Compatibility of sodium alginate and konjac glucomannan and their applications in fabricating low-fat mayonnaise-like emulsion gels

Regulation of glycose and lipid metabolism and application based on the colloidal nutrition science properties of konjac glucomannan: A comprehensive review

The physicochemical properties of dietary fiber in the gastrointestinal tract, such as hydration properties, adsorption properties, rheological properties, have an important influence on the physiological process of host digestion and absorption, leading to the differences in satiety and glucose and lipid metabolisms. Based on the diversified physicochemical properties of konjac glucomannan (KGM), it is meaningful to review the relationship of structural characteristics, physicochemical properties and glycose and lipid metabolism. Firstly, this paper bypassed the category of intestinal microbes, and explained the potential of dietary fiber in regulating glucose and lipid metabolism during nutrient digestion and absorption from the perspective of colloidal nutrition. Secondly, the modification methods of KGM to regulate its physicochemical properties were discussed and the relationship between KGM's molecular structure types and glycose and lipid metabolism were summarized. Finally, based on the characteristics of KGM, the application of KGM in the main material and ingredients of fat reduction food was reviewed. We hope this work could provide theoretical basis for the study of dietary fiber colloid nutrition science.

The effect of konjac glucomannan on enzyme kinetics and fluorescence spectrometry of digestive enzymes: An in vitro research from the perspective of macromolecule crowding

Konjac glucomannan (KGM) can significantly prolong gastrointestinal digestion. However, it is still worth investigating whether the macromolecular crowding (MMC) induced by KGM is correlated with digestion. In this paper, the MMC effect was quantified by fluorescence resonance energy transfer and microrheology, and the digests of starch, protein, and oil were determined. The digestive enzymes were analyzed by enzyme reaction kinetic and fluorescence quenching. The results showed that higher molecular weight (604.85 ∼ 1002.21 kDa) KGM created a larger MMC (>0.8), and influenced the digestion of macronutrients; the digests of starch, protein, and oil all decreased significantly. MMC induced by KGM decreased the Michaelis-Menten constants (Km and Vmax) of pancreatic α-amylase (PPA), pepsin (PEP), and pancreatic lipase (PPL). The larger MMC (>0.8) induced by KGM resulted in the decrease of fluorescence quenching constants (Ksv) in PPA and PPL, and the increase of Ksv in PEP. Therefore, varying degrees of MMC induced by KGM could play a role in regulating digestion and the inhibitory effect on digestion was more significant in a relatively more crowded environment induced by KGM. This study provides theoretical support for the strategies of nutrient digestion regulation from the perspective of MMC caused by dietary fiber.

Gellan Gum as a Unique Microbial Polysaccharide: Its Characteristics, Synthesis, and Current Application Trends

Gellan gum (GG) is a linear, negatively charged exopolysaccharide that is biodegradable and non-toxic. When metallic ions are present, a hard and transparent gel is produced, which remains stable at a low pH. It exhibits high water solubility, can be easily bio-fabricated, demonstrates excellent film/hydrogel formation, is biodegradable, and shows biocompatibility. These characteristics render GG a suitable option for use in food, biomedical, and cosmetic fields. Thus, this review paper offers a concise summary of microbial polysaccharides. Moreover, an in-depth investigation of trends in different facets of GG, such as biosynthesis, chemical composition, and physical and chemical properties, is emphasized. In addition, this paper highlights the process of extracting and purifying GG. Furthermore, an in-depth discussion of the advantages and disadvantages of GG concerning other polysaccharides is presented. Moreover, the utilization of GG across different industries, such as food, medicine, pharmaceuticals, cosmetics, etc., is thoroughly examined and will greatly benefit individuals involved in this field who are seeking fresh opportunities for innovative projects in the future.

Phycocyanin-chitosan complex stabilized emulsion: Preparation, characteristics, digestibility, and stability

Phycocyanin is a natural pigment protein with antioxidant, anti-tumor, and anti-inflammatory properties, but its relatively poor emulsibility limits its use in the food industry. In order to improve the emulsifying capacity of phycocyanin, a novel phycocyanin-chitosan complex was prepared, and the characteristics, digestibility, and stability of emulsion containing oil droplets stabilized by the complex were investigated. The results showed that the phycocyanin-chitosan complex had better stability and lower interfacial tension at pH 6.5 than phycocyanin, and it significantly improved the stability of emulsion and inhibited the aggregation of oil droplets. The phycocyanin-chitosan complex stabilized emulsion showed better physical stability, digestibility, and oxidation stability than the phycocyanin emulsion. The particle size of the phycocyanin-chitosan complex stabilized emulsion was very small (from 0.1 to 2 μm), and its absolute value of zeta potential was high. Overall, this study suggests that the phycocyanin-chitosan complex effectively improved the emulsifying capacity of phycocyanin.

Advances in the construction and application of konjac glucomannan-based delivery systems

Konjac glucomannan (KGM) has been widely used to deliver bioactive components due to its naturalness, non-toxicity, excellent biodegradability, biocompatibility, and other characteristics. This review presents an overview of konjac glucomannan as a matrix, and the types of konjac glucomannan-based delivery systems (such as hydrogels, food packaging films, microencapsulation, emulsions, nanomicelles) and their construction methods are introduced in detail. Furthermore, taking polyphenol compounds, probiotics, flavor substances, fatty acids, and other components as representatives, the applied research progress of konjac glucomannan-based delivery systems in food are summarized. Finally, the prospects for research directions in konjac glucomannan-based delivery systems are examined, thereby providing a theoretical basis for expanding the application of konjac glucomannan in other industries, such as food and medicine.

Pickering emulsion with high freeze-thaw stability stabilized by xanthan gum/lysozyme nanoparticles and konjac glucomannan

In this study, freeze-thaw cycle experiments were conducted on food-grade Pickering emulsions co-stabilized with konjac glucomannan (KGM) and xanthan gum/lysozyme nanoparticles (XG/Ly NPs). The rheological properties, particle size, flocculation degree (FD), coalescence degree (CD), centrifugal stability, Differential scanning calorimetry (DSC), X-ray diffraction (XRD) and microstructure of Pickering emulsion stabilized by KGM before and after freeze-thaw were characterized. It was found that as the concentration of KGM increased, the flocculation degree (FD) and coalescence degree (CD) of the emulsion decreased after the freeze-thaw cycle compared to the control sample, and the microscopic images showed that the droplets became smaller and less affected by the freeze-thaw cycles. The rheological and water-holding properties also confirmed that the KGM-added emulsions still had a strong gel network structure and prevented the separation of the continuous and dispersed phases of the droplets after freezing and thawing. Freeze-thaw treatments had a negative effect on the stable emulsion of XG/Ly NPs, while the addition of KGM improved the freeze-thaw stability of the emulsion, which provided a theoretical basis for the development of emulsion products with high freeze-thaw stability.

Production of Novel Bigels from Cold Pressed Chia Seed Oil By-Product: Application in Low-Fat Mayonnaise

The objective of this study was to produce an innovative bigel formulation by combining glycerol monostearate (GMS) oleogel with hydrogels stabilized by various agents, including cold pressed chia seed oil by-product gum (CSG), gelatin (G), and whey protein concentrate (WPC). The findings indicated that the choice of hydrogel influenced the rheological, textural, and microstructural properties of the bigels. The G' value of the bigel samples was higher than G″, indicating that all the bigels exhibited solid-like characteristics. In order to numerically compare the dynamic rheological properties of the samples, K' and K″ values were calculated using the power law model. K' values of the samples were found to be higher than K″ values. The K' value of bigel samples was significantly affected by the hydrogel (HG)/oleogel ratio (OG) and the type of stabilizing agent used in the hydrogel formulation. As the OG ratio of bigel samples increased, the K' value increased significantly (p < 0.05). The texture values of the samples were significantly affected by the HG/OG ratio (p < 0.05). The study's findings demonstrated that utilizing CSG, G, and WPC at an OG ratio more than 50% can result in bigels with the appropriate hardness and solid character. The low-fat mayonnaise was produced by using these bigels. The low-fat mayonnaise showed shear-thinning and solid-like behavior with G' values greater than the G″ values. Low-fat mayonnaise produced with CSG bigels (CSGBs) showed similar rheological properties to the full-fat mayonnaise. The results showed that CSG could be used in a bigel formulation as a plant-based gum and CSGB could be used as a fat replacer in low-fat mayonnaise formulation.

Strong gelation capacity of a pectin-like polysaccharide in the presence of K+ ion

In the present study, a pectin-like apple polysaccharide (AP) obtained by metal precipitation technique was demonstrated to show strong gelling capacity in the presence of K+ ion upon cooling. Increasing amount of K+ addition monotonically promoted the gelation of AP, as characterized by the increased gelation temperature (Tgel), gel melting temperature (Tmelt) and the gel strength. Compared with K+ ion, Na+ was unable to induce AP gelation even at high ionic concentrations, but other monovalent cations (Rb+, Cs+) can induce the gelation as in the case of K+ addition. At room temperature, the minimum cationic concentration as required to induce AP gelation followed the order of K+ ≈ Cr+ (8 mM) > Rb+ (3.5 mM), indicating that cationic radius (Na+ < K+ < Rb+ < Cs+) played a dominant role in inducing AP gelation, but other factors may also be involved. Finally, the gelation behavior of AP in the presence of K+ was explained as the suppressed intermolecular electrostatic repulsion between AP chains due to the strong electrostatic shielding effect of K+, which led to the formation of a gel network mediated by intermolecular hydrogen bonding. This reported gelation property may allow AP to find application as a new gelling polysaccharide.

Mastering textural control in multi-polysaccharide gels: Effect of κ-carrageenan, konjac glucomannan, locust bean gum, low-acyl gellan gum, and sodium alginate

To comprehend the intricate interplay of five common food polysaccharides, κ-Carrageenan (KC), konjac glucomannan (KGM), locust bean gum (LBG), low-acyl gellan gum (LAG), and sodium alginate (SA), within composite polysaccharide gels, widely employed for textural modulation and flavor enhancement. This study systematically modulates the quantities of these five polysaccharides to yield six distinct multi-polysaccharide gels. The unique impact of each polysaccharide on the overall quality of composite gels were studied by thermostability, microstructure, water-holding capacity (WHC), texture, and sensory attributes. The findings unequivocally manifest the phenomenon of thermoreversible gelation in all composite gels, except for the KC-devoid sample, which displayed an inability to solidify. Notably, KGM, LBG, and LAG emerged as pivotal enhancers of the network structure in these composite gels, while SA was identified as a promotor of layered structure, resulting in a reduction of surface hardness. Leveraging principal component analysis (PCA) to analyzed 14 critical evaluation parameters of the five multi-polysaccharide gels, revealing the order as follows: KC > KGM > SA > LAG > LBG. These findings would imparts valuable insights into the pragmatic utilization of multi-polysaccharide gels for the development of food products (e.g. Bobo balls in milk tea) with tailored textural and sensory attributes.

Food gels: principles, interaction mechanisms and its microstructure

Food hydrogels are important materials having great scientific interest due to biocompatibility, safety and environment-friendly characteristics. In the food industry, hydrogels are widely used due to their three-dimensional crosslinked networks. Furthermore, they have attracted great attention due to their wide range of applications in the food industry, such as fat replacers, encapsulating agents, target delivery vehicles, and many more. In addition to basic and recent knowledge on food hydrogels, this review exclusively focuses on sensorial perceptions, nutritional significance, body interactions, network structures, mechanical properties, and potential hydrogel applications in food and food-based matrices. Additionally, this review highlights the structural design of hydrogels, which provide the forward-looking idea for future applications of food hydrogels (e.g., 3D or 4D printing).

Encapsulation of lutein in gelatin type A/B-chitosan systems via tunable chains and bonds from tweens: Thermal stability, rheologic property and food 2D/3D printability

Lutein could be stabilized in gelatin type A/B-chitosan systems by different polyoxyethylene sorbitan fatty acid esters (tweens) via tunable chains and bonds, and the homogeneous system held potential in food 2D/3D printing. During encapsulation of lutein in gelatin-chitosan matrix complexes, tween 40, tween 60 and tween 80 assisted in the excellent centrifugation stability, freeze-thaw stability, chemical stability as well as thermal stability. The tweens contained systems also possessed excellent rheological properties, including shearing thinning property, self-supporting characteristics, and favorable thixotropy. Especially, tween 80 performed well in facilitating the stability and rheological properties of systems with uniform micromorphology due to its long alkyl chains and carbon-carbon double bonds (two sp2 hybridized C-atoms) (from FTIR, XRD, SEM, etc.); and gelatin type B illustrated higher protection effects on lutein because of its strong electrostatic interaction with chitosan. The optimal systems could work as edible ink for 2D/3D printing on food with great UV-irradiation stability and high definition. Surimi could be modified by the optimal complex and possessed excellent shear-thinning property, proper yield stress, low dependence on frequency and stable structure, which was successfully applied for innovative 3D printing with sophisticated shapes. The practical food 2D/3D printing (like bread and surimi) demonstrated high potential in food creation and food innovation.

A new method for fabrication of gel emulsions and their application in preparation of novel porous materials

In the research of gel emulsions, it is a great challenge to develop a new method for fabrication of gel emulsions and utilize them in preparing novel porous materials containing metal complexes. In this work, we proposed to use coordination self-assemblies of two building blocks, organic ligands and metal ions, as stabilizers to prepare gel emulsions, which could be used as templates to prepare porous materials containing metal complexes. Aromatic carboxylic ligands CDCn (n = 4, 6, 8, and 10) containing cholesterol groups were designed and synthesized, and were used as organic ligands to fabricate new W/O gel emulsions through the coordination self-assembly with Tb3+/Eu3+ at the oil-water interface. The gel emulsions based on CDC6 possess injection molding properties, which were rarely seen in conventional gel emulsions. EDX mapping and XPS and FTIR analyses revealed that the coordination self-assembly of CDC6 and Tb3+ at the oil-water interface was the main driving force for the gel emulsion formation. CDC6/Tb3+/styrene/H2O gel emulsions could be further used as templates to prepare low-density porous metal complex/polymer composites with typical luminescence emissions of terbium complexes. This work extends the method for preparation of gel emulsions and develops a novel approach to obtain porous materials containing metal complexes.

Stability and Rheological Behavior of Mayonnaise-like Emulsion Co-Emulsified by Konjac Glucomannan and Whey Protein

The aim of this work was to study the physical stability and rheological properties of an oil-in-water emulsion stabilized by a konjac glucomannan-whey protein (KGM-WP) mixture at a konjac glucomannan concentration of 0.1-0.5% (w/w) and a whey protein concentration of 1.0-3.0% (w/w). The droplet size, microstructure, stackability, flow behavior, and viscoelastic properties were measured. The experimental results showed that with an increase in KGM and WP concentrations, the droplet size (D4,3) of the emulsion gradually decreased to 12.9 μm, and the macroscopic performance of the emulsion was a gel-like structure that can be inverted and resist flow and can also be extruded and stacked. The static shear viscosity and viscoelasticity generally increased with the increase of konjac glucomannan and whey protein concentration. Emulsions were pseudo-plastic fluids with shear thinning behavior (flow behavior index: 0.15 ≤ n ≤ 0.49) and exhibited viscoelastic behavior with a storage modulus (G') greater than their loss modulus (G″), indicating that the samples all had gel-like behavior (0.10 < n' < 0.22). Moreover, storage modulus and loss modulus of all samples increased with increasing KGM and WP concentrations. When the concentration of konjac glucomannan was 0.3% w/w, the emulsion had similar rheological behavior to commercial mayonnaise. These results suggested that the KGM-WP mixture can be used as an effective substitute for egg yolk to make a cholesterol-free mayonnaise-like emulsion. The knowledge obtained here had important implications for the application of protein-polysaccharide mixtures as emulsifiers/stabilizers to make mayonnaise-like emulsions in sauce and condiments.

Reversibility of freeze-thaw/re-emulsification on Pickering emulsion stabilized with gliadin/sodium caseinate nanoparticles and konjac glucomannan

The reversibility of freeze-thaw/re-emulsification of Pickering emulsion stabilized by gliadin/sodium caseinate nanoparticles (Gli/CAS NPs) was improved by adding konjac glucomannan (KGM). With the increase in the KGM concentration, the delamination of emulsions after freeze-thaw treatment was significantly improved. The microstructure showed that the presence of KGM helped to maintain the network structure of continuous phases. In particular, the particle size of the emulsion did not increase significantly after three freeze-thaw cycles when the KGM concentration was 0.6 % and the oil phase fraction was 60 %. The results of flocculation degree and coalescence degree also indicated that KGM promoted the cross-linking between particles on the surface of the droplet and increased the thickness of the interfacial film of the droplet. Rheological analysis also proved the same result: the elastic modulus of the emulsion was still larger than the viscous modulus, which showed the ideal freeze thaw reversibility. After adding KGM, the emulsion formed a strong network structure with good stability for long-term storage and reversibility for freeze-thaw cycling/re-emulsification. Thus, the emulsion has broad application prospects in food, cosmetics, and pharmaceutical fields.

Pickering emulsions synergistic stabilized with konjac glucomannan and xanthan gum/lysozyme nanoparticles: Structure, protection and gastrointestinal digestion

The effect of konjac glucomannan (KGM) on the stability and digestion characteristics of xanthan gum/lysozyme nanoparticles (XG/Ly NPs) stabilized Pickering emulsions was investigated. Results indicated that the high viscosity of KGM prompted the particles to be adsorbed toward the interface, which decreased the particle size and increased the stability of emulsions. As the concentration of KGM increased, the G' and G″ of emulsions became larger and approached a "solid-like" state. When the KGM concentration was ≥0.2 %, the large amplitude sweeps of the emulsion exhibited a "weak strain overshoot". The network structure formed by KGM molecular chain and particles was intertwined around the droplets to form a polysaccharide layer and fibrous network structure. Emulsions containing KGM showed a "spider web" epidermal network pattern. It was found by illumination for 4 h that samples with 0.2 % KGM concentration increased the retention of β-carotene by 18.74 %. KGM decreased the release rate of fatty acids and bioaccessibility by hindering bile salt and lipase adsorption.

Textural and Rheological Properties of Sliceable Ketchup

This study investigates the effect of different mixtures of gums [xanthan (Xa), konjac mannan (KM), gellan, and locust bean gum (LBG)] on the physical, rheological (steady and unsteady), and textural properties of sliceable ketchup. Each gum had an individually significant effect (p < 0.05) on viscosity; however, the addition of Xa in combination with other gums had a greater effect on viscosity. By increasing the use of Xa in ketchup formulations, the amount of syneresis decreased such that the lowest amount of syneresis related to the sample prepared with 50% Xa and 50% gellan. Although the use of different levels of gums did not have a significant effect on the brightness (L) and redness (a) indices (p < 0.05), the use of different ratios of gums had a significant effect (p < 0.05) on the yellowness (b) index. The effect of different levels of gums used had a significant effect only on firmness (p < 0.05), and their effects on other textural parameters were not statistically significant (p > 0.05). The ketchup samples produced had a shear-thinning behavior, and the Carreau model was the best model to describe the flow behavior. Based on unsteady rheology, G’ was higher than G” for all samples, and no crossover between G’ and G” was observed for any of the samples. The constant shear viscosity (η) was lower than the complex viscosity (η*), which showed the weak gel structure. The particle size distribution of the tested samples indicated the monodispersed distribution. Scanning electron microscopy confirmed the viscoelastic properties and particle size distribution.

Effects of Abelmoschus manihot gum content, heating temperature and salt ions on the texture and rheology properties of konjac gum/Abelmoschus manihot gum composite gel

To improve the gelling property of konjac gum (KGM) and enhance the application value of Abelmoschus manihot (L.) medic gum (AMG), a novel type of gel was prepared using KGM and AMG in this study. The effects of AMG content, heating temperature and salt ions on the characteristics of KGM/AMG composite gels were studied by Fourier transform infrared spectroscopy (FTIR), zeta potential, texture analysis and dynamic rheological behavior analysis. The results indicated that the AMG content, heating temperature and salt ions could affect the gel strength of KGM/AMG composite gels. Hardness, springiness, resilience, G', G* and η* of KGM/AMG composite gels increased when AMG content increased from 0 to 2.0 %, but they decreased when AMG increased from 2.0 % to 3.5 %. High-temperature treatment significantly enhanced the texture and rheological properties of KGM/AMG composite gels. The addition of salt ions reduced the zeta potential absolute value and weakened the texture and rheological properties of KGM/AMG composite gels. Furthermore, the KGM/AMG composite gels could be classified as non-covalent gels. The non-covalent linkages included hydrogen bonding and electrostatic interactions. These findings would help understand the properties and formation mechanism of KGM/AMG composite gels and help improve the application value of KGM and AMG.

A Comprehensive Review of Food Hydrogels: Principles, Formation Mechanisms, Microstructure, and Its Applications

Food hydrogels are effective materials of great interest to scientists because they are safe and beneficial to the environment. Hydrogels are widely used in the food industry due to their three-dimensional crosslinked networks. They have also attracted a considerable amount of attention because they can be used in many different ways in the food industry, for example, as fat replacers, target delivery vehicles, encapsulating agents, etc. Gels-particularly proteins and polysaccharides-have attracted the attention of food scientists due to their excellent biocompatibility, biodegradability, nutritional properties, and edibility. Thus, this review is focused on the nutritional importance, microstructure, mechanical characteristics, and food hydrogel applications of gels. This review also focuses on the structural configuration of hydrogels, which implies future potential applications in the food industry. The findings of this review confirm the application of different plant- and animal-based polysaccharide and protein sources as gelling agents. Gel network structure is improved by incorporating polysaccharides for encapsulation of bioactive compounds. Different hydrogel-based formulations are widely used for the encapsulation of bioactive compounds, food texture perception, risk monitoring, and food packaging applications.

Potential Food and Nutraceutical Applications of Alginate: A Review

Alginate is an acidic polysaccharide mainly extracted from kelp or sargassum, which comprises 40% of the dry weight of algae. It is a linear polymer consisting of β-D-mannuronic acid (M) and α-L-guluronic acid (G) with 1,4-glycosidic linkages, possessing various applications in the food and nutraceutical industries due to its unique physicochemical properties and health benefits. Additionally, alginate is able to form a gel matrix in the presence of Ca²⁺ ions. Alginate properties also affect its gelation, including its structure and experimental conditions such as pH, temperature, crosslinker concentration, residence time and ionic strength. These features of this polysaccharide have been widely used in the food industry, including in food gels, controlled-release systems and film packaging. This review comprehensively covers the analysis of alginate and discussed the potential applications of alginate in the food industry and nutraceuticals.

Development and Characterization of a Low-Fat Mayonnaise Salad Dressing Based on Arthrospira platensis Protein Concentrate and Sodium Alginate

The food industry is constantly reformulating different foods to fulfill the demands of the consumers (natural ingredients and good sensory quality). The present work aimed to produce low-fat mayonnaises using 30.0, 22.5, and 15.0% oil, 1% soy protein isolate (SPI) or spirulina (Arthrospira platensis) protein concentrate (SPC), and 2% sodium alginate. The physical properties (thermal stability, rheological behavior, and particle size), the sensory attributes (appearance, texture, taste, and acceptability), the purchase probability, and amino acid availability (after a simulated digestion) were evaluated. The mayonnaises demonstrated good thermal stability (>90%) using 22.5 and 15% oil, all products showed shear-thinning behavior and a consistency index of 20–66 Pa·s. The reduction of oil from 30 to 15% increased the particle size from 6–9 µm to 10–38 µm. The most acceptable product was the formulated with SPI and 22.5% oil (8.3 of acceptability and 79% of purchase probability). Finally, the addition of proteins improved the total essential amino acids compared to a commercial product (28 and 5 mg/25 g, respectively). In summary, it was possible to obtain well accepted products with high purchase probability using low concentrations of oil and vegetable proteins.

Physicochemical Properties, Stability and Texture of Soybean-Oil-Body-Substituted Low-Fat Mayonnaise: Effects of Thickeners and Storage Temperatures

With the increasing consumer demand for low-fat and low-cholesterol foods, low-fat mayonnaise prepared from soybean oil body (SOB) substitute for egg yolk has great consumption potential. However, based on previous studies, it was found that the stability and sensory properties of mayonnaise substituted with SOB were affected due to there being less lecithin and SOB containing more water. Therefore, this study investigated the effects of different ratios of xanthan gum, pectin and modified starch as stabilizers on the apparent viscosity, stability, texture and microstructure of SOB-substituted mayonnaise. It was found that the apparent viscosity and stability of SOB-substituted mayonnaise increased significantly when xanthan gum, pectin and modified starch were added in a ratio of 2:1:1. Meanwhile, the emulsified oil droplets of SOB-substituted mayonnaise were similar in size and uniformly dispersed in the emulsion system with different thickener formulations. In addition, the storage stability of SOB-substituted mayonnaise was explored. Compared with full egg yolk mayonnaise, SOB-substituted mayonnaise had better oxidative stability and bacteriostatic, which is important for the storage of mayonnaise. This study provided a theoretical basis for the food industry application of SOB. Meanwhile, this study provided new ideas for the development and storage of low-fat mayonnaise.

Mayonnaise main ingredients influence on its structure as an emulsion

Mayonnaise has a great potential for research and development. Today, consumers are seeking for healthier and natural food products. Generally, it is a blend of oil, egg, salt, lemon juice or vinegar and texture improvers which make its structure as oil in water emulsion. Each of mentioned ingredients has huge effects on mayonnaise emulsion quality. This paper presents information about how these components can change the mayonnaise rheological, stability and sensory attributes.

Engineering Emulsion Gels as Functional Colloids Emphasizing Food Applications: A Review

Gels are functional materials with well-defined structures (three-dimensional networks) assembled from the dispersed colloids, and capable of containing a large amount of water, oil, or air (by replacing the liquid within the gel pores), known as a hydrogel, oleogel, and aerogel, respectively. An emulsion gel is a gelled matrix filled with emulsion dispersion in which at least one phase, either continuous phase or dispersed phase forms spatial networks leading to the formation of a semisolid texture. Recently, the interest in the application of gels as functional colloids has attracted great attention in the food industry due to their tunable morphology and microstructure, promising physicochemical, mechanical, and functional properties, and superior stability, as well as controlled release, features for the encapsulated bioactive compounds. This article covers recent research progress on functional colloids (emulsion gels), including their fabrication, classification (protein-, polysaccharide-, and mixed emulsion gels), and properties specifically those related to the gel-body interactions (texture perception, digestion, and absorption), and industrial applications. The emerging applications, including encapsulation and controlled release, texture design and modification, fat replacement, and probiotics delivery are summarized. A summary of future perspectives to promote emulsion gels' use as functional colloids and delivery systems for scouting potential new applications in the food industry is also proposed. Emulsion gels are promising colloids being used to tailor breakdown behavior and sensory perception of food, as well as for the processing, transportation, and targeted release of food additives, functional ingredients, and bioactive substances with flexibility in designing structural and functional parameters.

Properties of soybean protein isolate/curdlan based emulsion gel for fat analogue: Comparison with pork backfat

To obtain an analogue of pork backfat (PBF), we combined emulsion and gel to fabricate emulsion gel, which was prepared by using soybean protein isolate (SPI) and curdlan (CL) through a facile heat-treatment method in this paper. The microstructures, rheology properties, water holding capacity and freeze-thawing stability of the emulsion gel were investigated. The results suggested that the SPI/CL-stabilized emulsion gel was thermal-irreversible, and SPI was the emulsifying agent of the emulsion gel. Oil contents significantly affect the water holding capacity and freeze-thawing stability of emulsion gel. Subsequently, the TPA, gel strength and color of emulsion gels with different oil contents were compared with PBF. The hardness, chewiness, springiness, and gel strength of emulsion gel with 10 wt% oil contents were no significant differences from that of PBF (P > 0.05). Hence, this SPI/CL based emulsion gel can be used as an analogue to PBF, providing an alternative ingredient for the development of plant-based low-fat meat products.

New insights into food O/W emulsion gels: Strategies of reinforcing mechanical properties and outlook of being applied to food 3D printing

3D printing technology has been widely used in food processing with its advantages of customized food design, personalized nutrition design, and simplified food supply chain. Food emulsion gels have application value and prospects in food 3D printing due to their promising properties, including biodegradability, biocompatibility, as well as dual characteristics of emulsions and biopolymer gels. Food emulsion gels with appropriate mechanical properties, as a new type of food inks, expand the types and functions of the inks. However, food emulsion gels without adequate reinforced mechanical properties may suffer from defects in shape, texture, mouthfeel, and functionality during 3D printing and subsequent applications. Therefore, it is necessary to summarize the strategies to improve the mechanical properties of food emulsion gels. According to the methods of characterizing the mechanical properties of emulsion gels, this article summarizes four strategies for improving the mechanical properties of emulsion gels through two ways: inside-out (reinforcement of interface and reinforcement of cross-linking) and outside-in (physical approaches and environmental regulations), as well as their basic mechanisms. The application status and future research trends of emulsion gels in food 3D printing are finally discussed.

Walnut green husk polysaccharides prevent obesity, chronic inflammatory responses, nonalcoholic fatty liver disease and colonic tissue damage in high-fat diet fed rats

High-fat (HF) diets cause obesity, gut microbial dysbiosis and associated disorders and inflammatory bowel disease (IBD) due to increased intestinal permeability, which is an important reason for chronic inflammation and oxidative stress. This study was to investigate the effects and mechanism by which walnut green husk polysaccharides (WGHP) prevents obesity, oxidative stress, inflammation, liver and colon damage in HF diet induced rats. We found that WGHP alleviated HF-induced abnormal weight gain, disordered lipid metabolism, inflammation, oxidative stress, colonic tissue injury and up-regulate the expression level of colonic tight junction protein in the rats. Besides, the administration of WGHP promoted browning of iWAT and thermogenesis in BAT of HF-fed rats, and improved gut microbiota dysbiosis by increasing the bacterial diversity and reducing the relative abundance of potential pathogenic bacteria in the colon of the rats. Furthermore, WGHP consumption not only increased the SCFAs content but also improved the relative abundance of Prevotellaceae and Allobaculum in the gut of rats. Our results suggest that the protective effect of WGHP on metabolic inflammation caused by HF may be due to the regulation of gut microbiota and SCFAs.