A novel, green, low-cost chitosan-starch hydrogel as potential delivery system for plant growth-promoting bacteria

Building blocks toward sustainable biofertilizers: variation in arbuscular mycorrhizal spore germination when immobilized with diazotrophic bacteria in biodegradable hydrogel beads

AIM

We investigated whether there was interspecies and intraspecies variation in spore germination of 12 strains of arbuscular mycorrhizal fungi when co-entrapped with the diazotrophic plant growth-promoting bacteria, Azospirillum brasilense Sp7 in alginate hydrogel beads.

METHODS AND RESULTS

Twelve Rhizophagus irregularis, Rhizophagus intraradices, and Funneliformis mosseae strains were separately combined with a live culture of Azospirillum brasilense Sp7. Each fungal-bacterial consortia was supplemented with sodium alginate to a 2% concentration (v/v) and cross-linked in calcium chloride (2% w/v) to form biodegradable hydrogel beads. One hundred beads from each combination (total of 1200) were fixed in solidified modified Strullu and Romand media. Beads were observed for successful spore germination and bacterial growth over 14 days. In all cases, successful growth of A. brasilense was observed. For arbuscular mycorrhizal fungi, interspecies variation in spore germination was observed, with R. intraradices having the highest germination rate (64.3%), followed by R. irregularis (45.5%) and F. mosseae (40.3%). However, a difference in intraspecies germination was only observed among strains of R. irregularis and F. mosseae. Despite having varying levels of germination, even the strains with the lowest potential were still able to establish with the plant host Brachypodium distachyon in a model system.

CONCLUSIONS

Arbuscular mycorrhizal spore germination varied across strains when co-entrapped with a diazotrophic plant growth-promoting bacteria. This demonstrates that hydrogel beads containing a mixed consortium hold potential as a sustainable biofertilizer and that compatibility tests remain an important building block when aiming to create a hydrogel biofertilizer that encases a diversity of bacteria and fungi. Moving forward, further studies should be conducted to test the efficacy of these hydrogel biofertilizers on different crops across varying climatic conditions in order to optimize their potential.

Synthesis and Characterization of Triticale Starch-Based Hydrogel for pH Responsive Controlled Diffusion

Considering the FAO perspectives for agriculture toward 2030, many natural sources will be no longer profitable for the synthesis of many biomaterials. Triticale (X Triticosecale Wittmack) is a cereal crop synthesized to withstand those marginal conditions; however, it is primarily used as fodder worldwide. We reported for the first time the synthesis of a natural anionic hydrogel with gastrointestinal pH stimulus-response as a new alternative of smart material, based on Eronga triticale starch as sustainable biomass, using citrate (pK a ∼3.1, 4.7, and 6.4) as cross-linking agent. The scanning electron microscopy and X-ray diffraction exhibited A and B-type starch granules, and semicrystallinity A-type. The presence of the anionic sensing group (COOH) was verified by infrared spectroscopy, the interactions by hydrogen bonds between starch and glycerol and esterification between starch and citric acid were identified by 1H NMR spectra, and through thermal analysis hydrogels exhibited four endothermic curves (179-319 °C, ∼0.711-39 kJ/mol E a). The results showed that the slight addition of glycerol increases the thermal stability, but a higher amount of glycerol decreases the intermolecular forces affecting the thermal stability contrary, the mechanical properties could be benefited. The rheological analyses showed viscoelastic tendency (G' > G″) with high stability (Tanδ < 1) in frequency, time, and strain sweeps. Gastrointestinal pH sensitivity (∼2-7.8) was verified (α ≤ 0.01) following Fick's diffusive parameters, which resulted in a tendency to gradually release BSA with increasing pH ∼3-7 by anomalous and case-II diffusion, showing greater release at pH ∼7.8/3.5 h (80-96%). We aim to expand the biomaterials area focusing on triticale starch due to its limited reported investigations, low-cost, green modification, and its rheological performance as plastic.

Design and evaluation of fluorescent chitosan-starch hydrogel for drug delivery and sensing applications

Composite bio-based hydrogels have been obtaining a significant attention in recent years as one of the most promising drug delivery systems. In the present study, the preparation of composite chitosan-starch hydrogel using maleic acid as a cross-linker was optimized with the help of response surface methodology. The synthesized hydrogel was fluorescent owing to clustering of large number of functional groups. Different analytical techniques, including XRD, FTIR, SEM, XPS, fluorescence and BET were utilized to characterize the prepared hydrogel. XRD analysis confirmed the formation of non-crystalline hydrogel with random arrangement of macromolecular chains. The composite hydrogel exhibited good swelling percentage with pH sensitivity, hemocompatibility and degradability. BET analysis confirmed that the variation in concentration of crosslinker significantly influences the pore volume of the hydrogel. The synthesized composite chitosan-starch hydrogel was utilized as a prospective candidate for controlling drug release. Cefixime as a model drug was loaded onto the synthesized hydrogel utilizing the swelling diffusion method. SEM micrographs showed uniform distribution of drug molecules in the drug loaded hydrogel. In vitro drug release experiments indicated the swelling dependent drug release behaviour of chitosan-starch hydrogel with higher drug release at pH 7.4 (93.08 %) compared to pH 1.2 (67.85 %). The composite chitosan-starch hydrogel was able to prolong and control the drug release up to 12 h. The drug release from the hydrogel followed Korsmeyer-Peppas and Makoid-Banakar model with Fickian diffusion mechanism. Further, the composite hydrogel displayed excitation dependent fluorescence emission with most intense blue emission band at 425 nm with an excitation wavelength of 350 nm. The inclusion of cefixime drug in the hydrogel matrix significantly reduced the fluorescence intensity; the decrease was linearly correlated to the concentration of the drug. Moreover, the fluorescence emission the chitosan-starch hydrogel was found to be dependent upon pH. The synthesized hydrogel is expected to be a potential candidate for controlled drug release as well as for fluorescent sensing applications.

Starch-chitosan blends: A comprehensive review on the preparation, physicochemical properties and applications

Starch and chitosan, polysaccharides derived from natural sources, have significant potential across various domains. Starch is extracted from starch-bearing plants, such as potatoes, whereas chitosan is obtained from the exoskeletons of marine animals, fungi and insects. However, the original forms of starch and chitosan have several limitations, such as low solubility and weak mechanical strength. Interestingly, the combined effects of starch and chitosan resulted in the development of starch-chitosan blends with markedly improved functional properties. These blends demonstrated high tensile strength, improved hydrophilicity and increased adsorption capacity. Furthermore, modification of starch-chitosan blends by techniques such as crosslinking and incorporation of other functional materials contributes to diverse characteristics and functionalities. This review addresses a crucial gap in the literature by providing an overview and up-to-date analysis of starch-chitosan blends. The preparation methods and functional properties of these blends in various forms, such as films, beads and hydrogels, have been extensively discussed. Emphasis is placed on the versatile applications of these blends in research, development and industries such as pharmaceuticals, wastewater treatment, agriculture and food technology. This review aims to provide an insightful overview of starch-chitosan blends and stimulate broader interdisciplinary research interests. By providing concluding insights and prospects, this review highlights the potential for further exploration of the impact of starch-chitosan blends on consumers and the environment.

Ecofriendly Controlled-Release Insecticide Carrier: pH-/Temperature-Responsive Rosin-Derived Hydrogels for Avermectin Delivery against Mythimna separata (Walker)

The exploration of environmentally friendly, less toxic, sustained-release insecticide is increasing with the growing demand for food to meet the requirements of the expanding population. As a sustained-release carrier, the unique, environmentally friendly intelligent responsive hydrogel system is an important factor in improving the efficiency of insecticide utilization and accurate release. In this study, we developed a facile approach for incorporating the natural compound rosin (dehydroabietic acid, DA) and zinc ions (Zn2+) into a poly(N-isopropylacrylamide) (PNIPAM) hydrogel network to construct a controlled-release hydrogel carrier (DA-PNIPAM-Zn2+). Then, the model insecticide avermectin (AVM) was encapsulated in the carrier at a drug loading rate of 36.32% to form AVM@DA-PNIPAM-Zn2+. Surprisingly, the smart controlled carrier exhibited environmental responsiveness, strongly enhanced mechanical properties, self-healing ability, hydrophobicity, and photostability to ensure a balance between environmental friendliness and the precision of the drug release. The release experiments showed that the carboxyl and amide groups in the polymer chains alter the intermolecular forces within the hydrogel meshes and ingredient diffusion by changing temperatures (25 and 40 °C) and pH values (5.8, 7.4, and 8.5), leading to different release behaviors. The insecticidal activity of the AVM@DA-PNIPAM-Zn2+ against oriental armyworms was good, with an effective minimum toxicity toward aquatic animals. Therefore, AVM@DA-PNIPAM-Zn2+ is an effective drug delivery system against oriental armyworms. We anticipate that this ecofriendly, sustainable, smart-response carrier may broaden the utilization rosin and its possible applications in the agricultural sector.

Development of chitosan/carrageenan macrobeads for encapsulation of Paenibacillus polymyxa and its biocontrol efficiency against clubroot disease in Brassica crops

Clubroot, caused by the obligate parasite Plasmodiophora brassicae, is one of the most important diseases of brassicas. The antagonistic bacterium Paenibacillus polymyxa ZF129 can suppress clubroot while its effectiveness is often unstable. To control clubroot more effectively, the macrobeads for controlled release of ZF129 were prepared using microencapsulation technology. Macrobeads with various ratios of chitosan (2 % w/w): carrageenan (0.3 % w/v) were prepared by an ionotropic gelation method and the bacteria ZF129 was loaded into macrobeads. The 1:1 chitosan: carrageenan showed the maximum swelling ratio (634 %), and the maximum survival rate (61.52 ± 1.12 %) after freeze-drying. Fourier transform infrared revealed the electrostatic interactions between chitosan and carrageenan. The macrobeads can efficiently release ZF129 strains into phosphate buffer solution and reach equilibrium in 48 h. The maximum number of bacteria cells to be released in the soil was observed after 25-30 days. The control efficacy of ZF129 macrobeads (chitosan: carrageenan, 1:1) and ZF129 culture against clubroot disease was 76.33 ± 3.65 % and 59.76 ± 4.43 % in greenhouse experiments, respectively and the control efficacy was calculated as 60.74 ± 5.00 % for ZF129 macrobeads and 40.94 ± 4.05 % for ZF129 culture under field experiments, respectively. The ZF129 macrobeads had significant growth-promoting effects on pak choi and Chinese cabbage. The encapsulation method described in this study is a prudent approach toward efficient biopesticides utilization with reduced environmental implications.

Hydrogel capsules as new approach for increasing drying survival of plant biostimulant gram-negative consortium

Several plant growth-promoting bacteria (PGPB) are gram-negative, and their cell viability is affected during the bio-inoculant production. Hence, formulation-drying processes provide challenges that limit the adoption of these beneficial microorganisms in sustainable agricultural production. Among delivery system strategies for gram-negative PGPB, the encapsulating cells in biopolymeric materials are emerging as a promising alternative. This research aims to evaluate the effect of additives and crosslinking agents on the survival of the consortium of Herbaspirillum frisingense AP21, Azospirillum brasilense D7, and Rhizobium leguminosarum T88 in hydrogel capsules. Three crosslinkers and diverse potential drying protectors were tested. Calcium gluconate provides notable consortium survival advantages regarding colony-forming units (CFUs) (losses of up to 4 log CFU) compared to calcium lactate and calcium chloride (up to 6 log CFU). Additives such as skimmed milk, whey protein, and Gelita® EC improve the recovery of viable cells after the drying process, demonstrating an increase in cell survival of the three bacteria by up to 4 log CFU. The combination of these substances into a capsule prototype extends the storage stability of bacterial consortium up to 3 months at 18 ± 2 °C. This study expands the knowledge for formulating gram-negative PGPB consortium, regarding the crosslinker and drying protector relationship on encapsulation processes with drying survival and further storage stability performance. KEY POINTS: • Hydrogel immobilization formulation approach for PGPB consortium • Enhancing drying survival of gram-negative PGPB consortium • Increasing storage stability of PGPB consortium at 18 °C.

Effect of Sodium Hydroxide and Tripolyphosphate on Curcumin Release from Chitosan-Based Macroparticles

This work deals with the synthesis of bare and curcumin (CUR)-loaded chitosan (CS)-based macroparticles by ionic gelation using sodium hydroxide (NaOH) or sodium tripolyphosphate (TPP). The resulting spherical-shaped macroparticles were studied using various characterization techniques, Scanning Electron Microscopy (SEM), Fourier Transform Infrared Spectroscopy (FTIR), Thermogravimetric Analysis (TGA), and Differential Scanning Calorimetry (DSC). The release of CUR from the CS-based particles with respect to time was analyzed, and the encapsulation efficiency and degree of swelling were studied. All formulations showed excellent CUR trapping efficiency, exceeding 90%. In particular, the TPP-crosslinked macrobeads released 34 wt% of the charged CUR within minutes, while the remaining 66 wt% was released slowly. The results indicate that the correct choice of gelling agent and its concentration leads to spherical particles capable of encapsulating CUR and releasing it in a wide range of kinetics so that macrospheres can be used in different applications.

Significance of biopolymer-based hydrogels and their applications in agriculture: a review in perspective of synthesis and their degree of swelling for water holding

Hydrogels are three-dimensional polymer networks that are hydrophilic and capable of retaining a large amount of water. Hydrogels also can act as vehicles for the controlled delivery of active compounds. Bio-polymers are polymers that are derived from natural sources. Hydrogels prepared from biopolymers are considered non-toxic, biocompatible, biodegradable, and cost-effective. Therefore, bio-polymeric hydrogels are being extensively synthesized and used all over the world. Hydrogels based on biopolymers finds important applications in the agricultural field where they are used as soil conditioning agents as they can increase the water retention ability of soil and can act as a carrier of nutrients and other agrochemicals. Hydrogels are also used for the controlled delivery of fertilizer to plants. In this review, bio-polymeric hydrogels based on starch, chitosan, guar gum, gelatin, lignin, and alginate polymer have been discussed in terms of their synthesis method, swelling behavior, and possible agricultural application. The urgency to address water scarcity and the need for sustainable water management in agriculture necessitate the exploration and implementation of innovative solutions. By understanding the synthesis techniques and factors influencing the swelling behavior of these hydrogels, we can unlock their full potential in fostering sustainable agriculture and mitigating the challenges posed by an ever-changing environment.

Encapsulated plant growth regulators and associative microorganisms: Nature-based solutions to mitigate the effects of climate change on plants

Over the past decades, the atmospheric CO₂ concentration and global average temperature have been increasing, and this trend is projected to soon become more severe. This scenario of climate change intensifies abiotic stress factors (such as drought, flooding, salinity, and ultraviolet radiation) that threaten forest and associated ecosystems as well as crop production. These factors can negatively affect plant growth and development with a consequent reduction in plant biomass accumulation and yield, in addition to increasing plant susceptibility to biotic stresses. Recently, biostimulants have become a hotspot as an effective and sustainable alternative to alleviate the negative effects of stresses on plants. However, the majority of biostimulants have poor stability under environmental conditions, which leads to premature degradation, shortening their biological activity. To solve these bottlenecks, micro- and nano-based formulations containing biostimulant molecules and/or microorganisms are gaining attention, as they demonstrate several advantages over their conventional formulations. In this review, we focus on the encapsulation of plant growth regulators and plant associative microorganisms as a strategy to boost their application for plant protection against abiotic stresses. We also address the potential limitations and challenges faced for the implementation of this technology, as well as possibilities regarding future research.

Azospirillum brasilense AbV5/6 encapsulation in dual-crosslinked beads based on cationic starch

The main challenge of agriculture is feeding the growing population and at the same time providing environmental sustainability. Using Azospirillum brasilense as a biofertilizer has proved to be a promising solution. However, its prevalence in soil has not been efficient due to biotic and abiotic stresses. Thus, to overcome this drawback, we encapsulated the A. brasilense AbV5 and AbV6 strains in a dual-crosslinked bead based on cationic starch. The starch was previously modified with ethylenediamine by an alkylation approach. Then, the beads were obtained by a dripping technique, crosslinking sodium tripolyphosphate with a blend containing starch, cationic starch, and chitosan. The AbV5/6 strains were encapsulated into the hydrogel beads by a swelling diffusion method followed by desiccation. Plants treated with encapsulated AbV5/6 cells showed an increase in the root length by 19 %, shoot fresh weight by 17 %, and the content of chlorophyll b by 71 %. The encapsulation of AbV5/6 strains showed to keep A. brasilense viability for at least 60 days and efficiency to promote maize growth.

Exploring the roles of starch for microbial encapsulation through a systematic mapping review

Microorganism encapsulation protects them from stressful conditions and assists in maintaining their viability, being especially beneficial when the carrier material is a renewable and biodegradable biopolymer, such as starch. Here, a systematic mapping was performed to provide a current overview on the use of starch-based systems for microbial encapsulation. Following well-established guidelines, a systematic mapping was conducted and the following could be drawn: 1) there was a significant increase in publications on microbial encapsulation using starch over the past decade, showing interest from the scientific community, 2) ionotropic gelation, emulsification and spray drying are the most commonly used techniques for starch-based microbial encapsulation, and 3) starch play important functions in the encapsulation matrix such as assisting in the survival of the microorganisms. The information gathered in this systematic mapping can be useful to guide researchers and industrial sectors on the development of innovative starch-based systems for microbial encapsulation.

Application of Data Modeling, Instrument Engineering and Nanomaterials in Selected Medid the Scientific Recinal Plant Tissue Culture

At present, most precious compounds are still obtained by plant cultivation such as ginsenosides, glycyrrhizic acid, and paclitaxel, which cannot be easily obtained by artificial synthesis. Plant tissue culture technology is the most commonly used biotechnology tool, which can be used for a variety of studies such as the production of natural compounds, functional gene research, plant micropropagation, plant breeding, and crop improvement. Tissue culture material is a basic and important part of this issue. The formation of different plant tissues and natural products is affected by growth conditions and endogenous substances. The accumulation of secondary metabolites are affected by plant tissue type, culture method, and environmental stress. Multi-domain technologies are developing rapidly, and they have made outstanding contributions to the application of plant tissue culture. The modes of action have their own characteristics, covering the whole process of plant tissue from the induction, culture, and production of natural secondary metabolites. This paper reviews the induction mechanism of different plant tissues and the application of multi-domain technologies such as artificial intelligence, biosensors, bioreactors, multi-omics monitoring, and nanomaterials in plant tissue culture and the production of secondary metabolites. This will help to improve the tissue culture technology of medicinal plants and increase the availability and the yield of natural metabolites.

Perspectives on the Use of Biopolymeric Matrices as Carriers for Plant-Growth Promoting Bacteria in Agricultural Systems

The subject of this review is to discuss some aspects related to the use of biopolymeric matrices as carriers for plant-growth promoting bacteria (PGPB) in agricultural systems as a possible technological solution for the establishment of agricultural production practices that result in fewer adverse impacts on the environment, reporting some promising and interesting results on the topic. Results from the encapsulation of different PGPB on alginate, starch, chitosan, and gelatin matrices are discussed, systematizing some advances made in this area of knowledge in recent years. Encapsulation of these bacteria has been shown to be an effective method for protecting them from unsuitable environments, and these new products that can act as biofertilizers and biopesticides play an important role in the establishment of a sustainable and modern agriculture. These new products are technological solutions for replacing deleterious chemical fertilizers and pesticides, maintaining soil fertility and stability, and improving crop productivity and food security. Finally, in the near future, scale-up studies will have to provide new information about the large-scale production of these materials as well as their application in the field under different biotic and abiotic stress conditions.

Confocal imaging of biomarkers at a single-cell resolution: quantifying 'living' in 3D-printable engineered living material based on Pluronic F-127 and yeast Saccharomyces cerevisiae

BACKGROUND

Engineered living materials (ELMs) combine living cells with non-living scaffolds to obtain life-like characteristics, such as biosensing, growth, and self-repair. Some ELMs can be 3D-printed and are called bioinks, and their scaffolds are mostly hydrogel-based. One such scaffold is polymer Pluronic F127, a liquid at 4 °C but a biocompatible hydrogel at room temperature. In such thermally-reversible hydrogel, the microorganism-hydrogel interactions remain uncharacterized, making truly durable 3D-bioprinted ELMs elusive.

METHODS

We demonstrate the methodology to assess cell-scaffold interactions by characterizing intact alive yeast cells in cross-linked F127-based hydrogels, using genetically encoded ratiometric biosensors to measure intracellular ATP and cytosolic pH at a single-cell level through confocal imaging.

RESULTS

When embedded in hydrogel, cells were ATP-rich, in exponential or stationary phase, and assembled into microcolonies, which sometimes merged into larger superstructures. The hydrogels supported (micro)aerobic conditions and induced a nutrient gradient that limited microcolony size. External compounds could diffuse at least 2.7 mm into the hydrogels, although for optimal yeast growth bioprinted structures should be thinner than 0.6 mm. Moreover, the hydrogels could carry whole-cell copper biosensors, shielding them from contaminations and providing them with nutrients.

CONCLUSIONS

F127-based hydrogels are promising scaffolds for 3D-bioprinted ELMs, supporting a heterogeneous cell population primarily shaped by nutrient availability.

Azospirillum baldaniorum Sp245 exploits Pseudomonas fluorescens A506 biofilm to overgrow in dual-species macrocolonies

Biofilms are essential for plant-associated bacteria to colonize their host. In this work, we analysed the interaction of Azospirillum baldaniorum Sp245 and Pseudomonas fluorescens A506 in mixed macrocolony biofilms. We identified certain culture conditions where A. baldaniorum Sp245 exploits P. fluorescens A506 to boost its growth. Azospirillum growth increased proportionally to the initial number of pseudomonads building the biofilm, which in turn were negatively affected in their growth. Physical contact with P. fluorescens A506 was essential for A. baldaniorum Sp245 growth increase. Biofilm ultrastructure analysis revealed that Pseudomonas produces a thick structure that hosts Azospirillum cells in its interior. Additional experimentation demonstrated that Azospirillum growth boost is compromised when interacting with biofilm-deficient Pseudomonas mutants, and that a low oxygen concentration strongly induce A. baldaniorum Sp245 growth, overriding Pseudomonas stimulation. In this line, we used a microaerophilia reporter strain of A. baldaniorum Sp245 to confirm that dual-species macrocolonies contain a higher number of cells under microaerophilic conditions. Taking all the results into consideration, we propose that A. baldaniorum Sp245 can benefit from P. fluorescens A506 partnership in mixed biofilms by taking advantage of the low oxygen concentration and scaffold made up of Pseudomonas-derived matrix, to expand its growth.

Graphene Oxide-alginate Hydrogel for Drawing Water through an Osmotic Membrane

We report the preparation and evaluation of graphene oxide (GO)-enhanced alginate hydrogels for drawing water across an osmotic desalination membrane. GO-incorporated calcium alginate hydrogels (GO-HG) and pure calcium alginate hydrogels (P-HG) were synthesized for this study. Environmental scanning electron microscopy, water contact angle, and water uptake tests showed both samples to be strongly hydrophilic. The synthesized hydrogels demonstrated the ability to successfully and continuously draw water through a selective osmotic membrane in experiments. This was driven by the surface energy gradient-induced negative pressure between the more hydrophilic hydrogel and less hydrophilic membrane surface. The GO-HG was found to draw 21.2% more water than the P-HG, owing to the flexible GO nanosheets, which can be easily incorporated into the hydrogel framework. The GO nanosheets not only offer more hydrophilic functional sites but also enhance the connectivity within the alginate hydrogel framework so as to enhance the water production performance. The average amount of water drawn through the membrane by the GO-HG and the P-HG is 23.4 ± 0.9 g and 19.3 ± 1.8 g, respectively. It was found that no external stimuli were needed as water flows through the hydrogel due to gravitational force. The GO-enhanced alginate hydrogel, combined with the osmotic membrane, is a promising surface energy gradient-driven functional material for water purification and desalination without applying external pressure.

Production of indole-3-acetic acid by Bacillus circulans E9 in a low-cost medium in a bioreactor

Bacillus circulans E9 (now known as Niallia circulans) promotes plant growth-producing indole-3-acetic acid (IAA), showing potential for use as a biofertilizer. In this work, the use of a low-cost medium containing industrial substrates, soybean, pea flour, Solulys, Pharmamedia, yeast extract, and sodium chloride (NaCl), was evaluated as a substitute for microbiological Luria Broth (LB) medium for the growth of B. circulans E9 and the production of IAA. In Erlenmeyer flasks with pea fluor medium (PYM), the maximum production of IAA was 7.81 ± 0.16 μg mL^-1, while in microbiological LB medium, it was 3.73 ± 0.15 μg mL^-1. In addition, an oxygen transfer rate (OTR) of 1.04 kg O₂ m^-3 d^-1 allowed the highest bacterial growth (19.3 ± 2.18 × 10¹⁰ CFU mL^-1) and IAA production (10.7 μg mL^-1). Consequently, the OTR value from the flask experiments was used to define the conditions for the operation of a 1 L stirred tank bioreactor. The growth and IAA production of B. circulans cultured in a bioreactor with PYM medium were higher (8 and 1.6 times, respectively) than those of bacteria cultured in Erlenmeyer flasks. IAA produced in a bioreactor by B. circulans was shown to induce the root system in Arabidopsis thaliana, similar to synthetic IAA. The results of this study demonstrate that PYM medium may be able to be used for the mass production of B. circulans E9 in bioreactors, increasing both bacterial growth and IAA production. This low-cost medium has the potential to be employed to grow other IAA-producing bacterial species.

Biologically enhanced starch bio-ink for promoting 3D cell growth

The excellent rheological property has legitimated the suitability of starch hydrogel for extrusion-based 3D printing. However, the inability to promote cell attachment and migration has precluded the non-modified starch hydrogel from direct applications in the biomedical field. Herein, we develop a novel 3D printable nanocomposite starch hydrogel with highly enhanced biocompatibility for promoting 3D cell growth, by formulating with gelatin nanoparticles and collagen. The rheological evaluation reveals the shear-thinning and thixotropic properties of the starch-based hydrogel, as well as the combinatorial effect of collagen and gelatin nanoparticles on maintaining the printability and 3D shape fidelity. The homogeneous microporous structure with abundant collagen fibers and gelatin nanoparticles interlaced and supplies rich attachment sites for cell growth. Corroborated by the cell metabolic activity study, the multiplied proliferation rate of cells on the 3D printed nanocomposite starch hydrogel scaffold confirms the remarkable enhancement of biological function of developed starch hydrogel. Hence, the developed nanocomposite starch hydrogel serves as a highly desirable bio-ink for advancing 3D tissue engineering.

Alternative methods for the pilot-scale production and characterization of chitosan nanoparticles

This work describes the production/characterization of low molar mass chitosan nanoparticles derived from waste shrimp shells (SSC), as well as from a commercial chitosan (CC). The production of low molar mass nanochitosan employed thermal shock, alternating between 100 °C and ambient temperature, followed by grinding the dry material (SSC and CC) in a ball mill, producing around 500 g of nanochitosan per batch. A highlight of the methodology employed is that it enables nanochitosan to be obtained even from a low quality commercial raw material. All particles had diameters smaller than 223 nm, with an average diameter below 25 nm (determined by DLS), while reductions of molar mass were between 8.4-fold and 13.5-fold. The depolymerization process resulted in a reduction in crystallinity of 38.1 to 25.4% and 55.6 to 25.9% in the CC and SSC samples, respectively. The production of nanochitosans was also confirmed by TEM through the observation of crystalline domains with diameters between 5 and 10 nm. This work perfectly reproduces the results on bench scale from previous research. The simple and inexpensive processes enable easy scale-up, representing an important advance in the production chain of biopolymers. Graphical abstract.

Chitosan grafted/cross-linked with biodegradable polymers: A review

Public perception of polymers has been drastically changed with the improved plastic management at the end of their life. However, it is widely recognised the need of developing biodegradable polymers, as an alternative to traditional petrochemical polymers. Chitosan (CH), a biodegradable biopolymer with excellent physiological and structural properties, together with its immunostimulatory and antibacterial activity, is a good candidate to replace other polymers, mainly in biomedical applications. However, CH has also several drawbacks, which can be solved by chemical modifications to improve some of its characteristics such as solubility, biological activity, and mechanical properties. Many chemical modifications have been studied in the last decade to improve the properties of CH. This review focussed on a critical analysis of the state of the art of chemical modifications by cross-linking and graft polymerization, between CH or CH derivatives and other biodegradable polymers (polysaccharides or proteins, obtained from microorganisms, synthetized from biomonomers, or from petrochemical products). Both techniques offer the option of including a wide variety of functional groups into the CH chain. Thus, enhanced and new properties can be obtained in accordance with the requirements for different applications, such as the release of drugs, the improvement of antimicrobial properties of fabrics, the removal of dyes, or as scaffolds to develop bone tissues.

Revisiting Plant-Microbe Interactions and Microbial Consortia Application for Enhancing Sustainable Agriculture: A Review

The present scenario of agricultural sector is dependent hugely on the use of chemical-based fertilizers and pesticides that impact the nutritional quality, health status, and productivity of the crops. Moreover, continuous release of these chemical inputs causes toxic compounds such as metals to accumulate in the soil and move to the plants with prolonged exposure, which ultimately impact the human health. Hence, it becomes necessary to bring out the alternatives to chemical pesticides/fertilizers for improvement of agricultural outputs. The rhizosphere of plant is an important niche with abundant microorganisms residing in it. They possess the properties of plant growth promotion, disease suppression, removal of toxic compounds, and assimilating nutrients to plants. Utilizing such beneficial microbes for crop productivity presents an efficient way to modulate the crop yield and productivity by maintaining healthy status and quality of the plants through bioformulations. To understand these microbial formulation compositions, it becomes essential to understand the processes going on in the rhizosphere as well as their concrete identification for better utilization of the microbial diversity such as plant growth–promoting bacteria and arbuscular mycorrhizal fungi. Hence, with this background, the present review article highlights the plant microbiome aboveground and belowground, importance of microbial inoculants in various plant species, and their subsequent interactive mechanisms for sustainable agriculture.

Composite Hydrogel of Poly(acrylamide) and Starch as Potential System for Controlled Release of Amoxicillin and Inhibition of Bacterial Growth

Novel composite hydrogels of poly(acrylamide) (PAAm) and starch, at different ratios, were studied as potential platforms for controlled release of amoxicillin. The composite hydrogels were characterized by Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDX), and swelling kinetic measurements. The morphology analysis revealed the presence of starch granules well embedded within the PAAm network. The increase in starch content increased the rate of water uptake and the swelling degree at equilibrium. The amoxicillin release kinetics was sensitive to pH and temperature conditions. The in vitro bacterial growth inhibition of antibiotic-loaded hydrogels was tested though disc diffusion assays with Escherichia coli ATCC 25922, Staphylococcus aureus ATCC 25923, and a carbapenemase producer Pseudomonas aeruginosa strain. The optimal release profile at physiological conditions and the powerful bacteria growth inhibition effects of amoxicillin-loaded hydrogels evidenced its potential for biomedical applications, particularly in oral administration and the local treatment of bacterial infections.

AHL-priming for enhanced resistance as a tool in sustainable agriculture

Bacteria communicate with each other through quorum sensing (QS) molecules. N-acyl homoserine lactones (AHL) are one of the most extensively studied groups of QS molecules. The role of AHL molecules is not limited to interactions between bacteria; they also mediate inter-kingdom interaction with eukaryotes. The perception mechanism of AHL is well-known in bacteria and several proteins have been proposed as putative receptors in mammalian cells. However, not much is known about the perception of AHL in plants. Plants generally respond to short-chained AHL with modification in growth, while long-chained AHL induce AHL-priming for enhanced resistance. Since plants may host several AHL-producing bacteria and encounter multiple AHL at once, a coordinated response is required. The effect of the AHL combination showed relatively low impact on growth but enhanced resistance. Microbial consortium of bacterial strains that produce different AHL could therefore be an interesting approach in sustainable agriculture. Here, we review the molecular and genetical basis required for AHL perception. We highlight recent advances in the field of AHL-priming. We also discuss the recent discoveries on the impact of combination(s) of multiple AHL on crop plants and the possible use of this knowledge in sustainable agriculture.

A Mini-Review on Chitosan-Based Hydrogels with Potential for Sustainable Agricultural Applications

Agriculture is an important sector of the economy, but this industry consumes significant amounts of water, which is a precious and limited natural resource. Irrigation techniques and efforts to mitigate water usage influence the growth, survival, and yield of crops. However, superabsorbent polymers in combination with fertilizers can be employed to obtain sustained release of nutrients and improved water retention capacity of the soil. Despite significant recent progress in this area involving synthetic polyacrylate hydrogels, there are no industrially applicable solutions exhibiting similar performance using natural biopolymers or synthetic polymers enriched with natural components. This review focuses on biodegradable chitosan-based hydrogels (both natural and semi-synthetic), and discusses their potential agricultural and horticultural applications. The methods for synthesizing hydrogels via physical or chemical crosslinking, and the resulting functional properties of recently reported hydrogels, such as water retention and release of active ingredients, are presented herein.

Cationic hydrogels prepared from regioselectively azidated (1→3)-α-d-glucan via crosslinking and amination: Physical and adsorption properties

Cationic hydrogels with amino groups were successfully prepared using (1→3)-α-d-glucan synthesized by glucosyltransferase J (GtfJ) cloned from Streptococcus salivarius through a three-step reaction: (i) Azido groups were regioselectively introduced at the C6 position of (1→3)-α-d-glucan by a bromination-azidation process (degree of substitution 0.94), (ii) Azido groups were partially crosslinked with 1,8-nonadiyne via a copper(I)-catalyzed azide-alkyne cycloaddition (CuAAC) reaction, (iii) Azido groups that were unused for crosslinking were reduced to amino groups by sodium borohydride (NaBH₄). The introduction of amino groups was confirmed quantitatively and qualitatively by elemental, Fourier transform infrared (FT-IR), and nuclear magnetic resonance (NMR) analyses. These cationic hydrogels showed a specific adsorption ability for bovine serum albumin (BSA) over a wide pH range of 4.5-8.0 due to their high pH values at the point of zero charge (pH_pzc 8.80-8.92).

Chitosan-based delivery systems for plants: A brief overview of recent advances and future directions

Chitosan has been termed as the most well-known among biopolymers, receiving widespread attention from researchers in various fields mainly, agriculture, food, and health. Chitosan is a deacetylated derivative of chitin, mainly isolated from waste shells of the phylum Arthropoda after their consumption as food. Chitosan molecules can be easily modified for adsorption and slow release of plant growth regulators, herbicides, pesticides, and fertilizers, etc. Chitosan as a carrier and control release matrix that offers many benefits including; protection of biomolecules from harsh environmental conditions such as pH, light, temperatures and prolonged release of active ingredients from its matrix consequently protecting the plant's cells from the hazardous effects of burst release. In the current review, tends to discuss the recent advances in the area of chitosan application as a control release system. Also, future recommendations will be made in light of current advancements and major gaps.

Formulation of Microbial Inoculants by Encapsulation in Natural Polysaccharides: Focus on Beneficial Properties of Carrier Additives and Derivatives

In the last 10-15 years, the wide application of bioformulated plant beneficial microorganisms is accepted as an effective alternative of chemical agro-products. Two main problems can be distinguished in their production and application: (a) economical competiveness based on the overall up-stream and down-stream operational costs, and (b) development of commercial products with a high soil-plant colonization potential in controlled conditions but not able to effectively mobilize soil nutrients and/or combat plant pathogens in the field. To solve the above problems, microbe-based formulations produced by immobilization methods are gaining attention as they demonstrate a large number of advantages compared to other solid and liquid formulations. This mini-review summarizes the knowledge of additional compounds that form part of the bioformulations. The additives can exert economical, price-decreasing effects as bulking agents or direct effects improving microbial survival during storage and after introduction into soil with simultaneous beneficial effects on soil and plants. In some studies, combinations of additives are used with a complex impact, which improves the overall characteristics of the final products. Special attention is paid to polysaccharide carriers and their derivates, which play stimulatory role on plants but are less studied. The mini-review also focuses on the potential difficulty in evaluating the effects of complex bio-formulations.

Chitosan/glyphosate formulation as a potential, environmental friendly herbicide with prolonged activity

Although there are many reports on the dangers posed by glyphosate, this herbicide is still one of the most popular and widely used total weed killers. Therefore, great effort should be made to minimize exposure to this herbicide and limit its losses into the environment. The aim of this study was to prepare a new formulation consisted of various molecular weight chitosans with glyphosate and their evaluation toward active substance release, phytotoxicity, and preliminary herbicidal efficiency. The phytotoxicity study of the obtained chitosan/glyphosate formulations was determined based on the Organisation for Economic Co-operation and Development 208 guideline. Among all tested formulations evaluated for phytotoxicity, that containing the highest molecular weight of chitosan was found to be the least toxic, showing simultaneously the most effective herbicidal activity against selected weeds. The release rate of glyphosate from the obtained formulations was dependent on the molecular weight and viscosity of chitosan.

How rheological behaviors of concentrated starch affect graft copolymerization of acrylamide and resultant hydrogel

Corn starches with different amylose/amylopectin ratios were used to explore the effect of rheological behaviors of concentrated system on the graft copolymerization of acrylamide and resultant hydrogels, which sheds a light on their reactive extrusion process. The viscoelastic moduli of starch melts increased with increasing amylose content (AC), leading to a decreased extent of micro-mixing detected by a reduced rheokinetic rate. With increasing AC, the graft efficiency was decreased but with almost similar monomer conversion (about 87.5%) and nearly equivalent graft content. XRD and SAXS spectra revealed that the extent of retrogradation of the starches were increased and two-phase separation was enhanced for hydrogels with increasing AC. Interestingly, microscopic analysis showed the superabsorbent hydrogel from the starch with AC of 50% exhibited a gridding membrane porous structure, resulting in a higher water absorbent capacity of 550 g/g. This was attributed to the moderate crosslinking and the slightly greater graft content.

A review on the plant microbiome: Ecology, functions, and emerging trends in microbial application

•

Microbiota are important for plant growth, health and stress resilience.

•

Inoculation with key microbiota members can improve plant traits.

•

Tailored selection and delivery of microbial strains or consortia is required.

•

Microbiome improvement may be achieved by appropriate agro-management practices.

•

Plant breeding for improved interaction with microbiota will be of benefit.

Plants have evolved with a plethora of microorganisms having important roles for plant growth and health. A considerable amount of information is now available on the structure and dynamics of plant microbiota as well as on the functional capacities of isolated community members. Due to the interesting functional potential of plant microbiota as well as due to current challenges in crop production there is an urgent need to bring microbial innovations into practice. Different approaches for microbiome improvement exist. On the one hand microbial strains or strain combinations can be applied, however, field success is often variable and improvement is urgently required. Smart, knowledge-driven selection of microorganisms is needed as well as the use of suitable delivery approaches and formulations. On the other hand, farming practices or the plant genotype can influence plant microbiota and thus functioning. Therefore, selection of appropriate farming practices and plant breeding leading to improved plant-microbiome interactions are avenues to increase the benefit of plant microbiota. In conclusion, different avenues making use of a new generation of inoculants as well as the application of microbiome-based agro-management practices and improved plant lines could lead to a better use of the plant microbiome. This paper reviews the importance and functionalities of the bacterial plant microbiome and discusses challenges and concepts in regard to the application of plant-associated bacteria.