Characterization, genetic regulation and production of cyanobacterial exopolysaccharides and its applicability for heavy metal removal

Evaluating the role of soil EPS in modifying the toxicity potential of the mixture of polystyrene nanoplastics and xenoestrogen, Bisphenol A (BPA) in Allium cepa L

The coexistence of emerging pollutants like nanoplastics and xenoestrogen chemicals such as Bisphenol A (BPA) raises significant environmental concerns. While the individual impacts of BPA and polystyrene nanoplastics (PSNPs) on plants have been studied, their combined effects are not well understood. This study examines the interactions between eco-corona formation, physicochemical properties, and cyto-genotoxic effects of PSNPs and BPA on onion (Allium cepa) root tip cells. Eco-corona formation was induced by exposing BPA-PSNP mixtures to soil extracellular polymeric substances (EPS), and changes were analyzed using 3D-EEM, TEM, FTIR, hydrodynamic diameter, and contact angle measurements. Onion roots were treated with BPA (2.5, 5, and 10 mgL-1) combined with plain, aminated, and carboxylated PSNPs (100 mgL-1), with and without EPS interaction. Toxicity was assessed via cell viability, oxidative stress markers (superoxide radical, total ROS, hydroxyl radical), lipid peroxidation, SOD and catalase activity, mitotic index, and chromosomal abnormalities. BPA alone increased cytotoxic and genotoxic parameters in a dose-dependent manner. BPA with aminated PSNPs exhibited the highest toxicity among the pristine mixtures, revealing increased chromosomal abnormalities, oxidative stress, and cell mortality with rising BPA concentrations. In-silico experiments demonstrated the relationship between superoxide dismutase (SOD), catalase enzymes, PSNPs, BPA, and their mixtures. EPS adsorption notably reduced cyto-genotoxic effects, lipid peroxidation, and ROS levels, mitigating the toxicity of BPA-PSNP mixtures.

Bacterial extracellular biopolymers: Eco-diversification, biosynthesis, technological development and commercial applications

Synthetic polymers have been widely thriving as mega industries at a commercial scale in various commercial sectors over the last few decades. The extensive use of synthetic polymers has caused several negative repercussions on the health of humans and the environment. Recently, biopolymers have gained more attention among scientists of different disciplines by their potential therapeutic and commercial applications. Biopolymers are chain-like repeating units of molecules isolated from green sources. They are self-degradable, biocompatible, and non-toxic in nature. Recently, eco-friendly biopolymers such as extracellular polymeric substances (EPSs) have received much attention for their wide applications in the fields of emulsification, flocculation, preservatives, wastewater treatment, nanomaterial functionalization, drug delivery, cosmetics, glycomics, medicinal chemistry, and purification technology. The dynamicity of applications has raised the industrial and consumer demands to cater to the needs of mankind. This review deals with current insights and highlights on database surveys, potential sources, classification, extremophilic EPSs, bioprospecting, patents, microenvironment stability, biosynthesis, and genetic advances for production of high valued ecofriendly polymers. The importance of high valued EPSs in commercial and industrial applications in the global market economy is also summarized. This review concludes with future perspectives and commercial applications for the well-being of humanity.

Cyanobacterial and microalgae polymers: antiviral activity and applications

At the end of 2019, the world witnessed the beginning of the COVID-19 pandemic. As an aggressive viral infection, the entire world remained attentive to new discoveries about the SARS-CoV-2 virus and its effects in the human body. The search for new antivirals capable of preventing and/or controlling the infection became one of the main goals of research during this time. New biocompounds from marine sources, especially microalgae and cyanobacteria, with pharmacological benefits, such as anticoagulant, anti-inflammatory and antiviral attracted particular interest. Polysaccharides (PS) and extracellular polymeric substances (EPS), especially those containing sulfated groups in their structure, have potential antiviral activity against several types of viruses including HIV-1, herpes simplex virus type 1, and SARS-CoV-2. We review the main characteristics of PS and EPS with antiviral activity, the mechanisms of action, and the different extraction methodologies from microalgae and cyanobacteria biomass.

Unveiling the biointerfaces characteristics and removal pathways of Cr(Ⅵ) in Bacillus cereus FNXJ1-2-3 for the Cr(Ⅵ)-to-Cr(0) conversion

Although less toxic than hexavalent chromium, Cr (Ⅲ) species still pose a threat to human health. The Cr (Ⅵ) should be converted to Cr (0) instead of Cr (Ⅲ), which is still involved in biological detoxification filed. Herein, for the first time, it was found that Cr(Ⅵ) can be reduced into Cr(0) by Bacillus cereus FNXJ1-2-3, a way to completely harmless treatment of Cr(Ⅵ). The bacterial strain exhibited excellent performance in the reduction, sorption, and accumulation of Cr(Ⅵ) and Cr (Ⅲ). XPS etching characterization inferred that the transformation of Cr(Ⅵ) into Cr(0) followed a reduction pathway of Cr(Ⅵ)→Cr (Ⅲ)→metallic Cr(0), in which at least two secretory chromium reductases (ECrⅥ→Ⅲ and ECrⅢ→0) worked. Under the optimum condition, the yield ratio of Cr(0)/Cr (Ⅲ) reached 33.90%. In addition, the interfacial interactions, ion channels, chromium reductases, and external electron donors also contributed to the Cr(Ⅵ)/Cr(0) transformation. Findings of this study indicate that Bacillus cereus FNXJ1-2-3 is a promising bioremediation agent for Cr(Ⅵ) pollution control.

Synergistic promotion of microalgal growth and copper removal from synthetic wastewater by nanoscale zero-valent iron particles

The increasing concentrations of heavy metals in livestock wastewater pose a serious threat to the environmental safety and human health, limiting its resource utilisation. In the present study, microalgae and nanoscale zero-valent iron were selected to construct a coupled system for copper-containing wastewater treatment. The addition of 50 mg·L-1 nanoscale zero-valent iron (50 nm) was the optimal value for the experiment, which could significantly increase the biomass of microalgae. In addition, nanoscale zero-valent iron stimulated microalgal secretion of extracellular polymeric substances, increasing the contents of binding sites, organic ligands, and functional groups on the microalgal surfaces and ultimately promoting the settling of microalgae and binding of heavy metals. The coupled system could quickly adapt to copper-containing wastewater of 10 mg·L-1, and the copper removal rate reached 94.99%. Adsorption and uptake by organisms, together with the contribution of zero-valent iron nanoparticles, are the major copper removal pathways. Overall, this work offers a novel technical solution for enhanced treatment of copper-containing livestock wastewater, which will help improve the efficiency and quality of wastewater treatment.

Copper removal efficacy and stress tolerance potential of Leptolyngbya sp. GUEco1015

Cyanobacteria, a group of microalgae are the potent organism having the ability to survive in the copper rich environment and recently gained too much attention for their profuse proliferation in such water bodies. Amongst the members of cyanobacteria, the current study was conducted on Leptolyngbya sp. GUEco1015, collected from hydrocarbon rich water bodies of Assam, India. Morphological images of treated samples showed a remarkable damage in the cell surface as well as the organelles over the control. Biochemical results revealed a significant increase of enzymatic and non-enzymatic antioxidants during oxidative damage of Cu2+. But, ascorbate in 1.2 ppm (p < 0.01), 1.5 ppm (p < 0.001) and catalase content 1.5 ppm (p < 0.05) showed a significant reduction after a certain level. The cells were optimized to evaluate the maximum Cu2+ removal potential by the cells related to growth. Initial metal concentration 0.1 ppm, pH 7.5, temperature 25 °C and shaking rate 100 rpm are the optimized abiotic parameters which showed maximum 83% of Cu2+ removal. FTIR spectroscopy and EDX data has identified a number of notable functional groups that were involved in Cu2+ binding mechanism and revealed a distinctive peak of Cu with 0.41 wt % which makes the species as one of the competent copper adsorbents.

Exploration of Exopolysaccharide from Leuconostoc mesenteroides HDE-8: Unveiling Structure, Bioactivity, and Food Industry Applications

A strain of Leuconostoc mesenteroides HDE-8 was isolated from homemade longan fermentation broth. The exopolysaccharide (EPS) yield of the strain was 25.1 g/L. The EPS was isolated and purified, and the structure was characterized using various techniques, including X-ray diffraction (XRD), nuclear magnetic resonance (NMR) spectroscopy, Fourier-transform infrared (FT-IR) spectroscopy, high-performance size exclusion chromatography (HPSEC), and scanning electron microscopy (SEM). The monosaccharide composition of the EPS was glucose, with a molecular weight (Mw) of 1.7 × 106 Da. NMR spectroscopy revealed that the composition of the HDE-8 EPS consisted of D-glucose pyranose linked by α-(1→4) and α-(1→6) bonds. The SEM analysis of the EPS showed an irregular sheet-like structure. Physicochemical analysis demonstrated that EPSs exhibit excellent thermal stability and high viscosity, making them suitable for fermentation in heat-processed and acidic foods. Additionally, milk coagulation tests showed that the presence of EPSs promotes milk coagulation when supplemented with sucrose. It suggests that EPSs have wide-ranging potential applications as food additives, improving the texture and taste of dairy products. This study provides practical guidance for the commercial use of HDE-8 EPSs in the food and related industries.

Engineering strategies and applications of cyanobacterial exopolysaccharides: A review on past achievements and recent perspectives

Cyanobacteria are ideally suited for developing sustainable biological products but are underdeveloped due to a lack of genetic tools. Exopolysaccharide (EPS) is one of the essential bioproducts with widespread industrial applications. Despite their unique structural characteristics associated with distinct biological and physicochemical aspects, EPS from cyanobacteria has been underexplored. However, it is expected to accelerate in the near future due to the utilization of low-cost cyanobacterial platforms and readily available information on the structural data and specific features of these biopolymers. In recent years, cyanobacterial EPSs have attracted growing scientific attention due to their simple renewability, rheological characteristics, massive production, and potential uses in several biotechnology domains. This review focuses on the most recent research on potential new EPS producers and their distinct compositions responsible for novel biological activities. Additionally, nutritional and process parameters discovered recently for enhancing EPS production and engineering strategies applied currently to control the biosynthetic pathway for enhanced EPS production are critically highlighted. The process intensification of previously developed EPS extraction and purification processes from cyanobacterial biomass is also extensively explained. Furthermore, the newly reported biotechnological applications of cyanobacterial exopolysaccharides are also discussed.

The extracellular polysaccharide determine the physico-chemical surface properties of Microcystis

Microcystis possesses the capacity to form colonies and blooms in lakes and reservoirs worldwide, causing significant ecological challenges in aquatic ecosystems. However, little is known about the determining factors of physico-chemical surface properties that govern the competitive advantage of Microcystis. Here, The physico-chemical surface properties of Microcystis wesenbergii and Microcystis aeruginosa, including specific surface area (SSA), hydrophobicity, zeta potential, and functional groups were investigated. Additionally, the extracellular polysaccharide (EPS) were analyzed. Laboratory-cultured Microcystis exhibited hydrophilic, a negative zeta potential and negatively charged. Furthermore, no significant relationship was shown between these properties and the cultivation stage. Microcystis wesenbergii exhibited low free energy of cohesion, high surface free energy, high growth rate, and high EPS content during the logarithmic phase. On the other hand, M. aeruginosa displayed lower free energy of cohesion, high surface free energy, high EPS content, and high growth rate during the stationary phase. These characteristics contribute to their respective competitive advantage. Furthermore, the relationship between EPS and surface properties was investigated. The polysaccharide component of EPS primarily influenced the SSA and total surface energy of Microcystis. Likewise, the protein component of EPS influenced hydrophobicity and surface tension. The polysaccharide composition, including glucuronic acid, xylose, and fructose, mainly influenced surface properties. Additionally, hydrophilic groups such as O-H and P-O-P played a crucial role in determining hydrophobicity in Microcystis. This study elucidates that EPS influenced the SSA, hydrophobicity, and surface free energy of Microcystis cells, which in turn impact the formation of Microcystis blooms and the collection.

Simultaneous removal of phosphorus, zinc, and lead from oligotrophic ecosystem by iron-driven denitrification: Performance and mechanisms

Based on the current situation of complex pollution caused in surface water by oligotrophic condition and heavy metal release from river and lake bottom sediments. This study aimed to achieve the simultaneous removal of nitrate, phosphorus, Zn2+ and Pb2+ through microbial approach. At nitrate concentration of 4.82 mg L-1, carbon to nitrogen ratio of 1.5, pH of 6.0, and Fe2+ concentration of 5.0 mg L-1, the nitrate removal efficiency of Zoogloea sp. FY-6 reached 95.17%. The addition of pollutants under these conditions resulted in 88.76% removal of total phosphorus at 18 h, and 85.46 and 78.59% removal of Zn2+ and Pb2+ respectively, and there was competition for adsorption between Zn2+ and Pb2+. Extracellular polymers and fluorescence excitation-emission substrates confirmed that Fe2+ reduced heavy metal toxicity through promoting bacterial production of secretions and promotes denitrification as a carbon source. Meanwhile, contaminant removal curves and Fourier transform infrared spectroscopy, X-ray diffraction, and X-ray photoelectron spectroscopy demonstrated the synchronous removal of Zn2+ and Pb2+ mainly through biological action and the formation of nanoscale iron oxides. Biological-iron precipitation also provided adsorption sites for phosphorus. This research provides the theoretical foundation for applying microorganisms to restore oligotrophic source water (rivers and lakes) containing complex pollutants.

Advanced oxidation process for the treatment of industrial wastewater: A review on strategies, mechanisms, bottlenecks and prospects

Due to its complex and, often, highly contaminated nature, treating industrial wastewater poses a significant environmental problem. Many of the persistent pollutants found in industrial effluents cannot be effectively removed by conventional treatment procedures. Advanced Oxidation Processes (AOPs) have emerged as a promising solution, offering versatile and effective means of pollutant removal and mineralization. This comprehensive review explores the application of various AOP strategies in industrial wastewater treatment, focusing on their mechanisms and effectiveness. Ozonation (O3): Ozonation, leveraging ozone (O3), represents a well-established AOP for industrial waste water treatment. Ozone's formidable oxidative potential enables the breakdown of a broad spectrum of organic and inorganic contaminants. This paper provides an in-depth examination of ozone reactions, practical applications, and considerations involved in implementing ozonation. UV/Hydrogen Peroxide (UV/H2O2): The combination of ultraviolet (UV) light and hydrogen peroxide (H2O2) has gained prominence as an AOP due to its ability to generate hydroxyl radicals (ȮH), highly efficient in pollutant degradation. The review explores factors influencing the efficiency of UV/H2O2 processes, including H2O2 dosage and UV radiation intensity. Fenton and Photo-Fenton Processes: Fenton's reagent and Photo-Fenton processes employ iron ions and hydrogen peroxide to generate hydroxyl radicals for pollutant oxidation. The paper delves into the mechanisms, catalyst selection, and the role of photoactivation in enhancing degradation rates within the context of industrial wastewater treatment. Electrochemical Advanced Oxidation Processes (EAOPs): EAOPs encompass a range of techniques, such as electro-Fenton and anodic oxidation, which employ electrode reactions to produce ȮH radicals. This review explores the electrochemical principles, electrode materials, and operational parameters critical for optimizing EAOPs in industrial wastewater treatment. TiO2 Photocatalysis (UV/TiO2): Titanium dioxide (TiO2) photocatalysis, driven by UV light, is examined for its potential in industrial wastewater treatment. The review investigates TiO2 catalyst properties, reaction mechanisms, and the influence of parameters like catalyst loading and UV intensity on pollutant removal. Sonolysis (Ultrasonic Irradiation): High-frequency ultrasound-induced sonolysis represents a unique AOP, generating ȮH radicals during the formation and collapse of cavitation bubbles. This paper delves into the physics of cavitation, sonolytic reactions, and optimization strategies for industrial wastewater treatment. This review offers a critical assessment of the applicability, advantages, and limitations of these AOP strategies in addressing the diverse challenges posed by industrial wastewater. It emphasizes the importance of selecting AOPs tailored to the specific characteristics of industrial effluents and outlines potential directions for future research and practical implementation. The integrated use of these AOPs, when appropriately adapted, holds the potential to achieve sustainable and efficient treatment of industrial wastewater, contributing significantly to environmental preservation and regulatory compliance.

Bio-Based Polymeric Membranes: Development and Environmental Applications

Nowadays, membrane technology is an efficient process for separating compounds with minimal structural abrasion; however, the manufacture of membranes still has several drawbacks to being profitable and competitive commercially under an environmentally friendly approach. In this sense, this review focuses on bio-based polymeric membranes as an alternative to solve the environmental concern caused by the use of polymeric materials of fossil origin. The fabrication of bio-based polymeric membranes is explained through a general description of elements such as the selection of bio-based polymers, the preparation methods, the usefulness of additives, the search for green solvents, and the characterization of the membranes. The advantages and disadvantages of bio-based polymeric membranes are discussed, and the application of bio-based membranes to recover organic and inorganic contaminants is also discussed.

Assessing the Antitumor Potential of Variants of the Extracellular Carbohydrate Polymer from Synechocystis ΔsigF Mutant

Cancer is a leading cause of death worldwide with a huge societal and economic impact. Clinically effective and less expensive anticancer agents derived from natural sources can help to overcome limitations and negative side effects of chemotherapy and radiotherapy. Previously, we showed that the extracellular carbohydrate polymer of a Synechocystis ΔsigF overproducing mutant displayed a strong antitumor activity towards several human tumor cell lines, by inducing high levels of apoptosis through p53 and caspase-3 activation. Here, the ΔsigF polymer was manipulated to obtain variants that were tested in a human melanoma (Mewo) cell line. Our results demonstrated that high molecular mass fractions were important for the polymer bioactivity, and that the reduction of the peptide content generated a variant with enhanced in vitro antitumor activity. This variant, and the original ΔsigF polymer, were further tested in vivo using the chick chorioallantoic membrane (CAM) assay. Both polymers significantly decreased xenografted CAM tumor growth and affected tumor morphology, by promoting less compact tumors, validating their antitumor potential in vivo. This work contributes with strategies for the design and testing tailored cyanobacterial extracellular polymers and further strengths the relevance of evaluating this type of polymers for biotechnological/biomedical applications.

Shedding Light on the Hidden Benefit of Porphyridium cruentum Culture

Microalgae can represent a reliable source of natural compounds with different activities. Here, we evaluated the antioxidant and anti-inflammatory activity of sulfated exopolysaccharides (s-EPSs) and phycoerythrin (PE), two molecules naturally produced by the red marine microalga Porphyridium cruentum (CCALA415). In vitro and cell-based assays were performed to assess the biological activities of these compounds. The s-EPSs, owing to the presence of sulfate groups, showed biocompatibility on immortalized eukaryotic cell lines and a high antioxidant activity on cell-based systems. PE showed powerful antioxidant activity both in vitro and on cell-based systems, but purification is mandatory for its safe use. Finally, both molecules showed anti-inflammatory activity comparable to that of ibuprofen and helped tissue regeneration. Thus, the isolated molecules from microalgae represent an excellent source of antioxidants to be used in different fields.

Efficient Lead Pb(II) Removal with Chemically Modified Nostoc commune Biomass

A new biosorbent based on Nostoc commune (NC) cyanobacteria, chemically modified with NaOH (NCM), has been prepared, characterized and tested as an effective biomass to remove Pb(II) in aqueous media. The adsorption capacity of NCM was determined to be qe = 384.6 mg g−1. It is higher than several other biosorbents reported in the literature. Structural and morphological characterization were performed by FTIR, SEM/EDX and point zero of charge pH (pHPZC) measurements. NCM biosorbent showed more porous surfaces than those NC with heterogeneous plates including functional adsorption groups such as OH, C = O, COO−, COH or NH. Optimal Pb(II) adsorption occurred at pH 4.5 and 5.5 with a biomass dose of 0.5 g L−1. The experimental data of the adsorption process were well fitted with the Freundlich-isotherm model and pseudo-2nd order kinetics, which indicated that Pb(II) adsorption was a chemisorption process on heterogeneous surfaces of NCM. According to the thermodynamic parameters, this process was exothermic (∆H0 < 0), feasible and spontaneous (∆G0 < 0). NCM can be regenerated and efficiently reused up to 4 times (%D > 92%). NCM was also tested to remove Pb (%R~98%) and Ca (%R~64%) from real wastewater.

Biosorption Characteristic and Cytoprotective Effect of Pb2+, Cu2+ and Cd2+ by a Novel Polysaccharide from Zingiber strioatum

The pollution of heavy metal ions can cause damage to the human body through food, so developing a new biocompatible material that can remove the damage of heavy metal ions has a good application prospect. In this study, we obtained a new homogeneous polysaccharide composed of seven monosaccharides from Zingiber strioatum by using the method of separation and purification of polysaccharide. The results of adsorption behavior showed that the concentration, temperature and pH value could affect the adsorption effect of Zingiber strioatum polysaccharide (ZSP). Through model fitting of the data of adsorption time and metal concentration, the pseudo second-order kinetic model can well describe the kinetics of the adsorption process, and the adsorption isotherm data fit well with the Langmuir model. In the preliminary research results of adsorption mechanism, SEM showed the appearance of ZSP as flake and porous surface; EDX analysis confirmed the metal adsorption capacity of ZSP. Meanwhile, XPS and FT-IR further clarified the adsorption based on functional groups composed of C and O. The cells preprotected by ZSP can resist heavy metal ions. The above results show that ZSP can be used as a new macromolecule to bind heavy metal ions, which can broaden the research scope of polysaccharides in contaminated food systems.

Metal removal capability of two cyanobacterial species in autotrophic and mixotrophic mode of nutrition

Background

Cyanobacteria are ecologically significant prokaryotes that can be found in heavy metals contaminated environments. As their photosynthetic machinery imposes high demands for metals, homeostasis of these micronutrients has been extensively considered in cyanobacteria. Recently, most studies have been focused on different habitats using microalgae leads to a remarkable reduction of an array of organic and inorganic nutrients, but what takes place in the extracellular environment when cells are exposed to external supplementation with heavy metals remains largely unknown.

Methods

Here, extracellular polymeric substances (EPS) production in strains Nostoc sp. N27P72 and Nostoc sp. FB71 was isolated from different habitats and thenthe results were compared and reported.

Result

Cultures of both strains, supplemented separately with either glucose, sucrose, lactose, or maltose showed that production of EPS and cell dry weight were boosted by maltose supplementation. The production of EPS (9.1 ± 0.05 μg/ml) and increase in cell dry weight (1.01 ± 0.06 g/l) were comparatively high in Nostoc sp. N27P72 which was isolated from lime stones.The cultures were evaluated for their ability to remove Cu (II), Cr (III), and Ni (II) in culture media with and without maltose. The crude EPS showed metal adsorption capacity assuming the order Ni (II) > Cu (II) > Cr (III) from the metal-binding experiments.Nickel was preferentially biosorbed with a maximal uptake of 188.8 ± 0.14 mg (g cell dry wt) ⁻¹ crude EPS. We found that using maltose as a carbon source can increase the production of EPS, protein, and carbohydrates content and it could be a significant reason for the high ability of metal absorbance. FT-IR spectroscopy revealed that the treatment with Ni can change the functional groups and glycoside linkages in both strains. Results of Gas Chromatography-Mass Spectrometry (GC–MS) were used to determine the biochemical composition of Nostoc sp. N27P72, showed that strong Ni (II) removal capability could be associated with the high silicon containing heterocyclic compound and aromatic diacid compounds content.

Conclusion

The results of this studyindicatede that strains Nostoc sp. N27P72 can be a good candidate for the commercial production of EPS and might be utilized in bioremediation field as an alternative to synthetic and abiotic flocculants.

Supplementary Information

The online version contains supplementary material available at 10.1186/s12866-022-02471-8.

Mixotrophic conditions can be used to optimize the biosorption controllable factors for the maximum metal removal efficiency.

Different habitats (lime stones of Khuzestan province and fresh water of of Golestan province) can effect the uptake of heavy metal by two Nostoc species (Nostoc sp. N27P72 and Nostoc sp. FB71).

Modification of culture media can maximize the uptake capacity of the heavy metal ions by two Nostoc species.

Applications of Synthetic Biotechnology on Carbon Neutrality Research: A Review on Electrically Driven Microbial and Enzyme Engineering

With the advancement of science, technology, and productivity, the rapid development of industrial production, transportation, and the exploitation of fossil fuels has gradually led to the accumulation of greenhouse gases and deterioration of global warming. Carbon neutrality is a balance between absorption and emissions achieved by minimizing carbon dioxide (CO2) emissions from human social productive activity through a series of initiatives, including energy substitution and energy efficiency improvement. Then CO2 was offset through forest carbon sequestration and captured at last. Therefore, efficiently reducing CO2 emissions and enhancing CO2 capture are a matter of great urgency. Because many species have the natural CO2 capture properties, more and more scientists focus their attention on developing the biological carbon sequestration technique and further combine with synthetic biotechnology and electricity. In this article, the advances of the synthetic biotechnology method for the most promising organisms were reviewed, such as cyanobacteria, Escherichia coli, and yeast, in which the metabolic pathways were reconstructed to enhance the efficiency of CO2 capture and product synthesis. Furthermore, the electrically driven microbial and enzyme engineering processes are also summarized, in which the critical role and principle of electricity in the process of CO2 capture are canvassed. This review provides detailed summary and analysis of CO2 capture through synthetic biotechnology, which also pave the way for implementing electrically driven combined strategies.

Structural characterization of exopolysaccharides from Weissella cibaria NC516.11 in distiller grains and its improvement in gluten-free dough

In this study, an exopolysaccharide (EPS) was produced by Weissella cibaria NC516.11 isolated from distiller grains of Chinese Baijiu. The structural characterization of EPS determined using fourier transform infrared spectra and nuclear magnetic resonance spectra demonstrated that W. cibaria NC516.11 had α-(1 → 6) (93.46%) d-glucose linkages with a few α-(1 → 3) (6.54%) d-glucose linked branches. The monosaccharide composition of the EPS was glucose, and its molecular weight was 2.82 × 10⁶ Da. Scanning electron microscopy showed that the microstructure of EPS had a three-dimensional structure at low magnification and a particle structure that protruded from the surface at high magnification. The addition of EPS into dough can promote the cross-linking of starch molecules and increase the water-holding capacity. Dynamic rheology indicated that the aqueous solution of EPS is a pseudoplastic fluid, and the higher the concentration of EPS, the greater the viscosity. The addition of EPS to the gluten-free dough showed G' > G", which could increase the viscoelastic properties of the dough and enhance the gluten network.

Biosorption of Pb2+ and Zn2+ by Ca-alginate immobilized and free extracellular polysaccharides produced by Leuconostoc citreum B-2

AIMS

Heavy metal pollution seriously threatens human health and ecological environment. Due to high efficiency and excellent development prospect, adsorption technology has attracted worldwide attention. It is significant to develop renewable adsorbents with excellent adsorption performance.

SCOPE

In this study, the Pb²⁺ and Zn²⁺ adsorption capacity of Ca-alginate immobilized and free (without immobilization) Leu. citreum B-2 extracellular polysaccharides (EPS) was investigated. Isotherm and kinetic models were used to evaluate the adsorption performance. The adsorbents were characterized by SEM, FT-IR and XPS spectroscopy.

CONCLUSIONS

The maximum biosorption of Pb²⁺ 269.54 and Zn²⁺ 49.88 mg/g was achieved with immobilized EPS. Thermodynamic studies showed that the adsorption of Pb²⁺ and Zn²⁺ on EPS was a spontaneous and feasible process, and the adsorption properties of EPS were exothermic for lead and endothermic for zinc. All the adsorption processes conformed to the pseudo-second-order model and Langmuir adsorption isotherm model, indicating that the adsorption was mainly chemisorption taken placed on single adsorption surface. SEM results showed that the surface of EPS become denser after adsorption. FTIR and XPS analysis indicated that the adsorption mechanism mainly involved the complexation reaction and ion exchange of functional groups such as CO, O-C-O, -COOH and C-OH.

Microbial Exopolysaccharides in Traditional Mexican Fermented Beverages

Exopolysaccharides (EPS) are biopolymers produced by many microorganisms, including some species of the genus Acetobacter, Bacillus, Fructobacillus, Leuconostoc, Lactobacillus, Lactiplantibacillus, Pediococcus, Pichia, Rhodotorula, Saccharomycodes, Schizosaccharomyces, and Sphingomonas, which have been reported in the microbiota of traditional fermented beverages. Dextran, levan, glucan, gellan, and cellulose, among others, are EPS produced by these genera. Extracellular biopolymers are responsible for contributing to specific characteristics to fermented products, such as modifying their organoleptic properties or contributing to biological activities. However, EPS can be easily found in the dairy industry, where they affect rheological properties in products such as yogurt or cheese, among others. Over the years, LAB has been recognized as good starter strains in spontaneous fermentation, as they can contribute beneficial properties to the final product in conjunction with yeasts. To the best our knowledge, several articles have reported that the EPS produced by LAB and yeasts possess many both biological and technological properties that can be influenced by many factors in which fermentation occurs. Therefore, this review presents traditional Mexican fermented beverages (tavern, tuba, sotol, and aguamiel) and relates them to the microbial EPS, which affect biological and techno-functional activities.

Bioprocess development for biosorption of cobalt ions and Congo red from aquatic mixture using Enteromorpha intestinalis biomass as sustainable biosorbent

Because of the increased amount of cobalt and Congo red dye effluents attributable to the industrial operations, the capacity of Enteromorpha intestinalis biomass as a sustainable source to achieve significant biosorption percent for both pollutants from dual solution was assessed. A fifty batch FCCCD experiments for biosorption of cobalt ions and Congo red dye were performed. The complete removal of Congo red dye was obtained at 36th run using an initial pH value of 10, 1.0 g/L of Enteromorpha intestinalis biomass, 100 and 200 mg/L of Congo red and cobalt for a 20-min incubation time. Meanwhile, a cobalt removal percent of 85.22 was obtained at 35th run using a neutral pH of 7.0, 3.0 g/L of algal biomass, 150 and 120 mg/L of Congo red, and cobalt for a 60-min incubation time. For further illustration and to interpret how the biosorption mechanism was performed, FTIR analysis was conducted to inspect the role of each active group in the biosorption process, it can be inferred that -OH, C-H, C=O, O-SO3- and C-O-C groups were mainly responsible for Co2+ adsorption of from aqueous dual solution. Also, scan electron microscope revealed the appearance of new shiny particles biosorbed on E. intestinalis surface after the biosorption process. EDS analysis proved the presence of Co2+ on the algal surface after the biosorption process.

A novel method for solidification/stabilization of Cd(II), Hg(II), Cu(II), and Zn(II) by activated electrolytic manganese slag

This study was aimed at removing and stabilizing heavy metals (Hg^II, Zn^II, Cu^II, and Cd^II). A novel material (named A-EMS) for heavy metal removal was proposed by ball grinding activated electrolytic manganese slag (EMS) with low content of sodium hydroxide. For different application scenarios, the two physical properties of the materials were developed: the powdery A-EMS (powder) was used to remove heavy metals from wastewater. In addition, the blocky A-EMS (porous brick) was used to build barrier walls for tailings ponds to prevent heavy metals from flowing out. The maximum removal amount of Hg(II) Cd(II), Zn(II), and Cu(II) by A-EMS were 475.35, 77.72, 259.70, and 203.20 mg/g in 30 min. The heavy metals ions were removed and fixed on A-EMS mainly through ion exchange and some forms of electrostatic adsorption and hydroxyl complexation. After consolidating the heavy metals, the compressive strength of the materials can reach 20 Mpa and the leaching toxicity met the national standard of China (GB/T 3838-2002) in 60 days. These excellent properties made A-EMS widely used to remove heavy metals in wastewater and to intercept and solidify heavy metals in mine wastewater.

Deciphering and engineering photosynthetic cyanobacteria for heavy metal bioremediation

Environmental pollution caused by heavy metals has received worldwide attentions due to their ubiquity, poor degradability and easy bioaccumulation in host cells. As one potential solution, photosynthetic cyanobacteria have been considered as promising remediation chassis and widely applied in various bioremediation processes of heavy-metals. Meanwhile, deciphering resistant mechanisms and constructing tolerant chassis towards heavy metals could greatly contribute to the successful application of the cyanobacteria-based bioremediation in the future. In this review, first we summarized recent application of cyanobacteria in heavy metals bioremediation using either live or dead cells. Second, resistant mechanisms and strategies for enhancing cyanobacterial bioremediation of heavy metals were discussed. Finally, potential challenges and perspectives for improving bioremediation of heavy metals by cyanobacteria were presented.

Effects of humic acid on sludge performance, antibiotics resistance genes propagation and functional genes expression during Cu(II)-containing wastewater treatment via metagenomics analysis

The humic acid (HA) function on the sludge performance, antibiotics resistance genes (ARGs) propagation and functional genes expression during Cu(II)-containing wastewater treatment was comprehensively investigated via metagenomics analysis. Results showed that the pollutants removal was significantly inhibited after long-term exposure of 5 mg/L Cu(II), while the inhibitory effects were moderately alleviated after addition of 10 mg/L HA. The extracellular polymeric substances (EPS) production with Cu(II) acclimation was higher than the sludge with Cu(II) and HA acclimation. The microbial community was significantly affected by the HA addition, while the relative abundance of dominant ARGs had no distinct differences with or without HA addition under Cu(II) stress. The functional genes were largely implemented for microbial metabolism, while no significant differences were found with HA addition under Cu(II) stress. Thus, the HA function for ARGs propagation and functional genes expression needed to be further research under Cu(II) stress in wastewater treatment.

Cyanobacterial Extracellular Polymeric Substances for Heavy Metal Removal: A Mini Review

Heavy metals from various natural and anthropogenic sources are becoming a chief threat to the aquatic system owing to their toxic and lethal effect. The treatment of such contaminated wastewater is one of the prime concerns in this field. For decades, a huge array of innovative biosorbents is used for heavy metal removal. Though extensive microbes and their biomolecules have been experimented and have showed great potential but most of them have failed to have the substantial breakthrough for the practical application. The present review emphasis on the potential utilization of the cyanobacteria for the heavy metal removal along with the toxic effect imposed by the pollutant. Furthermore, the effect of significant parameters, plausible mechanistic insights of the heavy metal toxicity imposed onto the cyanobacteria is also discussed in detail. The role of extrapolymeric substances and metallothionein secreted by the microbes are also elaborated. The review was evident that the cyanobacterial species have a huge potential towards the heavy metal removal from the aqueous system ranging from very low to very high concentrations.

Engineering biology approaches for food and nutrient production by cyanobacteria

As photoautotrophic organisms, cyanobacteria capture and store solar energy in the form of biomass. Cyanobacterial biomass has been an important component of diet and nutrition in several regions for centuries. Synthetic biology strategies are currently being applied to increase the yield and productivity of cyanobacterial biomass by optimizing solar energy utilization and CO₂ fixation rates for carbon storage. Likewise, engineering cyanobacteria as cellular factories to synthesize carbohydrates, amino acids, proteins, lipids and fatty acids is providing an attractive way to sustainably produce food and nutrients for human consumption. In this review, we have summarized recent progress in both aspects and prospective trends under development.

Biochemical characterization of Nostoc sp. exopolysaccharides and evaluation of potential use in wound healing

Exopolysaccharides (EPS) produced by cyanobacteria are complex biomolecules of anionic nature with potential biomedical applications. In this study, the EPS produced by the Nostoc sp. strains PCC7936 and PCC7413 were characterized and evaluated as a biomaterial for new wound dressings. The addition of acetate ions to the culture medium slightly stimulated EPS production, achieving 1463.1 ± 16.0 mgL^-1 (PCC7413) and 1372.1 ± 29.0 mgL^-1 (PCC7936). Both EPS presented nine monosaccharide residues and a MW > 1000 kDa. The acetate addition changed the monosaccharide molar percentages. FTIR and DLS results confirmed the anionic nature and the presence of sulfate groups in both EPS, which are determinant features for biomedical applications. Both EPS at 1%(w/v) formed gels in the presence of 0.4%(w/v) FeCl₃. Results obtained for MTT assay and wound healing in vitro scratch assay revealed hydrogels biocompatibility and ability to promote fibroblast migration and proliferation that was greater in PCC7936. The Nostoc EPS hydrogels presented promising properties to be applied in the treatment of skin injuries.

Detailed algal extracellular carbohydrate-protein characterisation lends insight into algal solid-liquid separation process outcomes

The effectiveness of algal solid-liquid separation processes has been impacted by the strong influence of algal extracellular organic matter (EOM), where the composition of proteins and carbohydrates and their associated interactions have been implicated. However, despite this, no studies have analysed the detailed protein and carbohydrate composition in EOM in relation to their impacts on separation. Hence, the aim of this study was to explore the relationship between the variety of carbohydrates and proteins present in the EOM of select algal and cyanobacterial samples and the associated separation performance to better understand the influence of specific biopolymers. The protein and carbohydrate composition of the EOM of three species - Microcystis aeruginosa CS-555/1, Chlorella vulgaris CS-42/7 and Microcystis aeruginosa CS-564/01, previously observed to result in variable treatment performance were investigated. The carbohydrates were analysed via high-performance anion-exchange chromatography (HPAEC) with pulsed amperometric detection (PAD) while the proteins were analysed using sodium dodecyl sulphate-polyacrylamide gel electrophoresis (SDS-PAGE) combined with liquid chromatography-mass spectrometry (LC-MS). Ten unique monosaccharides were identified; of these, the greatest proportion of charged uronic acid carbohydrates were present in the EOM of M. aeruginosa CS-564/01. The protein profiling revealed that M. aeruginosa CS-564/01 had a greater proportion and concentration of proteins >75 kDa when compared to M. aeruginosa CS-555/1 or C. vulgaris CS-42/7. It was determined that three serine- and two threonine-based proteins, detected in greater concentrations in M. aeruginosa CS-564/01 than CS-555/1, could covalently interact with carbohydrates (OHenderson et al., 2010a, 2010b-linked glycosylation). These proteins have the ability to form numerous localised networks with carbohydrates and cells in the presence of coagulant molecules, thereby providing a good hypothesis to explain the excellent treatment performance observed for M. aeruginosa CS-564/01 previously. It is proposed that the uronic acids in M. aeruginosa CS-564/01 could interact with proteins via glycosylation, explaining why the coagulant demand for this strain remained low despite the high charged carbohydrate concentration. Overall, it is proposed that process performance could be impacted by: (a) physicochemical characteristics and (b) carbohydrate-protein interactions.

Exopolysaccharides from Cyanobacteria: Strategies for Bioprocess Development

Cyanobacteria have the potential to become an industrially sustainable source of functional biopolymers. Their exopolysaccharides (EPS) harbor chemical complexity, which predicts bioactive potential. Although some are reported to excrete conspicuous amounts of polysaccharides, others are still to be discovered. The production of this strain-specific trait can promote carbon neutrality while its intrinsic location can potentially reduce downstream processing costs. To develop an EPS cyanobacterial bioprocess (Cyano-EPS) three steps were explored: the selection of the cyanobacterial host; optimization of production parameters; downstream processing. Studying the production parameters allow us to understand and optimize their response in terms of growth and EPS production though many times it was found divergent. Although the extraction of EPS can be achieved with a certain degree of simplicity, the purification and isolation steps demand experience. In this review, we gathered relevant research on EPS with a focus on bioprocess development. Challenges and strategies to overcome possible drawbacks are highlighted.

Statistical optimization of process parameters for improvement of phycobiliproteins (PBPs) yield using ultrasound-assisted extraction and its kinetic study

The present study is mainly concerned for the development of an optimal ultrasound-assisted extraction (UAE) condition for phycobiliproteins (PBPs) from Oscillatoria sp. (BTA 170) using Taguchi methodology. Four process parameters viz. solid to liquid ratio, duty cycle, electrical acoustic intensity, and pH, for UAE were optimized using Taguchi methodology for enhanced PBPs extraction. The ratio of signal to noise (S/N) was used to compute the optimized condition required to attain a higher yield of PBPs, the average performance of individual parameter and corresponding interactive effects. The statistically significant parameters with their contribution were assessed using Analysis of variance (ANOVA). Results showed that duty cycle contributed the maximum influence (30.81%) on phycocyanin (PC) extraction followed by a solid liquid ratio (28.62%), pH (22.46%) and electrical acoustic intensity (18.10%). The highest contribution on the extraction of phycoerythrin (PE) was found from pH (33.16%), followed by duty cycle (31.57%), solid to liquid ratio (22.83%) and electrical acoustic intensity (12.45%). For extraction of allophycocyanin (APC), the duty cycle, solid to liquid ratio, pH and electrical acoustic intensity contributed 29.47, 29.07, 29.03, and 12.43% respectively. Results obtained from Taguchi methodology indicated that enhanced PC (94.10%), PE (95.20%) and APC (90.54%) can be achieved with solid-liquid ratio (0.2 g/ml), electrical acoustic intensity (16.99 w/cm²), duty cycle (75%), and pH 7 than the yield of PBPs obtained under unoptimized condition. In the present study, higher yield of PC (38.99%), PE (20.84%), and APC (11.93%) were attained with UAE compared to yield obtained from homogenized Oscillatoria sp. BTA 170 using 0.05 M phosphate buffer. Batch extraction data of PBPs under UAE was fitted well with the second order model. The values of second-order rate constant (k) were computed as 6.66 × 10^-4, 64.09 × 10^-4 and 1.49 × 10^-4 L/mg/min for extraction of PC, PE and APC respectively. The PBPs exhibited significant antioxidant property and hydrogen peroxide scavenging activity, which were increased with the enhancement of PBPs concentration.

Strategies to Obtain Designer Polymers Based on Cyanobacterial Extracellular Polymeric Substances (EPS)

Biopolymers derived from polysaccharides are a sustainable and environmentally friendly alternative to the synthetic counterparts available in the market. Due to their distinctive properties, the cyanobacterial extracellular polymeric substances (EPS), mainly composed of heteropolysaccharides, emerge as a valid alternative to address several biotechnological and biomedical challenges. Nevertheless, biotechnological/biomedical applications based on cyanobacterial EPS have only recently started to emerge. For the successful exploitation of cyanobacterial EPS, it is important to strategically design the polymers, either by genetic engineering of the producing strains or by chemical modification of the polymers. This requires a better understanding of the EPS biosynthetic pathways and their relationship with central metabolism, as well as to exploit the available polymer functionalization chemistries. Considering all this, we provide an overview of the characteristics and biological activities of cyanobacterial EPS, discuss the challenges and opportunities to improve the amount and/or characteristics of the polymers, and report the most relevant advances on the use of cyanobacterial EPS as scaffolds, coatings, and vehicles for drug delivery.

Characterization and chromium biosorption potential of extruded polymeric substances from Synechococcus mundulus induced by acute dose of gamma irradiation

This study characterized the extruded polymeric substances (EPS) secreted from Synechococcus mundulus cultures under the effect of 2-KGy gamma irradiation dose. The EPS demonstrated seven monosaccharides, two uronic acids and several chemical functional groups: O-H, N-H, =C-H, C=C, C=O, COO-, O-SO₃, C-O-C and a newly formed peak at 1593 cm^-1 (secondary imide). The roughness of EPS was 96.71 nm and only 28.4% total loss in weight was observed at 800 °C with a high degree of crystallinity quantified as CI_DSC (0.722) and CI_XRD (0.718). Preliminary comparative analyses of EPS exhibited high protein content in the radiologically modified (R-EPS) than control (C-EPS). Modified EPS were characterized with a high biosorption efficiency, which could be attributed to its high content of uronic acids, protein and sulphates as well as various saccharide monomers. Data revealed that 0.0213 mg L^-1 h^-1 is the maximum biosorption rate (SBR_max) of Cr(VI) for R-EPS, whereas 0.0204 mg L^-1 h^-1 SBR_max for the C-EPS respectively.

Cyanoflan: A cyanobacterial sulfated carbohydrate polymer with emulsifying properties

The extracellular polysaccharides produced by cyanobacteria have distinctive characteristics that make them promising for applications ranging from bioremediation to biomedicine. In this study, a sulfated polysaccharide produced by a marine cyanobacterial strain and named cyanoflan was characterized in terms of morphology, chemical composition, and rheological and emulsifying properties. Cyanoflan has a 71 % carbohydrate content, with 11 % of sulfated residues, while the protein account for 4 % of dry weight. The glycosidic-substitution analysis revealed a highly branched complex chemical structure with a large number of sugar residues. The cyanoflan high molecular mass fractions (above 1 MDa) and entangled structure is consistent with its high apparent viscosity in aqueous solutions and high emulsifying activity. It showed to be a typical non-Newtonian fluid with pseudoplastic behavior. Altogether, these results confirm that cyanoflan is a versatile carbohydrate polymer that can be used in different biotechnological applications, such as emulsifying/thickening agent in food or cosmetic industries.

Characterization and antitumor activity of the extracellular carbohydrate polymer from the cyanobacterium Synechocystis ΔsigF mutant

Cyanobacterial extracellular carbohydrate polymers are particularly attractive for biotechnological applications. Previously, we determined the monosaccharidic composition of the polymer of a Synechocystis ΔsigF overproducing mutant. Here, we further characterized this polymer, demonstrated that it is possible to recover it in high yields, and successfully use it for biomedical research. This amorphous polymer is formed by a mesh of fibrils/lamellar structures with high porosity, is constituted by high molecular mass fractions, is highly sulfated and displays low viscosity, even in highly concentrated aqueous solutions. FTIR analysis confirmed the presence of several functional groups. We demonstrated that the ΔsigF polymer has strong biological activity, decreasing the viability of melanoma, thyroid and ovary carcinoma cells by inducing high levels of apoptosis, through p53 and caspase-3 activation. Therefore, the ΔsigF Synechocystis mutant is a promising platform for the sustainable production of biological active carbohydrate polymer(s) with the desired characteristics for biomedical applications.

Current states and challenges of salt-affected soil remediation by cyanobacteria

Natural and human activities lead to soil degradation and soil salinization. The decrease of farmlands threatens food security. There are approximately 1 billion ha salt-affected soils all over of world, which can be made available resources after chemical, physical and biological remediation. Nostoc, Anabaena and other cyanobacterial species have outstanding capabilities, such as the ability to fix nitrogen from the air, produce an extracellular matrix and produce compatible solutes. The remediation of salt-affected soil is a complex and difficult task. During the past years, much new research has been conducted that shows that cyanobacteria are effective for salt-affected soil remediation in laboratory studies and field trials. The related mechanisms for both salt tolerance and salt-affected soil remediation were also evaluated from the perspective of biochemistry, molecular biology and systems biology. The effect of cyanobacteria on salt-affected soil is related to nitrogen fixation and other mechanisms. There are complicated interactions among cyanobacteria, bacteria, fungi and the soil. The interaction between cyanobacteria and salt-tolerant plants should be considered if the cyanobacterium is utilized to improve the soil fertility in addition to performing soil remediation. It is critical to re-establish the micro-ecology in salt-affected soils and improve the salt affected soil remediation efficiency. The first challenge is the selection of suitable cyanobacterial strain. The co-culture of cyanobacteria and bacteria is also potential approach. The cultivation of cyanobacteria on a large scale should be optimized to improve productivity and decrease cost. The development of bio-remediating agents for salt-affected soil remediation also relies on other technical problems, such as harvesting and contamination control. The application of cyanobacteria in salt-affected soil remediation will reconstruct green agriculture and promote the sustainable development of human society.

Development of sugarcane resource for efficient fermentation of exopolysaccharide by using a novel strain of Kosakonia cowanii LT-1

This work focuses on the development of non-food fermentation for the cost-effective biosynthesis of exopolysaccharide (EPS) by using a new strain of Kosakonia cowanii LT-1. This novel strain more efficiently utilizes sucrose for EPS production than other glycosyl donors. Comparative transcriptomic analysis is used to understand EPS synthesis promotion and the effects of sucrose on EPS biosynthesis. We speculate that ATP-binding cassette transporter, phosphotransferase, and two-component systems may be the most essential factors for EPS biosynthesis. The enhanced oxidative phosphorylation increases the synthesis rate of ATP to satisfy the energy demands for EPS production with sucrose as the substrate. Sugarcane juice, a cheap raw material, could improve the EPS yield in batch fermentation and achieve approximately 29.66% cost savings for substrate. Our work presents a promising non-food fermentation approach for the synthesis of high-value industrial products.

Mexican Microalgae Biodiversity and State-Of-The-Art Extraction Strategies to Meet Sustainable Circular Economy Challenges: High-Value Compounds and Their Applied Perspectives

In recent years, the demand for naturally derived products has hiked with enormous pressure to propose or develop state-of-the-art strategies to meet sustainable circular economy challenges. Microalgae possess the flexibility to produce a variety of high-value products of industrial interests. From pigments such as phycobilins or lutein to phycotoxins and several polyunsaturated fatty acids (PUFAs), microalgae have the potential to become the primary producers for the pharmaceutical, food, and agronomical industries. Also, microalgae require minimal resources to grow due to their autotrophic nature or by consuming waste matter, while allowing for the extraction of several valuable side products such as hydrogen gas and biodiesel in a single process, following a biorefinery agenda. From a Mexican microalgae biodiversity perspective, more than 70 different local species have been characterized and isolated, whereas, only a minimal amount has been explored to produce commercially valuable products, thus ignoring their potential as a locally available resource. In this paper, we discuss the microalgae diversity present in Mexico with their current applications and potential, while expanding on their future applications in bioengineering along with other industrial sectors. In conclusion, the use of available microalgae to produce biochemically revenuable products currently represents an untapped potential that could lead to the solution of several problems through green technologies. As such, if the social, industrial and research communities collaborate to strive towards a greener economy by preserving the existing biodiversity and optimizing the use of the currently available resources, the enrichment of our society and the solution to several environmental problems could be attained.

Pilot-scale isolation and characterization of extracellular polymeric substances (EPS) from cell-free medium of Spirulina sp. LEB-18 cultures under outdoor conditions

This objective of this work was to monitor the EPS production during the growth of Spirulina sp. LEB-18, evaluate the productivity and to characterize the exopolymers obtained on pilot-scale under outdoor conditions. The production of crude EPS occurred in all phases of biomass growth and was approximately ten folds higher than that biomass concentration of Spirulina sp. LEB-18 at the end cultivation, demonstrating the importance of the use of supernatant after harvesting of Spirulina to obtain high value bioproducts. The EPS extracted by Spirulina sp. LEB-18 are typically heteropolymers with one high molecular weight fraction (polysaccharides) with potential to be utilized as an alternative bioflocculant and another fraction of lower molecular mass (proteins). The presence of uronic acids, pyruvates and acyl groups of carbohydrates or carboxylic groups of amino acids in protein moiety is the main responsible for overall negative charge of EPS, which is also of biotechnological importance. Moreover, due to the pseudoplastic behavior of the solutions and high thermal stability, the obtained EPS can be widely applied in several industrial sectors, thus determining its technological and market potentiality.

High-quality-draft genome sequence of the multiple heavy metal resistant bacterium Pseudaminobacter manganicus JH-7T

Pseudaminobacter manganicus JH-7T (= KCTC 52258T = CCTCC AB 2016107T) is a Gram-staining-negative, aerobic and non-motile strain that was isolated from a manganese mine. The strain JH-7T shows multiple heavy metal resistance and can effectively remove Mn2+ and Cd2+. In addition, it is able to produce exopolysaccharides (EPS), which may contribute to metal remove/adsorption. Thus, strain JH-7T shows a great potential in bioremediation of heavy metal-contaminated environment. In this study, we report the draft genomic sequence of P. manganicus JH-7T and compare it to related genomes. Strain JH-7T has a 4,842,937 bp genome size with a G + C content of 61.2%, containing 4504 protein-coding genes and 71 RNA genes. A large number of putative genes associated with heavy metal resistance and EPS synthesis are found in the genome.