The effect of chitosan on the flammability and thermal stability of polylactic acid/ammonium polyphosphate biocomposites

Layer-over-Layer Electrostatic Self-Assembly of Bioresourced Compounds in Thermoreversible Polylactide Gels as an Effective Approach to Enhance the Flame Retardancy of Aerogels

Polylactide is a high potential polymer that can satisfy the growing demand for sustainable and lightweight materials in construction, packaging, and structural applications. However, their high flammability poses a serious concern. Herein, with the aid of solvent exchange and noncovalent interactions, poly(l-lactide) (PLLA) thermoreversible gel was modified with sodium alginate (SA), chitosan (CS), and phytic acid (PA) via a layer-over-layer approach. Freeze-drying of the modified hydrogel furnished a highly flame retardant aerogel with shape stability and no shrinkage. The modified PLLA aerogel (PLLA@SA@CS@PA) exhibited self-extinguishment of flame, the highest limiting oxygen index of any porous polylactide (∼32%), and a tremendous reduction in flammability parameters such as the heat release rate, heat release capacity, total heat release, etc. A comprehensive mechanism of flame retardancy was proposed. This work provides a sustainable strategy for the flame retardant modification of semicrystalline polymer-based aerogels and is expected to expand their practical applications in various industrial sectors.

All-in-one bio-derived poly(L-lactic acid)-based composite with fire-resistance and smoke-suppression performance

The flammability of bio-derived poly(L-lactic acid) (PLA) greatly limits its application and eco-friendly multifunctional fire-fighting PLA-based composites are highly desired. In this work, a fully bio-based modified CS (C-CS) and commercially available eco-friendly ammonium polyphosphate (APP) were used as a synergistic flame retardant agent (C-CS/APP) to investigate its effects on fire-proofing performance and diverse properties of the PLA. The PLA/5%C-CS/5%APP composite exhibited excellent fire-resistant performance with anti-droplet, smoke-suppression and self-extinguishing property, and its limited oxygen index enhanced by 37 % (compared with neat PLA). This composite reached the highest V-0 fire safety rating, and its peak of heat release rate and total smoke production reduced by 26.5 % and 68.3 %, respectively. In addition, the char residue yield after the cone calorimeter test increased by 46 times in the composite, indicating an outstanding char-forming capacity. The condensed phase flame retardancy played a crucial role on the fire-fighting of this composite, that is, significantly enhanced char residue (as a physical barrier) blocked the heat exchange and O2 entry, and further suppressed the combustion reaction. Additionally, the PLA-based composite showed outstanding UV-absorption property, good anti-bacterial effect, and increased hydrophilicity and crystallizability.

Fully bio-based intumescent flame retardant hybrid: A green strategy towards reducing fire hazard and improving degradation of polylactic acid

Polylactic acid (PLA) is a promising renewable polymer material with excellent biodegradability and good mechanical properties. However, the easy flammability and slow natural degradation limited its further applications, especially in high-security fields. In this work, a fully bio-based intumescent flame-retardant system was designed to reduce the fire hazard of PLA. Firstly, arginine (Arg) and phytic acid (PA) were combined through electrostatic ionic interaction, followed by the introduction of starch as a carbon source, namely APS. The UL-94 grade of PLA/APS composites reached V-0 grade by adding 3 wt% of APS and exhibited excellent anti-dripping performance. With APS addition increasing to 7 wt%, LOI value increased to 26 % and total heat release decreased from 58.4 (neat PLA) to 51.1 MJ/m2. Moreover, the addition of APS increased its crystallinity up to 83.5 % and maintained the mechanical strength of pristine PLA. Noteworthy, APS accelerated the degradation rate of PLA under submerged conditions. Compared with pristine PLA, PLA/APS showed more apparent destructive network morphology and higher mass and Mn loss, suggesting effective degradation promotion. This work provides a full biomass modification strategy to construct renewable plastic with both good flame retardancy and high degradation efficiency.

Development of Flame-Retardant Polylactic Acid Formulations for Additive Manufacturing

Polymeric materials, renowned for their lightweight attributes and design adaptability, play a pivotal role in augmenting fuel efficiency and cost-effectiveness in railway vehicle development. The tailored formulation of compounds, specifically designed for additive manufacturing, holds significant promise in expanding the use of these materials. This study centers on poly(lactic acid) (PLA), a natural-based biodegradable polymeric material incorporating diverse halogen-free flame retardants (FRs). Our investigation scrutinizes the printability and fire performance of these formulations, aligning with the European railway standard EN 45545-2. The findings underscore that FR in the condensed phase, including ammonium polyphosphate (APP), expandable graphite (EG), and intumescent systems, exhibit superior fire performance. Notably, FR-inducing hydrolytic degradation, such as aluminum hydroxide (ATH) or EG, reduces polymer molecular weight, significantly impacting PLA's mechanical performance. Achieving a delicate balance between fire resistance and mechanical properties, formulations with APP as the flame retardant emerge as optimal. This research contributes to understanding the fire performance and printability of 3D-printed PLA compounds, offering vital insights for the rail industry's adoption of polymeric materials.

Preparation of phosphorus-doped chitosan derivative and its applications in polylactic acid: Crystallization, flame retardancy, anti-dripping and mechanical properties

The topic of biobased flame-retardant PLA has always been of great interest. In our study, we successfully synthesized a phosphorus-containing chitosan derivative (PCS) and combined it with aluminum hypophosphate (AP) to create an effective flame-retardant PLA system. PCS acted as an enhancer, enhancing the thermal performance, crystallinity, and toughness of PLA/AP. Compared to PLA modified with 12 wt% AP achieving UL-94 V-2 level and 24.3 % of limited oxygen index, PLA containing 3 wt% PCS and 9 wt% AP achieved UL-94 V-0 level and limited oxygen index of 28 %. The system testing studies such as CCT, Raman, XPS, and TG-IR results indicated that PLA/AP/PCS exhibited a dual flame-retardant mechanism of condensed and gas phases.

Synergistic effect of stereo-complexation and interfacial compatibility in ammonium polyphosphate grafted polylactic acid fibers for simultaneously improved toughness and flame retardancy

Flammability and poor toughness of unmodified PLA limit its applications in various fields. Though ammonium polyphosphate (APP) is a green and effective flame retardant, it has poor compatibility with the matrix, leading to a decrease in mechanical properties. Stereo-complexation greatly improves the strength and heat resistance of traditional PLA. However, the effect of flame retardants on the formation of stereo-complexed crystals and the impact of stereo-complexation on flame retardancy have not been studied previously. In this research, PDLA chains were first in-situ reacted with APP particles for improved interfacial compatibility. By utilizing the characteristic of PLA enantiomers that can form stereo-complexed crystals, near-complete stereo-complexed PLA fibers with flame retardancy were produced via clean and continuous melt spinning. The compatibility between PDLA-g-APP and PLLA matrix was studied by SEM, rheological analyses and DSC. Strength and flexibility of the fibers were simultaneously enhanced compared to traditional PLA due to the synergistic effect of interfacial compatibility and stereo-complexation. Compared to traditional PLA, the peak heat release rate and total heat release in microcalorimetry test were reduced by 33 % and 22 %, respectively. The flame-retardant fibers achieved a V-0 rating in the UL-94 test, and an increase in LOI value from 19.4 % to 28.2 %.

Development of a Sustainable Biobased Flame-Retardant Microcapsule and Its Flame-Retarding Mechanism on Asphalt Combustion

To develop an efficient, sustainable, and eco-friendly biobased flame-retardant microcapsule suitable for the working environments of tunnel asphalt pavement and reveal its flame-retarding mechanism on asphalt combustion, microencapsulated amylopectin (MAMP) was first prepared using an in situ polymerization method. Changes in the basic properties of amylopectin (AMP) and its compatibility with asphalt after microencapsulation were studied. Then, the flame retarding efficiency and improvement effects of MAMP on the flame retardancy of asphalt were investigated. Results show that melamine formaldehyde (MF) resin is evenly coated on the AMP surface without changing the chemical composition of AMP, increasing the thermal stability of AMP and the compatibility between AMP and asphalt. MAMP reacts with ammonium polyphosphate (APP) to release a number of incombustible gases to delay asphalt combustion at early stages and subsequently dehydrates to form a stable starch-based charring layer to suppress heat and mass transfer during asphalt combustion, improving the fire safety of asphalt materials. The added 3% MAMP can reduce the total enthalpy value of all exothermic peaks of the 10% APP-modified asphalt by 43.6%. As a carbonization agent, MAMP produces a charring layer with higher heat capacity during asphalt combustion, exerting an excellent inhibition effect on heat release. This study provides a reference for the application of biobased materials in flame-retarded asphalt pavements.

Toward flame-retardant and toughened poly(lactic acid)/cross-linked polyurethane blends via the interfacial reaction with the modified bio-based flame retardants

Incorporating bio-based flame retardants into polylactic acid (PLLA) to improve flame retardancy has always been the focus of research, but the improvement of flame retardancy is usually at the expense of mechanical properties. How to successfully balanced the material's mechanical and combustion properties has puzzled many scholars. Herein, ammonium polyphosphate (APP) and chitosan (CS) were used as acid source and carbon source respectively. Biological flame retardant APP@CS was designed and synthesized by electrostatic self-assembly method. In addition, toughened PLLA composites were prepared by reactive blending with the in-situ formed polyurethane (PU) as toughening phase. The results show that the CS shell not only reduces the hydrophilicity of the flame retardant, but also has good flame retardant property because of its excellent char forming property. The addition of 10 phr APP@CS can endow PLLA/crosslinked PU (CPU) with UL-94 V-2 rating and a LOI value of 24.9 %. Interestingly, CS shell participates in the in-situ reaction, which improves the mechanical properties of the composite with elongation at break of 74 %, which is higher than that of sample doped with the same amount of APP. This work provides guidance for the high performance modification of PLLA and is expected to expand the practical application range.

Water Hyacinth Fiber as a Bio-Based Carbon Source for Intumescent Flame-Retardant Poly (Butylene Succinate) Composites

In this study, flame-retardant poly (butylene succinate) (PBS) composites were developed utilizing a bio-based intumescent flame retardant (IFR) system. Water hyacinth fiber (WHF) was used as a bio-based carbon source, while ammonium polyphosphate (APP) served as both an acid source and a blowing agent. Effects of WHF:APP weight ratio and total IFR content on the thermal stability and flammability of WHF/APP/PBS composites were investigated. The results demonstrated that the 15WHF/30APP/PBS composite with a WHF to APP ratio of 1:2 and a total IFR content of 45 wt% had a maximum limiting oxygen index (LOI) value of 28.8% and acquired good flame retardancy, with a UL-94 V-0 rating without polymer-melt dripping. Additionally, its peak heat release rate (pHRR) and total heat release (THR) were, respectively, 53% and 42% lower than those of the neat PBS. Char residue analysis revealed that the optimal WHF:APP ratio and total IFR content promoted the formation of a high graphitized intumescent char with a continuous and dense structure. In comparison to the neat PBS, the tensile modulus of the 15WHF/30APP/PBS composite increased by 163%. Findings suggested the possibility of employing WHF, a natural fiber, as an alternative carbon source for intumescent flame-retardant PBS composites.

Polyvinyl alcohol flame retardant film based on halloysite nanotubes, chitosan and phytic acid with strong mechanical and anti-ultraviolet properties

The research of additive biomass flame retardants is becoming more and more popular. In this work, amino modified halloysite nanotubes (A-HNTs), chitosan (CS) and phytic acid (PA) were introduced into polyvinyl alcohol (PVA) matrix to construct PA/A-HNT/CS/PVA organic-inorganic composite film with hydrogen bond and covalent bond cross-linking network structure. Adding PA/A-HNT/CS can remarkably improve the mechanical strength, UV resistance and thermal stability of PVA film. Compared with control PVA film, the transmittance of composite film in ultraviolet region decreases from 90 % to <15 %, and the tensile strength raises from 19.8 MPa to 31.0 MPa. The thermal decomposition temperature of the composite film increases, the weight loss rate decreases obviously, and the carbon residue can reach 26 wt% at 700 °C. The limiting oxygen index increases from 18.5 % to 32.2 %. Furthermore, the addition of this flame-retardant system can obviously reduce the combustion intensity of PVA, and its flame-retardant grade can reach V-0. It is of great significance to expand the application of PVA and the development of biomass flame retardant.

Isolation, structural properties, and bioactivities of polysaccharides from Althaea officinalis Linn.: A review

Althaea officinalis Linn. (AO) is a widely distributed herbaceous plant with a long history of medicinal and food functions in Europe and Western Asia. Althaea officinalis polysaccharide (AOP), as one of the main components and a crucial bioactive substance of AO, has a variety of pharmacological activities, including antitussive, antioxidant, antibacterial, anticancer, wound healing, immunomodulatory, and infertility therapy effects. Many polysaccharides have been successfully obtained in the last five decades from AO. However, there is currently no review available concerning AOP. Considering the importance of AOP for biological study and drug discovery, the present review aims to systematically summarize the recent major studies on extraction and purification methods of polysaccharides from different AO parts (seeds, roots, leaves and flowers), as well as the characterization of their chemical structure, biological activity, structure-activity relationship, and the application of AOP in different fields. Meanwhile, the shortcomings of AOP research are further discussed in detail, and new valuable insights for future AOP research as therapeutic agents and functional foods are proposed.

Self-assembled biobased chitosan hybrid carrying N/P/B elements for polylactide with enhanced fire safety and mechanical properties

The inherent shortcomings such as flammability, brittleness, and low crystallinity limit the broad applications of poly(lactic acid) (PLA). To improve the fire resistance and mechanical properties of PLA, a chitosan-based core-shell flame retardant additive (APBA@PA@CS) was prepared for PLA via the self-assembly of interionic interactions among chitosan (CS), phytic acid (PA), and 3-aminophenyl boronic acid (APBA). The peak heat release rate (pHRR) and total heat release rate (THR) of PLA composite containing 3 wt% APBA@PA@CS decreased from 460.1 kW/m² and 75.8 MJ/m² to 419.0 kW/m² and 53.1 MJ/m², respectively. The presence of APBA@PA@CS contributed to the formation of a high-quality char layer rich in phosphorus and boron in the condensed phase and released non-flammable gases in the gas phase to hinder the exchange of heat and O₂, thereby having a synergistic flame retardant effect. Meanwhile, the tensile strength, elongation at break, impact strength, and crystallinity of PLA/APBA@PA@CS were increased by 3.7 %, 17.4 %, 5.3 %, and 55.2 %, respectively. This study provides a feasible route to construct a chitosan-based N/B/P tri-element hybrid to improve the fire safety performance and mechanical properties of PLA biocomposites.

Construction of hydrophobic fire retardant coating on cotton fabric using a layer-by-layer spray coating method

Multifunctional cotton fabric was prepared through a two-step layer-by-layer spray coating method, where the first layer of the coating comprising chitosan and ammonium phytate provided fire retardancy, and the second one with PDMS-ZnO composite imparted hydrophobicity to the fabric. A molecular dynamics (MD) simulation study was carried out to calculate interfacial adhesion of different components of the coating, based on which the sequencing of the coating layers was determined and used to prepare coated samples. The coated fabric demonstrated a significant improvement in fire retardancy through an increase in LOI from 18 % in control to 30 %, a reduction in char length from 30 cm to 7 cm, and a decrease in peak and total heat release rate values by 75 % and 33 %, respectively. The hydrophobicity of coated fabric was tested via water drop test where coated sample maintained a contact angle of 148° for up to 120 s, while the control sample showed 0°.

Fabrication of Highly Efficient Flame-Retardant and Fluorine-Free Superhydrophobic Cotton Fabric by Constructing Multielement-Containing POSS@ZIF-67@PDMS Micro-Nano Hierarchical Coatings

The facile construction of a cotton fabric with excellent flame-retardant and water-proof abilities is of great interest for multitask requirements. Herein, a nonfluorine, highly efficient, and cost-effective multifunctional cotton fabric was fabricated via sequentially depositing a novel multielement-containing flame-retardant phosphorylated octa-aminopropyl POSS (PPA-POSS) and a fluorine-free superhydrophobic coating of zeolitic imidazolate framework-67@poly(dimethylsiloxane) (ZIF-67@PDMS). Influences of the PPA-POSS concentration and ZIF-67@PDMS formula on the fire retardancy and water repellency of treated cotton were systematically investigated. The optimized flame-retardant sample CTF3 with 6.2 wt % PPA-POSS exhibited a high limiting oxygen index (LOI) of 34% and self-extinguishing ability. CTF3 was further modified with a properly formulated superhydrophobic ZIF-67@PDMS coating. CTF3-PHB2 displayed enhanced thermal stability, flame retardancy, and outstanding superhydrophobicity. Thermogravimetric analysis (TGA) results demonstrated that CTF3-PHB2 presented a high char residue of 35.9%, which was 220.5% higher than that of the control cotton (11.2%). More importantly, the heat release rate (HRR), total heat release (THR), and average effective heat of combustion (av-EHC) values of CTF3-PHB2 were significantly reduced by 51.4, 56.2, and 68.4%, respectively, compared with those of a pure cotton fabric. Moreover, CTF3-PHB2 showed superhydrophobicity (WCA > 159.3°) and good mechanical abrasion resistance. In addition, CTF3-PHB2 also showed protective abilities such as antifouling, self-cleaning, and water/oil separation performances even for strong acid/alkali mixtures. Thereby, it is believed that the PPA-POSS@ZIF-67@PDMS coating is promising for application in multifunctional textile materials.

Synergistic Flame Retardancy of Phosphatized Sesbania Gum/Ammonium Polyphosphate on Polylactic Acid

Phosphating sesbania gum (DESG) was obtained by modifying sesbania gum (SG) with 9,10-dihydro-9-oxa-10-phosphaphenanthrene-10-oxide (DOPO) and endic anhydride (EA). The structure of DESG was determined using Fourier transform infrared (FTIR) spectroscopy and nuclear magnetic resonance spectroscopy (¹H-NMR). Flame-retardant polylactic acid (PLA) composites were prepared by melt-blending PLA with DESG, which acted as a carbon source, and ammonium polyphosphate (APP), which acted as an acid source and a gas source. The flame retardancy of the PLA composite was investigated using vertical combustion (UL-94), the limiting oxygen index (LOI) and the cone calorimeter (CONE) test. Thermal properties and morphology were characterized via thermogravimetric analysis (TGA) and field emission scanning electron microscopy (FESEM), respectively. Experimental results indicated that when the mass ratio of DESG/APP was equal to 12/8 the LOI value was 32.2%; a vertical burning test (UL-94) V-0 rating was achieved. Meanwhile, the sample showed a lowest total heat release (THR) value of 52.7 MJ/m², which is a 32.5% reduction compared to that of neat PLA. Using FESEM, the uniform distribution of DESG and APP in the PLA matrix was observed. The synergistic effect of DESG and APP effectively enhanced the flame retardancy of PLA. Additionally, the synergistic mechanism of DESG and APP in PLA was proposed.

Flame-Retarding Properties of Injected and 3D-Printed Intumescent Bio-Based PLA Composites: The Influence of Brønsted and Lewis Acidity of Montmorillonite

The influence of processing intumescent bio-based poly(lactic acid) (PLA) composites by injection and fused filament fabrication (FFF) was evaluated. A raw (ANa) and two acidic-activated (AH2 and AH5) montmorillonites were added to the intumescent formulation, composed by lignin and ammonium polyphosphate, in order to evaluate the influence of the strength and the nature (Brønsted or Lewis) of their acidic sites on the fire behavior of the composites. The thermal stability and the volatile thermal degradation products of the composites were assessed. The injected and 3D-printed composites were submitted to cone calorimeter (CC), limit oxygen index (LOI), and UL-94 flammability tests. A similar tendency was observed for the injected and 3D-printed samples. The high density of strong Lewis sites in AH2 showed to be detrimental to the fire-retarding properties. For the CC test, the addition of the intumescent composite reduced the peak of heat released (pHRR) in approximately 49% when compared to neat PLA, while the composites containing ANa and AH5 presented a reduction of at least 54%. However, the addition of AH2 caused a pHRR reduction of around 47%, close to the one of the composite without clay (49%). In the LOI tests, the composites containing ANa and AH5 achieved the best results: 39% and 35%, respectively, for the injected samples, and 35 and 38% for the 3D-printed samples. For the composite containing AH2 the LOI values were 34% and 32% for injected and 3D-printed samples, respectively. Overall, the best performance in the flammability tests was achieved by the composites containing clays with only weak and moderate strength acidic sites (ANa and AH5).

Facile Preparation of Chitosan-Based Composite Film with Good Mechanical Strength and Flame Retardancy

To improve on the poor strength and flame retardancy of a chitosan (CS)-based functional film, cellulose nanofiber (CNF) was taken as the reinforced material and both ammonium polyphosphate (APP) and branched polyethyleneimine (BPEI) as the flame-retardant additives in the CS matrix to prepare the CS/CNF/APP/BPEI composite film by simple drying. The resulting composite film showed good mechanical strength, with a tensile strength reaching 71.84 Mpa due to the high flexibility of CNF and the combination of CS, CNF and BPEI through strong hydrogen bonding interactions. The flame retardant-performance of the composite film greatly enhanced the limit oxygen index (LOI), up to 32.7% from 27.6% for the pure film, and the PHRR intensity decreased to 28.87 W/g from 39.38% in the micro-scale combustion calorimetry (MCC) test due to the ability of BPEI to stimulate the decomposition of APP, releasing non-flammable gases such as CO₂, N₂, NH₃, etc., and forming a protective phosphating layer to block the entry of O₂. Based on the good flame retardancy, mechanical strength and transparency, the CS/CNF/APP/BPEI composite film has a great potential for future applications.

Governing effects of melt viscosity on fire performances of polylactide and its fire-retardant systems

Extreme flammability of polylactide (PLA) has restricted its real-world applications. Traditional research only focuses on developing new effective fire retardants for PLA without considering the effect of melt viscosity on its fire performances. To fill the knowledge gap, a series of PLA matrices of varied melt flow index (MFI) with and without fire retardants are chosen to examine how melt viscosity affects its fire performances. Our results show that the MFI has a governing impact on fire performances of pure PLA and its fire-retardant systems if the samples are placed vertically during fire testing. PLA with higher MFI values achieves higher limiting oxygen index (LOI) values, and a lower loading level of fire retardants is required for PLA to pass a UL-94 V-0 rating. This work unveils the correlation between melt viscosity and their fire performance and offers a practical guidance for creating flame retardant PLA to extend its applications.

•

The polymer melt viscosity plays a governing role in fire performances of PLA

•

PLA with higher MFI shows higher LOI and needs less FR to get the UL-94 V-0

•

A critical MFI range of 16.5–29.9 g/10min is found to affect the fire performance

•

Melt viscosity does not affect fire performances when PLA was tested horizontally

Improving the flame retardancy and accelerating the degradation of poly (lactic acid) in soil by introducing fully bio-based additives

In this study, a novel bio-based flame retardant LC-PA is prepared by the Mannich reaction between phytic acid (PA) and L-citrulline (LC). LC-PA is combined with tannic acid (TA) and introduced into PLA to improve fire performance and accelerate biodegradability. Compared with control PLA, the PLA composite containing 10% LC-PA/TA increases the LOI value to 26.9%, reaches a V-0 rating in the UL-94 test, and reduces the peak heat release rate and total heat release by 24.5% and 21.1%, respectively. More importantly, the introduction of LC-PA/TA accelerates the degradation rate of PLA in soil, which is of significance for biodegradable materials. The addition of LC-PA/TA can attract water and provide a suitable energy source for microbial proliferation, accelerating the hydrolysis and microbial degradation of PLA. This work provides a practical approach for high flame retardancy and rapid biodegradability in the soil to the bio-based polymer.

The Preparation and Characterization of Polylactic Acid Composites with Chitin-Based Intumescent Flame Retardants

In this work, a novel intumescent flame retardant (IFR) system was fabricated by the introduction of chitin as a green charring agent, ammonium polyphosphate (APP) as the acid source, and melamine (MEL) as the gas source. The obtained chitin-based IFR was then incorporated into a polylactic acid (PLA) matrix using melt compounding. The fire resistance of PLA/chitin composites was investigated via the limiting oxygen index (LOI), UL-94 vertical burning, and cone calorimeter (CONE) tests. The results demonstrated that the combination of 10%APP, 5%chitin and 5%MEL could result in a 26.0% LOI, a V-0 rating after UL and a 51.2% reduction in the peak heat release rate during the CONE test. Based on the mechanism analysis from both the morphology and the chemical structure of the char, it was suggested that chitin was a promising candidate as a charring agent for chitin reacted with APP and MEL with the formation of an intumescent layer on the surface.

Enhancement of Flame Retardancy and Mechanical Properties of Polylactic Acid with a Biodegradable Fire-Retardant Filler System Based on Bamboo Charcoal

A cooperative flame-retardant system based on natural intumescent-grafted bamboo charcoal (BC) and chitosan (CS) was developed for polylactic acid (PLA) with improved flame retardancy and minimal decline in strength properties. Chitosan (CS) as an adhesion promoter improved the interfacial compatibility between graft-modified bamboo charcoal (BC-m) and PLA leading to enhanced tensile properties by 11.11% and 8.42%, respectively for tensile strength and modulus. At 3 wt.% CS and 30 wt.% BC-m, the crystallinity of the composite increased to 38.92%, or 43 times that of pure PLA (0.9%). CS promotes the reorganization of the internal crystal structure. Thermogravimetric analysis showed significantly improved material retention of PLA composites in nitrogen and air atmosphere. Residue rate for 5 wt.% CS and 30 wt.% BC-m was 29.42% which is 55.1% higher than the theoretical value of 18.97%. Flammability tests (limiting oxygen index-LOI and UL-94) indicated significantly improved flame retardancy and evidence of cooperation between CS and BC-m, with calculated cooperative effectiveness index(Ce) >1. From CONE tests, the peak heat release rate (pHRR) and total heat release (THR) were reduced by 26.9% and 30.5%, respectively, for 3% CS + 20% BC-m in PLA compared with adding 20% BC-m alone. Analysis of carbon residue morphology, chemical elements and structure suggest CS and BC-m form a more stable char containing pyrophosphate. This char provides heat insulation to inhibit complete polymer pyrolysis, resulting in improved flame retardancy of PLA composites. Optimal mix may be recommended at 20% BC-m + 3% CS to balance compatibility, composite strength properties and flame retardance.

Comparison of differences in the flame retardancy of cotton fabrics caused by the introduction of cyclic polysiloxane into P/N organic coatings

Cyclic polysiloxane was introduced into P/N flame retardant coating to prepare Si/P/N synergistic FRs (ASPP-Si), which can improve the heat release and smoke release of cotton fabric and enhance the tensile strength of fiber.

Environmentally Benign and Self-Extinguishing Multilayer Nanocoating for Protection of Flammable Foam

Most current flame-retardant nanocoatings for flexible polyurethane foam (PUF) consist of passive barriers, such as clay, graphene oxide, or metal hydroxide. In an effort to develop a polymeric and environmentally benign nanocoating for PUF, positively charged chitosan (CH) and anionic sodium hexametaphosphate (PSP) were deposited using layer-by-layer (LbL) assembly. Only six bilayers of CH/PSP film can withstand flame penetration during exposure to a butane torch (∼1400 °C) for 10 s and stop flame spread on the foam. Additionally, cone calorimetry reveals that the fire growth rate, peak heat release rate, and maximum average rate of heat emission are reduced by 55, 43, and 38%, respectively, compared with uncoated foam. This multilayer thin film quickly dehydrates to form an intumescent charred exoskeleton on the surface of the open-celled structure of polyurethane, inhibiting heat transfer and completely eliminating melt dripping. This entirely polymeric nanocoating provides a safe and effective alternative for reducing the fire hazard of polyurethane foam that is widely used for cushioning and insulation.

Improving the flame retardancy of poly(lactic acid) using an efficient ternary hybrid flame retardant by dual modification of graphene oxide with phenylphosphinic acid and nano MOFs

A novel ternary hybrid nanoflake (GPZ) based on graphene oxide (GO), phenylphosphinic acid (PPA) and nano metal-organic framework (nano ZIF-8) particles has been designed and synthesized via a simple two-step strategy. GPZ shows high thermal stability and good compatibility with PLA matrix. When GPZ nanoflakes are added into PLA, the tensile strength and toughness of the PLA-4 with 2.0 wt% of GPZ reach 44.1 MPa and 86.0 MPa compared with 30.0 MPa and 12.8 MPa of pure PLA owing to the good dispersion of GPZ in PLA matrix and their reinforcing effects. The incorporation of GPZ also dramatically enhances the flame retardancy of PLA and the PHRR of PLA-4 with 2.0 wt% of GPZ achieves about 316.2 W/g, which is decreased by 39.5% relative to 523.0 W/g of pure PLA, respectively. The LOI of PLA-4 is 27.0%, increasing about 31.7% compared to 20.5% of pure PLA. Meanwhile, the HRR and THR in the cone calorimeter test curves for the PLA nanocomposites have also been evidently reduced. The TG-IR is applied to characterize the pyrolysis gaseous products and volatile components are suppressed with addition of GPZ. The SEM, Raman and XPS results of char residues show that a protective graphitized char layer plays a major role in improving the flame retardancy, which mainly because of the catalytic and cross-linking effects of GO, nano ZIF-8 and PPA during combustion of PLA nanocomposites.

Phosphorus-Containing Flame Retardants from Biobased Chemicals and Their Application in Polyesters and Epoxy Resins

Phosphorus-containing flame retardants synthesized from renewable resources have had a lot of impact in recent years. This article outlines the synthesis, characterization and evaluation of these compounds in polyesters and epoxy resins. The different approaches used in producing biobased flame retardant polyesters and epoxy resins are reported. While for the polyesters biomass derived compounds usually are phosphorylated and melt blended with the polymer, biobased flame retardants for epoxy resins are directly incorporated into the polymer structure by a using a phosphorylated biobased monomer or curing agent. Evaluating the efficiency of the flame retardant composites is done by discussing results obtained from UL94 vertical burning, limiting oxygen index (LOI) and cone calorimetry tests. The review ends with an outlook on future development trends of biobased flame retardant systems for polyesters and epoxy resins.