Characterization of xanthan gum produced from glycerol by a mutant strain Xanthomonas campestris CCTCC M2015714

A novel coupled fermentation system for low-molecular-weight xanthan gum with diverse biological activities

Xanthan gum (XG) is a bacterial exopolysaccharide widely used in various industries due to its stability and rheological properties. Low-molecular-weight xanthan gum (LXG) exhibits enhanced properties and broader applications, but current degradation methods are limited. This study introduces an innovative coupled fermentation system for the efficient production of LXG. Endo-xanthanase from Microbacterium sp. XT11 was expressed in Pichia pastoris GS115, exhibiting optimal activity at pH 6.0 and 40 °C, with broad pH tolerance. The optimized coupled fermentation system used bean sprouts juice as nitrogen source, the inoculation quantity of X. campestris: P. pastoris was 1: 3, and the pH was controlled at 6.0. In the bioreactor, the total sugar concentration reached 12.12 g/L, the reducing sugar concentration reached 5.32 g/L, and the endo-xanthanase activity increased to 1150.26 U/L, which were 2.13, 2.3, and 3.71 times higher than those at the shake flask level, respectively. The prepared LXG had a molecular weight of 1093 Da and a monosaccharide ratio of 2.0:1.57:0.89 (glucose, mannose, and glucuronic acid). Bioactivity analysis revealed its antioxidant and prebiotic properties, promoting the growth of beneficial intestinal microbiota and metabolite production. This suggests the potential of LXG as a functional ingredient in intestinal health-focused foods and supplements.

Glycerol-driven adaptive evolution for the production of low-molecular-weight Welan gum: Characterization and activity evaluation

Through adaptive laboratory evolution (ALE) of Sphingomonas sp. ATCC 31555, fermentation for production of low-molecular-weight welan gum (LMW-WG) was performed using glycerol as sole carbon source. During ALE, GPC-MALS analysis revealed a gradual decrease in WG molecular weight with the increase of adaptation cycles, accompanied by changes in solution conformation. LMW-WG was purified and structurally analyzed using GPC-MALS, monosaccharide composition analysis, infrared spectroscopy, NMR analysis, atomic force microscopy, and scanning electron microscopy. Subsequently, LMW-WG obtains hydration, transparency, antioxidant activity, and rheological properties. Finally, an in vitro simulation colon reactor was used to evaluate potential prebiotic properties of LMW-WG as dietary fiber. Compared with WG produced using sucrose as substrate, LMW-WG exhibited a fourfold reduction in molecular weight while maintaining moderate viscosity. Structurally, L-Rha nearly completely replaced L-Man. Furthermore, LMW-WG demonstrated excellent hydration, antioxidant activity, and high transparency. It also exhibited resistance to saliva and gastrointestinal digestion, showcasing a favorable colonization effect on Bifidobacterium, making it a promising symbiotic agent.

A structure-functionality insight into the bioactivity of microbial polysaccharides toward biomedical applications: A review

Microbial polysaccharides (MPs) are biopolymers secreted by microorganisms such as bacteria and fungi during their metabolic processes. Compared to polysaccharides derived from plants and animals, MPs have advantages such as wide sources, high production efficiency, and less susceptibility to natural environmental influences. The most attractive feature of MPs lies in their diverse biological activities, such as antioxidative, anti-tumor, antibacterial, and immunomodulatory activities, which have demonstrated immense potential for applications in functional foods, cosmetics, and biomedicine. These bioactivities are precisely regulated by their sophisticated molecular structure. However, the mechanisms underlying this precise regulation are not yet fully understood and continue to evolve. This article presents a comprehensive review of the most representative species of MPs, including their fermentation and purification processes and their biomedical applications in recent years. In particular, this work presents an in-depth analysis into the structure-activity relationships of MPs across multiple molecular levels. Additionally, this review discusses the challenges and prospects of investigating the structure-activity relationships, providing valuable insights into the broad and high-value utilization of MPs.

Review on emerging trends and challenges in the modification of xanthan gum for various applications

This review explores the realm of structural modifications and broad spectrum of their potential applications, with a special focus on the synthesis of xanthan gum derivatives through graft copolymerization methods. It delves into the creation of these derivatives by attaching functional groups (-OH and -COOH) to xanthan gum, utilizing a variety of initiators for grafting, and examining their diverse applications, especially in the areas of food packaging, pharmaceuticals, wastewater treatment, and antimicrobial activities. Xanthan gum is a biocompatible, biodegradable, less toxic, bioactive, and cost-effective natural polymer derived from Xanthomonas species. The native properties of xanthan gum can be improved by cross-linking, grafting, curing, blending, and various modification techniques. Grafted xanthan gum has excellent biodegradability, metal binding, dye adsorption, immunological properties, and wound healing ability. Owing to its remarkable properties, such as biocompatibility and its ability to form gels resembling the extracellular matrix of tissues, modified xanthan gum finds extensive utility across biomedicine, engineering, and the food industry. Furthermore, the review also covers various modified derivatives of xanthan gum that exhibit excellent biodegradability, metal binding, dye adsorption, immunological properties, and wound healing abilities. These applications could serve as important resources for a wide range of industries in future product development.

Characterization of Chilean hot spring-origin Staphylococcus sp. BSP3 produced exopolysaccharide as biological additive

A type of high molecular weight bioactive polymers called exopolysaccharides (EPS) are produced by thermophiles, the extremophilic microbes that thrive in acidic environmental conditions of hot springs with excessively warm temperatures. Over time, EPS became important as natural biotechnological additives because of their noncytotoxic, emulsifying, antioxidant, or immunostimulant activities. In this article, we unravelled a new EPS produced by Staphylococcus sp. BSP3 from an acidic (pH 6.03) San Pedro hot spring (38.1 °C) located in the central Andean mountains in Chile. Several physicochemical techniques were performed to characterize the EPS structure including Scanning electron microscopy-energy dispersive X-ray spectroscopy (SEM-EDS), Atomic Force Microscopy (AFM), High-Performance Liquid Chromatography (HPLC), Gel permeation chromatography (GPC), Fourier Transform Infrared Spectroscopy (FTIR), 1D Nuclear Magnetic Resonance (NMR), and Thermogravimetric analysis (TGA). It was confirmed that the amorphous surface of the BSP3 EPS, composed of rough pillar-like nanostructures, is evenly distributed. The main EPS monosaccharide constituents were mannose (72%), glucose (24%) and galactose (4%). Also, it is a medium molecular weight (43.7 kDa) heteropolysaccharide. NMR spectroscopy demonstrated the presence of a [→ 6)-⍺-D-Manp-(1 → 6)-⍺-D-Manp-(1 →] backbone 2-O substituted with 1-⍺-D-Manp. A high thermal stability of EPS (287 °C) was confirmed by TGA analysis. Emulsification, antioxidant, flocculation, water-holding (WHC), and oil-holding (OHC) capacities are   also studied for biotechnological industry applications. The results demonstrated that BSP3 EPS could be used as a biodegradable material for different purposes, like flocculation and natural additives in product formulation.

Production of Bacterial Exopolysaccharides: Xanthan and Bacterial Cellulose

Recently, degradable biopolymers have become increasingly important as potential environmentally friendly biomaterials, providing a wide range of applications in various fields. Bacterial exopolysaccharides (EPSs) are biomacromolecules, which due to their unique properties have found applications in biomedicine, foodstuff, textiles, cosmetics, petroleum, pharmaceuticals, nanoelectronics, and environmental remediation. One of the important commercial polysaccharides produced on an industrial scale is xanthan. In recent years, the range of its application has expanded significantly. Bacterial cellulose (BC) is another unique EPS with a rapidly increasing range of applications. Due to the great prospects for their practical application, the development of their highly efficient production remains an important task. The present review summarizes the strategies for the cost-effective production of such important biomacromolecules as xanthan and BC and demonstrates for the first time common approaches to their efficient production and to obtaining new functional materials for a wide range of applications, including wound healing, drug delivery, tissue engineering, environmental remediation, nanoelectronics, and 3D bioprinting. In the end, we discuss present limitations of xanthan and BC production and the line of future research.

Structural, rheological and functional properties of ultrasonic treated xanthan gums

Xanthan gum can improve the freeze-thaw stability of frozen foods. However, the high viscosity and long hydration time of xanthan gum limits its application. In this study, ultrasound was employed to reduce the viscosity of xanthan gum, and the effect of ultrasound on its physicochemical, structural, and rheological properties was investigated using High-performance size-exclusion chromatography (HPSEC), ion chromatograph, methylation analysis, 1H NMR, rheometer, etc.. The application of ultrasonic-treated xanthan gum was evaluated in frozen dough bread. Results showed that the molecular weight of xanthan gum was reduced significantly by ultrasonication (from 3.0 × 107 Da to 1.4 × 106 Da), and the monosaccharide compositions and linkage patterns of sugar residues were altered. Results revealed that ultrasonication treatment mainly broke the molecular backbone at a lower intensity, then mainly broke the side chains with increasing intensity, which significantly reduced the apparent viscosity and viscoelastic properties of xanthan gum. The results of specific volume and hardness showed that the bread containing low molecular weight xanthan gum was of better quality. Overall, this work offers a theoretical foundation for broadening the application of xanthan gum and improving its performance in frozen dough.

Microbial exopolysaccharides in the biomedical and pharmaceutical industries

The most significant and renewable class of polymeric materials are extracellular exopolysaccharides (EPSs) produced by microorganisms. Because of their diverse chemical and structural makeup, EPSs play a variety of functions in a variety of industries, including the agricultural industry, dairy industry, biofilms, cosmetics, and others, demonstrating their biotechnological significance. EPSs are typically utilized in high-value applications, and current research has focused heavily on them because of their biocompatibility, biodegradability, and compatibility with both people and the environment. Due to their high production costs, only a few microbial EPSs have been commercially successful. The emergence of financial barriers and the growing significance of microbial EPSs in industrial and medical biotechnology has increased interest in exopolysaccharides. Since exopolysaccharides can be altered in a variety of ways, their use is expected to increase across a wide range of industries in the coming years. This review introduces some significant EPSs and their composites while concentrating on their biomedical uses.

Traversing the diverse avenues of exopolysaccharides-based nanocarriers in the management of cancer

Exopolysaccharides are unique polymers generated by living organisms such as algae, fungi and bacteria to protect them from environmental factors. After a fermentative process, these polymers are extracted from the medium culture. Exopolysaccharides have been explored for their anti-viral, anti-bacterial, anti-tumor, and immunomodulatory effects. Specifically, they have acquired massive attention in novel drug delivery strategies owing to their indispensable properties like biocompatibility, biodegradability, and lack of irritation. Exopolysaccharides such as dextran, alginate, hyaluronic acid, pullulan, xanthan gum, gellan gum, levan, curdlan, cellulose, chitosan, mauran, and schizophyllan exhibited excellent drug carrier properties. Specific exopolysaccharides, such as levan, chitosan, and curdlan, have demonstrated significant antitumor activity. Moreover, chitosan, hyaluronic acid and pullulan can be employed as targeting ligands decorated on nanoplatforms for effective active tumor targeting. This review shields light on the classification, unique characteristics, antitumor activities and nanocarrier properties of exopolysaccharides. In addition, in vitro human cell line experiments and preclinical studies associated with exopolysaccharide-based nanocarriers have also been highlighted.

Structure-property relationship in the evaluation of xanthan gum functionality for oral suspensions and tablets

The functional properties of xanthan gum (XG) in pharmaceutical preparations depend on its rheological properties, which inevitably rely on its molecular structure. Hence, this work investigated the relationship between the molecular structure of XG and its rheological properties and functional characteristics, and revealed the structural factors influencing the XG functionalities in oral suspensions and matrix tablets. Primarily, the molecular structures of four commercial XG products were characterized by infrared spectroscopy, differential scanning calorimetry and measuring the monosaccharide composition, average molecular weight, and pyruvate and acetyl contents. Furthermore, the flow behavior and viscoelasticity of XG solutions, the viscoelasticity of XG hydrogels, and XG combinations (XGC, aqueous solution containing XG, liquid glucose, and glycerin) were investigated. Finally, the dissolution time of XGC and the swelling and erosion properties of the XG matrix were studied to evaluate XG functionality in oral suspensions and matrix tablets, respectively. Results showed that the polydispersity of molecular weight and the pyruvate content affected the functionality and performance of XG in suspension and tablet forms. The higher polydispersity and pyruvate content of XG improved the hydrogel strength, which led to a longer dissolution time of XGC and a higher swelling extent of the XG matrix but a slower erosion rate.

Study on the impact of temperature, salts, sugars and pH on dilute solution properties of Lepidium perfoliatum seed gum

The functional properties of food gums are remarkably affected by the quality of solvent/cosolutes and temperature in a food system. In this work, for the first time, the chemical characterizations and dilute solution properties of Lepidium perfoliatum seed gum (LPSG), as an emerging carbohydrate polymer, were investigated. It was found that xylose (14.27%), galacturonic acid (10.70%), arabinose (9.07%) and galactose (8.80%) were the main monosaccharaide components in the LPSG samples. The uronic acid content of LPSG samples was obtained to be 14.83%. The average molecular weight and polydispersity index of LPSG were to be 2.34 × 105 g/mol and 3.3, respectively. As the temperature was increased and the pH was decreased and the concentration of cosolutes (Na+, Ca2+, sucrose and lactose) presented in the LPSG solutions was enhanced, the intrinsic viscosity [η] and coil dimension (R coil , V coil , υ s ) of LPSG molecular chains decreased. Activation energy and chain flexibility of LPSG were estimated to be 0.46 × 107 J/kg.mol and 553.08 K, respectively. The relative stiffness parameter (B) of LPSG in the presence of Ca2+ (0.079) was more than that of Na+ (0.032). Incorporation of LPSG into deionized water (0.2%, w/v) diminished the surface activity from 76.75 mN/m to 75.70 mN/m. Zeta potential (ζ) values (-46.85 mV--19.63 mV) demonstrated that dilute solutions of LPSG had strong anionic nature in the pH range of 3-11. The molecular conformation of LPSG was random coil in all the selected solution conditions. It can be concluded that temperature and presence of cosolutes can significantly influence on the LPSG properties in the dilute systems.

Evidence from Thermal Aging Indicating That the Synergistic Effect of Glyoxal and Sodium Sulfite Improved the Thermal Stability of Conformational Modified Xanthan Gum

Xanthan gum is prone to thermal oxidative degradation, which limits its applications. However, conformational changes in xanthan gum and appropriate stabilizers may improve its thermal stability. Therefore, in this study, we aimed to establish a strategy to maintain the viscosity of xanthan gum during long-term storage at high temperatures. We modified the original strain used for xanthan gum production by genetic engineering and added stabilizers during the production process. The structure and thermal stability of the resulting xanthan gum samples were then determined. Pyruvyl deficiency, combined with the addition of sodium sulfite and glyoxal during the production process, was found to significantly improve the maintenance of viscosity. The apparent viscosity of the new xanthan gum solution remained above 100 mPa·s after being stored at 90 °C for 48 days. Fourier-transform infrared spectra and scanning electron microscopy images showed that pyruvate-free xanthan gum with added stabilizers had more extensive cross-linking than natural xanthan gum. In conclusion, these findings may contribute to the use of xanthan gum in applications that require high temperatures for a long period of time.

Zwitterionic polymer modified xanthan gum with collagen II-binding capability for lubrication improvement and ROS scavenging

High friction of damaged cartilage requires long-acting lubricated additive, which can also effectively scavenge reactive oxidative species (ROS) produced by mechanically stimulated chondrocytes. In this study, xanthan gum (XG) was grafted by poly (sulfobetaine methacrylate) (PSBMA) (the [XG]/[SBMA] molar ratio is 1:5 or 1:10), forming nanoparticles and then conjugated with collagen II-binding peptide, finally obtaining CBPXGSB1/5 or CBPXGSB1/10. Therein, the CBPXGSB1/5 was chosen as optimal lubricated additive. The results show that hydrated effect of PSBMA side chains endows CBPXGSB1/5 with favorable lubrication property (COF is 0.063). Furthermore, the CBPXGSB1/5 combining lubrication property and specific binding capability together may achieve the long-acting lubrication for injured cartilage in medical field. The CBPXGSB1/5 also possesses antioxidation verified by DPPH assay and exhibits synergistically enhanced ROS (OH, O₂^- and H₂O₂) scavenging. Besides, cytotoxicity experiment demonstrates that CBPXGSB1/5 has good biocompatibility. Therefore, multifunctional CBPXGSB1/5 developed here may have promising application potential in osteoarthritis treatment.

Food Xanthan Polysaccharide Sulfation Process with Sulfamic Acid

Xanthan is an important polysaccharide with many beneficial properties. Sulfated xanthan derivatives have anticoagulant and antithrombotic activity. This work proposes a new method for the synthesis of xanthan sulfates using sulfamic acid. Various N-substituted ureas have been investigated as process activators. It was found that urea has the greatest activating ability. BBD of xanthan sulfation process with sulfamic acid in 1,4-dioxane has been carried out. It was shown that the optimal conditions for the sulfation of xanthan (13.1 wt% sulfur content) are: the amount of sulfating complex per 1 g of xanthan is 3.5 mmol, temperature 90 °C, duration 2.3 h. Sulfated xanthan with the maximum sulfur content was analyzed by physicochemical methods. Thus, in the FTIR spectrum of xanthan sulfate, in comparison with the initial xanthanum, absorption bands appear at 1247 cm-1, which corresponds to the vibrations of the sulfate group. It was shown by GPC chromatography that the starting xanthan gum has a bimodal molecular weight distribution of particles, including a high molecular weight fraction with Mw > 1000 kDa and an LMW fraction with Mw < 600 kDa. It was found that the Mw of sulfated xanthan gum has a lower value (~612 kDa) in comparison with the original xanthan gum, and a narrower molecular weight distribution and is characterized by lower PD values. It was shown by thermal analysis that the main decomposition of xanthan sulfate, in contrast to the initial xanthan, occurs in two stages. The DTG curve has two pronounced peaks, with maxima at 226 and 286 °C.

Semi-continuous production of xanthan in biofilm reactor using Xanthomonas campestris

Semi-continuous production of xanthan gum using self-immobilized Xanthomonas campestris cells in biofilm reactors was studied. Fermentation was carried out using two different designs of biofilm reactor equipped with a) stainless-steel support (SSS) and b) polyethylene support (PES). Fermentation was performed in three cycles with refreshing the media at the beginning of each: cycle 1, 0-27 h; cycle 2, 27-54 h; and cycle 3, 54-78.5 h. Results showed that the glucose consumption and the pH reduction in the PES biofilm reactor was faster compared to the SSS biofilm reactor. Scanning electron microscopy showed that the SSS was capable to immobilize more cells during the growth of X. campestris. The maximum concentration of xanthan gum in the SSS biofilm reactor obtained after 27 h (3.47 ± 0.71 g/L), while the maximum concentration of xanthan in the PES biofilm reactor obtained after 78.5 h (3.21 ± 0.68 g/L). Thermal stability analysis of xanthan using differential scanning calorimetry showed the presence of two fractures attributed to dehydration and degradation of polymer. The thermogram represented both endothermal and exothermal behaviour of xanthan polymer. Furthermore, the functional groups and molecular structure of the xanthan produced in this study was evaluated using Fourier transform infrared spectrometry and also proton nuclear magnetic resonance. in addition, the surface tension of (0.2 %, w/v) xanthan gum solution was in a range of 52.16-56.5 mN/m. Rheological analysis of xanthan showed that the G' values were higher than the G″ in all frequencies demonstrating a relatively high elasticity of the produced xanthan gum.

Bio-synthesis of food additives and colorants-a growing trend in future food

Food additives and colorants are extensively used in the food industry to improve food quality and safety during processing, storage and packing. Sourcing of these molecules is predominately through three means: extraction from natural sources, chemical synthesis, and bio-production, with the first two being the most utilized. However, growing demands for sustainability, safety and "natural" products have renewed interest in using bio-based production methods. Likewise, the move to more cultured foods and meat alternatives requires the production of new additives and colorants. The production of bio-based food additives and colorants is an interdisciplinary research endeavor and represents a growing trend in future food. To highlight the potential of microbial hosts for food additive and colorant production, we focus on current advances for example molecules based on their utilization stage and bio-production yield as follows: (I) approved and industrially produced with high titers; (II) approved and produced with decent titers (in the g/L range), but requiring further engineering to reduce production costs; (III) approved and produced with very early stage titers (in the mg/L range); and (IV) new/potential candidates that have not been approved but can be sourced through microbes. Promising approaches, as well as current challenges and future directions will also be thoroughly discussed for the bioproduction of these food additives and colorants.

Development and In Vitro/Ex Vivo Characterization of Vaginal Mucoadhesive Bilayer Films Based on Ethylcellulose and Biopolymers for Vaginal Sustained Release of Tenofovir

Young women in sub-Saharan Africa have the highest risk of human immunodeficiency virus (HIV) acquisition through sexual contact of all groups. Vaginal controlled release of antiretrovirals is a priority option for the prevention of sexual transmission of the virus in women. In this manuscript, bilayer films were prepared based on ethylcellulose and a natural polymer (xanthan or tragacanth gum) plasticized with glycerol and tributylcitrate for tenofovir-controlled release. The mechanical properties and microstructure of the blank films were characterized by texture analysis, Fourier transform infrared spectroscopy, and scanning electron microscopy. The loaded films were evaluated in simulated vaginal fluid through release and swelling studies and ex vivo mucoadhesion assessments. The results show that the preparation method produced bilayer films with adequate mechanical properties. The contribution of both layers allowed the sustained release of tenofovir and a mucoadhesion time of up to 360 h. The toxicity of the materials was evaluated in three cell lines of vaginal origin. The films constituted by ethylcellulose and xanthan gum in a 2:1 proportion (EX2-D) showed the longest mucoadhesion time, with 15 days of tenofovir-controlled release, zero toxicity, and optimal mechanical properties. These films are therefore a promising option for offering women a means of self-protection against the sexual transmission of HIV.

Characterization and Antioxidant Activity of a Low-Molecular-Weight Xanthan Gum

In the present work, a low-molecular-weight xanthan gum (LW-XG) was successfully obtained via biodegradation of commercial xanthan by the endophytic fungus Chaetomium globosum CGMCC 6882. The monosaccharide composition of LW-XG was glucose, mannose, and glucuronic acid in a molar ratio of 1.63:1.5:1.0. The molecular weight of LW-XG was 4.07 × 10⁴ Da and much smaller than that of commercial xanthan (2.95 × 10⁶ Da). Antioxidant assays showed that LW-XG had a good scavenging ability on DPPH radicals, superoxide anions, and hydroxyl radicals and good ferric reducing power. Moreover, LW-XG exhibited excellent protective effect on H₂O₂-injured Caco-2 cells. Results of this work suggested that LW-XG could be used in foods or pharmaceuticals to alleviate and resist the oxidative damage induced by the overproduction of reactive oxygen species.

Eminence of Microbial Products in Cosmetic Industry

Cosmetology is the developing branch of science, having direct impact on the society. The cosmetic sector is interested in finding novel biological alternatives which can enhance the product attributes as well as it can substitute chemical compounds. Many of the compounds are having biological origin and are acquire from bacteria, fungi, and algae. A range of biological compounds, like bio-surfactant, vitamins, antioxidants, pigments, enzymes, peptides have promising features and beneficial properties. Moreover, these products can be produced commercially with ease. The review will encompass the importance and use of microbial compounds for new cosmetic formulations as well as products associated with it.

Simultaneous production of polyhydroxyalkanoate and xanthan gum: From axenic to mixed cultivation

In the present study, mixed and axenic submerged cultures of Cupriavidus necator and Xanthomonas campestris were performed for simultaneous and individual PHA and XG productions using palm oil (Elaeis guineensis) as substrate. Rotational Central Compound Design (RCCD) was successfully used in the optimization of individual productions of PHA (3.39 g L^-1, Mw = 692.6 kDa) and XG (1.77 g L^-1, Mw = 36.6 × 10⁵ kDa). Novel simultaneous production of PHA (6.43 g L^-1, Mw = 629.2 kDa) and XG (1.98 g L^-1, Mw = 25.0 × 10⁵ kDa), executed in bacterial co-cultivation, revealed to be a successful strategy to increment polymer synthesis, especially PHA. XG bioconversions followed a general trend of lower production in co-culture. Culture configurations also altered polymers properties and characteristics.

Biosynthesis, structure and antioxidant activities of xanthan gum from Xanthomonas campestris with additional furfural

Lignocellulosic-like materials are potentially low-cost fermentation substrates, but their pretreatment brings about by-products. This work investigated the effects of furfural on xanthan gum (XG) production, and product quality was evaluated by structure, viscosity and antioxidant capacities. Xanthomonas campestris maintained steady polysaccharide yield (above 13 g·L^-1) with enhanced cell growth at low furfural concentrations (below 3.2 g·L^-1). The products were verified as XG by FT-IR, XRD, NMR and monosaccharide analysis. Moreover, they were found to have reduced acetyl, rising pyruvate and up-to-down glucuronic acid groups as increasing furfural concentration. Furthermore, XG product with 1 g·L^-1 furfural addition showed the best hydroxyl scavenging effects, though reducing powers presented no variation. It was demonstrated that furfural, the common hydrolysis by-product, was not necessarily an inhibitor for fermentation, and an appropriate amount of furfural was beneficial to XG production with steady yield and good quality.

Freeze-Dried Matrices Based on Polyanion Polymers for Chlorhexidine Local Release in the Buccal and Vaginal Cavities

Chlorhexidine (CLX) is a wide spectrum cationic antimicrobial used for prevention and treatment of infections of buccal and vaginal cavities. To increase the residence time of CLX-based formulations at the application site and consequently reduce the daily dose frequency, new formulations composed of mucoadhesive polymers should be designed. The objective of this work was the development of matrices based on polyanionic polymers, such as sodium alginate, carboxymethylcellulose, xanthan gum and sodium hyaluronate, aimed to prolong the local release of CLX into the buccal or vaginal cavity. Matrices were prepared by freeze-drying and comply with 2 different preparative methods and characterized in terms of resistance to compression, water uptake ability, mucoadhesion, in vitro drug release behavior and antimicrobial activity toward representative pathogens of buccal and vaginal cavities. Results showed that the selection of suitable polymers associated to the adequate preparative method allowed to modulate matrix ability to hydrate, adhere to the mucosa and release the drug as well as to exert antimicrobial activity. In particular, matrix based on sodium hyaluronate was found to be the best performing formulation and could represent a versatile system for local release of CLX with potential application in both buccal and vaginal cavities.

Current status of biotechnological production and applications of microbial exopolysaccharides

Microbial exopolysaccharides (EPS) are an abundant and important group of compounds that can be secreted by bacteria, fungi and algae. The biotechnological production of these substances represents a faster alternative when compared to chemical and plant-derived production with the possibility of using industrial wastes as substrates, a feasible strategy after a comprehensive study of factors that may affect the synthesis by the chosen microorganism and desirable final product. Another possible difficulty could be the extraction and purification methods, a crucial part of the production of microbial polysaccharides, since different methods should be adopted. In this sense, this review aims to present the biotechnological production of microbial exopolysaccharides, exploring the production steps, optimization processes and current applications of these relevant bioproducts.

Anti-diabetic activity evaluation of a polysaccharide extracted from Gynostemma pentaphyllum

In current study, a polysaccharide (GPP) was successfully extracted from Gynostemma pentaphyllum herb. Monosaccharide composition of GPP was rhamnose, arabinose, galactose, glucose, xylose, mannose, galacturonic acid and glucuronic acid in a molar ratio of 4.11: 7.34: 13.31: 20.99: 1.07: 0.91: 4.75: 0.36. Molecular weight and polydispersity (Mw/Mn) of GPP were 4.070 × 10⁴ Da and 1.037, respectively. Primary structure features of GPP were determined to be a polysaccharide by FT-IR and NMR. Fasting blood sugar of diabetic mice decreased from 17.56 mmol/L to 7.42 mmol/L by orally administration of 0.5 mL GPP (1 mg/mL) for 30 days. GPP exhibited a dose-dependent inhibition effect on α-glucosidase activity. Moreover, GPP could inhibit the glucose absorption and affect the protein expression of GLUT2, but not the protein expression of SGLT1. These results indicated GPP could be used as an effective ingredient to prevent and cure diabetes.

Anticancer Activity of Polysaccharides Produced from Glycerol and Crude Glycerol by an Endophytic Fungus Chaetomium globosum CGMCC 6882 on Human Lung Cancer A549 Cells

Two polysaccharides were produced by Chaetomium globosum CGMCC 6882 from glycerol (GCP-1) and crude glycerol (GCP-2). Chemical characteristics results showed GCP-1 and GCP-2 were similar polysaccharides, but the molecular weights of GCP-1 and GCP-2 were 5.340 × 10⁴ Da and 3.105 × 10⁴ Da, respectively. Viabilities of A549 cells after treatment with GCP-1 and GCP-2 were 49% and 39% compared to the control group. Meanwhile, flow cytometry results indicated that GCP-1 and GCP-2 could induce 17.79% and 24.28% of A549 cells to apoptosis with 200 μg/mL concentration treated for 24 h. RT-PCR results suggested that GCP-1 and GCP-2 could be used as potential and effective apoptosis inducers on A549 cells by increasing BAX, CASPASE-3, CASPASE-9, TIMP-1, TIMP-2 expression and decreasing BCL-2 expression. This research provided an innovative approach to using a byproduct of biodiesel production (crude glycerol) to produce polysaccharides of potential medicinal benefit.

Antibacterial activity of a polysaccharide produced from Chaetomium globosum CGMCC 6882

In present work, a polysaccharide (GCP) was produced by Chaetomium globosum CGMCC 6882 and characterized. GCP was composed of arabinose, galactose, glucose, xylose, mannose and glucuronic acid in a molar ratio of 0.64: 2.58: 23.53: 0.90: 2.47: 0.27 with molecular weight of 8.093 × 10⁴ Da and polydispersity (Mw/Mn) of 1.014. Antibacterial characteristics and mechanism of GCP against Escherichia coli and Staphlococcus aureus were investigated by analysis of inhibition zones, minimum inhibitory concentration (MIC), alkaline phosphatase and β-galactosidase activities, electrical conductivity and bacterial morphology. Results showed that the MIC of GCP against E. coli and S. aureus were 1.75 mg/mL and 0.67 mg/mL, respectively. Moreover, GCP exerted antibacterial activities by disrupting the inner membrane and increasing the cell permeability, but had no influences on cell wall. This work indicated that GCP could be explored as a promising antibacterial agent in food and pharmaceutical industries.

Effect of Xanthan Gum/Soybean Fiber Ratio in the Batter on Oil Absorption and Quality Attributes of Fried Breaded Fish Nuggets

Xanthan gum (XG) and soybean fiber (SF) at varying ratios were incorporated into the batter to inhibit oil absorption in fried battered and breaded fish nuggets (BBFNs). BBFNs were prepared with 1.2% XG and SF blends (at ratios 1:3, 1:2, 1:1, 2:1, and 3:1 w/w), fried at 170 °C (40 s) followed by 190 °C (30 s), then evaluated for pickup, oil absorption, textural characteristics, and other quality attributes. Compared with the control (without the addition of XG and SF), fried BBFNs prepared with XD and SF had a significantly reduced fat content (P < 0.05). Among all the treatments, fried BBFNs with a 1:2 w/w ratio of XG and SF had the lowest fat content in the crust and the core (16.2% and 0.6%, respectively) and the highest moisture content. When compared with other treatments, the 1:2 w/w treatment group displayed a more intense golden yellow color, higher crispness, lower hardness, and a more compact structure in the crust, a greater elasticity and chewiness of the core, and the least oil penetration. The results proved that the combined addition of XG and SF in the batter can effectively inhibit oil absorption, which may be used to guide the production of low-fat fried BBFNs.

PRACTICAL APPLICATION

This study clearly showed that the combined addition of XG and SF at different ratios in the batter significantly affected fat content and quality attributes of fried BBFNs. The inhibition of oil absorption and improvement of color and textural characteristics in fried BBFNs depended on the XG/SF ratio added to the batter, and a 1:2 w/w ratio was found to produce the maximum enhancement.

Application of high-pressure homogenization on gums

High-pressure homogenization (HPH) is an emerging process during which a fluid product is pumped by pressure intensifiers, forcing it to flow through a narrow gap, usually measured in the order of micrometers. Gums are polysaccharides from vegetal, animal or microbial origin and are widely employed in food and chemical industries as thickeners, stabilizers, gelling agents and emulsifiers. The choice of a specific gum depends on its application and purpose because each form of gum has particular values with respect to viscosity, intrinsic viscosity, stability, and emulsifying and gelling properties, with these parameters being determined by its structure. HPH is able to alter those properties positively by inducing changes in the original polymer, allowing for new applications and improvements with respect to the technical properties of gums. This review highlights the most important advances when this process is applied to change polysaccharides from distinct sources and molecular structures, as well as the future challenges that remain. © 2017 Society of Chemical Industry.