Characterization of CuO-bacterial cellulose nanohybrids fabricated by in-situ and ex-situ impregnation methods

A new design of colorimetric films using bacterial cellulose nanocrystals derived from nata de coco for sensing volatile organic compounds

In this work, bacterial cellulose (BC) derived from Nata de Coco is a polysaccharide material, and it is further processed into bacterial cellulose nanocrystal (BCNC) via acid hydrolysis. Then BCNC is doped with transition metals to enhance its amine/hydrogen sulfide response. Therefore, the aim of this study is to investigate the use of transition metals as indicators to detect amine and hydrogen sulfide gas for efficiently monitoring food spoilage. BCNCs were treated with various concentrations of silver nitrate (AgNO3) and copper sulfate pentahydrate (CuSO4·5H2O). Then the dropwise addition of ascorbic acid was applied to reduce Ag+ and Cu2+ to Ag0 (silver nanoparticle) and Cu0 (copper nanoparticle), which refer to red brown and red wine colors, respectively. The results indicated that BCNC/Ag nanoparticles were spherical, while BCNC/Cu nanoparticles exhibited a rod-like structure. XRD results also presented the incorporation of Ag and Cu nanoparticles, as confirmed by both crystallography structures. Furthermore, UV-Vis spectra showed the adsorption bands at 422-430 nm and 626-629 nm, belonging to Ag and Cu nanoparticles. After H2S and ammonia gas exposure, BH/Ag and BH/Cu films turned black from brown and red. In conclusion, transition metal-doped BCNCs exhibit potential for innovative food spoilage gas sensors.

An antibacterial membrane based on Janus bacterial cellulose with nano-sized copper oxide through polydopamine conjugation for infectious wound healing

Bacterial cellulose (BC) produced by Acetobacter xylinum has great advantages in wound dressing. However, the structural limitation under static culture, and lack of antibacterial properties restrict its application, especially for infectious wound healing. The present study reported an original wound dressing, which was composed of a Janus BC membrane with antibacterial nano-sized copper oxide (CuO) through polydopamine (PDA) conjugation to promote wound healing under infectious condition. The finished product (CuO/PDA/BC membrane) exhibited favorable air permeability, high hydrophilicity and good mechanical properties, as well as strong antibacterial effects by the sustained release of CuO and photothermal effect of CuO/PDA. Furthermore, CuO/PDA/BC membrane inhibited inflammatory response and promoted wound healing in an infectious wound model in vivo. These results suggested that our CuO/PDA/BC membrane had great potential as wound dressing for infectious wound healing.

Stabilization and strengthening effects of filamentous nanocellulose in the foam forming of quartz paper

Compared with traditional papermaking, foam forming is a new papermaking technology that uses foam instead of water to disperse fibres, which can effectively solve the problem of poor evenness of ceramic paper, but the instability of foam itself affects the application of foam forming technology. Herein, a highly stable foaming agent for foam forming technology was prepared via physical reaction of lauryl dimethyl amine oxide (OB-2) with filamentous nanocellulose (cellulose nanofiber (CNF-C) and bacterial cellulose (BC)). Then, the quartz paper was prepared by foam forming technology. Firstly, hydrogen bond interactions between hydroxyl groups of the filamentous nanocellulose and hydrophilic moieties on OB-2 enabled the formation of a 3D nanonetwork layer on the surface of the bubble, which extended the half-life of the bubble and effectively prevented the bubble from bursting or coalescing. Then, the foam was extruded and cracked, and the filamentous nanocellulose was retained on the quartz fibres to prepare filamentous nanocellulose/quartz fibre paper by foam forming technology. The quartz paper exhibited excellent evenness and mechanical properties. In conclusion, the research of foam forming technology is of great significance to the application and development of special paper.

Functionalization of bacterial cellulose: Exploring diverse applications and biomedical innovations: A review

The demand for the functionalization of additive materials based on bacterial cellulose (BC) is currently high due to their potential applications across various sectors. The preparation of BC-based additive materials typically involves two approaches: in situ and ex situ. In situ modifications entail the incorporation of additive materials, such as soluble and dispersed substances, which are non-toxic and not essential for bacterial cell growth during the production process. However, these materials can impact the yield and self-assembly of BC. In contrast, ex situ modification occurs subsequent to the formation of BC, where the additive materials are not only adsorbed on the surface but also impregnated into the BC pellicle, while the BC slurry was homogenized with other additive materials and gelling agents to create composite films using the casting method. This review will primarily focus on the in situ and ex situ functionalization of BC then sheds light on the pivotal role of functionalized BC in advancing biomedical technologies, wound healing, tissue engineering, drug delivery, bone regeneration, and biosensors.

Carbon dots embedded bacterial cellulose membrane as active packaging: Toxicity, in vitro release and application in minced beef packaging

Antimicrobial bacterial cellulose (BC) membranes incorporated with carbon dots (CDs) were developed to improve the shelf life and ensure the safety of minced beef during 9 days of storage at 4 °C. An ex-situ method was used to develop BC-CDs with different CDs loading capacities (16.50, 22.50, and 38.50 mg/cm3). Only BC-CDs38.50 membrane exhibited toxicity in human embryonic kidney cells, and BC-CDs membranes had the slowest release rate of CDs in 95% ethanol. Significant differences were noted in the chemical and sensory attributes of samples packaged with BC-CDs16.50 and BC-CDs22.50, compared to the control. The microbial counts in samples with BC-CDs were significantly lower than those in samples with pristine BC membranes or the control. Notably, the BC-CDs22.50 membrane exhibited a substantial reduction (4.7 log10 CFU/g) in Escherichia coli counts by the end of storage. These findings highlight the potential of BC-CDs membranes as effective antimicrobial materials in meat packaging.

Production of bacterial cellulose (BC)/nisin composite with enhanced antibacterial and mechanical properties through co-cultivation of Komagataeibacter xylinum and Lactococcus lactis subsp. lactis

By employing co-cultivation technique on Komagataeibacter xylinum and Lactococcus lactis subsp. lactis, bacterial cellulose (BC)/nisin films with improved antibacterial activity and mechanical properties were successfully produced. The findings demonstrated that increased nisin production is associated with an upregulation of gene expression. Furthermore, results from Scanning electronic microscopy (SEM), Fourier transform infrared (FTIR), X-ray diffraction (XRD), and Thermogravimetric analysis (TG) confirmed the integration of nisin within BC. While being biocompatible with human cells, the BC/nisin composites exhibited antimicrobial activity. Moreover, mechanical property analyses showed a noticeable improvement in Young's modulus, tensile strength, and elongation at break by 161, 271, and 195 %, respectively. Additionally, the nisin content in fermentation broth was improved by 170 % after co-culture, accompanied by an 8 % increase in pH as well as 10 % decrease in lactate concentration. Real-time reverse transcription PCR analysis revealed an upregulation of 11 nisin-related genes after co-cultivation, with the highest increase in nisA (5.76-fold). To our knowledge, this is the first study which demonstrates that an increase in secondary metabolites after co-culturing is modulated by gene expression. This research offers a cost-effective approach for BC composite production and presents a technique to enhance metabolite concentration through the regulation of relevant genes.

Modification of microstructure and selected physicochemical properties of bacterial cellulose produced by bacterial isolate using hydrocolloid-fortified Hestrin-Schramm medium

Bacterial cellulose (BC) is a biopolymer with applications in numerous industries such as food and pharmaceutical sectors. In this study, various hydrocolloids including modified starches (oxidized starch-1404 and hydroxypropyl starch-1440), locust bean gum, xanthan gum (XG), guar gum, and carboxymethyl cellulose were added to the Hestrin-Schramm medium to improve the production performance and microstructure of BC by Gluconacetobacter entanii isolated from coconut water. After 14-day fermentation, medium supplemented with 0.1% carboxymethyl cellulose and 0.1% XG resulted in the highest BC yield with dry BC content of 9.82 and 6.06 g/L, respectively. In addition, scanning electron microscopy showed that all modified films have the characteristic three-dimensional network of cellulose nanofibers with dense structure and low porosity as well as larger fiber size compared to control. X-ray diffraction indicated that BC fortified with carboxymethyl cellulose exhibited lower crystallinity while Fourier infrared spectroscopy showed characteristic peaks of both control and modified BC films.

Fabrication of bacterial cellulose composites with antimicrobial properties by in situ modification utilizing the specific function-suspension containing water-insoluble magnolol

In situ modification is commonly employed for Bacterial cellulose (BC) functionalization. However, water-insoluble modifiers are usually deposited at the bottom of the medium, therefore cannot be used for in situ modification of BC. Herein, a novel strategy for in situ modification of insoluble modifiers after suspension by a suspending agent was proposed. The BC-producing strain Kosakonia oryzendophytica FY-07, not Gluconacetobacter xylinus, was selected to prepare BC products with antibacterial activity because of its tolerance to natural antibacterial products. The experimental results showed that xanthan gum as a suspending agent can uniformly and stably disperse water-insoluble plant extracts magnolol in the culture medium to prepare the in situ modified BC products. Characterization of the properties showed that the in situ modified BC products have reduced crystallinity, significantly increased swelling ratio and strong inhibition on Gram-positive bacteria and fungi and weak inhibition on Gram-negative bacteria. Furthermore, the in situ modified BC products had no toxicity to cells. This study provided a feasible strategy for in situ modification of BC using water-insoluble modifiers to extend BC functionality and has significant implications for the biopolymer industry.

Review of Bacterial Nanocellulose-Based Electrochemical Biosensors: Functionalization, Challenges, and Future Perspectives

Electrochemical biosensing devices are known for their simple operational procedures, low fabrication cost, and suitable real-time detection. Despite these advantages, they have shown some limitations in the immobilization of biochemicals. The development of alternative materials to overcome these drawbacks has attracted significant attention. Nanocellulose-based materials have revealed valuable features due to their capacity for the immobilization of biomolecules, structural flexibility, and biocompatibility. Bacterial nanocellulose (BNC) has gained a promising role as an alternative to antifouling surfaces. To widen its applicability as a biosensing device, BNC may form part of the supports for the immobilization of specific materials. The possibilities of modification methods and in situ and ex situ functionalization enable new BNC properties. With the new insights into nanoscale studies, we expect that many biosensors currently based on plastic, glass, or paper platforms will rely on renewable platforms, especially BNC ones. Moreover, substrates based on BNC seem to have paved the way for the development of sensing platforms with minimally invasive approaches, such as wearable devices, due to their mechanical flexibility and biocompatibility.

Exploitation of cantaloupe peels for bacterial cellulose production and functionalization with green synthesized Copper oxide nanoparticles for diverse biological applications

The promising features of most bacterial celluloses (BC) promote the continuous mining for a cost-effective production approach toward wide and sustainable applications. Herein, cantaloupe peels (CP) were successfully implemented for sustainable BC production. Results indicated that the enzymatically hydrolyzed CP supported the maximum BC production of approximately 3.49 g/L when used as a sole fermentation media. The produced BC was fabricated with polyvinyl alcohol (PVA) and chitosan (Ch), and loaded with green synthesized copper oxide nanoparticles (CuO-NPs) to improve its biological activity. The novel composite showed an antimicrobial activity against several human pathogens such as Staphylococcus aureus, Streptococcus mutans, Salmonella typhimurium, Escherichia coli, and Pseudomonas fluorescens. Furthermore, the new composite revealed a significant in vitro anticancer activity against colon (Caco-2), hepatocellular (HepG-2), and breast (MDA) cancer cells, with low IC₅₀ of 0.48, 0.27, and 0.33 mg/mL for the three cell lines, respectively. On the other hand, the new composite was remarkably safe for human skin fibroblast (HSF) with IC₅₀ of 1.08 mg/mL. Interestingly, the composite membranes exhibited lethal effects against all stages of larval instar and pupal stage compared with the control. In this study, we first report the diverse potential applications of BC/PVA/Ch/CuO-NPs composites based on green synthesized CuO-NPs and sustainably produced BC membrane.

Cellulose Structures as a Support or Template for Inorganic Nanostructures and Their Assemblies

Cellulose is the most abundant natural polymer and deserves the special attention of the scientific community because it represents a sustainable source of carbon and plays an important role as a sustainable energent for replacing crude oil, coal, and natural gas in the future. Intense research and studies over the past few decades on cellulose structures have mainly focused on cellulose as a biomass for exploitation as an alternative energent or as a reinforcing material in polymer matrices. However, studies on cellulose structures have revealed more diverse potential applications by exploiting the functionalities of cellulose such as biomedical materials, biomimetic optical materials, bio-inspired mechanically adaptive materials, selective nanostructured membranes, and as a growth template for inorganic nanostructures. This article comprehensively reviews the potential of cellulose structures as a support, biotemplate, and growing vector in the formation of various complex hybrid hierarchical inorganic nanostructures with a wide scope of applications. We focus on the preparation of inorganic nanostructures by exploiting the unique properties and performances of cellulose structures. The advantages, physicochemical properties, and chemical modifications of the cellulose structures are comparatively discussed from the aspect of materials development and processing. Finally, the perspective and potential applications of cellulose-based bioinspired hierarchical functional nanomaterials in the future are outlined.

Fabrication strategies and biomedical applications of three-dimensional bacterial cellulose-based scaffolds: A review

Bacterial cellulose (BC), an extracellular polysaccharide, is a versatile biopolymer due to its intrinsic physicochemical properties, broad-spectrum applications, and remarkable achievements in different fields, especially in the biomedical field. Presently, the focus of BC-related research is on the development of scaffolds containing other materials for in-vitro and in-vivo biomedical applications. To this end, prime research objectives concern the biocompatibility of BC and the development of three-dimensional (3D) BC-based scaffolds. This review summarizes the techniques used to develop 3D BC scaffolds and discusses their potential merits and limitations. In addition, we discuss the various biomedical applications of BC-based scaffolds for which the 3D BC matrix confers desired structural and conformational features. Overall, this review provides comprehensive coverage of the idea, requirements, synthetic strategies, and current and prospective applications of 3D BC scaffolds, and thus, should be useful for researchers working with polysaccharides, biopolymers, or composite materials.

A Comprehensive Review of the Development of Carbohydrate Macromolecules and Copper Oxide Nanocomposite Films in Food Nanopackaging

Background. Food nanopackaging helps maintain food quality against physical, chemical, and storage instability factors. Copper oxide nanoparticles (CuONPs) can improve biopolymers’ mechanical features and barrier properties. This will lead to antimicrobial and antioxidant activities in food packaging to extend the shelf life. Scope and Approach. Edible coatings based on carbohydrate biopolymers have improved the quality of packaging. Several studies have addressed the role of carbohydrate biopolymers and incorporated nanoparticles to enhance food packets’ quality as active nanopackaging. Combined with nanoparticles, these biopolymers create film coatings with an excellent barrier property against transmissions of gases such as O2 and CO2. Key Findings and Conclusions. This review describes the CuO-biopolymer composites, including chitosan, agar, cellulose, carboxymethylcellulose, cellulose nanowhiskers, carrageenan, alginate, starch, and polylactic acid, as food packaging films. Here, we reviewed different fabrication techniques of CuO biocomposites and the impact of CuONPs on the physical, mechanical, barrier, thermal stability, antioxidant, and antimicrobial properties of carbohydrate-based films.

In situ grown bacterial cellulose/MoS2 composites for multi-contaminant wastewater treatment and bacteria inactivation

For the purpose of developing multifunctional water purification materials capable of degrading organic pollutants while simultaneously inactivating microorganisms from contaminated wastewater streams, we report here a facile and eco-friendly method to immobilize molybdenum disulfide into bacterial cellulose via a one-step in-situ biosynthetic method. The resultant nanocomposite, termed BC/MoS₂, was shown to possess a photocatalytic activity capable of generating •OH from H₂O₂, while also exhibiting photodynamic/photothermal mechanisms, the combination of which exhibits synergistic activity for the degradation of pollutants as well as for bacterial inactivation. In the presence of H₂O₂, the BC/MoS₂ nanocomposite exhibited excellent antibacterial efficacy upwards of 99.9999% (6 log units) for the photoinactivation of both Gram-negative Escherichia coli and Gram-positive Staphylococcus aureus upon infrared (IR) lamp illumination (100 W, 760 nm ≤ λ ≤ 5000 nm, 15 cm vertical distance; 5 min). Mechanistic studies revealed synergistic pathogen inactivation resulting from the combination of photocatalytically generated •OH and hyperthermia induced by the photothermal conversion of the near-IR light. In addition, the BC/MoS₂ nanocomposite also showed excellent photodegradation activity for common aqueous contaminants in the presence of H₂O₂, including malachite green (a textile dye), catechol violet (a phenol) and formaldehyde. Taken together, our findings demonstrate that sustainable materials such as BC/MoS₂ have potential applications in wastewater treatment and microorganism disinfection.

Low-cost and highly efficient production of bacterial cellulose from sweet potato residues: Optimization, characterization, and application

Bacterial cellulose (BC) is an emerging biological material with unique properties and structure, which has attracted more and more attention. In this study, Gluconacetobacter xylinus was used to convert sweet potato residues (SPR) hydrolysate to BC. SPR was directly used without pretreatment, and almost no inhibitors were generated, which was beneficial to subsequent glucan conversion and SPR-BC synthesis. SPR-BC production was 11.35 g/L under the optimized condition. The comprehensive structural characterization and mechanical analysis demonstrated that the crystallinity, maximum thermal degradation temperature, and tensile strength of SPR-BC were 87.39%, 263 °C, and 6.87 MPa, respectively, which were superior to those of BC produced with the synthetic medium. SPR-BC was added to rice straw pulp to enhance the bonding force between fibers and the indices of tensile, burst, and tear of rice straw paper. The indices were increased by 83.18%, 301.27%, and 169.58%, respectively. This research not only expanded the carbon source of BC synthesis, reduced BC production cost, but also improved the quality of rice straw paper.

Chitosan-based nanocomposite films incorporated with NiO nanoparticles: Physicochemical, photocatalytic and antimicrobial properties

The aim of this research was to fabricate active nanocomposite films by incorporation of nickel oxide nanoparticles (NiONPs) (3, 6 and 9% w/w) into the chitosan-based films. The NiONPs were synthesized by solution combustion method and the films were prepared by solvent casting method. The formation of new interactions and increasing of films' crystallinity were confirmed by FT-IR and XRD analyses. Uniform dispersion of NiONPs at lower concentrations and their aggregation at level of 9% was confirmed by FE-SEM observations. Water barrier properties, tensile strength, thermal properties and surface hydrophobicity of films enhanced by addition of 6% NiONPs. Photocatalytic activity of nanocomposites was confirmed by absorption of 72% of methyl orange during 270 min under UV irradiation. The nanocomposite films exhibited good antibacterial activity against gram-positive (S. aureus) and gram-negative (S. typhimurium) bacteria. Therefore, the chitosan-NiONPs nanocomposite films could be used for active food packaging applications and photodecolorization purposes.

Bionanocellulose/Poly(Vinyl Alcohol) Composites Produced by In-Situ Method and Ex-Situ/Impregnation or Sterilization Methods

The purpose of the work was to obtain composites based on bionanocellulose (BNC) and poly(vinyl alcohol) (PVA) for specific biomedical and cosmetic applications and to determine how the method and conditions of their preparation affect their utility properties. Three different ways of manufacturing these composites (in-situ method and ex-situ methods combined with sterilization or impregnation) were presented. The structure and morphology of BNC/PVA composites were studied by ATR-FTIR spectroscopy and scanning microscopy (SEM, AFM). Surface properties were tested by contact angle measurements. The degree of crystallinity of the BNC fibrils was determined by means of the XRD method. The mechanical properties of the BNC/PVA films were examined using tensile tests and via the determination of their bursting strength. The water uptake of the obtained materials was determined through the gravimetric method. The results showed that PVA added to the nutrient medium caused an increase in biosynthesis yield. Moreover, an increase in base weight was observed in composites of all types due to the presence of PVA. The ex-situ composites revealed excellent water absorption capacity. The in-situ composites appeared to be the most durable and elastic materials.

Enhanced radiotherapy efficacy of breast cancer multi cellular tumor spheroids through in-situ fabricated chitosan-zinc oxide bio-nanocomposites as radio-sensitizing agents

Overwhelming evidence has shown that three-dimensional multicellular tumor spheroids (MCTSs) as a mimic of in-vivo tumor can accurately exhibit cellular responses to treatments. So, we compared the capability of pure zinc oxide nanoparticles (ZnO-NPs) and chitosan-ZnO bio-nanocomposites (CS-ZnO BNCs) for enhancing the radiosensitization of MDA-MB-231 breast cancer cells (BCCs) in the 3D-MCTSs model. ZnO-NPs and CS-ZnO BNCs were synthesized by a facile co-precipitation method. FE-SEM images revealed that the uniform spherical ZnO-NPs with an average diameter of 35 nm were successfully dispersed on chitosan. MDA-MB-231 MCTSs which were formed in a non-adherent culture plate, possessed functional features of in-vivo tumor. The priority of such culture method to conventionally used 2D monolayer (or parental) cell culture is the mimicking of tumor microenvironment. The toxicity of CS-ZnO BNCs and ZnO-NPs against the MDA-M-231 BCCs was evaluated using MTT-colorimetric assay, which demonstrated superior biocompatibility of CS-ZnO BNCs compared to pure ZnO-NPs (even at high concentration of 100 μg/mL). Survival fraction analysis of cells under clinical X-ray irradiation (6 MV) showed that MCTSs had a higher radioresistance compared to parental cells. Besides, the clonogenic potential of irradiated MCTSs was significantly decreased by the addition of CS-ZnO BNCs similar to that of monolayer cells. The sensitivity enhancement ratios (SER) for MCTSs and monolayer cells were calculated 1.5 and 1.63, respectively. Further, tracking of radiobiological properties and apoptosis induction of MCTSs showed that CS-ZnO BNCs not only could lead to the creation of higher radiation-induced complex DNA break and apoptosis death in MCTSs, but also weakened DNA repair mechanisms. It was found that non-toxic concentration of CS-ZnO BNCs has promising potential to enhance radiosensitivity of resistant-MCTSs as a superior in-vitro tumor model. So, CS-ZnO BNCs can be a prominent candidate for overcoming the resistance of BCCs to radiotherapy.

Versatile nanocellulose-based nanohybrids: A promising-new class for active packaging applications

The food packaging industry is rapidly growing as a consequence of the development of nanotechnology and changing consumers' preferences for food quality and safety. In today's globalization of markets, active packaging has achieved many advantages with the capability to absorb or release substances for prolonging the food shelf life over the traditional one. Therefore, it is critical to developing multifunctional active packaging materials from biodegradable polymers with active agents to decrease environmental challenges. This review article addresses the recent advances in nanocelluloses (NCs)- baseds nanohybrids with new function features in packaging, focusing on the various synthesis methods of NCs-based nanohybrids, and their reinforcing effects as active agents on food packaging properties. The applications of NCs-based nanohybrids as antioxidants, antimicrobial agents, and UV blocker absorbers for prolonging food shelf-life are also reviewed. Overall, these advantages make the CNs-based nanohybrids with versatile properties promising in food and packaging industries, which will impact more readership with concern for future research.

In Vitro Efficacy of Bacterial Cellulose Dressings Chemisorbed with Antiseptics against Biofilm Formed by Pathogens Isolated from Chronic Wounds

Local administration of antiseptics is required to prevent and fight against biofilm-based infections of chronic wounds. One of the methods used for delivering antiseptics to infected wounds is the application of dressings chemisorbed with antimicrobials. Dressings made of bacterial cellulose (BC) display several features, making them suitable for such a purpose. This work aimed to compare the activity of commonly used antiseptic molecules: octenidine, polyhexanide, povidone-iodine, chlorhexidine, ethacridine lactate, and hypochlorous solutions and to evaluate their usefulness as active substances of BC dressings against 48 bacterial strains (8 species) and 6 yeast strains (1 species). A silver dressing was applied as a control material of proven antimicrobial activity. The methodology applied included the assessment of minimal inhibitory concentrations (MIC) and minimal biofilm eradication concentration (MBEC), the modified disc-diffusion method, and the modified antibiofilm dressing activity measurement (A.D.A.M.) method. While in 96-well plate-based methods (MIC and MBEC assessment), the highest antimicrobial activity was recorded for chlorhexidine, in the modified disc-diffusion method and in the modified A.D.A.M test, povidone-iodine performed the best. In an in vitro setting simulating chronic wound conditions, BC dressings chemisorbed with polyhexanide, octenidine, or povidone-iodine displayed a similar or even higher antibiofilm activity than the control dressing containing silver molecules. If translated into clinical conditions, the obtained results suggest high applicability of BC dressings chemisorbed with antiseptics to eradicate biofilm from chronic wounds.

Photocatalytic activity and water purification performance of in situ and ex situ synthesized bacterial cellulose-CuO nanohybrids

The aim of this research was synthesizing of bacterial cellulose (BC) nanohybrids by incorporation of CuO-NPs and evaluation of their ability in the removing of microbial, heavy metals, and dyes pollutants from water. CuO-BC nanohybrids were synthesized by two in situ (sonochemical and precipitation) methods and compared with ex situ synthesized nanohybrid. FE-SEM images revealed that the growth of CuO-NPs in the sonochemically synthesized in situ substrate is better. The ex situ nanohybrid had the highest loading capacity (27.17 μg/cm² ) but the migration of CuO-NPs from this substrate was higher than in situ ones. According to antimicrobial tests, 80% and 90% of initial population of E. coli and S. aureus, respectively, were removed after 6 hr contact of substrates with water. The potential of the substrates in the adsorption of lead and arsenic was about 60% after 24 hr. About 75% of methylene blue and methyl orange dyes were adsorbed into substrates after 6 hr. CuO doped substrates had the photocatalytic activity and caused to decrease the oxygen content about 4%-7% during 6 hr. In general, the reusability of ex situ synthesized substrate was lower than in situ nanohybrids. Sonochemically synthesized substrate was suggested as the best nanohybrid for water purification applications in terms of morphological properties and reusability. PRACTITIONER POINTS: CuO-BC nanohybrids were prepared by in-situ and ex-situ methods. Well distribution of NPs and slower release was achieved by in-situ methods. Antimicrobial and photocatalytic activity of ex-situ nanohybrid was higher than in-situ ones. Dyes and heavy metals were removed successfully with nanohybrid substrates. Sonochemical in-situ nanohybrid exhibited the best water purification performance.

Bacterial cellulose: From production optimization to new applications

Bacterial cellulose (BC) is a biopolymer of great significance to the medical, pharmaceutical, and food industries. However, a high concentration of carbon sources (mainly glucose) and other culture media components is usually required to promote a significant yield of BC, which increases the bioprocess cost. Thus, optimization strategies (conventional or statistical) have become relevant for the cost-effective production of bacterial cellulose. Additionally, this biopolymer may present new properties through modifications with exogenous compounds. The present review, explores and discusses recent studies (last five years) that report the optimization of BC production and its yield as well as in situ and ex situ modifications, resulting in improved mechanical, antioxidant, and antimicrobial properties of BC for new applications.

Semiconductor-to-conductor transition in 2D copper(ii) oxide nanosheets through surface sulfur-functionalization

Functionalization is a widely-used strategy to modulate and optimize the properties of materials towards various applications, including sensing, catalysis, and energy generation. While the influence of sulfur-functionalization of carbon materials and oxides like ZnO and TiO₂ has been studied, far less research has been devoted to analyzing sulfur-functionalization of CuO and other transition metal oxide nanomaterials. Here, we report sulfur-functionalization of copper(ii) oxide nanosheets synthesized by using a soft-templating procedure, with sulfur-addition based on hydrogen sulfide gas as a source. The resulting sulfur-functionalization does not change the overall crystal structure and morphology of the CuO nanosheets, but leads to a decrease in surface hydroxyl groups. Sulfur induces a semiconductor-to-conductor state transition of the CuO nanosheets, which is supported by computational modeling. The metallic transition results from shifting of the Fermi level into the valence band due to formation of Cu-S bonds on the surface of the CuO nanosheets.

Methods and applications of nanocellulose loaded with inorganic nanomaterials: A review

Nanocellulose obtained from natural renewable resources has attracted enormous interests owing to its unique morphological characteristics, excellent mechanical strength, biocompatibility and biodegradability for a variety of applications in many fields. The template structure, high specific surface area, and active surface groups make it feasible to conduct surface modification and accommodate various nano-structured materials via physical or chemical deposition. The review presented herein focuses on the methodologies of loading different nano-structured materials on nanocellulose, including metals, nanocarbons, oxides, mineral salt, quantum dots and nonmetallic elements; and further describes the applications of nanocellulose composites in the fields of catalysis, optical electronic devices, biomedicine, sensors, composite reinforcement, photoswitching, flame retardancy, and oil/water separation.