Starch/graphene hydrogels via click chemistry with relevant electrical and antibacterial properties

The Diels-Alder Cross-Linked Gelatin/Dextran Nanocomposite Hydrogels with Silver Nanoparticles for Wound Healing Applications: Synthesis, Characterization, and In Vitro Evaluation

Wound healing involves a sophisticated biological process that relies on ideal conditions to advance through various stages of repair. Modern wound dressings are designed to imitate the natural surroundings around cells and offer properties such as moisture regulation, strength, and antimicrobial defense to boost healing. A recent research project unveiled a new type of gelatin (Gel)/dextran (Dex) hydrogels, linked through Diels-Alder (D-A) reactions, loaded with silver nanoparticles (Ag-NPs) for cutting-edge wound treatment. Gel and Dex were chemically modified to form the hydrogels via the D-A reaction. The hydrogels were enriched with Ag-NPs at varying levels. Thorough analyses of the hydrogels using methods like NMR, FT-IR, and SEM were carried out to assess their structure and nanoparticle integration. Rheological tests displayed that the hydrogels had favorable mechanical attributes, particularly when Ag-NPs were included. The hydrogels demonstrated controlled swelling, responsiveness to pH changes, and were non-toxic. Testing against E. coli showcased the strong antibacterial activity of the nanocomposite hydrogels in a concentration-dependent manner. This investigation showcased the promise of these bioactive nanocomposite hydrogels in promoting speedy wound healing by maintaining a moist environment, offering an antimicrobial shield, and ensuring mechanical support at the wound site.

Biomaterial engineering for cell transplantation

The current paradigm of medicine is mostly designed to block or prevent pathological events. Once the disease-led tissue damage occurs, the limited endogenous regeneration may lead to depletion or loss of function for cells in the tissues. Cell therapy is rapidly evolving and influencing the field of medicine, where in some instances attempts to address cell loss in the body. Due to their biological function, engineerability, and their responsiveness to stimuli, cells are ideal candidates for therapeutic applications in many cases. Such promise is yet to be fully obtained as delivery of cells that functionally integrate with the desired tissues upon transplantation is still a topic of scientific research and development. Main known impediments for cell therapy include mechanical insults, cell viability, host's immune response, and lack of required nutrients for the transplanted cells. These challenges could be divided into three different steps: 1) Prior to, 2) during the and 3) after the transplantation procedure. In this review, we attempt to briefly summarize published approaches employing biomaterials to mitigate the above technical challenges. Biomaterials are offering an engineerable platform that could be tuned for different classes of cell transplantation to potentially enhance and lengthen the pharmacodynamics of cell therapies.

2D nanomaterial-based 3D network hydrogels for anti-infection therapy

Two-dimensional nanomaterials (2D NMs) refer to nanomaterials that possess a planar topography with a thickness of one or several atomic layers. Due to their large specific surface areas, atomic thickness, rough edges, and electron confinement in two dimensions, they have emerged as promising antimicrobial agents over antibiotics in combating bacterial infections. However, 2D NMs encounter issues such as low bio-safety, easy aggregation, and limited tissue penetration efficiency. To address these concerns, hydrogels with three-dimensional (3D) networks have been developed to encapsulate 2D NMs, aiming to enhance their biocompatibility, biodegradability, and ability to regulate and remodel the tissue microenvironment at the infected site. This review systematically summarizes the current studies on 2D NM-based antibacterial hydrogels with 3D network structures (named 2N3Hs). Firstly, we introduce the emerging types of 2N3Hs and describe their antibacterial actions. Subsequently, we discuss the applications of 2N3Hs in three biomedical fields, including wound dressing, cancer treatment, and bone regeneration. Finally, we conclude the review with current challenges and future developments for 2N3Hs, highlighting their potential as a promising choice for next-generation biomedical devices, particularly in the field of tissue engineering and regenerative medicine. This review aims to provide a comprehensive and panoramic overview of anti-infective 2N3Hs for various biomedical applications.

Effective reinforcement of plasticized starch by the incorporation of graphene, graphene oxide and reduced graphene oxide

Plasticized starch (PLS) nanocomposite films using glycerol and reinforced with graphene (G) and graphene oxide (GO) were prepared by solvent casting procedure. On one hand, the influence of adding different G contents into the PLS matrix was analyzed. In order to improve the stability of G nanoflakes in water, Salvia extracts were added as surfactants. The resulting nanocomposites presented improved mechanical properties. A maximum increase of 287 % in Young's modulus and 57 % in tensile strength was achieved for nanocomposites with 5 wt% of G. However, it seemed that Salvia acted as co-plasticizer for the PLS. Moreover, the addition of the highest G content led to an improvement of the electrical conductivity close to 5 × 10-6 S/m compared to the matrix. On the other hand, GO was also incorporated as nanofiller to prepare nanocomposites. Thus, the effect of increasing the GO content in the final behavior of the PLS nanocomposites was evaluated. The characterization of GO containing PLS nanocomposites showed that strong starch/GO interactions and a good dispersion of the nanofiller were achieved. Moreover, the acidic treatment applied for the reduction of the GO was found to be effective, since the electrical conductivity was 150 times bigger than its G containing counterpart.

Dual cross-linked starch hydrogel for eugenol encapsulation and the formation of hydrogen bonds on textural hydrogel

Physical and chemical cross-linked hydrogels combining N, N'-Methylenebisacrylamide (MBA)-grafted starch (MBAS) and sorbitol were successfully prepared and encapsulated with eugenol in this work. The dense porous structure with diameter of 10-15 μm and strong skeleton after restructuring inside the hydrogel was confirmed by SEM. The band shifts between 3258 cm^-1 and 3264 cm^-1 clarified the presence of a large number of hydrogen bonds in physical and chemical cross-linked hydrogels. The robust structure of the hydrogel was confirmed by mechanical and thermal property measurements. Molecular docking techniques were used to help understand the bridging pattern between three raw materials and to assess the advantageous conformation, which demonstrate sorbitol is beneficial to improve the characteristics of textural hydrogel by the formation of hydrogen bonds, creating a denser network, structural recombination and new intermolecular hydrogen bonds between starch and sorbitol afforded considerably junction zones. Compared to ordinary starch-based hydrogels, eugenol-loaded starch-sorbitol hydrogels (ESSG) exhibited a more attractive internal structure, swelling properties, viscoelasticity. Moreover, the ESSG showed excellent antimicrobial activity for typical undesired microorganisms in foods.

Recent advances of antibacterial starch-based materials

Starch has attracted a lot of attention because it is biodegradable, renewable, nontoxic and low cost. By adding antibacterial substances to starch, starch-based materials have antibacterial properties. The composite with other materials can improve the comprehensive performance of starch-based materials, thus broadening the application field of the material. In this paper, we focus on antibacterial starch-based materials and review their preparation and applications. It was found that antibacterial starch-based materials were most widely used in packaging, followed by medicine, and the research on smart starch-based materials was relatively less. This review may provide some reference value for subsequent studies of starch-based materials.

Hemicellulose-based hydrogels for advanced applications

Hemicellulose-based hydrogels are three-dimensional networked hydrophilic polymer with high water retention, good biocompatibility, and mechanical properties, which have attracted much attention in the field of soft materials. Herein, recent advances and developments in hemicellulose-based hydrogels were reviewed. The preparation method, formation mechanism and properties of hemicellulose-based hydrogels were introduced from the aspects of chemical cross-linking and physical cross-linking. The differences of different initiation systems such as light, enzymes, microwave radiation, and glow discharge electrolytic plasma were summarized. The advanced applications and developments of hemicellulose-based hydrogels in the fields of controlled drug release, wound dressings, high-efficiency adsorption, and sensors were summarized. Finally, the challenges faced in the field of hemicellulose-based hydrogels were summarized and prospected.

Antibacterial smart hydrogels: New hope for infectious wound management

Millions of people die annually due to uncured wound infections. Healthcare systems incur high costs to treat wound infections. Tt is predicted to become more challenging due to the rise of multidrug-resistant conditions. During the last decades, smart antibacterial hydrogels could attract attention as a promising solution, especially for skin wound infections. These antibacterial hydrogels are termed 'smart' due to their response to specific physical and chemical environmental stimuli. To deliver different drugs to particular sites in a controlled manner, various types of crosslinking strategies are used in the manufacturing process. Smart hydrogels are designed to provide antimicrobial agents to the infected sites or are built from polymers with inherent disinfectant properties. This paper aims to critically review recent pre-clinical and clinical advances in using smart hydrogels against skin wound infections and propose the next best thing for future trends. For this purpose, an introduction to skin wound healing and disease is presented and intelligent hydrogels responding to different stimuli are introduced. Finally, the most promising investigations are discussed in their related sections. These studies can pave the way for producing new biomaterials with clinical applications.

Enhanced Antibacterial Performance of Chitosan/Corn Starch Films Containing TiO2/Graphene for Food Packaging

Chitosan (CTS)/corn starch (CSH)/nano-TiO₂/graphene (Gr) antibacterial active packaging films were prepared by ultrasonic-assisted electrospray deposition and solution-casting methods, and the effects of the TiO₂:Gr mass ratio and ultrasonication power on their morphology and mechanical, optical, thermal, barrier, and antibacterial properties were investigated. The film fabricated at a TiO₂:Gr ratio of 6:4 and an ultrasonication power of 160 W exhibited a uniform distribution of the nanofillers in the CTS/CSH matrix and significantly enhanced the mechanical, barrier, and water-resistance properties. Furthermore, this film demonstrated superior ultraviolet and visible light-shielding characteristics as compared with those of the non-filled CTS/CSH film, while its Escherichia coli and Staphylococcus aureus inhibition efficiencies were equal to 96.67 ± 0.09% and 99.85 ± 0.13%, respectively. Therefore, the film can effectively prevent food spoilage, indicating its potential for food-packaging applications.

Diels-Alder Cycloaddition Reactions in Sustainable Media

Diels–Alder cycloaddition reaction is one of the most powerful strategies for the construction of six-membered carbocyclic and heterocyclic systems, in most cases with high regio- and stereoselectivity. In this review, an insight into the most relevant advances on sustainable Diels–Alder reactions since 2010 is provided. Various environmentally benign solvent systems are discussed, namely bio-based derived solvents (such as glycerol and gluconic acid), polyethylene glycol, deep eutectic solvents, supercritical carbon dioxide, water and water-based aqueous systems. Issues such as method’s scope, efficiency, selectivity and reaction mechanism, as well as sustainability, advantages and limitations of these reaction media, are addressed.

Click Chemistry Hydrogels for Extrusion Bioprinting: Progress, Challenges, and Opportunities

The emergence of 3D bioprinting has allowed a variety of hydrogel-based "bioinks" to be printed in the presence of cells to create precisely defined cell-loaded 3D scaffolds in a single step for advancing tissue engineering and/or regenerative medicine. While existing bioinks based primarily on ionic cross-linking, photo-cross-linking, or thermogelation have significantly advanced the field, they offer technical limitations in terms of the mechanics, degradation rates, and the cell viabilities achievable with the printed scaffolds, particularly in terms of aiming to match the wide range of mechanics and cellular microenvironments. Click chemistry offers an appealing solution to this challenge given that proper selection of the chemistry can enable precise tuning of both the gelation rate and the degradation rate, both key to successful tissue regeneration; simultaneously, the often bio-orthogonal nature of click chemistry is beneficial to maintain high cell viabilities within the scaffolds. However, to date, relatively few examples of 3D-printed click chemistry hydrogels have been reported, mostly due to the technical challenges of controlling mixing during the printing process to generate high-fidelity prints without clogging the printer. This review aims to showcase existing cross-linking modalities, characterize the advantages and disadvantages of different click chemistries reported, highlight current examples of click chemistry hydrogel bioinks, and discuss the design of mixing strategies to enable effective 3D extrusion bioprinting of click hydrogels.

Preparation and characterization of starch-cellulose interpenetrating network hydrogels based on sequential Diels-Alder click reaction and photopolymerization

Herein, starch-cellulose interpenetrating network (IPN) hydrogels were fabricated by sequential Diels-Alder click reaction and photopolymerization in water. Moreover, β-cyclodextrin, a commonly used host molecule in supramolecular chemistry, was also introduced to improve the performance of the IPN hydrogel. Firstly, the starch-based dienes were synthesized by modifying starch with N-maleoyl-β-alanine, and the cellulose-based dienophiles were obtained by the reaction of cellulose and furfurylamide succinate; Secondly, the as-synthesized starch-based dienes, cellulose-based dienophiles, polymerizable β-cyclodextrin, crosslinker, and acrylamide were dissolved in water and obtained a transparent solution. The solution was maintained in a water bath of 50 °C for 3 h, forming the first network via catalyst-free click Diels-Alder reaction, subsequently, the second network was formed by photopolymerization. Their preparation conditions were optimized via one-factor experiments and their properties and structures were characterized. Finally, 5- fluorouracil (5-Fu) was used as a model drug to study the sustained release behavior of the drug-loaded hydrogels. Release profile was found to fit in Ritger-Peppas kinetic model and polymer relaxation and drug diffusion made a valuable contribution to drug release. Taking into account the virtues of easily controllable photopolymerization and catalyst-free Diels-Alder reaction, the strategy described here has a potential application in the preparation of IPN hydrogels.

Thermoplastic Starch-Based Composite Reinforced by Conductive Filler Networks: Physical Properties and Electrical Conductivity Changes during Cyclic Deformation

Conductive polymer composites (CPC) from renewable resources exhibit many interesting characteristics due to their biodegradability and conductivity changes under mechanical, thermal, chemical, or electrical stress. This study is focused on investigating the physical properties of electroconductive thermoplastic starch (TPS)–based composites and changes in electroconductive paths during cyclic deformation. TPS–based composites filled with various carbon black (CB) contents were prepared through melt processing. The electrical conductivity and physicochemical properties of TPS–CB composites, including mechanical properties and rheological behavior, were evaluated. With increasing CB content, the tensile strength and Young’s modulus were found to increase substantially. We found a percolation threshold for the CB loading of approximately 5.5 wt% based on the rheology and electrical conductivity. To observe the changing structure of the conductive CB paths during cyclic deformation, both the electrical conductivity and mechanical properties were recorded in parallel using online measurements. Moreover, the instant electrical conductivity measured online during mechanical deformation of the materials was taken as the parameter indirectly describing the structure of the conductive CB network. The electrical conductivity was found to increase during five runs of repeated cyclic mechanical deformations to constant deformation below strain at break, indicating good recovery of conductive paths and their new formation.

Synthesis and antioxidant activity of the inulin derivative bearing 1,2,3-triazole and diphenyl phosphate

In this paper, the inulin derivative (3) bearing 1,2,3-triazole and diphenyl phosphate was successfully synthesized by CuAAC Click chemistry. Detailed structural characterization was determined using FTIR spectroscopy, ¹H NMR spectroscopy, ¹³C NMR spectroscopy, and elemental analysis. The antioxidant activities against hydroxyl radicals, superoxide radicals, and DPPH radicals were estimated in vitro respectively. The results showed that the antioxidant activity of the inulin derivative (3) was significantly enhanced compared with inulin. The inulin derivative (3) exhibited stronger radical scavenging abilities, especially against hydroxyl radicals and superoxide radicals. The scavenging values of the inulin derivative (3) were 98.2% and 95.4% at 1.6 mg/mL against hydroxyl radicals and superoxide radicals respectively. Besides, the scavenging value of the inulin derivative (3) increased by about 40% to scavenge DPPH radicals at 1.6 mg/mL than inulin. The results showed that the inulin derivative (3) bearing 1,2,3-triazole and diphenyl phosphate exhibited tremendously enhanced antioxidant activity compared with inulin. The synthetic strategy might provide an effective way to prepare novel inulin antioxidant biomaterials.

Cellulose and Graphene Based Polyurethane Nanocomposites for FDM 3D Printing: Filament Properties and Printability

3D printing has exponentially grown in popularity due to the personalization of each printed part it offers, making it extremely beneficial for the very demanding biomedical industry. This technique has been extensively developed and optimized and the advances that now reside in the development of new materials suitable for 3D printing, which may open the door to new applications. Fused deposition modeling (FDM) is the most commonly used 3D printing technique. However, filaments suitable for FDM must meet certain criteria for a successful printing process and thus the optimization of their properties in often necessary. The aim of this work was to prepare a flexible and printable polyurethane filament parting from a biocompatible waterborne polyurethane, which shows potential for biomedical applications. In order to improve filament properties and printability, cellulose nanofibers and graphene were employed to prepare polyurethane based nanocomposites. Prepared nanocomposite filaments showed altered properties which directly impacted their printability. Graphene containing nanocomposites presented sound enough thermal and mechanical properties for a good printing process. Moreover, these filaments were employed in FDM to obtained 3D printed parts, which showed good shape fidelity. Properties exhibited by polyurethane and graphene filaments show potential to be used in biomedical applications.

Cellulose nanocrystal mediated fast self-healing and shape memory conductive hydrogel for wearable strain sensors

Electro-conductive hydrogel (ECH) with self-healing, shape memory and biocompatible properties is highly urgent for wearable strain sensors to prolonging their lifespan, endowing programmable shape control property, and improving affinity to skin during service. However, most of synthetic polymer-based ECH usually involve potential toxicity, long healing and shape drive time. Herein, a fast healable and shape memory ECH with excellent biocompatibility is reported for the first time by incorporating cellulose nanocrystals grafted phenylboronic acid (CNCs-ABA) and multiwalled carbon nanotubes (MWCNTs) into polyvinyl alcohol (PVA). CNCs-ABA is designed as dispersant and crosslinker in hydrogel. pH-induced dynamic borate bonds give hydrogel excellent shape recovery and fixity ratio of 82.1% and 78.2%, respectively. Meanwhile, 97.1% healing efficiency is obtained within 2 min depending on remarkable photothermal effect of MWCNTs and reversible microcrystallization. Double crosslinking networks endow excellent mechanical properties to hydrogel, whose tensile strength, strain and elastic modulus reach 227.0 kPa, 395.0% and 9.0 kPa, respectively. Furthermore, the synergistic effect of MWCNTs and NaOH enhance the conductivity of hydrogel with value of 3.8×10^-2 S/m. In addition, the hydrogel can act as strain sensor for detecting human motion with superior biocompatibility and fast resistance response to applied strain, which is suitable for human health management.

Anti-pathogenic activity of graphene nanomaterials: A review

Graphene and its derivatives are promising candidates for a variety of biological applications, among which, their anti-pathogenic properties are highly attractive due to the outstanding physicochemical characteristics of these novel nanomaterials. The antibacterial, antiviral and antifungal performances of graphene are increasingly becoming more important due to the pathogen's resistance to existing drugs. Despite this, the factors influencing the antibacterial activity of graphene nanomaterials, and consequently, the mechanisms involved are still controversial. This review aims to systematically summarize the literature, discussing various factors that affect the antibacterial performance of graphene materials, including the shape, size, functional group and the electrical conductivity of graphene flakes, as well as the concentration, contact time and the pH value of the graphene suspensions used in related microbial tests. We discuss the possible surface and edge interactions between bacterial cells and graphene nanomaterials, which cause antibacterial effects such as membrane/oxidative/photothermal stresses, charge transfer, entrapment and self-killing phenomena. This article reviews the anti-pathogenic activity of graphene nanomaterials, comprising their antibacterial, antiviral, antifungal and biofilm-forming performance, with an emphasis on the antibacterial mechanisms involved.

Tailoring the in situ conformation of bacterial cellulose-graphene oxide spherical nanocarriers

Bacterial cellulose (BC)/graphene oxide (GO) sphere-like hydrogels have been biosynthesized by in situ route in dynamic cultivation. The GO concentration during BC biosynthesis (0.01 and 0.05 mg mL^-1) was the determining factor for the conformation of the final hydrogels: encapsulation (BC/GO 0.01) or distribution through all the body of the spheres (BC/GO 0.05). The as-prepared sphere hydrogels were characterized in terms of physico-chemical properties, thermal stability, microstructure, and swelling capacity in different media. In addition, a chemical treatment with ascorbic acid was performed in order to obtain reduced graphene oxide (rGO) into the spheres (BC/rGO). After the chemical treatment, electrostatic force microscopy (EFM) revealed electrical interactions due to the presence of rGO inside the spheres and resistivity values in the range of semiconductive materials were obtained (10⁶ Ω·cm), making BC/rGO spheres promising for the development of electro-stimulated systems. The in vitro release study of ibuprofen (IB), showed that the reduction process led to an increase of 73 and 92% of drug release with respect to BC/GO 0.05 and BC/GO 0.01 spheres, respectively. Moreover, the encapsulation conformation showed more homogeneous porous structure and thus, a cumulative drug release of 63% was reached after 6 h.

Potential of carbohydrate-conjugated graphene assemblies in biomedical applications

Graphene displays various properties like optical, electrical, mechanical, etc. resulting in a large range of applications in biosensing, bio-imaging, medical and electronic devices. The graphene-based nanomaterials show disadvantages like hydrophobic surface, degradation of biomolecules (proteins and amino acids) and toxicity to the human and microbes by permeating into the cells and thus, limiting the use in the biomedical field. Conjugation of carbohydrates like chitin, cyclodextrins and cellulose with graphene results in thermal stability, oxygen repulsive ability, fire-retardant and gelling properties with better biodegradability, biocompatibility and safety leading to the formation of environment-friendly biopolymers. This article delivers an overview of the molecular interaction of different carbohydrates-derived from natural sources like marine, plants and microbes with graphene nanosheets to extend the applications in tissue engineering, surgical materials, biosensing and novel drug delivery for prolonged action in the treatment of breast and hepatic cancers.

Processing and modification of hydrogel and its application in emerging contaminant adsorption and in catalyst immobilization: a review

Due to the wonderful property of hydrogels, they can provide a platform for a wide range of applications. Recently, there is a growing research interest in the development of potential hydrogel adsorbents in wastewater treatment due to their adsorption ability toward aqueous pollutants. It is important to prepare such a hydrogel that possesses appropriate robustness, adsorption capacity, and adsorption efficiency to meet the need of water treatment. In order to improve the property of hydrogels, much effort has been made by researchers to modify hydrogels, among which incorporating inorganic components into the polymeric networks is the most common method, which can reduce the product cost and simplify the preparation procedure. Not only can hydrogel be applied as adsorbent, but it also can be used as matrix for catalyst immobilization. In this review, the key advancement on the preparation and modification of hydrogels is discussed, with special emphasis on the introduction of inorganic materials into polymeric networks and consequential changes in the properties of mechanical strength, swelling, and adsorption. Besides, hydrogels used as adsorbents for removal of dyes and inorganic pollutants have been widely explored, but their use for adsorbing emerging contaminants from aqueous solution has not received much attention. Thus, this review is mainly focused on hydrogels' application in removing emerging contaminants by adsorption. Furthermore, hydrogels can be also applied in immobilizing catalysts, such as enzyme and photocatalyst, to remove pollutants completely and avoid secondary pollution, so their progress as catalyst matrix is overviewed.

Renewable Responsive Systems Based on Original Click and Polyurethane Cross-Linked Architectures with Advanced Properties

A new chemical architecture from oleic acid, consisting of a diol structure containing pendant furan rings, denoted the furan oligomer (FO) was synthesized and fully characterized. The FO was integrated into a linear rapeseed-based polyurethane (PU) backbone and cross-linked through a Diels-Alder (DA) reaction by using pendant furan rings and a short polypropylene oxide-based bismaleimide. This is the first time that a thermoreversible PU network based on vegetable oil has been reported. The effects of varying proportions of FO in linear and cross-linked systems, by DA, were studied. These materials were analyzed by classic characterization techniques. The stability and recyclability of the cross-linked materials were shown by successive reprocessing cycles and reanalyzing the mechanical properties. Self-healing properties were macroscopically exhibited and investigated by tensile tests on healed materials. The resulting cross-linked materials present a large range of properties, such as tunable mechanical and thermoresponsive behavior, good thermal recyclability, and self-healing abilities.

The role of cellulose nanocrystals in biocompatible starch-based clicked nanocomposite hydrogels

Starch-based nanocomposite hydrogels were successfully prepared by the Diels-Alder click cross-linking reaction between furan-functionalized starch derivative and a water-soluble tetrafunctional maleimide compound, adding cellulose nanocrystals (CNC) as nanoreinforcement. The effect of increasing the CNC content on rheological and swelling properties as well as on the morphology of the hydrogels was analyzed. Besides, in order to evaluate the applicability of the as-prepared hydrogels as delivery systems, drug release measurements and in vitro cytotoxicity assays were also performed. It was found that the prepared nanocomposite hydrogels presented higher stiffness as the CNC content increased. The incorporation of the nanocrystals modified the internal porous microstructure of the hydrogels, affecting consequently both the swelling capacity and the drug-delivery kinetics. Moreover, the prepared nanocomposite hydrogels showed non-toxic behavior, demonstrating their potential applicability in the biomedical field, especially as sustained drug delivery systems.

Hybrid material for open abdomen: saving the wound from intestinal fistula

Treatment of an open abdomen (OA) wound combined with an intestinal fistula is a challenge in the clinic. Here, inspired by the antibacterial activity of graphene (G) and its derivatives, we present a hybrid patch based on the ability of graphene and polycaprolactone (PCL) to kill bacteria and save the cells in a wound. Benefiting from the antibacterial ability of graphene oxide (GO), cells could survive in the presence of bacteria. With the increased ability to protect cells, this patch accelerated wound healing in an OA and intestinal fistula wound model. Additionally, the sub-acute toxicity score showed no extra damage to organs. In conclusion, the employment of the hybrid material for an OA and an intestinal fistula wound healing is encouraging. A hybrid patch based on graphene oxide and polycaprolactone electrospun was generated for open abdomen and fistula wound. The application of the hybrid patch could save the cells from bacteria which contribute to accelerating wound healing.

Bio-Based Polymers with Antimicrobial Properties towards Sustainable Development

This article concisely reviews the most recent contributions to the development of sustainable bio-based polymers with antimicrobial properties. This is because some of the main problems that humanity faces, nowadays and in the future, are climate change and bacterial multi-resistance. Therefore, scientists are trying to provide solutions to these problems. In an attempt to organize these antimicrobial sustainable materials, we have classified them into the main families; i.e., polysaccharides, proteins/polypeptides, polyesters, and polyurethanes. The review then summarizes the most recent antimicrobial aspects of these sustainable materials with antimicrobial performance considering their main potential applications in the biomedical field and in the food industry. Furthermore, their use in other fields, such as water purification and coating technology, is also described. Finally, some concluding remarks will point out the promise of this theme.