One-step hydrothermal synthesis of fluorescent nanocrystalline cellulose/carbon dot hydrogels

Green Synthesis of Carbon Nanodots (CNDs) Moderated by Flavonoid Extracts from Moringa oleifera Leaves and Co-Doped Sulfur/Nitrogen (NS - CNDs - Fla) and Their Potential for Heavy Metals Sensing Application

Carbon nano dots (CNDs) has received a lot of attention in recent years due to their potential use in various kinds of applications. Many conventional chemical methods have been used to synthesis CNDs, but these processes have several drawbacks, such as hazardous by products, harsh chemicals, and high costs. To overcome these issues, green chemistry has an importance in the development of CNDs. Thus, it is essential to explore green synthesis approaches for production the CNDs. In this context, a novel precursor using flavonoid extraction from Moringa oleifera leaves is proposed. Moringa oleifera is the "magic tree" which contains many bioactive compounds such as flavonoids, especially in its leaves. Natural flavonoids and glycosides with specific components of structure can bind to metal ions. The content of bioactive compounds such as total flavonoids found in Moringa oleifera leaves is 172.10 mg/g. In addition, carbon (47.34%), nitrogen (51.67%), and sulfur (0.99%) are also the main composition. Then, the carbon nanodots (CNDs) synthesized in this research were moderated by flavonoid extract from Moringa oleifera using the hydrothermal method. The technique is easy, ecologically friendly, and requires neither specialized device or reagents. In practice, the CNDs produced are almost circular, with an average diameter of 3.49 nm. Furthermore, we enhanced synthesis CNDs - Fla with heteroatoms of nitrogen (N) and sulfur (S). They display a broad excitation-emission spectrum, excitation-dependent emission, and extraordinary fluorescence. Therefore, the synthesis of CNDs using flavonoids from Moringa oleifera as precursors would be a great potential candidate for the development of novel types of heavy metals sensing.

Synthesis of fluorometric carbon nano dots(CNDs) for selective sensing of biologically important Fe3+ and Cu2+ metal ions and evaluating their antioxidant capacity

In this research, CNDs were prepared by a green and cost effective method using Cinnamomum Tamala (bay leaf) as carbon sources. TEM, UV, FTIR, ZETA Potential, PL and Fluorescence methods were used to characterize the produced CNDs and the average particle size is 3.42 nm. This research was conducted on the development of fluorescent sensors for various metal ions, including Fe3+, Cu2+, Zn2+, Ni2+, Pb2+, Cr3+, Mg2+, Na+ 1 and Cd2+. The CNDs demonstrated selective sensing of biologically important Fe+ 3 and Cu+ 2 metal ions. The CNDs antioxidant assay was tasked with DPPH• radical scavenging properties. CNDs made from Cinnamomum Tamala had the highest DPPH free radical scavenging activity at 100 mg/L (42.06%) with the IC50 of 130.68 mg/L. The outcome implies that Indian spices are among the best materials for optical metal ion detection and sensing, and they also have therapeutic benefits.

Carbon Dots Derived from Non-Biomass Waste: Methods, Applications, and Future Perspectives

Carbon dots (CDs) are luminescent carbon nanoparticles with significant potential in analytical sensing, biomedicine, and energy regeneration due to their remarkable optical, physical, biological, and catalytic properties. In light of the enduring ecological impact of non-biomass waste that persists in the environment, efforts have been made toward converting non-biomass waste, such as ash, waste plastics, textiles, and papers into CDs. This review introduces non-biomass waste carbon sources and classifies them in accordance with the 2022 Australian National Waste Report. The synthesis approaches, including pre-treatment methods, and the properties of the CDs derived from non-biomass waste are comprehensively discussed. Subsequently, we summarize the diverse applications of CDs from non-biomass waste in sensing, information encryption, LEDs, solar cells, and plant growth promotion. In the final section, we delve into the future challenges and perspectives of CDs derived from non-biomass waste, shedding light on the exciting possibilities in this emerging area of research.

Light-Mediated Polymerization Catalyzed by Carbon Nanomaterials

Carbon nanomaterials, specifically carbon dots and carbon nitrides, play a crucial role as heterogeneous photoinitiators in both radical and cationic polymerization processes. These recently introduced materials offer promising solutions to the limitations of current homogeneous systems, presenting a novel approach to photopolymerization. This review highlights the preparation and photocatalytic performance of these nanomaterials, emphasizing their application in various polymerization techniques, including photoinduced i) free radical, ii) RAFT, iii) ATRP, and iv) cationic photopolymerization. Additionally, it discusses their potential in addressing contemporary challenges and explores prospects in this field. Moreover, carbon nitrides, in particular, exhibit exceptional oxygen tolerance, underscoring their significance in radical polymerization processes and allowing their applications such as 3D printing, surface modification of coatings, and hydrogel engineering.

Recent studies on proteins and polysaccharides-based pH-responsive fluorescent materials

Polymer-based pH-responsive fluorescent materials have the characteristics of fast response, real-time monitoring, visualisation, and easy forming. Consequently, they have attracted widespread attention in wound healing, sweat monitoring, security and anti-counterfeiting, freshness detection of aquatic products, metal-ion sensing and bioimaging. This paper analyses the preparation principles and characteristics of pH-responsive fluorescent materials based on cellulose, chitosan and proteins. It then outlines the fluorescence properties, environmental response mechanisms and applications of various luminescent materials. Next, the research indicates that amines, N-heterocyclic rings, carboxyl groups and amino plasmonic groups on the fluorescent molecule structure and polymer skeleton appear to change the degree of ionisation under acid or alkali stimulation, which affects the light absorption ability of chromophore electrons, thus producing fluorescence changes in fluorescent materials under different pH stimuli. On this basis, the challenges and growth encountered in the development of proteins and polysaccharides-based pH-responsive fluorescent materials were prospected to provide theoretical references and technical support for constructing pH-responsive fluorescent materials with high stability, high sensitivity, long-lasting pH-response and wide detection range.

Carbon Quantum Dots/Cu2O Photocatalyst for Room Temperature Selective Oxidation of Benzyl Alcohol

The luminescence properties and excellent carrier transfer ability of carbon quantum dots (CQDs) have attracted much attention in the field of photocatalysis. In this work, we loaded the CQDs on the surface of Cu2O to enhance the visible-light property of Cu2O. Furthermore, the composite was used for selective oxidation of benzyl alcohol to benzaldehyde. The composite catalyst achieved high selectivity (90%) for benzaldehyde at room temperature, leveraging its visible-light-induced electron transfer properties and its photocatalytic activity for hydrogen peroxide decomposition. ·OH was shown to be the main reactive oxygen species in the selective oxidation reaction of benzyl alcohol. The formation of heterostructures of CQDs/Cu2O promoted charge carrier separation and provided a fast channel for photoinduced electron transfer. This novel material exhibited enhanced levels of activity and stability for selective oxidation of benzyl alcohol. Potential applications of carbon quantum dot composites in conventional alcohol oxidation reactions are shown.

Potential Efficacy of Herbal Medicine-Derived Carbon Dots in the Treatment of Diseases: From Mechanism to Clinic

Carbon dots (CDs), a crucial component of nanomaterials, are zero-dimensional nanomaterials with carbon as the backbone structure and smaller than 10 nm. Due to their beneficial characteristics, they are widely used in biomedical fields such as biosensors, drug delivery, bio-imaging, and interactions with DNA. Interestingly, a novel type of carbon dot, generated by using herbal medicines as synthetic raw materials, has emerged as the most recent incomer in the family of CDs with the extensive growth in the number of materials selected for carbon dots synthesis. Herbal medicine-derived carbon dots (HM-CDs) have been employed in the biomedical industry, and are rapidly emerging as "modern nanomaterials" due to their unique structures and exceptional capabilities. Emerging trends suggest that their specific properties can be used in bleeding disorders, gastrointestinal disorders, inflammation-related diseases, and other common intractable diseases including cancer, menopausal syndrome, central nervous system disorders, and pain of various forms and causes. In addition, HM-CDs have been found to have organ-protective and antioxidant properties, as evidenced by extensive studies. This research provides a more comprehensive understanding of the biomedical applications of HM-CDs for the aforementioned disorders and investigates the intrinsic pharmacological activities and mechanisms of these HM-CDs to further advance their clinical applications.

Lignocellulosic Biomass-Based Carbon Dots: Synthesis Processes, Properties, and Applications

Carbon dots (CDs), a new type of carbon-based fluorescent nanomaterial, have attracted widespread attention because of their numerous excellent properties. Lignocellulosic biomass is the most abundant renewable natural resource and possesses broad potential to manufacture different composite and smart materials. Numerous studies have explored the potential of using the components (such as cellulose, hemicellulose, and lignin) in lignocellulosic biomass to produce CDs. There are few papers systemically aiming in the review of the state-of-the-art works related to lignocellulosic biomass-derived CDs. In this review, the significant advances in synthesis processes, formation mechanisms, structural characteristics, optical properties, and applications of lignocellulosic biomass-based CDs such as cellulose-based CDs, hemicellulose-based CDs and lignin-based CDs in latest research are reviewed. In addition, future research directions on the improvement of the synthesis technology of CDs using lignocellulosic biomass as raw materials to enhance the properties of CDs are proposed. This review will serve as a road map for scientists engaged in research and exploring more applications of CDs in different science fields to achieve the highest material performance goals of CDs.

Nanocellulose-based porous materials: Regulation and pathway to commercialization in regenerative medicine

We review the recent progress that have led to the development of porous materials based on cellulose nanostructures found in plants and other resources. In light of the properties that emerge from the chemistry, shape and structural control, we discuss some of the most promising uses of a plant-based material, nanocellulose, in regenerative medicine. Following a brief discussion about the fundamental aspects of self-assembly of nanocellulose precursors, we review the key strategies needed for material synthesis and to adjust the architecture of the materials (using three-dimensional printing, freeze-casted porous materials, and electrospinning) according to their uses in tissue engineering, artificial organs, controlled drug delivery and wound healing systems, among others. For this purpose, we map the structure-property-function relationships of nanocellulose-based porous materials and examine the course of actions that are required to translate innovation from the laboratory to industry. Such efforts require attention to regulatory aspects and market pull. Finally, the key challenges and opportunities in this nascent field are critically reviewed.

Turning food waste into value-added carbon dots for sustainable food packaging application: A review

Carbon dots (CDs) are a recent addition to the nanocarbon family, encompassing both crystalline and amorphous phases. They have sparked significant research interest due to their unique electrical and optical properties, remarkable biocompatibility, outstanding mechanical characteristics, customizable surface chemistry, and negligible cytotoxicity. Their current applications are mainly limited to flexible photonic and biomedical devices, but they have also garnered attention for their potential use in intelligent packaging. The conversion of food waste into CDs further contributes to the concept of the circular economy. It provides a comprehensive overview of emerging green technologies, energy-saving reactions, and cost-effective starting materials involved in the synthesis of CDs. It also highlights the unique properties of biomass-derived CDs, focusing on their structural performance, cellular toxicity, and functional characteristics. The application of CDs in the food industry, including food packaging, is summarized in a concise manner. This paper sheds light on the current challenges and prospects of utilizing CDs in the packaging industry. It aims to provide researchers with a roadmap to tailor the properties of CDs to suit specific applications in the food industry, particularly in food packaging.

A Comprehensive Review of Polysaccharide-Based Hydrogels as Promising Biomaterials

Polysaccharides have emerged as a promising material for hydrogel preparation due to their biocompatibility, biodegradability, and low cost. This review focuses on polysaccharide-based hydrogels' synthesis, characterization, and applications. The various synthetic methods used to prepare polysaccharide-based hydrogels are discussed. The characterization techniques are also highlighted to evaluate the physical and chemical properties of polysaccharide-based hydrogels. Finally, the applications of SAPs in various fields are discussed, along with their potential benefits and limitations. Due to environmental concerns, this review shows a growing interest in developing bio-sourced hydrogels made from natural materials such as polysaccharides. SAPs have many beneficial properties, including good mechanical and morphological properties, thermal stability, biocompatibility, biodegradability, non-toxicity, abundance, economic viability, and good swelling ability. However, some challenges remain to be overcome, such as limiting the formulation complexity of some SAPs and establishing a general protocol for calculating their water absorption and retention capacity. Furthermore, the development of SAPs requires a multidisciplinary approach and research should focus on improving their synthesis, modification, and characterization as well as exploring their potential applications. Biocompatibility, biodegradation, and the regulatory approval pathway of SAPs should be carefully evaluated to ensure their safety and efficacy.

Rhenium-Based Electrocatalysts for Water Splitting

Due to the contamination and global warming problems, it is necessary to search for alternative environmentally friendly energy sources. In this area, hydrogen is a promising alternative. Hydrogen is even more promising, when it is obtained through water electrolysis operated with renewable energy sources. Among the possible devices to perform electrolysis, proton exchange membrane (PEM) electrolyzers appear as the most promising commercial systems for hydrogen production in the coming years. However, their massification is affected by the noble metals used as electrocatalysts in their electrodes, with high commercial value: Pt at the cathode where the hydrogen evolution reaction occurs (HER) and Ru/Ir at the anode where the oxygen evolution reaction (OER) happens. Therefore, to take full advantage of the PEM technology for green H2 production and build up a mature PEM market, it is imperative to search for more abundant, cheaper, and stable catalysts, reaching the highest possible activities at the lowest overpotential with the longest stability under the harsh acidic conditions of a PEM. In the search for new electrocatalysts and considering the predictions of a Trasatti volcano plot, rhenium appears to be a promising candidate for HER in acidic media. At the same time, recent studies provide evidence of its potential as an OER catalyst. However, some of these reports have focused on chemical and photochemical water splitting and have not always considered acidic media. This review summarizes rhenium-based electrocatalysts for water splitting under acidic conditions: i.e., potential candidates as cathode materials. In the various sections, we review the mechanism concepts of electrocatalysis, evaluation methods, and the different rhenium-based materials applied for the HER in acidic media. As rhenium is less common for the OER, we included a section about its use in chemical and photochemical water oxidation and as an electrocatalyst under basic conditions. Finally, concluding remarks and perspectives are given about rhenium for water splitting.

Synthesis and application of fluorescent N-doped carbon dots/hydrogel composite for Cr(VI) adsorption: Uncovering the ion species transformation and fluorescent quenching mechanism

A fluorescent composite material fabricated from nitrogen-doped carbon dots with polyvinyl alcohol (PVA)/polyvinylpyrrolidone (PVP)/citric acid (CA) hydrogel was synthesized using a microwave-assisted hydrothermal method. The composite was used as a metal ion sensor and adsorbent to remove chromium (Cr(VI)) from water. The chemical structure and Cr(VI) removal performance of the fluorescent composite films were also characterized. Fluorescent quenching upon Cr(VI) adsorption showed that Cr(VI) binding was attributed to the N-doped carbon dots. The results were confirmed by several analytical techniques, including X-ray photoelectron spectroscopy (XPS), Fourier transform infrared spectroscopy (FTIR) and X-ray absorption spectroscopy (XAS). The mechanism of Cr(VI) removal from water by the fluorescent composite film was based on the adsorption and subsequent reduction of N-doped carbon dots within the 3D porous composite film. XPS measurements showed that 53.2% Cr(III) and 46.8% Cr(VI) were present on the composite surface after Cr(VI) adsorption. Moreover, XAS revealed a change in the oxidation state of Cr(VI) to Cr(III) after adsorption and in the Cr-O bond length (1.686 Å to 2.284 Å) after reduction. The Cr(VI) adsorption capacity of the composite film was 4.90 mg g^-1 at pH 4 and fit the pseudo-second-order kinetic and Freundlich models. The results of this study could be used as a platform to further apply CDs/HD composites to remove Cr(VI) from water sources.

Polysaccharide-based C-dots and polysaccharide/C-dot nanocomposites: fabrication strategies and applications

C-dots are a new class of materials with vast applications. The synthesis of bio-based C-dots has attracted increasing attention in recent years. Polysaccharides being the most abundant natural materials with high biodegradability and no toxicity have been the focus of researchers for the synthesis of C-dots. C-dots obtained from polysaccharides are generally fabricated via thermal procedures, carbonization, and microwave pyrolysis. Small size, photo-induced electron transfer (PET), and highly adjustable luminosity behavior are the most important physical and chemical properties of C-dots. However, C-dot/polysaccharide composites can be introduced as a new generation of composites that combine the features of both C-dots and polysaccharides having a wide range of applications in biomedicines, biosensors, drug delivery systems, etc. This review demonstrates the features, raw materials, and methods used for the fabrication of C-dots derived from different polysaccharides. Furthermore, the properties, applications, and synthesis conditions of various C-dot/polysaccharide composites are discussed in detail.

Carboxymethylcellulose/agar-based functional film incorporated with nitrogen-doped polyethylene glycol-derived carbon dots for active packaging applications

The present investigation demonstrates the role of nitrogen doping on polyethylene glycol (PEG)-derived carbon dots on optical, antibacterial, and antioxidant activity. CDs' average size and surface charge were determined using transmission electron microscopy (TEM) and a zeta sizer with 2.14 ± 0.6 nm and -20 mV, respectively. Though CDs without N-doping (PCD) did not show any significant antioxidant and antimicrobial activities, the CDs doped with nitrogen (NPCD) showed potent antioxidant (25% and 100% DPPH and ABTS radical scavenging activity) and significant antimicrobial activity against Gram-positive (1.8 cm inhibition zone) and Gram-negative (1.4 cm) bacteria. Both carbon dots were loaded into the carboxymethyl cellulose (CMC)/agar-based film with different concentrations (4 and 8%) and showed a significant increase in the physicochemical properties, and UV-blocking property was increased from 53.7 to 79.9% without sacrificing the transparency. The NPCD-loaded film also showed high antioxidant (DPPH 12.7% and ABTS 67%) and potent antibacterial activity. In particular, the CMC/agar film loaded with 8% NPCD destroyed Escherichia coli and Listeria monocytogenes completely after 6 h of incubation.

The Role of N and S Doping on Photoluminescent Characteristics of Carbon Dots from Palm Bunches for Fluorimetric Sensing of Fe3+ Ion

This work aims to enhance the value of palm empty fruit bunches (EFBs), an abundant residue from the palm oil industry, as a precursor for the synthesis of luminescent carbon dots (CDs). The mechanism of fIuorimetric sensing using carbon dots for either enhancing or quenching photoluminescence properties when binding with analytes is useful for the detection of ultra-low amounts of analytes. This study revealed that EFB-derived CDs via hydrothermal synthesis exceptionally exhibited luminescence properties. In addition, surface modification for specific binding to a target molecule substantially augmented their PL characteristics. Among the different nitrogen and sulfur (N and S) doping agents used, including urea (U), sulfate (S), p-phenylenediamine (P), and sodium thiosulfate (TS), the results showed that PTS-CDs from the co-doping of p-phenylenediamine and sodium thiosulfate exhibited the highest PL properties. From this study on the fluorimetric sensing of several metal ions, PTS-CDs could effectively detect Fe3+ with the highest selectivity by fluorescence quenching to 79.1% at a limit of detection (LOD) of 0.1 µmol L−1. The PL quenching of PTS-CDs was linearly correlated with the wide range of Fe3+ concentration, ranging from 5 to 400 µmol L−1 (R2 = 0.9933).

An Overview on Recent Progress of the Hydrogels: From Material Resources, Properties to Functional Applications

Hydrogels, as the most typical elastomer materials with three-dimensional network structures, have attracted wide attention owing to their outstanding features in fields of sensitive stimulus response, low surface friction coefficient, good flexibility and bio-compatibility. Because of numerous fresh polymer materials (or polymerization monomers), hydrogels with various structure diversities and excellent properties are emerging, and the development of hydrogels is very vigorous over the past decade. This review focuses on state-of-the-art advances, systematically reviews the recent progress on construction of novel hydrogels utilized several kinds of typical polymerization monomers, and explores the main chemical and physical cross-linking methods to develop the diversity of hydrogels. Following the aspects mentioned above, the classification and emerging applications of hydrogels, such as pH response, ionic response, electrical response, thermal response, biomolecular response, and gas response, are extensively summarized. Finally, we have done this review with the promises and challenges for the future evolution of hydrogels and their biological applications. cross-linking methods; functional applications; hydrogels; material resources This article is protected by copyright. All rights reserved.

Effective Adsorption and Sensitive Detection of Cr(VI) by Chitosan/Cellulose Nanocrystals Grafted with Carbon Dots Composite Hydrogel

Due to its lethal effect on the human body and other creatures, Cr(VI) ions have attained widespread public attention, and an effective adsorbent for removing Cr(VI) ions is vital. Chitosan (CS)/cellulose nanocrystals grafted with carbon dots (CNCD) composite hydrogel with strong sorption ability and sensitive detection ability for Cr(VI) was formed. The cellulose nanocrystals (CN) offered a natural skeleton for assembling 3D porous structures, and then improved the sorption ability for Cr(VI); moreover, carbon dots (CD) acted as a fluorescent probe for Cr(VI) and provided Cr(VI) adsorption sites. With a maximum adsorption capacity of 217.8 mg/g, the CS/CNCD composite hydrogel exhibited efficient adsorption properties. Meanwhile, with a detection limit of 0.04 μg/L, this hydrogel was used for selective and quantitative detection of Cr(VI). The determination of Cr(VI) was based on the inner filter effect (IFE) and static quenching. This hydrogel retained its effective adsorption ability even after four repeated regenerations. Furthermore, the economic feasibility of the CS/CNCD composite hydrogel over activated carbon was confirmed using cost analysis. This study provided one new method for producing low-cost adsorbents with effective sorption and sensitive detection for Cr(VI).

Herbal medicine derived carbon dots: synthesis and applications in therapeutics, bioimaging and sensing

Since the number of raw material selections for the synthesis of carbon dots (CDs) has grown extensively, herbal medicine as a precursor receives an increasing amount of attention. Compared with other biomass precursors, CDs derived from herbal medicine (HM-CDs) have become the most recent incomer in the family of CDs. In recent ten years, a great many studies have revealed that HM-CDs tend to be good at theranostics without drug loading. However, the relevant development and research results are not systematically reviewed. Herein, the origin and history of HM-CDs are outlined, especially their functional performances in medical diagnosis and treatment. Besides, we sort out the herbal medicine precursors, and analyze the primary synthetic methods and the key characteristics. In terms of the applications of HM-CDs, medical therapeutics, ion and molecular detection, bioimaging, as well as pH sensing are summarized. Finally, we discuss the crucial challenges and future prospects.

Recent studies on cellulose-based fluorescent smart materials and their applications: A comprehensive review

The progress of bio-based fluorescent smart materials and their multifunctional applications have attained increasing interest in the recent decades. Cellulose is among the cheapest and widespread raw material on earth which can be modified into diverse useful materials. This review summarizes the chemical modification of cellulose into smart fluorescent materials. This further highlights on the fabrication of the prepared fluorescent materials into films, fibers, paper strips, carbon dots, hydrogels and solutions which are applied for the sensing of toxic metals and anions, pH, bioimaging, common organic solvents, aliphatic and aromatic amines, nitroaromatics, fluorescent printing, coating, and anti-counterfeiting applications. Finally, the discussion about the upcoming investigations, challenges, and options open for the cellulose-based luminescence sensors are communicated. We believe that this review will appeal more and more attention and curiosity for the chemists, biochemists, and chemical engineers working with the synthesis of cellulose-based fluorescent materials for widespread applications.

Multi-functionalized carbon aerogels derived from chitosan

Carbon aerogels are prepared by a thermal treating-freeze drying approach from chitosan, with glycine hydrochloride ionic liquid (IL) acting as solvent and nitrogen source. Different post-treatments such as ball milling and high temperature carbonization are employed to functionalize the obtained carbon aerogels with tuned properties, making it promising candidates as fluorescence material (NACs-Q), electrode material (FDC-800) and catalyst support (NAC_Pd-C). NACs-Q is water-soluble quantum dot with average particle sizes of 3.8 nm, presenting excitation-/emission-independent and pH-sensitive properties, which could be used as sensor for testing acetone vapor or an "on-off-on" sensor for detections of Fe³⁺ and vitamin C in fruits. FDC-800 exhibits fluffy lamellar structure with developed micro-mesopores and nitrogen-containing groups on their surfaces, which is beneficial for building flexible solid-state supercapacitor with excellent performance, delivering a capacitance of 208F/g at 0.5 A/g, and achieving an energy density of 7.2 W h/kg at a power density of 50 W/kg. Moreover, NAC_Pd-C can be used as catalyst for phenol hydrogenation, and phenol conversion of 100% with cyclohexanone selectivity of 98.3% is achieved, due to the synergetic effects of the Pd active-site, the N-containing groups, and the Lewis acid sites on the support.

Influence of carbon dot synthetic parameters on photophysical and biological properties

Recently, carbon dots (CDs) have been widely investigated for biological applications in imaging. One-step hydrothermal synthesis is considered to be one of the most promising methods for the synthesis of CDs, due to its simple and rapid manipulation, flexible selection of ingredients, environmentally friendly conditions, and low-cost. A number of synthetic and post-synthetic parameters, including solvent, heating time, dopant quantity, and particle size distribution, play a crucial role in controlling the size and surface structure of CDs, which ultimately have influence on their photophysical and biological behavior. Despite the crucial role of each of these parameters in defining the yield and nature of synthesized CDs, they have not previously been rigorously optimized, particularly with respect to desired biological applications. Herein, we report our comprehensive optimization of the parameters employed for the hydrothermal synthesis of CDs to gain a better understanding of the effect of these parameters on optical properties, cytotoxicity, and cellular uptake efficiency. Furthermore, this work will open up new pathways toward the design of CDs with physiochemical properties tailored for specific biomedical applications such as bioimaging.

Wood-Derived Carbon Materials and Light-Emitting Materials

Wood is a sustainable and renewable material that naturally has a hierarchical structure. Cellulose, hemicellulose, and lignin are the three main components of wood. The unique physical and chemical properties of wood and its derivatives endow them with great potential as resources to fabricate advanced materials for use in bioengineering, flexible electronics, and clean energy. Nevertheless, comprehensive information on wood-derived carbon and light-emitting materials is scarce, although much excellent progress has been made in this area. Here, the unique characteristics of wood-derived carbon and light-emitting materials are summarized, with regard to the fabrication principles, properties, applications, challenges, and future prospects of wood-derived carbon and light-emitting materials, with the aim of deepening the understanding and inspiring new ideas in the area of advanced wood-based materials.

Robust versatile nanocellulose/polyvinyl alcohol/carbon dot hydrogels for biomechanical sensing

A new type of nanocellulose/poly(vinyl alcohol)/carbon dot (NPC) multifunctional hydrogel was successfully fabricated by an one-step in-situ hydrothermal method. The one-pot strategy led to the formation of a complex hydrogen bonding/dynamic boric acid ester/nitrogen-doped carbon dots network, and endowed the hydrogel with multifunctionality. The hydrogel underwent self-healing at room temperature (25 °C) and exhibited double-emission fluorescence and high mechanical strength (tensile strength of up to 2.98 MPa). An NPC hydrogel-based capacitive sensor exhibited remarkable linear capacitance responsiveness toward pressure, strain, and glucose concentration, and enabled real-time synchronous quantitative pressure/glucose sensing with multiple linear correlations, which was a key performance criteria for biomechanical sensors. The versatility and multiple advantages of the as-prepared hydrogel demonstrate the potential of biological-mechanical sensing materials using natural cellulosic biomass.

Stimulus-responsive luminescent hydrogels: Design and applications

Luminescent hydrogels are emerging soft materials with applications in photoelectric, biomedicine, sensors and actuators, which are fabricated via covalently conjugation of luminophors to hydrogelators or physical loading of luminescent organic/inorganic materials into hydrogel matrices. Due to the intrinsic stimulus-responsiveness for hydrogels such as thermo-, pH, ionic strength, light and redox, luminescent hydrogels could respond to external physical or chemical stimuli through varying the luminescent properties such as colors, fluorescent intensity and so on, affording diverse application potential in addition to the pristine individual hydrogels or luminescent materials. Based on the rapid development of such area, here we systematically summarize and discuss the design protocols, properties as well as the applications of stimulus-responsive luminescent hydrogels. Because of the stimuli-responsiveness, biocompatibility, injectable and controllability of luminescent hydrogels, they are widely used as functional smart materials. We illustrate the applications of luminescent hydrogels. The future developments about luminescent hydrogels are also presented.

Eco-Friendly Sustainable Fluorescent Carbon Dots for the Adsorption of Heavy Metal Ions in Aqueous Environment

The materials and substances required for sustainable water treatment by adsorption technique, are still being researched widely by distinguished classes of researchers. Thus, the need to synthesize substances that can effectively clean up pollutants from the environment cannot be overemphasized. So far, materials in bulk forms that are rich in carbon, such as biochar and varieties of activated carbon have been used for various adsorptive purposes. The use of bulk materials for such purposes are not efficient due to minimal surface areas available for adsorption. This study explores the adsorption task at nano dimension using carbon dots (CDs) from tapioca. The properties of carbon structure and its influence on the adsorptive efficacy of carbon nanoparticles were investigated by energy-dispersive spectroscopy (EDS), X-ray photoelectron spectroscopy (XPS), Fourier transform infrared spectroscopy (FTIR), high resolution transmission electron microscopy (HrTEM), and atomic force microscopy (AFM). The results implied carbon present in CDs are good adsorbents for effective adsorption of heavy metal ions (lead) with removal efficiency of 80.6% in aqueous environment. The adsorption process as explored by both Langmuir and Freundlich isotherms have proven favorability of the adsorption process. Langmuir form two and three have correlation coefficients R2 at 0.9922 and 0.9912, respectively. The Freundlich isotherm confirms CDs as having defined surface heterogeneity and the exponential distribution of active sites. The adsorption of lead unto CDs obeyed the second order kinetic model with coefficient of determination, R2 of 0.9668 and 0.9996 at an initial lead concentration of 20 mg/L and 100 mg/L, respectively. The findings validated the efficiency of CDs derived from tapioca as an excellent material for further utilization in the environmental fields of wastewater pollution detection and clean up, bio-imaging, and chemical sensing applications.

Polyaromatic hydrocarbon inner-structured carbon nanodots for interfacial enhancement of carbon fiber composite

It is well known that carbon substances with a polyaromatic hydrocarbon (PAH) inner structure only form at high temperature. In this work, we introduce fabrication of massive and PAH inner-structured carbon nanodots (CNDs) via hydrothermal treatment of glucose aqueous solution in the monolithic methyl silicone hydrogel at 200 °C. During the carbonization process, all the precursor solution is confined in nano-vessels (2–20 nm) of the thermostable methyl silicone hydrogel, thus forming CNDs without aggregation. The resulting CNDs, with a yield of 65%, were separated facilely and characterized using various spectroscopy and microscopy techniques. The glucose-derived CNDs have diameters of 2–5 nm and contain 18.9 wt% carboxyl groups, and their aqueous solubility depends on the pH. The CNDs consist of large PAH clusters, confirmed by solid-state ¹³C NMR, which were different to other reported carbon substances prepared at similar low temperatures. The formation mechanism of the PAH structure in the CNDs probably relates to the high interfacial energy of the prewetted superhydrophobic methyl silicone nano-framework in the hydrogel. Moreover, the tunable fluorescence properties of the CNDs prepared using this method can be attributed to the arene carboxylic groups in the CNDs. Finally, the resultant PAH CNDs with abundant groups were applied as a sizing in carbon fiber (CF) composite fabrication, resulting in an obvious interface enhancement of the CF/epoxy composite.

Aggregation-free fabrication of polyaromatic hydrocarbon inner-structured carbon nanodots via hydrothermal treatment of the glucose aqueous solution in the monolithic methyl silicone hydrogel is introduced.

A biodegradable biomass-based polymeric composite for slow release and water retention

Slow-release fertilizer has been proven to be more effective than traditional fertilizer for providing a long-term stable nutrient supply. Although such fertilizers have been widely investigated, their water-retention properties and biodegradability have not been fully analysed. Composites of fertilizers and polymers provide opportunities to prepare new types of fertilizer with enhanced properties for real applications. Chicken feather protein-graft-poly(potassium acrylate)-polyvinyl alcohol semi-interpenetrating networks forming a super absorbent resin combined with nitrogen (N) and phosphorus (P) (CFP-g-PKA/PVA/NP semi-IPNs SAR) was prepared. The chemically bonded or physically embedded fertilizer compound could be released form the resin matrix to the surrounding soil under irrigation. The synthesis mechanism, morphology, and chemical and mechanical structure of the synthesized composites were investigated. The reactant doses were optimized through response surface methodology (RSM). A 30-day field trial of the prepared SAR was applied to detect the influence of sample particle size, soil salinity, pH, and moisture content on the slow-release behaviour of N and P. The maximum release values of N and P from the composites were 69.46% N and 65.23% P. A 120-day soil burying experiment and 30-day Aspergillus niger (A. niger) inoculation were performed, and the biodegradability and change in microstructure were monitored. The addition of SAR to soil could also improve the water-retention ability of the soil.

Multifunctional cellulose-based hydrogels for biomedical applications

In recent decades, cellulose has been extensively investigated due to its favourable properties, such as hydrophilicity, low-cost, biodegradability, biocompatibility, and non-toxicity, which makes it a good feedstock for the synthesis of biocompatible hydrogels. The plentiful hydrophilic functional groups (such as hydroxyl, carboxyl, and aldehyde groups) in the backbone of cellulose and its derivatives can be used to prepare hydrogels easily with fascinating structures and properties, leading to burgeoning research interest in biomedical applications. This review focuses on state-of-the-art progress in cellulose-based hydrogels, which covers from their preparation methods (including chemical methods and physical methods) and physicochemical properties (such as stimuli-responsive properties, mechanical properties, and self-healing properties) to their biomedical applications, including drug delivery, tissue engineering, wound dressing, bioimaging, wearable sensors and so on. Moreover, the current challenges and future prospects for cellulose-based hydrogels in regard to their biomedical applications are also discussed at the end.

Hydrothermal Synthesis of Cellulose Nanocrystal-Grafted-Acrylic Acid Aerogels with Superabsorbent Properties

In this work, we applied a fast and simple method to synthesize cellulose nanocrystal (CNC) aerogels, via a hydrothermal strategy followed by freeze drying. The characteristics and morphology of the obtained CNC-g-AA aerogels were affected by the hydrothermal treatment time, volume of added AA (acrylic acid), and the mass fraction of the CNCs. The formation mechanism of the aerogels involved free radical graft copolymerization of AA and CNCs with the cross-linker N,N'-methylene bis(acrylamide) (MBA) during the hydrothermal process. The swelling ratio of the CNC-g-AA aerogels was as high as 495:1, which is considerably greater than that of other polysaccharide-g-AA aerogels systems. Moreover, the CNC-g-AA aerogels exhibited an excellent methyl blue (MB) adsorption capacity and the ability to undergo rapid desorption/regeneration. The maximum adsorption capacity of the CNC-g-AA aerogels for MB was greater than 400 mg/g. Excellent regeneration performance further indicates the promise of our CNC-g-AA aerogels as an adsorbent for applications in environmental remediation.

Carbon quantum dot-based fluorescent vesicles and chiral hydrogels with biosurfactant and biocompatible small molecule

In recent years, it is heartening to witness that carbon quantum dots (CQDs), a rising star in the family of carbon nanomaterials, have displayed tremendous applications in bioimaging, biosensing, drug delivery, optoelectronics, photovoltaics and photocatalysis. However, the investigations toward self-assembly of CQDs are still in their infancy. The participation of CQDs can bring additional functions to supramolecular self-assemblies, with photoluminescent property as the most exciting aspect. Here, we introduce CQDs into two types of classic colloidal systems containing low molecular weight surfactant and gelator to construct fluorescent vesicles and chiral hydrogels. The CQD-based vesicles were constructed through electrostatic interaction between the positively charged CQDs with peripherally substituted imidazolium cations and a negatively-charged biosurfactant, i.e., sodium deoxycholate (NaDC). The chiral hydrogels were prepared by increasing the concentration of NaDC and addition of a tripeptide (glutathione, GSH). It was found that both the hydrogels and corresponding xerogels are highly photoluminescent. A solid sensing system was prepared by coating a uniform layer of the hydrogel onto the silica gel plates by doctor blade technique followed by air-drying, which was then utilized to semiquantitatively detect Cu2+ in aqueous solutions.

One pot synthesis of carbon dots decorated carboxymethyl cellulose- hydroxyapatite nanocomposite for drug delivery, tissue engineering and Fe3+ ion sensing

In this work, carbon dots conjugated carboxymethyl cellulose-hydroxyapatite nanocomposite has been synthesized by one-pot synthesis method and used for multiple applications like metal ion sensing, osteogenic activity, bio-imaging and drug carrier. The structure and morphology of the nanocomposite were systematically characterized by FTIR, XRD, TGA, FESEM, TEM and DLS. Results clearly demonstrated the formation of fluorescent enabled carbon dots conjugated nanocomposite from carboxymethyl cellulose-hydroxyapatite nanocomposite by a simple thermal treatment. The synthesized nanocomposite is smaller than 100 nm and exhibits fluorescence emission band around 440 nm upon excitation with 340 nm wavelength. In the meantime, the nanocomposite was loaded with a chemotherapeutic drug, doxorubicin to evaluate the drug loading potential of synthesized nanocomposite. Moreover, the as-synthesized nanocomposite showed good osteogenic properties for bone tissue engineering and also exhibited excellent selectivity and sensitivity towards Fe³⁺ ions.