Cu-metal-organic framework supported on chitosan for efficient condensation of aromatic aldehydes and malononitrile

Deploying solid-phase synthesis to access thymine-containing nucleoside analogs that inhibit DNA repair nuclease SNM1A

Nucleoside analogs show useful bioactive properties. A versatile solid-phase synthesis that readily enables the diversification of thymine-containing nucleoside analogs is presented. The utility of the approach is demonstrated with the preparation of a library of compounds for analysis with SNM1A, a DNA damage repair enzyme that contributes to cytotoxicity. This exploration provided the most promising nucleoside-derived inhibitor of SNM1A to date with an IC50 of 12.3 μM.

From methylarenes to Esters: Efficient oxidative Csp3-H activation promoted by CuO decorated magnetic reduced graphene oxide

Magnetic reduced graphene oxide supported CuO (rGO/Fe3O4-CuO) as the heterogeneous catalyst in cross dehydrogenative coupling (CDC) reactions has been demonstrated for the synthesis of esters using methyl aromatics, aldehydes/benzyl alcohols...

Taguchi-Assisted Optimization Technique and Density Functional Theory for Green Synthesis of a Novel Cu-MOF Derived From Caffeic Acid and Its Anticancerious Activities

In this paper, we have reported an innovative greener method for developing copper-metal organic frameworks (Cu-MOFs) using caffeic acid (CA) as a linker extracted from Satureja hortensis using ultrasonic bath. The density functional theory is used to discuss the Cu-MOF-binding reaction mechanism. In order to achieve a discrepancy between the energy levels of the interactive precursor orbitals, the molecules have been optimized using the B3LYP/6-31G method. The Taguchi method was used to optimize the key parameters for the synthesis of Cu-MOF. FT-IR, XRD, nitrogen adsorption, and SEM analyses are used to characterize it. The adsorption/desorption and SEM analyses suggested that Cu-MOF has a larger surface area of 284.94 m2/g with high porosity. Cu-MOF has shown anticancer activities against the human breast cancer (MDA-MB-468) cell lines, and it could be a potent candidate for clinical applications.

Fabrication of attapulgite/magnetic aminated chitosan composite as efficient and reusable adsorbent for Cr (VI) ions

An efficient composite was constructed based on aminated chitosan (NH2Cs), attapulgite (ATP) clay and magnetic Fe3O4 for adsorptive removal of Cr(VI) ions. The as-fabricated ATP@Fe3O4-NH2Cs composite was characterized by Fourier Transform Infrared Spectroscopy (FTIR), Thermal Gravimetric Analyzer (TGA), Scanning Electron Microscope (SEM), Zeta potential (ZP), Vibrating Sample Magnetometer (VSM), Brunauer-Emmett-Teller method (BET) and X-ray photoelectron spectroscope (XPS). A significant improve in the adsorption profile was established at pH 2 in the order of ATP@Fe3O4-NH2Cs(1:3) > ATP@Fe3O4-NH2Cs(1:1) > ATP@Fe3O4-NH2Cs(3:1) > Fe3O4-NH2Cs > ATP. The maximum removal (%) of Cr(VI) exceeded 94% within a short equilibrium time of 60 min. The adsorption process obeyed the pseudo 2nd order and followed the Langmuir isotherm model with a maximum monolayer adsorption capacity of 294.12 mg/g. In addition, thermodynamics studies elucidated that the adsorption process was spontaneous, randomness and endothermic process. Interestingly, the developed adsorbent retained respectable adsorption properties with acceptable removal efficiency exceeded 58% after ten sequential cycles of reuse. Besides, the results hypothesize that the adsorption process occurs via electrostatic interactions, reduction of Cr(VI) to Cr(III) and ion-exchanging. These findings substantiate that the ATP@Fe3O4-NH2Cs composite could be effectively applied as a reusable adsorbent for removing of Cr(VI) ions from aqueous solutions.

Catalytic C-H Bond Activation and Knoevenagel Condensation Using Pyridine-2,3-Dicarboxylate-Based Metal-Organic Frameworks

Three 1D coordination polymers (CPs) [M(pdca)(H2O)2] n (M = Zn, Cd, and Co; 1-3), and a 3D coordination framework {[(CH3)2NH2][CuK(2,3-pdca)(pa)(NO3)2]} n (4) (2,3-pdca = pyridine-2,3-dicarboxylate and pa = picolinic acid), have been synthesized adopting a solvothermal reaction strategy. The CPs have been thoroughly characterized using various spectral techniques, that is, elemental analyses, FT-IR, TGA, DSC, UV/vis, and luminescence. Structural information on 1-4 was obtained by PXRD and X-ray single-crystal analyses, whereas morphological insights were attained through FESEM, AFM, EDX, HRTEM, and BET surface area analyses. Roughness parameters were calculated from AFM analysis, whereas dimensions of small domains and interplanar spacing were defined with the aid of HRTEM. CPs 1-3 are 1D isostructural networks, whereas 4 is a 3D framework. Moreover, 1-4 display moderate luminescence at rt. In addition, 1-4 have been applied as economic and efficient porous catalysts for the Knoevenagel condensation reaction and C-H bond activation under mild conditions with good yields (95-98 and 97-99%), respectively. Notably, 1-3 can be reused up to seven cycles, whereas 4 can be reused up to five catalytic cycles with retained catalytic efficiency. Relative catalytic efficacy toward the Knoevenagel condensation reaction follows in the order 2 > 1 > 3 > 4, whereas 2 > 4 > 1 > 3 for C-H activation. The present result demonstrates synthetic, structural, optical, morphological, and catalytic aspects of 1-4.

Facile fabrication of novel magnetic ZIF-67 MOF@aminated chitosan composite beads for the adsorptive removal of Cr(VI) from aqueous solutions

Metal organic frameworks (MOFs) have become premium candidates for the removal of hazardous contaminants from wastewater. However, MOFs have a vast obstacle which is their poor recyclability. In this study, ZIF-67 was decorated with magnetic Fe₃O₄ nanoparticles, and then embedded into aminated chitosan (AmCs) matrix to form core-dual shell Fe₃O₄/ZIF-67@AmCs composite beads. Diverse analysis tools were utilized to ensure the successful fabrication of the magnetic composite beads. The fabricated magnetic composite beads were examined their adsorptive removal aptitude towards toxic Cr(VI) ions. The gained results refereed that a maximum adsorption capacity of 119.05 mg/g was attained by magnetic Fe₃O₄/ZIF-67@AmCs composite beads at 25 °C. The process obeyed both of Langmuir and Freundlich isotherm models, and the pseudo 2nd order was more suitable kinetic model to represent the adsorption process. Besides, Fe₃O₄/ZIF-67@AmCs composite showed an excellent recyclability for the removal of Cr(VI) ions from their aqueous solutions for seven consecutive cycles.

Metal–organic frameworks/biopolymer nanocomposites: from fundamentals toward recent applications in modern technology

Bio–nanocomposite compounds based on biopolymers and MOFs have presented great potential in various applications for modern technology.

Gas-Modified Pyrolysis Coke for in Situ Catalytic Cracking of Coal Tar

Modified pyrolysis coke can be used as a catalyst for tar cracking. In this paper, pyrolysis coke was used as a carrier for modification by using gases (H₂O, CO₂, and NH₃), and the optimal modified gas was selected. On the basis of this, pyrolysis coke with different modified flow rates, temperatures, and times were prepared to catalyze the cracking of tar. The effect of gas-modified pyrolysis coke on tar cracking products was studied. Also, pyrolysis coke was characterized by Fourier-transform infrared spectroscopy, Brunauer-Emmett-Teller analysis, and scanning electron microscopy. The results show that the optimal gas is H₂O, and the optimal preparation conditions are 450 mL/min, 650 °C, and 60 min. The pyrolysis coke catalyst under the optimal conditions has the best cracking effect on tar. Also, the gas and tar yields have been further improved.

New MOF/COF Hybrid as a Robust Adsorbent for Simultaneous Removal of Auramine O and Rhodamine B Dyes

In this study, by hybridization of zinc-based metal-organic framework-5 (MOF-5) and melamine-terephthaldehyde-based intergrade two-dimensional π-conjugated covalent organic framework (COF), a novel MOF-5/COF (M5C) hybrid material was prepared and characterized by Fourier transform infrared, field emission scanning electron microscopy, X-ray diffraction, and thermogravimetric analysis. MOF-5 has a well-defined cubic structure, and the proposed COF has an orderly and spherical nanosize shape. The prepared MOF-5/COF was applied as an effective adsorbent for rapid and high-efficient simultaneous removal of auramine O (AO) and rhodamine B (RB) cationic dyes via electrostatic, H-bonding, Lewis acid-base interactions, and π-π stacking from aqueous solution. The effect of experimental parameters such as pH, M5C mass, contact time, and AO and RB dyes concentration was investigated for removal efficiency and optimized. The M5C adsorbent showed an adsorption capacity of 17.95 and 16.18 mg/g for AO and RB dyes, respectively, at pH 9.5. The adsorption study of AO and RB dyes by M5C comprises both isotherm and kinetic studies. The equilibrium adsorption data followed by Langmuir isotherm and the adsorption kinetic process were found to be a pseudo-second-order model. The robustness adsorption efficiency of MOF/COF hybrids can be attributed to the formation of amide bonds between COF and MOFs, which improve the stability of the adsorbent.

Heterogeneous Electro-Fenton catalysis with HKUST-1-derived Cu@C decorated in 3D graphene network

Transition metal and nanocarbon-based composites with high activity and stability draw great attention in electro-Fenton system for organic pollutants removal. In this study, HKUST-1-derived Cu@C nanoparticles embedded within three-dimensional reduced graphene oxide (rGO) network (denoted as 3DG/Cu@C) is synthesized through a simple strategy. The prepared catalyst shows ordered 3D porous carbon structure and Cu@C NPs are uniformly dispersed in the matrix. The 3DG/Cu@C is used as heterogeneous electro-Fenton (hetero-EF) catalyst and shows outstanding performance in various persistent organic pollutants removal. High concentration Rhodamine B (RhB) (40 mg L^-1) can achieve a complete decolorization within 150 min with 25 mg L^-1 3DG/Cu@C catalyst, which is one of the lowest catalyst dosages in hetero-EF for RhB removal. More importantly, the 3DG/Cu@C achieves high RhB mineralization efficiency of 81.5% and exhibits high catalytic performance in a wide pH window from 3 to 9. The 3DG/Cu@C also remains high efficiency after five successive reaction cycles. The working mechanism study shows that RhB is mainly oxidized by ^•OH and O₂^•- radicals through hetero-EF and anodic oxidation processes. The high stability and outstanding performance of 3DG/Cu@C provide new insights in organic pollutants removal by hetero-EF process with transition metal and nanocarbon-based catalysts.

Sulphonic acid functionalized porphyrin anchored with a meso-substituted triazolium ionic liquid moiety: a heterogeneous photo-catalyst for metal/base free C–C cross-coupling and C–N/C–H activation using aryl chloride under visible light irradiation

We report an easy process to synthesize sulphonic acid functionalized porphyrin with meso-substituted triazolium ionic liquid moiety for metal/base free C–C cross-coupling and C–N/C–H activation using aryl chloride under visible light irradiation.