's disease is a progressive neurodegenerative disease and is one of the leading causes of dementia worldwide. Several treatment strategies focusing on the amyloid cascade have been implemented to treat AD. The blood-brain barrier (BBB) poses the main obstructive barrier by refraining drugs from penetrating the brain. Nanotechnology is a promising research field for brain drug delivery using nanosized particles. Zebrafish is emerging as a model of interest to elaborate on brain targeting and nanotechnology-based therapeutics for neurodegenerative diseases. In the current study, we have synthesized and characterized chrysin-loaded chitosan nanoparticles (Chr-Chi NPs) and evaluated them for neuroprotection against amyloid-β-induced toxicity. We find that treatment with Chr-Chi NPs helps to retain memory, cognition, and synaptic connections, which are otherwise compromised due to Aβ_1-42 toxicity. The NPs further help in reducing aggregates of amyloid β, thus decreasing neuronal death and generation of reactive oxygen species (ROS). Taken together, our study brings to light a novel strategy for treating AD by a combined action on the neurons and amyloid aggregates mediated by chrysin and chitosan, respectively. Chr-Chi NPs, therefore, have the potential to provide a beneficial combinatorial treatment strategy for AD.

Chitosan-Based Nanogels: Synthesis and Toxicity Profile for Drug Delivery to Articular Joints

One important challenge in treating avascular-degraded cartilage is the development of new drugs for both pain management and joint preservation. Considerable efforts have been invested in developing nanosystems using biomaterials, such as chitosan, a widely used natural polymer exhibiting numerous advantages, i.e., non-toxic, biocompatible and biodegradable. However, even if chitosan is generally recognized as safe, the safety and biocompatibility of such nanomaterials must be addressed because of potential for greater interactions between nanomaterials and biological systems. Here, we developed chitosan-based nanogels as drug-delivery platforms and established an initial biological risk assessment for osteocartilaginous applications. We investigated the influence of synthesis parameters on the physicochemical characteristics of the resulting nanogels and their potential impact on the biocompatibility on all types of human osteocartilaginous cells. Monodisperse nanogels were synthesized with sizes ranging from 268 to 382 nm according to the acidic solution used (i.e., either citric or acetic acid) with overall positive charge surface. Our results demonstrated that purified chitosan-based nanogels neither affected cell proliferation nor induced nitric oxide production in vitro. However, nanogels were moderately genotoxic in a dose-dependent manner but did not significantly induce acute embryotoxicity in zebrafish embryos, up to 100 µg∙mL⁻¹. These encouraging results hold great promise for the intra-articular delivery of drugs or diagnostic agents for joint pathologies.

Chitosan Nanoparticle-Based System: A New Insight into the Promising Controlled Release System for Lung Cancer Treatment

Lung cancer has been recognized as one of the most often diagnosed and perhaps most lethal cancer diseases worldwide. Conventional chemotherapy for lung cancer-related diseases has bumped into various limitations and challenges, including non-targeted drug delivery, short drug retention period, low therapeutic efficacy, and multidrug resistance (MDR). Chitosan (CS), a natural polymer derived from deacetylation of chitin, and comprised of arbitrarily distributed β-(1-4)-linked d-glucosamine (deacetylated unit) and N-acetyl-d-glucosamine (acetylated unit) that exhibits magnificent characteristics, including being mucoadhesive, biodegradable, and biocompatible, has emerged as an essential element for the development of a nano-particulate delivery vehicle. Additionally, the flexibility of CS structure due to the free protonable amino groups in the CS backbone has made it easy for the modification and functionalization of CS to be developed into a nanoparticle system with high adaptability in lung cancer treatment. In this review, the current state of chitosan nanoparticle (CNP) systems, including the advantages, challenges, and opportunities, will be discussed, followed by drug release mechanisms and mathematical kinetic models. Subsequently, various modification routes of CNP for improved and enhanced therapeutic efficacy, as well as other restrictions of conventional drug administration for lung cancer treatment, are covered.

A Review on Conventional and Advanced Methods for Nanotoxicology Evaluation of Engineered Nanomaterials

Nanotechnology can be defined as the field of science and technology that studies material at nanoscale (1-100 nm). These nanomaterials, especially carbon nanostructure-based composites and biopolymer-based nanocomposites, exhibit excellent chemical, physical, mechanical, electrical, and many other properties beneficial for their application in many consumer products (e.g., industrial, food, pharmaceutical, and medical). The current literature reports that the increased exposure of humans to nanomaterials could toxicologically affect their environment. Hence, this paper aims to present a review on the possible nanotoxicology assays that can be used to evaluate the toxicity of engineered nanomaterials. The different ways humans are exposed to nanomaterials are discussed, and the recent toxicity evaluation approaches of these nanomaterials are critically assessed.

Dental Implant Nano-Engineering: Advances, Limitations and Future Directions

Titanium (Ti) and its alloys offer favorable biocompatibility, mechanical properties and corrosion resistance, which makes them an ideal material choice for dental implants. However, the long-term success of Ti-based dental implants may be challenged due to implant-related infections and inadequate osseointegration. With the development of nanotechnology, nanoscale modifications and the application of nanomaterials have become key areas of focus for research on dental implants. Surface modifications and the use of various coatings, as well as the development of the controlled release of antibiotics or proteins, have improved the osseointegration and soft-tissue integration of dental implants, as well as their antibacterial and immunomodulatory functions. This review introduces recent nano-engineering technologies and materials used in topographical modifications and surface coatings of Ti-based dental implants. These advances are discussed and detailed, including an evaluation of the evidence of their biocompatibility, toxicity, antimicrobial activities and in-vivo performances. The comparison between these attempts at nano-engineering reveals that there are still research gaps that must be addressed towards their clinical translation. For instance, customized three-dimensional printing technology and stimuli-responsive, multi-functional and time-programmable implant surfaces holds great promise to advance this field. Furthermore, long-term in vivo studies under physiological conditions are required to ensure the clinical application of nanomaterial-modified dental implants.

Zebrafish: A Promising Real-Time Model System for Nanotechnology-Mediated Neurospecific Drug Delivery

Delivering drugs to the brain has always remained a challenge for the research community and physicians. The blood-brain barrier (BBB) acts as a major hurdle for delivering drugs to specific parts of the brain and the central nervous system. It is physiologically comprised of complex network of capillaries to protect the brain from any invasive agents or foreign particles. Therefore, there is an absolute need for understanding of the BBB for successful therapeutic interventions. Recent research indicates the strong emergence of zebrafish as a model for assessing the permeability of the BBB, which is highly conserved in its structure and function between the zebrafish and mammals. The zebrafish model system offers a plethora of advantages including easy maintenance, high fecundity and transparency of embryos and larvae. Therefore, it has the potential to be developed as a model for analysing and elucidating the permeability of BBB to novel permeation technologies with neurospecificity. Nanotechnology has now become a focus area within the industrial and research community for delivering drugs to the brain. Nanoparticles are being developed with increased efficiency and accuracy for overcoming the BBB and delivering neurospecific drugs to the brain. The zebrafish stands as an excellent model system to assess nanoparticle biocompatibility and toxicity. Hence, the zebrafish model is indispensable for the discovery or development of novel technologies for neurospecific drug delivery and potential therapies for brain diseases.

A comparative study on chitosan nanoparticle synthesis methodologies for application in aquaculture through toxicity studies

Chitosan nanoparticles (CSNPs) have been recently used for various applications in aquaculture, especially as drug carriers. The aim of this study was to synthesise and investigate a superlative method of CSNP synthesis for application in aquaculture through aquaculture-based toxicology screening methods. Two different methods were analysed: the first a direct ionic gelation method (A) and the other involving a low-molecular-weight chitosan microparticle intermediate method (B). Dynamic light scattering characterisation revealed that the CSNP particle sizes were 192.7 ± 11.8 and 22.9 nm from methods A and B, respectively. The LC50 values for brine shrimp toxicity were found to be 1.51 and 0.02 ppt in 24 h for methods A and B, respectively. Acute toxicity studies in Litopenaeus vannamei rendered LC50 values of 3235.94 and 2884.03 ppt in 24 h for methods A and B, respectively. Zebrafish toxicity studies revealed mortality rates of 21.67% and 55% at 20 mg/L concentration for methods A and B, respectively, with an increased expression of intracellular reactive oxygen species in method B. From these findings, it can be concluded that a comparatively reduced toxicity of CSNPs derived from ionic gelation method makes it more appropriate for application in aquaculture.

Ecotoxicity evaluation of polymeric nanoparticles loaded with ascorbic acid for fish nutrition in aquaculture

Background

Ascorbic acid (AA) is a micronutrient essential for the mechanisms of reproduction, growth, and defense in fish. However, the biosynthesis of this micronutrient does not occur in fish, so it must be supplied with food. A difficulty is that plain AA is unstable, due to the effects of light, high temperature, and oxygen, among others. The use of nanoencapsulation may provide protection and preserve the physicochemical characteristics of AA for extended periods of time, decreasing losses due to environmental factors.

Method

This study evaluated the protective effect of nanoencapsulation in polymeric nanoparticles (chitosan and polycaprolactone) against AA degradation. Evaluation was made of the physicochemical stability of the nanoformulations over time, as well as the toxicological effects in zebrafish (Danio rerio), considering behavior, development, and enzymatic activity. For the statistical tests, ANOVA (two-way, significance of p < 0.05) was used.

Results

Both nanoparticle formulations showed high encapsulation efficiency and good physicochemical stability during 90 days. Chitosan (CS) and polycaprolactone (PCL) nanoparticles loaded with AA had mean diameters of 314 and 303 nm and polydispersity indexes of 0.36 and 0.28, respectively. Both nanosystems provided protection against degradation of AA exposed to an oxidizing agent, compared to plain AA. Total degradation of AA was observed after 7, 20, and 480 min for plain AA, the CS nanoparticle formulation, and the PCL nanoparticle formulation, respectively. For zebrafish larvae, the LC₅₀ values were 330.7, 57.4, and 179.6 mg/L for plain AA, the CS nanoparticle formulation, and the PCL nanoparticle formulation, respectively. In toxicity assays using AA at a concentration of 50 mg/L, both types of nanoparticles loaded with AA showed lower toxicity towards the development of the zebrafish, compared to plain AA at the same concentration. Although decreased activity of the enzyme acetylcholinesterase (AChE) did not affect the swimming behavior of zebrafish larvae in the groups evaluated, it may have been associated with the observed morphometric changes, such as curvature of the tail.

Conclusions

This study showed that the use of nanosystems is promising for fish nutritional supplementation in aquaculture. In particular, PCL nanoparticles loaded with AA seemed to be most promising, due to higher protection against AA degradation, as well as lower toxicity to zebrafish, compared to the chitosan nanoparticles. The use of nanotechnology opens new perspectives for aquaculture, enabling the reduction of feed nutrient losses, leading to faster fish growth and improved sustainability of this activity.

Graphic Abstract

Supplementary Information

The online version contains supplementary material available at 10.1186/s12951-021-00910-8.

Eradication of Intracellular Salmonella Typhimurium by Polyplexes of Acid-Transforming Chitosan and Fragment DNA

Antibiotics are highly successful against microbial infections. However, current challenges include rising antibiotic resistance rates and limited efficacy against intracellular pathogens. A novel form of a nanomaterial-based antimicrobial agent is investigated for efficient treatment of an intracellular Salmonella enterica sv Typhimurium infection. A known antimicrobial polysaccharide, chitosan, is engineered to be readily soluble under neutral aqueous conditions for systemic administration. The modified biologic, named acid-transforming chitosan (ATC), transforms into an insoluble, antimicrobial compound in the mildly acidic intracellular compartment. In cell culture experiments, ATC is confirmed to have antimicrobial activity against intracellular S. Typhimurium in a concentration- and pH-dependent manner, without affecting the host cells, RAW264.7 macrophages. For improved cellular uptake and pharmacokinetic/pharmacodynamic properties, ATC is further complexed with fragment DNA (fDNA), to form nano-sized spherical polyplexes. The resulting ATC/fDNA polyplexes efficiently eradicated S. Typhimurium from RAW264.7 macrophages. ATC/fDNA polyplexes may bind with microbial wall and membrane components. Consistent with this expectation, transposon insertion sequencing of a complex random mutant S. Typhimurium library incubated with ATC does not reveal specific genomic target regions of the antimicrobial. This study demonstrates the utility of a molecularly engineered nanomaterial as an efficient and safe antimicrobial agent, particularly against an intracellular pathogen.

In Vivo Toxicity Assessment of Chitosan-Coated Lignin Nanoparticles in Embryonic Zebrafish (Danio rerio)

Lignin is the second most abundant biopolymer on Earth after cellulose. Since lignin breaks down in the environment naturally, lignin nanoparticles may serve as biodegradable carriers of biocidal actives with minimal environmental footprint compared to conventional antimicrobial formulations. Here, a lignin nanoparticle (LNP) coated with chitosan was engineered. Previous studies show both lignin and chitosan to exhibit antimicrobial properties. Another study showed that adding a chitosan coating can improve the adsorption of LNPs to biological samples by electrostatic adherence to oppositely charged surfaces. Our objective was to determine if these engineered particles would elicit toxicological responses, utilizing embryonic zebrafish toxicity assays. Zebrafish were exposed to nanoparticles with an intact chorionic membrane and with the chorion enzymatically removed to allow for direct contact of particles with the developing embryo. Both mortality and sublethal endpoints were analyzed. Mortality rates were significantly greater for chitosan-coated LNPs (Ch-LNPs) compared to plain LNPs and control groups. Significant sublethal endpoints were observed in groups exposed to Ch-LNPs with chorionic membranes intact. Our study indicated that engineered Ch-LNP formulations at high concentrations were more toxic than plain LNPs. Further study is warranted to fully understand the mechanisms of Ch-LNP toxicity.

Chitosan with Bentonite and Biochar in Ni-Affected Soil Reduces Grain Ni Concentrations, Improves Soil Enzymes and Grain Quality in Lentil

Ecological and human health risks associated with Ni-affected soils are one of the major attention seeking issues nowadays. The current investigation is based on the usage of biochar (BR), chitosan (CN), bentonite (BE), and their mixture to immobilize Ni in a Ni-polluted soil and accordingly contracted Ni distribution in lentil plant parts, improved grain nutritional quality, antioxidant defense system, and soil enzymatic activities. The soil was initially amended with CN, BE, and BR and later lentil was grown in this soil in pots. Results depicted the highest significance of BE+CN treatment in terms of reducing the Ni distribution in the roots, shoots, grain, and DTPA-extractable fractions, relative to control treatment. Contrarily, the BR+CN treatment displayed the minimum oxidative stress and the utmost plant growth, chlorophyll contents in the leaves, relative water content (RWC), micronutrient concentrations, and grain biochemistry. The BR+CN indicated the highest activities of soil enzymes. Based on the results, we recommend BE+CN treatment to reduce the Ni distribution in the lentil plant. Although, improvement in plant growth, grain quality, soil enzymes, and a significant reduction in plant oxidative stress can only be gained with BR+CN.

Zebrafish: A Promising Model for Evaluating the Toxicity of Carbon Dot-Based Nanomaterials

Carbon dots (CDs) exhibit a wide range of desirable properties including excellent photoluminescence, photostability, and water solubility, making them ideally suitable for use in the context of drug delivery, bioimaging, and related biomedical applications. Before these CDs can be translated for use in humans, however, further research regarding their in vivo toxicity is required. Owing to their low cost, rapid growth, and significant homology to humans, zebrafish (Danio rerio) are commonly employed as in vivo model systems in the toxicity studies of nanomaterials. In the present report, our group employed a hydrothermal approach to synthesize CDs and then assessed their toxicity in zebrafish. The resultant CDs were roughly 2.4 nm spheroid particles that emitted strong blue fluorescence in response to the excitation at 365 nm. These CDs did not induce any evident embryonic toxicity or did cause any apparent teratogenic effects during hatching or development when dosed at 150 μg/mL. However, significant effects were observed in zebrafish embryos at CD concentrations >200 μg/mL, including pericardial and yolk sac edema, delayed growth, spinal cord flexure, and death. These high CD concentrations were further associated with the reduction in zebrafish larval locomotor activity and decreased dopamine levels, reduced frequencies of tyrosine hydroxylase-positive dopaminergic neurons, and multiple organ damage. Further studies will be required to fully understand the mechanistic basis for CD-mediated neurotoxicity, with such studies being essential to fully understand the translational potential of these unique nanomaterials.

Scale-up of non-toxic poly(butylene adipate-co-terephthalate)-Chitin based nanocomposite articles by injection moulding and 3D printing

Poly(butylene adipate-co-terephthalate) (PBAT), a compostable polymer, filled with different weight percentage of unbleached nano chitin (NC; 10%, 30% and 50%), a biodegradable filler from crustacean waste, were prepared from the extruded blends by injection moulding and 3D printing. The nanochitin required was prepared from chitin isolated from prawn shells (Fenneropenaeus indicus). The nanochitin crystals were observed to contain carboxylic acid surface functional groups as assessed by FT-IR, ¹³C solid state NMR (SS NMR) spectroscopy, zeta potential measurements and the extent of the same was estimated by potentiometric titration. The PBAT-NC nanocomposites were characterized SS NMR spectroscopy, FT-IR spectroscopy, wide angle X-ray diffraction, dynamic mechanical analysis, DSC and TGA. Thermal and mechanical properties of the nanocomposites were determined. The moulded nanocomposites changed more and more rigid with increasing weight percentage of NC without significant change in the tensile strength. The TGA indicated that the thermal stability of PBAT could be improved but not significantly by the addition of NC. Wound healing was enhanced in the presence of the nanocomposite while in vivo toxicity was significant at high concentration. The PBAT-NC nanocomposites could be moulded in to useful articles such as laptop charger cover, rat cover for washing machine, planters and key holders under conditions similar to that used in the processing of LDPE.

Characterization and toxicology evaluation of low molecular weight chitosan on zebrafish

Chitosan is suggested as no or low toxicity and biocompatible biomaterial. Digestion of chitosan to reduce molecular weight and formulate nanoparticle was generally used to improve efficiency for DNA or protein delivery. However, the toxicity of low-molecular-weight chitosan (LMWCS) towards freshwater fishes has not been well evaluated. Here, we reported the toxic mechanism of LMWCS using zebrafish (Danio rerio) liver (ZFL) cell line, zebrafish larvae, and adult fish. LMWCS rapidly induced cytotoxicity of ZFL cells and death of zebrafish. Cell membrane damaged by LMWCS reduced cell viability. Damaged membrane of epithelial cell in zebrafish larvae induced breakage of the yolk. Adult fish exhibited hypoxia before death due to multiple damages induced by LMWCS. Although the toxicity of LMWCS was revealed in zebrafish model, the toxicity was only present in pH < 7 and easy be neutralized by other negative ions. Collectively, these data improved a new understanding of LMWCS properties.

Synthesis, Bioapplications, and Toxicity Evaluation of Chitosan-Based Nanoparticles

The development of advanced nanomaterials and technologies is essential in biomedical engineering to improve the quality of life. Chitosan-based nanomaterials are on the forefront and attract wide interest due to their versatile physicochemical characteristics such as biodegradability, biocompatibility, and non-toxicity, which play a promising role in biological applications. Chitosan and its derivatives are employed in several applications including pharmaceuticals and biomedical engineering. This article presents a comprehensive overview of recent advances in chitosan derivatives and nanoparticle synthesis, as well as emerging applications in medicine, tissue engineering, drug delivery, gene therapy, and cancer therapy. In addition to the applications, we critically review the main concerns and mitigation strategies related to chitosan bactericidal properties, toxicity/safety using tissue cultures and animal models, and also their potential environmental impact. At the end of this review, we also provide some of future directions and conclusions that are important for expanding the field of biomedical applications of the chitosan nanoparticles.

Confident performance of chitosan and pistachio shell biochar on reducing Ni bioavailability in soil and plant plus improved the soil enzymatic activities, antioxidant defense system and nutritional quality of lettuce

Nickel being a toxic heavy metal is considered as a hazardous pollutant in the soil environment. The cultivation of edible vegetables on Ni contaminated soil can deteriorate plant quality which causes critical health issues to humans and animals. Therefore, the remediation for such Ni polluted soils has currently become a great challenge for the researchers. Contrastingly, lowering bioavailability of Ni in those soils based on applying appropriate immobilizing amendments demonstrating a target to relieve virulence to plants can remarkably diminish the environmental hazard. In this experiment, biochar (BR) along diverse clays like bentonite (BE), cationic-zeolite (C-ZE), chitosan (CN) and attapulgite (AP) as individual doses at 2% each in a soil synthetically spiked with Ni (at 50 ppm) magnificently immobilize Ni and curtailed its bioavailability to lettuce (Lactuca sativa L.). In addition, the related influences of planned treatments on translocation of Ni to shoots and leaves, antioxidant preventive system over oxidative injury, biochemistry and nutritional ability of lettuce were monitored. Results suggested that the CN2% treatment performed excellently in terms of reducing Ni concentrations in leaves and roots of lettuce plants along bioavailable Ni in the soil after plant harvest. Surprisingly, the BR2% treatment efficiently promoted enzymatic activities in the soil and developed moisture content, photosynthesis, biomass, biochemistry, and nutrition (both micronutrients and macronutrients) and antioxidant preventive system while diminished Ni oxidative injury in lettuce plants over rest of the treatments. Finally, our results confirmed that individually applying CN at 2% in a Ni contaminated soil could significantly control Ni bioavailability, whereas, application of BR at 2% could remarkably develop aforementioned parameters in lettuce plants.

Hazard Assessment of Polymeric Nanobiomaterials for Drug Delivery: What Can We Learn From Literature So Far

The physicochemical properties of nanobiomaterials, such as their small size and high surface area ratio, make them attractive, novel drug-carriers, with increased cellular interaction and increased permeation through several biological barriers. However, these same properties hinder any extrapolation of knowledge from the toxicity of their raw material. Though, as suggested by the Safe-by-Design (SbD) concept, the hazard assessment should be the starting point for the formulation development. This may enable us to select the most promising candidates of polymeric nanobiomaterials for safe drug-delivery in an early phase of innovation. Nowadays the majority of reports on polymeric nanomaterials are focused in optimizing the nanocarrier features, such as size, physical stability and drug loading efficacy, and in performing preliminary cytocompatibility testing and proving effectiveness of the drug loaded formulation, using the most diverse cell lines. Toxicological studies exploring the biological effects of the polymeric nanomaterials, particularly regarding immune system interaction are often disregarded. The objective of this review is to illustrate what is known about the biological effects of polymeric nanomaterials and to see if trends in toxicity and general links between physicochemical properties of nanobiomaterials and their effects may be derived. For that, data on chitosan, polylactic acid (PLA), polyhydroxyalkanoate (PHA), poly(lactic-co-glycolic acid) (PLGA) and policaprolactone (PCL) nanomaterials will be evaluated regarding acute and repeated dose toxicity, inflammation, oxidative stress, genotoxicity, toxicity on reproduction and hemocompatibility. We further intend to identify the analytical and biological tests described in the literature used to assess polymeric nanomaterials toxicity, to evaluate and interpret the available results and to expose the obstacles and challenges related to the nanomaterial testing. At the present time, considering all the information collected, the hazard assessment and thus also the SbD of polymeric nanomaterials is still dependent on a case-by-case evaluation. The identified obstacles prevent the identification of toxicity trends and the generation of an assertive toxicity database. In the future, in vitro and in vivo harmonized toxicity studies using unloaded polymeric nanomaterials, extensively characterized regarding their intrinsic and extrinsic properties should allow to generate such database. Such a database would enable us to apply the SbD approach more efficiently.

The zebrafish embryotoxicity test (ZET) for nanotoxicity assessment: from morphological to molecular approach

Nanotechnology and use of nanomaterials (NMs) improve life quality, economic growth and environmental health. However, the increasing production and use of NMs in commercial products has led to concerns about their potential toxicity on human and environment health, as well as its toxicological classification and regulation. In this context, there is an urgent need to standardize and validate procedures for nanotoxicity testing. Since the zebrafish embryotoxicity test (ZET) has been indicated as a suitable approach for the toxicity assessment of traditional and emergent pollutants, the aim of this review is to summarize the existing literature on embryotoxic and teratogenic effects of NMs on zebrafish. In addition, morphological changes in zebrafish embryos induced by NMs were classified in four reaction models, allowing classification of the mode of action and toxicity of different types of NM. Revised data showed that the interaction and bioaccumulation of NMs on zebrafish embryos were associated to several toxic effects, while the detoxification process was limited. In general, NMs induced delayed hatching, circulatory changes, pigmentation and tegumentary alterations, musculoskeletal disorders and yolk sac alterations on zebrafish embryos. Recommendations for nanotoxicological tests are given, including guidance for future research. This review reinforces the use of the ZET as a suitable approach to assess the health risks of NM exposure.

Nanomaterials meet zebrafish: Toxicity evaluation and drug delivery applications

With the rapid development of engineered nanomaterials for various applications, in vivo toxicological studies for evaluating the potential hazardous effects of nanomaterials on environmental and human safety are in urgent need. Zebrafish has long been considered as the "gold standard" for biosafety assessments of chemicals and pollutants due to its high fecundity, cost-effectiveness, well-characterized developmental stages, optical transparency, and so forth. Thus, zebrafish holds great potential for high-throughput nanotoxicity screening. In this review, we summarize the in vivo toxicological profiles of different nanomaterials, including Ag nanoparticles (NPs), CuO NPs, silica NPs, polymeric NPs, quantum dots, nanoscale metal-organic frameworks, etc, in zebrafish and focus on how the physicochemical properties (e.g., size, surface charge, and surface chemistry) of these nanomaterials influence their biosafety. In addition, we also report the recent advances of the in vivo delivery of nanopharmaceuticals using zebrafish as the model organism for therapeutic assessment, biodistribution tracking, and the controlled release of loaded drugs. Limitations and special considerations of zebrafish model are also discussed. Overall, zebrafish is expected to serve as a high-throughput screening platform for nanotoxicity and drug delivery assessment, which may instruct the design of safe nanomaterials and more effective nanomedicines.

Recent progress in biomedical applications of chitosan and its nanocomposites in aquaculture: A review

Chitosan nanoparticles (CSNPs) are the nanostructures of chitosan biopolymer which is derived from chitin polysaccharide, the main component of crustacean shells. Chitosan is a biocompatible, nontoxic and biodegradable polymer soluble in acidic solutions and easily excreted from kidneys. It is widely used in medical and pharmaceutical applications including artificial matrices for tissue engineering, drug transport, targeted drug delivery and protein or gene delivery. The antimicrobial activities of chitosan and CSNPS against different bacterial, fungal and viral pathogens made them valuable for several biological applications including food preservation purposes. In addition, they have immunomodulatory effects on fish and crustaceans providing direct positive impact on aquaculture and fish farming industry. Sustained release of some bioactive ingredients such as hormones, vitamins, nutrients and antioxidants has improved the biological activities of fish. Furthermore, CSNPs have recently been employed to diagnose fish diseases. In this review, we present the medical and biological applications of chitosan and CSNPs on aquatics to provide an update on recent advances and the potential for further advanced applications for aquaculture in the future.

The size and composition of polymeric nanocapsules dictate their interaction with macrophages and biodistribution in zebrafish

Macrophages are pivotal cells of the innate immune system specialized in the phagocytosis of foreign elements. Nanoparticles intentionally designed to target macrophages and modulate their response are of especial interest in the case of chronic inflammatory diseases, cancer and for vaccine development. This work aimed to understand the role of size and shell composition of polymeric nanocapsules (NCs) in their interaction with macrophages, both in vitro and in vivo. A systematic study was performed using two different sizes of inulin and chitosan NCs, negatively and positively charged, respectively, small (≈ 70 nm) and medium (170-250 nm). The in vitro results showed that small NCs interacted more efficiently with macrophages than their larger counterparts. Inulin NCs were significantly less toxic than chitosan NCs. Finally, following in vivo administration (intravenous/intramuscular) to zebrafish, small NCs, regardless of their composition, disseminated considerably faster and further than their medium size counterparts. These results emphasize how small changes in the nanometric range can lead to a remarkably different interaction with the immune cells and biodistribution profile.

Acute exposure to ustiloxin A affects growth and development of early life zebrafish, Danio rerio

Ustiloxin A is a cyclopeptide mycotoxin originally isolated from rice false smut balls (FSBs) that formed in rice spikelets infected by the fungal pathogen Ustilaginoidea virens. Studies have shown that ustiloxin A was toxic to animals, but the toxicological evidence is still lacking. To reveal the negative influence of ustiloxin A on model organism, zebrafish were selected and exposed to ustiloxin A at concentrations of 0, 0.25, 2.5 or 25 μM from 2 h post-fertilization (hpf) to 144 hpf. The hatching rates of embryos in the 25 μM exposure group was 12.85% less than the control group at 96 hpf. Meanwhile, exposure to 0.25, 2.5 or 25 μM ustiloxin A resulted in a distinct dose-dependent increase in mortality rate of embryos at 96 hpf. We also found that exposed to ustiloxin A could cause some other damages on zebrafish larvae, such as growth delay and increased heart rate. In addition, the athletic behavior of zebrafish larvae exposed to ustiloxin A at 25 μM was dramatically different with that of control. Transcriptome sequencing showed that abundances of 339 transcripts (125 up-regulated and 214 down-regulated) were significantly altered in larvae exposed to 25 μM of ustiloxin A. Several of the crucial genes were validated by RT-qPCR. This is the first report on the toxicologic study of ustiloxins against model organism zebrafish. Results suggested that ustiloxins have become a potential danger for food security.

Impaired Liver Size and Compromised Neurobehavioral Activity are Elicited by Chitosan Nanoparticles in the Zebrafish Embryo Model

The use of chitosan nanoparticles (ChNPs) in various biological and environmental applications is attracting great interest. However, potential side effects related to ChNP toxicity remain the major limitation hampering their wide application. For the first time, we investigate the potential organ-specific (cardiac, hepatic, and neuromuscular) toxicity of ChNPs (size 100–150 nm) using the zebrafish embryo model. Our data highlight the absence of both acute and teratogenic toxic effects of ChNPs (~100% survival rate) even at the higher concentration employed (200 mg/L). Although no single sign of cardiotoxicity was observed upon exposure to 200 mg/L of ChNPs, as judged by heartbeat rate, the corrected QT interval (QTc, which measures the time between the start of the Q wave and the end of the T wave in the heart's electrical cycle), maximum cardiac arrest, and ejection fraction assays, the same dosage elicited the impairment of both liver size (decreased liver size, but without steatosis and lipid yolk retention) and neurobehavioral activity (increased movement under different light conditions). Although the observed toxic effect failed to affect embryo survival, whether a prolonged ChNP treatment may induce other potentially harmful effects remains to be elucidated. By reporting new insights on their organ-specific toxicity, our results add novel and useful information into the available data concerning the in vivo effect of ChNPs.

Promoting the productivity and quality of brinjal aligned with heavy metals immobilization in a wastewater irrigated heavy metal polluted soil with biochar and chitosan

Depleting aquifers, lack of planning and low socioeconomic status of Pakistani farmers have led them to use wastewater (WW) for irrigating their crops causing food contamination with heavy metals and ultimately negative effects on human health. This study evaluates the effects of chitosan (CH) and biochar (BC) on growth and nutritional quality of brinjal plant together with in situ immobilization of heavy metals in a soil polluted with heavy metals due to irrigation with wastewater (SPHIW) and further irrigated with the same WW. Both CH and BC were applied at three different rates i.e. low rate [(LR), BC0.5%, CH0.5% and BC0.25%+CH0.25%], medium rate [(MR), BC1%, CH1% and BC0.5%+CH0.5%] and high rate [(HR), BC1.5%, CH1.5% and BC0.75%+CH0.75%]. Result revealed that brinjal growth, antioxidant enzymes, and fruit nutritional quality significantly improved from LR to HR for each amendment, relative to control. However, these results were more prominent with BC alone and BC+CH, compared with CH alone at each rate. Similarly, with few exceptions, significant reduction in Ni, Cd, Co, Cr and Pb concentrations in the root, shoot and fruit were found in sole CH treatment both at LR and MR but in both CH and BC+CH treatments at HR, relative to control. Interestingly, the concentrations of Fe in the roots, shoots and fruit were more pronounced at BC treatments relative to CH and BC+CH treatments at each rate, compared to control. Overall, the BC+CH treatment at HR was the most effective treatment for in situ immobilization of heavy metals in SPHIW and further irrigated with the same WW, compared to rest of the treatments. This study indicates that BC0.75%+CH0.75% treatment can be used to reduce mobility and bioavailability of heavy metals in SPHIW and facilitates plant growth by improving the antioxidant system. However, the feasibility of BC0.75%+CH0.75% treatment should also be tested at the field scale.

Zebrafish as a Model to Evaluate Nanoparticle Toxicity

Nanoparticles are increasingly being developed for in vivo use, from targeted drug delivery to diagnostics, where they have enormous potential, while they are also being used for a variety of applications that can result in environmental exposure for humans. Understanding how specific nanoparticles interact with cells and cell systems is essential to gauge their safety with respect to either clinical or environmental exposure. Zebrafish is being increasingly employed as a model to evaluate nanoparticle biocompatibility. This review describes this model and how it can be used to assess nanoparticle toxicity at multiple levels, including mortality, teratogenicity, immunotoxicity, genotoxicity, as well as alterations in reproduction, behavior and a range of other physiological readouts. This review also provides an overview of studies using this model to assess the toxicity of metal, metal oxide and carbon-based nanoparticles. It is anticipated that this information will inform research aimed at developing biocompatible nanoparticles for a range of uses.

Enhancing the fathead minnow fish embryo toxicity test: Optimizing embryo production and assessing the utility of additional test endpoints

The fathead minnow fish embryo toxicity (FET) test has been identified as a potential alternative to toxicity test methods that utilize older fish. However, several challenges have been identified with the fathead minnow FET test, including: 1) difficulties in obtaining appropriately-staged embryos for FET test initiation, 2) a paucity of data comparing fathead minnow FET test performance to the fathead minnow larval growth and survival (LGS) test and 3) a lack of sublethal endpoints that could be used to estimate chronic toxicity and/or predict adverse effects. These challenges were addressed through three study objectives. The first objective was to optimize embryo production by assessing the effect of breeding group composition (number of males and females) on egg production. Results showed that groups containing one male and four females produced the largest clutches, enhancing the likelihood of procuring sufficient numbers of embryos for FET test initiation. The second study objective was to compare the performance of the FET test to that of the fathead minnow LGS test using three reference toxicants. The FET and LGS tests were similar in their ability to predict the acute toxicity of sodium chloride and ethanol, but the FET test was found to be more sensitive than the LGS test for sodium dodecyl sulfate. The last objective of the study was to evaluate the utility and practicality of several sublethal metrics (i.e., growth, developmental abnormalities and growth- and stress-related gene expression) as FET test endpoints. Developmental abnormalities, including pericardial edema and hatch success, were found to offer the most promise as additional FET test endpoints, given their responsiveness, potential for predicting adverse effects, ease of assessment and low cost of measurement.

Oocyte exposure to ZnO nanoparticles inhibits early embryonic development through the γ-H2AX and NF-κB signaling pathways

The impacts of zinc oxide nanoparticles on embryonic development following oocyte stage exposure are unknown and the underlying mechanisms are sparsely understood. In the current investigation, intact nanoparticles were detected in ovarian tissue in vivo and cultured cells in vitro under zinc oxide nanoparticles treatment. Zinc oxide nanoparticles exposure during the oocyte stage inhibited embryonic development. Notably, in vitro culture data closely matched in vivo embryonic data, in that the impairments caused by Zinc oxide nanoparticles treatment passed through cell generations; and both gamma-H2AX and NF-kappaB pathways were involved in zinc oxide nanoparticles caused embryo-toxicity. Copper oxide and silicon dioxide nanoparticles have been used to confirm that particles are important for the toxicity of zinc oxide nanoparticles. The toxic effects of zinc oxide nanoparticles emanate from both intact nanoparticles and Zn²⁺. Our investigation along with others suggests that zinc oxide nanoparticles are toxic to the female reproductive system [ovaries (oocytes)] and subsequently embryo-toxic and that precaution should be taken regarding human exposure to their everyday use.

Thermo/pH dual-responsive core–shell particles for apatinib/doxorubicin controlled release: preparation, characterization and biodistribution

Schematic representation of the structure and functioning mechanism of DD particles.

Zinc-Modified Nanotransporter of Doxorubicin for Targeted Prostate Cancer Delivery

This work investigated the preparation of chitosan nanoparticles used as carriers for doxorubicin for targeted cancer delivery. Prepared nanocarriers were stabilized and functionalized via zinc ions incorporated into the chitosan nanoparticle backbone. We took the advantage of high expression of sarcosine in the prostate cancer cells. The prostate cancer targeting was mediated by the AntiSar antibodies decorated surface of the nanocage. Formation of the chitosan nanoparticles was determined using a ninhydrin assay and differential pulse voltammetry. Obtained results showed the strong effect of tripolyphosphine on the nanoparticle formation. The zinc ions affected strong chitosan backbone coiling both in inner and outer chitosan nanoparticle structure. Zinc electrochemical signal depended on the level of the complex formation and the potential shift from -960 to -950 mV. Formed complex is suitable for doxorubicin delivery. It was observed the 20% entrapment efficiency of doxorubicin and strong dependence of drug release after 120 min in the blood environment. The functionality of the designed nanotransporter was proven. The purposed determination showed linear dependence in the concentration range of Anti-sarcosine IgG labeled gold nanoparticles from 0 to 1000 µg/mL and the regression equation was found to be y = 3.8x - 66.7 and R² = 0.99. Performed ELISA confirmed the ability of Anti-sarcosine IgG labeled chitosan nanoparticles with loaded doxorubicin to bind to the sarcosine molecule. Observed hemolytic activity of the nanotransporter was 40%. Inhibition activity of our proposed nanotransporter was evaluated to be 0% on the experimental model of S. cerevisiae. Anti-sarcosine IgG labeled chitosan nanoparticles, with loaded doxorubicin stabilized by Zn ions, are a perspective type of nanocarrier for targeted drug therapy managed by specific interaction with sarcosine and metallothionein for prostate cancer.

Relation between biophysical properties of nanostructures and their toxicity on zebrafish

In recent years, the use of commercial nanoparticles in different industry and health fields has increased exponentially. However, the uncontrolled application of nanoparticles might present a potential risk to the environment and health. Toxicity of these nanoparticles is usually evaluated by a fast screening assay in zebrafish (Danio rerio). The use of this vertebrate animal model has grown due to its small size, great adaptability, high fertilization rate and fast external development of transparent embryos. In this review, we describe the toxicity of different micro- and nanoparticles (carbon nanotubes, dendrimers, emulsions, liposomes, metal nanoparticles, and solid lipid nanoparticles) associated to their biophysical properties using this model. The main biophysical properties studied are size, charge and surface potential due to their impact on the environment and health effects. The review also discusses the correlation of the effects of the different nanoparticles on zebrafish. Special focus is made on morphological abnormalities, altered development and abnormal behavior. The last part of the review debates changes that should be made in future directions in order to improve the use of the zebrafish model to assess nanotoxicity.