Stability, microstructure and rheological behavior of konjac glucomannan-zein mixed systems

Highly ordered aggregation of soy protein isolate particles for enhanced gel-related properties through konjac glucomannan addition

This study assessed the effect of konjac glucomannan (KGM) on the aggregation of soy protein isolate (SPI) and its gel-related structure and properties. Raman results showed that KGM promoted the rearrangement of SPI to form more β-sheets, contributing to the formation of an ordered structure. Atomic force microscopy, confocal laser scanning microscopy, and small-angle X-ray scattering results indicated that KGM reduced the size of SPI particles, narrowed their size distribution, and loosened the large aggregates formed by the stacking of SPI particles, improving the uniformity of gel system. As the hydrogen bonding between the KGM and SPI molecules enhanced, a well-developed network structure was obtained, further reducing the immobilized water's content (T22) and increasing the water-holding capacity (WHC) of SPI gel. Furthermore, this gel structure showed improved gel hardness and resistance to both small and large deformations. These findings facilitate the design and production of SPI-based gels with desired performance.

Konjac glucomannan-based composite materials: Construction, biomedical applications, and prospects

Konjac glucomannan (KGM) as an emerging natural polymer has attracted increasing interests owing to its film-forming properties, excellent gelation, non-toxic characteristics, strong adhesion, good biocompatibility, and easy biodegradability. Benefiting from these superior performances, KGM has been widely applied in the construction of multiple composite materials to further improve their intrinsic performances (e.g., mechanical strength and properties). Up to now, KGM-based composite materials have obtained widespread applications in diverse fields, especially in the field of biomedical. Therefore, a timely review of relevant research progresses is important for promoting the development of KGM-based composite materials. Innovatively, firstly, this review briefly introduced the structure properties and functions of KGMs based on the unique perspective of the biomedical field. Then, the latest advances on the preparation and properties of KGM-based composite materials (i.e., gels, microspheres, films, nanofibers, nanoparticles, etc.) were comprehensively summarized. Finally, the promising applications of KGM-based composite materials in the field of biomedical are comprehensively summarized and discussed, involving drug delivery, wound healing, tissue engineering, antibacterial, tumor treatment, etc. Impressively, the remaining challenges and opportunities in this promising field were put forward. This review can provide a reference for guiding and promoting the design and biomedical applications of KGM-based composites.

Tea saponin-Zein binary complex as a quercetin delivery vehicle: preparation, characterization, and functional evaluation

In this study, in order to solve the application problems of poor water solubility and low bioavailability of quercetin, we prepared a nano-delivery system with core-shell structure by anti-solvent method, including a hydrophilic shell composed of tea saponin and a hydrophobic core composed of Zein, which was used to improve the delivery efficiency and biological activity of quercetin. Through the optimal experiments, the loading rate and encapsulation rate of nanoparticles reached 89.41 % and 7.94 % respectively. And the water solubility of quercetin is improved by 30.16 times. At the same time, the quercetin acted with Zein through non-covalent interaction and destroyed its spatial network through structural characterization, while tea saponin covered the surface of Zein through electrostatic interaction, making it change into amorphous state. In addition, the addition of tea saponin makes the nanoparticles remain stable under the changes of external environment. During simulating gastrointestinal digestion procedure, ZQTNPs has higher release rate and bioavailability than free quercetin. Importantly, ZQTNPs can overcome the limitations of a single substance through synergy. These results will promote the innovative development of quercetin precision nutrition delivery system.

Improvement of mechanical, barrier properties, and water resistance of konjac glucomannan/curdlan film by zein addition and the coating for cherry tomato preservation

The mechanical, barrier properties, and water resistance of packaging materials are crucial for the preservation of fruits and vegetables. In this study, zein was incorporated as a hydrophobic substance into the konjac glucomannan (KGM)/curdlan (KC) system. The KC/zein (KCZ) showed good compatibility with the zein aggregates uniformly distributed in the network formed by an entanglement of KGM and curdlan micelles based on hydrogen bonds. The presence of zein inhibited the extension of the KC entangled structure and enhanced the solid-like behavior. The high content of zein (>6 %) increased zein aggregation and negatively affected the structure and properties of KCZ. The zein addition significantly improved the water vapor permeability, tensile strength, and elongation at break. The hydrophobicity of the KCZ films was significantly enhanced, accompanied by the water contact angle increasing from 81° to 112°, and the moisture content, swelling, and soluble solid loss ratio decreasing apparently. The K56C40Z4 coating exhibited an excellent preservation effect to inhibit the respiration of cherry tomatoes, significantly reducing the water loss and firmness decline and maintaining the appearance, total solid, total acid, and ascorbic acid content. This work provided a strategy to fabricate hydrophobic packaging for the preservation of fruits and vegetables.

Konjac glucomannan films incorporated pectin-stabilized Mandarin oil emulsions: Structure, properties, and application in fruit preservation

To enhance the water-resistance and antibacterial properties of KGM films, mandarin oil (MO), was directly emulsified by pectin and then dispersed to the KGM matrix. The effect of MO concentration (0, 0.5, 1.0, 1.5, and 2 wt%) on the performance of the film-forming emulsions as well as the emulsion films was investigated. The results revealed that pectin could encapsulate and protect MO, and KGM as film matrix could further contributed to the high stability of the film-forming emulsions. The FT-IR, XRD, and SEM suggested that MO stabilized by pectin was uniformly distributed in the KGM matrix. The compatibility and good interaction between KGM and pectin contributed to highly dense and compact structure. Furthermore, increasing the concentration of MO effectively improved water-resistance, oxygen barrier, and antimicrobial activity of the KGM based films. The 1.5 wt% MO loaded KGM film had the highest tensile strength (72.22 MPa) and water contact angle (θ = 95.73°), reduced the WVP and oxygen permeability by about 25.8 % and 32.8 times, respectively, prolonged the shelf life of strawberries for 8 days. As demonstrated, the 1.5 wt% MO-loaded KGM film has considerable potential for high-performance natural biodegradable active films to ensure food safety and reduce environmental impacts.

Advances of blend films based on natural food soft matter: Multi-scale structural analysis

The blend films made of food soft matter are of growing interest to the food packaging industries as a pro-environment packaging option. The blend films have become a novel pattern to replace traditional plastics gradually due to their characteristics of biodegradability, sustainability, and environmental friendliness. This review discussed the whole process of the manufacturing of food soft matter blend films from the raw material to the application due to multi-scale structural analysis. There are 3 stages and 12 critical analysis points of the entire process. The raw material, molecular self-assembly, film-forming mechanism and performance test of blend films are investigated. In addition, 11 kinds of blend films with different functional properties by casting are also preliminarily described. The industrialization progress of blend films can be extended or facilitated by analysis of the 12 critical analysis points and classification of the food soft matter blend films which has a great potential in protecting environment by developing sustainable packaging solutions.

Physical stability, microstructure and antimicrobial properties of konjac glucomannan coatings enriched with Litsea cubeba essential oil nanoemulsion and its effect on citruses preservation

This study purposed to develop konjac glucomannan (KGM) based antimicrobial coatings containing Litsea cubeba essential oil nanoemulsion (LNE) for citruses preservation. Physical stability, rheological, structural and antimicrobial properties of the coating solutions were investigated, along with the release characteristics of Litsea cubeba essential oil (LCO). Results showed that the coating solutions displayed shear thinning behavior. The oil droplets were distributed homogeneously in KGM phase with good stability. The coating structure became loose with increasing LNE content due to LNE interfering with molecular interactions and entanglement of KGM. The coating solutions showed stronger antibacterial activity against Escherichia coli than against Staphylococcus aureus and were effective in inhibiting the growth of Penicillium italicum on citrus surfaces. KGM-LNE 10 negatively affected citruses due to phytotoxicity caused by high levels of LCO. LCO was released slowly and continuously from the coatings, and its release was faster in deionized water than in an ethanol-water solution. KGM-LNE 2.5 coated citruses had the least weight loss, the greatest hardness, and kept the minimum changes in total soluble solids, total acid and vitamin C content, implying that KGM-LNE 2.5 best maintained the quality of citruses. The findings suggest that KGM-based coatings containing LNE have high potential for citruses preservation.

Konjac glucomannan-based aerogels with excellent thermal stability and flame retardancy for thermal insulation application

Biomass aerogels are a promising kind of environment-friendly thermal insulation material. However, the flammability, poor water resistance, and thermal instability of biomass aerogels limit their applications. Herein, freeze-drying and thermal imidization were used to create konjac glucomannan (KGM), boron nitride (BN), and polyimide (PI)-based aerogels with a semi-interpenetrating network structure. The introduction of BN was beneficial to improve the mechanical properties and thermal stability of aerogels. The imidization process of PI improved the hydrophobicity, mechanical property, and flame retardancy of the aerogels. The synergistic effect of PI and BN reduced the peak heat release rate and total heat release rate of KGM-based aerogel by 55.8 % and 35 %, respectively, and endowed aerogel with good self-extinguishing performance. Moreover, the results of thermal conductivity and infrared thermal imaging demonstrated that the aerogels had excellent thermal insulation properties, and could effectively manage thermal energy over a wide range of temperatures. This study provides a simple method for the preparation of heat-insulating aerogel with high fire safety, which has broad application prospects in the field of energy saving and emission reduction.

A comparative study of the impacts of preparation techniques on the rheological and textural characteristics of emulsion gels (emulgels)

A subtype of soft solid-like substances are emulsion gels (emulgels; EGs). These composite material's structures either consist of a network of aggregated emulsion droplets or a polymeric gel matrix that contains emulsion droplets. The product's rheological signature can be used to determine how effective it is for a specific application. The interactions between these structured system's separate components and production process, however, have a substantial impact on their rheological imprint. Therefore, rational comprehension of interdependent elements, their structural configurations, and the resulting characteristics of a system are essential for accelerating our progress techniques as well as for fine-tuning the technological and functional characteristics of the finished product. This article presents a comprehensive overview of the mechanisms and procedures of producing EGs (i.e., cold-set and heat-set) in order to determine the ensuing rheological features for various commercial applications, such as food systems. It also describes the influence of these methods on the rheological and textural characteristics of the EGs. Diverse preparation methods are the cause of the rheological-property correlations between different EGs. In many ways, EGs can be produced using various matrix polymers, processing techniques, and purposes. This may lead to various EG matrix structures and interactions between them, which in turn may affect the composition of EGs and ultimately their textural and rheological characteristics.

Investigation and Characterization of Pickering Emulsion Stabilized by Alkali-Treated Zein (AZ)/Sodium Alginate (SA) Composite Particles

Pickering emulsions stabilized by food-grade colloidal particles have attracted increasing attention in recent years due to their "surfactant-free" nature. In this study, the alkali-treated zein (AZ) was prepared via restricted alkali deamidation and then combined with sodium alginate (SA) in different ratios to obtain AZ/SA composite particles (ZS), which were used to stabilize Pickering emulsion. The degree of deamidation (DD) and degree of hydrolysis (DH) of AZ were 12.74% and 6.58% respectively, indicating the deamidation occurred mainly in glutamine on the side chain of the protein. After the treatment with alkali, AZ particle size decreased significantly. Moreover, the particle size of ZS with different ratios was all less than 80 nm. when the AZ/SA ratio was 2:1(Z2S1) and 3:1(Z3S1), the three-phase contact angle (θ_o/w) were close to 90°, which was favorable for stabilizing the Pickering emulsion. Furthermore, at a high oil phase fraction (75%), Z3S1-stabilized Pickering emulsions showed the best long-term storage stability within 60 days. Confocal laser scanning microscope (CLSM) observations showed that the water-oil interface was wrapped by a dense layer of Z3S1 particles with non-agglomeration between independent oil droplets. At constant particle concentration, the apparent viscosity of the Pickering emulsions stabilized by Z3S1 gradually decreased with increasing oil phase fraction, and the oil-droplet size and the Turbiscan stability index (TSI) also gradually decreased, exhibiting solid-like behavior. This study provides new ideas for the fabrication of food-grade Pickering emulsions and will extend the future applications of zein-based Pickering emulsions as bioactive ingredient delivery systems.

Characterizations of konjac glucomannan/curdlan edible coatings and the preservation effect on cherry tomatoes

In this study, konjac glucomannan (KGM) and curdlan were used to fabricate composite coating (KC). The coating solutions were investigated using a rheological method, and the coatings were characterized by water solubility tests, water vapor permeability (WVP), scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), and thermogravimetric analysis (TGA). The preservation effect of KC coating on cherry tomatoes stored at room temperature was determined. Results indicated that the curdlan addition can adjust the hydrophilicity/hydrophobicity of KGM coatings. Curdlan addition enhanced intermolecular entanglement and film-forming property. Increasing curdlan content in KC coatings significantly decreased the moisture content, dissolution and swelling ratio, and WVP. The KGM-curdlan composites behaved as high-performance coatings with good compatibility and uniformity. The K₃C₂ coating showed the best uniformity, water barrier, and thermal stability. The application of K₃C₂ coating significantly reduced the weight loss, decay loss, and delayed the decreases of firmness, soluble solids, total acid, and VC contents of cherry tomatoes. The KGM/curdlan edible coatings have promising potential for prolonging the shelf life of cherry tomatoes and applications in fruits preservation in the future.

Conformational changes and physicochemical attributes of texturized pea protein isolate-konjac gum: With a new perspective of residence time during extrusion

The present study aimed to investigate the effects of different extrusion temperatures (110, 130 and 150 °C) and konjac gum addition (0.1 %, 0.2 %, and 0.3 %) on the flow behavior, physicochemical properties and microstructure of extruded pea protein isolate (PPI). The results showed that the textured protein could be improved by enhancing the extrusion temperature and adding konjac gum during extrusion. The water/oil holding capacity of PPI decreased and the SH content increased after extrusion. With temperature and konjac gum content increased, the β-sheet of extruded proteins transformed to other secondary structural components, and Trp residue transformed to a more polar environment, illustrating the changes in protein conformation. All extruded samples presented as yellow hue with little green and higher lightness, while excessive extrusion process reduced the brightness and promoted more formation of browning pigments. Extruded protein showed more associated layered with some air pores, and its hardness and chewiness increased with the increase of temperature and konjac gum concentration. Cluster analysis showed that the addition of konjac gum could effectively improve the quality characteristics of pea protein under low temperature extrusion, and the effect was similar to that of high temperature extrusion product. With the increase of konjac gum concentration, the flow pattern of protein extrusion gradually converted from plug flow to mixing flow, and the disorder degree of polysaccharide protein mixing system was enhanced. Moreover, Yeh-jaw model showed better fitting effect in F(θ) curves compared to Wolf-white.

Effects of Hydroxypropyl Methylcellulose on Physicochemical Properties and Microstructure of κ-Carrageenan Film

We investigated the effects of different proportions of hydroxypropyl methylcellulose (HPMC) on the properties of κ-carrageenan film. Biodegradable κ-carrageenan/HPMC films (κCHM film) were prepared by the solution casting method and their physicochemical properties were evaluated. The results show that the addition of HPMC enhanced oxygen barrier capacity, mechanical properties (tensile strength and elongation at break) and thermal stability. Notably, when the addition of HPMC increased to 6% of κ-carrageenan (w:w), the κCHM-6 film not only effectively improved water resistance, including lower water solubility, water vapor permeability and higher water contact angle, but also made the structure of the κCHM-6 film more compact. Moreover, rheological measurement and atomic force microscopy characterization showed that κ-carrageenan had suitable compatibility with HPMC. Attenuated total reflection–Fourier transform infrared spectroscopy analysis further confirmed the enhancement of hydrogen bond interactions. This finding could contribute to promoting the potential application of κCHM film in food packaging.

Rheology and Tribology of Ethylcellulose-Based Oleogels and W/O Emulsions as Fat Substitutes: Role of Glycerol Monostearate

Rheological and tribological properties of oleogels and water-in-oil (W/O) emulsions are important for application in fat substitutes. This study investigated the roles of glycerol monostearate (GMS) in tailoring the structural, rheological and tribological properties of ethylcellulose (EC)-based oleogels and W/O emulsions as potential fat substitutes. The addition of GMS contributed to more round and compact oil pores in oleogel networks. The oleogel with 5% GMS had higher crystallinity, leading to solid state (lower tanδ value), mechanical reversibility (higher thixotropic recovery), but a brittle (lower critical strain) structure in the samples. GMS gave the oleogels and emulsions higher oil binding capacity, storage modulus and yield stress. Under oral processing conditions, GMS addition contributed to higher textural attributes and viscosity. Friction coefficients in mixed and boundary regions of oleogels and emulsions were reduced with the increase in GMS content from 0~2%, but increased with 5% GMS. Rheological and tribological properties of lard, mayonnaise and cream cheese can be mimicked by EC oleogels with 5% GMS, or emulsions with 2% GMS and 2-5% GMS, respectively. The study showed the potentials of oleogel and W/O emulsions in designing low-fat products by tuning the structures for healthier and better sensory attributes.

Structural characterization and antibacterial properties of konjac glucomannan/soluble green tea powder blend films for food packaging

Antimicrobial activity is a promising property for food packaging which could prolong the shelf life of food products. In this paper, the physicochemical and antimicrobial properties of konjac glucomannan (KGM)/soluble green tea powder (SGTP) edible films were firstly prepared and analyzed through light barrier properties, Fourier transform infrared spectroscopy (FT-IR), tensile strength (TS), X-ray diffraction (XRD), thermogravimetric analysis and scanning electron microscope (SEM). The results showed that appropriate addition of SGTP could improve the TS of composite films. With the increase of SGTP content, the transmittance of the films in the ultraviolet region decreased obviously, and the thermal stability was improved in a SGTP dependent manner. KGM/SGTP films present a fairly smooth and flat surface without any fracture when 0.5% SGTP was provided. The bacteriostatic test showed that the bacteriostatic performance of the composite films against Staphylococcus aureus and Escherichia coli was also significantly enhanced. When 1% SGTP was provided, the zones of inhibition for Escherichia coli and Staphyloccocus aureus reached to 13.45 ± 0.94 mm and 13.76 ± 0.92 mm, respectively. Overall, the KGM/SGTP films showed great potential as bioactive packaging materials to extend food shelf life.

Effect of heat treatment on the structure and stability of Grass pea (Lathyrus sativus) protein isolate/Alyssum homolocarpum seed gum nanoparticles

In the present study, Grass pea protein isolate (GPPI)- Alyssum homolocarpum seed gum (AHSG) complex nanoparticles were formed through two fabrication methods and their physicochemical properties, structure and stability against sodium chloride and different pHs were investigated. Type 1 particles were formed by creating GPPI nanoparticles, and then coating them with AHSG; while Type 2 particles were fabricated through the heat treatment of GPPI-AHSG complexes at 85 °C for 15 min. The preparation methods did not influence the magnitude of electrical charges on biopolymer particles. The particle size analysis revealed that Type 2 particles had lower mean diameter (d = 360.20 nm) compared to Type 1 particles (d = 463.22 nm). Structural properties of Type 1 and Type 2 particles were determined using Fourier transform infrared (FTIR) spectroscopy, X-ray diffractometry (XRD), Differential scanning calorimetry (DSC), Atomic force microscopy (AFM), and transmission electron microscopy (TEM). Hydrogen bonding, electrostatic and hydrophobic interactions were the main driving forces contributed to the formation of both GPPI-AHSG complex particles. Assessments of morphological and structural properties also indicated that both Type 1 and 2 particles had spherical shapes and heat treatment increased the ordered intermolecular structures in biopolymer particles. Type 2 particles had higher denaturation temperature and better pH and salt stability when compared to Type 1 particles. These results indicate that thermal treatment was effective for the fabrication of stable GPPI-AHSG complex nanoparticles.

A novel glucomannan incorporated functionalized carbon nanotube films: Synthesis, characterization and antimicrobial activity

A novel nanocomposite film was developed by incorporating functionalized carbon nanotube (PCNT) and gallic acid (GA) into carboxymethyl konjac glucomannan (CKGM) and gelatin (GL) matrix. The influences of the PCNT content on the structural, morphological, mechanical, barrier, thermal and antimicrobial properties of CKGM/GL nanocomposite film were discussed. The structure of PCNT@CKGM/GL nanocomposite film was characterized by FT-IR, SEM, and AFM. The crystal structure and thermal ability of the film were generated by XRD and TGA-DTG. The analyses of FT-IR revealed that the amide linkage and strong hydrogen bonding were formed between CKGM, GL, and PCNT. Moreover, the characterization of mechanical properties, moisture barrier, and antimicrobial activities indicated the benefits of adding PCNT into CKGM/GL films. The results suggested that the PCNT@CKGM/GL films exhibited antimicrobial activity against Staphylococcus aureus and Escherichia coli. Therefore, such antimicrobial nanocomposite films have the potential of maintaining the quality and prolong the shelf life of food products.

Formation and Characterization of β-Lactoglobulin and Gum Arabic Complexes: the Role of pH

Protein–polysaccharide complexes have received increasing attention as delivery systems to improve the stability and bioavailability of multiple bioactive compounds. However, deep and comprehensive understanding of the interactions between proteins and polysaccharides is still required for enhancing their loading efficiency and facilitating targeted delivery. In this study, we fabricated a type of protein–polysaccharide complexes using food-grade materials of β-lactoglobulin (β-Lg) and gum arabic (GA). The formation and characteristics of β-Lg–GA complexes were investigated by determining the influence of pH and other factors on their turbidity, zeta-potential, particle size and rheology. Results demonstrated that the β-Lg and GA suspension experienced four regimes including co-soluble polymers, soluble complexes, insoluble complexes and co-soluble polymers when the pH ranged from 1.2 to 7 and that β-Lg–GA complexes formed in large quantities at pH 4.2. An increased ratio of β-Lg in the mixtures was found to promote the formation of β-Lg and GA complexes, and the optimal β-Lg/GA ratio was found to be 2:1. The electrostatic interactions between the NH₃⁺ group in β-Lg and the COO⁻ group in GA were confirmed to be the main driving forces for the formation of β-Lg/GA complexes. The formed structure also resulted in enhanced thermal stability and viscosity. These findings provide critical implications for the application of β-lactoglobulin and gum arabic complexes in food research and industry.

Changes in microstructure and rheological properties of konjac glucomannan/zein blend film-forming solution during drying

During film formation at 60 °C, the microstructure and rheological properties of konjac glucomannan (KGM) film-forming solution and KGM/zein blend film-forming solution were investigated. The drying process of film-forming solutions was divided into two stages according to the drying curves. Scanning electron microscopy showed that KGM chains in the blend solution aggregated into thicker chains and formed a molecular network with larger pores. Zein particles grew larger but were homogeneously distributed during drying as observed by confocal laser scanning microscopy. The addition of zein improved the thermal stability of the film-forming solution. As the drying proceeded (up to 8 h), KGM solution exhibited a typical concentrated solution behavior due to molecular entanglement; whereas the blend solution gradually formed a weak gel after 2 h. Complex viscosity data for the film-forming solutions were well-fitted by the power-law model. The information obtained from the study is important for understanding the film-forming mechanism.

Preparation and Characterization of Quercetin-Loaded Zein Nanoparticles by Electrospraying and Study of In Vitro Bioavailability

Quercetin is a hydrophobic flavonoid with high antioxidant activity. However, for biological applications, the bioavailability of quercetin is low due to physiological barriers. For this reason, an alternative is the protection of quercetin in matrices of biopolymers as zein. The objective of this work was to prepare and characterize quercetin-loaded zein nanoparticles by electrospraying and its study of in vitro bioavailability. The physicochemical parameters such as viscosity, density, and electrical conductivity of zein solutions showed a dependence of the ethanol concentration. In addition, rheological parameters demonstrated that solutions of zein in aqueous ethanol present Newtonian behavior, rebounding in the formation of nanoparticles by electrospraying, providing spherical, homogeneous, and compact morphologies, mainly at a concentration of 80% (v/v) of ethanol and of 5% (w/v) of zein. The size and shape of quercetin-loaded zein nanoparticles were studied by transmission electron microscopy (TEM), observing that it was entrapped, distributed throughout the nanoparticle of zein. Analysis by Fourier transform-infrared (FT-IR) of zein nanoparticles loaded with quercetin revealed interactions via hydrogen bonds. The efficacy of zein nanoparticles to entrap quercetin was particularly high for all quercetin concentration evaluated in this work (87.9 ± 1.5% to 93.0 ± 2.6%). The in vitro gastrointestinal release of trapped quercetin after 240 min was 79.1%, while that for free quercetin was 99.2%. The in vitro bioavailability was higher for trapped quercetin (5.9%) compared to free quercetin (1.9%), than of gastrointestinal digestion. It is concluded, that the electrospraying technique made possible the obtention of quercitin-loaded zein nanoparticles increasing their bioavailability. PRACTICAL APPLICATION: This type of nanosystems can be used in the food and pharmaceutical industry. Quercetin-loaded zein nanoparticles for its improvement compared to free quercetin can be used to decrease the prevalence of chronic degenerative diseases by increasing of the bioavailability of quercetin in the bloodstream. Other application can be as an antioxidant system in functional foods or oils to increase shelf life.