Determination of chemical structure of pea pectin by using pectinolytic enzymes

Fractionation of cassava pectins and their detailed structural analyses using various pectinolytic enzymes

In this study, we analyzed the pectin structure within the pulp of cassava. Cassava pectin, derived from cassava pulp treatment at 120 °C for 90 min, was separated into four fractions (CP-P, CP-SD1, CP-SD2F, and CP-SD2R) based on variations in water solubility, electrical properties, and molecular weights. Sugar composition analysis demonstrated an abundance of homogalacturonan (HG) in CP-P and CP-SD2F, rhamnogalacturonan I (RG-I) in CP-SD2R, and neutral sugars in CP-SD1. Because RG-I possesses a complex structure, we analyzed CP-SD2R using various pectinolytic enzymes. Galactose was the major sugar in CP-SD2R accounting for 49 %, of which 65 % originated from arabinogalactan I, 9 % from galactose and galactooligosaccharides, 5 % from arabinogalactan II, and 11 % from galactoarabinan. Seventy-four percent of arabinose in CP-SD2R was present as galactoarabinan. The methylation (DM) and acetylation (DAc) degrees of cassava pectin were 11 and 15 %, respectively. The HG and RG-I regions exhibited DAc values of 5 and 44 %, respectively, signifying the high DAc of RG-I compared to HG. Information derived from the structural analysis of cassava pectin will enable efficient degradation of pectin and cellulose, leading to the use of cassava pulp as a raw material for biorefineries.

Enzymatic degradation of pea fibers changes pea protein concentrate functionality

Pea proteins are gaining increased interest from both the food industry as well as from consumers. Pea protein isolates (PPI) excel at forming meat-like textures upon heating while pea protein concentrates (PPC) are more challenging to transform into highly sought-after foods. PPCs are richer in dietary fibers (DF) and are more sustainable to produce than PPI. In this work, degradative enzymes were used to modify the functionality of PPC-water blends with a focus on texturization upon heating. Three enzyme solutions containing β-glucanases, hemicellulases, pectinases, xylanase, and cellulases were added to 65 wt% PPC blends. The effect of these enzymatic pretreatments was measured by monitoring the torque in a mixing reactor during blending, differential scanning calorimetry (DSC), high-pressure shear rheology (HPSR), and DF content and size analysis. Four endothermic peaks were detected in the DSC thermograms of PPC, namely at 63 °C, 77 °C, 105 °C and 123 °C. The first three peaks were attributed to phase transition and gelation temperatures of the starches and proteins constituting PPC. No endothermic peaks were measured for PPI blends. Enzyme solutions containing β-glucanases, hemicellulases, pectinases, and xylanases increased the endothermic energy of all peaks, hinting at an effect on the gelation properties of PPC. The same enzymes decreased the resistance to flow of PPC blends and induced a shift of the weight average molecular weight (Mw) distribution of soluble dietary fibers (SDF) towards smaller values while increasing the fraction of SDF by decreasing the insoluble dietary fiber (IDF) content. The solution containing cellulases did not change the DSC results or the viscosity of the PPC mixture, nor did it affect the IDF and SDF contents. On the other hand HPSR measurements of heated PPC samples up to 125 °C showed that all tested enzyme solutions decreased the complex viscosity of PPC-water blends to values similar to PPI-water blends. We demonstrated that degradative enzymes can enhance the functionality of less refined protein-rich ingredients based on pea and other vegetal sources. Using optimized enzyme blends for targeted applications can prove to be a key changer in the development and improvement of sustainable protein-rich foods.

Review of isolation, purification, structural characteristics and bioactivities of polysaccharides from Portulaca oleracea L

Portulaca oleracea L., also known as purslane, affiliates to the Portulacaceae family. It is an herbaceous succulent annual plant distributed worldwide. P. oleracea L. is renowned for its nutritional value and medicinal value, which has been utilized for thousands of years as Traditional Chinese Medicine (TCM). The extract derived from P. oleracea L. has shown efficacy in treating various diseases, including intestinal dysfunction and inflammation. Polysaccharides from P. oleracea L. (POP) are the primary constituents of the crude extract which have been found to have various biological activities, including antioxidant, antitumor, immune-stimulating, and intestinal protective effects. While many publications have highlighted on the structural identification and bioactivity evaluation of POP, the underlying structure-activity relationship of POP still remains unclear. In view of this, this review aims to focus on the extraction, purification, structural features and bioactivities of POP. In addition, the potential structure-activity relationship and the developmental perspective for future research of POP were also explored and discussed. The current review would provide a valuable research foundation and the up-to-date information for the future development and application of POP in the field of the functional foods and medicine.

Banana Peel Derived Chitosan-Grafted Biocomposite for Recovery of NH4+ and PO43

Biomass-derived adsorbents afford accessible and inexpensive harvesting of nitrogen and phosphorus from wastewater sources. Human urine is widely accepted as a rich source of nitrogen and phosphorus. However, direct use of urine in agriculture is untenable because of its unpleasant smell, pathogen contamination, and pharmaceutical residues. In this work, we have grafted chitosan onto dried and crushed banana peel (DCBP) to generate the biocomposite DCBP/Ch. A combination of FTIR, TGA, XRD, FESEM, EDX, and NMR analyses were used to characterize DCBP/Ch and reveal condensation-aided covalent conjugation between O-H functionalities of DCBP and chitosan. The adsorption performance of DCBP/Ch toward NH4+ and PO43- is in sync with its attractive surface porosity, elevated crystallinity, and thermostability. The maximum adsorption capacity of DCBP/Ch toward NH4+/PO43- was estimated as 42.16/15.91 mg g-1 at an operating pH of 7/4, respectively, and ranks highly when compared to previously reported bioadsorbents. DCBP/Ch performs admirably when tested on artificial urine. While nitrogen and phosphorus harvesting from human urine using single techniques has been reported previously, this is the first report of a single adsorbent for recovery of NH4+ and PO43-. The environmental compatibility, ease of preparation, and economic viability of DCBP/Ch present it as an attractive candidate for deployment in waste channels.

Supramolecular structure of banana peel pectin and its transformations during extraction by acidic methods

In this study, the approaches to describe the mesh structure in the homogalacturonate domains of pectin and the effect of the native structure violations on the stabilization effectiveness of the oil-in-water emulsion were demonstrated. Pectin with a native structure was isolated from banana peel by enzymolysis of insoluble dietary fibres. This pectin was compared with pectins, which were isolated using hydrochloric and citric acids. The properties of pectins were analyzed taking into account the ratio of galacturonate units in nonsubstituted, methoxylated and calcium-pectate forms. The content of calcium-pectate units determines the density of inter-molecular crosslinking formation. The simulation results reflect the structure of rigid "egg-box" crosslinking blocks and flexible segments formed in native pectin mainly by methoxylated links. Hydrochloric acid extraction is accompanied by the destruction of the crosslinking blocks and depolymerization of pectin. Citric acid partially demineralizes the crosslinking blocks contributing to the release of macromolecular chains that do not have calcium-pectate units. The granulometric data indicates that the individual macromolecules take the thermodynamically stable form of a statistical tangle. Such conformation is an ideal basis for the formation of "host-guest" microcontainers having a hydrophilic shell and a hydrophobic core with an oil-soluble functional substance.

Molecular structures of high- and low-methoxy water-soluble polysaccharides derived from peas and their functions for stabilizing milk proteins under acidic conditions

The structural and functional properties of two different pea water-soluble polysaccharides, a high methyl-esterified (HM-SPPS; degree of methyl esterification (DMe): 71.0 %) and low methyl-esterified SPPS (LM-SPPS; DMe: 25.2 %) were investigated. The two extracts did not vary in composition and showed a weight average molecular mass of about 1,000 kDa, as measured by size exclusion chromatography equipped with a multi-angle light scattering detector. Both HM-SPPS and LM-SPPS had similar sugar compositions, with arabinose 42.2-47.1 %, glucose 26.6-31.0 %, and galacturonic acid 17.5-18.0 %, as their main sugars. Their charge varied as a function of pH. The molecular structure was observed by a scanning probe microscope and showed a straight chain structure with small branches. The structure was similar to that already reported for polysaccharides from kidney bean. SPPS molecules interact with acidified milk protein particles at pH < 4.4. There were differences between the two SPPS. LM-SPPS could stabilize a model acidified milk dispersion with minimal aggregation between pH 3.6-4.4, while HM-SPPS showed the presence of bridging flocculation caused by polysaccharide's entanglements. It was concluded that SPPS stabilizes acidified protein by steric and electrostatic repulsion.

The Preparation and Potential Bioactivities of Modified Pectins: A Review

Pectins are complex polysaccharides that are widely found in plant cells and have a variety of bioactivities. However, the high molecular weights (M_w) and complex structures of natural pectins mean that they are difficult for organisms to absorb and utilize, limiting their beneficial effects. The modification of pectins is considered to be an effective method for improving the structural characteristics and promoting the bioactivities of pectins, and even adding new bioactivities to natural pectins. This article reviews the modification methods, including chemical, physical, and enzymatic methods, for natural pectins from the perspective of their basic information, influencing factors, and product identification. Furthermore, the changes caused by modifications to the bioactivities of pectins are elucidated, including their anti-coagulant, anti-oxidant, anti-tumor, immunomodulatory, anti-inflammatory, hypoglycemic, and anti-bacterial activities and the ability to regulate the intestinal environment. Finally, suggestions and perspectives regarding the development of pectin modification are provided.

Polysaccharides of Salsola passerina: Extraction, Structural Characterization and Antioxidant Activity

The above-ground part of the Salsola passerine was found to contain ~13% (w/w) of polysaccharides extractable with water and aqueous solutions of ammonium oxalate and sodium carbonate. The fractions extracted with aqueous sodium carbonate solutions had the highest yield. The polysaccharides of majority fractions are characterized by similar monosaccharide composition; namely, galacturonic acid and arabinose residues are the principal components of their carbohydrate chains. The present study focused on the determination of antioxidant activity of the extracted polysaccharide fractions and elucidation of the structure of polysaccharides using nuclear magnetic resonance (NMR) spectroscopy. Homogalacturonan (HG), consisting of 1,4-linked residues of α-D-galactopyranosyluronic acid (GalpA), rhamnogalacturonan-I (RG-I), which contains a diglycosyl repeating unit with a strictly alternating sequence of 1,4-linked D-GalpA and 1,2-linked L-rhamnopyranose (Rhap) residues in the backbone, and arabinan, were identified as the structural units of the obtained polysaccharides. HMBC spectra showed that arabinan consisted of alternating regions formed by 3,5-substituted and 1,5-linked arabinofuranose residues, but there was no alternation of these residues in the arabinan structure. Polysaccharide fractions scavenged the 1,1-diphenyl-2-picrylhydrazyl (DPPH) radical at 0.2-1.8 mg/mL. The correlation analysis showed that the DPPH scavenging activity of polysaccharide fractions was associated with the content of phenolic compounds (PCs).

A review of extraction, purification, structural properties and biological activities of legumes polysaccharides

In recent years, polysaccharides derived from legumes polysaccharides have aroused worldwide interests. Phytochemical and pharmacological studies have studied the physicochemical properties (emulsification, stability and foaming) and demonstrated the biological activities (immune regulation, anti-oxidation, anti-tumor, hypoglycemic, hypolipidemic and intestinal flora regulation) of legumes polysaccharides. Besides, it is reported that the extraction methods will affect the structural features of polysaccharides, thus further changing their physicochemical properties and biological activities. This review appraised the available literatures described the extraction, purification, structural characterization, biological activity and functional properties of legumes polysaccharides in recent years. It can provide useful research underpinnings and updated information for the development and application of related polysaccharides in functional food and medicinal field.

Structure and functionality of Rhamnogalacturonan I in the cell wall and in solution: A review

Rhamnogalacturonan I (RG-I) belongs to the pectin family and is found in many plant cell wall types at different growth stages. It plays a significant role in cell wall and plant biomechanics and shows a gelling ability in solution. However, it has a significantly more complicated structure than smooth homogalacturonan (HG) and its variability due to plant source and physiological state contributes to the fact that RG-I's structure and function is still not so well known. Since functionality is a product of structure, we present a comprehensive review concerning the chemical structure and conformation of RG-I, its functions in plants and properties in solutions.

Effect of hydrothermal-calcium chloride treatment on pectin characteristics and related quality in green peppers during storage

Effects of hydrothermal (HT)-calcium chloride (CaCl₂) treatment on pectin characteristics and related quality in green peppers during storage were assessed. The results showed that the changes of physicochemical quality in all green peppers were similar during storage. Weight loss percentage increased, firmness, the content of free water and bound water decreased during storage. Water-soluble pectin (WSP) notably increased, but sodium carbonate-soluble pectin (SSP) and chelate-soluble pectin (CSP) decreased. Galacturonic acid (GalUA), rhamnose (Rha), galactose (Gal), and arabinose (Ara) were the crucial compositions in the backbone and branched chains of pectin in green peppers. Rha and Gal increased, but Ara decreased in pectin after storage. The changes in the ratio of Rha/GalUA, Ara/Gal, and (Gal + Ara)/Rha represented that the backbone and branched chains of pectin in green peppers depolymerized to some extent after storage. Comparing with other green peppers, HT-CaCl₂ treated green peppers posed lower weight loss percentage and WSP content, higher firmness, the content of free water, bound water, SSP, and CSP during storage. Otherwise, most pectin compositions in HT-CaCl₂ treated green peppers showed high molar ratio after storage. Hence, HT-CaCl₂ treatment was an effective way to retain pectin characteristics and related quality of green peppers, and further inhibited the softening of green peppers during storage.

Homogalacturonan and xylogalacturonan region specificity of self-cloning vector-expressed pectin methylesterases (AoPME1-3) in Aspergillus oryzae

Aspergillus oryzae is a safe microorganism that is commonly used in food production. We constructed a self-cloning vector capable of high expression in A. oryzae. Using the vector, three putative pectin methylesterase (PME) genes belonging to Carbohydrate Esterase family 8 derived from A. oryzae were expressed, and several characteristics of the gene products were examined. The effects of temperature and pH on the three enzymes (AoPME1, 2, and 3) were similar, with optimal reaction temperatures of 50 - 60 °C and optimal reaction pH range of 5 - 6. The specific activities of AoPME1, 2, and 3 for apple pectin were significantly different (34, 7,601, and 2 U/mg, respectively). When the substrate specificity was examined, AoPME1 showed high activity towards pectin derived from soybean and pea. Although AoPME2 showed little activity towards these pectins, it showed very high activity towards apple- and citrus-derived pectins. AoPME3 showed low specific activity towards all substrates tested. Sugar composition analysis revealed that apple- and citrus-derived pectins were rich in homogalacturonan, while soybean- and pea-derived pectins were rich in xylogalacturonan. When pea pectin was treated with endo-polygalacturonase or endo-xylogalacturonase in the presence of each PME, specific synergistic actions were observed (endo-polygalacturonase with AoPME1 or AoPME2 and endo-xylogalacturonase with AoPME1 or AoPME3). Thus, AoPME1 and AoPME3 hydrolyzed the methoxy group in xylogalacturonan. This is the first report of this activity in microbial enzymes. Our findings on the substrate specificity of PMEs should lead to the determination of the distribution of methoxy groups in pectin and the development of new applications in the field of food manufacturing.

Structural characteristics of three pectins isolated from white kidney bean

Three water-soluble pectic polysaccharides (WKBP-P2, P3 and P4) were isolated from white kidney bean by ion exchange combined with size-exclusion methods. The structural features were characterized by GC-MS, NMR spectroscopy and HPSEC-MALLS-RI. It was found that three pectic polysaccharides were the major water-extracted polysaccharides in white kidney bean. All the WKBP-P2, P3 and P4 were probably composed of various structural regions including homogalacturonan (HG), xylogalacturonan (XGA), rhamnogalacturonan I (RG-I) regions in backbone, and arabinan region mainly as side chain. However, these pectic polysaccharides were significantly different in molar ratios of these structural regions and molecular size. WKBP-P2 was HG-predominant pectin (partially methyl-esterified) with weight-average molecular weight (M_w) of 1.2 × 10⁴ g/mol, and contained minor RG-I, arabinan and probable XGA regions. WKBP-P3 (M_w of 4.0 × 10⁴ g/mol) primarily embraced XGA, HG, arabinan regions and minor RG-I region. WKBP-4 with highest M_w (4.5 × 10⁵ g/mol) had the most arabinan region (51.3%), which was probably the side chain linked to the backbone composed of RG-I, HG and slight XGA regions. These findings provided a structural basis for study on polysaccharides from white kidney bean, which was benefit for development of functional food.

High pressure processing accelarated the release of RG-I pectic polysaccharides from citrus peel

High pressure processing (HPP) has become a promising strategy for extracting bioactive constituents. In this study, the impact of HPP treatment at various pH values (2.0, 8.0, and 12.0) on the macromolecular, structural, antioxidant capacity, rheological characteristics and gel properties of citrus pectic polysaccharide was investigated. The results showed that pressure and pH significantly affected the yield and Rhamnogalacturonan I (RG-I) characterizations. The yields of high pressure extraction at pH 12 (28.13 %-33.95 %) were significantly higher than the yields at pH 2 (14.85 %-16.11 %) and pH 8 (8.75 %-9.65 %). The yield of HPP (500 MPa/10 min) assisted alkali extraction is more than 2 times of that of HPP assisted acid extraction. The RG-I structure ratio of HPP-alkali extraction pectic polysaccharide (74.51 %) was significantly higher than that of traditional pectin (41.83 %). The results showed that HPP assisted alkali is a potential pectic polysaccharide extraction technology.

An Atomic Force Microscopy Study on the Effect of β-Galactosidase, α-L-Rhamnosidase and α-L-Arabinofuranosidase on the Structure of Pectin Extracted from Apple Fruit Using Sodium Carbonate

The enzyme driven changes in plant cell wall structure during fruit ripening result in debranching, depolymerization and solubilization of pectin polysaccharides, which has an effect in terms of the postharvest quality losses in fruit. Atomic force microscopy (AFM) has revealed that diluted alkali soluble pectins (DASP) from fruit and vegetables have an interesting tendency to self-assemble into regular structures. However, the mechanism is not yet fully understood. The current study is aimed at investigating the role of neutral sugars, namely galactose, rhamnose and arabinose in the formation of the branched structure of DASP. β-galactosidase, α-L-rhamnosidase and α-L-arabinofuranosidase enzymes were used for the treatment of DASP extracted from Golden Delicious apple flesh (Malus domestica cv. Golden Delicious). The effects of the selective degradation of pectic polysaccharides after 15, 30, 60, 90 and 120 min of incubation were observed using AFM. The α-L-rhamnosidase enzyme activity on pectin extracted with Na2CO3 did not cause any visible or measurable degradation of the molecular structure. The moderate effects of β-galactosidase enzymatic treatment suggested the possible role of galactose in the branching of DASP molecules deposited on mica. Data obtained for α-L-arabinofuranosidase indicated the crucial role of arabinose in the formation and preservation of the highly branched structure of the DASP fraction.