Preparation of oxidized sodium alginate with different molecular weights and its application for crosslinking collagen fiber

Oxidized ionic polysaccharide hydrogels: Review on derived scaffolds characteristics and tissue engineering applications

Polysaccharide-based hydrogels have gained prominence due to their non-toxicity, biocompatibility, and structural adaptability for constructing tissue engineering scaffolds. Polysaccharide crosslinking is necessary for hydrogel stability in vivo. The periodate oxidation enables the modification of native polysaccharide characteristics for wound healing and tissue engineering applications. It produces dialdehydes, which are used to crosslink biocompatible amine-containing macromolecules such as chitosan, gelatin, adipic acid dihydrazide, silk fibroin, and peptides via imine/hydrazone linkages. Crosslinked oxidized ionic polysaccharide hydrogels have been studied for wound healing, cardiac and liver tissue engineering, bone, cartilage, corneal tissue regeneration, abdominal wall repair, nucleus pulposus regeneration, and osteoarthritis. Several modified hydrogel systems have been synthesized using antibiotics and inorganic substances to improve porosity, mechanical and viscoelastic properties, desired swelling propensity, and antibacterial efficacy. Thus, the injectable hydrogels provide a host-tissue-mimetic environment with high cell adhesion and viability, making them appropriate for scarless wound healing and tissue engineering applications. This review describes the oxidation procedure for alginate, hyaluronic acid, gellan gum, pectin, xanthan gum and chitosan, as well as the characteristics of the resulting materials. Furthermore, a critical review of scientific advances in wound healing and tissue engineering applications has been provided.

Hydrogels Based on Proteins Cross-Linked with Carbonyl Derivatives of Polysaccharides, with Biomedical Applications

Adding carbonyl groups into the hydrogel matrix improves the stability and biocompatibility of the hydrogels, making them suitable for different biomedical applications. In this review article, we will discuss the use of hydrogels based on polysaccharides modified by oxidation, with particular attention paid to the introduction of carbonyl groups. These hydrogels have been developed for several applications in tissue engineering, drug delivery, and wound healing. The review article discusses the mechanism by which oxidized polysaccharides can introduce carbonyl groups, leading to the development of hydrogels through cross-linking with proteins. These hydrogels have tunable mechanical properties and improved biocompatibility. Hydrogels have dynamic properties that make them promising biomaterials for various biomedical applications. This paper comprehensively analyzes hydrogels based on cross-linked proteins with carbonyl groups derived from oxidized polysaccharides, including microparticles, nanoparticles, and films. The applications of these hydrogels in tissue engineering, drug delivery, and wound healing are also discussed.

New plant polyphenol-derived tannic acid-based chromium-free tanning agent for sustainable and clean leather production

This study aimed to prepare a new bio-based chromium-free tanning agent. The green epoxide monocase ethylene glycol diglycidyl ether (EGDE) was grafted with tannic acid (TA) derived from natural plant using the one-pot method to synthesize new plant polyphenol-derived tannic acid-based chromium-free tanning agents (TA-EGDE) with abundant terminal epoxides. FTIR, 1H NMR, XPS, GPC, SEM, and other analytical techniques were used to characterize tanning agents. These consequences manifested that EGDE was successfully grafted with the phenol hydroxyl group of TA. The epoxide value of TA-EGDE showed a tendency to increase and then decrease with increasing EGDE dosage, and the epoxide value of TA-EGDE-2 attained a maximum of 0.262 mol/100 g. GPC analysis showed that the formula weight of the prepared TA-EGDE was partially distributed above 5000 Da. The tanning experiment demonstrated that the shrinkage temperatures (Ts) of the TA-EGDE-tanned leathers were all higher than 81.5 °C. Compared with the traditional commercial chromium-free tanning agent (F-90, TWS), TA-EGDE-tanned leathers exhibited higher Ts and better mechanical properties. The TA-EGDE prepared in this study not only has ecological environmental protection but also provides finished leather with good moisture, heat resistance, and mechanical properties.

Tuning a green carboxymethyl cellulose-based pre-tanning agent via peroxide oxidation for high chrome exhaustion in leather industry

The low chrome uptake by collagen in the conventional tanning process leads to the pollution of the wastewater. Due to environmental concerns, leather scientists are already searching for innovative ways to produce pre-tanning agents as a high exhaustion chrome tanning auxiliary. Herein, a novel kind of pre-tanning agent is engineered by converting carboxymethyl cellulose (CMC) to oxidized carboxymethyl cellulose (OCMC) via the hydrogen peroxide process. FT-IR and carboxyl content analysis demonstrated the increase in carboxyl content after oxidation. After that, the obtained OCMC was utilized as a pre-tanning agent, resulting in a high exhaustion of chrome (92.76 %) which is 27.76 % more than conventional chrome tanning (65 %), and the amount of chrome in wastewater reduced to 7.24 %. The hydrothermal stability of wet-blue increased by increasing the uptake of chrome (Ts = 118 °C). The obtained crust leather represented excellent mechanical properties (Tensile strength: 305.68 kg/cm2; tear strength: 50 kg/cm) and desirable organoleptic properties. The environmental analysis signifies a significant step towards a cleaner and sustainable tanning process (COD = 1600, BOD5 = 560 mg/L) compared to the conventional chrome tanning process. Consequently, the obtained results offer a green pre-tanning agent to meet the requirements of the sustainable development of the leather industry.

Mussel-inspired "all-in-one" sodium alginate/carboxymethyl chitosan hydrogel patch promotes healing of infected wound

Hydrogels have been widely used as wound dressings to accelerate wound healing. However, due to the impaired skin barrier at the wound site, external bacteria can easily invade the wound and cause infection. In this study, we designed a dopamine-modified sodium alginate/carboxymethyl chitosan/polyvinylpyrrolidone (CPD) hydrogel, which was able to promote wound healing while preventing wound infection. Due to the high content of catechol groups, the CPD hydrogel exhibited good tissue adhesion ability and a significant scavenging ability for DPPH• and PTIO• radicals. Under near-infrared laser irradiation, the temperature of CPD hydrogel increased significantly, which significantly killed the Staphylococcus aureus and Escherichia coli. The cell migration test confirmed that CPD hydrogel could promote the cell migration ratio. In the in vivo wound healing test for infected full-thickness skin defect, CPD hydrogel significantly inhibited bacterial proliferation and enhanced wound healing rate. Therefore, the multifunctional hydrogel is expected to be applied to wound healing.

The alginate dialdehyde crosslinking on curcumin-loaded zein nanofibers for controllable release

In this study, electrospun zein/alginate dialdehyde (AD) nanofibers were prepared by green crosslinking. The degree of crosslinking could reach 50.72 %, and the diameter of electrospun fibers ranged from 446.2 to 541.8 nm. The generation of AD and the bonding of crosslinking were further confirmed by the changes on characteristic peaks and conformational ratios in the infrared spectroscopy and secondary structure analysis. High concentrations of AD led to improved thermal stabilities, mechanical properties, and hydrophobicity. And the highly crosslinked nanofibers (Z-8) owned the highest elastic modulus (24.92 MPa), tensile strength (0.28 MPa), and elongation at break (8.14 %) among five samples. Moreover, Z-8 possessed a high swelling ratio of 5.45 g/g, and a low weight loss of 6.09 %. The samples could encapsulate curcumin efficiently and show controllable release behaviors based on different AD addition. And the oxidation resistance of nanofibers gradually improved, consistent with the release performances. This study indicated AD crosslinking favored the preparation and application of zein nanofibers, and the oxidized polysaccharide acted as the green crosslinking agent, which provided reference value for the application of polysaccharides in food-related electrospun materials.

Elevating the potential of CAR-T cell therapy in solid tumors: exploiting biomaterials-based delivery techniques

Chimeric antigen receptor (CAR) T cells exhibit promising progress in addressing hematologic malignancies. However, CAR-T therapy for solid tumors remains limited, with no FDA-approved CAR-T products available for clinical use at present. Primary reasons include insufficient infiltration, accumulation, tumor immunosuppression of the microenvironment, and related side effects. Single utilization of CAR-T cannot effectively overcome these unfavorable obstacles. A probable effective pathway to achieve a better CAR-T therapy effect would be to combine the benefits of biomaterials-based technology. In this article, comprehensive biomaterials strategies to break through these obstacles of CAR-T cell therapy at the tumor sites are summarized, encompassing the following aspects: 1) generating orthotopic CAR-T cells; 2) facilitating CAR-T cell trafficking; 3) stimulating CAR-T cell expansion and infiltration; 4) improving CAR-T cell activity and persistence; 5) reprogramming the immunosuppressive microenvironments. Additionally, future requirements for the development of this field, with a specific emphasis on promoting innovation and facilitating clinical translation, are thoroughly discussed.

Preparation and Modification of Collagen/Sodium Alginate-Based Biomedical Materials and Their Characteristics

(1) Background: Collagen and sodium alginate are commonly used in the field of biomedical materials due to their excellent biocompatibility. This study focuses on the preparation, modification, and characterization of collagen/sodium alginate (C/SA)-based biomedical materials. (2) Methods: The characteristics, including surface chemistry, mechanical properties, hygroscopicity, and porosity, were analyzed. The hemostatic activity in vitro was measured using a blood clotting assay and dynamic blood clotting assay. (3) Results: The results from microstructure and porosity measurement revealed that all of the sponges exhibited a porosity of more than 95 percent. The sponge cross-linked with 1-ethyl-3-(3-dimethylaminopropyl) carbodiimide/N-hydroxysuccinimide (EDC/NHS) showed better tensile strength and lower elongation at break. The sponges cross-linked with EDC/NHS and oxidized sodium alginate (OSA) exhibited the highest hygroscopicity in comparison with the uncross-linked sponge. (4) Conclusions: Our study demonstrated that the C/SA-based material we prepared exhibited a high level of porosity, enabling efficient absorption of tissue exudate and blood. Additionally, the materials revealed excellent hemocompatibility, making them suitable for use as a hemostatic dressing in the field of biomedical materials.

Collagen-based scaffolds with high wet-state cyclic compressibility for potential oral application

Soft tissue substitutes have been developed to treat gingival recessions to avoid a second surgical site. However, products of pure collagen for clinical application lack their original mechanical strengths and tend to degrade fast in vivo. In this study, a collagen-based scaffold crosslinked with oxidized sodium alginate (OSA-Col) was developed to promote mechanical properties. Compared with commercial products collagen matrix (CM) and collagen sponge (CS), OSA-Col scaffolds presented higher wet-state cyclic compressibility, early anti-degradation ability, similar hemocompatibility and cytocompatibility. Furthermore, in the subcutaneous implantation experiment, OSA2-Col3 scaffolds showed better anti-degradation performance than CS scaffolds and superior neovascularization than CM scaffolds. These results demonstrated that OSA2-Col3 scaffolds had potential as a new soft tissue substitute for the treatment of gingival recessions.

Crosslinked fish scale gelatin/alginate dialdehyde functional films incorporated with carbon dots derived from pomelo peel waste for active food packaging

A multifunctional and environmentally friendly composite film was developed by incorporating pomelo peel-derived carbon dots (PCDs) into a fish scale gelatin (FSG)/alginate dialdehyde (ADA) biopolymer matrix. ADA was used to reinforce the physicomechanical properties of the FSG film via Schiff base crosslinking. PCDs with strong antioxidant and antimicrobial activities were synthesized via a hydrothermal method. The effect of various PCDs content on the surface morphological, physicochemical, and functional characteristics of the composite films was investigated. The results showed that the introduction of PCDs into the FSG/ADA matrix effectively reinforced the mechanical performance, enhanced the water vapor and water resistance, increased UV-light blocking, conferred fluorescence properties, and improved the thermal properties of the composite films. Under 3 wt% PCDs content, the FSG/ADA/PCDs-3 % composite film not only presented significant antioxidant capacity with a radical scavenging rate of 91.71 % for DPPH and approximately 100 % for ABTS, but also exhibited excellent antimicrobial ability against bacteria and fungi. Results of a preservation experiment showed that the prepared FSG/ADA/PCDs-3 % film preserved the physiological qualities of strawberries post-harvest and extended their shelf-life to 7 days at room temperature. Overall, the fabricated FSG/ADA/PCDs composite films are promising for use in eco-friendly active food packaging.

Cleaner Leather Tanning and Post-Tanning Processes Using Oxidized Alginate as Biodegradable Tanning Agent and Nano-Hydroxyapatite as Potential Flame Retardant

In this study, sodium alginate (SA) was oxidized with potassium periodate to produce an alginate-based tanning agent. Using OSA as a biodegradable tanning agent and a nano-hydroxyapatite (nano-HAp) low concentration suspension to give flame retardancy to leather, eco-design concepts were applied to establish a chrome-, aldehyde-, and phenol-free tanning process. Micro-DSC, 1H unilateral nuclear magnetic resonance (NMR), attenuated total reflection mode Fourier transform infrared spectroscopy (FTIR-ATR), and scanning electron microscopy with energy dispersive X-ray spectroscopy (SEM-EDS) were used to investigate the complex matrix collagen-OSA-nano-HAp. Micro-differential scanning calorimetry (micro-DSC) was used to assess OSA's ability to interact with collagen and stabilize the collagen-OSA matrix, while 1H unilateral (NMR) was used to investigate the aqueous environment and its limitations around collagen molecules caused by their association with OSA and nano-HAp. Industrial standard tests were used to assess the mechanical properties and fire resistance of the new leather prototype. The findings reported here indicate that both OSA and nano-HAp are suitable alternatives for cleaner tanning technologies and more sustainable leather.

Angiogenesis, hemocompatibility and bactericidal effect of bioactive natural polymer-based bilayer adhesive skin substitute for infected burned wound healing

Thermal wounds are complex and lethal with irregular shapes, risk of infection, slow healing, and large surface area. The mortality rate in patients with infected burns is twice that of non-infected burns. Developing multifunctional skin substitutes to augment the healing rate of infected burns is vital. Herein, we 3D printed a hydrogel scaffold comprising carboxymethyl chitosan (CMCs) and oxidized alginate grafted catechol (O-AlgCat) on a hydrophobic electrospun layer, forming a bilayer skin substitute (BSS). The functional layer (FL) was fabricated by physiochemical crosslinking to ensure favorable biodegradability. The gallium-containing hydrophobic electrospun layer or backing layer (BL) could mimic the epidermis of skin, avoiding fluid penetration and offering antibacterial activity. 3D printed FL contains catechol, gallium, and biologically active platelet rich fibrin (PRF) to adhere to both tissue and BL, show antibacterial activity, encourage angiogenesis, cell growth, and migration. The fabricated bioactive BSS exhibited noticeable adhesive properties (P ≤ 0.05), significant antibacterial activity (P ≤ 0.05), faster clot formation, and the potential to promote proliferation (P ≤ 0.05) and migration (P ≤ 0.05) of L929 cells. Furthermore, the angiogenesis was significantly higher (P ≤ 0.05) when evaluated in vivo and in ovo. The BSS-covered wounds healed faster due to low inflammation and high collagen density. Based on the obtained results, the fabricated bioactive BSS could be an effective treatment for infected burn wounds.

Fabrication of Injectable Kartogenin-Conjugated Composite Hydrogel with a Sustained Drug Release for Cartilage Repair

Cartilage tissue engineering has attracted great attention in defect repair and regeneration. The utilization of bioactive scaffolds to effectively regulate the phenotype and proliferation of chondrocytes has become an elemental means for cartilage tissue regeneration. On account of the simultaneous requirement of mechanical and biological performances for tissue-engineered scaffolds, in this work we prepared a naturally derived hydrogel composed of a bioactive kartogenin (KGN)-linked chitosan (CS-KGN) and an aldehyde-modified oxidized alginate (OSA) via the highly efficient Schiff base reaction and multifarious physical interactions in mild conditions. On the basis of the rigid backbones and excellent biocompatibility of these two natural polysaccharides, the composite hydrogel demonstrated favorable morphology, easy injectability, good mechanical strength and tissue adhesiveness, low swelling ratio, long-term sustainable KGN release, and facilitated bone marrow mesenchymal stem cell activity, which could simultaneously provide the mechanical and biological supports to promote chondrogenic differentiation and repair the articular cartilage defects. Therefore, we believe this work can offer a designable consideration and potential alternative candidate for cartilage and other soft tissue implants.

Alginate: Microbial production, functionalization, and biomedical applications

Alginates are natural polysaccharides widely participating in food, pharmaceutical, and environmental applications due to their excellent gelling capacity. Their excellent biocompatibility and biodegradability further extend their application to biomedical fields. The low consistency in molecular weight and composition of algae-based alginates may limit their performance in advanced biomedical applications. It makes microbial alginate production more attractive due to its potential for customizing alginate molecules with stable characteristics. Production costs remain the primary factor limiting the commercialization of microbial alginates. However, carbon-rich wastes from sugar, dairy, and biodiesel industries may serve as potential substitutes for pure sugars for microbial alginate production to reduce substrate costs. Fermentation parameter control and genetic engineering strategies may further improve the production efficiency and customize the molecular composition of microbial alginates. To meet the specific needs of biomedical applications, alginates may need functionalization, such as functional group modifications and crosslinking treatments, to achieve enhanced mechanical properties and biochemical activities. The development of alginate-based composites incorporated with other polysaccharides, gelatin, and bioactive factors can integrate the advantages of each component to meet multiple requirements in wound healing, drug delivery, and tissue engineering applications. This review provided a comprehensive insight into the sustainable production of high-value microbial alginates. It also discussed recent advances in alginate modification strategies and alginate-based composites for representative biomedical applications.

Colorimetric pH-responsive and hemostatic hydrogel-based bioadhesives containing functionalized silver nanoparticles

Here we develop and characterize a dual-cross-linked pH-responsive hydrogel based on the carboxyethyl chitosan-oxidized sodium alginate (CAO) containing silver nanoparticles (Ag NPs) functionalized with tannic acid/red cabbage (ATR). This hybrid hydrogel is formed via covalent and non-covalent cross-linking. The adhesive strength measured in contact with cow skin and compression strength is measured more than 3 times higher than that of CAO. Importantly, the incorporation of 1 ​wt% ATR into CAO significantly enhances the compression strength of CAO from 35.1 ​± ​2.1 ​kPa to 97.5 ​± ​2.9 ​kPa. Moreover, the cyclic compression tests confirm significantly higher elastic behavior of CAO after the addition of ATR-functionalized NPs to CAO. The CAO/ATR hydrogel is pH-sensitive and indicated remarkable color changes in different buffer solutions. The CAO/ATR also shows improved hemostatic properties and reduced clotting time compared to the clotting time of blood in contact with CAO hydrogel. In addition, while CAO/ATR is effective in inhibiting the growth of both Gram-positive and Gram-negative bacteria, CAO is only effective in inhibiting the growth of Gram-positive bacteria. Finally, the CAO/ATR hydrogel is cytocompatible with L929 fibroblasts. In summary, the resulting CAO/ATR hydrogel shows promising results in designing and constructing smart wound bioadhesives with high cytocompatibility, antibacterial properties, blood coagulation ability, and fast self-healing properties.

Eco-friendly PVA-LYS fibers for gold nanoparticle recovery from water and their catalytic performance

In this work, we grafted lysine on PVA electrospun fibers, using a green preparation technique. The resulting fiber mats were proposed for gold nanoparticles (AuNPs) removal from water. The efficiency of three fibers with different lysine amounts (10, 20, and 30%) was investigated. The incorporation of amino groups in PVA fibers was firstly proved by FTIR, SEM, and elemental analysis, confirming the presence of lysine. Among the three different fibers, PVA-LYS 30% has shown the best removal efficiency, reaching 65%, at pH equal to 5. Adsorption isotherms were studied and showed that the Langmuir model is the best model fitting our experimental results, with a maximum adsorption capacity of 20.1 mg g^-1. Metal-ligand interactions and electrostatic attraction between protonated amino groups of lysine on the fibers and negatively charged, citrate capped, AuNPs are the main proposed mechanisms for AuNP adsorption on the fibers. Sustainability of AuNPs adsorbed on these fibers has been checked through their reuse as catalyst for the reduction of 4-nitrophenol to 4-aminophenol. The process was completed within 60 min, and their reusability showed more than 99% efficiency after 5 reduction cycles. Our results prove that green PVA-LYS fibers can extract nanoparticles from water, as low cost-effective and eco-friendly adsorbent, and contribute to the promotion of a circular economy approach, through their reuse as catalyst in the reduction of pollutants.

Preparation and application of tremella polysaccharide based chrome free tanning agent for sheepskin processing

The abuse of chrome tanning agent in leather processing has caused great harm to human health and the natural environment. We use tremella polysaccharides (TP), lentinan (LNT) and konjac gum (KG) as raw materials, and sodium periodate as oxidant to prepare the corresponding polysaccharide tanning agent. Tremella polysaccharide was selected as the best tanning agent according to the shrinkage temperature, and the subsequent experiments were carried out. Tremella polysaccharide (TP) as raw material and sodium periodate as an oxidant, dialdehyde tremella polysaccharide (DTP) was prepared and applied in leather tanning. The effects of different oxidation conditions (sodium periodate dosage, temperature, pH, and reaction time) on the shrinkage temperature of DTP tanned leather were studied. The change of shrinkage temperature showed that the dosage of sodium periodate had the greatest influence on the shrinkage temperature. Therefore, the effects of different dosage of sodium periodate on the aldehyde content and molecular weight of DTP were investigated, including the analysis of physical properties and microstructure of tanned leather. In general, the increase of sodium periodate dosage was found to increase the aldehyde content and reduce the molecular weight, which was more conducive to leather tanning.

Effects of ginger essential oil on physicochemical and structural properties of agar‑sodium alginate bilayer film and its application to beef refrigeration

To maintain the freshness of meat products, an agar‑sodium alginate (AS) bilayer antibacterial film incorporated with ginger essential oil (GEO) was developed. The effect of GEO at different concentrations (1%, 2%, 3% and 4% v/v) on the physical properties, micro-structure and antibacterial activity closely related to AS film's application to beef refrigeration was extensively studied. In addition, the effects of AS bilayer active film on refrigeration quality and shelf life of beef were systematically evaluated. The porous structure and number of oil droplets became more obvious with the increase of GEO amount in AS film. The incorporation and increase of GEO could delay the lipid oxidation and protein decomposition of beef, reduce the total counts of the tested microorganisms (total viable bacteria, psychrotrophic bacteria, Escherichia coli, Staphylococcus aureus, yeast, and mold) in meat samples. Compared with commercial polyethylene (PE) packaging, the accumulation of basic compounds from the degradation of beef protein as well as the microbial contamination was obviously improved, which could extend the comprehensive shelf life of beef by 4-6 days. Consequently, AS bilayer films incorporated with GEO, especially GEO at 4.0% (v/v) GEO concentration can be developed to be an antibacterial active packaging material for beef refrigeration.

Synthesis of oxidized sodium alginate and its electrospun bio-hybrids with zinc oxide nanoparticles to promote wound healing

Electrospun fibers provide a promising platform for wound healing; however, they lack requisite characteristics for wound repair, including antibacterial and anti-inflammatory properties and angiogenic ability. Sodium alginate (SA) is being used for different types of applications. However, the poor spinnability of SA restricts its applications. The objectives of this study were three-fold: a) to synthesize oxidized sodium alginate (OSA) to improve its spinnability, b) to fabricate composite fibrous membranes by blending OSA along with zinc oxide nanoparticles (ZnO-NPs), and c) to decipher antibacterial and anti-inflammatory properties as well as biocompatibility of membranes in vitro and in vivo. OSA displaying different oxidation degrees (Dox (%)) was synthesized by varying the molar ratio of sodium periodate to SA. OSA (Dox, ∼48 %) afforded smooth and uniform fibers; 0.5 wt% of adipic dihydrazide (ADH) evolved into structurally stable and water-insoluble membranes. Composite fibrous membranes containing 2 wt% of ZnO-NPs displayed good biocompatibility and bactericidal effect against Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus) in vitro. In addition, composite membranes showed remarkable epithelialization, neovascularization, and anti-inflammatory response than that of the membranes devoid of ZnO-NPs. Conclusively, these composite fibrous membranes may have broad implications for wound healing applications.

An injectable elastic hydrogel crosslinked with curcumin-gelatin nanoparticles as a multifunctional dressing for the rapid repair of bacterially infected wounds

Injectable self-healing hydrogel dressings with excellent elasticity and multifunctional repair effects have been in high demand in wound healing applications, while maintaining stable elasticity in injectable multifunctional hydrogel dressings is still a challenge. Based on carboxymethyl chitosan (CMCS), curcumin-gelatin nanoparticles (CG NPs), and sodium alginate oxide (OSA), we developed a double-crosslinking injectable elastic self-healing hydrogel without any chemical cross-linking agent as a multifunctional wound healing dressing. CG NPs were more stable than pure curcumin (Cur) nanoparticles and could regulate the cross-linking of injectable hydrogels for high elasticity and rapid self-healing. We found that the CG NPs endowed the injectable hydrogel with good anti-inflammatory, antibacterial, and reactive oxygen scavenging activities and could significantly shorten the wound healing time in infected full-thickness skin defect rats by promoting the polarization of M2-type macrophages, reducing oxidative damage, accelerating collagen deposition, enhancing granulation formation, and elevating angiogenesis. Taken together, the tunable elastic injectable hydrogel dressing exhibited a long-term service life with sustained repair function and can be taken as an optimal candidate for bacteria-infected wound healing.

Strategical development of chrome-free tanning agent by integrating layered double hydroxide with starch derivatives

The development of sustainable and eco-friendly leather industry requires green tanning agents because of unbounded chromium (easily converted into hazardous Cr-VI) in chrome tanned leather. In this study, a chrome-free tanning agent (OS-LDHs) was established by integrating layered double hydroxide (magnesium aluminum zirconium hydrotalcite, LDHs) with starch derivatives. A series of oxidized starch (OS) were prepared as masking agents for LDHs tanning process. Among them, the weight-average molecular weight (Mw) of 1685 g/mol could be reached, which will promise the well-distribution of OS. The SEM and EDS analysis confirmed the uniform penetration of OS-LDHs, avoiding accumulation on the surface of crust leather. Notably, leather tanned by OS-LDHs achieved shrinkage temperature of 66.7 °C, porosity of 75.51 % and tear strength of 66.7 N/mm. Not only the hydrogen bond but also the coordination between NH₂, COOH in collagen and OS-2-LDHs improved the thermal stability of leather without destroying the collagen triple helix.

A novel synergistic covalence and complexation bridging strategy based on multi-functional biomass-derived aldehydes and Al(III) for engineering high-quality eco-leather

To get rid of the chrome pollution faced by the leather industry, we explored a novel engineering high-quality eco-leather technology based on the synergistic interactions between biomass-based aldehydes and Al(III). Firstly, dialdehyde xanthan gum (DXG) was prepared to covalently crosslink with the collagen fibers (CFs) via Schiff-base linkages under alkaline conditions, endowing the leather with a shrinkage temperature (Ts) of 80 °C and opening channels for the subsequent penetration of Al species (AL). Secondly, and for this latter purpose, the DXG-tanned leather was acidified to release part of the DXG from the leather according to the dynamic nature of the Schiff-base. Containing suitable oxygen-containing groups (OGs) with excellent complexation capabilities, the released DXG served as masking agents for AL, facilitating the penetration of AL into the inner CFs network for further complexation crosslinking. Consequently, a denser crosslinking network was constructed in the leather, and the crust leather exhibited higher Ts (82.2 °C), improved mechanical (tensile strength: 13.4 N/mm², tear strength: 53.3 N/mm) and organoleptic properties than those of the DXG crust or AL crust leathers. This demonstrates that this synergistic covalence and complexation bridging strategy is a sustainable option to substitute highly restricted chrome tanning agent for eco-leather production.

Biodegradable dual stimuli responsive alginate based microgels for controlled agrochemicals release and soil remediation

To meet the growing food demand of increasing world population while reducing the harmful environmental effects of agrochemicals, development of smart nanoformulation is of prime importance. Herein, dual stimuli responsive alginate based microgels (OAlgDP MGs) (≈160 nm) are developed for controlled release of agrochemicals and soil remediation. These microgels are prepared using octyl amine functionalized alginate which is crosslinked by 3, 3'-dithiopropionohydrazide crosslinker providing both hydrazone and disulfide bonds in microgels network. OAlgDP MGs are further loaded with hydrophobic diuron herbicide displaying ≈85 % encapsulation efficiency. Sustained release of diuron is obtained in 2 mM GSH (≈100 % after 380 h) and at pH 5 (≈72 % after 240 h). Furthermore, OAlgDP MGs are nontoxic up to 150 μg/mL against HEK293T cells while their reduced form is capable of capturing the heavy metal ions (Cu²⁺ and Hg²⁺) showing the potential of the developed system for moving toward sustainable agriculture.

Feasibility study of oxidized naringin as a novel crosslinking agent for crosslinking decellularized porcine Achilles tendon and its potential application for anterior cruciate ligament repair

Naringin (Nar), a natural flavanone glycoside, has been shown to possess a variety of biological activities, including anti-inflammatory, anti-apoptotic, bone formation, and so forth. In this study, Nar was oxidized by sodium periodate and the oxidized naringin (ONar) was used as a novel biological crosslinking agent. In addition, ONar-fixed porcine decellularized Achilles tendon (DAT) was developed to substitute anterior cruciate ligament (ACL) for researching a novel ACL replacement material. The ONar with a 24 h oxidation time had appropriate aldehyde group content, almost no cytotoxicity, and a good crosslinking effect. The critical characteristics and cytocompatibility of ONar-fixed DAT were also investigated. The results demonstrated that 1% ONar-fixed DAT exhibited good resistance to enzymatic degradation and thermal stability as well as suitable mechanical strength. Moreover, 1% ONar-fixed specimens exhibited excellent L929 fibroblasts-cytocompatibility and MC3T3-E1-cytocompatibility. They also promoted the secretion of hepatocyte growth factor (HGF) and basic fibroblast growth factor (bFGF) from fibroblasts and bone morphogenetic protein-2 (BMP-2) from osteoblasts. And they also showed the good anti-inflammatory properties in vivo experiments. Our data provided an experimental basis for ONar as a new cross-linking reagent in chemical modification of DAT and ONar-fixed DAT for ACL repair.

Preparation and Mechanism of Bio-Based Sodium Alginate Fibers with Flame Retardant and Antibacterial Properties

Flame retardant and antibacterial sodium alginate (SA) fiber were fabricated using the bio-based flame retardant of phytic acid and DL-arginine successively, and then the morphological structures, combustion behavior, thermal stability, and mechanical as well as antibacterial properties of SA fiber were investigated carefully. It is found that when the additional amount of PADL (reaction products of phytic acid and DL-arginine) in SA composite fiber is 20 wt%, its limiting oxygen index (LOI) is 40.0 ± 0.3%, and UL-94 is V-0 grade. The combustion behavior of composite fiber shows that PADL can effectively reduce combustion heat and promote carbon formation. Its peak of HRR (pkHRR) is 5.9% of pure SA fiber, and the residual carbon increases from 23.0 ± 0.1% to 44.2 ± 0.2%. At the same time, the density of the residual carbon increases gradually. PADL can promote SA to form expanded carbon with increasing density, and isolate the heat and volatilization of combustible gases. The guanidine group of DL-arginine can interact with the cell membrane to kill bacteria, and the antibacterial property of SA composite fiber is increased by 30%. This study provides a very ecological, safe, environmentally friendly and simple method to prepare flame retardant and antibacterial SA composite fiber with bio-based materials.

Synthesis and characterization of protocatechuic acid grafted carboxymethyl chitosan with oxidized sodium alginate hydrogel through the Schiff's base reaction

Excessive accumulation of free radicals is closely related to the occurrence and development of various neurodegenerative diseases. In this study, a novel protocatechuic acid grafted carboxymethyl chitosan with oxidized sodium alginate (PCA-g-CMCS/OSA) hydrogel was developed to maintain the oxidation-antioxidation balance activities. By optimizing the pH-soluble range (pH > 6.4) of CMCS, PCA was grafted onto CMCS skeleton via EDC/NHS, and then conjugated with aldehyde group of OSA to form Schiff's base hydrogel at physiological temperature. The gelation time can be adjusted rapidly within 1-3 min by controlling the content of OSA. The shaped hydrogel exhibited porous network structure with high porosity (>90 %), swelling ratio (2000-3000 %) and rheological property, which is beneficial to cell growth and proliferation. The conjugates preserved excellent DPPH and ABTS radicals scavenging abilities and adequate biodegradability within 5 weeks. Moreover, with the release of PCA monomer due to degradation of the PCA-g-CMCS/OSA, the hydrogel also exhibited excellent biocompatibility and protective effect on H2O2-induced oxidative damage in PC12 cells. These results suggested that the PCA-g-CMCS/OSA hydrogel would appear to be a more attractive candidate for potential biomedical applications such as antioxidant drug release and tissue engineering implant material.

A Self-Healing, Magnetic and Injectable Biopolymer Hydrogel Generated by Dual Cross-Linking for Drug Delivery and Bone Repair

Injectable hydrogels based on various functional biocompatible materials have made rapid progress in the field of bone repair. In this study, a self-healing and injectable polysaccharide-based hydrogel was prepared for bone tissue engineering. The hydrogel was made of carboxymethyl chitosan (CMCS) and calcium pre-cross-linked oxidized gellan gum (OGG) cross-linked by the Schiff-base reaction. Meanwhile, magnetic hydroxyapatite/gelatin microspheres (MHGMs) were prepared by the emulsion cross-linking method. The antibacterial drugs, tetracycline hydrochloride (TH) and silver sulfadiazine (AgSD), were embedded into the MHGMs. To improve the mechanical and biological properties of the hydrogels, composite hydrogels were prepared by compounding hydroxyapatite (HAp) and drug-embedded MHGMs. The physical, chemical, mechanical and rheological properties of the composite hydrogels were characterized, as well as in vitro antibacterial tests and biocompatibility assays, respectively. Our results showed that the composite hydrogel with 6% (w/v) HAp and 10 mg/mL MHGMs exhibited good magnetic responsiveness, self-healing and injectability. Compared with the pure hydrogel, the composite hydrogel showed a 38.8% reduction in gelation time (196 to 120 s), a 65.6% decrease in swelling rate (39.4 to 13.6), a 51.9% increase in mass residual after degradation (79.5 to 120.8%), and a 143.7% increase in maximum compressive stress (53.6 to 130.6 KPa). In addition, this composite hydrogel showed good drug retardation properties and antibacterial effects against both S. aureus and E. coli. CCK-8 assay showed that composite hydrogel maintained high cell viability (> 87%) and rapid cell proliferation after 3 days, indicating that this smart hydrogel is expected to be an alternative scaffold for drug delivery and bone regeneration. STATEMENT OF SIGNIFICANCE: Biopolymer hydrogels have been considered as the promising materials for the treatment of tissue engineering and drug delivery. Injectable hydrogels with and self-healing properties and responsiveness to external stimuli have been extensively investigated as cell scaffolds and bone defects, due to their diversity and prolonged lifetime. Magnetism has also been involved in biomedical applications and played significant roles in targeted drug delivery and anti-cancer therapy. We speculate that development of dual cross-linked hydrogels basing biopolymers with multi-functionalities, such as injectable, self-healing, magnetic and anti-bacterial properties, would greatly broaden the application for bone tissue regeneration and drug delivery.

Origin of critical nature and stability enhancement in collagen matrix based biomaterials: Comprehensive modification technologies

Collagen is the most abundant protein in animals and one of the most important extracellular matrices that chronically plays an important role in biomaterials. However, the major concern about native collagen is the lack of its thermal stability and weak resistance to proteolytic degradation. Currently, a series of modification technologies have been explored for critical nature and stability enhancement in collagen matrix-based biomaterials, and prosperously large-scale progress has been achieved. The establishment of covalent bonds among collagen noumenon has been verified assuringly to have pregnant influences on its physicochemical properties and biological properties, enlightening to discuss the disparate modification technologies on specific effects on the multihierarchical structures and pivotal performances of collagen. In this review, various existing modification methods were classified from a new perspective, scilicet whether to introduce exogenous substances, to reveal the basic scientific theories of collagen modification. Understanding the role of modification technologies in the enhancement of collagen performance is crucial for developing novel collagen-based biomaterials. Moreover, the different modification effects caused by the interaction sites between the modifier and collagen, and the structure-activity relationship between the structure of the modifier and the properties of collagen were reviewed.

Antibacterial dialdehyde sodium alginate/ε-polylysine microspheres for fruit preservation

Food security is an important global public health issue, which will not only endanger consumers' life and health, but also cause serious food waste. Herein, antibacterial dialdehyde sodium alginate/ε-polylysine microspheres (DSA-PL MPs) were developed to effectively prolong the shelf life of fruit. DSA was prepared by periodate oxidation of sodium alginate. Then the PL was conjugated onto DSA backbone via the Schiff's base reaction to synthesize DSA-PL conjugates, followed by the emulsification and Ca²⁺ ions crosslinking to obtain DSA-PL MPs. The results indicate that DSA-PL MPs show smooth spherical particle, relatively narrow size distribution and good dispersity. In vitro degradation rate of DSA-PL MPs is higher in acetate buffer (pH = 5.0) than that in PBS buffer (pH = 7.4), showing acid-sensitive degradation property. Significantly, DSA-PL MPs possess strong broad-spectrum antibacterial activity, which can effectively extend the shelf life of fruit. Overall, DSA-PL MPs possess promising application as antibacterial agents for fruit preservation.

Bridging-induced densification strategy based on biomass-derived aldehyde tanning integrated with terminal Al(III) crosslinking towards high-performance chrome-free leather production

Chrome-free leather manufacturing has been acknowledged as a desirable option to eliminate potential environmental and human health risks of conventional chrome tanning. This work applied a sequential bridging-induced densification strategy to produce high-performance chrome-free leather with high crosslinking density derived from the biomass-derived aldehyde (BAT) crosslinking (BAT tanning of leather), followed by terminal Al(III) crosslinking (TAC). The TAC conditions for BAT tanned leather were optimized and the results suggested that the optimized conditions were as follows: the fixation pH was 4.2, the pre-penetration time was 180 min, the fixation temperature was 40 °C, and the dosage of the aluminum tanning agent (ATA) was 0.5% (based on Al₂O₃). Under the optimized conditions, the resultant BAT-TAC crust leather exhibited favorable overall performances compared with BAT crust leather in terms of higher hydrothermal stability, mechanical strengths, more pleasant uniform color, and comparable smooth grain surface. The obtained high-performance chrome-free leather is scalable, providing an avenue for designing and rationalizing other engineering technology towards high-performance eco-leather production.

Fabrication of oxidized sodium alginate-collagen heterogeneous bilayer barrier membrane with osteogenesis-promoting ability

Guided bone regeneration technique is an effective approach to repair bone defects, in which a barrier membrane is essential. However, the collagen barrier membranes commonly used lose stability quickly, leading to connective tissue invasion and failure of osteogenesis. Herein, we presented an oxidized sodium alginate (OSA)-collagen heterogeneous bilayer barrier membrane with well-controlled pore size and osteogenesis-promoting ability. The OSA crosslinking significantly improved the structural stability, compressive strength, swelling behavior, and slowed down the biodegradation rate of collagen membranes. Meanwhile, the collagen-based membranes exhibited superior cytocompatibility, osteogenesis-promotion, and barrier function against fibroblasts. Especially, the osteogenic differentiation was most promoted on the membrane with a large pore size (240-310 μm), while the barrier function was most improved on the membrane with a small pore size (30-60 μm). Then the above two membranes were combined together to obtain a heterogeneous bilayer membrane. This bilayer barrier membrane showed excellent osteogenesis-promoting ability in rats.

Targeted Printing of Cells: Evaluation of ADA-PEG Bioinks for Drop on Demand Approaches

A novel approach, in the context of bioprinting, is the targeted printing of a defined number of cells at desired positions in predefined locations, which thereby opens up new perspectives for life science engineering. One major challenge in this application is to realize the targeted printing of cells onto a gel substrate with high cell survival rates in advanced bioinks. For this purpose, different alginate-dialdehyde—polyethylene glycol (ADA-PEG) inks with different PEG modifications and chain lengths (1–8 kDa) were characterized to evaluate their application as bioinks for drop on demand (DoD) printing. The biochemical properties of the inks, printing process, NIH/3T3 fibroblast cell distribution within a droplet and shear forces during printing were analyzed. Finally, different hydrogels were evaluated as a printing substrate. By analysing different PEG chain lengths with covalently crosslinked and non-crosslinked ADA-PEG inks, it was shown that the influence of Schiff’s bases on the viscosity of the corresponding materials is very low. Furthermore, it was shown that longer polymer chains resulted in less stable hydrogels, leading to fast degradation rates. Several bioinks highly exhibit biocompatibility, while the calculated nozzle shear stress increased from approx. 1.3 and 2.3 kPa. Moreover, we determined the number of cells for printed droplets depending on the initial cell concentration, which is crucially needed for targeted cell printing approaches.

Effect of Dialdehyde Carboxymethyl Cellulose Cross-Linking on the Porous Structure of the Collagen Matrix

Porous structures are essential for some collagen-based biomaterials and can be regulated by crosslinkers. Herein, dialdehyde carboxymethyl cellulose (DCMC) crosslinkers with similar size but different aldehyde group contents were prepared through periodate oxidation of sodium carboxymethyl cellulose with varying degrees of substitution (DS). They can penetrate into the hierarchy of fibril and form inter-molecular and intra-fibril cross-linking within the collagen matrix due to their nanoscale sizes and reactive aldehyde groups. The collagen matrices possessed higher porosity, significantly greater proportion of large pores (Φ > 10 μm), and shorter D-periodicity after cross-linking, showing greater potential for biomedical applications. In addition, the crosslinked collagen matrices showed satisfactory biocompatibility and biodegradation. The decreased DS of carboxymethyl cellulose, which led to the increased aldehyde content of corresponding DCMC, brought about an enhanced cross-linking degree, porosity, and proportion of large pores of the crosslinked collagen matrix. DCMC dosage of 6% was sufficient for cross-linking and pore formation. Excess DCMC would physically deposit in the matrix and decrease the porosity instead. Therefore, the desired pore properties of the collagen matrix could be obtained by regulating the structure of DCMC and thereby achieving the required functions of the biomaterial.

The modification of collagen with biosustainable POSS graft oxidized sodium alginate composite

As a kind of renewable biological resource, leather collagen is the raw material of leather industry. The chrome tanning modified collagen has high humidity and heat resistance, but there are some defects such as environmental pollution, harm to human health and shortage of chromium resources, so it is urgent to research chromium-free tanning to achieve clean modified colloidal. In the chromium-free tanning system, the modification of skin fibrin by bio-based material has the significance of environmental protection. Sodium alginate can be used as crosslinking agent to stabilize collagen. In this study, the polyhedral oligomeric silsesquioxane (POSS) grafted oxidized sodium alginate polymer composite (POSS-OSA-MAA) containing aldehyde group was prepared by two steps. Firstly, POSS grafted sodium alginate polymer composite (POSS-SAG-MAA) was prepared by graft polymerization with POSS, sodium alginate (SAG) and methacrylic acid (MAA) as raw materials. Then POSS-OSA-MAA was obtained by oxidation of POSS-SAG-MAA with sodium periodate. The aldehyde group highest concentration in POSS-OSA-MAA was 3.26 mmol•g-1, and the tanned leather shrinkage temperature was 73.1 °C. The X-ray photoelectron spectroscopy showed that POSS-OSA-MAA could form Schiff base structure with amino-containing substances and form multiple points crosslinking, and POSS-OSA-MAA could improve the shrinkage temperature and thermal stability of skin collagen.

Novel dopamine-modified oxidized sodium alginate hydrogels promote angiogenesis and accelerate healing of chronic diabetic wounds

Herein, the dopamine (DA) was grafted with oxidized sodium alginate (OSA) via Schiff base reduction reaction, aiming to fabricate novel DA-grafted OSA (OSA-DA) hydrogels with enhanced biocompatibility and suitable adhesion for clinical applications. The chemical structures of OSA-DA were characterized via UV-Vis, FTIR and ¹H NMR spectroscopy analysis. The hydrogel characteristics, biocompatibility, as well as the chronic diabetic wound healing efficacy were investigated. Our results demonstrated that DA was grafted with OSA successfully with highest grafting rate of 7.50%. Besides, OSA-DA hydrogels possessed suitable swelling ratio and appropriate adhesion characteristics. Additionally, OSA-DA exhibited satisfactory cytocompatibility and cell affinity in L-929 cells, and superior biocompatibility in SD rats. Moreover, OSA-DA exerted remarkable promoting effects on migration and tube formation of human umbilical vein endothelial cells (HUVECs). Studies on full-thickness excision chronic diabetic wounds further revealed that OSA-DA hydrogels could accelerate healing via promoting angiogenesis, reducing inflammation response, and stimulating collagen deposition. Overall, our studies would provide basis for SA-based hydrogels as clinical wound dressings.

Matrix Stiffness Potentiates Stemness of Liver Cancer Stem Cells Possibly via the Yes-Associated Protein Signal

A hepatocellular carcinoma tissue has mechanical heterogeneity, where the stiffness gradually increases from the core to the invasion front. Furthermore, there is evidence that stem cells from liver cancer (LCSCs) preferentially enrich the invasion front, exhibiting the stiffest modulus in the tumor. LCSCs have the features of stem/progenitor cells and play a vital part in liver cancer development. However, whether matrix stiffness affects LCSC stemness remains unclear. Here, we established a three-dimensional hydrogel for culturing LCSCs to simulate the stiffness of the core and the invasion front of a liver cancer tissue. The results showed that a stiffer matrix (72.2 ± 0.90 kPa) significantly potentiated LCSC stemness as compared with a soft matrix (7.7 ± 0.41 kPa). Moreover, Yes-associated protein signaling might mediate this promotion. Together, our findings illustrate the relationship between matrix stiffness and LCSC stemness, which may aid the production of novel treatment approaches against liver cancer.

Optimization of dialdehyde soluble soybean polysaccharide: preparation by response surface methodology for cleaner leather tanning

Leather is widely used in daily necessities, such as shoes and bags. Traditional chrome tanning might produce leathers with excellent mechanical and thermal properties but gives rise to problems, such as environmental pollution. To find an ecological alternative for chrome-tanning agents, soluble soybean polysaccharide (SSPS) was oxidized by sodium periodate to yield dialdehyde soluble soybean polysaccharide (DPA). By the response surface methodology (RSM)-based optimization of the preparation process, DPA was obtained at the optimized condition at the mass ratio of 1 : 1.9, oxidation time of 0.53 h, and oxidation temperature of 20 °C, and the hydrothermal shrinkage temperature of the DPA-tanned leather reached 79 °C. The Fourier transform infrared (FT-IR) spectra and gel permeation chromatography (GPC) showed that the aldehyde group was successfully introduced, and the molecular weight was significantly reduced. The DPA-tanned leather has good collagen fiber dispersion and mechanical properties and thus is suggested to be a green tanning agent for leather making.

Leather is widely used in daily necessities, such as shoes and bags.

A Well-Designed Two-Fold Crosslinked Biological Valve Leaflets with Heparin-Loaded Hydrogel Coating for Enhancing Anticoagulation, Endothelialization, and Anticalcification

Commercial biological valve leaflets (BVLs) crosslinked with Glutaraldehyde (GA) are at risk of accelerating damage and even failure, owing to high cell toxicity of GA, acute thrombosis, and calcification in...

A natural polysaccharide-based antibacterial functionalization strategy for liquid and air filtration membranes

Filtration membranes are widely applied in medical fields. However, these membranes are challenged by bacterial contamination in hospitals, which increases the risk of nosocomial infections. Thus, it is significant to develop antibacterial filtration membranes. In this work, an oxidated dextran (ODex)-based antibacterial coating was designed and constructed on microfiltration (MF) membranes and melt-blown fabrics. Polyhexamethylene guanidine (PHMG) was synthesized as an antibacterial agent, and was fixed by ODex onto filtration membranes. The functionalized MF membranes increased the filtration efficiency for E. coli from 20.9% to 99.9%, and improved the absorption ratio for endotoxin by 59.1%, while the water flow rate still remained as high as 5255 L (h m²)^-1. Furthermore, the trapped bacteria were inactivated by the antibacterial coating. For the melt-blown fabrics, the aerosol filtration efficiency was increased from 74.6% to 81.0%, and the antibacterial efficiency was promoted to 92.0%. The present work developed a facile and universal antibacterial functionalization strategy for filtration membranes, which provided a new method for the design and development of various novel antibacterial filtration materials in the medical field.

Synthesis and characterization of electroconductive hydrogels based on oxidized alginate and polypyrrole-grafted gelatin as tissue scaffolds

Electroconductive biocompatible hydrogels with tunable properties have extensively been taken into account in tissue engineering applications due to their potential to provide suitable microenvironmental responses for the cells. In the present study, novel electroconductive hydrogels are designed and synthesized by reacting oxidized alginate with polypyrrole-grafted gelatin copolymer (PPy-g-gelatin) via formation of a Schiff-base linkage. The influence of the composition and the concentration of the components on the compressive modulus and functional performance of the hydrogels is investigated. The conductivity of the hydrogels measured by a two-probe method increased by increasing the level of polypyrrole-grafted gelatin, and a conductivity of 0.7753 S m^-1 was exhibited by the hydrogel composed of 8% w/v polypyrrole-grafted gelatin (oxidized alginate:gelatin:polypyrrole-grafted gelatin; 30 : 35 : 35% v/v). The hydrogel compressive modulus was shown to be enhanced by increasing the total concentration of hydrogel. The characteristic features of the prepared hydrogels, including swelling ratio, volume fraction, cross-link density, and mesh size, are also studied and analyzed. Besides, the conductive hydrogels have a smaller mesh size and higher cross-link density than the non-conductive hydrogels. However, the hydrogels with high cross-link density, small mesh size, and large pore size presented higher electroconductivity as a result of easier movement of the ions throughout the hydrogel. These conductive hydrogels exhibited electrical conductivity and biodegradability with cell viability, implying potential as scaffolds for tissue engineering.

Pulsed Discharge Plasma in High-Pressure Environment for Water Pollutant Degradation and Nanoparticle Synthesis

The application of high-voltage discharge plasma for water pollutant decomposition and the synthesis of nanoparticles under a high-pressure argon gas environment (~4 MPa) was demonstrated. The experiments were carried out in a batch-type system at room temperature with a pulsed DC power supply (15.4 to 18.6 kV) as a discharge plasma source. The results showed that the electrode materials, the pulsed repetition rates, the applied number of pulses, and the applied voltages had a significant effect on the degradation reactions of organic compounds. Furthermore, carbon solid materials from glycine decomposition were generated during the high-voltage discharge plasma treatment under high-pressure conditions, while Raman spectra and the HRTEM images indicated that titanium dioxide with a brookite structure and titanium carbide nanoparticles were also formed under these conditions. It was concluded that this process is applicable in practice and may lead to advanced organic compound decomposition and metal-based nanoparticle synthesis technologies.

The Effect of Using Micro-Clustered Water as a Polymer Medium

The aim of the study was to investigate the changes within the physicochemical properties of gelatin, carrageenan, and sodium alginate hydrosols prepared on the basis of micro-clustered (MC) water. The rheological parameters, contact angle and antioxidant activity of hydrosols were investigated. Moreover, the pH, oxidation–reduction potential (ORP) and electrical conductivity (EC) were measured. The hydrosols with MC water were characterized by a lower pH, decreased viscosity, a lower contact angle, and only slightly lower antioxidant activity than control samples. The results showed that hydrosol’s properties are significantly changed by MC water, which can lead to enhancement of its applicability but requires further investigation.

Applications of oxidized alginate in regenerative medicine

Because of its ideal degradation rate and features, oxidized alginate (OA) is selected as an appropriate substitute and has been introduced into hydrogels, microspheres, 3D-printed/composite scaffolds, membranes, and electrospinning and coating materials. By taking advantage of OA, the OA-based materials can be easily functionalized and deliver drugs or growth factors to promote tissue regeneration. In 1928, it was first found that alginate could be oxidized using periodate, yielding OA. Since then, considerable progress has been made in the research on the modification and application of alginate after oxidation. In this article, we summarize the key properties and existing applications of OA and various OA-based materials and discuss their prospects in regenerative medicine.

Investigations on the general properties of biomass-based aldehyde tanned sheep fur for its selective post-tanning processing

Abstract

Dialdehyde sodium alginate (DSA) is an alternative chrome-free tanning material for fur production. To obtain satisfactory resultant fur and provide suggestions for the usage of DSA in fur making, the general properties of DSA tanned sheep fur were systematically investigated. The tanning mechanism of DSA was analyzed and it was verified that DSA was mainly combined with collagen fiber by forming Schiff base covalent bonds while supplemented by a small number of hydrogen bonds and ionic bonds. Due to the acid sensitivity of Schiff base structure, DSA tanned fur had poor resistance to acid rinsing but had excellent resistance to washing and good fatliquoring performance. Also, it had good resistances to yellowing and reductant. After being retanned by chrome tanning agent, the fur was capable of enduring a high-temperature dyeing process (68 °C for 8 h). Overall, DSA tanned sheep fur had favorable properties under appropriate post-tanning processing conditions to manufacture light-colored or dark-colored fur products with desirable physical properties.

Graphical abstract